agenda - rockwell automation · introduction and demonstration vz08 - factorytalk® view site...

Agenda28-30 August 2018 AUSTRALIA

DAY 1 - Tuesday, 28th August

8:00am Registration Open

Time Platform 1

9:00amEvent Welcome - Scott Wooldridge, Managing Director - Australia & New Zealand, Rockwell Automation

KN01 - Opening Keynote - The Impact of the Factory of the FuturePresenter: Joseph Sousa, President Asia Pacific Region, Rockwell Automation

9:45amKN02 - Beyond TomorrowPresenter: Chris Riddell, award winning global futurist and industry recognised speaker on emerging trends in our hyper connected world.

10:30am KN03 - Maximising your TechED Experience Presenter: Kevin Cole, Territory Manager, Rockwell Automation

10:45am Morning Tea

Time Platform 1 Platform 2 Knowledge Station Technology Station Discovery Station

11:00am

SY20 - ThinManager® Delivering and Managing The Connected Enterprise: Overview

IN18 - Scalable Analytics Overview NT03 - Basic Switch

and EtherNet/IP Features in Converged Plantwide Ethernet Architectures

SS12 - Introduction to Implementing Security in Industrial Control System Applications

PR14 - Controller-based Batching

12:00pmIN21 - Smart Energy Optimisation in The Connected Enterprise

S212 - Working with Smart MCCs

1:00pm Lunch

1:45pmS411 - Practical Guidelines for Drive Installation

CL15 - Smart SensingVZ12 - Introductory Lab for Distributed HMI with FactoryTalk® View Site Edition

CL13 - In-Rack Compute Module: Hands-on Experience

SY21 - ThinManager® Experience the Platform’s Power and Simplicity: Basic Lab

2:45pmIN23 - Solve System Problems with Predictive Analytics

SS06 - Smart Safety Systems

3:45pm Afternoon Tea

4:00pm

SY25 - What’s New in the Integrated Architecture® System Hardware

S311 - Designing a Safe Motor Control System

NT01 - Advanced Switch and EtherNet/IP Features in Converged Plantwide Ethernet Architectures

CL16 - Studio 5000 Logix Designer®: Advanced Lab

SS25 - Smart Safety Systems: Hands-on Lab

5:00pm

SY26 - What’s New in the Integrated Architecture® System Software

IN16 - Performance and Analytics Cloud for Machine Builders

6:00pm Day 1 Close

Rockwell Automation TechED - AustraliaAgenda

DAY 2 - Wednesday, 29th August

8:30am Registration Open


9:00amIN23 - Solve System Problems with Predictive Analytics

S421 - Challenging Drive Applications

NT01 - Advanced Switch and EtherNet/IP Features in Converged Plantwide Ethernet Architectures

SY24 - New Communications Capabilities for The Connected Enterprise


10:00am

VZ15 - Unlock Advanced Features of PanelView™ 5000 and Build Smarter Machines with Studio 5000 View Designer™

S423 - Handling Harmonics and Power Factor Considerations with Drives

11:00am Morning Tea

11:15am

NT06 - Deploy Resilient Network Architectures for The Connected Enterprise

CL21 - Application Code Manager: Introduction and Demonstration VZ08 - FactoryTalk®

View Site Edition Application: What’s NEW!

VZ11 - Introductory Lab for Designing Machine-level HMI with PanelView 5000 and Studio 5000 View Designer

IN17 - Real-time Device Level Analytics

12:15pm

SS10 - Functional Safety Standards and the Changing Compliance Landscape

AP20 - Dairy Company Milks Track-and-Trace Capabilities

S324 - Get Proactive About Protecting Your Motors with Intelligent Overloads

1:15pm Lunch

2:00pmSY28 - FactoryTalk® System Design Overview

PR04 - Introduction to the Rockwell Automation® Library of Process Objects

IN19 - Self-Serve Analytics Made Easy: Factory Talk Analytics

VZ10 - Implementing FactoryTalk® Alarms and Events

IN17 - Real-time Device Level Analytics

3:00pm

AP21 - Reforming data, security and infrastructure complexity in modern production environments.

SY18 - Studio 5000 Architect®: Introduction and Demonstration

S324 - Get Proactive About Protecting Your Motors with Intelligent Overloads

4:00pm Afternoon Tea

4:15pmSS04 - Cyber Security- Where and Why Do I Start?

IN11 - Machine Learning Fundamentals

CL05 - Introduction to FLEX 5000 I/O and Compact GuardLogix® 5380 Controller

SY09 - Integrated Condition Monitoring: Introduction and Demonstration

S221 - Simplifying Integration and Maintenance of Drives and Overloads

5:45pm Transportation to Social Event - Pick-up at Bay 4 Entrance - Australian Technology ParkBuses have been organised to transport to social event only.

6:30pm - 10:30pm

Social Event - Level 3 (North Pier Room), Jones Bay Wharf, 26-32 Pirrama Road, PyrmontSponsored by NHP Electrical Engineering Products - Sole distributor for Rockwell Automation in the South Pacific Region.

10:30pm Day 2 Close

DAY 3 - Thursday, 30th August

830am Registration Open


9:00am SY29 - Tools for Operational Excellence

SS11 - Introduction to Network Security CL20 - Application

Code Manager: Project Execution and Library Management Lab

CL16 - Studio 5000 Logix Designer®: Advanced Lab

SY21 - ThinManager® Experience the Platform’s Power and Simplicity: Basic Lab10:00am IN26 - Scalable MES

Applications

TS10 - Manage your Assets through Cloud Technology and Services

11:00am Morning Tea

11:15am

VZ09 - How to Improve Plant Operations through Better HMI Graphics

SS13 - Introduction to Machine Risk Assessment and Functional Specification Development

SY03 - FactoryTalk® AssetCentre: Basic / Advanced Lab

CL13 - In-Rack Compute Module: Hands-on Experience

TS13 - Moving Toward a Connected Enterprise by Modernising your Control and Information Systems: Hands-on Lab12:15pm

IN11 - Machine Learning Fundamentals

PR01 - PlantPAx® System - What’s New & What’s Next

1:15pm Lunch

2:00pm

SY25 - What’s New in the Integrated Architecture® System Hardware

PR17 - Introduction to Model Predictive Control IN05 - FactoryTalk®

Historian SE on Data Collection and Reporting: Basic Lab

PR09 - PlantPAx® Process Application Development


3:00pm

SY26 - What’s New in the Integrated Architecture® System Software

SY12 - Leverage Virtual Design to Build a Better System

4:00pm Event Close

Rockwell Automation TechED - AustraliaSession Descriptions

KEYNOTESession Code Title Description

KN01 Day 1 - 45mins

The Impact of the Factory of the Future Presenter: Joseph Sousa, President Asia Pacific Region, Rockwell Automation

KN02Day 1 - 45mins

Beyond Tomorrow Presenter: Chris Riddell is an award winning global futurist and industry recognised inspirational keynote speaker on emerging trends in our hyper connected world. He is a global pattern hunter, discovering and identifying how humans are changing and adapting to high speed change, unlocking insights for businesses and leaders in today’s highly disrupted digital world.

KN03 Day 1 - 15mins

Maximising your TechED Experience Presenter: Kevin Cole, Territory Manager, Rockwell Automation

APPLICATION & CASE STUDIESSession Code Title Description

AP20Day 2 - 1hr

Dairy Company Milks Track-and-Trace Capabilities

Fonterra, a leading global dairy nutrition company out of New Zealand, transformed its track-and-trace processes. The company needed a solution to reliably capture and link batch history information without slowing production or adding complexity for workers. Leveraging CPGSuite MES software from Rockwell Automation, the company developed an electronic traceability system that helps contextualize manufacturing data and ease compliance requirements. The solution reduced the time required to identify and locate any traced product across the supply chain from days to just hours.

AP21Day 2 - 1hr

Reforming data, security and infrastructure complexity in modern production environments

Extracting value from data, securing the control environment and managing Infrastructure complexity are major challenges for modern production environments. This session explores how network, data and operations architectures are evolving to address these key challenges, highlighted by Cisco examples.

CONTROLSession Code Title Description

CL05Day 2 - 1hr

Introduction to FLEX 5000 I/O and Compact GuardLogix® 5380 Controller

Looking for high performance in a small controller form factor? Come experience the scalability of our Integrated Architecture® system with the Compact GuardLogix® 5380 controller, Compact 5000™ I/O and FLEX 5000™ I/O.

Session Tracks

KEYNOTE NETWORKS SYSTEM

APPLICATION & CASE STUDIES PROCESS TECHNOLOGY & SERVICES

CONTROL SAFETY & SECURITY VISUALISATION

INFORMATION & ANALYTICS SMART MOTOR CONTROL

Denotes Lab Sessions

CL13 Day 1 - 2hrsDay 3 - 2hrs

In-Rack Compute Module: Hands-on Experience

This session will introduce and demonstrate the capabilities of our new scalable compute technology. Understand the benefits of bringing advanced compute capabilities to the rack and get hands-on experience with the 1756-Compute module. Attendees will get hands-on experience using and configuring the Application Program Interface (API) and learn the power of Logix and Windows software together.

CL15 Day 1 - 1hr

Smart Sensing Get an introduction to Allen-Bradley smart sensors and how they enable The Connected Enterprise by providing seamless visibility of your processes through the Integrated Architecture. Attendees will experience the new Allen-Bradley sensing technologies and find out how they can apply specific features to solve sample applications.

CL16Day 1 - 2hrsDay 3 - 2hrs

Studio 5000 Logix Designer®: Advanced Lab

So you've got the basics, now let's take it to the next level with this advanced Logix session. This pick-and-choose lab will allow you to explore topics of interest and quickly see how capabilities add the most value to your design. By the end of this session, you will be on your way to becoming an expert.

CL20Day 3 - 2hrs

Application Code Manager: Project Execution and Library Management Lab

Application Code Manager is a tool that enables more efficient project development with libraries of re-usable code. In this lab you can create modular objects with customisable configuration parameters using the re-usable content, allowing you to specify the pertinent information on how the object should be used within a project. Application Code Manager creates not only the coding for the modular object but also the associated visualisation, historical and alarming elements.

CL21Day 2 - 1hr

Application Code Manager: Introduction and Demonstration

This session combines presentation with an instructor-led demonstration of Studio 5000 Application Code Manager (ACM) capability. Learn how to quickly build your automation projects using reusable code stored in libraries.

INFORMATION & ANALYTICSSession Code Title Description

IN05Day 3 - 2hrs

FactoryTalk® Historian on Data Collection and Reporting: Basic Lab

Experience FactoryTalk Historian Site Edition firsthand as you learn the basic elements of system configuration, data collection, and reporting tools. In this lab, we will explore asset framework as a mechanism for structuring your data to better align with the equipment (or assets), and how to build reports in FactoryTalk VantagePoint.

IN11Day 2 - 1hrDay 3 - 1hr

Machine Learning Fundamentals Discover what machine learning is and how to apply it to help drive operational performance. Discuss how to apply Artificial Intelligence applications successfully and how to develop specific applications like energy optimisation, predictive maintenance and predictive KPIs.

IN16Day 1 - 1hr

Performance and Analytics Cloud for Machine Builders

Learn how the new FactoryTalk Analytics for machines software provides machine builders with information they need to help their end users run their machines at top performance. Review challenges faced by both machine builders and end users and understand how this cloud-based information solution enables both partners to maximise value.

IN17Day 2 - 2 x 1hr

Real-time Device Level Analytics Explore how to integrate and use our new innovative analytics and operations management products, FactoryTalk Analytics for Devices and the FactoryTalk TeamONE app. This hands-on lab introduces each product and guides you through resolving real-world problems. Bring your own mobile device and download the FactoryTalk TeamONE app beforehand to get the most from this session.

IN18Day 1 - 1hr

Scalable Analytics Overview In an Industrial Internet of Things, is your aim to collect data or to gain insight? Discover how FactoryTalk Analytics tools speed time to insight by connecting to and modeling processes, then validating, calculating and presenting actionable insights to key stakeholders at all levels of an organisation and operation.

Session Code Title Description

IN19Day 2 - 2hrs

Self-Serve Analytics Made Easy: FactoryTalk Analytics

With the ability to fuse multiple data sources and machine learning, systems become more predictive and intelligent. FactoryTalk Analytics puts analytics to work for everyone, providing secure, persona-based access to all data sources, structured or unstructured. Its configurable, easy-to-use interface allows users to self-serve data questions to solve problems and drive business outcomes.

IN21Day 1 - 1hr

Smart Energy Optimisation in The Connected Enterprise

Experience how The Connected Enterprise helps drive down your energy costs by collecting energy and production data and modelling your process

IN23Day 1 - 1hrDay 2 - 1hr

Solve System Problems with Predictive Analytics

Get an introduction to FactoryTalk Analytics for Applications and learn how it can help you predict issues. It's an Artificial Intelligence add-on module for ControlLogix products that learns and models the data in a ControlLogix application and helps predict anomalies in the process.

IN26Day 3 - 1hr

Scalable MES Applications Tap into scalable FactoryTalk MES applications that address specific manufacturing challenges, like quality, machine performance and track/trace and genealogy. Solutions can start with a single use case at the machine or work-area level, and then scale up to a larger MES solution over time as ROI is realised.

NETWORKSSession Code Title Description

NT01Day 1 - 2hrsDay 2 - 2hrs

Advanced Switch and EtherNet/IP Features in Converged Plantwide Ethernet Architectures

This hands-on lab will enable you to learn some of the advanced Stratix switch features such as Network Address Translation (NAT), VLAN segmentation, connected routing and switch resiliency capabilities. Additionally, you can use the new FactoryTalk Network Manager software to help monitor your network.

NT03Day 1 - 2hrs

Basic Switch and EtherNet/IP Features in Converged Plantwide Ethernet Architectures

Get hands-on experience integrating Stratix switches and EtherNet/IP devices into your plant network to improve reliability, manageability and overall ease of use. You will become familiar with Stratix 5700 switch hardware features, management and diagnostics tools such as Device Manager, Studio 5000 environment Add-On Profiles (AOP), FactoryTalk View software faceplates and see configuration and diagnostics of a Device Level Ring (DLR) topology.

NT06Day 2 - 1hr

Deploy Resilient Network Architectures for The Connected Enterprise

Optimisation of your plant-wide architecture requires a network infrastructure that is scalable, reliable, safe, secure, and future-ready. Learn about the Cisco and Rockwell Automation CPwE resiliency framework and multiple resiliency protocols, including DLR, REP, VSS, StackWise, PRP, and others using Stratix and Catalyst switches.

PROCESSSession Code Title Description

PR01Day 3 - 1hr

PlantPAx® System - What's New & What's Next

Learn how to leverage PlantPAx to achieve engineering efficiency and consistent project delivery. In this session, you will hear a brief overview of the PlantPAx distributed control system and you will discover the latest features being released.

PR04Day 2 - 1hr

Introduction to the Rockwell Automation® Library of Process Objects

The Rockwell Automation Library of Process Objects helps you quickly develop process solutions with rich functionality and known performance. In this session we will demonstrate how to build a control strategy using Library objects. The Library objects and their functions within a typical control system will be presented, highlighting features for operators, maintainers and engineers. Walk away understanding the value of using the Library to develop process solutions.


PR09Day 3 - 2hrs

PlantPAx® Process Application Development

In this hands-on lab, we will focus on control and visualisation aspects of PlantPAx DCS. Here you will develop a process application using PlantPAx Process Strategies. Once you have completed the setup of your controller and HMI, you will continue to build out your application by adding and configuring controller code and FactoryTalk View SE graphical elements from the latest release of the Rockwell Automation Library of Process Objects. Come learn about how PlantPAx leverages Studio 5000 Architect, Logix Designer application features such as the Logical Organiser and Program Parameters and FactoryTalk View SE features such as Alarm grouping and Alarm Roll-up.

PR14Day 1 - 2hrs

Controller-based Batching Modern batch systems must account for the growing need for architecture flexibility, true distribution of control, and scalable solutions. SequenceManager provides batch sequencing in the Logix family of controllers, adding power capability closer to the process, and opening new possibilities for skids, off network systems, and single unit control. This session will allow you to configure and run SequenceManager in Logix Designer application, FactoryTalk ViewSE, and deploy batch reports.

PR17Day 3 - 1hr

Introduction to Model Predictive Control Learn how model predictive control can optimise your process by improving quality, throughput and reducing operating costs. The session includes a demonstration of Logix based MPC as well as Pavillion8.

SAFETY & SECURITYSession Code Title Description

SS04Day 2 - 1hr

Cyber Security: Where and Why Do I Start? Securing The Connected Enterprise requires a holistic defense-in-depth approach. This discussion will address various system level scenarios with consideration to the attack continuum: prevent, detect, and respond. Attendees will better understand how to best utilise the breadth of solutions offered by Rockwell Automation and our partners. In addition, learn about developing standards and regulations around security and the Rockwell Automation approach for building security into products.

SS06Day 1 - 1hr

Smart Safety Systems In this session you will learn what makes a safety system smart, and how smart safety systems can help reduce cost, downtime and injuries. The session features a live demo of integrated safety using the Allen-Bradley® GuardLogix® Integrated Safety Controller Platform.

SS10Day 2 - 1hr

Functional Safety Standards and the Changing Compliance Landscape

This session will introduce you to functional safety standards and requirements that apply to automation equipment. Many are driven by the European Machinery Directive, but globally accepted. Understand the range of safety standards, their application, assignment of risk, and Performance Levels, and tools available to help calculate machine safety data.

SS11Day 3 - 1hr

Introduction to Network Security In this session, you will learn the basic security functions you can use today to start optimising security in your plant network. See how security features in managed switches, like port security, access control lists, and port thresholds, as well as specific capabilities of the Stratix 5950 security appliance with deep packet inspection, can help mitigate potential security risks.



SS12Day 1 - 2hrs

Introduction to Implementing Security in Industrial Control System Applications

Learn how to design and build a FactoryTalk Security infrastructure to help secure and manage access and resources in your control system. In this lab you will learn how to: configure FactoryTalk Security for the first time after a default installation; configure users and groups, system policies, and secured actions in the FactoryTalk Administration Console to manage access control and permissions; and have the opportunity to apply basic security restrictions to Studio 5000 Logix Designer projects. Topics include introduction to FactoryTalk Directory, user/group management, setting security policies in the FactoryTalk Directory, and understanding Single Sign On.

SS13Day 3 - 1hr

Introduction to Machine Risk Assessment and Functional Specification Development

Risk assessments are the basis for determining risks and corresponding mitigation. By properly identifying risks, more effective and suitable methods of safeguarding measures can be implemented. This session will showcase the process of performing plant-wide audits and machinery risk assessments, and use of available tools to streamline the process.

SS25Day 1 - 2hrsDay 2 - 2hrsDay 3 - 2hrs

Smart Safety Systems: Hands-on Lab Intelligent devices help improve insight into machinery operation and worker behaviors, while providing feedback on system operation to help reduce downtime. In this lab, you will learn programming of safety devices, design requirements for integrating additional CIP Safety enabled devices, and the impact to the safety integrity of the system.

SMART MOTOR CONTROLSession Code Title Description

S212Day 1 - 1hr

Working with Smart MCCs In this presentation learn how to speed up integration and reduce energy usage with Ethernet-enabled MCCs, Studio 5000™ and IntelliCENTER® software. Experience the ease of integrating CENTERLINE® Motor Control Centers (MCCs) with their associated components -- PowerFlex drives and E300 overload relays. See how, with a click of thebutton, the new IntelliCENTER Integration Assistant populates the Studio 5000™ I/O tree, simplifying device configuration and reducing commissioning time and errors. In addition this session also includes a walk around of a CENTERLINE 2500 MCC.

S221Day 2 - 1hr

Simplifying Integration and Maintenance of Drives and Overloads

Learn how to incorporate Allen Bradley devices into your Ethernet network simply and efficiently. Demonstrating the time-saving capabilities of Premier Integration and device control, along with how you can rapidly recover from downtime events.

S311Day 1 - 1hr

Designing a Safe Motor Control System Understand how to use a risk assessment to assign a Performance Level (PL), develop a Safety Requirements Specification, and design the safety related parts of the control system (SRP/CS).

S324 Day 2 - 2 x 1hr

Get Proactive About Protecting Your Motors with Intelligent Overloads

Electric motors are the backbone to today's industry, providing the mechanical energy needed for most manufacturing processes. From time to time, there may be instances where a motor may fail because of improper wiring, an electrical issue, a mechanical anomaly or internal motor damage. When an unplanned event like this occurs, how does your facility handle the situation? Anytime a critical motor unexpectedly stops your process, what's the revenue cost of this lost production? Offering a broad range of features in one compact package Rockwell Automation Electronic Overload Relays allow users to cost effectively manage their energy usage and protect vital components whilst being able to monitor motor performance in order to reduce operational costs and minimise the potential production downtime.


S411Day 1 - 1hr

Practical Guidelines for Drive Installation Maximise your OEE by minimising unnecessary downtime caused by incorrect installation of drives. Environmental conditions and best practices will be covered. Variable Speed Drives have increased in popularity over the last 20 years. However, the rules are different when a VSD is involved. Learn how to correctly select Circuit Breakers, when to use reactors and where to place contactors. Also learn how to ensure your VSD is reliable and safe.

S421Day 2 - 1hr

Challenging Drive Applications Get well beyond the world of simple pump and fan applications, and understand why PowerFlex drives have 2000 in-built parameters. Discover some of the more challenging and interesting applications that have been done recently using PowerFlex drives. You will gain insight into the high-end capabilities of the product.

S423Day 2 - 1hr

Handling Harmonics and Power Factor Considerations with Drives

With the majority of modern age equipment now utilising integral power supply technology which continuously chops the AC waveform, harmonics are becoming a wide spread issue. Symptoms of false tripping of circuit breakers, electrical distribution assets and cables running at high temperatures and becoming overloaded, dangerously high Neutral currents, and premature equipment failure could all be the result of harmonics distortion.

SYSTEMSession Code Title Description

SY03Day 3 - 2hrs

FactoryTalk® AssetCentre: Basic / Advanced Lab

Pick & choose basic or advanced FactoryTalk AssetCentre lab. • Basic: Beginners will learn about the core functionality of

FactoryTalk AssetCentre in a hands-on environment, how to interact with the FactoryTalk AssetCentre application, as well as how to design the foundation of a successful asset management system.

• Advanced: Users will learn what's new with Asset Inventory Agent and lifecycle management, using the new Import/Export tool for accelerated deployment, capturing and reporting on diagnostics from FactoryTalk View, version control of project files, designing a security model, and configuration and implementation of a disaster recovery strategy.

SY09Day 2 - 1hr

Integrated Condition Monitoring: Introduction and Demonstration

This session will present and demonstrate the Dynamix™ 1444 Series machine condition monitoring system. The presentation will include the system's capabilities and the applications that it can serve, including: machinery protection, production assurance, quality and predictive maintenance. Learn how to configure a Dynamix™ machine condition monitoring system for basic and advanced monitoring applications.

SY12Day 3 - 1hr

Leverage Virtual Design to Build a Better System

Virtual design can help to compress development cycles, accelerate time to market, decrease commissioning costs, and mitigate risk. This session will cover topics on concurrent development of electrical, mechanical, and control systems as well as powerful new operator training solutions available from Rockwell Automation and its partners. Change how you build your next automation system.

SY18Day 2 - 1hr

Studio 5000 Architect®: Introduction and Demonstration

Attend this session to learn about Studio 5000 Architect®, the central point within the Studio 5000® environment. The session will cover what Architect is, where it is going, and how it can save time performing tasks with multiple controllers, HMI devices, and applications.

SY20Day 1 - 1hr

ThinManager® Delivering and Managing The Connected Enterprise: Overview

The ThinManager platform is designed to simplify the way productivity content is delivered, and devices are managed within manufacturing environments. Learn how ThinManager software can revolutionise everything from the plant floor to the control room, change the way you view mobility in those areas, and deliver and manage The Connected Enterprise today. In addition, this session will introduce what's new in ThinManager.


SY21Day 1 - 2hrsDay 3 - 2hrs

ThinManager® Experience the Platform’s Power and Simplicity: Basic Lab

This lab introduces the primary building blocks of the ThinManager® platform while demonstrating its ease of use and flexible content delivery options within a FactoryTalk® environment. This session includes hands-on training with the latest Rockwell Automation® industrial grade box thin client, the VersaView® 5200.

SY24Day 2 - 2hrs

New Communications Capabilities for The Connected Enterprise

Work directly with many new FactoryTalk® Linx capabilities. Use the new Network Browser, experience redundancy shortcuts, access Logix extended tag and tag based alarm attributes and utilise the new OPC UA communications. These new features increase your productivity, enhance systems availability and enable access for OPC UA enabled components.

SY25Day 1 - 1hrDay 3 - 1hr

What's New in the Integrated Architecture® System Hardware

This session introduces the new key products and features recently released and is a preview of future enhancements to the Integrated Architecture system. Topics covered include updates to our Logix controllers, I/O, networking, safety and motion products.

SY26Day 1 - 1hrDay 3 - 1hr

What's New in the Integrated Architecture® System Software

Learn about the latest developments in the Rockwell Automation Engineering & Design Environment software along with Visualisation Software and Hardware. Look how the latest releases can reduce engineering time, reduce risk and increase productivity. Finally, take a look at what’s ahead for these product families.

SY28Day 2 - 1hr

FactoryTalk® System Design Overview

Please have a basic knowledge of how controller design and network design affect a FactoryTalk® system.

This session is a high-level overview of best practices when architecting a FactoryTalk® system. FactoryTalk® components covered will include the FactoryTalk® Services Platform, View SE, AssetCentre, Historian SE, and VantagePoint. Some application-level recommendations will be discussed, but will not be the focus of the session.

SY29Day 3 - 1hr

Tools for Operational Excellence Automation assets are becoming increasingly connected, information enabled and complex to maintain. There is pressure to reduce downtime and move maintenance from a reactive to preventive model. This session will look at the tools to help with the “Operate and Maintain” phase of the automation life cycle.

TECHNOLOGY & SERVICESSession Code Title Description

TS10Day 3 - 1hr

Manage your Assets through Cloud Technology and Services

Come see how we support your journey toward a Connected Enterprise, by enhancing your digital experience. Rockwell Automation can enable you to easily document your installed base of assets and access up-to-date information about your products, services and web applications. Come learn how the MyRockwellAutomation platform, coupled with value-added data-driven Services can deliver insights that provide value-based reporting, improved KPIs, cost-avoidance, and improved overall asset management.

TS13Day 3 - 2hrs

Moving Toward a Connected Enterprise by Modernising your Control and Information Systems: Hands-on Lab

Users of legacy control systems such as MicroLogix, SLC, and PLC-5 Controllers, PanelView Electronic Operator Interface, and RSView32 would benefit from attending this lab as it covers tips and tools that help when migrating to ControlLogix, PanelView Plus 7, and FactoryTalk View SE. Topics include Selection Tools, Bill of Material conversion, Code Translation tools, and other useful advice.

VISUALISATIONSession Code Title Description

VZ08Day 2 - 2hrs

FactoryTalk® View Site Edition Application: What's NEW!

If you are an experienced FactoryTalk® View Site Edition application developer, this lab session focuses on the features of latest releases, FactoryTalk® View 9.0 and 10.0. The topics will give you hands-on instruction for topics such as: TrendPro, RecipePro+, ControlLogix® extended properties, alarming enhancements, graphics and animation, and mobility enhancements.


VZ09Day 3 - 1hr

How to Improve Plant Operations through Better HMI Graphics

Plant operators make decisions every day which can directly influence profitability. In this session, we'll equip you with the tools you need to create meaningful graphics that present the right amount and type of visual detail to enable improved operational efficiency and promote better decision making.

VZ10Day 2 - 2hrs

Implementing FactoryTalk® Alarms andEvents

A robust alarming capability is critical to any HMI system. The alarmsystem in FactoryTalk® View Site Edition, FactoryTalk® Alarms and Events,delivers industry-leading capabilities for any size system. This handsonlab focuses on how to best implement and configure FactoryTalk®Alarms and Events with FactoryTalk® View Site Edition and Logix controllers. Users will implement the TrendPro trending control in FactoryTalk® View Site Edition to analyse and rationalise alarm data with control data in their system. Finally, users can leverage the notification tactics and strategies of WIN-911 to bring alarm data from a controller to the information layer.

VZ11Day 2 - 2hrs

Introductory Lab for Designing Machine level HMI with PanelView 5000 and Studio5000 View Designer

Learn how easy it is to create and test your next generation HMIproject using the new Studio 5000 View Designer software. This lab willintroduce you to topics such as setting up a project, creating screens,animating graphic elements, setting up navigation, setting up basicsecurity, taking advantage of pre-defined project content and testing aproject.

VZ12Day 1 - 2hrs

Introductory Lab for Distributed HMI withFactoryTalk® View Site Edition

If you are new to the FactoryTalk® View Machine Edition application, orjust need a refresher on the basics, this hands-on lab allows you to learnabout the basic capabilities and features of the FactoryTalk® MachineEdition application. Topics include creating an application, workingwith displays, understanding the basics of global objects, and workingwith tags, using tag placeholders, testing and running the application,applying graphic animations and using language switching. See howfeatures like search and replace tag and text, tag cross-reference, andother design-time enhancements can help you to get more work donein less time.

VZ15Day 2 - 1hr

Unlock Advanced Features of PanelView™5000 and Build Smarter Machines withStudio 5000 View Designer™

This session will show you best practices for re-using PanelView Plus6/7 application content when creating PanelView 5000 applicationsincluding showing advanced features like recipe handling, screencontrol from Logix controllers, graphics animations and performingmultiple actions with one touch action.

agenda - rockwell automation · introduction and demonstration vz08 - factorytalk® view site...

Documents