ac & dc motors & drives - royce cross · variable speed dc motor controls ... industry in...
TRANSCRIPT
www.baldor.com.au
AC & DC Motors & DrivesAustralian Stock Catalogue: 1st January, 2007
IP67 Stainless Steel Wash-Down Duty AC, Servo & Linear Motors, Gear Reducers & Gearheads
There’s a lot more to Baldor Stainless Steel products than just the casing.
➤ All Baldor Stainless Steel motors meet MEPS Minimum or High Efficiency standards for eco-friendly, lower cost operation.
➤ All exterior motor surfaces, shaft and hardware are 300 series stainless steel, (non-metallic fan on TEFC models), USDA approved. Easily withstand cleaning using caustic materials at pressures up to 103bar (1500PSI).
➤ Epoxy coated rotor.➤ Labyrinth seals on all through shafts.➤ Patented external shaft slinger and
seal.
➤ Double-sealed ball bearings.➤ O-ring seals between endplates and
frame.➤ Machined drip grooves in endplates.➤ Lipped and gasketed conduit box lid.➤ Conduit box continuously welded to the
frame.➤ Class F insulation, Class B temperature
rise.➤ Motor data etched to body instead of
nameplate.
➤ Baldor Stainless Steel Gear Reducers are completely sealed with internal expansion bladder and lifetime lubrication. Output bearing covers are sealed with O-rings. Double lip-rubber jacketed shaft seals.
www.baldor.com.au
31300 BALDOR ✆ 1300 225 367
Catalogue Overview
Table of ContentsProduct Description ..................................................... PageTable of Contents ........................................................................................................ 3Thyristor Drive dc Motors to 5.5kW Permanent Magnet – Shunt Wound – Wash-Down Duty ....................................... 4 – 6Tachometer-Generators & Mounting Accessories dc Tachometer-Generators – Tach-gen & Encoder Mounting Kits for dc Motors ................. 7Low Voltage dc Motors & Controls Battery Powered Motors and Controls, 12, 24 & 48Vdc Solar Powered Motors 29 Vdc & 58 Vdc ............................................................ 8 – 9dc Motors 4.7kW to 187kW dc Shunt Wound Thyristor Control Motors ................................................................. 10Line Regenerative dc digital Controls Series ‘20H’ Variable Speed dc Controls for 20A to 960A .......................................... 11dc Gearmotors Parallel Shaft – Right Angle Drive .................................................................. 12 – 13KB Variable Speed dc Motor Controls & Accessories Variable Speed dc Motor Controls ................................................................... 14 – 16 Accessories for KB Controls ............................................................................ 17 – 18Programmable Relays GENESIS Programmable Relays ............................................................................... 19ac Inverter Controls & Accessories ‘KBVF’ Inverter Drive Controls, 0.37kW and 0.75kW ................................................. 20 ‘KBAC’ Inverter Drive Controls, 0.75kW ................................................................... 21 KB GENESIS ac Inverter Variable Speed Drives ................................................. 22 – 24ac Motor Control Products ac Soft-Start Module Type ‘M’ – 8 Amps to 840 Amps .............................................. 25 Electronic Motor Brake – 1 Phase ........................................................................... 25Baldor Harmonised Drive Systems H2 Series Inverter & Vector Controls ............................................................... 26 –29 H1 Series ‘ID15H’ ac Inverter Drive Controls ............................................................ 30 H1 Series ‘ZD18H’ ac Flux Vector Drive Controls ....................................................... 31 Accessories for ‘H’ Drives, Braking, Blower, Encoder, Cables, EMC/EMI Filters ....... 31 – 33 ac Flux Vector & Inverter Drive Motors ..................................................................... 34 Line Regenerative ac Inverter & Flux Vector Drives .................................................... 35 Line Reactors, Inductors & Shielded Cables ............................................................... 36Ratio Multiplier/ac Motor Accessories/Lubricants Baldor Size 1 Parallel Shaft Ratio Multipliers ............................................................. 37 Encoder, Resolver & Blower Kits for ac Motors .......................................................... 37 High Performance Grease and Oil Products ............................................................... 37Super-E® Super Efficient ac Motors Super Efficient ac 3 Phase Induction Motors – 1.1kW to 187kW ........................ 38 – 39Energy Efficient ac Motors IEC Frame ac Induction Motors – 3 Phase, 2, 4 & 6 Pole – 0.18 to 7.5kW ......... 40 – 41 NEMA Frame ac Induction Motors – 1 and 3 Phase, 0.18kW to 15kW ........................ 42 IEC Frame ac Induction Motors – 1 Phase, 0.18 to 1.5kW ........................................ 43 Commercial Duty Fan, Blower & Condenser Motors – 1 Phase NEMA Frame .................. 43Stainless Steel, Paint Free & Wash-Down Duty ac Motors Stainless Steel & Paint Free Wash-Down Duty ac Motors ............................................ 44 DirtyDutyWD® ac Wash-Down Duty Motors ............................................................. 45 Wash-Down Duty ac Motors Foot or Flange Mount – TENV or TEFC .............................. 46ac Gearmotors Parallel Shaft – 1 Phase & 3 Phase ............................................................... 47 – 48 Right Angle Shaft 1 Phase & 3 Phase ..................................................................... 49Spare Parts for dc Motors Brushes, Holders, Caps & Springs ........................................................................... 50
All prices and specifications are subject to correction and/or alteration without prior notice.
What’s New? Dear Baldor Customer, The 2007 edition of the Baldor 501A ac & dc Motors & Drives Catalogue contains many new products and expanded product ranges. Our new generation H2 Inverter and Vector Drives include many industry leading features, and are the result of our continued research and development initiatives and our resolve to ensure that Baldor products provide the best solutions and value for our customers. Details can be seen on page 26 to 29 and the back cover. Energy efficiency for industrial motors has now become compulsory, something that Baldor has been advocating for years. Our Super-E™ Motors continue to lead the industry in motor efficiency and quality. We have also expanded our motor and drives audit services where we provide efficiency information on currently installed motors throughout a clients facilities. During an energy audit, our experienced engineering department measures the load characteristics of each motor and/or drive to determine the efficiency. This information is then presented in a summary, detailing the energy savings that can be made by replacing the unit with the latest Baldor technology. Each motor and/or drive is also tagged with its relevant data, recommended Baldor replacement, and the annual energy savings that can be achieved. Please contact us for further information on the Baldor Energy Management Plan (BEMP)
If you are also involved with automation or motion control, the separate Baldor Servo Products and Positioning Systems catalogue is invaluable. Please contact your nearest Baldor office and ask for a current copy, or download a digital copy (Adobe Acrobat PDF format) from www.baldor.com.auWe have also introduced our new national sales hot-line. Call:
1300 BALDOR to be connected to your nearest Baldor office.
Baldor …driving Australian industry into the future!
FREE ENERGY AUDIT**conditions apply
4 1300 BALDOR ✆ 1300 225 367
dc Variable Speed Motors
Type VP3xxxx
Thyristor Drive dc Motors➤ IEC Frame ➤ Metric Flange, B5 or *B14 ➤ Permanent Magnet➤ TEFC or TENV ➤ IP54➤ Continuous Duty➤ Class F Insulation➤ 20:1 Speed Range with Constant Torque➤ Integral Tachometer fitted to motors
with ‘VPT’ prefix
MotorkW
Baserpm
IECFrame
ArmVdc
ArmFLAmps
Approxkgs
CatalogueNumber
TypeNumber
ListPrice
Group
0.15 1750 D56-B14 180 1.1 3 *VP1356-14¥ 135 409 K0.15 1750 D63-B14 180 1.1 4.7 *VP7424-14¥ 135 409 K0.15 1750 D63D 180 1.1 4.9 VP7424D¥ 135 413 K0.18 3000 D63D 180 1.2 5.0 VP7428D¥ 135 409 K0.18 1750 D63D 180 1.25 11.4 VP3312D¥ 3320P 455 K0.18 1750 D63-B14 180 1.25 11 *VP3312-14¥ 3320P 455 K0.18 1750 D71D 180 1.25 11.0 VP3311D¥ 3320P 440 K0.25 3000 D71D 180 1.7 13.0 VP3318D¥ 3320P 440 K0.25 1750 D71D 180 1.6 13.0 VP3316D¥ 3327P 501 K0.37 3000 D63D 180 2.5 12.0 VP3327D^ 3327P 496 K0.37 3000 D71D 180 2.5 14.0 VP3328D¥ 3327P 496 K0.37 3000 D71-B14 180 2.5 14.0 *VP3428-14➀ 3416P 496 K0.37 1750 D71D 180 2.5 14.0 VP3326D¥ 3336P 541 K0.37 1750 D71-B14 180 2.5 14 *VP3326-14¥➁ 3336P 541 K0.37 1750 D71D 180 2.5 18.0 VPT3326D¥ 3336P 1,040 K0.56 3000 D71D 180 3.5 17.0 VP3437D 3420P 560 K0.56 1750 D80-B14 180 3.7 19.0 *VP3436-14 3428P 683 K0.56 1750 D80D 180 3.7 19.1 VP3436D 3428P 683 K0.56 3000 D80D 180 3.6 18.0 VP3439D 3420P 566 K0.56 3000 D80-B14 180 3.6 18.0 *VP3439-14➁ 3420P 566 K0.56 1750 D71D 180 3.7 19.0 VP3438D 3428P 669 K0.75 3000 D80D 180 5.1 19.0 VP3458D 3428P 683 K0.75 3000 D80-B14 180 5.1 19.0 *VP3458-14➁ 3428P 683 K0.75 1750 D80-B14 180 5.0 20 *VP3455-14➁ 3435P 813 K0.75 1750 D80D 180 5.0 21.2 VP3455D 3435P 813 K0.75 1750 D80D 180 5.0 25.4 VPT3455D 3435P 1,283 K1.1 3000 D90D 180 7.7 21.2 VP3468D 3432P 695 L-11.1 3000 D80-B14 180 7.7 21.2 *VP3468-14➁ 3432P 695 L-11.1 1750 D90-B14 180 7.7 33.2 *VP3575-14➁ 3536P 1,208 L-11.1 1750 D90D 180 7.7 31.5 VP3575D 3536P 1,208 L-11.5 3000 D90D 180 10.0 31.5 VP3588D 3536P 1,208 L-11.5 3000 D90-B14 180 10 31.5 *VP3588-14➁ 3536P 1,208 L-11.5 1750 D90D 180 9.6 35.0 VP3585D 3548P 1,341 L-11.5 1750 D90-B14 180 9.6 35.0 *VP3585-14➁ 3548P 1,341 L-11.5 1750 D90D 180 9.6 37.0 VPT3585D 3548P 1,761 L-12.2 1750 D112D 180 14.0 58.0 VP3603D 3649P 1,940 L-12.2 1750 D112SD 180 14.0 59.0 VPT3603D 3649P 2,269 L-13.7 1750 D112D 180 24.5 75 VP3605D 3681P 2,455 L-1
Prefix ‘V’ = IEC metric flange and non standard foot mount. Prefix ‘- - T’ = Tachometer fitted 50 Vdc/kRPM. ¥ Indicates TENV.*Frame/B14 motors have feet and IEC ‘B14 - C’ face. Type 3000 and larger will accept Tach mounting kits.^ = Does not accept Tachometer mounting kits. ➀ Shaft centre height = 76mm. ➁ Shaft centre height = 89mm.
NEW
NEW
NEW
NEW
NEW
NEW
NEW
NEW
dc Motor Controls
Page 14 to 18
dc Spares
Page 50
51300 BALDOR ✆ 1300 225 367
dc Variable Speed Motors
Wash-Down Dutydc Motors➤ IEC Frame, B5 Metric Flange➤ Permanent Magnet ➤ Variable Speed➤ USDA Approved ➤ Stainless Steel Shaft and Hardware➤ Suitable for constant high pressure
wash-down ➤ High performance JM Clipper seal ➤ Epoxy paint inside and out
Thyristor Drive dc Motors➤ IEC Frame, B5 Metric Flange➤ Shunt Wound ➤ Class F Insulation ➤ Continuous Duty ➤ IP54 ➤ TEFC➤ 20:1 Speed Range with Constant Torque
MotorkW
Baserpm
IECFrame
ArmVdc
FieldVdc
ArmFLAmps
FieldFLAmps
Approxkgs
CatalogueNumber
TypeNumber
ListPrice
Group
.37 1750 D71D 180 200/100 2.6 0.25 13.2 VD3451D 3420D 556 K
.75 1750 D80D 180 200/100 5.0 0.30 29.0 VD5318D 3535D 1,038 K
1.5 1750 D112D 180 200/100 11.0 0.50 51.0 VD6202D 3646D 1,887 L-1
2.2 1750 D132D 180 200/100 14.5 0.40 75.0 VD7503D 7544D 2,541 L-1
Type 3646D motors and larger have a thermostat (normally closed) in the winding. Other Voltages available on request.Prefix “V” = IEC metric flange and foot mount. Type 3400 and larger will accept Tach mounting kits.
dc MotorkW
Baserpm
IECFrame
ArmatureVdc
ArmatureFL Amps
Approx.kg
CatalogueNumber
TypeNumber
ListPrice
Group
.18 1750 D63D 180 1.25 12.0 VPWD3312D¥ 3320P 546 K
.37 1750 D71D 180 2.5 16.1 VPWD3326D¥ 3336P 728 K
.75 3000 D80D 180 5.1 18.6 VPWD3458D 3428P 832 K
.75 1750 D80D 180 5.0 22.0 VPWD3455D 3435P 1,037 K
1.5 1750 D90D 180 9.6 35.5 VPWD3585D 3548P 1,726 L-1
¥ Indicates TENV.
Type 3420D
Type 3320P
dc Motor Controls
Page 14 to 18
dc Spares
Page 50
dc Motor Controls
Page 14 to 18
dc Spares
Page 50
6 1300 BALDOR ✆ 1300 225 367
Type 3336P
Type 3420D
Thyristor Drive dc Motors➤ NEMA Frame with NEMA C Face & Foot
Mount ➤ Permanent Magnet➤ Continuous Duty➤ TEFC or TENV ➤ IP54➤ 20:1 Speed Range with Constant Torque➤ Integral Tachometer fitted to motors
with ‘CDPT’ prefix
Thyristor Drive dc Motors➤ NEMA Frame ➤ TEFC ➤ IP54 ➤ Shunt Wound➤ Continuous Duty➤ Class F Insulation➤ 20:1 Speed Range with Constant Torque
MotorkW
Baserpm
NEMAFrame
ArmVdc
ArmFLAmps
Approxkgs
CatalogueNumber
TypeNumber
ListPrice
Group
.05 1725 — 180 0.39 2.3 AP233021¥ 2318P-0 288 K
.09 1725 — 180 0.65 4.7 AP7421¥ 2424P 361 K
.18 3450 — 180 1.3 5.0 AP7422¥ 2424P 361 K
.18 1750 56C 90 2.5 10.9 CDP3310¥ 3320P 440 K
.18 1750 56C 180 1.25 11.0 CDP3306¥ 3320P 440 K
.25 1750 56C 90 3.2 12.2 CDP3320¥ 3327P 502 K
.25 1750 56C 180 1.6 12.2 CDP3316¥ 3327P 502 K
.37 1750 56C 90 4.8 14.6 CDP3330¥ 3336P 567 K
.37 1750 56C 180 2.5 14.1 CDP3326¥ 3336P 567 K
.56 1750 56C 90 7.0 17.7 CDP3440 3428P 684 K
.56 1750 56C 180 3.7 17.4 CDP3436 3428P 684 K
.75 1750 56C 90 10.0 20.0 CDP3445 3435P 813 K
.75 1750 56C 180 5.0 20.0 CDP3455 3435P 813 K
.75 1750 56C 180 5.0 22.8 CDPT3455 3435P 1,240 K
1.1 1750 145TC 180 7.7 30.5 CDP3575 3536P 1,209 L-1
1.5 1750 145TC 180 9.6 33.7 CDP3585 3548P 1,341 L-1
2.2 1750 184TC 180 14.0 51 CDP3603 3649P 1,940 L-1
3.7 1750 184TC 180 24.5 74.1 CDP3605 3688P 2,455 L-1
Prefix “A”= Feet only, “CD” motors have NEMA “C” face and removable rigid base. Type 3000 and larger will accept Tach mounting kits. “- - - T” = Tachometer fitted 50 Vdc/kRPM. ¥ Indicates TENV motor.
MotorkW
Baserpm
NEMAFrame
ArmVdc
FieldVdc
ArmFLAmps
FieldFLAmps
Approxkgs
CatalogueNumber
TypeNumber
ListPrice
Group
.18 1750 56C 180 200/100 1.3 0.25 10.4 CD3426 3413D 501 K
.25 1750 56C 180 200/100 1.9 0.21 10.9 CD3434 3413D 548 K
.37 1750 56C 180 200/100 2.6 0.25 13.2 CD3451 3420D 619 K
.56 1750 56C 180 200/100 3.9 0.30 15.5 CD3476 3428D 737 K
.75 1750 56C 180 200/100 5.0 0.30 24 CD5318 3535D 1,048 K
1.1 1750 184C 180 200/100 7.8 0.40 38.2 CD6215 3636D 1,510 L-1
1.5 1750 184C 180 200/100 11.0 0.50 44.6 CD6202 3646D 1,906 L-1
2.2 1750 215C 180 200/100 14.5 0.40 82 CD7503 7544D 2,668 L-1
3.7 1750 256UC 180 200/100 23.0 1.00 138.2 CD9105 9154D 4,801 L-2
3.7 1750 254UC 330 360 13.3 0.60 100 CD9104 9143D 3,000d L-2
5.5 1750 256U 330 360 20.0 0.60 141 D9176 9154D 3,000d L-2
Type 3636D motors and larger have a thermostat (normally closed) in the winding. Type 3400 and larger will accept Tach mounting kits. Prefix “D” = Foot mount only, “CD” motors have NEMA “C” face and removable rigid base.d – To be discontinued when existing stock is depleted. Price available for existing stock only.
dc Variable Speed Motors
dc Motor Controls
Page 14 to 18
dc Spares
Page 50
56C F
ace Ratio Multipliers
See Page 37
dc Motor Controls
Page 14 to 18
dc Spares
Page 50
56C F
ace Ratio Multipliers
See Page 37
71300 BALDOR ✆ 1300 225 367
Type PTG50XP
dc Tachometer-Generators
Tacho-Generator & Encoder Mounting Kits➤ For Force Ventilated dc Motors as shown
on page 10
dc Tachometer-Generators➤ Life Lubricated and Sealed Ball Bearings➤ Flange or Foot Mounting➤ Permanent Magnet Fields➤ Silver Graphite Brushes➤ The dc tachometer supplies a dc voltage
that is proportional to the motor rpm, and the polarity is changed with the direction of rotation. This type is both suitable for regulation within a very wide range of armature speeds, and for 4-quadrant control. It also has the advantage of generating a very low ripple-voltage, which results in good regulation at low motor rpm.
dc Tacho-GeneratorMounting Kits➤ For TEFC dc Motors to 5.5kW as listed
on pages 4, 5 and 6➤ The kit to mount the Tachometer-
Generator consists of a fan cover, shaft extension, and tachometer adaptor bracket with miscellaneous hardware to connect these parts. Once the kit is in place all that is required to couple the Tachometer-Generator is a coupling between the motor shaft and Tachometer-Generator shaft. This coupling is supplied with the mounting kit. Use the adjacent cross reference of motor types to select the appropriate kit.
Specification Type Type Type Type
BTG1000 PTG50XP or PTG60XPS-M PTG100XP or
PFTG50XP* PFTG100XP
Voltage Gradient (V/1000rpm) 50 50 60 100RMS Ripple 8% 0.5% 0.35% 0.5%Maximum Speed (rpm) 5000 5000 4166 2500Maximum Current (mA) 400 400 50 200Armature Resistance ( at 25°C) 52 � 155 � 40 � 105 �Armature Inductance (mH) 124 127 31 86Armature Inertia (kg.cm2) 1.175 0.761 1.610 0.761Maximum Terminal Voltage (Vdc) 250 250 250 250Reversing Error 2% 1% 1% 1%Min. Load Resistance for 1% Linearity — 10 k� 4 k� 10.56 k�Shaft Diameter 5⁄16" 5⁄16" 11mm 5⁄16"Mounting Spigot Diameter 21⁄2" 21⁄2" 85mm 21⁄2"Mounting Holes & PCD 4 @ 4" PCD 4 @ 4" PCD 6 @ 100mm PCD 4 @ 4" PCDWeight approx. (kg) 3.1 2.7 4.7 3.1List Price $ (xK) 441 870 870 870
*NOTE — Type PFTG50XP and PFTG100XP are foot mounted, spigot and flange mounting dimensions not applicable.
Option Description Motor Frame Numbers
CatalogueNº
List Price$
Group
Mounting Adaptor for Baldor Tachometers BTG/PTG50 B132 to B200 TKP1836XP 444 K
Mounting Adaptor for Baldor Tachometers PTG60XPS-M B132 to B200 TKP1836XP-M 444 K
Mounting Adaptor for Encoder ENCOONV (see page 37) B132 to B225 TKP1836ENC 333 K
Mounting Adaptor for Encoder ENCOONV (see page 37) B250 to 4011 TKP400ENC 333 K
Baldor Motor Type Number
Mounting Kit Catalogue Nº
List Price$
Group
33xxD or P TK3300 153 K34xxD or P TK3400 270 K35xxD or P TK3500 285 K
36xxD TK3600 396 K36xxP TK3600PM 396 K75xxD TK7500 396 K91xxD TK9100 410 K
Example for Selection of Tacho/Encoder Mounting Kits:
Voltage Vdc 180 460
Catalogue Nº
Motor (eg) VP3326D D4540
Mounting Kit TK3300P TK1836XP
dc Spares
Page 50
8 1300 BALDOR ✆ 1300 225 367
Type 4527D
Type 3528D
Battery Powered Low Voltage dc Motors➤ 20% Compound Wound ➤ 24 Vdc ➤ Rigid Base or Flange Mount➤ TEFC➤ Designed for fixed speed/fixed direction
applications, eg. compressors, fans or pumps etc
Battery Powered Low Voltage dc Motors➤ 36 Vdc ➤ Series Wound➤ NEMA 66CZ➤ Designed for Personnel Carriers and
Electric Golf Cars etc➤ One hour duty cycle
MotorkW
Baserpm
Frame Full LoadAmps
Voltsdc
Approxkgs
CatalogueNumber
TypeNumber
List Price$(xK)
0.37 2000 56 25.0 24 20 D3516 3516D 8820.56 2000 D80-B5 32.0 24 26 VD3524D 3524D 9290.75 2000 56 42.0 24 25.4 D3528 3528D 1,0130.75 2000 D80-B5/D90-B3 42.0 24 26 VD3528D 3528D 1,063
MotorkW
Baserpm
Frame Full LoadAmps
Voltsdc
Approxkgs
CatalogueNumber
TypeNumber
List Price$(xL-1)
1.5 2800 – 53 36 27.6 S4527 4527D 9561.5 2800 – 53 36 27.6 S4527-14 4527D 9562.6 3400 – 92 36 31.3 S4534 4534D 1,0772.6 3400 – 92 36 31.3 S4534-14 4534D 1,077
Solar Powereddc Motors➤ 29 Vdc & 58 Vdc ➤ PM➤ Rigid Base ➤ TEFC ➤ IP54➤ Designed to be directly powered from
solar cells
MotorkW
Baserpm
Frame Full LoadAmps
Voltsdc
Approxkgs
CatalogueNumber
TypeNumber
List Price$(xK)
0.18 1750 56 8.6 29 12.3 SP410 3410P 4030.25 1750 56 11 29 12.5 SP413 3413P 4920.37 1750 56 7.7 58 16.0 SP420 3420P 511
TYPE 3410P
Low Voltage dc Motors
NEW
NEW
dc Spares
Page 50
dc Spares
Page 50
dc Spares
Page 50
91300 BALDOR ✆ 1300 225 367
Low Voltage dc Motors
Type 135P
KBBC Control
Battery Powered Low Voltage dc Motors➤ 12 Vdc or 24 Vdc ➤ PM➤ Rigid Base or Flange Mount ➤ TEFC or TENV, IP54➤ Designed for variable speed/variable
direction applications
Battery Powereddc Motor Control➤ For PM motors 12-24 or
12-48 Vdc jumper selectable➤ Control via single-ended or wig-wag
speed potentiometer or 0-5Vdc signal following
RatedVoltage
V
Current RatingContinuous
Amps
Current Rating for2 minutes
Amps
Current Rating Peak15 secsAmps
CatalogueNº
ListPrice
$(xKB)
12 – 24 40 60 80 KBBC-24M 40612 – 48 40 60 80 KBBC-44M 454
KBBC in IP65 Enclosure (249H x 192W x 184d mm)
12 – 24 40 60 80 KBBC-24W 84512 – 48 40 60 80 KBBC-44W 945
Type 3416P
56C F
ace Ratio Multipliers
See Page 37
MotorkW
Baserpm
Frame Style Full LoadAmps
Voltsdc
Approxkgs
CatalogueNumber
TypeNumber
List Price$(xK)
0.09 1750 D63-B14 TENV 10.1 12 5.0 VP7431-14 135P 3900.18 3000 D71-B5 TEFC 23.8 12 15.0 VP3428D-V12➀ 3420P 5140.18 3000 D71-B14 TEFC 23.8 12 15.0 VP3428-14-V12➀ 3420P 5140.18 1750 D71-B5 TEFC 22.5 12 14.5 VP3410D-V12➀ 3416P 4650.18 1750 D71-B14 TEFC 22.5 12 14.5 VP3410-14-V12➀ 3416P 4650.37 1750 56C TENV 40.0 12 15.0 CDP3430-V12 3420P 5260.37 3000 D71-B5 TEFC 41.9 12 17.0 VP3328D-V12➀ 3420P 5260.37 3000 D71-B14 TEFC 41.9 12 17.0 VP3328-14-V12 3420P 5260.37 1750 D71-B5 TEFC 37.1 12 15.5 VP3420D-V12 3420P 5260.75 1750 56C TEFC 85.6 12 20.5 CDP3445-V12 3435P 7740.75 3000 D80-B5 TEFC 77.3 12 22 VP3458D-V12➁ 3435P 9450.75 1750 D80-B5 TEFC 85.6 12 20.5 VP3455D-V12➁ 3435P 7740.75 3000 D80-B14 TEFC 77.3 12 22 VP3458-14-V12➁ 3435P 9450.7 5 1750 D80-B14 TEFC 85.6 12 20.9 VP3455-14-V12➁ 3435P 7740.09 1750 D63-B14 TENV 4.7 24 5.0 VP7441-14 135P 3900.18 1750 56C TENV 10.6 24 13.2 CDP3410-V24 3416P 4650.18 3000 D63-B14 TEFC 10.4 24 12 VP3428-14-V24 3320P 4650.18 1750 D63-B14 TEFC 9.3 24 12 VP3410-14-V24 3320P 4650.18 1750 D63-B5 TEFC 9.3 24 12 VP3410D-V24 3320P 4650.25 1750 56C TENV 13.6 24 14.5 CDP3420-V24 3416P 5120.37 1750 56C TENV 19.6 24 15.5 CDP3430-V24 3424P 5260.37 3000 D71-B14 TEFC 20.6 24 12.7 VP3328-14-V24 3327P 5260.37 3000 D71-B5 TEFC 20.6 24 12.7 VP3328D-V24 3327P 5260.37 1750 D71-B5 TEFC 19 24 16.7 VP3420D➀ 3420P 5260.37 1750 D71-B14 TEFC 19 24 16 VP3420-14➀ 3420P 5260.75 3000 D80-B14/D90-B3 TEFC 37.7 24 26 VP3458-14-V24 3438P 9450.75 3000 D80-B5/D90-B3 TEFC 37.7 24 26 VP3458D-V24 3438P 9450.75 1750 D80-B5/D90-B3 TEFC 36 24 25.3 VP3524D 3524P 7740.75 1750 D90-B14 TEFC 36 24 24.0 VP3524-14 3524P 774
All of these motors must have current limited to Twice Full Load Nameplate Amps, to prevent demagnetising.➀ Shaft centre height = 76mm. ➁ Shaft centre height = 89mm.
NEW
NEW
NEW
NEWNEW
NEW
NEW
NEW
NEW
NEW
NEW
NEW
NEW
NEW
NEW
NEW
NEW
NEW
NEW
KBBC Control in IP65 Enclosure
dc Spares
Page 50
10 1300 BALDOR ✆ 1300 225 367
dc Motors 4.7kW to 187kW
Baldordc Motors➤ Class H insulation system with 200°C materials
throughout. ➤ High dielectric stability, with low moment of inertia
armature for fast response.➤ Designed to operate below NEMA Class F
temperature rise for longer life and high overload capabilities.
➤ Armature is double dipped and baked with 100% epoxy varnish to ensure thermal conductivity, superior bond strength and chemical resistance.
➤ Field Coils are 200°C polyester polyamideimide coated magnet wire. Bolt in pole assemblies facilitate fast in-field servicing.
➤ Rated for continuous duty (S1).➤ Silver-copper alloy commutator with high
temperature mica insulation for maximum reliability even at increased temperatures.
➤ Riser connections are TIG welded for minimum resistance and maximum strength.
➤ 4 Pole ‘straight shunt wound’ design with separate field excitation on frames up to B200.
➤ 4 Pole ‘stabilised shunt wound’ design with separate field excitation on frames B225 and above.
➤ Locked bearing construction permits a minimum of armature free-play and allows mounting of motor in any position.
➤ Forced air blower cooling (IC06) complete with filter and 3 phase ac motor mounted on commutator end.
➤ B225 and B250 frame motors are suitable for direct mounting of Baldor PTG/BTG or XPY tachometer-generators without additional accessory kits. Tachometer mounting provision on all other frame sizes. Mounting kits available, see page 7.
➤ Thermostats fitted as standard for winding protection on frames B132 to B200. Thermostats optional on frames B225 and B250.
Popular Options➤ IC16, IC37 cooling, air flow sensor, air filter.➤ Thermistors.➤ Tacho-generators and mounting adaptor kits, see
page 7.➤ Digital tacho-encoder.➤ Brake (ac or dc supply).➤ Condensation drains and breathers.➤ Transparent brush inspection covers.➤ Brush wear indicator.➤ Metric B5 Flange Kits (Drive End), see price table.➤ Other options are available, please contact a
Baldor office for your requirements.
dc Motors for Thyristor Control➤ A large range of quality dc motors are available from stock.➤ Designed for Full Thyristor Control variable speed drives.➤ Class ‘H’ Insulation.➤ Stock motors are supplied as force ventilated with Blower.➤ A wide variety of options and special designs are also available.➤ Custom motors to 550kW available.
➤ IP23 enclosure standard.➤ High quality steel frame, annealed for optimum
magnetic properties. ➤ Heavy duty steel feet welded to the frame for
maximum structural integrity under adverse conditions
➤ Heavy duty cast iron endplates.➤ Precision brass brush holders provide accurate brush positioning and corrosion resistance. ➤ Stainless steel constant
force springs require no adjustment and ensure accurate pressure over the brush life.
➤ Large removable brush inspection covers allow easy
access to the commutator and brush equipment.➤ High tensile stressproof alloy
shaft designed to exceed NEMA specifications for belt loadings.
➤ Deep groove ball bearings, regreasing fittings and reliefs.
Baldor B225 Frame dc Motor
MotorkW
Nominalrpm
MotorFrame/Type
Voltage Current BlowerType
kgWeight
CatalogueNumber
List Price$(xL-2)Armature Field Armature Field
4.7 1725 B132-218 460 360 12.7 0.55 LM3 118 D4204 2500d
6.9 1690 B132-219 460 360 18.3 0.97 LM3 126 D4206 3,79211.4 1761 B132-2112 460 360 28.7 1.03 LM3 166 D4211 4,67618.5 1709 B160-2513 460 360 46.0 1.32 LM3 315 D4318 5,76729.4 1694 B180-2810 460 360 71.7 1.95 LM4 341 D4429 7,46033.6 1800 B180-2813 460 360 81.0 2.0 LM4 414 D4433 7,99040.3 1613 B200-329 460 360 97.0 1.88 LM6 417 D4540 9,13250.7 1645 B200-329 460 360 122.6 1.88 LM6 417 D4550 10,59774.6 1801 B200-3212 460 360 175 2.37 LM6 448 D4574 16,196*93.2 1870 B225-368 460 360 216 2.20 LM6 487 D4693 18,499
*112.0 1810 B225-368 460 360 260 2.30 LM6 487 D46112 21,378*149.0 1810 B225-3610 460 360 346 2.20 LM9 503 D46150 26,724*187.0 1710 B250-4011 460 360 427 3.38 LM9 935 D46187 32,528Metric B5 Flange Kit (Drive End) #PK8211-017 for Frame 132-B5 398Metric B5 Flange Kit (Drive End) #PK8251-026 for Frame **160-B5 430d
Motors marked with * are 4 Pole ‘Stabilised Shunt Wound’. These motors must be derated by 5% if stabilised field not connected.Stabilised shunt motors should be connected as SHUNT ONLY when used with reversing controllers.Other motors are 4 Pole ‘Straight Shunt Wound’. Prices include Blower. All motors are – IP23 – Force Ventilated IC06. All motors are foot mounted IM1001.NOTE: ** Flange is non-standard M = 350mmø. d – To be discontinued when existing stock is depleted. Price available for existing stock only.
dc Spares
Page 50
111300 BALDOR ✆ 1300 225 367
dc Digital Motor Controls
Drive Features➤ Three phase, full wave, four quadrant SCR
armature control. ➤ Fully controlled 6 pulse.➤ Current regulated full wave field power supply, 15
amps standard, 40 amps optional.➤ Peak overload capacity of 250-–-300%
(depending on rating).➤ Selectable operating modes: Keypad, Standard
Run, 15 Speed, Bipolar, Serial, Bipolar Hoist, 7 Speed Hoist.
➤ Automatic tuning to motor with manual override.➤ Motor shaft orient to encoder marker or external
switch closure.➤ Process Control – built-in PID controller allowing
connection of process feedback and setpoint signals for direct control of user processes including pressure, temperature, load etc.
➤ Process following ±5Vdc, 0-5Vdc, ±10Vdc, 0-–-10Vdc, 4-–-20mA, digital via keypad or optional RS232/422/485.
➤ Programmable linear or S-curve acceleration to 0-–-3600 seconds.
➤ Free run or programmable linear or S-curve deceleration (0-–-3600 seconds).
➤ 15 preset speeds (7 in Hoist Mode).➤ Field economy, field forcing.➤ Programmable field weakening.➤ Min/Max speed.➤ Analogue meter outputs.➤ Buffered encoder output.➤ 9 isolated inputs, 2 assignable analogue inputs, 4
assignable logic outputs.➤ Chassis mounting.
Motor Feedback➤ Feedback Type: Standard Armature or Incremental
Encoder coupled 1:1 to motor shaft.➤ Pulses/Rev: 60 – 65,535, programmable. 1024
PPR standard.➤ Voltage output: 2 channel in quadrature, 5Vdc,
Differential.➤ Marker pulse: Required for orientation.➤ Power output: +5Vdc, 300mA max.➤ Max frequency: 1 MHz➤ Positioning: Buffered encoder pulse train output for
position loop control.➤ Optional feedback: tachometer or resolver through
expansion board.
Protection Features➤ Adjustable current limit, motor overload and over-
current, over-temperature (motor and control), armature over-voltage, motor over-speed, field loss, encoder, tach or resolver loss, phase loss. Torque proving. Selectable manual or automatic restart at power loss. Input line, field power supply and armature fuses. Digital display for fault conditions.
Operating Conditions➤ Input voltage, 3 phase, 380 – 480 Vac ±10%.➤ Input frequency, 50 or 60Hz ±5%.➤ Max. Output Voltage = 1.08 x Input Voltage.➤ Service factor, 1.0, Continuous Duty.➤ Humidity - 90% max RH non condensing.➤ Altitude - 1000 metres max without derate.
Options (For details see page 31)➤ Expansion Boards including – Tachometer
Feedback, RS-232/422/485, Resolver Interface, etc.
➤ 40 Amp field power supply, VOO73400.
Keypad/Display➤ Baldor Harmonised Keypad/Display. Removable
remote mountable IP65 (NEMA 4X) operator keypad/display panel.
➤ Remote mounting up to 30 metres from control.
Series ‘20H’ Line Regenerative dc Digital Controls➤ Precision dc Motor Control for Constant Torque, Variable Speed ➤ Models for 3.7kW to 450kW motor capacity➤ Harmonised componentry and operation routines with ac Flux Vector/Inverter Drives
Catalogue Number
Armature Current Field Current
Input Voltage Range 3ph/50Hz
ChassisSize
ApproxWeight
ListPriceContinuous Peak
amps amps amps Vac Code kg $(xE1)
BC20H410-CL 20 60 15 340 – 460 A 19 4,718BC20H420-CL 40 120 15 340 – 460 A 19 5,129BC20H430-CL 60 150 15 340 – 460 A 19 5,295BC20H440-CL 75 190 15 340 – 460 B 23 5,529BC20H450-CL 100 250 15 340 – 460 B 23 6,131BC20H475-CL 140 420 15 340 – 460 C* 34 8,485BC20H4100-CL 180 480 15 340 – 460 C* 34 9,155BC20H4125-CL 210 530 15 340 – 460 C** 34 10,210BC20H4150-CL 270 680 15 340 – 460 C** 34 11,166BC20H4200-CL 350 875 15 340 – 460 D 114 13,425BC20H4250-CL 420 1050 15 340 – 460 D 114 16,814BC20H4300-CL 500 1250 15 340 – 460 D 114 18,419
15 amp Field Current standard. Optional Field Current of 40 amps available.
‘20H’ ENCLOSURE DIMENSIONSIP23 Enclosures except ‘G NEMA 1’
Cabinet
size code
20H Cabinet Dimensions Shipping
weight
Aprx.kg
Outside Mounting
Height Width Depth Height WidthA 523 280 251 457 260 18B 680 280 283 634 260 32C* 692 300 270 626 260 38C** 857 300 270 626 260 44D 1113 429 316 997 350 124
G Nema1 2312 813 610 Floor Mount 273
12 1300 BALDOR ✆ 1300 225 367
dc Gearmotors
Type GPP3374
Type GPP233121
Type 2424P-PSL-0
Parallel Shaft dc Gearmotors➤ Permanent Magnet Motor➤ Continuous Duty ➤ TENV➤ Hardened Steel Helical Gears➤ Diecast Alloy Housing & Flange Mount
Face➤ Suit Horizontal or Vertical Mounting➤ Reversible➤ Synthetic Oil Filled Gearbox
(MOBIL SHC634)
MotorkW
Baserpm
Max Cont Trq Nm
Ratio:1
ArmVdc.
ArmFLAmps
Approxkgs
CatalogueNumber
TypeNumber
ListPrice
Group
0.009 5.7 10.6 300 180 0.13 3.6 GPP233124 2314P-PSSH-0 438 K0.015 5.7 20.6 300 180 0.17 3.6 GPP233142 2314P-PSM-0 550 K0.015 9.5 10.6 180 180 0.16 3.6 GPP233125 2314P-PSSH-0 438 K0.03 9.5 24.5 180 180 0.3 3.6 GPP233143 2314P-PSM-0 550 K0.03 19 13.3 90 180 0.29 3.6 GPP233120 2314P-PSSH-0 438 K0.03 57.5 5.65 30 180 0.34 3.6 GPP233121 2318P-PSSH-0 438 K0.05 42 8.62 40 180 0.43 3.6 GPP233126 2318P-PSSH-0 438 K
0.062 19 25.6 90 180 0.44 6.8 GPP12568 125-PSM-0 595 K0.062 43 12.5 40 180 0.5 5.0 GPP12525 2420P-PSSH-0 458 K0.062 250 2.2 10 180 0.5 5.0 GPP12521 2416P-PSSH-0 458 K0.09 8.3 37.0 300 180 0.38 7.7 GPP7479 2416P-PSL-0 629 K0.09 42 19.7 60 180 0.65 5.0 GPP12567 2416P-PSM-0 558 K0.09 83 9.8 30 180 0.65 5.0 GPP12564 2416P-PSM-0 558 K0.09 114 6.48 15 180 0.65 5.0 GPP12527 2420P-PSSH-0 462 K0.09 175 4.4 10 180 0.65 5.0 GPP12528 2420P-PSSH-0 462 K0.09 250 3.28 10 180 0.65 5.0 GPP12561 2416P-PSM-0 532 K0.09 500 1.69 5 180 0.65 5.0 GPP12560 2416P-PSM-0 532 K0.18 14 38.4 180 180 0.5 7.7 GPP7478 2424P-PSL-0 629 K0.18 21 35.6 120 180 0.62 7.7 GPP7477 2424P-PSL-0 629 K0.18 42 31.6 60 180 1.1 7.7 GPP7476 2424P-PSL-0 629 K0.18 62 24.9 40 180 1.2 7.7 GPP7475 2424P-PSL-0 629 K0.18 83 17.5 30 180 1.1 7.7 GPP7474 2424P-PSL-0 629 K0.18 125 11.3 20 180 1.2 7.7 GPP7473 2424P-PSL-0 629 K0.18 165 7.9 15 180 1.2 7.7 GPP7472 2424P-PSL-0 629 K0.18 250 5.08 10 180 1.1 7.7 GPP7471 2424P-PSL-0 629 K0.18 500 2.82 5 180 1.2 7.7 GPP7470 2424P-PSL-0 629 K0.25 58 36.0 30 180 1.5 16.0 GPP3370 327-PSLH-0 750 K0.25 115 18.5 15 180 1.5 16.0 GPP3374 327-PSLH-0 750 K0.25 345 6.2 5 180 1.6 16.0 GPP3378 327-PSLH-0 750 K0.37 83 38.1 30 180 2.5 16 GPP3380 327-PSLH-0 766 K0.37 167 19.3 15 180 2.5 16 GPP3384 327-PSLH-0 766 K0.37 500 6.4 5 180 2.5 16 GPP3388 327-PSLH-0 766 K
“B” Steel Foot Mount. Bolts to bottom of PSM gearbox B92 32 K“L” Type Mounting Bracket to mount type PSSH 0.45 LB73 39 K“L” Type Mounting Bracket to mount type PSL & PSLH 0.45 LB74 39 KL brackets securely mount to gear face in 90° locations for floor, wall or ceiling mount.
37
SEE PAGE
dc Motor Controls
Page 14 to 18
dc Spares
Page 50
131300 BALDOR ✆ 1300 225 367
Type GP233025
dc Gearmotors
Type 2420P-JK-0
Right Angle Drive dc Gearmotors➤ Permanent Magnet Motor➤ Continuous Duty ➤ TENV ➤ IP54➤ Hardened Steel Worm➤ Precision Hobbed Bronze Gear➤ Internal Expansion Bladder on Type BA,
CB and JK gearboxes to accommodate pressure build-up
➤ Suitable for Horizontal or Vertical Mounting
➤ Reversible➤ Baked Enamel Finish➤ Synthetic Oil Filled Gearbox
(MOBIL SHC634)
MotorkW
Baserpm
Max Cont Trq Nm
Ratio:1
ArmVdc.
ArmFLAmps
Approxkgs
CatalogueNumber
TypeNumber
ListPrice
Group
0.015 1.9 8.5 1100 180 0.11 3.2 GP233020 2314P-DA-0 383 K0.015 4.1 8.5 660 180 0.2 3.2 GP233029 2314P-DA-0 383 K0.015 8.5 7.4 310.5 180 0.26 3.2 GP233028 2314P-DA-0 383 K0.03 19 7.2 130 180 0.31 3.2 GP233027 2314P-DA-0 383 K
0.038 60 3.7 30 180 0.42 3.2 GP233023 2318P-BA-0 383 K0.05 40 6.4 45 180 0.42 3.6 GP233026 2318P-CB-0 383 K0.05 53 5.4 33 180 0.4 3.6 GP233025 2318P-CB-0 383 K0.05 76 3.7 22.5 180 0.45 3.6 GP233024 2318P-CB-0 383 K0.05 86 3.4 20 180 0.42 3.2 GP233022 2318P-BA-0 383 K0.05 173 2.0 10 180 0.42 3.2 GP233021 2318P-BA-0 383 K0.09 8 17 450 180 0.55 6.0 GP7432 125P-EB-0 579 K0.09 12 17 150 180 0.60 6.0 GP7431 125P-EB-0 579 K0.09 23 14.1 75 180 0.60 6.8 GP7430 2424P-EB-0 579 K0.09 30 8.5 58 180 0.45 6.3 GP7424 2420P-JK-0 551 K0.09 38 11.3 45 180 0.60 6.3 GP7423 2420P-JK-0 551 K0.09 52 8.5 33 180 0.60 6.3 GP7422 2420P-JK-0 551 K0.09 78.2 6.8 22.5 180 0.60 6.3 GP7421 2420P-JK-0 551 K0.09 173 3.61 11 180 0.65 6.3 GP7420 2424P-JK-0 551 K0.09 173 3.61 11 12 10.5 6.0 GP7420-V12 2424P-JK-0 655 K0.15 50 13.6 45 180 1.1 6.3 GP7428 2428P-JK-0 551 K0.18 20 19.8 180 180 1.0 6.8 GP7429 2424P-EB-0 604 K0.18 68 15.3 45 180 1.3 6.4 GP7425 2428P-JK-0 551 K0.18 76 11.3 45 180 1.3 6.3 GP7427 2428P-JK-0 551 K0.18 104 8.5 33 180 1.3 6.3 GP7426 2428P-JK-0 551 K0.18 314 3.61 11 180 1.3 6.3 GP7433 2428P-JK-0 551 K
NEW
37
SEE PAGE
dc Motor Controls
Page 14 to 18
dc Spares
Page 50
14 1300 BALDOR ✆ 1300 225 367
Variable Speed dc Controls
PHOTO DESCRIPTION CATALOGUENUMBER
INPUT VOLTAGE 50/60Hz
Vac
OUTPUTVOLTAGE
Vdc
MAXIMUM RATINGSWITHOUT AUXILIARY HEATSINK
MAXIMUM RATINGS
WITH AUXILIARY HEATSINK
REQUIRES PLUG-IN
RESISTOR
LISTPRICE
$GROUP
kW dc amps kW dc amps
KBIC™. Controls PM, Shunt and ac/dc motors over a range of .0075 - 1.5kW. All models can be used on a wide range of motor ratings by inserting the proper Plug-in Horsepower Resistor™. Speed range is 50:1 with load regulation of 1%. Features include Auto Inhibit™, Voltage Following, MOV transient protection, 5K speed pot and trimpot adjustments for MIN, MAX, ACCEL, IR and CL. Options include Auxiliary Heatsink, ac Line and Armature Fuse Kit and Barrier Terminal Kit. Dimensions: 92 x 109 x 32mm.
KBIC-120 120 0-100 0.37 6.0 0.75 12.0 YES 132 KB
KBIC-240 240 0-200 0.75 6.0 1.5 12.0 YES 143 KB
9884 Barrier Terminal Board – 26 KX
9443 Barrier Terminal Board with Signal Isolator – 153 KX
9995 DIN Rail mount kit – 28 KX
KBMM™. Full-wave, variable speed, dc Motor Control, contains a unique, super fast Direct-Fed™ current limit circuit that helps to protect the SCR power bridge against direct shorts at the motor. The KBMM™ is also fitted with the Plug-in Horsepower Resistor and has features such as selectable armature or tacho feedback and adjustment trimpots for min. speed, max. speed, IR comp, CL and linear accel and decel. The KBMM circuitry also includes Auto Inhibit, which eliminates surging during rapid ac line switching; pulse transformer triggering which provides cogless operation at low speed under no load conditions; and superior noise rejection which eliminates false starts and blown SCR’s. Size 109 x 92 x 32mm.
KBMM-125 120 0-100 0.56 8.0 1.1 16.0 YES 173 KB
KBMM-225 240 0-200 1.1 8.0 2.2 16.0 YES 180 KB
KBMM-225D120 0-100 0.56 8.0 1.1 16.0
YES 192 KB240 0-200 1.1 8.0 2.2 16.0
9444120/240
Jumper select
Barrier Terminal Board with Signal Isolator – 153 KX
9952 Run/Brake Module – 81 KX
9897 Barrier Terminal Board – 26 KX
9995 DIN Rail mount kit – 28 KX
KBCC-255™. Designed to control 3.75kW dc Shunt and PM motors. It is built on a rugged aluminium chassis and uses the KBMM™ modular control, which contains Direct-Fed™ CL circuitry, for excellent performance and reliability. The unit contains a 42 Amp power bridge, armature and control fusing, which enhances reliability. An exclusive feature, found only in KB drives, is Auto Inhibit™, which provides a smooth, safe start during rapid switching of the ac line. Standard features include: armature or tach feedback and trimpots for Min, Max, IR Comp, CL and Linear Accel and Decel. A 5K speed potentiometer is included. Dimensions: 254 x 160 x 101mm. Patented.
KBCC-255 240 0-200 3.75 26.0 – – NO 538 KB
KBCC-R™. Chassis mount control designed to provide anti-plug “instant” reversing, solid state dynamic braking and rapid cycling. It combines all of the features of the KBCC control with the features of the KB APRM™.The APRM™ eliminates contact arcing by allowing armature switching to take place only when current levels are near zero. Specific functions that can be performed by the KBCC-R are Run-Brake, Forward-Brake-Reverse, Run-Stop and Forward-Brake-Reverse. Run-Stop and Forward Reverse (instant reverse). Dimensions: 229 x 159 x 114mm.
KBCC-125R 120 0-100 1.1 16.0 – – YES 458 KB
KBCC-225R 240 0-200 2.2 16.0 – – YES 500 KB
KBPB™. A compact version of the KBCC-R control. The APRM™ is mounted directly to the rear of the KBIC™ speed control. A built-in barrier terminal block and its small size make the control ideal for installation where space is at a premium. The KBPB™ is equipped with a built-in 10 ohm, 50W dynamic brake resistor, ACCEL/DECEL trimpots and an ac line fuse.This control provides functions identical to that of the KBCC™. A 5K ohm remote potentiometer is included. Dimensions: 108 x 111 x 125mm.
KBPB-125 120 0-100 0.56 8.0 1.1 16.0 YES 380 KB
KBPB-225 240 0-200 1.1 8.0 2.2 16.0 YES 425 KB
9995 DIN Rail Mount (converts to DIN rail mounting) – 28 KX
KBMG™. Ultracompact, full-wave regenerative drive for dc PM or Shunt motors. 4-quadrant operation. Maintains constant speed with overhauling loads and provides rapid reversing and controlled braking. Can replace servos in many applications. Features jumper selection for – Speed or Torque control; Vac input; Vdc output; tach-gen feedback; amps dc output; analog input Vdc; “regenerate to stop” or “coast to stop”. Trimpots for – Dead band; Response; IR; CL fwd and rev; Speed max; Fwd Accel and Reverse Accel. LED’s – Power On; Overload. Enable function for remote contactor start and stop. Auto Inhibit® provides safe, smooth starting even during rapid cycling of the ac line. A 5K remote potentiometer supplied.Dimensions: 92 x 109 x 45mm.
KBMG-21D120 0-±90 0.05 1.0 – –
NO 253 KB240 0-±180 0.1 1.0 – –
KBMG-212D120 0-±90 0.5 8.0 0.75 11.0
NO 274 KB240 0-±180 1.0 8.0 1.5 11.0
8832 SIMG Bipolar Signal Isolator (for non-isolated signal source) – 151 KX
8833 Multi-speed boards – 84 KX
8834 4 Quadrant Accel/Decel board – 135 KX
9995 DIN Rail Mount (converts to DIN rail mounting) – 28 KX
151300 BALDOR ✆ 1300 225 367
Variable Speed dc Controls
PHOTO DESCRIPTION CATALOGUENUMBER
INPUT VOLTAGE 50/60Hz
Vac
OUTPUTVOLTAGE
Vdc
MAXIMUM RATINGSWITHOUT AUXILIARY HEATSINK
MAXIMUM RATINGS
WITH AUXILIARY HEATSINK
REQUIRES PLUG-IN
RESISTOR
LISTPRICE
$GROUP
kW dc amps kW dc amps
KBRG™ Full-wave Regenerative Control. Capable of operating a dc motor (PM or Shunt) in a bi-directional mode. It provides 4-quadrant operation which allows forward and reverse torque in both speed directions. Standard features include: built-in heatsink and motor kilowatt selection, armature and tach feedback (212D volt following), trimpots for Fwd CL, Rev CL, IR Comp, Response, Max Spd, Offset, Deadband, Fwd Accel, Rev Accel and Timed Current Limit. LED indicators for: Power On, Current Limit, Fwd Enable and Rev Enable. 5K speed pot included. 225D/240D = 196 x 254 x 85mm. 212D = 213 x 121 x 43.2. Options: Sl-4X bi-polar signal isolator: 8803 4-quadrant Accel/Decel Board provides independent adjustment in both directions: 8804 PID increases dynamic response.
KBRG-212D120/240 0-±90 0.5 7.5
NO 353 KB240 0-±180 1.0 7.5
KBRG-225D120 0-100 1.1 16.0
NO 645 KB240 0-200 2.2 16.0
KBRG-240D120 0-100 0.75 11.0
NO 543 KB240 0-200 1.5 11.0
KBRG-255 240 0-200 3.7 26.0 NO 791 KB
KBSI-4X Isolator – 180 KX
SC8820 Mounting Bracket for KBSI-4X for use with KBRG-212D – N/C –
8803 4 Quadrant – 136 KX
8804PID Control – 230 KX
KBWD-15 Pulse Width Modulated (PWM) dc motor speed control. Significantly lowers audible motor noise and provide longer brush life.Less motor heating allows a smaller, less costly motor to be used for most applications. Another advantage of PWM is higher output voltage which provides increased output speed. Includes armature and tachometer feedback, I x t overload protection and diagnostic LED’s for “Power On” and “Overload (CL)” indication. RFI filtering and barrier terminals standard.
KBWD-15 120 0-130 0.56 5.0 – – YES 189 KB
KBWT Pulse Width Modulated (PWM) dc motor speed control. Designed for high current applications. Form factor <1.05. Active bridge circuitry limits inrush current during ac line startup and prevents control runaway in the event of shorted output transistors. Includes (I x t) overload protection and instantaneous short circuit protection.KBWT-26 = 127 x 178 x 50.8mm.KBWT-210 = 172 x 178 x 50.8mm.
KBWT-26 240 0-260 1.1 6.0 – – NO 243 KB
KBWT-210 240 0-260 1.5 8.5 – – NO 330 KB
KBWS-25D Pulse Width Modulated (PWM) Whisper-Drive™ with built-in input signal isolation. Designed for PWM and SCR rated Permanent Magnet motors. Switching frequency greater than 16kHz for high motor efficiency and quiet operation. High max. output voltage for increased motor speed. Auto input voltage sensing. Accepts Plug-in Resistor for auto IR compensation and current limit. LEDs for power on and current limit. Protection includes motor short circuit, undervoltage, MOV input transient, ac-line inrush current limit. Trimpots for Max. and Min. Speed, Accel and Decel, Current Limit, IR Comp. Dimensions: 110 x 92 x 81mm.Accessories: 8611 Product Safety Module protects operator from runaway and uncontrolled acceleration.
SCR Motor
120 0-90 0.37 5.0 – –
YES 219 KB
208/230 0-180 0.75 5.0 – –
208/230 0-90 0.37 5.0 – –
KBWS-25D
PWM Motor
120 0-90 0.5 5.0 – –
208/230 0-180 1.0 5.0 – –
208/230 0-90 0.5 5.0 – –
8611 Product Safety Module – 23 KX
16 1300 BALDOR ✆ 1300 225 367
Variable Speed dc Controls
PHOTO DESCRIPTION CATALOGUENUMBER
INPUT VOLTAGE 50/60Hz
Vac
OUTPUTVOLTAGE
Vdc
MAXIMUM RATINGSWITHOUT AUXILIARY HEATSINK
MAXIMUM RATINGS
WITH AUXILIARY HEATSINK
REQUIRES PLUG-IN
RESISTOR
LISTPRICE
$GROUP
kW dc amps kW dc amps
KBWM-240 Compact Packaged SCR Drive in NEMA 1 Enclosure. Specifically designed for SCR rated permanent magnet dc motors up to 0.56kw. Suitable for 240Vac single phase input. It utilises the KBMM™ speed control for its electronics, preventing motor demagnetisation. Rugged all-metal NEMA 1 enclosure. Built-in speed control potentiometer/dial and ON/OFF ac line switch with indicator lamp. Includes ac line fuse and has facilities to accept armature fuse. Accepts KB Plug-in Horsepower Resistor™ for motor size selection, eliminating the need to calibrate IR compensation and CL. Dimensions: 59 x 94 x 134mm.
KBWM-240 240
0-90or
180Jumper select
0.56 3.5 – – YES 182 KB
KBMD-240D Packaged SCR Drive in a NEMA-1 Enclosure. Also called Multi-Drive™ It utilises the KBMM™ speed control for its electronics. The Multi-Drive™ is rugged and compact in size. It handles both 120 and 240V ac line inputs by setting the built-in Dual Voltage Switch. In addition, the single model can be used on a wide range of motor ratings by inserting the appropriate Plug-in Horsepower Resistor™. The Auxiliary Heatsink (optional) doubles the rating of the basic unit. An optional Forward-Brake-Reverse Switch Kit is also available. Dimensions: 129 x 136 x 181mm. Requires Armature and Line Fuses.
KBMD-240D
120 0-100 0.56 8.0 0.76 11.0
YES 248 KB
240 0-200 1.1 8.0 1.5 11.0
9860 Forward/brake/reverse switch – 124 KX
9861 Auxiliary Heat Sink – 70 KX
KBPC Multi-featured packaged SCR drive. Wash-Down duty (IP65/NEMA-4) diecast enclosure. Has acrylic coating and shaft seals for wash-down and wet area applications. Includes short circuit and transient protection, electronic overload protection, armature fusing, LED indicators for Power On, Stop and Current Limit. Trimpot adjustments for, Min/Max speeds, Accel/Decel, Current Limit, IR Comp, and Timed Current LimitAccessories: 9339 Forward/Brake/Reverse Switch.9340 Run/Stop/Jog Switch. 9341 On/Off ac Line Switch. 9377 Auto/Manual Switch Kit. 9378 Electronic Fwd/Brake/Rev module can be mounted inside and internally connected.
KBPC-240D120 0-100 0.75 10.2 – –
NO 335 KB240 0-200 1.5 10.2 – –
KBPC-225 240 0-200 2.2 15.0 – – NO 352 KB
9339 Forward/Brake/Reverse Switch (for KBPC-240D only) – 124 KX
9340 Run/Stop/Jog Switch – 19 KX
9341 On/Off ac Line Switch (for KBPC-240D only) – 19 KX
9377 Auto/Manual Switch Kit – 19 KX
9378A Electronic Fwd/Brake/Rev Module (for KBPC-240D only) – 183 KX
9510 Spare pot kit for KBPC – 26 KX
KBRC-240D Full-Wave 4-Quadrant Regenerative Drive. Wash-Down duty (IP65/NEMA-4) diecast enclosure. For speed or torque control of PM or Shunt wound motors in both directions. Maintains constant speed with overhauling loads and provides instant reversing and controlled braking. Can replace servo drives in many applications. Includes diagnostic LEDs (for Power On, Stop and Overload), a Start/Stop Switch and a Main Speed Potentiometer. Other features include Barrier Terminal Blocks, adjustable trimpots, selectable jumpers and LEDs for easy setup.Accessories: 9485 Forward/Stop/Reverse Switch and regenerative braking. 9486 Power On/Off Switch: Disconnects ac line. 9487 Auto/Manual Switch: Selects signal from either the SIRC or main speed pot. 8842 Signal Isolator (SIRC): Isolates controller from a non-isolated signal source
KBRC-240D
115 0-±90 0.75 11 – –
NO 478 KB208/230 0-±180 1.5 11 – –
208/230 0-±90 0.75 11 – –
9485 Forward/Stop/Reverse Switch and regenerative braking – 19 KX
9486 Power On/Off Switch: Disconnects ac line – 19 KX
9487 Auto/Manual Switch – 19 KX
8842 Signal Isolator (SIRC) – 189 KX
KBPW-240D PWM dc Motor Speed Control. Wash-Down duty (IP65/NEMA-4) diecast enclosure. Speed control for Permanent Magnet and Shunt Wound motors to 7.5amps. Switching frequency greater than 16kHz for high motor efficiency and quiet operation. High max. output voltage for increased motor speed. Auto input voltage sensing. Start/Stop switch and front LEDs for Power/Stop/Overload. Protection includes motor and power transistor short circuit, ac-line inrush current limit. Trimpots for Max. and Min. Speed, Accel and Decel, Timed Current Limit, IR Comp, Jog. Jumper selectable Tacho feedback voltage, motor voltage, current range, timed and non-timed current limits, NC/NO run relay contacts. Field Voltage = 100Vdc for 115Vac input. Field Voltage = 200Vdc for 230Vac input. Accessories: 9339 Provides reversing and dynamic braking. 9340 Selects speed from main pot or JOG trimpot. 9341 Disconnects ac line. 9377 Selects signal from either the KBSI or main speed pot. 9378A Provides electronic braking and instant reversing. KBSI-240D Isolates controller from signal source.
SCR Motor 115 0-130 0.5 7.5 – –
NO 510 KB
PWM Motor 115 0-120 0.75 7.5 – –
KBPW-240D
SCR Motor 230 0-220 1.0 7.5 – –
PWM Motor 230 0-220 1.5 7.5 – –
9339 Forward/Brake/Reverse Switch (with dynamic braking) – 124 KX
9340 Run/Stop/Jog Switch – 19 KX
9341 On/Off ac Line Switch – 19 KX
9377 Auto/Manual Switch Kit – 19 KX
9378A Electronic Fwd/Brake/Rev Module – 183 KX
KBSI-240D Signal isolator – 183 KX
171300 BALDOR ✆ 1300 225 367
Speed Control Related Products
PHOTO DESCRIPTION CATALOGUE NUMBER
MODELS WHERE USEDList Price
$ GroupKBMM KBIC KBCC KBPB KBMD KBPC KBRG
KBMG KBWD
KBSI-240D Signal Isolator. 120/240Vac input.Provides an isolated interface between non-isolated signals and KB motor speed controls. Signal sources include process controllers, transducers, micro-processors and programmable controllers. The maximum output voltage of the KBSI is 10 volts, which is a linear function of the input. The unit is versatile since a single model accepts a wide range of voltage (0-25, 0-120 and 0-550Vdc) and current (1-5, 4-20 and 10-50ma) signals. Multi-turn trimpots are provided for “MIN”, “MAX”, and “RATIO”. 120/240Vac input. 50/60Hz. Dimensions: 36 x 86 x 135mm.
KBSI-240D ✓ ✓ ✓ ✓ ✓ ✓ ✓ 183 KX
KBET-240D Frequency to Analogue Tachometer and Follower. Designed to accept a pulse input, which is produced by Hall or inductive pickups, and to create two independent isolated output signals. The Tachometer Output is normally used for tachometer feedback. The Follower Output is used to drive a second control in a master/slave system. Two LED’s, “Power On” indicates the unit has ac power, and “Pulse” is used to verify the presence of an encoder input. Jumper selections for ac input voltage (120/240 Vac) and the sensor type. Multiturn trimpots are provided for Tachometer Output and Follower Outputs setting. Dimensions: 68 x 122 x 28mm.
KBET-240D ✓ ✓ ✓ ✓ ✓ 199 KX
KBAP-240D Current Sensing Relay/Overload. 120/240Vac input. An electronic dc Current Sensing Relay and Overload Protector for use with motors from .09 – 2.2kW. It can accommodate larger motors with the use of an external shunt. The KBAP contains five preset current trip points which can be further adjusted with a trimpot. The unit also contains adjustments for time delay and hysteresis. An LED indicates when the preset current trip point has been reached. External contacts are provided which can be used to sound an alarm or shut the system down if an overload occurs. Dimensions are 69 x122 x 28mm.
KBAP-240D ✓ ✓ ✓ ✓ 121 KX
KBEP-240D Electronic Potentiometer. Designed to provide digital type motor speed con trol. It replaces a standard potentiometer with a set of momentary pushbuttons or membrane switches (customer-supplied) – one to increase speed (“up”) and the other to decrease speed (“down”). Separate meter output that can be used to operate a digital or analog meter. The meter scale can be calibrated to desired units with the built-in meter scale trimpot. The Min and Max trimpots are used to set the range of motor output speed. Can be used as a master potentiometer. Connects to F+ and F– on control for power input. Dimensions: 68 x 122 x 28mm.
KBEP-240D ✓ ✓ ✓ ✓ ✓ ✓ ✓ 69 KX
Auxiliary Heatsink. Used to double the rating of several KB control models. It is constructed of black anodised aluminium and has keyhole slots to facilitate mounting. When used with the KBIC™ models, the Auxiliary Heatsink has provision for mounting the Barrier Terminal Accessory Kit. Dimensions: 178H x 159W x 35Dmm.
9861 ✓ ✓ ✓ ✓ 70 KX
KBIC™ and KBMM™ Barrier Terminal Boards.Easily convert a standard control with quick-connect terminals to barrier terminals. Provision is made for ac line and armature fusing. The Barrier Terminal Board installs directly over the control by mating the Q-D terminals. A separate .110" jumper wire can be used to connect the I1 inhibit terminal or, on the KBMM™, to the T or B terminals which are used for tack feedback. (Refer to KBMM Instruction Manual.) Fuses supplied separately. 9443 is a Barrier Terminal Board for the KBIC™ with SI-5 built-in 0–10V signal isolator with min. and max. trimpot adjustment. 9444 with SI-6 provides the same features for the KBMM™.
9884 ✓ 26 KX
9897 ✓ 26 KX
9443(KBSI-5) ✓ 153 KX
9444(KBSI-6) ✓ 153 KX
Barrier Terminal Accessory Kit. Converts a KBIC™ from 1/4" Q-D to barrier terminals. It installs easily with its preformed wiring harness and is compatible with the auxiliary heat sink. The Kit also contains built-in ac line and armature fuse blocks with fuses. The 9883 Kit is designed to adapt to the KBMM controller and does not include the fuse blocks as these are built onto the KBMM board.
9863 ✓ 50 KX
9883 ✓ 41 KX
Potentiometer Kit.Main speed control potentiometer. Potentiometer Kit consists of a rugged wire wound linear ohm potentiometer with mounting hardware and front panel insulator.
9831 ✓ ✓ ✓ ✓ ✓ ✓ 13 KX
9111 ✓ ✓ ✓ ✓ ✓ ✓ 11 KX
Unidirectional Only
Overload ProtectionBuilt-in
18 1300 BALDOR ✆ 1300 225 367
Speed Control Related Products
PHOTO DESCRIPTION CATALOGUENUMBER
MODELS WHERE USED LIST PRICE Group
KBMM KBIC KBCC KBPD KBMD KBPC KBRG KBWD
Knob/Dial Kit.Knob is black with aluminium insert and pointer. Contains double setscrews for secure attachment to all KB potentiometers with 1/4” (6mm) shafts. Dial Plate is black anodised .040” aluminium with 3/8” (9.5mm) mounting hole. Dimensions: Knob: 29D x 17.5Hmm Dial Plate: 57W x 52mmH.
9832 ✓ ✓ ✓ ✓ ✓ ✓ 8 KX
Forward-Brake-Reverse Switch Kit.This completely wired assembly consists of a heavy-duty reversing switch and a 10 ohm-50W braking resistor. The switch contains an additional set of contacts used for Inhibit™ and dynamic brake.
9860 ✓ 124 KX
SI-3 Signal IsolatorThe SI-3 converts contact reversing on KBPB and KBCC-R models to 5-10 Vdc switching.
9447 ✓ ✓ 40 KX
Armature Choke (18amps)For SCR and PWM dc drives. Wired in series with motor armature to provide EMI protection. Also effective in series with ac input.
9993 ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ 25 KX
KBRF-200A EMC/EMI Filter 9945C For use with ‘CE’ rated ac or dc Controls. 60 KX
KBRF-300 EMC/EMI Filter 9484 For use with ac Variable Frequency Controls. 133 KX
KBRF-250 EMC/EMI Filter Class A Industrial 117 KX
Used to suppress electronic interference caused by motor speed controls. Most speed controls utilise SCR's or IGBT’s that switch rapidly causing high frequency interference pulses.KBRF-200A is an EMC/EMI filter designed for use with ‘CE’ rated KB motor speed controls. When installed in accordance with manufacturers instructions the motor speed control will comply with ‘CE’ 89/336/EEC relating to EMC. Rating 24 amps ac max, 120/240Vac 50/60Hz. Frequency range 9kHz – 30MHz. Earth Leakage 2.0mA @ 250Vac/50Hz.KBRF-300 is an EMC/EMI filter designed for ac variable frequency drives. Complies with C✓.
Plug-in Horsepower Resistor®
required on allSpeed Controls
exceptKBCC-255, KBRG, KBMG
and KBPC
ARMATURE90 - 130 Vdc MOTOR kW
ARMATURE 180 Vdc MOTOR kW RESISTOR VALUE OHMS CATALOGUE
NUMBERINDIVIDUAL LIST PRICE
$eachBox Lots (50/box) LIST PRICE $each Group
.0075 — .015 .015 — .03 1.0 9833 2.70 2.00 KX
.015 — .025 .03 — .05 .51 9834 2.70 2.00 KX
.025 — .037 .05 — .075 .35 9835 2.70 2.00 KX
.037 — .063 .075 — .13 .25 9836 2.70 2.00 KX
.063 — .094 .13 — .19 .18 9837 2.70 2.00 KX
.094 — .15 .19 — .25 .10 9838 2.70 2.00 KX
.19 .37 .05 9839 2.70 2.00 KX
.25 .56 .035 9840 2.70 2.00 KX
.37 .75 .025 9841 2.70 2.00 KX
.56 1.1 .015 9842 2.70 2.00 KX
.75 1.5 .01 9843 2.70 2.00 KX
1.1 2.2 .006 9850 2.70 2.00 KX
FuseA fuse is required on all KB Speed
Controllers except KBCC-255
ARMATURE 90 Vdc MOTOR kW
ARMATURE 180 Vdc MOTOR kW
APPROXIMATE MOTOR dc AMPS
FUSE RATING ac AMPS
INDIVIDUAL CATALOGUE NUMBER
INDIVIDUAL LIST PRICE $each
Box Lots (100/box) LIST PRICE $each Group
.025 .05 .33 .5 9736 1.40 0.85 KX
.037 .075 .5 .75 9737 1.40 0.85 KX
.05 .094 .65 1.0 9738 1.40 0.85 KX
.063 .125 .85 1.25 9739 1.40 0.85 KX
.094 .19 1.3 2.0 9740 1.40 0.85 KX
.125 .25 1.7 2.5 9741 1.40 0.85 KX
.19 .37 2.5 4.0 9742 1.90 1.14 KX
.25 .56 3.3 5.0 9743 1.90 1.14 KX
.37 .75 5.0 8.0 9744 2.25 1.35 KX
.56 1.1 7.5 12.0 9745 3.50 2.15 KX
.75 1.5 10.0 15.0 9746 3.50 2.15 KX
1.1 2.2 15.0 25.0 9747 3.50 2.15 KX
700 Piece Master Fuse Kit. 9870 984 KX
An assortment of 12 different fuse ratings which have been selected to offer protection for dc motors and controls from .025kW to 2.2kW. The Kit contains 50 each of .5, .75, 1, 1.25, 2, 2.5, 4, 5, 8, and 15 amp fuses plus 100 each of 12 and 25 amp fuses, totalling 700 pieces. The fuses are presented in a convenient, high impact plastic parts box with separate compartments. All fuses are available in 100 quantity reorder bulk packs as shown above.
191300 BALDOR ✆ 1300 225 367
Programmable Relays
Standard Features➤ 8 Programming Keys➤ Simplified Ladder Logic and Function
Block Programming with Real-Time Editing of Presets
➤15 Six-Digit Counters (8 Types)➤ Differential One-Shot Functions➤ 15 Internal Memory Relays➤ 15 HMI Display Text Messages and
Real-Time Data Editing➤ PWM Output on Transistor Models➤ Real Time Simulation for Program
Debugging and Testing: - Digital Input Activation - Display of Output States - Dynamic Display of Active Elements - Analog Input Voltage Simulation➤ DIN Rail and Slide-Out Tab Panel
Mounting Systems➤ Multi-Language Text Display➤ Software Password Protection
Popular Applications➤ Machine Automation ➤ Process Control➤ HVAC Systems➤ Agricultural Equipment➤ Instrumentation Logic Interfacing
KBMS2 Parameter SpecificationProgram Memory (Ladder Rungs/Blocks) 200/99
Input Power Voltage Range – dc Models (Volts dc) 21.6 – 26.4
Input Power Voltage Range – ac Models (Volts ac – 50/60 Hz) 83 – 265
Output Relay Contact Rating (Amps @ 250 Volts ac/24Volts dc Inductive) 8/3/
Input Signal Voltage Threshold – dc Models: "On", "Off" (Volts dc) >15/<5
Input Signal Voltage Threshold – ac Models: "On"/"Off" (Volts ac) >79/<40
Input Signal Response Time – dc Models: "On-to-Off"/"Off-to-On" (mS) 3/5
Input Signal Response Time – ac Models : "On-to-Off"/"Off-to-On" (mS) 50 – 90*, 50 – 90*
High Speed Input Signal Response Time – dc Models ONLY: "On-to-Off"/"Off-to-On" (mS) 0.5/0.3
Enclosure Type IP20
Note: Delay time varies with the ac line input voltage (85 –265 Vac)
‘KBMS2’ Smart Programmable Relays➤ 10, 12 and 20 I/Os. ➤ Expandable up to 44 I/Os➤ ac or dc Digital and Analog Inputs➤ Transistor or High Current Relay Outputs➤ Built-In 48 Character Backlit LCD Display ➤ Simplified Ladder Logic Programming➤ Front Panel Programming or by optional
PR-Link™ Windows® 98/2000*/ NT*/ME/XP Software
KBMS Series 1 (To be discontinued when existing stock is depleted)Total I/O Inputs Digital
ac/dcInputs
Analogue 0-10Vdc
Relay Outputs
Real Time Clock Types
Analogue Comparator
Types
Type Number
Catalogue Number
List Price $(xKG)
10 6-ac – 4 – – 16000 KBMS-10MR-D 212
10 6-ac – 4 – – 16020 KBMS-10MR-A 220
10 6-ac – 4 2 – 16030 KBMS-10HR-A 232
12 6-dc 2 4 2 7 16035 KBMS-12HR-D 241
20 12-dc – 8 – – 16040 KBMS-20MR-D 312
20 10-dc 2 8 2 7 16050 KBMS-20HR-D 320
20 12-ac – 8 – – 16060 KBMS-20MR-A 330
20 12-ac – 8 2 – 16070 KBMS-20HR-A 339
Windows PC Software CD + Cable used for remote programming KBMS-PRLINK-KIT 144
Removable EEPROM used to upload/download from other KBMS units KBMS-MEMORY PACK 43
KBMS2 Programmable Relays Total I/O
Inputs Outputs Analogue Comparators
PWM Output
Type Number
Catalogue NumberList Price (xKG)Digital Analogue➂ Relay Transistor
12 6 2 4 – 15 – 16200 KBMS2-12HR-D➀ 20412 6 2 – 15 ✓ 16210 KBMS2-12HT-D➀ 21110 6 – 4 – – – 16220 KBMS2-10HR-A➀ 19620 12 4 8 – 15 – 16230 KBMS2-20HR-D➀ 27120 12 4 – – – ✓ 16240 KBMS2-20HT-D➀ 27920 12 – 8 – – – 16250 KBMS2-20HR-A➀ 28620 12 4 8 – 15 – 16260 KBMS2-20VR-D➀ 27920 12 4 – 8 15 ✓ 16270 KBMS2-20VT-D➀ 2868 4 – 4 – – – 16300 KBMS2-8ER-D➁ 1288 4 – – 4 – – 16310 KBMS2-8ET-D➁ 1288 4 – 4 – – – 16320 KBMS2-8ER-A➁ 128
Windows PC Software CD + Cable used for remote programming KBMS2-PR-LINK 128Removable EEPROM used to upload/download from other KBMS units KBMS2-MEM-LINK 38
➀ DC models contain 2 high speed inputs (I1 and I2). ➁ Expansion modules. ➂ Analogue inputs may be used as Digital Inputs
NEWMODELSNEW FEATURES
20 1300 BALDOR ✆ 1300 225 367
ac Inverter Drives
Features➤ Operates standard 208 – 240Vac 3-phase motors,
with 115 or 240 Vac input single phase.➤ Controls 50Hz, 60Hz motors with a convenient
jumper selection.➤ Sinewave coded PWM - provides high motor torque
and efficient operation.➤ Power Start™ - provides more than 200% starting
torque.➤ 30:1 speed range with full motor torque.
(Dependant on motor capability)➤ 16 kHz Switching Frequency - provides quiet motor
operation.➤ I2t Motor Overload Protection - provides motor
overload protection and eliminates nuisance trips.➤ Slip Compensation with Boost - provides excellent
load regulation over a wide speed range.➤ Electronic Inrush Current Limit (EICL™) - eliminates
harmful inrush ac line current during start up.➤ dV/dT Filter - reduces harmful voltage spikes to
motor.➤ Regeneration protection - eliminates tripping due to
bus overvoltage.➤ Compact chassis mount (KBVF)
0.37kw unit = 110 x 99 x 67.5mm (approx).0.75kW unit = 110 x 119 x 143mm (approx).
➤ Jumper selections for –Forward - Stop - Reverse/EnableAutomatic/Manual Start0 - 60, 0 - 120, 0 - 50 Hz
➤ Trim Pot Adjustments for –Minimum Speed - MINMaximum Speed - MAXAcceleration - ACCELDeceleration - DECELSlip Compensation - COMPCurrent Limit - CL
➤ Protection Features –MOV input transient protection.Short circuit protection phase to phase at motor.Micro controller self-monitoring and auto reboot.Overvoltage and undervoltage protection.
➤ LED diagnostic indicators –Power On; Motor Overload; I2t Trip; Undervoltage; Overvoltage; Stop; Short Circuit Trip; Micro Controller Status.
‘KBVF’ ac Inverter Drives➤ 0.37kW or 1.1kW
ac 3 Phase Motor Capacity➤ 1 phase 240Vac input➤ 3 phase 230Vac output➤ The KBVF adjustable frequency
(inverter) drives are designed to provide variable speed control of standard 3 phase ac induction motors.
➤ Adjustable linear acceleration and deceleration are provided, making the drive suitable for soft start applications.
➤ The output voltage is sinewave coded PWM operating at 16kHz, which provides high motor torque, high efficiency and low noise.
➤ KBVF is a fully featured drive, and due to the user friendly design, is easy to install and operate. Simple trimpot adjustments eliminate the computer-like programming required on many drives. However, for most applications no adjustments are necessary.
Maximum Motor kW
Input Voltage 1 Ph-50/60Hz
Vac
Nominal Output
Voltage Vac
Max. Cont. Output
A/Phase (RMS)
Max. Input Amps
KB Part Nº Catalogue Nº List Price
$
Group
0.07 115/230 0 – 230 1 4 9581 KBVF-21D 233 KB
0.37 115 0 – 230 2.4 9.6 9957 KBVF-13 278 KB
0.37 230 0 – 230 2.4 6.0 9958 KBVF-23 286 KB
0.37 115/230 0 – 230 2.4 9.6/6.0 9959 KBVF-23D 295 KB
0.75 115 0 – 230 4.0 16.0 9997 KBVF-14 340 KB
0.75 230 0 – 230 4.0 10.0 9978 KBVF-24 349 KB
0.75 115/230 0 – 230 4.0 16.0/10.0 9979 KBVF-24D 358 KB
1.1 115/230 0 – 230 5.5 22.0/14.0 9496 KBVF-26D 465 KB
Options
SIVF Signal isolator - to be discontinued when stock depleted. Replace with 9597. 9474 104 KX
SIVF-2G Signal isolator with Run/Fault relay, installs on end of KBVF 9597 70 KX
KBVF-MSB Multi-speed board for KBVF, installs on end of KBVF 9503 70 KX
DBVF Dynamic braking module-provide 25% continuous braking and 200% inst. Braking torque
9598 170 KX
DIVF Digital interface Module, ModBUS, RS485 9568 91 KX
COM Kit Kit w/DLM, Drive Link, USB Adaptor, PC-DLM & DLM-Drive cables 9582 361 KX
DLM Download module 9549 157 KX
DriveLink Programming software 9583 N/C –
Cable for DLM to PC serial 9663 16 KX
USB Adaptor for DLM to PC serial cable 9665 157 KX
Cable for DLM to KBVF/KBAC 9584 40 KX
CHOKE 3 Phase 230Vac Choke for EMC/EMI protection (Ferrite core) 9992 25 KX
KBRF-250 Industrial EMC/EMI footprint filter KBRF-250 117 KX
NOTE: ‘SIVF’ Signal Isolator will mount to the end of the heat sink of KBVF units built after April 1999.9992 Choke is wired in series between control and motor to reduce EMC/EMI. Additional inductance assists to limit voltage spikes. Particularly effective where multiple KBVF’s are used in close proximity to each other.
211300 BALDOR ✆ 1300 225 367
GENESIS ‘KBAC’ ac Inverter Drives➤ Variable Speed Control for ac 3 Phase
Motors of 0.18kW to 3.7kW➤ ‘KBAC’ has IP65 (NEMA-4X) Washdown
and Watertight Enclosure with front panel mounted control switches and speed potentiometer
➤ The KBAC-24D Adjustable Frequency Drive is a variable speed control in a NEMA-4X/IP-65 washdown and watertight enclosure.
➤ Several models are available to operate on an input of 115 or 230Vac for 230Vac 3ph output of 230Vac for Delta connection of induction motors up to 1.5kW. The KBAC-48 has a 460Vac/3ph input and 460Vac
➤ The sine wave coded Pulse Width Modulated (PWM) output operates at a frequency of 16kHz which provides high motor torque, high efficiency, and low noise.
➤ Due to its user friendly design, the KBAC is easy to install and operate. Tailoring to specific applications is accomplished via selectable jumpers and trimpot adjustments, which eliminate the computer-like programming required on other drives. However, for most applications no adjustments are necessary.
Features➤ Adjustable RMS Current Limit:➤ I2t Motor Overload Protection: Prevents motor
burnout and eliminates nuisance tripping.➤ Adjustable Slip Compensation with Boost: Provides
excellent load regulation over a wide speed range.➤ Speed Range of 60:1: With full motor torque
(depending on motor performance).➤ Power Start™: Delivers over 200% motor torque to
ensure startup of high frictional loads.➤ Electronic Inrush Current Limit (EICL™): Eliminates
harmful ac line inrush.➤ Adjustable Linear Acceleration and Deceleration:
Make the drive suitable for soft-start applications.➤ CE and UL (US) compliant: An external signal
isolator is also available.➤ Start/Stop Switch: On front panel, provides
electronic start/stop functions.➤ Short Circuit Protection: Shuts the control down
should a short circuit occur at the motor (phase-to-phase).
➤ Regeneration Protection: Eliminates tripping due to bus overvoltage.
➤ Diagnostic LEDs: Power On and Control Status.➤ Other Protection Features: Undervoltage,
overvoltage, MOV input transient protection, micro-controller self-monitoring and auto-reboot.
➤ Barrier Terminal Block: Facilitates connection of motor and ac line wiring.
➤ Trimpot Adjustments: Minimum speed, maximum speed, acceleration, deceleration, slip compensation, boost, current limit. Dimensions KBAC-24D approx: 242H x 140W x 149Dmm.
Dimensions KBAC-27D approx: 249H x 192W x 184Dmm.Dimensions KBAC-48 approx: 249H x 192W x 184Dmm.
ac Inverter Drives
Maximum Motor kW
Input Voltage 1 Ph-50/60Hz
Vac
Nominal Output Voltage
Vac/3ph
Max. Cont. Output A/
Phase (RMS)
Max. Input Amps
KB Part Nº Catalogue Nº List Price $
Group
0.75 115/230 0 – 230 3.6/6.7 16/10 9987 KBAC-24D 535 KB1.1 115 0 – 230 5.5 22 9520 KBAC-27D 760 KB1.5 230 0 – 230 6.7 15 9520 KBAC-27D 760 KB3.7 460/3ph 0 – 460 8.3 9.6 9540 KBAC-48 984 KB
Options for KBAC-24DSwitch Forward/stop/reverse switch 9480 19 KXSwitch Run/stop/jog switch 9340 19 KXSwitch Auto/manual switch kit 9481 19 KXSwitch KBAC-24D Power On/Off switch 9482 19 KXSIVF Bipolar signal isolator 2G, installs inside of all KBACs 9600 64 KX9507 RFI line filter, installs inside KBAC-24D RFAC-24 37 KXOptions for KBAC-27DSwitch Forward/stop/reverse switch 9480 19 KXSwitch Run/stop/jog switch 9340 19 KXSwitch Auto/manual switch kit 9481 19 KXSwitch Power On/Off switch 9523 28 KXSIVF Bipolar signal isolator 2G, installs inside of all KBACs 9600 64 KX9512 RFI filter, installs inside KBAC-27D, (for use with ON/OFF switch 9523) RFAC-27DS 45 KXOptions for all KBAC-489515 RFI filter, installs inside KBAC-48 (for use without switch 9532) RFAC-48NS 113 KX9479 RFI filter, installs inside KBAC-48, (for use with ON/OFF switch 9532) RFAC-48S 113 KXSwitch Power On/Off switch 9532 44 KXOptions for all KBAC ModelsDIVF Digital interface Module, ModBUS, RS485 9568 91 KXCOM Kit Kit w/DLM, Drive Link, USB Adaptor, PC-DLM & DLM-Drive cables 9582 361 KXDLM Download module 9549 157 KX
DriveLink Programming software 9583 N/CCable for DLM to PC serial 9663 16 KXUSB Adaptor for DLM to PC serial cable 9665 157 KXCable for DLM to KBVF/KBAC 9584 40 KX
➤ Jumper Selectable Features: Line input ac voltage 115/230; motor power 0.18,0.37, 0.56, 0.75kW; auto or manual restart; motor frequency 50/60Hz; fixed or adjustable boost.
➤ Optional Accessories: See table
22 1300 BALDOR ✆ 1300 225 367
‘KB GENESIS™’ Drives Features & Specifications
ac Inverter Drives
Genesis ‘E’ Series Genesis ‘N’ Series
‘KBE2’ Digital Inverter Drives➤ Variable Speed Control for 0.18 to 2.2kW
3ph ac Motors➤ Easy to Install and Operate with Built-in
Keypad and LED Display for Simplified Programming and Operation
➤ Models for 230V/1ph or 415V/3ph Input➤ IP20 or IP65 Enclosures ➤ The KBE2 Series Drives are compact,
easy to install and operate, and provide a cost effective solution for variable speed control of motors up to 2.2kW.
➤ The 3 digit LED display and digital keypad provides simple, direct operation and set-up.
➤ Remote control operation is achieved via isolated terminals for Start/Stop, Forward/Reverse, and Analogue Signal Input/Output.
➤ KBE2 drives include the same comprehensive protection features that have been built into the KBN2 and KBV2 drives.
‘KBN2’ Digital Inverter Drives➤ Variable Speed Control for 0.18 to
23kW 3ph ac Motors➤ Multi-Featured Drives with 7 Preset
Speeds, Process Timers and Sequence Control
➤ Remote Mountable Keypad/Display➤ RS-232/485 Communications Options
for Programming➤ The KBN2 Series Drives have an
extended range of in-built features and programmable functions to provide tailor-made operation.
➤ The remote mountable keypad with 4 digit LED display provides direct programming and operation functions along with custom readouts.
➤ The KBN2 drives include features such as preset speeds, process timers and sequence control functions.
➤ PC based RS-232/485 communications options provide easy access for advanced programming situations.
Feature Description KBE2 Series KBN2 Series
STANDARD FEATURES
LED Digital Display with Keypad (Number of Digits)
3 4
Multifunction Control Inputs (Number of Inputs)
2 3
Preset Speeds and Jog (Number of Speeds)
3 7
Isolated Remote Signal Inputs ✓ ✓
Manual or Automatic Start ✓ ✓
Regenerative and dc Injection Braking ✓ ✓
Preset V/Hz Curves with Program Modification
✓ ✓
Diagnostics with Fault Codes ✓ ✓
Output Relay ✓ ✓
DIN Rail Mounting 1 ✓ –
3-Wire Remote Start/Stop – ✓
Remote Mountable Keypad 2 – ✓
Multifunction Output Signal (Open Collector)
– ✓
Windows 95/98 Based Software for PC/Inverter Communications 3
– ✓
Custom Readouts – ✓
Process Control with PID Loop – –
DeviceNet, PROFIBUS and LonWorks Communication Protocol
– –
Sensorless and Closed Loop Flux Vector Control
– –
Auto Tuning/Motor Characteristics – –
Process Timers – ✓
PROTECTION FEATURES
Overvoltage/Undervoltage Protection ✓ ✓
Regeneration Protection ✓ ✓
Stall Protection ✓ ✓
Phase-to-Phase Short Circuit Protection ✓ ✓
Phase-to-Ground Short Circuit Protection ✓ ✓
I2t Motor Overload Protection ✓ ✓
Overtemperature Protection ✓ ✓
PERFORMANCE SPECIFICATIONS
Horsepower Range (kW) 0.18 – 2.3 (0.37 – 23)
Frequency Range (Hz) 0.1 – 200 0.1 – 400
Switching Frequency Range (kHz) 4 – 16 1 – 12
Frequency Resolution (Hz) 0.1 0.01
Accel/Decel Range (Seconds) 0.1 – 999 0.1 – 3600
Overvoltage Trip Point @ 230 Vac, @ 460 Vac (Vac4)
290, 580 300, 600
Undervoltage Trip Point @ 230 Vac, @ 460 Vac (Vac4)
140, 280 140, 280
Maximum Vibration (G) 1 0.5
ac Line Input Voltage Range (Vac) 230 ±15%, 415 ±10%)
Input Line Frequency Range (Hz) 48 – 62
Output Waveform Sine Coded PWM
Overload Rating (%) 150% for 1 Minute
Operating Temperature Range (°C) –10 to 50
Humidity (Relative %) 0 – 95 (Non Condensing
Remote Analog Signal Input 0 – 10 Vdc, 4 – 20 mAdc, 0 – 20 mAdc
Output Relay Contact Rating 1 Amp @ 30 Vdc, 250 Vac
Analog Output Voltage (Vdc) 0 – 10
Approvals CE, cULus, (C-✓), ISO-9002
231300 BALDOR ✆ 1300 225 367
ac Inverter Drives
GENESIS ‘N’ Series
‘KB GENESIS™’ Drive Product Range & Dimensions
RatedMotorkW
Input VoltageNom. ac LineVac-50/60Hz
Input Phases
Output CurrentMax. Cont.
RMS Amps/Phase
BaldorCatalogue
Nº
KBPartNº
DimensionReference
Code
ListPrice(xKG)
KBE2 Drive in IP20 Enclosure
0.18 230 1 1.4 KBE2-2125-P-F 11025 A 286
0.37 230 1 2.3 KBE2-2150-P-F 11035 A 309
0.75 230 1 4.2 KBE2-2101-P-F 11045 A 331
1.5 230 1/3 7.5 KBE2-2202-P-F 11055 B 521
2.2 230 1/3 10.5 KBE2-2203-P-F 11065 B 638
0.75 415 3 2.3 KBE2-4301-P-F 11075 E 596
1.5 415 3 3.8 KBE2-4302-P-F 11085 E 684
2.2 415 3 5.2 KBE2-4303-P-F 11095 F 770
KBE2 Drive in IP65 Enclosure (Indoor Use)
0.18 230 1 1.4 KBE2-2125-4-F 11525 C 477
0.37 230 1 2.3 KBE2-2150-4-F 11535 C 498
0.75 230 1 4.2 KBE2-2101-4-F 11545 C 521
KBN2 Drive in IP20 Enclosure
0.75 415 3 2.3 KBN2-4301-1 12100 E 683
1.5 415 3 3.8 KBN2-4302-1 12110 E 765
2.2 415 3 5.2 KBN2-4303-1 12120 F 984
3.7 415 3 8.8 KBN2-4305-1 12130 F 1175
5.5 415 3 13 KBN2-4307-1 12140 G 1554
7.5 415 3 17.5 KBN2-4310-1 12150 G 2022
11 415 3 25 KBN2-4315-1 12160 H 2585
15 415 3 32 KBN2-4320-1 12170 H 3011
23 415 3 48 KBN2-4330-1 12180 H 4317Catalogue Nº with suffix -F = inbuilt RFI filter
Reference W x H x DmmA 72 x 132 x 118B 118 x 143 x 172C 141 x 216 x 178D 107 x 162 x 140E 149 x 184 x 158F 185 x 215 x 167G 200 x 300 x 199H 250 x 400 x 240
Enclosure Dimensions
24 1300 BALDOR ✆ 1300 225 367
ac Inverter Drives
GENESIS ‘N Series
GENESIS ‘E’ Series
‘KB GENESIS™’ AccessoriesDescription Baldor
Catalogue NºKB
Part NºList Price(xKG)
Accessories for KBE2 DrivesDIN Rail Mount Kit E2-DR-201 14000 11External RFI Filter 230V/1ph for 1.5kW Drive F-E2-2102 14010 88External RFI Filter 415V/3ph for 2.3kW Drive F-E2-4103 14015 217Accessories for KBN2 DrivesExternal EMI Filter 230V/1ph/10A for 0.75kW Drives EMI-2102 14020 98External EMI Filter 230V/1ph/20A for 1.5kW Drives EMI-2202A 14030 121External EMI Filter 230V/1ph/20A for 2.3kW Drives EMI-2202B 14040 138External EMI Filter 415V/10A for 0.75-3.8kW Drives EMI-4103B 14060 396External EMI Filter 415V/20A for 5.6-7.5kW Drives EMI-4203 14070 431External EMI Filter 415V/60A for 11-23kW Drives EMI-4603 14075 832Keypad Extension Cable 1 metre for 0.75-3.7kW Drives EC-OP01-1M 14090 98Keypad Extension Cable 2 metre for 0.75-3.7kW Drives EC-OP01-2M 14100 121Keypad Extension Cable 3 metre for 0.75-3.7kW Drives EC-OP01-3M 14110 132Keypad Extension Cable 1 metre for 5.5-23kW Drives EC-OP02-1M 14120 109Keypad Extension Cable 2 metre for 5.5-23kW Drives EC-OP02-2M 14130 127Keypad Extension Cable 3 metre for 5.5-23kW Drives EC-OP02-3M 14140 138Communications Kit RS-232 N2-RS232 14150 123Communications Kit RS-485 N2-RS485 14160 165Brake Resistor 415V/3ph for 0.75kW Drives N2BR-401 14230 33Brake Resistor 415V/3ph for 1.5kW Drives N2BR-402 14240 25Brake Resistor 415V/3ph for 2.3kW Drives N2BR-403 14250 55Brake Resistor 415V/3ph for 3.8kW Drives N2BR-405 14260 75Brake Resistor 415V/3ph for 5.6kW Drives N2BR-408 14270 144Brake Resistor 415V/3ph for 7.5kW Drives N2BR-410 14280 161Communications Accessories for GENESIS DrivesDown Load Module Starter Kit, includes KBE2 to DLM Comms Cable, KBN2 to DLM Comms cable, S/ware Disk w/PC to DLM serial cable.
KB-DLM-KIT 19006 249
Inverter Down Load Module, basic module no cables or S/ware. KB-DLM 19005A 178KBE2 Inverter to DLM Communication Cable KB-DLM-E2 14147 18KBN2 Inverter to DLM Communications Cable KB-DLM-N2 14152 18S/Ware Disk w/PC to DLM Serial Cable KB-DLM-DL-
RS23219007 152
S/Ware Disk w/PC to DLM USB Cable KB-DLM-DL-USB – 187
251300 BALDOR ✆ 1300 225 367
ac Soft-Start/Brake Controls
Multi-Purpose Module Type ‘M’➤ The Baldor Type ‘M’ multi-purpose
starter is a versatile, reduced voltage starter with adjustable ramp up and ramp down features for effective, controlled starting and stopping of any three phase motor driven equipment.
➤ Tachometer feedback may be utilised to provide consistent and smooth starting and stopping times, independent of load.
➤ Adjustable current limit allows for constant current starting of high inertia loads.
➤ Current ceiling features reduce peak power demand and associated penalty costs.
➤ Three phase, full wave control of voltage and current to the motor are provided by six SCR’s (silicon controlled rectifiers) plus snubber and MOV (metal oxide varistors) surge voltage protection.
➤ Starting, running and shutdown contacts are provided along with visual LED (light emitting diode) indicators to provide a standard or programmable type interface with visual set up or troubleshooting capabilities.
➤ A ten segment LED bar graph displays starting, running and slow down current to assist with set up, adjustment and troubleshooting.
➤ Dip switch selection of operating modes – current limit to closely match motor rating; ramp down on/off; current monitor as indication only or initiate control shut down; over current monitor on/off; tachometer feedback on/off for linear ramps; user current limit on/off allows current to exceed user limit during pulse start time only; by-pass on/off enables control to utilise by-pass contactor during run to reduce heat for use in sealed enclosure applications.
➤ User adjustments for all critical facets of ramp up, running, monitoring and ramp down.➤ Ramp up time – 3 to 30 seconds.➤ Ramp up initial starting torque
– 0 to 75% line voltage.➤ Current limit during ramp up and ramp down
– 100 to 400% FLA.➤ Starting pulse time for high friction loads
– 0 to 2 seconds.➤ Ramp down time/soft stop – 2 to 30 secs.➤ Ramp down initial stopping torque
– full speed/voltage to 0.➤ Current monitor set point. Maximum running
current – 50 to 400% FLA.➤ Maximum power factor correction to save
energy when motor is lightly loaded – 0 to maximum.
Baldor custom built motor control panel
Baldor ac Soft-Start Controls➤ Baldor’s range of multi-purpose ac Soft-Start motor control modules allow you to build
new, or modify present motor starting systems, to incorporate the latest in soft-start technology, at the lowest possible cost. Baldor can also custom build, packaged, ready-to-use soft-start and motor control systems to your requirements.
Type ‘M’Module
Description Maximum CurrentAmps
InputPower
CatalogueNumber
ListPrice
$(xE7)
Encapsulated ‘M’ Module/Power Cells/MOV protection 8 380/415V MA9-008-CA 1,061Encapsulated ‘M’ Module/Power Cells/MOV protection 16 380/415V MA9-016-CA 1,127Encapsulated ‘M’ Module/Power Cells/MOV protection 30 380/415V MA9-030-CA 1,326Kit (Type ‘M’ Module, Power Cells, C. T., MOV protection) 55 380/415V MB9-055-EA 1,948Kit (Type ‘M’ Module, Power Cells, C. T., MOV protection) 80 380/415V MB9-080-EA 2,805Kit (Type ‘M’ Module, Power Cells, C. T., MOV protection) 160 380/415V MB9-160-EA 3,088Kit (Type ‘M’ Module, Power Cells, C. T., MOV protection) 250 380/415V MB9-250-EA 3,479Kit (Type ‘M’ Module, Power Cells, C. T., MOV protection) 420 380/415V MB9-420-EA 4,546Electronic Brake for single phase motors 15 240Vac BQ2-015-CP 534NEW
Electronic Motor Brake - 1 phase
Electronic Motor Brake - 1phApplications: ➤ Efficient alternative to mechanical brakes for motor
to 3kW, suitable for woodworking machinery, machine tools, bench grinders, and buffers. Ideal fro OEM equipment or for retrofitting into an existing applications.
Features:➤ Automatic braking for single phase motors. User
adjustable torque and brake time. Prevents restarts after power has been removed for 7 seconds. Accommodates frequent start/stop applications.
NEW
26 1300 BALDOR ✆ 1300 225 367
The Baldor H2 family of drives operate three phase induction
motors in several control modes as either an open or closed loop
control. Open loop speed control is available as Inverter Volts per Hertz
and Encoderless Vector. Closed loop Vector control is accomplished using a sophisticated fourth generation space vector control algorithm and motor feedback. Additional H2 drive models are available to control closed loop permanent magnet AC servomotors using motor feedback.
Inver ter Volts per Hertz is the t radi t ional method to contro l AC motors in adjustable speed applications. Easy setup and operation right out of the box make this control mode the most popular motor control method today. Used for a variety of applications that require adjustable speed operation and good speed regulation over a limited operating speed range including pumps, fans, and general machinery applications. Volts per Hertz is the control method of choice
for applications where mul t ip le motors are
operated simultaneously f rom one motor
control.
Reliable. Easy to Use. High Performance.
Encoderless Vector operation is available when tight speed and current control is desired in an open loop control environment. If you need near closed loop performance without the complexity of additional wiring and setup, consider Encoderless Vector control. Using similar control algorithm as closed loop vector drives, low speed operation near zero speed is possible with good motor current control. If you’re operating a process such as mixing that needs to detect when the desired viscosity is reached or metering pumps where tight speed control is required, then consider applying the Encoderless Vector control mode available in the H2 drives.
Closed Loop Vector operation is the ultimate control of AC induction motors. Using a motor mounted encoder, or similar feedback sensor, the control is able to precisely control motor torque and associated opera t ing speed. Us ing fas t microprocessors and current sensors, the H2 Vector Drive can segregate motor current into components that produce torque from the currents that produce motor heating. By minimizing the heating component of current and accurately controlling the torque component of applied current, the motor will behave very much like a DC Motor but without the maintenance. Full torque at zero speed, abil i ty to direct ly command motor torque, t ight speed regulation, and high-speed motor operation are all available. Easy setup is accomplished with
selectable rotational or stationary auto-tuning. Adaptive tuning will also automatically tweak the control loop adjustments while the motor is operating.
Inverter
Vector
"A New Generation in Drive Technology"
271300 BALDOR ✆ 1300 225 367
Simple to program and operate, the Baldor H2 keypad makes operating, programming and monitoring a snap. The keys on the keypad depress so you “feel” the key has been pushed. We also feature a 128 x 64 graphical display. Best of all, this easy to use keypad is harmonized to operate any H2 product in all power ranges.
Adjusting the control is as simple as it gets because of block programming. With the H2, you’ll never have to scroll through every parameter to get to the one you need. With block programming, the adjustments are grouped in blocks of like adjustments. The H2 keypad enclosure is rated IP65 when mounted on a panel and is designed for remote mounting up to 65 metres away.
Baldor H2 drives offer a wide variety of plug-in expansion boards to allow controls to be interfaced with various inputs and outputs. One, two or three expansion boards may be mounted into the control to custom tailor the inputs, outputs, and feedback requirements to the application. Baldor also offers several expansion boards that allow direct interfacing with popular PLC’s. Depending on the choice, these may consist of an expansion board, software, or a combination of both. All H2 drives include a Modbus RTU Communications port as standard.
The Keypad
"The best HMI keypad in the industry"
Expansion
1300 BALDOR ✆ 1300 225 367
28 1300 BALDOR ✆ 1300 225 367
ac Inverter andEncoderless Vector Drives
ac Inverter/Flux Vector Drives
CatalogueNº
Input Volts ac
Standard 2.5kHz PWM Frequency Quiet 8kHz PWM Frequency
Cabinet Size Code
List Price$(xE1)
Constant Torque Constant Torque
kWOutput
Continuous Amps
Output Peak Amps
kWOutput
Continuous Amps
Output Peak Amps
IHH601-EIHH601-W
240/120 0.75 4.2 7.4 0.56 3.2 5.6 AA864929
IHH602-EIHH602-W
240/120 1.5 6.8 11.9 0.75 4.2 7.4 AA982
1,056
IHH603-EIHH603-W
240/120 2.2 9.6 16.8 1.5 6.8 11.9 AA1,1471,234
IHH401-EIHH401-W
415 0.75 2.1 3.7 0.56 1.6 2.8 AA894961
IHH402-EIHH402-W
415 1.5 3.4 6 0.75 2.1 3.7 AA1,0171,104
IHH403-EIHH403-W
415 2.2 4.8 8.4 1.5 3.4 6 AA1,1891,284
IHH405-EIHH405-W
415 3.7 7.6 13.3 2.2 4.8 8.4 AA1,3671,442
IHH407-EIHH407-W
415 5.5 11 19.3 3.7 7.6 13.3 AA1,8572,073
IHH410-EIHH410-W
415 7.5 14 24.5 5.5 11 19.3 AA1,9262,201
IHH415-E 415 11 21 36.8 7.5 14 24.5 B 3,117
IHH420-E 415 15 27 47.2 11 21 36.8 B 3,755
IHH425-E 415 18.5 34 59.5 15 27 47.2 B 4,948
IHH430-E 415 22 40 70 18.6 34 59.5 C 5,642
IHH440-E 415 30 52 91 22.3 40 70 C 6,982
IHH450-E 415 37 65 114 30 52 91 C 8,620
IHH460-E 415 45 77 135 37 65 114 D 11,242
IHH475-E 415 55 96 168 45 77 135 D 12,411
IHH4100-E 415 75 124 217 55 96 168 D 13,314
IHH4125-E 415 93 156 273 75 124 217 D 15,507
Features➤ IP23 enclosure (Cat Nº xxx-E)➤ IP65 enclosure (Cat Nº xxx-W)➤ Comprehensive functions and expansion
capabilities, with user-friendly set-up and management
➤ Output frequency 0 to 500 Hz➤ Peak overload capacity of 175%➤ Separate accel/decel rates➤ Controlled reversing➤ Two and three input PID process control
loop➤ Selectable preset speeds➤ Jog speed➤ Plug-in I/O connectors➤ Micro PLC functions
Design Specifications➤ Process follower 0-5 VDC, ±5VDC,
±10VDC , 0-20mA, keypad network, serial, 0-10VDC, 4-20mA
➤ Coast or ramp to stop➤ Dynamic braking➤ DC injection braking➤ 2 analog meter outputs➤ 2 opto-isolated outputs➤ 2 relay outputs➤ Energy Optimization➤ Adaptive Tuning
Protective Features➤ DC bus charge indicator➤ Fault indicator➤ Adjustable time based overload➤ Cause of last 10 trips retained in memory➤ Fault trace function➤ Digital display for fault conditions with
real time clock➤ Linear heat sink thermal sensor➤ Isolated control circuitry
Washdown Duty H2 Drive with IP65 Enclosure and Baldor Stainless Steel Washdown Duty ac Motor
SERIES H2 HARMONISED DRIVESIP23 ENCLOSURE DIMENSIONSCabinet
Size Code
‘H2 Drives’ Cabinet Dimensions mm Shipping Weight Aprx.kg
Outside MountingHeight Width Depth Height Width
AA 311 202 208 298 187 10B 457 231 248 438 178 14C 559 231 248 540 178 28D 711 292 330 692 241 55
Catalogue Number
Standard 2.5kHz PWM Frequency Quiet 8kHz PWM Frequency
Cabinet Size Code
List Price
$(xE1)
Constant Torque Constant Torque
ControlRated kW
Output Continuous
Amps
Output Peak Amps
ControlRated kW
Output Continuous
Amps
Output Peak Amps
ZHH401-E 0.75 2.1 3.7 0.56 1.6 2.8 AA 1,251
ZHH402-E 1.5 3.4 6 0.75 2.1 3.7 AA 1,403
ZHH403-E 2.2 4.8 8.4 1.5 3.4 6 AA 1,617
ZHH405-E 3.7 7.6 13.3 2.2 4.8 8.4 AA 1,806
ZHH407-E 5.5 11 19.3 3.7 7.6 13.3 AA 2,318
ZHH410-E 7.5 14 24.5 5.5 11 19.3 AA 3,256
ZHH415-E 11 21 36.8 7.5 14 24.5 B 3,982
ZHH420-E 15 27 47.2 11 21 36.8 B 4,523
ZHH425-E 18.5 34 59.5 15 27 47.2 B 5,790
ZHH430-E 22 40 70 18.6 34 59.5 C 6,496
ZHH440-E 30 52 91 22.3 40 70 C 8,089
ZHH450-E 37 65 114 30 52 91 C 9,930
ZHH460-E 45 77 135 37 65 114 D 11,469
ZHH475-E 55 96 168 45 77 135 D 12,737
ZHH4100-E 75 124 217 55 96 168 D 15,382
ZHH4125-E 93 156 273 75 124 217 D 17,689
291300 BALDOR ✆ 1300 225 367
ac Vector Drives ➤ Closed Loop Vector Control
Features➤ Comprehensive functions and expansion
capabilities, with user-friendly set-up and management
➤ IP23 enclosure as standard➤ Output frequency 0 to 500 Hz➤ Peak overload capacity of 175%➤ Automatic tuning to motor➤ Full rated torque down to zero speed➤ Digital speed or torque control➤ Two and three input PID process control
loop➤ Linear or S-curve deceleration➤ 15 preset speeds/positions➤ Plug-in I/O connectors➤ Micro PLC functions
Design Specifications➤ Motor shaft orient to marker➤ Process follower 0-5 VDC, ±5VDC,
±10VDC , 0-20mA, keypad network, serial, 0-10VDC, 4-20mA
➤ Coast or ramp to stop➤ 2 assignable analog outputs➤ 2 assignable opto outputs➤ 2 assignable relay outputs➤ 2 assignable analog inputs➤ Adaptive tuning to load➤ USB 2.0 full speed port➤ ModBus RTU port
Protective Features➤ Adjustable current limit➤ Isolated control circuitry➤ Digital display for fault conditions with
real time clock➤ Fault track function➤ Selectable automatic restart at
momentary power loss➤ DC bus charge indicator➤ Cause of last 10 trips retained in
memory➤ 24 VDC isolated user supply➤ Isolated encoder power supply
H2 Drives with IP23 Enclosure
ac Inverter/Flux Vector Drives
30 1300 BALDOR ✆ 1300 225 367
ac Inverter/Flux Vector Drives
➤ IP23 Enclosure for general purpose models (Cat Nº xxx-E and xxx-EO).
➤ IP65 Enclosure for Wash-Down models (Cat Nº xxx-W)
➤ Multi-Rated with choice of 4 operating modes and simple selection by program entry.
➤ General purpose models with IP23 (NEMA 1) cabinet enclosure.
➤ Wash-Down Duty models (-W suffix) with IP65 (NEMA 4X) cabinet enclosure.
➤ Choice of models for 230Vac or 415Vac input. 230Vac models are suitable for either 1 or 3 phase input to produce 3 phase output.
➤ Removable remote mountable IP65 operator keypad/display with membrane keys and sure-touch tactile feel.
➤ English text information provided by a built-in 32 character, backlit LCD display for user friendly programming and operation.
➤ Fifteen user programmable speed settings.➤ Full digital control for precise operation.➤ 16/32 BIT Microprocessor controlled PWM output.➤ IGBT power technology for quiet operation, and
intelligent power modules on most sizes.➤ Full four quadrant operation (motoring and
generating in either direction) with braking option.➤ Process Control – built-in PID controller allowing
connection of process feedback and setpoint signals for direct control of user processes including pressure, temperature, load etc.
➤ Process following.➤ 2 programmable analogue meter outputs and 4
programmable OPTO outputs.➤ Extensive automatic control and motor protection.➤ Selectable automatic restart at momentary power
loss with free setting of maximum number of trips and time between trip and reset.
➤ LCD and LED displays with unique error messages for each fault, plus cause of last 31 trips retained in memory.
➤ Optional plug-in expansion boards to provide RS232/422/485 communications/control, pneumatic interface and other facilities for specific applications. (See accessories page 31 to 33).
Series ‘ID15H’ ac Inverter Drives ➤ Harmonised ➤ Quiet Drive™ ➤ Multi-Rated
Inverter Drive Catalogue Number
Input Volts ac
Standard 2.5kHz PWM Frequency Mode
Quiet Drive™ 8kHz PWM Frequency Mode
Cabinet Size Code
List Price $(xE1)
Constant Torque Constant Torque
Controller Rated kW
Output Continuous
amps
Output Peak amps
Controller Rated kW
Output Continuous
amps
Output Peak amps
ID15H201-EID15H201-W
230* 0.75 4.0 8.0 0.56 2.8 4.0 A925
1,270
ID15H202-EID15H202-W
230* 1.5 7.0 14.0 0.75 4.0 8.0 A1,0531,445
ID15H203-EID15H203-W
230*‡ 2.2 10 20 1.5 7.0 14 A1,2301,685
ID15H205-EID15H205-W
230*‡ 3.7 16.0 32 2.2 10 20 A1,4152,024
ID15H401-EID15H401-W
415 0.75 2.0 4.0 0.56 1.5 3.0 A920
1,187
ID15H402-EID15H402-W
415 1.5 4.0 8.0 0.75 2.0 4.0 A1,0461,351
ID15H403-EID15H403-W
415 2.2 5.0 10 1.5 4.0 8.0 A1,2231,575
ID15H405-EID15H405-W
415 3.7 8.0 16 2.2 5.0 10 A1,4071,820
ID15H407-EID15H407-W
415 5.5 11 22 3.7 8.0 16 A1,9112,464
ID15H410-EID15H410-W
415 7.5 14 28 5.5 11 22 B2,6863,460
ID15H415-EID15H415-W
415 11 21 42 7.5 14 28 B3,3414,495
ID15H450-EO 415 37.2 65 115 29.8 55 92 D 7,230
ID15H460-EO 415 45 80 140 37.2 65 122 D 11,947
ID15H475-EO 415 56 100 200 44.7 80 160 E 13,442
ID15H4100-EO 415 75 125 220 56 100 183 E 15,422
ID15H4150V-EO 415 112 180 300 75 125 240 E 17,453
ID15H4150-EO 415 112 190 380 112 150 260 F 22,568
ID15H4200-EO 415 150 250 500 150 190 380 F 28,285
ID15H4250-EO 415 187 310 620 187 250 500 F 34,227
ID15H4300-EO 415 224 370 630 – – – G 43,269
ID15H4350-EO 415 261 420 720 – – – G 50,851
ID15H4400-EO 415 298 480 820 – – – G 56,568
ID15H4450-EO 415 336 540 920 – – – G 66,037
* These ratings also suitable for 230Vac/1 phase input to produce 3 phase/230Vac output. Drives marked ‡ must be derated for single phase input by 40%.BRAKING: Catalogue Number Suffix -E denotes that this drive has built-in regenerative braking transistor circuitry and resistor for a braking torque of up to 100% of motor torque for 6 seconds (based on a 20% duty cycle). Terminals to accept additional ‘RGA’ external resistors for increased braking torque are also fitted. Catalogue Number Suffix -EO denotes that braking transistor and resistors are NOT included. Optional ‘RTA’ Braking Transistor assemblies and ‘RGA’ Braking Resistors or ‘RBA combination kits are required to provide Dynamic Braking. Catalogue Number Suffix -W denotes Wash-Down Duty drive.
Cabinet Size Code
‘Harmonised Drives’ Cabinet Dimensions mm Shipping
Weight Aprx.kgOutside Mounting
Height Width Depth Height WidthA 305 196 180 292 183 9B 391 254 180 371 234 13.6D 635 369 259 616 343 41
Cabinet Size Code
‘Harmonised Drives’ Cabinet Dimensions mm Shipping
Weight Aprx.kgOutside Mounting
Height Width Depth Height WidthE 762 450 305 742 410 91F 1143 686 330 1118 578 168G 2362 800 600 Floor Mount 318
IP23 ENCLOSURE DIMENSIONS - SERIES H DRIVES
311300 BALDOR ✆ 1300 225 367
ac Inverter/Flux Vector Drives
Series ‘ZD18H’ ac Flux Vector Drives ➤ Harmonised ➤ Quiet Drive™ ➤ Multi-Rated
VectorDriveCatalogueNumber
Standard 2.5kHz PWM Frequency Mode Quiet Drive™ 8kHz PWM Frequency Mode CabinetSizeCode
(see page 30)
ListPrice
$(xE1)
Constant Torque Constant Torque
Controller RatedkW
Output Continuous
amps
Output Peakamps
Controller RatedkW
Output Continuous
amps
Output Peakamps
ZD18H401-E 0.75 2.0 4.0 0.56 1.5 3.0 A 1,390
ZD18H402-E 1.5 4.0 8.0 0.75 2.0 4.0 A 1,558
ZD18H403-E 2.2 5.0 10 1.5 4.0 8.0 A 1,795
ZD18H405-E 3.7 8.0 16 2.2 5.0 10 A 2,006
ZD18H407-E 5.5 11 22 3.7 8.0 16 A 2,681
ZD18H410-E 7.5 14 28 5.5 11 22 B 3,766
ZD18H415-E 11 21 42 7.5 14 28 B 4,607
ZD18H450-EO 37 65 115 30 55 92 D 11,488
ZD18H460-EO 45 80 140 37 65 122 D 13,765
ZD18H475-EO 56 100 200 45 80 160 E 15,380
ZD18H4100-EO 75 125 220 56 100 183 E 18,702
ZD18H4150V-EO 112 180 300 75 125 240 E 21,501
ZD18H4150-EO 112 190 380 93 150 260 F 27,302
ZD18H4200-EO 150 250 500 112 190 380 F 33,786
ZD18H4250-EO 187 310 620 149 250 500 F 41,456
ZD18H4300-EO 224 370 630 187 – – G 52,496
ZD18H4350-EO 261 420 720 224 – – G 61,046
ZD18H4400-EO 298 480 820 261 – – G 67,540
ZD18H4450-EO 336 540 920 298 – – G 79,662
Expansion Board Description BoardGroup
CatalogueNº
List Price $(xE8)
Isolated Input Board. 1 EXB003A04 220Isolated Input Board. 1 EXB003A05 220Four Output Relays/3 – 15 psi Pneumatic Interface. 2 EXB004A01 387Master Pulse Reference/Isolated Pulse Follower. 1 EXB005A01 328dc Tachometer Interface 1 EXB006A01 405High Resolution Analogue Board. 2 EXB007A02 566Isolated Encoder Feedback Board. 1 EXB008A01 566Resolver to Digital Interface. 1 EXB009A01 566Two analogue output/three relay output Board. 2 EXB010A01 345RS232 and RS485 High Speed Communication Board. 2 EXB012A01 220DeviceNet Expansion Board. 2 EXB013A01 583Profibus DP Expansion Board. 2 EXB014A01 701Modbus Plus Expansion Board. 2 EXB015A01 839
Description Harmonised Drive
Lengthmetres
CatalogueNº
Approx Wtkg
List Price$(xE8)
Encoder to Controller Connection Cable Assemblies with MS Connector Mating Plugs. For convenient connection of encoder assembly to harmonised controller. The twisted, shielded cable provides additional ‘noise’ protection. Strongly recommended for Flux Vector Drive applications.
18H/20H/22H 1.5 CBL015ZD-2 0.9 14318H/20H/22H 3.0 CBL030ZD-2 1.1 16018H/20H/22H 4.6 CBL046ZD-2 1.3 18918H/20H/22H 6.1 CBL061ZD-2 1.8 20618H/20H/22H 9.1 CBL091ZD-2 2.2 26118H/20H/22H 15.2 CBL152ZD-2 2.7 33918H/20H/22H 22.9 CBL229ZD-2 3.1 45018H/20H/22H 30.5 CBL305ZD-2 3.6 56118H/20H/22H 38.1 CBL379ZD-2 5.4 71018H/20H/22H 45.7 CBL455ZD-2 6.3 77218H/20H/22H 61 CBL606ZD-2 7.3 1,061
Remote Keypad to Controller Connection Cable Assemblies with Mating Plugs. For convenient connection between a harmonised controller and the removable keypad for remote keypad operation.
All H1 1.5 CBLH015KP – 71All H1 3.0 CBLH030KP – 101All H1 4.6 CBLH046KP – 129All H1 6.1 CBLH061KP – 216All H1 9.1 CBLH091KP – 350All H1 15.2 CBLH152KP – 437All H1 22.9 CBLH229KP – 482All H1 30.5 CBLH305KP – 597
Accessories for Series ‘H’ Drives➤ Expansion boards allow the drive to be interfaced with various inputs/outputs and external networks. Each control has the capability to
utilise up to two expansion boards mounted directly in the controller.When using one expansion board, either a Group 1 or 2 board will connect by a connector on the side of the board. When using more than one expansion board, the board from Group 1 connects to the control. A Group 2 board connects to a stacking connector on top of the Group 1 board. When two expansion boards are used, one must be from Group 1 and one from Group 2.
➤ Encoder feedback provides true servo performance with speed regulation to 0.001%, 1 msec torque reversal, high starting torque and ultra smooth low speed performance down to zero rpm.
➤ No brush wear and maintenance problems.➤ Lower inertia for fast accelerations and cycle time.➤ Full torque at speeds down to zero rpm.➤ Speed regulation not dependent upon slip and
load. Unlimited starts and stops. ➤ Excellent dynamic response.➤ Multi-Rated giving a choice of 4 operating modes.➤ IGBT power technology for quiet operation, and
intelligent power modules on most sizes.➤ Full digital speed or torque control for drift-free
operation.➤ Fifteen user programmable speed settings.➤ Auto-tuning function with manual override for easy
set-up.➤ Rugged IP23 (NEMA 1) enclosure with removable
remote mountable IP65 (NEMA 4X) operator keypad/display panel.
➤ English text information provided by a built-in 32 character, backlit LCD display for user friendly programming and operation.
➤ Keypad with sure-touch tactile feel membrane keys for easy entering of motor data and adjustment of drive operation.
➤ Programmable linear or ‘S’ curve acceleration and deceleration ramps to 3600 seconds.
➤ Process Control – built-in PID controller.➤ Process following via various methods
Catalogue numbers with suffix -E have built-in regenerative braking circuitry and resistor for a braking torque of 100% of motor torque for 6 seconds (based on a 20% duty cycle), and have terminals to accept additional ‘RGA’ external resistors for increased braking torque.Catalogue numbers with suffix -EO require optional ‘RTA’ external braking transistor kits and ‘RGA’ external braking resistor kits (or ‘RBA’ combination kits) to provide dynamic braking torque. (See page 33).
32 1300 BALDOR ✆ 1300 225 367
Accessories H2 Drives
Connection Cables for H2 Drives➤ To provide quick, simple and trouble-
free connection of controller to remote keypad or to encoder.
Description Harmonised Drive
Lengthmetres
CatalogueNº
Approx Wtkg
List Price(xE8)
Encoder to Controller Connection Cable Assemblies with MS Connector Mating Plugs. For convenient connection of encoder assembly to harmonised controller. The twisted, shielded cable provides additional ‘noise’ protection. Strongly recommended for Flux Vector Drive applications. All H2
Drives
1.5 CBL015ZD-2 0.9 1433.0 CBL030ZD-2 1.1 1604.6 CBL046ZD-2 1.3 1896.1 CBL061ZD-2 1.8 2069.1 CBL091ZD-2 2.2 261
15.2 CBL152ZD-2 2.7 33922.9 CBL229ZD-2 3.1 45030.5 CBL305ZD-2 3.6 56138.1 CBL379ZD-2 5.4 71045.7 CBL455ZD-2 6.3 77261 CBL606ZD-2 7.3 1061
Remote Keypad to Controller Connection Cable Assemblies with Mating Plugs. For convenient connection between a harmonised controller and the removable keypad for remote keypad operation.NOTE: For H2 Models ONLY
All H2 Drives
1.5 CBLHH015KP 423.0 CBLHH030KP 614.6 CBLHH046KP 796.1 CBLHH061KP 989.1 CBLHH091KP 115
15.2 CBLHH152KP 16322.9 CBLHH229KP 23630.5 CBLHH305KP 30845.7 CBLHH457KP 46161 CBLHH610KP 589
EMC/EMI Filters➤ Used to suppress electronic interference
caused by ac and dc motor speed controls.
➤ Most speed controls utilise SCR's or IGBT’s that switch rapidly causing high frequency interference pulses.
EMC/EMI Filter Description Rated Amps
Dimensionsmm
Weightkg
CatalogueNº
ListPrice
Group
Input 1 phase - 240Vac - 50/60Hz Designed for use with SCR/IGBT driven equipment including all ‘CE’ rated KB motor speed controls. When installed in accordance with manufacturers instructions the motor speed control will comply with ‘CE’ 89/336/EEC relating to EMC.
24 52x 93x37 0.3 KBRF-200A① 60 KX16 58x135x45 0.4 KBRF-300 133 KX10 145x119x29 0.3 KBRF-250①③ 117 KX3 85x54x40 0.27 FI0014A00 78 E86 114x58x46 0.45 FI0015A00 83 E810 156x58x46 0.73 FI0015A01 125 E812 156x58x46 0.73 FI0015A02 158 E8
Input 3 phase - �480Vac - 50/60Hz. State-of-the-art industrial drive EMI/EMC filtering. Meet Standards EN-555011/55014, IEC-22G/21/CDV, UL1283 and EN-133200. Designed for cable lengths up to 50m and performance may be adequate for cable lengths up to 75m or more.
7 190x70x40 0.5 FI0018A00 175 E830 270x85x50 1.2 FI0018A01 294 E836 200x150x75 3 FI0017A03 498 E850 200x150x75 3.1 FI0017A04 525 E855 250x90x85 1.8 FN3258-55-52 POA E875 270x135x80 3.2 FN3258-75-52 POA E8
100 270x150x90 4.3 FN3258-100-35 POA E8130 270x150x90 4.5 FN3258-130-35 POA E8
① = Class ‘A’ industrial filter.③ = Mounts directly to the heatsink of KBVF for compact installation.
Expansion Boards for H2 Drives➤ Baldor H2 drives offer a wide variety
of plug-in expansion boards to allow controls to be interfaced with various inputs and outputs.
➤ One, two or three expansion boards may be mounted into the control to custom tailor the inputs, outputs, and feedback requirements to the application. Baldor also offers several expansion boards that allow direct interfacing with popular PLC’s.
Expansion Board Description Catalogue Nº List Price $(xE8)
Web Server board. This expansion board allows connection with the Ethernet, using a standard web browser, giving the operator point and click setup and monitoring of all Baldor H2 drives.
EXBHH001A01 143
MINT Programming board *EXBHH002A01 651
115V Isolated Input Expansion Board. This board replaces the opto inputs on the main control board with isolated inputs.
EXBHH003A01 185
Hi-Resolution Analog I/O board. Contains two high resolution inputs to be used as additional analog sources to the control. Also contains two high resolution analog outputs in addition the 2 outputs already on the control board
EXBHH005A01 288
Pulse Follower board. This board is software selectable to create a master pulse reference based on the control’s speed/direction command or can be selected as an isolated pulse follower
EXBHH007A01 471
Ethernet communications board *EXBHH012A01 479
Devicenet expansion board *EXBHH013A01 487
Profibus DP expansion board *EXBHH014A01 586
Lonworks communications board *EXBHH016A01 479*Under development
331300 BALDOR ✆ 1300 225 367
Accessories H & H2 Drives
To provide maximum life and allow for unanticipated loads, select resistors rated at 1.25 times the calculated regenerative watts.
3 6 12 25 50 75 100 150 Max
0
3%
25%
50%
Base Speed
Max Speed
Braking Torque – % of Motor Torque Rating
With OptionalBraking Resistors
Without OptionalBraking Resistors
Speed
0
MAX
0
Tr
CYCLE TIME
REGEN TIME
Sr
SPEED
TORQUE
Braking Characteristics of ‘H & H2’ ac DrivesThe graph to the right shows the available braking characteristics of controllers with and without optional resistors. The controller limits the amount of braking torque to avoid tripout due to excess regenerated energy. This limits the deceleration torque available without the optional braking resistors. Use the formula below to determine the required braking resistor kit size where standard braking is insufficient.
Sizing ‘RGA’ & ‘RTA’ Braking Resistor Kit for Repetitive Acceleration/Deceleration CycleSr = Maximum Speed Regenerative (RPM)Tr = Regeneration Torque (Nm)
Dr =
Wr = Regenerated Watts = (0.0524) x (Tr) x (Sr) x (Dr) with Tr in Nm
Regen TimeCycle Time
Dynamic Braking Kit Selection➤ For drives up to 18.5kW (suffix -E or -W),
calculate the required ‘Resistor Continuous Watts’ using the formula given, then select the ‘RGA’ kit with the required ‘Continuous Rated Watts’ from the appropriate line in the ‘RGA’ table.
➤ Two alternatives are available for drives which have no internal resistor (suffix -EO).
➤ 1). Determine the maximum braking torque required (as a % of motor torque rating). Then select the ‘RBA’ (combination transistor/resistor kit) with adequate Maximum Braking Torque from the ‘RBA’ table.
➤ 2). Calculate the required ‘Resistor Continuous Watts’ using the formula given. Then select the ‘RGA’ kit with the required ‘Continuous Rated Watts’ from the appropriate line in the ‘RGA’ table. Then select the appropriate ‘RTA’ transistor assembly with matching minimum ohms from the ‘RTA’ table.
‘RGA’ Dynamic Braking Resistor Assemblies➤ 415V Braking Resistor Assemblies in an
IP23 Screened Enclosure.➤ For use with suffix -E and -EO Drives
and in conjunction with ‘RTA’ Transistor Assemblies.
H2 DriveRating
kW
ControlInputVac
TotalOhms
‘RGA’ Braking Assemblies in IP23 (NEMA 1) EnclosureRated600W
Rated1200W
Rated2400W
Rated4800W
Rated6400W
Rated9600W
Rated14200W
.075 – 2.2 415 120 RGA6120 RGA12120 RGA24120 – – – –3.7 – 7.5 415 60 RGA660 RGA1260 RGA2460 RGA4860 – – –
7.5* 415 30 RGA630 RGA1230 RGA2430 RGA4830 – – –11 – 18.5 415 20 RGA620 RGA1220 RGA2420 RGA4820 – – –
22.5 – 45.0 415 10 – RGA1210 RGA2410 RGA4810 – – –56 – 187 415 4 – RGA1204 RGA2404 RGA4804 RGA6404 RGA9604 RGA14204225 – 340 415 2 – – RGA2402 RGA4802 RGA6402 RGA9602 RGA14202
List Price $ (xE8) 528 799 1,224 1,985 5,006 8,340 11,477* Resistors in this line are to be used for 7.5kW H drives only (Not for H2 series drives).For Braking Accessories to suit 240Vac models please contact Australian Baldor.
‘RTA’ Dynamic Braking Transistor Assemblies➤ 415V Braking Transistor Assemblies in IP23 Screened Enclosure. For use with Type -EO Drives and in conjunction with ‘RGA’ Resistor Assemblies. Calculate the required ‘Resistor Continuous Watts’ using the formula given. Then select the ‘RGA’ kit with the required ‘Continuous Rated Watts’ from the appropriate line in the ‘RGA’ table. Then select the appropriate ‘RTA’ transistor assembly with matching minimum ohms from the ‘RTA’ table.
Motor Rating kW Min.Ohms�
Cat.Nº
ListPrice(xE8)
11 15 18.5 22 30 37 45 56 75 115'v' 115 150 187 228 266 300 340Maximum Braking Torque in % of Motor Torque Rating
150% 150% 150% 120% 90% 72% 60% 48% 36% 28% – – – – – – – 20 RTA4-20 1,136150% 150% 150% 150% 150% 150% 150% 96% 72% 56% 48% 36% 29% – – – – 10 RTA4-10 1,611150% 150% 150% 150% 150% 150% 150% 150% 150% 150% 126% 95% 76% 62% 54% 47% 41% 4 RTA4-4 2,122150% 150% 150% 150% 150% 150% 150% 150% 150% 150% 150% 150% 150% 125% 108% 94% 84% 2 RTA4-2 3,147
Thermal protection is provided by the controller software. The user must set the controller parameters to match the selected braking assembly to allow braking.
‘RBA’ Dynamic Braking Transistor/Resistor Assemblies➤ 415V Combination Assemblies to suit Type -EO Drives. Braking Transistor and Resistors in IP23 Screened Enclosure.Determine the maximum braking torque required (as a % of motor torque rating). Then select the ‘RBA’ assembly with adequate Maximum Braking Torque from the table.
Motor Rating kW Cont. Watts W
Cat.Nº
ListPrice(xE8)
11 15 18.5 22 30 37 45 56 75 115'v' 115 150 187 228 266 300 340Maximum Braking Torque in % of Motor Torque Rating
150% 150% 150% 120% 90 72% 60 48 36 28 – – – 600 RBA4-620 1,161150% 150% 150% 150% 90 72% 60 48 36 28 – – – 1800 RBA4-1820 1,773150% 150% 150% 150% 150 150% 150 96 72 56 48 36 29 4000 RBA4-4010 2,584
34 1300 BALDOR ✆ 1300 225 367
Vector & Inverter Drive Motors
Advantages of ac motors in variable speed applications include…➤ Lower initial cost compared to dc motors.➤ Less maintenance because there are no brushes to
replace, or commutator to resurface.➤ Totally enclosed, high efficiency ac motors run
cooler and stay cleaner inside, providing longer life expectancy than dc motors.
➤ ac motors are more versatile. They can be installed in environments where dc motors are not suitable, and indoors or outdoors without special housings to prevent water entry.
➤ ac motors are in IEC dimensions, enabling easy mechanical interchange, usually off-the-shelf.
➤ Where access to the motor is limited or non-existent, or where routine maintenance required for dc motors is not feasible, ac motors are an ideal solution.
➤ Low rotor inertia delivers quicker acceleration and deceleration than dc motors.
➤ For adjustable speed applications requiring either variable or constant torque from low to base speed, an inverter drive is often the best solution.
➤ For adjustable speed applications requiring full torque from zero to base speed, the vector drive motors are equipped with an encoder that provides the feedback necessary to interface with the vector drive.
Features of Baldor Inverter and Vector Drive Motors➤ IP54 enclosure.➤ Wound with Inverter Spike Resistant™ (ISR)
wire, which is up to 100 times more resistant to transient spikes, high frequencies, and short rise time pulses commonly produced by inverters.
➤ Premium energy efficient design utilising Class H insulation systems reducing cost of operation and increasing motor life.
➤ Thermostats are provided between phases in the windings. Thermostats open at elevated temperatures prewarning approach to temperature limits.
➤ For vector drive applications a 5-15Vdc, 1024 line encoder is standard for providing feedback information. The encoder is provided with an outer protective cover and leads are connected to an M.S. plug. For inverter drive applications no
encoder is required.➤ The encoder is electrically isolated from the motor.
This assures accurate data transmission by reducing the electrical noise being generated onto the feedback circuit.
➤ TEBC (Totally Enclosed Blower Cooled) motors (Cat-#-ZDMM) are designed for use indoors or outdoors in environments where humidity, dirt, lint or other contaminants may be present.
➤ A constant velocity fan on TEBC motors provides optimum motor cooling at all motor speeds. The fan motor leads are brought out through a standard half inch conduit nipple located on the fan housing.
➤ TENV (Totally Enclosed Non Ventilated) motors are rated for operation without a cooling fan. Cat-#-ZDNMM.
➤ Cast iron construction ensures high durability in arduous industrial applications.
0
50
100
150
200
36003200280024002000160012008004000SPEED (RPM)
TO
RQ
UE
(%
)
4-POLE INVERTER/VECTOR DRIVE MOTORSPEED/TORQUE CURVE
CONSTANT TORQUE150%
125%
100%
75%
50%
BASE SPEED
INVERTER DRIVEMOTOR
VECTOR DRIVEMOTOR
CONSTANT POWER
ACTUAL PERFORMANCE MAY VARY DEPENDING ON MOTOR SELECTION
Flux Vector Drive & Inverter Drive ac Motors➤ With the advent of inverter and flux
vector drives, ac voltage and current are now as controllable as dc. Although standard ac motors can be used with inverters, to ensure optimum performance and long life, and for vector drives, Baldor has produced a range of ac motors specifically designed for use with electronic speed control systems. The result is the ability to retain all the advantages of ac motors in variable speed applications.
MotorkW
Synchronous/Max.rpm
Ratedamps
Inertiakg cm2
IECFrame
MountingStyle
Weightkg
BaldorType No.
CatalogueNumber
List Price$(xE2)
0.75 1500/6000 1.7 72 D80-B5 D90-B3 Foot 29 0528M ZDNMM3581 1,279
1.5 1500/6000 3.0 110 D90-B5 D112-B3 Foot 48 0628M ZDNMM3669 1,519
2.2 1500/6000 4.7 169 D100-B5 D112-B3 Foot 53 0640M ZDNMM3661 1,711
3.7 1500/6000 7.1 156 112M B3 Foot 62 0640M ZDMM3665 2,514
3.7 1500/6000 7.1 156 112D B5 Flange 65 0640M ZDMM3665D 2,514
5.5 1500/6000 11.4 308 132M B3 Foot 92 0738M ZDMM3770 2,601
5.5 1500/6000 11.4 308 132D B5 Flange 96 0735M ZDMM3770D 2,601
7.5 1500/6000 14.4 440 132M B3 Foot 98 0750M ZDMM3774 2,698
7.5 1500/6000 14.4 440 132D B5 Flange 102 0750M ZDMM3774D 2,698
11.0 1500/5000 21.0 885 160M B3 Foot 127 0948M ZDMM2333 3,058
11.0 1500/5000 21.0 969 160D B5 Flange 133 0948M ZDMM2333D 3,058
15.0 1500/5000 27.0 969 160L B3 Foot 141 0952M ZDMM2334 3,507
15.0 1500/5000 27.0 969 160D B5 Flange 142 0952M ZDMM2334D 3,507
18.5 1500/4000 33.5 1879 180M B3 Foot 187 1056M ZDMM4103 3,818
22.5 1500/4000 41.0 1955 180L B3 Foot 216 1058M ZDMM4104 4,561
30.0 1500/4000 53.0 3285 200L B3 Foot 250 1258M ZDMM4110 5,816
37.0 1500/4000 67.0 4591 225S B3 Foot 306 1458M ZDMM4115 6,415
45.0 1500/4000 78.0 4888 225M B3 Foot 362 1462M ZDMM4314 8,358
56.0 1500/4000 101 8546 250S B3 Foot 465 1660M ZDMM4316 9,086
75.0 1500/3000 128 11399 250M B3 Foot 537 1680M ZDMM4400 13,393
ISR™ TECHNOLOGYInverter Spike Resistant Wire™
351300 BALDOR ✆ 1300 225 367
What is a Line Regenerative Drive?
Whenever a motor is slowed more rapidly than if it were coasting to a stop, it becomes a generator.
The energy or power generated by the motor may be dissipated as heat through a dynamic braking resistor, or alternatively with the correct technology, it can be returned into the incoming power line.
Baldor controls which deliver the regenerated power to a dynamic braking resistor include the Series ‘15H’ Inverter and the Series ‘18H’ Vector Controls.
Now Baldor has introduced two new series of controls which return the power generated during motor braking back into the incoming line.
The Series ‘21H’ Line Regenerative Inverter Control and the Series ‘22H’ Line Regenerative Vector Control.
Which control is best for your application?
In applications where the motor can be allowed to coast to a stop, Series ‘15H’ Inverter and ‘18H’ Vector Controls with no braking options are generally used. When limited braking is required, external dynamic braking options may be added to these standard controls.
There are many applications however where a Series ‘21H’ Line Regenerative Inverter or Series ‘22H’ Line Regenerative Vector Control would be the better choice.
These include: ➤ Applications where reduced energy consumption or
reduction of demand charge penalties is important.➤ Applications which have a large percentage of the
total cycle time devoted to braking the motor/load.
➤ Applications having an overhauling load➤ Applications which must comply with IEEE–519
which specifies a limit on harmonic voltage and current waveform distortion, including those where the motor can coast to a stop.
➤ Typical applications include Winding/Unwinding Stands, Downhill Conveyors, High Volume Air Conditioning, Test Stands, Press/Cyclic Loads, Hoists and Cranes.
What is IEEE–519?IEEE Standard 519-1992 is titled ‘IEEE
Recommended Practices and Requirements for Harmonic Control in Electric Power Systems’. This is a recommendation on limits of harmonic current drawn from and fed into utility power lines by customers. It is being adopted by more and more power utilities in response to line harmonic problems they and their customers have experienced.
How will IEEE-519 affect you?Utility customers who use equipment
that produces harmonic currents and
Line Regenerative ac Drives
Comparison of Line Current Waveforms and Harmonic Spectra of Diode Bridge ac Control and PWM Transistor Bridge ac Control
subsequent harmonic voltage waveforms will eventually be required to reduce the level of waveform distortion to recommended levels. This can be done by using compliant equipment or by installing additional devices that decrease the harmonics contribution of existing or new equipment which currently exceeds the recommended levels.
Baldor Series ‘21H’ Line Regenerative Inverters and Series ‘22H’ Vector Controls are IEEE 519 compliant for total harmonic voltage and current distortion at rated load. They eliminate any need for expensive harmonic filtering to meet IEEE–519 recommendations.
Line Regenerative ac Inverter Drives & ac Flux Vector DrivesBaldor Series ‘ID21H’ ac Inverter Drives and Series ‘ZD22H’ ac Flux Vector Drives comply with IEEE Standard 519-1992 for reduced Total Harmonic Voltage and Current Distortion at Rated Load
36 1300 BALDOR ✆ 1300 225 367
Line Reactors for ac Drives
Used on Power Input Side of Motor Controllers➤ Line reactors protect the motor control from voltage
surges (spikes) and noise from the incoming power source. Some motor controls may require a minimum amount of power line impedance to protect the motor control from short circuit currents and to provide smoothing of the power waveform if the short circuit capability of the power line is many times greater than the continuous current rating of the motor control. The reactors also protect other electronic equipment from electrical noise (harmonics) that may be created by the motor control. In most cases the line reactor should be p laced as close to the motor control as possible.
Used on Power Input Side of Multiple Motor Controllers➤ When connecting several motor controls to a
common power source one line reactor per motor
control should be considered. The reactors should be connected between the power source and each motor control for optimum protection of the motor controls and minimal noise to the power source. The separate line reactors will also provide filtering between the motor controls and help eliminate crosstalk.
Used between Motor Controller and Motor➤ When used between a motor and motor control
line reactors serve several useful functions such as protecting the motor control from a short circuit at the motor and limits the rate of rise of motor surge currents. More importantly on newer motor controls utilising fast turn on power devices, line reactors slow down the rate of rise of the power supplied to the motor end improves the continuity of the waveform supplied to the motor.
Line Reactors➤ Quality Baldor Line Reactors to protect
Drive Controllers from voltage spikes and to protect electrical equipment from harmonic problems.
➤ Three phase 50Hz input.➤ 4% Impedance.➤ Other sizes available on request
A typical 3 Phase Line Reactor
DrivekW
Input VoltsVac
Cont.Amps
Inductancemh
Full Load LossWatts
Apprx Wtkg
CatalogueNº
List Price$(xE8)
0.75 400/415 2 20.0 11.3 1.8 LRAC00202 1201.5 400/415 4 9.0 20 2.3 LRAC00403 1882.2 380/400/415 8 5.0 25.3 5.0 LRAC00803 2123.7 380/400/415 8 3.0 29 3.6 LRAC00802 1795.5 380/400/415 12 2.5 31 4.5 LRAC01202 2237.5 380/400/415 18 1.5 43 5.4 LRAC01802 23111 380/400/415 25 1.2 52 6.4 LRAC02502 27915 380/400/415 35 0.8 54 7.3 LRAC03502 298
18.5 380/400/415 45 0.7 62 12.7 LRAC04502 40522.5 380/400/415 45 0.7 62 12.7 LRAC04502 40530 400/415 55 0.401 113 10.9 LRAC05502 33137 380/400/415 80 0.276 129 15 LRAC08002 38745 400/415 80 0.276 129 15 LRAC08002 38756 380/400/415 110 0.2 152 22 LRAC110ACB2 44575 400/415 130 0.17 148 22.7 LRAC130ACB2 70893 380/400/415 200 0.11 222 39 LRAC200ACB 1,017149 415 250 0.088 261 41.4 LRAC250ACB2 1,258187 380/400/415 360 0.061 380 44.5 LRAC360ACB2 1,423224 380/400/415 420 0.053 400 45.5 LRAC420ACB2 1,515298 415 480 0.046 392 50 LRAC480ACB2 2,309
NOTE: We reserve the right not to sell individual line reactors if they are not utilised with Baldor drives.
By improving the continuity or smoothness of the power waveform supplied to the motor, the motor has extra insurance against premature failure due to turn to turn winding failures. In most cases the line reactor should be placed as close to the motor control as possible.
Used between Motor Controller and Multiple Motors➤ When one motor control is operating multiple
motors, a single line reactor can typically be used between the motors and the motor control. The single reactor should be sized to provide the total current draw of all the motors connected to the motor control. For maximum protection of the motor windings, one reactor per motor should be considered in shared controller applications. The use of individual reactors will more closely match the motor load and minimise motor operating temperature and noise.
Shielded Cable & Inductors➤ Quality shielded cable for power and
encoder/hall sensor connection
Cable Description Current
Length (m) 1-49m 50-99m 100+
Catalogue No. List Price $(xE8) List Price $(xE8) List Price $(xE8)
Shielded Power Cable 12 Amps CBL050-501 22/m 19/m 18/mShielded Power Cable 20 Amps CBL051-501 27/m 23/m 22/mShielded Power Cable 35 Amps CBL052-501 36/m 30/m 29/m
Shielded Encoder/Hall Cable 16 core CBL043-501 16/m 14/m 13/m
InductorCatalogue No.
Inductance Current Weight List Price $(xE8)mH Amps kg
L040-12 0.4 12 0.58 50L040-20 0.4 20 1.33 105L020-40 0.2 40 2.3 114
NEW
371300 BALDOR ✆ 1300 225 367
Reducers & ac Motor Accessories
Size 1
Ratio Multiplier➤ NEMA 56C Mounting ➤ C-Face Output➤ C-Face Quill Input Shaft➤ Single Stage Parallel Shaft ➤ High Efficiency➤ 4 Ratios Available➤ Internal Compression Chamber Eliminates
Breather Vent➤ Shipped with Synthetic Oil
(MOBIL SHC634)➤ Cast Iron Construction➤ Combine with Right Angle
Units for High Ratios➤ Universal Mounting Positions➤ Higher Capacity & Other Input/Output
Combination available
Output rpm @1450rpm Input
GearRatio
Input PowerkW
Max. Output Torque
Nm
InputStyle
OutputStyle
Weightkg
TypeNumber
CatalogueNumber
Price$(xGB)
725 2:1 1.5 16 56C 56C 8.63 FX1-2-B5-56C GCF2X01AA 331
483 3:1 1.26 19.7 56C 56C 8.63 FX1-3-B5-56C GCF3X01AA 331
362 4:1 1.1 23.1 56C 56C 8.63 FX1-4-B5-56C GCF4X01AA 331
290 5:1 0.84 21.9 56C 56C 8.63 FX1-5-B5-56C GCF5X01AA 331
Encoder, Resolver & Blower Kits for ac Motors➤ These accessories provide for easy
adaption of standard ac motors for use in Flux Vector or Inverter Drive applications.
➤ Encoder and resolver kits are designed to be electrically isolated from the motor frame to minimise conducted noise.
Description For IEC Frames
Approxkg
CatalogueNº
List Price$(xE8)
Encoder and Resolver Kits.ENCMT = MOUNTING ADAPTOR ONLY. (no encoder supplied)ENC00NV/01BC/02BC include 1024 pulse/rev., 5–15V encoder.RES00NV/01BC/02BC include resolver.All above include M/S connector and all hardware required for mounting to nominated Baldor IEC frame ac motors. Components are included for complete electrical isolation, helping to eliminate potential ‘noise’. Simple mounting instructions included.
All 0.22 ENCMT 176All TENV 0.68 ENC00NV 1,16290 - 132 0.68 ENC01BC 1,162160 - 225 0.68 ENC02BC 1,162All TENV 0.9 ENC00NV-B1 92590 - 132 1.0 ENC01BC-B1 925160 - 225 1.0 ENC02BC-B2 925
TENV 0.68 RES00NV 1,026TEBC 0.68 RES01BC 1,026TEBC 0.68 RES02BC 1,026
Blower Kit, 415V, 3 phase, 50/60Hz.To convert TENV or TEFC ac motors to a Totally Enclosed Blower Ventilated (TEBV) configuration. This is advantageous in Inverter and Flux Vector Drive applications where continuous cooling is required, regardless of motor shaft speed. These kits are mounted on the rear of the motor after the fan cover and fan are removed. No shaft modifications are required on Baldor motors.
112 10.0 BLWM06-F 623132 11.3 BLWM07-F 650160 12.3 BLWM09-F 675180 14.5 BLWM10-F 722200 17.3 BLWM12-F 766225 20.5 BLWM14-F 824250 22.0 BLWM16-F 1,201280 25.0 BLWM18-F 1,617
LubricantsMobil Polyrex EM Grease ➤ High performance, long life polurea
grease for all Baldor motors.
Mobil SHC634 Bearing & Gear Oil ➤ High performance, long life
bearing and gear oil for all Baldor gearmotors.
➤ Lasts up to 6-8 times longer than mineral oils.
Catalogue Nº Description List Price $(xP1)
POLYREX-EM-400 400 gram cartridge of Polyrex EM grease 60
SHC634-1000 1 litre Mobil SHC634 oil in a 1 litre plastic bottle
75
37
SEE PAGE
37
SEE PAGE
SHC634-1000 Oil
NEW
38 1300 BALDOR ✆ 1300 225 367
Super-E™ ac Induction Motors
Improved efficiency results in less heat and lower operating temperatures, allowing the use of a smaller fan, further reducing windage losses and
lowering operating noise levels.
1
Optimised air gap results in lower current requirements and reduced stray load losses. 7 Advanced computer analysed core designs a
longer overall core length ensure high inductive performance, lower flux density, and increased cooling capacity, reducing both magnetic and load losses.
4Larger rotor bars and rings from premium grade aluminium or copper, reduce resistance, thereby lowering rotor load losses.
8
Premium Class ‘F’ or better insulation on all critical components. Lead Wire – cross linked polyethylene or glass-silicone. Slot Liner –
‘Nomex’ or dacron-mylar-dacron. Top Stick – ‘Nomex’ or dacron-mylar-dacron. Sleeving – glass weave, varnished.
10
Phase Insulation – ‘Nomex’ and dacron cord, laced and tied each end and every slot for maximum rigidity and electrical protection.
11
Thermistors standard on all motors 18.5kW
and larger.
15
All Baldor Super-E™ motors are wound using ISR™ wire
which is up to 100 times more resistant to transient spikes, high frequencies, and short rise time pulses produced by inverters. The result is a BETTER MOTOR … longer life, reduced downtime and better value.
14
An increased number of thinner, premium grade steel laminations reduces both magnetic and load losses. 12
Premium quality Copper Windings 10 TIMES MORE RESISTANT TO MOISTURE than commonly used 185°C wire. Moisture resistant 200°C copper wire with 6 coats of insulation varnish including
polyester and polyamideimide under coats, plus 100% polyester phenolic epoxy varnish, rated at 180°C, with low viscosity for good penetration into coils, and high bond strength to prevent wire movement.
13
New stator slot design with an increased number of slots improves both efficiency and power factor
3Larger cross section copper windings reduces resistance thus reducing stator load losses.6
An increased volume of copper, minimises operating temperature rise, reduces resistance, and reduces stator and load losses.
5Bearings meet ABEC-1 tolerances, regreasable through easily accessible
fittings. Grease reliefs fitted on housings on Frames 160 and larger. Packed with ‘Mobil Polyrex EM’, moisture resistant, high temperature grease. Bearings meet AFBMA Standards of corrosion resistance, and are designed to give ABEC-B10 life or 30,000 hours under rated conditions.
9
IP55 Enclosure. High strength and rigidity from cast iron body and end plates. All castings are primed in the foundry to ensure maximum
corrosion resistance. Chemically inert, corrosion resistant, non sparking fan, keyed to shaft. Lamination core pinned to stator frame. Forged steel lifting bolt, top centre. Terminal box with generous internal capacity and rotatable in 90° increments. Anti-condensation one-way drain plugs at the lowest point of motor housing.
2
Super-E™ Super-Efficient ac 3-Phase Induction Motors➤ Advanced design features exceeding IEC34-1 and NEMA MG-1 Standards, insulation to
Class ‘F’ or better, Class ‘B’ operating temperature rise at 40°C ambient, and a service factor of 1.15 mean conservative ratings for a long, cost efficient operating life. IP55 enclosure. 3 year warranty.
➤ High efficiency ratings, complying with MEPS 2006 High Efficiency standards.^
Baldor Super-E™ Motors comply with AS1359:2005*‘MEPS High Efficiency’Quality design and manufacture means that Baldor Super-E™ motors comply with the requirements for MEPS High Efficiency 2005, providing lower operating costs and environmental benefits. Higher efficiency means consuming less energy, alsoresulting in a reduction in pollution and greenhouse gas emissions.(^ A few motors comply with MEPS 2006 only)
1
2
4
73 6
85
13
12
10
9
11
14
391300 BALDOR ✆ 1300 225 367
Super-E™ ac Induction Motors
A motor, whose purchase price is low, but whoseenergy requirement is high, is not a cheap motor !!
MotorkW
Nominal rpm Frame IEC Type Nº *Catalogue Number Foot
MountAmps Full
Load
Efficiency IEC Power FactorWeight
kg
*Foot Mount List Price$(xS2)
Alternative Mounting
Full Load 75% 50% Full Load 75% 50% Cat.Prefix C$(xS2)
Cat.Prefix V$(xS2)
1.1 1450 90S 0528M EMM3584-57^ 2.28 84.4 85.4 84.5 0.78 0.70 0.56 26 439 485 4851.5 1450 90L 0535M EMM3587-57 2.9 85.7 87 86.7 0.83 0.77 0.63 28 431 539 5392.2 2850 100L 3628M EMM3660-57 3.8 87.3 88.5 88.2 0.96 0.95 0.9 30 4312.2 1450 100L 3628M EMM3661-57 4.3 88.4 88.8 87.9 0.8 0.74 0.62 31 554 581 5814 2900 112M 0640M EMM3663-58 9 89.9 90 88.7 0.91 0.87 0.78 46 554 6544 1450 112M 0643M EMM3665-58^ 8.1 88.2 89 88.4 0.81 0.74 0.61 47 528 654 6544 950 132M 0744M EMM3768-58 8.3 88.5 88.9 87.9 0.62 0.55 0.43 92 862
5.5 2900 132M 0729M EMM3769-58 9.7 89.5 89.8 88.8 0.89 0.85 0.77 75 8015.5 1460 132S 0740M EMM3770-58 10.1 91.8 91.6 90.2 0.72 0.64 0.51 81 801 877 8775.5 980 160L^ 0960M EMM2276-58 12.8 91 90.6 88.4 0.69 0.61 0.48 122 1,111 7.5 2900 132S 0738M EMM3771-58 13 90 91.1 91 0.92 0.9 0.84 90 8587.5 1460 132M 0750M EMM3774-58 15 90.8 91.3 90.7 0.78 0.73 0.61 89 858 943 9697.5 975 160M 0960M EMM2332-58 15.9 91.6 91.1 90.2 0.73 0.71 0.59 146 1,48411 2920 160M 0940M EMM2394-58 20 91.7 91.5 91.3 0.89 0.88 0.8 130 1,20311 1450 160M 0948M EMM2333-58 21.6 92.4 92.3 91.5 0.81 0.76 0.64 130 1,203 1,324 1,20711 980 180M^ 1062M EMM4100-58 21.4 92.8 93.5 93.1 0.78 0.73 0.61 206 1,841 15 2910 160L 0948M EMM4106-58 25 92.4 92.4 91.4 0.9 0.88 0.81 132 1,48815 1465 160L 0956M EMM2334-58 27.5 92.4 92.5 91.8 0.85 0.82 0.73 146 1,488 1,63015 975 180L 1068M EMM4102-58 31 92.6 92.9 92.2 0.77 0.7 0.58 201 2,449
18.5 2920 160L 0954M EMM4107-58 31 92.4 93.2 92.7 0.91 0.89 0.83 117 1,48818.5 1480 180M 1056M EMM4103-58^ 38 92.4 91.5 89.7 0.77 0.71 0.59 200 1,834 2,01818.5 975 200L 1260M EMM4111-58 36 93.1 93.5 93.2 0.8 0.77 0.67 269 2,87922 2930 180L 1052M EMM4108-58 37 93 92.7 91.9 0.91 0.9 0.86 198 2,16922 1470 180L 1058M EMM4104-58 44.5 93.2 93.6 93.2 0.81 0.75 0.65 213 2,449 2,35322 980 200L 1268M EMM4117-58 41 93.1 93.1 92.2 0.83 0.72 0.6 286 3,39430 2950 200L 1264M EMM4109-58 49 93.6 93.2 91.8 0.93 0.91 0.86 287 2,87930 1465 200L 1262M EMM4110-58 51.4 94.2 94 93.4 0.88 0.8 0.73 283 2,879 3,08330 980 225M 1474M EMM4308-58 55 94.1 94.4 94.1 0.81 0.77 0.68 384 4,97837 2940 200L 1272M EMM4114-58 60 93.6 93.8 93 0.92 0.9 0.85 322 3,80537 1465 225M 1272M EMM4115-58 63 94.2 94.5 94.1 0.91 0.85 0.78 320 3,805 3,96337 975 250S 1474M EMM4312-58 68 94.1 93.5 93.2 0.83 0.82 0.74 384 6,13845 2950 225M 1458M EMM4310-58 74 94.1 94.7 93.8 0.92 0.89 0.84 368 3,94045 1470 225M 1462M EMM4314-58 86 94.7 94.5 93.5 0.85 0.81 0.72 367 5,546 6,10145 985 250M 1680M EMM4403-58 79 94.5 94.8 94.8 0.86 0.83 0.74 545 7,62255 2960 250S 1660M EMM4313-58 91 94.5 94.5 93 0.9 0.89 0.82 500 6,13855 1480 250S 1682M EMM4316-58^ 91 94.3 93.8 92.6 0.89 0.86 0.77 535 5,685 6,25355 980 280S 1880M EMM4404-58 105 94.7 94.7 93.8 0.81 0.76 0.65 672 7,62275 2950 250M 1676M EMM4402-58 119 95.4 96 95.2 0.91 0.91 0.88 545 7,62275 1475 250M 1688M EMM4400-58 131 95 95.1 94.6 0.91 0.89 0.84 590 7,061 7,76775 980 280M 18100M EMM4409-58 132 95.4 95.4 94.7 0.83 0.78 0.68 764 9,00590 2965 280M 1856M EMM4412-58 149 95 95 94.4 0.92 0.91 0.85 579 10,28190 1480 280S 1872M EMM4410-58 159 95.5 95.3 94.4 0.86 0.81 0.72 690 9,528 10,48190 980 315S 18108M EMM5090-58 157 95 95.1 46.3 0.85 0.84 1.58 806 12,472
110 1485 280M 18112M EMM4406-58^ 188 95.4 95.3 94.4 0.86 0.84 0.77 845 11,161110 980 315M 20097M EMM44156-58^ 200 95.8 95.5 94.7 0.87 0.81 0.80 1724 15,985150 1480 315M 18136M EMM5150-58^ 253 95.8 95.8 94.9 0.88 0.85 0.8 919 13,721150 985 315L 18144M EMM44206-58‡ 268 94.5 94.0 94.0 0.87 0.85 0.78 1724 17,583187 1480 315M 18152M EMM5187-58^ 328 95.3 95.0 95.0 0.88 0.87 0.81 1800 14,812
Motors marked ^comply with MEPS 2006 Minimum Efficiency only.
* Alternative Mountings – Add prefix letter to Catalogue No. – e.g. EMM3774-58 becomes VEMM3774.58 – ‘V’ = Metric Flange Mounting – ‘C’ = Metric Flange & Foot Mountings.Catalogue N suffix -57 = Dual Voltage – 415V star/240V delta. Cat Nº........... -58 = WYE Start/Delta Run, 400V nominal voltage. ‡ Only available ex factory USA.
40 1300 BALDOR ✆ 1300 225 367
ac Induction Motors
Type ‘MM’B3 Foot Mount
IEC FrameFoot & Face MountEnergy Efficient 3 Phase ac Motors➤ B3/B14A Foot and Face Mount
(or *B3 Foot Mount only)➤ 0.18kW to 7.5kW ➤ 2, 4 or 6 Pole ➤ TEFC ➤ IP54 Enclosure ➤ IEC Metric Frame ➤ 415 Volt ➤ 50 Hz ➤ 3 Phase➤ Fully Reversible➤ Rolled Steel Stator Frame➤ Meet the requirements of AS1359,
including ‘MEPS Minimum Efficiency’
MotorkW
Ratedrpm
Full Loadamps
Full LoadEfficiency
%
ApproxWt. kgs
IECFrame
TypeNumber
CatalogueNumber
ListPrice
Group
2 Pole – B3/B14A Foot & Face Mount * B3 Foot Mount ONLY
0.18 2850 0.4 71.4 9 D63-B3/B14A 3324M MNM20252C-57 164 KM
0.25 2850 0.6 72 8.7 D63-B3/B14A 3320M MM3457C-57 173 KM
0.37 2850 0.8 76.1 9 D71-B3/B14A 3324M MM3460C-57 182 KM
0.56 2850 1.3 81.1 10.5 D71-B3/B14A 3332M MM3463C-57 182 KM
0.75 2850 1.9 80 11.4 D80-B3/B14A 3422M MM3545C-57 227 LM
1.1 2850 3.1 77 16 D90-B3/B14A 3524M MM3550C-57 242 LM
1.5 2850 3.1 80 19.6 D90-B3/B14A 3526M MM3555C-57 263 LM
2.2 2850 4.2 86 25 D90-B3/B14A 3542M MM3559C-57 300 LM
3 2850 4.8 84.9 34 D100-B3/B14A 3626M MM3610C-58 331 LM
4 2900 7 87.7 42 D100-B3/B14A 3640M MM3613C-58 394 LM
5.5 2850 11 88.8 54 D132-B3* 3728M MM3709-58 542 LM
7.5 2850 14 89.6 56.4 D132-B3* 3732M MM3711-58 585 LM
4 Pole – B3/B14A Foot & Face Mount * B3 Foot Mount ONLY
0.18 1425 0.7 9.1 D63-B3/B14A 3320M MM3454C-57 164 KM
0.25 1425 0.85 67 9.5 D71-B3/B14A 3320M MM3458C-57 173 KM
0.37 1425 1.2 72 10 D71-B3/B14A 3328M MM3461C-57 182 KM
0.56 1425 1.7 74 11.9 D80-B3/B14A 3420M MM3542C-57 199 KM
0.75 1425 2.2 81.5 14.6 D90-B3/D80-B14A 3520M MM3546C-57 227 LM
1.1 1425 2.7 82.5 16 D90-B3/B14A 3524M MM3554C-57 242 LM
1.5 1425 3.2 84 21.5 D90-B3/B14A 3535M MM3558C-57 263 LM
2.2 1425 4 85.5 29 D100-B3/B14A 3628M MM3611C-57 300 LM
3 1450 7.6 86.5 37 D100-B3/B14A 3638M MM3612C-58 331 LM
4 1425 7.2 87.5 37.1 D112-B3/B14A 3640M MM3615C-58 394 LM
5.5 1425 11.6 88.5 56 D132-B3* 3735M MM3710-58 542 LM
7.5 1450 14 90.2 61 D132-B3* 3744M MM3714-58 585 LM
6 Pole – B3/B14A Foot & Face Mount * B3 Foot Mount ONLY
0.25 950 1 70 11.4 D80-B3/B14A 3418M MM3535C-57 184 KM
0.37 940 1.4 72 15.5 D80-B3/B14A 3428M MM3539C-57 206 KM
0.56 950 1.7 77 15.5 D80-B3/B14A 3432M MM3543C-57 232 KM
0.75 940 2.3 74.6 17.8 D90-B3/B14A 3524M MM3556C-57 247 LM
1.1 950 2.8 76.8 35.5 D90-B3/B14A 3540M MM3557C-57 265 LM
1.5 950 3.2 87.8 37 D100-B3/B14A 3634M MM3614C-57 332 LM
2.2 950 5.3 82.2 44 D112-B3/B14A 3646M MM3604C-57 437 LM
3 950 8 90.1 65 D132-B3* 3732M MM3704-58 558 LM
4 950 9 90 72 D132-B3* 3736M MM3708-58 606 LM
411300 BALDOR ✆ 1300 225 367
ac Induction Motors
Type ‘VMM’B5 Flange Mount
IEC FrameFlange MountEnergy Efficient 3 Phase ac Motors➤ B5 Flange Mount➤ 0.18kW to 7.5kW ➤ 2, 4 or 6 Pole ➤ TEFC ➤ IP54 Enclosure ➤ IEC Metric Frame➤ 415 Volt ➤ 50 Hz ➤ 3 Phase➤ Fully Reversible➤ Rolled Steel Stator Frame➤ Meet the requirements of AS1359,
including ‘MEPS Minimum Efficiency’
MotorkW
Ratedrpm
Full Loadamps
Full LoadEfficiency %
ApproxWt. kgs
IECFrame
TypeNumber
CatalogueNumber
ListPrice
Group
2 Pole – B5 Flange Mount
0.18 2850 0.4 76.4 10.6 D63D 3324M VMNM20252-57 184 KM
0.25 2850 0.6 77 9.6 D63D 3320M VMM3457-57 193 KM
0.37 2850 0.8 79 10.9 D63D 3324M VMM3460-57 202 KM
0.56 2850 1.5 75.2 11.4 D71D 3413M VMM3463-57 221 KM
0.75 2850 1.8 80 13.2 D80D 3422M VMM3545-57 269 LM
1.1 2850 2.4 81 14.6 D80D 3424M VMM3550-57 288 LM
1.5 2850 2.9 82.6 22.2 D90D 3526M VMM3555-57 311 LM
2.2 2850 4.2 84 27.3 D90D 3542M VMM3559-57 349 LM
3 2850 5.4 85.5 34 D100D 3626M VMM3610-58 375 LM
4 2900 7 86.5 42.7 D112D 3640M VMM3613-58 447 LM
5.5 2850 10.2 87.5 54.5 D132D 3728M VMM3709-58 606 LM
7.5 2850 13.6 89.5 61.7 D132D 3738M VMM3711-58 651 LM
4 Pole – B5 Flange Mount
0.18 1425 0.7 71.5 9.3 D63D 3320M VMM3454-57 184 KM
0.25 1425 0.85 75.2 12.6 D71D 3324M VMM3458-57 193 KM
0.37 1425 1.2 74 11.2 D71D 3416M VMM3461-57 202 KM
0.56 1425 1.7 75 15.8 D80D 3513M VMM3542-57 221 KM
0.75 1425 1.7 81.5 17.7 D80D 3520M VMM3546-57 269 LM
1.1 1425 2.3 82.5 16.6 D90D 3524M VMM3554-57 288 LM
1.5 1425 3.3 85.5 25.9 D90D 3535M VMM3558-57 311 LM
2.2 1425 4.7 85.5 32.7 D100D 3628M VMM3611-57 349 LM
3 1450 6.4 86.5 40.4 D100D 3638M VMM3612-58 375 LM
4 1425 8.2 87.5 41.8 D112D 3640M VMM3615-58 447 LM
5.5 1425 12.4 88.5 56.3 D132D 3735M VMM3710-58 606 LM
7.5 1450 14.8 90.2 70.8 D132D 3746M VMM3714-58 651 LM
6 Pole – B5 Flange Mount
0.25 950 0.9 68 11.5 D71 3418M VMM3535-57 202 KM
0.37 940 1.1 77 15.5 D80 3428M VMM3539-57 243 KM
0.56 950 1.7 76 16.4 D80 3432M VMM3543-57 269 KM
0.75 940 2.2 77 17.7 D90 3524M VMM3556-57 283 LM
1.1 950 2.7 78.5 24.5 D90 3540M VMM3557-57 302 LM
1.5 950 3.9 80 30.9 D100 3628M VMM3614-57 380 LM
2.2 950 5.5 82 41.3 D112 3646M VMM3604-57 485 LM
3 950 6.9 85 52.5 D132 3732M VMM3704-58 631 LM
4 950 9.5 85 53.6 D132 3736M VMM3708-58 679 LM
42 1300 BALDOR ✆ 1300 225 367
ac Induction Motors
Single Phase NEMA Frame ac Motors➤ NEMA Foot Mount ➤ IP44➤ Strong Ribbed Pressure Cast Aluminium
End Plates ➤ Heavy Gauge Steel Housing ➤ Ball Bearings➤ Capacitor Start/Induction Run
Three Phase NEMA Frame ac Motors➤ NEMA C Face & Foot ➤ TEFC ➤ IP54 ➤ Strong Ribbed Pressure Cast Aluminium
End Plates ➤ Heavy Gauge Steel Housing➤ Ball Bearings
MotorkW
Ratedrpm
Power Input1ph/50Hz
Full Loadamps
NEMAFrame
BaldorType
Weightkg
CatalogueNº
List Price$(xK)
0.18 1425 240V 2.4 48 3414L 10 L3403-53 2620.25 1425 240V 2.8 56 3418L 11.4 L3501-53 2730.25 1425 110/220 6.4/3.2 56C 3418L 11.4 VL3501-50 2870.37 1425 240V 4.0 56 3424L 13.6 L3504-53 2890.37 2850 110/220 6.6/3.3 56C 3420L 11.4 VL3503-50 2600.37 1425 110/220 7.2/3.6 56C 3428L 14 VL3504-50 3030.37 1440 120/240V 8.0/4.0 56C 3424L 13.6 CL3504-51 3400.55 1425 240V 5.8 56 3524L 19 L3507-53 3270.55 1425 110/220 10.0/5.0 56C 3524L 20 VL3507-50 3300.75 1425 240V 6.0 56 3532L 19.5 L3510-53 3570.75 1440 120/240V 13.6/6.8 56C 3528L 20 CL3510-51 506
Catalogue Nº prefix : L = Foot Mount; VL = Face Mount; CL = Foot and Face Mount.Catalogue Nº suffix -50 = 110/220V, 50HZ. (Suitable for use on 60Hz).Catalogue Nº suffix -51 = 120/240V, 50Hz. (Suitable for use on 60Hz)Catalogue Nº suffix -53 = 240V, 50HZ, Service factor 1.0; F1 terminal box; Plastic terminal block
Polyamide 66, 10A, PA10 from Multicomp or equivalent.
Motor kW
Rated rpm
Full Loadamps
NEMA Frame
Baldor Type
Weight kg
Catalogue Number
List Price
Group
2 Pole0.37 2850 0.9 56C 3410M 9.1 CM3537-57 335 K0.75 2850 1.8 56C 3520M 14.5 CM3545-57 418 K0.75 2850 1.8 143TC 3520M 16.5 CM3545T-57 370 L-11.1 2850 2.5 145TC 3524M 19 CM3550T-57 398 L-11.5 2850 2.9 145TC 3532M 20.9 CM3555T-57 416 L-12.2 2850 4.2 145TC 3542M 29 CM3559T-57 569 L-13.7 2850 6.8 184TC 3632M 35 CM3613T-58 649 L-15.5 2850 10.2 213TC 3728M 43 CM3709T-58 941 L-17.5 2900 13.7 215TC 3738M 58 CM3711T-58 979 L-111 2950 20.8 254TC 0944M 121 CM2394T-58 1249 L-115 2910 25.0 256TC 0948M 130 CM4106T-58 1544 L-1
4 Pole0.37 1440 1.2 56C 3416M 10.5 CM3538-57 394 K0.56 1440 1.4 56C 3424M 12.7 CM3542-57 418 K0.75 1440 1.7 56C 3520M 15.5 CM3546-57 458 K0.75 1440 1.7 143TC 3520M 16.5 CM3546T-57 370 L-11.1 1440 2.5 145TC 3524M 19 CM3554T-57 398 L-11.5 1440 3.0 145TC 3535M 22 CM3558T-57 416 L-12.2 1440 4.7 182TC 3628M 33 CM3611T-57 609 L-13.7 1440 8.7 184TC 3640M 38 CM3615T-58 649 L-15.5 1460 11.4 213TC 0738M 78 CM3770T-58 941 L-15.5 1460 11.4 213T 0738M 78 *M3770T-58 801 L-17.5 1425 14.8 215TC 3746M 68 CM3714T-58 979 L-111 1460 21.0 254TC 0756M 115 CM2333T-58 1249 L-115 1460 27.0 256TC 0946M 134 CM2334T-58 1544 L-1
* Foot Mount OnlyCatalogue N suffix -57 = Dual Voltage – 415V star/240V delta. Catalogue Nº suffix -58 = WYE Start/Delta Run, 400V nominal voltage.
NEW
56C F
ace Ratio Multipliers
See Page 37
56C F
ace Ratio Multipliers
See Page 37
431300 BALDOR ✆ 1300 225 367
Single Phase IEC Frame ac Motors ➤ IEC Frame with Metric B5 Flange ➤ Cat. NºCLxxxxD also have Multipurpose
Foot Mount➤ TEFC ➤ IP44 ➤ Capacitor Start/Induction Run
Catalogue N suffix -54 = 230V nominal.
Type RHC Type CFC
➤ Applications include Condenser Fans, Heat Pumps, Refrigeration Units
➤ Designed for Continuous Air-Over Applications
➤ Shaft 6” Long x 1/2” Diameter with 2 Flats 90° apart, 30 Inch Leads, 60°C Ambient, 50 Hertz, Automatic Thermal Overload, Sealed Ball Bearings, Class B Insulation, 370 Volt Capacitor (not included), Extended Through-Bolts, Permanent Split Capacitor, Reversible Rotation, Shaft Slinger, 1.0 Service Factor
ac Induction Motors
Commercial Duty Fan & Blower Motors➤ 1 Phase➤ NEMA 56 Frame ➤ Open/Drip Proof➤ Resilient Base ➤ Ball Bearings➤ Applications include Fans for Heating,
Ventilation and Air Conditioning Blowers➤ Designed for Continuous Air-Over
Applications with Moderate Starting Loads
➤ Automatic Thermal Overload, Ball Bearings, Resilient Cushion Rings, Reversible Rotation, Rugged Steel Base, Terminal Panel with Quick Connections.
Condenser FanMotor➤ 1 Phase➤ NEMA 48YZ Frame ➤ Totally Enclosed Air Over➤ Sealed Ball Bearings
MotorkW
Ratedrpm
Power Input 1ph/50Hz
Full Load amps
NEMA Frame
BaldorType
Weight kg
CatalogueNº
ListPrice
Group
Commercial Duty Fan & Blower Motors0.55 1390 240V 4.2 56 1724C 12.7 RHC445A-54 230 C1
0.55 930 240V 4.6 56 1728C 14.1 RHC465A-54 232 C1
0.75 1390 240V 6.1 56 1728C 14 RHC545A-54 240 C1
Condenser Fan Motor0.37 920 240V 2.6 48YZ 1724C 11.4 CFC3642A-54 187 C1
MotorkW
Ratedrpm
Power Input50Hz
Full Loadamps
IECFrame
TypeNumber
ApproxWt. kgs
CatalogueNº
ListPrice
Group
0.18 1425 240V 1.2 63-B5 3328L 11 VL3303D-53 200 KM
0.25 1425 240V 2.8 71-B5 3418L 13 VL3406D-53 229 KM
0.37 1425 240V 4 71-B5 3424L 14 VL3409D-53 258 KM
0.55 1425 240V 5.8 80-B5 3524L 16 VL3507D-53 277 KM
0.75 1425 240V 6 80-B5 3528L 22 VL3510D-53 295 LM
0.18 1425 120/240V 2.4 D63-B5 3328L 12.5 CL3303D-51 225 KM
0.37 1425 120/240V 4 D71-B5 3424L 16 CL3404D-51 294 KM
0.75 1425 120/240V 6.8 D80-B5 3528L 21 CL3510D-51* 336 LM
1.5 1425 120/240V 11 D90-B5 3546LC 29 CL3516D-51 377 LM
2.2 1425 240V 12.5 D100L 3640LC 40 L3609-53 495 LM
3 1425 240V 15.3 D112M 3646LC 44 L3610-53 674 LM
4 1425 240V 21.7 D132S 3740LC 69 L3708-53 841 LM
5.5 1425 240V 30 D132M 3750LC 73 L3710-53 860 LM
Catalogue Nº prefix : VL = Flange Mount; CL = Foot and Flange Mount.Catalogue Nº VLxxxxD have B5 flange mount only, 1.0 Service Factor, IP55 with T-drains, Forsheda shaft flinger, neoprene gaskets on terminal box and capacitor cover.Cat Nº CLxxxxD have B5 flange and pressed metal foot for multipurpose mounting. (Foot DOES NOT COMPLY to IEC dimensions.)* D80-B5 Flange with 89mm shaft centre height. Catalogue Nº suffix -51 = 120/240V, 50Hz. (Suitable for use on 60Hz)Catalogue Nº suffix -53 = 240V, 50HZ, Service factor 1.0; F1 terminal box; Plastic terminal block Polyamide 66, 10A, PA10 from Multicomp or equivalent.
44 1300 BALDOR ✆ 1300 225 367
➤ Special design drain hole in each endplate with removable stainless plugs minimise moisture entry and maximise drainage ➤
➤ Foot and Face Mounting ➤➤ 200°C ‘ISR’ Spike Resistant Magnet Wire with Moisture Resistant Class F Insulation ➤
➤ Refer to page 45/46 for additional design features ➤
➤ JM Clipper Type high performance seal on driveshaft end (both ends on TEFC) ➤
➤ All Stainless Steel motor frame, base, shaft and hardware ➤
Wash-Down Duty ac Motors
Catalogue Number suffix -57 indicates 415V Star/240V Delta connection. ➤ Moisture resistant 200°C magnet wire, full Class F insulation system. Stator assembly processed twice through preheat, dip in non-hygroscopic polyester varnish and baking ➤
➤ All stainless steel hardware plus sealer used on all fasteners and housing fittings to prevent corrosion and entrance of moisture ➤
➤ Double sealed bearings lubricated with moisture resistant grease for longer life in wet environment ➤
➤ Special design drain hole in each endplate with removable stainless plugs minimise moisture entry and maximise drainage ➤
➤ JM Clipper Type high performance seal on driveshaft end (both ends on TEFC) ➤
➤ Neoprene gaskets prevent entrance of moisture into conduit box ➤
➤ USDA approved, ALL PAINT-FREE external finish to meet sanitary requirements while reducing chemical attack ➤
➤ All Stainless Steel motor frame, base, shaft and hardware ➤
➤ Refer to additional motor features as detailed on page 45/46 ➤
Stainless Steel IP65/IP66 Wash-Down Duty ac Motors➤ All exterior motor surfaces, shaft and
hardware are totally stainless steel, (non-metalic fan on TEFC models), USDA approved
➤ Designed for food processing and applications where the motor is constantly exposed to an environment requiring high pressure wash down to maintain cleanliness
➤ 415 Volt/3 Ph/50Hz➤ 200°C ‘ISR’ Spike Resistant Magnet
Wire with Moisture Resistant Class F Insulation
➤ TENV motors have excellent heat dissipation characteristics making them ideal variable speed applications
➤ IP66 available
‘Paint-Free’ IP65Wash-Down Duty ac Motors➤ 415 Volt/3
Ph/50Hz➤ All exterior motor
surfaces are totally paint-free, USDA approved
➤ Designed for food processing and applications where the motor is constantly exposed to an environment requiring high pressure wash down to maintain cleanliness
➤ Stainless steel motor frame, base, shaft and hardware
➤ Specially processed cast iron flange/endplate on drive end
➤ 200°C Magnet Wire with Moisture Resistant insulation
➤ IP66 available
MotorkW
Rated rpm
IEC Frame
Enclosure Type
Mount Style
Weight kg
Baldor Type
Catalogue Nº
List Price
Group
0.37 1440 NEMA 56C TENV 56C 21.5 3420M CSSEWDM3538-57 1,025 K
0.37 1440 NEMA 56C TENV 56C+Foot 17.7 3516M CSSWDM3538-57d 1,025 K
0.75 1440 NEMA 56C TENV 56C 22.7 3532M CSSEWDM3546-57 1,357 K
0.75 1440 NEMA 56C TENV 56C+Foot 22.7 3528M CSSWDM3546-57d 1,357 K
1.1 1440 D90C TEFC B3+B14 21.0 3528M CSSWDMM3554-57 1,357 LM
1.5 1440 D90C TEFC B3+B14 30.0 3540M CSSWDMM3558-57 1,366 LM
2.2 1440 D100C TEFC B3+B14 42.0 3632M CSSWDMM3611-57 1,530 LM
4 1440 D112C TEFC B3+B14 51.0 3646M CSSWDMM3615-58 1,675 LMd = To be discontinued when existing stock is depleted.
MotorkW
Ratedrpm
IEC Frame
EnclosureType
MountStyle
Weightkg
BaldorType
CatalogueNumber
List Price$(xLM)
0.75 1440 D90S TENV B3 Foot 20 3528M MSWDM3546-57 6880.75 1440 D80D TENV B5 Flange 21.8 3528M VSWDM3546D-57 6961.5 1440 D90L TEFC B3 Foot 27.2 3540M MSWDM3558-57 7221.5 1440 D90D TEFC B5 Flange 31.8 3540M VSWDM3558D-57 786
451300 BALDOR ✆ 1300 225 367
NEW MotorkW
Ratedrpm
IEC Frame Enclosure Type
MountStyle
Weightkg
BaldorType
CatalogueNº
ListPrice
Group
0.37 1440 D71-B3/B5 TEFC B3/B5 11.4 3416M CWAM3461-57^ 299 KM
0.56 1440 NEMA 56C TENV 56C/Foot 18.2 3520M CWAM3542-57 480 K
0.56 1440 D80D TENV B5 Flange 17 3520M VWAM3542D-57 510 KM
0.75 1440 90S TENV B3 Foot 21 3524M MWAM3546-57 476 LM
0.75 1440 D80D TENV B5 Flange 22 3524M VWAM3546D-57 518 LM
1.1 1440 90S TENV B3 Foot 29.5 3540M MWAM3554-57 539 LM
1.1 1440 D90D TENV B5 Flange 31.5 3540M VWAM3554D-57 573 LM
1.5 1440 90L TEFC B3 Foot 25 3535M MWAM3558-57 607 LM
1.5 1440 D90D TEFC B5 Flange 27 3535M VWAM3558D-57 619 LM
2.2 1440 112M TEFC B3 Foot 35 3628M MWAM3611-57 781 LM
2.2 1440 D100D TEFC B5 Flange 37.3 3628M VWAM3611D-57 828 LM
4 1440 112M TEFC B3 Foot 45 3643M MWAM3615-58 896 LM
4 1440 D112D TEFC B5 Flange 48 3643M VWAM3615D-58 934 LM
5.5 1440 132S TEFC B3 Foot 63 3735M MWAM3710-58 1,091 LM
5.5 1440 D132D TEFC B5 Flange 68 3735M VWAM3710D-58 1,138 LM
7.5 1440 132M TEFC B3 Foot 74 3746M MWAM3714-58 1,308 LM
7.5 1440 D132D TEFC B5 Flange 77 3746M VWAM3714D-58 1,350 LM
Dirty Duty ac Motors
➤ A new range of highly durable epoxy coated motors designed for the most severe and corrosive applications in the processing industry, and those that require intense high-pressure washdown.
➤ High performance Autophoretic® surface preparation for superior paint bonding.
➤ High performance, high durability coating bonded to the steel frame, cast iron endplates, conduit box, lid and base.
➤ FDA approved surface coating is impervious to high pressure, extreme temperatures and caustic chemicals
➤ Level of protection suitable for marine applications such as IEEE 45 and USCG 259 (below deck service).
➤ IP66 available
DirtyDutyWD®
ac Motors
Above motors have a terminal strip in the terminal box. Catalogue Number suffix -57 indicates 415V Star/240V Delta connection. Catalogue Number suffix -58 indicates 415V direct-on-line start.^ = Epoxy paint only on drive end shield.
➤ Four drain holes in each endplate with removable stainless plugs minimise moisture entry and maximise drainage. ➤
➤ JM Clipper Type high performance seal on driveshaft end (both ends on TEFC). ➤
➤ Neoprene rubber gaskets on conduit box and lid ensure a tight, waterproof seal. ➤
➤ Double dipped and baked varnish eliminates voids, provides stronger bond and improves moisture resistance for windings. Encapsulation adds another level of internal contaminant and moisture protection. ➤
➤ Precision die cast aluminum rotor, balanced and coated with an epoxy primer to resist corrosion. ➤
➤ 300 Stainless steel shaft prevents rust and corrosion. ➤
➤ Glass-filled polypropylene external fan, impervious to cleaning agents and other caustic solutions. ➤
➤ Exclusive 200°C ‘ISR’® (Inverter Spike Resistant) magnet wire up to 100 times more resistant to voltage spikes; provides an added thermal safety margin.➤
➤ Double sealed motor bearings with Mobil Polyrex® EM grease for improved lubrication life. Polyrex EM has greater shear stability and superior resistance to washout, rust and corrosion. ➤
➤ Improved exterior paint with Autophoretic® autodeposition surface preparation method for more corrosion and chip resistance. FDA approved epoxy powder coating electrostatically applied to inside and outside of body, end-plates and conduit box. ➤
➤ High temperature Class F insulation and low operating temperature rise (Class B) provides longer insulation and bearing life. ➤
46 1300 BALDOR ✆ 1300 225 367
IP65 Wash-Down Duty ac Motors➤ 415 Volt/3ph/50Hz➤ Designed for food
processing and other applications where the motor is constantly exposed to an environment requiring high pressure wash down to maintain cleanliness
➤ USDA Approved Epoxy Finish➤ 200°C Magnet Wire with Moisture
Resistant Insulation
➤ Maintenance-friendly drain designFour condensate drain holes in each endplate allow thorough drainage, regardless of motor’s mounting position. Distinctive blue colour of drain plugs makes them easy to recognise; new shape makes them easy to remove. Notched fan cover allows easy access to condensate drain plugs without removing fan cover.➤
➤ Neoprene rubber gaskets on conduit boxEnsure a tight, waterproof seal. ➤
➤ Windings engineered for durabilityDouble dipped and baked varnish eliminates voids provides stronger bond and improves moisture resistance. Encapsulation adds another level of internal contaminant and moisture protection. ➤
➤ Precision die cast aluminum rotor Precision balanced and coated with an epoxy primer to resist corrosion. ➤
➤ S/S Shaft300 Stainless prevents rust and corrosion. ➤
➤ Slinger & SealForsheda® slinger and contact lip seal on output shaft extension. An extra measure of protection to keep contaminants out. ➤
➤ Oversized conduit boxExceeds NEC standards; make connections easier. ➤
➤ Glass-filled polypropylene external fanImpervious to cleaning agents and other caustic solutions. ➤
➤ High temperature Class F insulationLow temperature (Class B) rise provides longer insulation and bearing life. ➤
➤ Multiple foot mounting holesMakes motor change-out easy. ➤
➤ Locked bearing construction onC-face motors Reduces endplay and allows vertical mounting. ➤
➤ Exclusive ISR® (Inverter Spike Resistant)Magnet wire up to 100 times more resistant to voltage spikes; provides an added thermal safety margin.➤
➤ Mobil Polyrex® EM greaseStandard double sealed motor bearings better for improved lubrication life. Polyrex EM has greater shear stability and superior resistance to washout, rust and corrosion. ➤
➤ Improved exterior paint – 5 times better!Autophoretic® autodeposition surface preparation method makes finish coat five times more resistant to corrosion and chipping than previous methods. Withstands ASTM B117 salt spray test for over 500 hours. FDA approved epoxy powder coating electrostatically applied (inside and outside) on end-plate and conduit box for thorough corrosion prevention and long lasting finish. ➤
Can outlast up to 10 ordinary TEFC motors!Can outlast up to 10 ordinary TEFC motors!
Wash-Down Duty ac Motors
MotorkW
Ratedrpm
IEC Frame
EnclosureType
MountStyle
Weightkg
Baldor Type
Catalogue Nº ListPrice
Group
0.37 1440 D71-B3/B5 TEFC B3/B5 11.4 3416M CWMM3461-57 298 KM
0.56 1440 NEMA 56C TENV 56C/ Foot 14.5 3520M CWDM3542-57 431 K
0.56 1440 D80D TENV B5 Flange 20 3520M VWDM3542D-57 491 KM
0.75 1440 90S TENV B3 Foot 21 3524M MWDM3546-57 459 LM
0.75 1440 D80D TENV B5 Flange 22 3528M VWDM3546D-57 499 LM
1.1 1440 90S TENV B3 Foot 22 3540M MWDM3554-57 520 LM
1.1 1440 D90D TENV B5 Flange 25.5 3540M VWDM3554D-57 553 LM
1.5 1440 90L TEFC B3 Foot 20 3535M MWDM3558-57 585 LM
1.5 1440 D90D TEFC B5 Flange 23 3535M VWDM3558D-57 597 LM
2.2 1440 112M TEFC B3 Foot 33 3628M MWDM3611-57 753 LM
2.2 1440 D100D TEFC B5 Flange 38 3628M VWDM3611D-57 798 LM
4 1440 112M TEFC B3 Foot 45 3643M MWDM3615-58 863 LM
4 1440 D112D TEFC B5 Flange 55 3640M VWDM3615D-58 900 LM
5.5 1440 132S TEFC B3 Foot 56 3735M MWDM3710-58 1,051 LM
5.5 1440 D132D TEFC B5 Flange 56 3735M VWDM3710D-58 1,096 LM
7.5 1440 132M TEFC B3 Foot 71 3746M MWDM3714-58 1,260 LM
7.5 1440 D132D TEFC B5 Flange 71 3746M VWDM3714D-58 1,301 LMThis series is to be discontinued when existing stocks are depleted. For replacement items, please refer to ‘Dirty Duty WD Series’.
Wash-Down DutyWash-Down Dutydc Motorsdc Motors
Please see page 5Please see page 5
471300 BALDOR ✆ 1300 225 367
Type GLP5338
Type GCP24524
Type GCP25558
Parallel Shaft ac Gearmotors1 Phase➤ Continuous Duty ➤ TEFC or TENV➤ Hardened Steel Helical Gears➤ Diecast Alloy Housing & Flange Mount
Face➤ Suit Horizontal or Vertical Mounting➤ Reversible Rotation➤ Baked Enamel Finish➤ Synthetic Oil Filled Gearbox
(MOBIL SHC 634)
ac Gearmotors
Motor Input kW
Full Load Output rpm
Max. Trq.Nm
Gear Ratio : 1
Approxkg
Volt Code (see Notes)
Motor/Gearbox Type Number
CatalogueNº
List Price Group (K)
0.03 4.7 35 300 4.5 B 2416C-PSL-0 GCP2464 619
0.03 14.7 13 90 4.5 A 2416C-PSSH-0 GCP24522 438
0.03 22.9 9 60 4.5 A 2416C-PSSH-0 GCP24524 438
0.04 8 38.4 180 6.8 B 2418C-PSL-0 GCP2462 653
0.062 15.1 26.7 90 4.5 A 2424C-PSM-0 GCP24532 570
0.062 16 38.4 180 4.5 A 2518L-PSL-0 GLP2560 679
0.062 45.5 9.4 30 5.0 A 2424C-PSSH-0 GCP24534 464
0.062 136 3.2 10 5.5 A 2424C-PSSH-0 GCP24540 464
0.082 35.6 16.8 40 4.5 A 2528L-PSM-0 GLP25552 535
0.082 94 6.4 15 7.7 A 2524S-PSM-0 GCP25558 679
0.12 24 34 120 8.3 A 2524L-PSL-1 GLP2559 679
0.12 32 33 90 8.3 A 2524L-PSL-1 GLP2558 679
0.18 23 60 60 10.5 B 328-PSLH-1 GCP5310 803
0.18 48 30.5 60 4.5 A 2524L-PSL-0 GLP2557 648
0.18 57 25 50 8.1 A 2524L-PSL-0 GLP2556 648
0.18 71 20.3 40 8.1 A 2524L-PSL-0 GLP2555 648
0.18 95 15.3 30 8.1 A 2524L-PSL-0 GLP2554 648
0.18 143 10.2 20 8.1 A 2524L-PSL-0 GLP2553 648
0.18 190 7.3 15 8.1 A 2524L-PSL-0 GLP2552 648
0.18 285 5.1 10 8.1 A 2524L-PSL-0 GLP2551 648
0.18 570 2.8 5 8.1 A 2524L-PSL-0 GLP2550 648
0.25 35 54 40 13 B 328-PSLH-1 GLP5340 883
0.25 48 36 30 12.7 B 324-PSLH-1 GLP5330 785
0.25 72 24.6 20 12.7 B 324-PSLH-1 GLP5332 785
0.25 144 12.3 10 12.7 B 324-PSLH-1 GLP5336 785
0.25 288 6.2 5 12.7 B 324-PSLH-1 GLP5338 785
0.37 47 66 30 15.1 B 332-PSLH-1 GLP5342 832
0.37 71 45 20 15.1 B 332-PSLH-1 GLP5344 832
0.37 94 34 15 15.1 B 332-PSLH-1 GLP5346 832
0.37 142 22 10 15.1 B 332-PSLH-1 GLP5348 832
0.37 284 11 5 15.1 B 332-PSLH-1 GLP5350 832
“B” Steel Foot Mount. Bolts to bottom of PSM gearbox B92 - 32
“L” Type Mounting Bracket to mount type PSSH LB73 - 39
“L” Type Mounting Bracket to mount type PSL & PSLH LB74 - 39
L brackets securely mount to gear face in 90° locations for floor, wall or ceiling mount.
Motor Type S = Split Phase, 240V. (No capacitor required). EG 2524S-xxxx-xMotor Type C = Permanent Split Capacitor. (Capacitor in polypropylene case supplied loose). eg 2418C-xxxx-xMotor Type 25 - - L = Capacitor start with relay – 240V only. eg 2524L-xxxx-xType -0 = TENV. Type -1 = TEFC. eg xxxx-xxx-0Volt Code ‘A’ = 240 Vac 1 phase only Volt Code ‘B’ = 120/240 Vac 1 phase.
37
SEE PAGE
48 1300 BALDOR ✆ 1300 225 367
ac Gearmotors
Type GMP2555
Type GMP5348
Type GMP2447
Parallel Shaft ac Gearmotors3 Phase➤ Continuous Duty ➤ TEFC or TENV➤ Dual Voltage
415V Star and 240V Delta➤ Hardened Steel Helical Gears➤ Diecast Alloy Housing & Flange Mount
Face➤ Suit Horizontal or Vertical Mounting➤ Reversible Rotation➤ Baked Enamel Finish➤ Synthetic Oil Filled Gearbox
(MOBIL SHC634)
Motor Input kW
Full Load Output rpm
Max. Trq.Nm
Gear Ratio : 1 Approx kg
Motor/Gearbox Type Number
Catalogue Number
List Price $(xK)
0.007 4.8 10.6 300 4.3 2416M-PSSH-0 GMP2440 452
0.012 8 10.5 180 4.3 2416M-PSSH-0 GMP2441 434
0.03 15 13.1 90 4.6 2420M-PSSH-0 GMP2442 466
0.05 27 13.3 50 4.6 2420M-PSSH-0 GMP2443 466
0.075 45 12 30 4.6 2420M-PSSH-0 GMP2444 466
0.075 67.5 8.74 20 4.6 2420M-PSSH-0 GMP2445 466
0.075 135 4.38 10 4.6 2420M-PSSH-0 GMP2446 466
0.075 270 2.2 5 4.6 2420M-PSSH-0 GMP2447 466
0.012 4.7 20.5 300 7.5 2420M-PSM-0 GMP2450 506
0.024 7.8 24.5 180 7.5 2420M-PSM-0 GMP2451 506
0.05 15 25.6 90 7.5 2420M-PSM-0 GMP2452 506
0.07 27 20.8 50 7.5 2420M-PSM-0 GMP2453 506
0.03 4.7 35 300 7.5 2416M-PSL-0 GMP2464 499
0.04 8 38.4 180 7.5 2416M-PSL-0 GMP2462 679
0.08 16 38.4 180 7.5 2516M-PSL-0 GMP2560 679
0.12 24 34 120 7.2 2516M-PSL-0 GMP2559 679
0.12 32 33 90 7.2 2516M-PSL-0 GMP2558 679
0.18 48 30 60 8.2 2524M-PSL-0 GMP2557 591
0.18 57 25 50 8.2 2524M-PSL-0 GMP2556 591
0.18 71 20 40 8.2 2524M-PSL-0 GMP2555 591
0.18 95 15.3 30 8.2 2524M-PSL-0 GMP2554 591
0.18 143 10 20 8.2 2524M-PSL-0 GMP2553 591
0.18 190 7.3 15 8.2 2524M-PSL-0 GMP2552 591
0.18 285 5.1 10 8.2 2524M-PSL-0 GMP2551 591
0.18 570 2.8 5 8.2 2524M-PSL-0 GMP2550 591
0.19 24 60 60 9.1 320M-PSLH-1 GMP5310 720
0.25 36 54 40 9.1 320M-PSLH-1 GMP5340 720
0.25 48 36 30 9.1 320M-PSLH-1 GMP5330 720
0.25 72 24.6 20 9.1 320M-PSLH-1 GMP5332 720
0.25 144 12.3 10 9.1 320M-PSLH-1 GMP5336 720
0.25 288 6.2 5 9.1 320M-PSLH-1 GMP5338 720
0.37 48 66 30 14 328M-PSLH-1 GMP5342 832
0.37 71 45 20 14 328M-PSLH-1 GMP5344 832
0.37 95 34 15 14 328M-PSLH-1 GMP5346 832
0.37 143 22 10 14 328M-PSLH-1 GMP5348 832
0.37 286 11 5 14 328M-PSLH-1 GMP5350 832
“B” Steel Foot Mount. Bolts to bottom of PSM gearbox B92 32
“L” Type Mounting Bracket to mount type PSSH LB73 39
“L” Type Mounting Bracket to mount type PSL & PSLH LB74 39
NOTE: L brackets securely mount to gear face in 90° locations for floor, wall or ceiling mount.
Type -0 = TENV. Type -1 = TEFC.
37
SEE PAGE
491300 BALDOR ✆ 1300 225 367
ac Gearmotors
Type GM25134
Right Angle Drive ac Gearmotors3 Phase➤ Continuous Duty TENV ➤ Hardened Steel Worm, Precision Hobbed
Bronze Gear➤ Robust Diecast Alloy Gear Housing➤ Internal Expansion Bladder on Type BA,
CB and JK gearboxes to accommodate pressure build-up
➤ Suit Horizontal or Vertical Mounting ➤ Reversible Rotation➤ Baked Enamel Finish➤ Synthetic Oil Filled Gearbox
( MOBIL SHC634)
Right Angle Drive ac Gearmotors1 Phase➤ Continuous Duty ➤ TEFC or TENV motor➤ Hardened Steel Worm, Precision Hobbed
Bronze Gear➤ Robust Diecast Alloy Gear Housing➤ Internal Expansion Bladder on Type BA,
CB and JK gearboxes to accommodate pressure build-up
➤ Reversible Rotation➤ Baked Enamel Finish➤ Suit Horizontal or Vertical
Mounting ➤ Synthetic Oil Filled Gearbox
(MOBIL SHC634)
Motor Input kW
Full Load Output rpm
Max. Trq. Nm
Gear Ratio : 1
Approx kg Volt Code (see Notes)
Motor/Gearbox Type Number
CatalogueNº
List Price$(xK)
0.02 1.2 19.7 1200 5.8 B 2416C-EB-O GC24121 6270.02 2.4 8.5 600 3.6 B 2412C-DB-O GC24119 5320.02 7 8.5 198 4.5 B 2416C-DB-O GC24117 5320.03 14 8.5 100 4.9 B 2416C-DB-O GC24114 5320.04 3.1 17 450 5.7 B 2416C-EB-O GC24120 6270.06 9.3 14 150 6.8 B 2424C-EB-O GC24116 6270.08 31 14.1 45 8.2 A 2528L-JK-1 GL25137 6020.096 42 11.6 33 8.2 A 2528L-JK-1 GL25136 6020.096 62 10.1 22.5 8.2 A 2528L-JK-1 GL25134 6410.12 190 3.8 15 6.9 A 2524L-BA-O GL25129 5530.15 289 2.9 10 6.9 A 2524L-BA-1 GL25128 5530.18 86 12.4 33 7.8 A 2524L-JK-1 GL25140 6600.18 126 10 22.5 7.8 A 2524L-JK-1 GL25139 6600.18 260 4.5 11 7.8 A 2524L-JK-0 GL25138 6600.18 575 1.8 5 6.6 A 2524L-BA-1 GL25127 553
Motor Type C = Permanent Split Capacitor. (Capacitor in polypropylene case supplied loose).Motor Type L = Capacitor start with relay.Volt Code ‘A’ = 240 Vac 1 phase only Volt Code ‘B’ = 120/240 Vac 1 phase.Type -0 = TENV. Type -1 = TEFC.
Motor Input kW
Full Load Output rpm
Max. Trq.Nm
Gear Ratio: 1
Approx kg
Motor/Gearbox Type Number
CatalogueNº
List Price $(xK)
0.02 1.2 20 1200 5.0 2510M-EB-O GM25121 5720.02 2.4 8.5 600 5.0 2510M-DA-O GM25119 5320.03 3.6 14.1 400 4.5 2510M-EB-O GM25120 5720.03 7.3 8.5 198 4.5 2510M-DA-O GM25117 5320.04 14.3 8.5 100 5.0 2510M-DA-O GM25114 5320.05 9.3 14.1 150 5.7 2510M-EB-O GM25116 5720.09 31.8 14.1 45 5.0 2524M-JK-O GM25137 6600.13 191 3.8 15 5.5 2520M-BA-O GM25129 5410.13 61.5 13 22.5 7.3 2524M-JK-O GM25134 6600.14 41.7 16.7 33 7.3 2524M-JK-O GM25136 6600.15 285 2.9 10 6.0 2520M-BA-O GM25128 5410.15 560 1.7 5 6.0 2520M-BA-O GM25127 5410.18 254 4.9 11 7.3 2524M-JK-O GM25138 6600.25 86 12.4 33 7.3 2524M-JK-O GM25140 6450.25 126 10 22.5 7.3 2524M-JK-O GM25139 645
Type M motors = 415V Star/240V Delta connection.Type -0 = TENV.
37
SEE PAGE
37
SEE PAGE
50 1300 BALDOR ✆ 1300 225 367
Spare Parts for dc Motors & Tachos
Motor Catalogue Number BRUSH LIST PRICE$(xP1)
HOLDER* Includes brushes
LIST PRICE$(xP1)
CAP LIST PRICE$(xP1)
SPRING LIST PRICE$(xP1)
AP233021 BP5060BF02SP 37.00 BP4517 9.00 BP4515SP 2.00 – –
AP7421 & 7422 BP5052BP01SP 22.00 BP4529SP 12.00 BP4530SP 2.00 –
CD34xx & VD34xx BP5000H03SP 27.00 BP5201A10SP 39.00 BP4509A01SP 4.00 – –
CD5318 BP5000T07SP 59.00 BP5201A14SP 49.00 BP4511A01SP 6.00 – –
CD62xx & VD62xx BP5001P01SP 52.00 36RK5002SP 192.00 – – BP2000A01SP 8.00
CD7503 BP5070A01SP 23.00 29RK5015 140.00 – – BP5098SP 14.00
CD9104 BP5002A02SP 51.00 30RK5000A02 1,149.00 – – BP2004A01SP 6.00
CD9105 BP5258A01SP 33.00 30RK5000A02 1,149.00 – – BP5103 18.00
CDP33xx -180v BP5011AB01SP 23.00 33RK5004SP 115.00 – 6.00 BP5012A04SP 8.00
CDP33xx-90v BP5011T01SP 23.00 33RK5004SP 115.00 33CB4501A01SP 2.00 BP5012A04SP 8.00
CDP34xx-180v BP5000AW14SP 26.00 BP5201A11SP 22.00 BP4511A01SP 6.00 – –
CDP34xx-90v BP5000BK08SP 23.00 BP5201A11SP 22.00 BP4511A01SP 6.00 – –
CDP3410-V12, CDP3410,20,30-V24 BP5104BV01SP 37.00 34RK5006 30.00 34CB4519 4.00 BP5100 12.00
CDP3445-V12 BP5112AU01 55.00 34RK5006 30.00 34CB4519 4.00 BP5100 12.00
CDP35xx BP5000T15SP 49.00 BP5201A14SP 49.00 BP4511A01SP 6.00 – –
CDP3603 BP5031A01SP 75.00 36RK5009A01* 215.00 – – BP5030 8.00
CDP3605 BP5027A01SP 110.00 36RK5008A01* 232.00 – – BP5028 8.00
CDPT3455 BP5000AW14SP 26.00 BP5201A11SP 22.00 BP4511A01SP 6.00 – –
D35xx BP5004C01SP 131.00 27RK5001 221.00 – – BP2002A01SP 8.00
D42xx 150986-21-2SP 95.00 150944 74.00 – – 15064-1SP 26.00
D4318 150986-25-2SP 171.00 150944 74.00 – – 15064-1SP 26.00
D44xx 28610-2SP 160.00 150945 153.00 – – 15031-1SP 25.00
D45xx 28610-2SP 160.00 15019-2 128.00 – – 15031-1SP 25.00
D46112 & D46150 36024-3SP 104.00 36070 221.00 – – 36069 40.00
D46187 40019-3SP 131.00 40055 219.00 – – 15778 43.00
D4693 36024-3SP 104.00 36070 221.00 – – 36069 40.00
D9176 BP5002H02SP 50.00 BP5205A01SP 52.00 – – – –
GP233020 - GP233029, GPP23xxx BP5060BF02SP 37.00 BP4517 9.00 BP4515SP 2.00 – –
GP7420 - GP7433,GPP74xx, GPP12521, GPP12525, GPP12527-GPP12568 BP5052BP01SP 22.00 BP4529SP 12.00 BP4530SP 2.00 – –
GPP33xx BP5011AB01SP 23.00 33RK5004SP 115.00 33CB4501A01SP 2.00 BP5012A04SP 8.00
P34xx & SP34xx BP5000C08SP 63.00 BP5201A11SP 22.00 BP4511A01SP 6.00 – –
S4527 & S4534 BP5018AG01 31.00 BP5212A03 90.00 – – BP2004A01SP 8.00
VD3528D BP5004C01SP 131.00 BP5202A01 66.00 – – BP2002A01SP 8.00
VD5318D BP5000T07SP 59.00 BP5201A14SP 49.00 BP4511A01SP 6.00 – –
VD7503D BP5002A02SP 51.00 29RK5002SP 316.00 – – BP2002A01SP 8.00
VP1356-14 BP5052BP01SP 22.00 BP4529SP 12.00 BP4530SP 2.00 – –
VP3575-14 BP5000T15SP 49.00 BP5201A14SP 49.00 BP4511A01SP 6.00 – –
VP3311D, VP3312D, VP3316D BP5011AB01SP 23.00 33RK5004SP 115.00 33CB4501A01SP 2.00 BP5012A04SP 8.00
VP3318D BP5000AW14SP 26.00 BP5201A11SP 22.00 BP4511A01SP 6.00 – –
VP3326D, VP3328D BP5011AB01SP 23.00 33RK5004SP 115.00 33CB4501A01SP 2.00 BP5012A04SP 8.00
VP3420D & VP3420-14 BP5000C08SP 63.00 BP5201A11SP 22.00 BP4511A01SP 6.00 – –
VP3428-14, VP34xxx, VP3439-14, VP3468-14 BP5000AW14SP 26.00 BP5201A11SP 22.00 BP4511A01SP 6.00 – –
VP3524D BP5000C07 33.00 BP5201A14SP 49.00 BP4511A01SP 6.00 – –
VP3575D-VP3588D & VP3588-14 BP5000T15SP 49.00 BP5201A14SP 49.00 BP4511A01SP 6.00 – –
VP3603D BP5031A01SP 75.00 36RK5009A01* 215.00 – – BP5030 8.00
VP3605D BP5027A01SP 110.00 36RK5008A01* 232.00 – – BP5028 8.00
VP742xx BP5052BP01SP 22.00 BP4529SP 12.00 BP4530SP 2.00 – –
VP7431-14 & VP7441-14 BBR1088SP 23.00 BP4529SP 12.00 BP4530SP 2.00 – –
VP3420D-V12 BP5104BV01SP 37.00 34RK5006 30.00 34CB4519 4.00 BP5100 12.00
VP3455D-V12 & VP3455-14-V12 BP5112AU01 55.00 34RK5006 30.00 34CB4519 4.00 BP5100 12.00
VPT3326D BP5011AB01SP 23.00 33RK5004SP 115.00 33CB4501A01SP 2.00 BP5012A04SP 8.00
VPT3455D BP5000AW14SP 26.00 BP5201A11SP 22.00 BP4511A01SP 6.00 –
VPT3585D BP5000T15SP 49.00 BP5201A14SP 49.00 BP4511A01SP 6.00 –
VPT3603D BP5031A01SP 75.00 36RK5009A01* 215.00 – – BP5030 8.00
VPWD3312D & VPWD3326D BP5011AB01SP 23.00 33RK5004SP 115.00 33CB4501A01SP 2.00 BP5012A04SP 8.00
VPWD3455D & VPWD3458D BP5000AW14SP 26.00 BP5201A11SP 22.00 BP4511A01SP 6.00 – –
VPWD3585D BP5000T15SP 49.00 BP5201A14SP 49.00 BP4511A01SP 6.00 – –
BTG1000 BP5060BD02SP 39.00 BP4517 12.00 BP4515SP 4.00 – –
PTG50XP/PFTG50XP BP5118AK01SP 142.00 26D004 14.00 BP4515SP 4.00 – –
PTG60XPS-M 15D051-1SP 95.00 BP4542 51.00 BP4525 4.00 – –
PTG100XP/PFTG100XP BP5118AK01SP 142.00 BP4541 14.00 BP4515SP 4.00 – –
Real TimeReal TimeETHERNET Powerlink ETHERNET Powerlink
➤ Baldor MicroFlex e100 Dual Interface Single Axis ac Servo Drive has both ETHERNET Powerlink and CiA DS402 positioning capabilities allowing cost effective and progressive migration of current CiA DS402 systems to 100Mb ETHERNET.
➤ High performance control of ac servo motors and 3ph stepper motors. 3, 6 or 9 amp with 200% peak capacity.
➤ Concurrent dual interface allows partitioning of the system (eg. can have ETHERNET Powerlink core and drives, with sub-networks of CANopen I/O modules connected to the drives.
➤ Dual port ethernet for simple daisy-chaining of drives.➤ Match with Baldor NextMove e100 Motion Controller for
effi cient management of interpolated motion on up to 16 ETHERNET Powerlink axes, and control of many more in CiA DS402 mode.
MintDriveMintDrive IIII
Real time problem Real time problem solving for up to solving for up to
32 axes32 axes
www.baldor.com.au
Published by BALDOR AUSTRALIA Pty Limited A.B.N. 46 002 325 886. Publication BAL8994.BMS0408
The Baldor H2 family of drives operate three phase induction motors in several control modes as either an open or closed
loop control. Open loop speed control is available as Inverter Volts per Hertz and Encoderless Vector. Closed loop Vector control is accomplished using a sophisticated fourth generation space vector control algorithm and motor feedback. H2 drive models are also available to control closed loop permanent magnet AC servomotors using motor feedback.
All Baldor H2 drives include the industry leading removable keypad plus simple and consistent series-wide programming routines for fast set-up and user-friendly operation.
Performance Comparison H2 Control Algorithms Volts per Hertz Control Encoderless Vector Vector Drive Servo Drive
Velocity Loop bandwidth in Hz without the Dynamic Brake Module (DB) >1Hz w/o DB 10 Hz w/o DB 50 Hz w/o DB 100 Hz w/o DB
Minimum speed with full load (RPM) 90 20 0 0 Maximum speed with 25% load (RPM) 1.5 X Base Speed 2 X Base Speed 2.5 X Base Speed 2.0 X Base Speed Minimum acceleration time (seconds) 3 1 0.1 0.01 Minimum deceleration time (seconds) 3 1 0.1 w/DB 0.01 Maximum starting torque (%) 150% 175% 200% 200% Speed regulation at full load (%) ± 3% (base) ± 1% (base) ± 0.01% (set) ± 0.01% (set)
The numbers above are for comparison only. Specific system dynamics will affect exact data.
MelbourneUnit 8, 5 Kelletts Road, Rowville VIC 3178
Telephone: (03) 9753 4355 Facsimile: (03) 9753 4366
SydneyUnit 3, 6 Stanton Road, Seven Hills NSW 2147
Telephone: (02) 9674 5455 Facsimile: (02) 9674 2495Email: [email protected]
✆ 1300 BALDOR ✆ 1300 225 367 ✆
BALDOR AUSTRALIA PTY LIMITED