afinia 3d printer quick start guide11
TRANSCRIPT
-
7/30/2019 Afinia 3D Printer Quick Start Guide11
1/2
12.0www.afinia.com
Unpackagingfor Windows and Mac OS X
Afinia 3D Printer
Unpacking Your Afin ia 3D PrinterYour Afinia 3D Printer comes with the Installation Disc, Manual, Unpack and Setup Guide(this document), and an Accessory Pack. Remove these items before removing the Printerfrom the box.
Carefully lift the Printer and foam from the box, removing the foam while supportingthe printer.
There are two packaging clips on the Printer that are used to hold the platformand extruder assembly in place during shipping. These clips must be removedbefore the Printer is powered on.
Turn the Printer so the back is facing you.
The first clip will be just below the extruderassembly, held in place with tape.Remove the tape, the slide the clip down
to remove it.
Save the packaging clips! It is highly recommended that you reinstall these
two clips if you need to ship the Printer in the future.
The second clip is holding the Z-axis armdown. Gently lift the X-axis arm a few inches.
Do not lift the arm by the platform as this may affectthe levelling of the platform!
Once the arm is raised, rotate the top of the clip
towards the front of the Printer. The clip will slideoff the arm once it is in the correct position.
Accessory Pack ContentsNext, open the Accessory Pack and verify the contents with those listed below:
You will need the Filament Hanger, Filament Spool, Filament Tube, Hex Wrenches, Power Supply and Power Cable, anCable to complete the Hardware Setup and Installation. Please follow the instructions on the other side of this docum
For more detailed information on the Setup and Installation process, please review the Afinia 3D Printer Users Manua
1. Spool of Filament (1, Natural)
2. Power Supply
3. Power Cable
4. USB Cable
5. FR-4 (Perf) Board
6. FR-4 Board Clips (6)
7. FR-4 Board Cleaning Tool (3)
8. Filament Guide Tube
9. Filament Hanger
10. Nozzle Wrench
11. Hex Wrenches
12. Spare screws & washers
13. Gloves (1 pair)
14. Putty Knife
15. Exacto Knife and blad
16. Snipping Pliers
17. Tweezers
1
2
3
4
8
7
5
12 1116
13
17
14
15
10
6
9
-
7/30/2019 Afinia 3D Printer Quick Start Guide11
2/2