agitator - stirrer _ stirrer-agitator, homogenizer, homogenizing, vacuum mixing emulation and...
TRANSCRIPT
Select Language ▼
Inquiry | Sitemap | E-mail
Semi Solid-Cream-Ointment-Tooth Paste-Gel Processing
------------------------------Liquid Syrup - Processing
------------------------------CIP- WIP- Bunker WashingSystem
------------------------------Packing Line
Agitator - Stirrer
Dispersing, Suspending, Emulsifying & Homogenizing Technik for Liquid and Paste
Application & Process :
At PRISM, We design and manufacture a wide range of agitators for liquids and Paste for all
process in the pharmaceutical, chemical, food, cosmetics and similar industries. Agitators are
provided with different types of agitation components for process such as mixing, blending,
dissolution, dispersion, homogenization, reaction, fermentation, oxidation, digestion and
emulsification of liquid, paste, ointment, solution, viscous material and solid-liquid.
Agitators are designed and adapted to any vessel shape and can be implemented with or without
lower support. Different types of blades can be combined depending on the process
requirements. The sealing system are designed and adapted depending on the requirement of
the various process and start from simple retainers to double mechanical seals. Agitators are
available with different type of mounting as per suitability of the process and users requirements.
Different types of blades can be combined depending on the process requirements and various
conditions including the stirring objective, tank shape, rotating speed, viscosity, mixing blades of
different configurations should be applied for different operating objectives. Different mixing
blades follow various specifications to design and select the configurations of the blades. The
ratio of the blade to the inner diameter of the tank, angular speed of the blade top, viscosity
change during mixing process and the range of the flow volume are the factors to be considered.
There are various types of blade mixer and can be categorized into axial flow and radial flow
according to the flow pattern of the fluid in the tank. The main factors affecting mixing
performance are as below and the commonly used configurations are listed for reference:
1. Shape, diameter, sweep back angle and slant angle of the mixer blade
2. Number of layers and the vertical position of the mixer blade where it is installed
3. Rotating speed of the mixer blade
4. Shape, inner volume, number of baffles and outline dimensions of the mixing tank
4. Shape, inner volume, number of baffles and outline dimensions of the mixing tank
5. Batch operation or continuous operation.
Agitators available with different type of drives and speeds with direct motor and with gear drive
as per process requirements. Agitators are suitable for mixing volumes 5 liters to 10,000 liters.
Salient Features :
Design is cGMP – Current Good Manufacturing Practices compliance.
All contact parts AISI 316 & non contact parts AISI 304.
Capacity available for volume of 5 liters to 5,000 liters.
Available various different type of mixing blade.
Available different mounting of stirrer assembly.
1. Wall mounting
2. Telescopic Stand
3. Top of the vessels / Tanks.
4. Bottom of the Vessels / Tanks.
Can be provided Variable Speed Drive for stirrer by VFD.
Option available for Explosion proof motor and controls panel.
Homogenizer for 300L cap with Pneumatic
Lifting stand
Stirrer-Propeller blade for 300L cap with
Manual Lifting & tilting stand
Stirrer-Propeller blade for 50L & 10 L cap
with VFD & Manual lifting stand
Homogenizer for 500L cap with telescopic
stand
Propeller-Stirrer for 500L- cap- FLP with
Pneumatic lifting standHigh Shear Rivers Flow Homogenizer
High Shear Homogenizer- Rotor- Stator typePropeller Blade Stirrer mounted on top disc
/ Bottom Disc of Tank or vessels
Contact Us
Plot No. 3713, Phase IV, G.I.D.C., Vatva, Ahmedabad – 382 445, Gujarat, India.
Phone : +91-79- 29095204Mobile : +91 9825044789
News & Updates
lorum insupe gaseo harmornytesk lemon wide
two mosta biste casie tijoa nikanimola tehora lorum iponsa
Products
Semi Solid-Cream-Ointment-Tooth Paste-Gel Processing
--------------------------------------------
Liquid Syrup - Processing
--------------------------------------------
Different type mixing blade design
Mobile : +91 9825044789
Email : [email protected] : www.prismpharmamachinery.com
Click to Get More News
--------------------------------------------
CIP- WIP- Bunker WashingSystem
--------------------------------------------
Packing Line
--------------------------------------------
Home | About Us | Products | Application | Process | Certificates | Contact Us | Link Directory | Sitemap | Blog | Rss
Copyright © 2013, All right reserved by Prism Pharma Machinery.