ac5215 ifm.pdf
DESCRIPTION
ifmTRANSCRIPT
-
Operating instructions ClassicLine module
AC5203 / AC5205 AC5208 / AC5211AC5213 / AC5214AC5215 / AC5224
AC5294
7390
951/
00
08/2
012
UK
-
2Contents1 Preliminary note 32 Safety instructions 33 Functions and features 34 Installation45 Operating and display elements 96 Addressing 9
61 Addressing with the AC1154 addressing unit97 Electrical connection 148 Operation 159 Technical data 15
-
3UK
1 Preliminary note Aninstructionisindicatedby:
Example:Mounttheunitasshown. Areactiontotheactionisindicatedby>:
Example:>yellowLEDlights.
Important note Non-compliance can result in malfunction or interference
Information Supplementary note
2 Safety instructions Please read the operating instructions prior to set-up of the device Ensure that
the product is suitable for your application without any restrictions The unit conforms to the relevant regulations and EC directives Improper or non-intended use may lead to malfunctions of the unit or to
unwanted effects in your application Installation, electrical connection, set-up, operation and maintenance of the
unit must only be carried out by qualified personnel authorised by the machine operator
3 Functions and features maximumnumberofmodulespermaster:
- 31 (AC5205, AC5208, AC5211, AC5213) - 62 (AC5203, AC5214, AC5215, AC5224, AC5294)
AS-interface version 30, downward compatible
-
44 Installation Disconnectthesystemfrompowerbeforeinstallation.
1 Alignment of the flat cable on deliveryCarefully place the yellow and optio-nally the black AS-i flat cable into the profile slot
2 Mounttheupperpart.
3 Lock the unit
-
5UK
With the supplied lower part the flat cable can be aligned in three direc-tionsFor the requested direction place the flat cable guide (1) accordingly
-
6A Settings at the lower partSelect the position 1, 2 or 3 depending on the requested flat cable alignment ().A = factory setting
B
C
-
7UK
Settings at the upper partThen set the selected position at the upper part To do so, turn the triangle tothecorrespondingnumber(fig.D1andD2).
D1 Use a tool, eg a screwdriver (figure D1)ortheyellow/blackflatcableguide(figureD2).
D2
-
8Open the unitOpen the unit using a tool as shown (eg screwdriver)
Take care in laying the AS-i flat cable, the flat cable should be laid straight for about 15 cm
-
9UK
5 Operating and display elements
1
2
3
4
56
7
1: addressing interface2: LEDAUX3: 4M12sockets4: LED25: LED16: labels7: LEDPWR
6 AddressingThe address is set to 0 at the factory
6.1 Addressing with the AC1154 addressing unitWhen mounted and wired the module can be addressed with the addressing cable (E70213) via the integrated addressing interfaceIf a slave with the extended addressing mode (AC5203, AC5214, AC5215, AC5224, AC5294) is used in combination with a master of the first generation (version2.0),theparameterP3mustbe1andtheoutputbitD3mustbe0*.TheoutputbitD3andtheparameterbitP3mustnotbeused. **defaultsettingIf a slave with the extended addressing mode is used in combination with a master of the first generation (version 20), an address between 1A and 31A must be assigned to this slave
-
10
AC52033 outputs AS-iprofileS-8.A.E/extendedaddressingmode:yes
Data bit D0 D1 D2 D3Output 1 2 3 -Socket O-1/2 O-1/2 O-2 O-3 -
Y-circuit outputs
AC52054 inputs AS-iprofileS-0.0.E/extendedaddressingmode:no
Data bit D0 D1 D2 D3Input I1 I2 I3 I4Socket I-1 I-2 I-3 I-4
Inputs
-
11
UK
AC52084 outputs AS-iprofileS-8.0.E/extendedaddressingmode:no
Data bit D0 D1 D2 D3Output O1 O2 O3 O4Socket O-1/2 O-1/2 O-2 O-3/4 O-3/4 O-4
Y-circuit outputs
AC52112 inputs / 2 outputs (2 Ampre)AS-iprofileS-3.0.E/extendedaddressingmode:no
Data bit D0 D1 D2 D3Input I1 I2 - -Socket I-1 I-2 - -
Output - - O3 O4Socket - - O-3/4 O-3/4 O-4
Inputs Y-circuit outputs
-
12
AC52134 outputs (2 Ampre)AS-iprofileS-8.0.E/extendedaddressingmode:no
Data bit D0 D1 D2 D3Output O1 O2 O3 O4Socket O-1/2 O-1/2 O-2 O-3/4 O-3/4 O-4
Y-circuit outputs
AC52142 outputs / 2 inputsAS-iprofileS-B.A.E/extendedaddressingmode:yes
Data bit D0 D1 D2 D3Input - - I3 I4Socket - - I-3/4 I-3/4 I-4
Output O1 O2 - -Socket O-1/2 O-1/2 O-2 - -
Y-circuit inputs Y-circuit outputs
-
13
UK
AC52154 inputs AS-iprofileS-0.A.E/extendedaddressingmode:yes
Data bit D0 D1 D2 D3Input I1 I2 I3 I4Socket I-1/2 I-1/2 I-2 I-3/4 I-3/4 I-4
Y-circuit inputs
AC52242 outputs (outputs supplied from AS-i) / 2 inputsAS-iprofileS-B.A.E/extendedaddressingmode:yes
Data bit D0 D1 D2 D3Input - - I3 I4Socket - - I-3/4 I-3/4 I-4
Output O1 O2 - -Socket O-1/2 O-1/2 O-2 - -
Y-circuit inputs Y-circuit outputs
-
14
AC52944 inputs AS-iprofileS-0.A.E/extendedaddressingmode:yes
Data bit D0 D1 D2 D3Input I1 I2 I3 I4Socket I-1 I-2 I-3 I-4
Inputs
7 Electrical connectionThe unit must be connected by a qualified electricianThe national and international regulations for the installation of electrical equipment must be adhered to
Disconnectpower. Connect the unit
Connecttheplugsofthesensors/actuatorstotheM12sockets,tighteningtorque0.6...0.8Nm.Covertheunusedsocketswithprotectivecaps(E73004)*,the addressing socket with the supplied protective cap Tightening torque 0608 NmTo guarantee protection rating IP 67 you also have to usetheflatcableendseal(E70413)*ifthemoduleisattheendofthecable
line *tobeorderedseparately
-
15
UK
8 OperationAvoid build-up of dirt and dust on the upper and lower parts so that the locking mechanism is not affected
LED2yellow: input / output switched LEDPWRgreen: AS-i voltage supply ok LEDAUXgreen: AUXvoltagesupplyok(AC5203,AC5208,
AC5211, AC5213, AC5214) LEDFAULTredlights: AS-i communication error, slave does not par-
ticipateinthenormalexchangeofdata,e.g.slave address 0
LEDFAULTredflashes: peripheral fault, eg sensor supply / output overloaded or shorted
LED1yellow: logic state of the outputs
Overload and short circuit of the input supply and the outputs are signalled as peripheral fault to the AS-i master (version 21 or higher)
9 Technical dataTechnical data and further information at wwwifmcom
1Preliminary note2Safety instructions3Functions and features4Installation5Operating and display elements6Addressing6.1Addressing with the AC1154 addressing unit
7Electrical connection8Operation9Technical data