allied hydraulic winches · 86-631 [email protected] 6/2013 specifications winch model...
TRANSCRIPT
Technologically superior winches from a trusted name.
Advantages:• Simple “Plug and Play”
installation – just bolt the winch to the dozer and connect the hoses.
• Motor turns only on demand – less wear and tear, quiet operation.
• Finger tip precision control – line speeds as fine as 0.5 ft/min (150 mm/min).
• Large covers for easy service access.
• Brake-Off clutch. Drive away from tethered load and keep the wire rope taut and tidy to prevent wire rope from “bird nesting”.
• Freespool allows wire rope to be pulled out easily by hand.
• Generous angle of departure to allow dozer to drive uphill or onto a trailer without the winch frame scraping the ground.
Allied Hydraulic Winches• Smooth speed control. No shock load.• “Plug and Play” easy installation.• Reliable. Derived from well-proven PTO winches.
Hydraulic Motor
Planetary Drive
Heavy-Duty Box-Section Side Frames
Built-In Hook Turner
Large Covers For Easy ServicingBrake
GeartrainCommonWith ExistingPTO Winches
GenerousAngle OfDeparture
“Plug and Play”Easy Installation
86-631 Rev 6/2013
Specifications
Winch Model H4A H5C H6H H8L H12E
Designed For
Caterpillar D3-5 D6 D6 D7 D8-9-10
Komatsu D37-39 D51 D61-D65 D85 D155, D275
John Deere 450-650, 700 700-750 750-850 950 1050
Dressta TD8-10 TD14 TD15 TD20 TD25
Case 650-850 1150 1650-2050 - -
Liebherr - - PR724-734 PR744 PR754-764
Performance Bare Drum
Maximum Line Pull* lbs (kg)38,600
(17,509)67,000
(30,391)88,800
(40,279)112,500 (51,029)
138,800 (62,959)
Line Speed @ fpm (mpm) 94 (28) 43 (13) 65 (20) 29 (9) 46 (14)
Typical Working Load of lbs (kg)20,000 (9,072)
30,000 (13,608)
40,000 (18,144)
50,000 (22,680)
80,000 (36,287)
Maximum Line Speed fpm (mpm) 100 (30) 84 (26) 73 (22) 65 (20) 80 (24)
Performance Full Drum
Maximum Line Pull* lbs (kg)22,050
(10,206)36,100
(16,375)57,500
(26,082)72,600
(32,931)96,000
(43,545)
Line Speed @ fpm (mpm) 98 (30) 80 (24) 77 (23) 47 (14) 48 (15)
Typical Working Load of lbs (kg)20,000 (9,072)
30,000 (13,608)
40,000 (18,144)
50,000 (22,680)
80,000 (36,287)
Maximum Line Speed fpm (mpm) 176 (53) 156 (48) 137 (42) 106 (32) 124 (38)
Weight (approximate)
Winch w/o wire rope lbs (kg) 1,790 (812) 1,980 (898) 2,830 (1,284) 3,400 (1,542) 4,600 (2,087)
Fairlead lbs (kg) 310 (141) 400 (181) 875 (397) 900 (408) 1,230 (558)
Drawbar lbs (kg) 30 (14) w/winch w/winch w/winch w/winch
Integral Arch lbs (kg) 420 (191) 875 (397) 1,100 (499) NA NA
Wire Rope Capacity
Barrel Diameter in (mm) 8.00 (203) 8.56 (217) 10.00 (254) 12.00 (305) 14.00 (356)
Wire Rope Diameter
1/2 (13) ft (m) 422 (129)
5/8 (16) ft (m) 277 (84) 423 (129)
3/4 (19) ft (m) 195 (59) 298 (91) 413 (126)
7/8 (22) ft (m) 215 (66) 297 (91) 430 (131)
1 (25) ft (m) 230 (70) 334 (102) 286 (87)
1 1/8 (29) ft (m) 267 (81) 229 (70)
1 1/4 (32) ft (m) 182 (55)
* Limited by available power from vehicle and breaking strength of maximum wire rope. Continuous loads should be below vehicle GVW.
Allied Systems Company21433 SW Oregon StSherwood, OR 97140 [email protected]