abb-welcome m2303 guard unit · pdf file4.1.2 welcome screen and status bar fig. 2 start on...

VER:1.1 │ │ 20.10.2015

ABB-Welcome

Pos: 2 /Di nA4 - Anleitung en Online/Inhalt /KN X/D oorEntr y/83220- AP- xxx/Titelbl att - 83220-AP- xxx - ABB @ 19\mod_1323249806476_15.docx @ 111084 @ @ 1

M2303

Guard Unit

=== Ende der Liste für Textmar ke Cover ===

ABB-Welcome

| — 2 —

Pos: 4 /Busch-Jaeger (Neus truktur)/M odul-Str uktur/Online-Dokumentation/Inhal tsverzeichnis (--> Für alle D okumente <--)/Inhaltsverzeichnis @ 19\mod_1320649044386_15.docx @ 109653 @ @ 1

1 Safety ............................................................................................................ 4 2 Intended use .................................................................................................. 4 3 Environment .................................................................................................. 4

3.1 ABB devices ................................................................................. 4 4 Operation ....................................................................................................... 6

4.1 Standard operation ....................................................................... 6 4.1.1 Control elements .......................................................................... 6 4.1.2 Welcome screen and status bar ................................................... 8 4.2 Control actions ............................................................................ 10 4.2.1 Incoming call / During a call ........................................................ 10 4.2.2 Display settings during calls ....................................................... 12 4.2.3 Intercept mode ............................................................................ 13 4.2.3.1 VIP settings ................................................................................ 15 4.2.4 Communication ........................................................................... 18 4.2.5 Surveillance ................................................................................ 21 4.2.6 Switch actuator ........................................................................... 22 4.2.7 User list ....................................................................................... 23 4.2.8 History ........................................................................................ 25 4.2.9 Settings (Basic) .......................................................................... 28 4.2.9.1 Ringtone settings ........................................................................ 28 4.2.9.2 Volume settings .......................................................................... 29 4.2.9.3 Date and time settings ................................................................ 30 4.2.9.4 Other settings ............................................................................. 31 4.2.9.5 Language settings ...................................................................... 32 4.2.9.6 Information .................................................................................. 33 4.2.10 Settings (Advanced) ................................................................... 34 4.2.10.1 Switch actuator settings .............................................................. 35 4.2.10.2 Program button settings .............................................................. 37 4.2.10.3 User list management ................................................................. 38 4.2.10.4 Call code settings ....................................................................... 42 4.2.10.5 Password settings ...................................................................... 43 4.2.10.6 Reset factory default ................................................................... 44 4.2.10.7 Reset Password & Clear All Data ............................................... 45 4.3 Cleaning ..................................................................................... 46 4.4 Adjusting the device.................................................................... 47

5 Technical data ............................................................................................. 48

ABB-Welcome

| — 3 —

6 Mounting / Installation .................................................................................. 49 6.1 Requirements for the electrician ................................................. 49 6.2 General installation instructions .................................................. 50 6.3 Mounting ..................................................................................... 51

=== Ende der Liste für Textmar ke TOC ===

ABB-Welcome

| — 4 —

Pos: 6 /Busch-Jaeger (Neus truktur)/M odul-Str uktur/Online-Dokumentation/Überschriften (--> Für alle Dokumente <--)/1. Ebene/S - T/Sicherheit @ 18\mod_1302612791790_15.docx @ 103357 @ 1 @ 1

1 Safety Pos : 7 /Busch-Jaeger (Neus truktur)/M odul-Str uktur/Online-Dokumentation/Sicherheit (--> Für all e D okumente <--)/Warnhi nweise/Sicherheit - 230 V @ 18\mod_1302606816750_15.docx @ 103308 @ @ 1

Warning

Electric voltage!

Risk of death and fire due to electrical voltage of 100-240 V.

– Work on the 100-240V supply system may only be performed by

authorised electricians!

– Disconnect the mains power supply prior to installation and/or

disassembly!

Pos: 8 /Busch-Jaeger (Neus truktur)/M odul-Str uktur/Online-Dokumentation/Überschriften (--> Für alle Dokumente <--)/1. Ebene/A - F/Bes ti mmungsgemäßer Gebrauch @ 18\mod_1302763321316_15.docx @ 103483 @ 1 @ 1

2 Intended use Pos : 9 /Di nA4 - Anleitung en Online/Inhalt /KN X/D oorEntr y/83220- AP- xxx/Besti mmungsg emaesser Gebrauch - 83220-AP- xxx- 500 @ 20\mod_1324561168699_15.docx @ 112728 @ @ 1

The M2303 is an integral part of the ABB-Welcome door communication system and

operates exclusively with components from this system. The device must only be

installed in dry indoor rooms.

Pos: 10 /Busch-Jaeg er (Neustr uktur)/Modul- Struktur /Online-Dokumentati on/Überschriften (--> Für alle D okumente <--)/1. Ebene/U - Z/U mwelt @ 18\mod_1302614158967_15.docx @ 103383 @ 1 @ 1

3 Environment Pos : 11 /Busch-Jaeg er (Neustr uktur)/Modul- Struktur /Online-Dokumentati on/U mwel t (--> Für alle D okumente <--)/Hinweise/Hi nweis - U mwelt - Hinweis Elektrog eräte @ 18\mod_1302763973434_15.docx @ 103500 @ @ 1

Consider the protection of the environment!

Used electric and electronic devices must not be disposed of with

domestic waste.

– The device contains valuable raw materials which can be recycled.

Therefore, dispose of the device at the appropriate collecting

depot.

Pos: 12 /DinA4 - Anl eitungen Onli ne/Ueberschrif ten/2./ABB Geraete @ 19\mod_1323162843832_15.docx @ 110875 @ 2 @ 1

3.1 ABB devices Pos : 13 /Busch-Jaeg er (Neustr uktur)/Modul- Struktur /Online-Dokumentati on/U mwel t (--> Für alle D okumente <--)/Hinweise/Hi nweis - U mwelt - ABB El ektr ogeräte @ 19\mod_1323162745839_15.docx @ 110867 @ @ 1

All packaging materials and devices from ABB bear the markings and test seals for

proper disposal. Always dispose of the packaging material and electric devices and their

components via the authorized collecting depots and disposal companies.

ABB-Welcome

| — 5 —

ABB products meet the legal requirements, in particular the laws governing electronic

and electrical devices and the REACH ordinance.

(EU-Directive 2002/96/EG WEEE and 2002/95/EG RoHS)

(EU-REACH ordinance and law for the implementation of the ordinance (EG)

No.1907/2006)

ABB-Welcome

| — 6 —

Pos: 18 /DinA4 - Anl eitungen Onli ne/Ueberschrif ten/1./Bedi enung @ 18\mod_1302613924165_15.docx @ 103365 @ 1 @ 1

4 Operation Pos : 19 /DinA4 - Anl eitungen Onli ne/Ueberschrif ten/2./Nor maler Betrieb @ 18\mod_1302768820965_15.docx @ 103540 @ 2 @ 1

4.1 Standard operation Pos : 20 /DinA4 - Anl eitungen Onli ne/Ueberschrif ten/3./Bedi enel emente @ 20\mod_1323260220559_15.docx @ 111647 @ 3 @ 1

4.1.1 Control elements Pos : 21 /DinA4 - Anl eitungen Onli ne/Inhalt/KN X/D oor Entr y/83220-AP- xxx/Bedi enelemente - 83220- AP- xxx @ 18\mod_1303212853605_15.docx @ 103673 @ @ 1

Fig. 1 Over view of the control buttons

ABB-Welcome

| — 7 —

No. Function

1 Handset

When a call is coming, pick up handset to activate the communication

within 30 seconds and hang up handset to end the call.

2 4.3“ Touch screen.

3 Unlock button

Press this button to open the door at any time.

If the LED flashes slowly, this means an incoming call.

If the LED flashes rapidly, it means system is busy or the door has been

opened over the set time (The sensor must be connected first).

4 Surveillance button

In standby mode, press this button to survey the default outdoor station.

5 Programmable button 1,2,3

5A *Programmable buttons for additional functions, e.g. control the switch

actuator.

5B Default function of button 1 is release the lock connected with an

outdoor station (COM-NC-NO)

6 System setting button

Enter into the system setting for various functions of the device.

*For their use, please contact your electrical installer.

ABB-Welcome

| — 8 —

4.1.2 Welcome screen and status bar

Fig. 2 Start

On the start page, the following functions are available:

No. Function

1 Intercept

- Press this button to switch to intercept settings.

2 Communication

- Press this button to enter the communication menu

3 Surveillance

In standby mode, press this button to survey the default outdoor station.

4 Switch actuator

- Press this button to enter the switch actuator menu and enable the

existing actuators here.

5 User list

- Touch this button and then check the contact list.

6 History

- Press this button to enter the history menu. All events and alarms from

indoor stations can be found here.

7 System settings (basic)

- Press this button to set some basic functions for the device,

e.g. ringtone, volume and local language.

START

1

2013/01/01 00:00

2 3 4

9 6 7 8

10

5

11 12 13

ABB-Welcome

| — 9 —

8 System settings (advance)

- Press this button to set the various advanced functions for the

device, e.g. switch actuator setting and user list management.

9 Date and time

- Press this button to switch to date and time settings.

10 Cleaning locking

- This icon appears when the display is locked to prevent functions being

triggered during cleaning.

11 Alarm history

- This icon appears when new alarm information is available in the alarm

history.

- Touch this icon and then events will be displayed.

12 Call history

- The icon appears when new call information is available in the call

history.

- Touch this icon and then events will be displayed.

13 Intercept

- The icon appears when the guard unit is in the intercept mode.

Pos: 22 /Busch-Jaeg er (Neustr uktur)/Modul- Struktur /Online-Dokumentati on/Steuermodul e - Onli ne-D okumentation (--> Für all e D okumente <--)/++++++++++++ Seitenumbruch ++++++++++++ @ 9\mod_1268898668093_0.docx @ 52149 @ @ 1

ABB-Welcome

| — 10 —

Pos: 26 /DinA4 - Anl eitungen Onli ne/Ueberschrif ten/2./Bedi enaktionen @ 20\mod_1323262294281_15.docx @ 111911 @ 2 @ 1

4.2 Control actions Pos : 27 /DinA4 - Anl eitungen Onli ne/Ueberschrif ten/3./Sprech- und Videover bindung @ 20\mod_1323262368700_15.docx @ 111927 @ 3 @ 1

4.2.1 Incoming call / During a call Pos : 28 /DinA4 - Anl eitungen Onli ne/Inhalt/KN X/D oor Entr y/83220-AP- xxx/Sprech- und Videover bindung - 83220- AP- xxx @ 20\mod_1323262341852_15.docx @ 111919 @ @ 1

Fig. 3 Incoming call from Outdoor station

When Outdoor station calling, the following functions are available:

No. Function

1 Time left of the connection.

2 Number of outdoor stations.

3 Surveillance

Press this button to surveil the analog camera of the outdoor

station if there is one.

4 Snapshot

- Press this button to take a snapshot.

5 Display settings

- Press this button to enter the display settings.

6 End the connection. Pos: 29 /Busch-Jaeg er (Neustr uktur)/Modul- Struktur /Online-Dokumentati on/Steuermodul e - Onli ne-D okumentation (--> Für all e D okumente <--)/++++++++++++ Seitenumbruch ++++++++++++ @ 9\mod_1268898668093_0.docx @ 52149 @ @ 1

1

5

6 END

030s Outdoor -1

＜＞ 1-1

2

3

4

ABB-Welcome

| — 11 —

Pos: 30 /DinA4 - Anl eitungen Onli ne/Ueberschrif ten/3./Tuer oeffnen @ 20\mod_1323263277453_15.docx @ 111935 @ 3 @ 1

Fig. 5 Incoming call from Indoor station

When Indoor station calling, the following functions are available:

No. Function


2 User name

If associate the Physical address of the indoor station with a user name in

USER LIST MANAGEMENT. Here will display the user name not Physical

address or Logical address.

3 End the connection.

1

3 END

030s Indoor Jacky

2

ABB-Welcome

| — 12 —

4.2.2 Display settings during calls Pos : 31 /DinA4 - Anl eitungen Onli ne/Inhalt/KN X/D oor Entr y/83220-AP- xxx/Tuer oeffnen - 83220- AP- xxx @ 20\mod_1323267958479_15.docx @ 112109 @ @ 1

Fig. 6 Display settings during calls

The following functions are available if you press button.

No. Functions

1 Adjust the saturation of the display through the ”Plus / Minus” buttons.

2 Adjust the brightness of the display through the “Plus / Minus” buttons.

1

END

120s Outdoor -1

+

- 3

2

ABB-Welcome

| — 13 —

4.2.3 Intercept mode Pos : 31 /DinA4 - Anl eitungen Onli ne/Inhalt/KN X/D oor Entr y/83220-AP- xxx/Tuer oeffnen - 83220- AP- xxx @ 20\mod_1323267958479_15.docx @ 112109 @ @ 1

Fig. 7 Intercept mode

In the “Intercept”, the following functions are available:

No. Function

1 Activate or deactivate the intercept function by ticking the checkbox

2 Activate the intercept function to intercept calls for all users or for VIPs only

by ticking the checkbox

- ”all” means that the guard unit will intercept calls for all users..

- “VIP” means that the guard unit will intercept calls for VIPs only

3 Set VIPs (available only when there are VIPs)

- Press this button to set the VIPs.

4 Choose the type of intercept by ticking the checkbox

- “Permanent” mode and “Repeat” mode are available.

5 “Plus / Minus” buttons.

6 Back

- Press this button to return to the start page without saving the settings.

7 OK

- Press this button to save the settings.

8 In the “Repeat” mode, the timer(s) must be activated by ticking the

checkbox.

Back

INTERCEPT

× Intercept For ALL

Type Permanent

Start Time 1

× 08 30 × 18 30

Start Time 2

End Time 1

08 30 18 30

End Time 2 OK

-

+

Set VIP

1

5

2 3

8

4

7

6

ABB-Welcome

| — 14 —

- When the timer is activated, set the start time and end time via the “Plus /

Minus” buttons.

- Before adjusting to the “Hour” or “Minute”., the active range is

highlighted in blue

- End time > Start time

The function can only be set through master guard unit.

ABB-Welcome

| — 15 —

4.2.3.1 VIP settings

Press to set the VIPs,. A total of 64 entries can be added.

Fig. 8 VIP settings

The following functions are available:

No. Functions

1 Select “User Name”, press “Add“ button, and then you can add

new VIPs by user name (from the contact lists).

2 Select “Physical Address”, press “Add“ button, and then you can add new

VIPs by their physical address.

3 “VIP”

- Press the “VIP” button to check the VIP list .

4 “Add”

- Press the “Add” button to add new VIPs.

5 “Back”

- Press the “Back” button to return to the “Intercept” page.

6 “Scroll”

- Switch to other settings by ticking the scroll box.

Set VIP

Back

User Name

Add

VIP

6

1

4

5

Physical Address 3

VIP SETTING

2

ABB-Welcome

| — 16 —

Press to set VIPs.

Fig. 9 VIP list

The “VIP list” menu has the following functions:

No. Functions

1 VIP list

- Displays all VIPs.

2 “View”

- Press this button to display specific information of the selected VIP.

3 “Delete”

- Press this button twice to delete the selected VIP.

4 “Back”

- Press this button to return to the VIP settings menu.

VIP

Back

VIP List

Alexander.G

Delete

View

1

3

4

Bodin.K 2

1/5

Christian.G

Elizabeth.G

Tom

ABB-Welcome

| — 17 —

Select “Physical address” and press the “Add” button to enter “Add” menu.

Fig. 10 Add VIPs by physical address

No. Functions

1 Enter a physical address with the numeric keypad.

2 “Add”

- Press this button to add a new VIP. Enter the correct physical address

before pressing this button.

3 “Back”

- Press this button to return to the VIP settings menu.

Back

VIP SETTING

Add

1

2

3

ABB-Welcome

| — 18 —

4.2.4 Communication Pos : 31 /DinA4 - Anl eitungen Onli ne/Inhalt/KN X/D oor Entr y/83220-AP- xxx/Tuer oeffnen - 83220- AP- xxx @ 20\mod_1323267958479_15.docx @ 112109 @ @ 1

Fig. 11 Call indoor station

The “call indoor station” menu has the following functions:

No. Functions

1 Click on the “Call indoor station”.

2 Enter a physical address or logic address to make a call to an indoor

station. (select physical address or logic address from the call settings)

3 “Contact”

Press “Contact” button to display the contact list, and make a call directly

by user name.

4 “Call”

- Press this button to make a call after you enter the number.

5 “Back”

- Press this button to return to the start page.

Back

CALL INDOOR STATION

Call

2

4

5

Contact

1

3

ABB-Welcome

| — 19 —

Fig. 12 Call to Indoor station

When GU call to Indoor station, the following functions are available:

No. Function


2 User name

If associate the Physical address of the indoor station with a user name in

USER LIST MANAGEMENT. Here will display the user name not Physical

address or Logical address.

3 If Indoor station answers the call, Guard unit will display “enable”, when

press “Enable”, Guard unit will send the image from associated Camera

interface to

indoor station and Guard unit itself.

4 End the connection.

1

4 END

113s Indoor Jacky

2

Enable 3

ABB-Welcome

| — 20 —

Fig. 13 Call guard unit

The “Call guard unit” menu has the following functions:

No. Functions

1 Click on the “Call guard unit.

2 Enter a guard unit address.

If the called guard unit is in the same building, press number 1~9 to make

a call.

If the called guard unit is not in the same building, press the building

number + guard unit address to make a call, e.g. building No.(1~60)+guard

unit address (1~9).

3 “Call”

- Press this button to make a call after you enter the number.

4 “Back”


Back

CALL GUARD UNIT

Call

2

3

4

1

ABB-Welcome

| — 21 —

4.2.5 Surveillance Pos : 31 /DinA4 - Anl eitungen Onli ne/Inhalt/KN X/D oor Entr y/83220-AP- xxx/Tuer oeffnen - 83220- AP- xxx @ 20\mod_1323267958479_15.docx @ 112109 @ @ 1

Fig. 14 Surveillance

Press button to survey the default outdoor station. The following functions are available:

No. Functions

1 Press this button to survey the next outdoor station.

2 Use the handset to establish an audio connection with the current outdoor

station under connection.

END

015s Outdoor -1

＜＞ 1-1 1

ABB-Welcome

| — 22 —

4.2.6 Switch actuator Pos : 31 /DinA4 - Anl eitungen Onli ne/Inhalt/KN X/D oor Entr y/83220-AP- xxx/Tuer oeffnen - 83220- AP- xxx @ 20\mod_1323267958479_15.docx @ 112109 @ @ 1

Fig. 15 Switch actuator

The “Switch actuator”, menu has the following function:

No. Functions

1 Actuator list

- Establish an actuator list by clicking on “system settings (advance) -

switch actuator“ in turn.

2 “Enable”

- Press this button to activate the selected actuator.

3 “Back”


Back

SWITCH ACTUATOR

Enable

Actuator 1 (001) 1/1

3

4

2

ABB-Welcome

| — 23 —

4.2.7 User list Pos : 31 /DinA4 - Anl eitungen Onli ne/Inhalt/KN X/D oor Entr y/83220-AP- xxx/Tuer oeffnen - 83220- AP- xxx @ 20\mod_1323267958479_15.docx @ 112109 @ @ 1

Fig. 16 User list

The “Contact” menu has the following functions:

No. Functions

1 “Search box”

- Search a user name by entering a few letters of the first name.

2 “Contact list”

- Lists contacts.

3 “Call”

- Press this button to call the selected contact..

4 “View”

- Show specific information of the selected contact.

5 “Back”


Back

SWITCH ACTUATOR

View

Alexander.G

1/5

4

5

1

Call Bodin.K

Christian.G

Elizabeth.G

Tom

2

3

ABB-Welcome

| — 24 —

Press the “View” button to show specific information from the contact list.

Fig. 17 Specific information in the contact list

Back

CONTACT

User Name

Logic Address

Physical Address

Alexander.G

00000301

00001

ABB-Welcome

| — 25 —

4.2.8 History Pos : 31 /DinA4 - Anl eitungen Onli ne/Inhalt/KN X/D oor Entr y/83220-AP- xxx/Tuer oeffnen - 83220- AP- xxx @ 20\mod_1323267958479_15.docx @ 112109 @ @ 1

Fig. 18 History

The “History” menu has the following functions:

No. Functions

1 Click on “History”.

2 Up to 100 events can be recorded in the “history menu”.

- If there is a snapshot function that is active, a icon is enabled. If In case

there is no snapshot function,

this icon is disabled.

- Date, time and event type are recorded together with the

snapshot.

- Directions: means dialing calls

means receiving calls

means missing calls

3 “Delete”

- Press this button to delete the selected call from the history.

4 “Call”

- Press this button to call back the selected call from the indoor station.

5 “OK”

- Press this button to view the specific information.

6 “Back”


Back

HISTORY

OK

2013-03-21 16:45

1/15

5

6

2

Call 4

Outdoor-1

2013-03-21 16:45

Outdoor-1

2013-03-21 14:24

Outdoor-1

Delete

1

3

ABB-Welcome

| — 26 —

Press the “OK” button to view specific information.

Fig. 19 Specific history information

No. Functions

1 Press the “Plus / Minus“ button to view the previous or the next photo.

2 “Delete”

- Press this button twice to delete the photo.

3 “Back”

- Press this button to return to the “History” menu.

Fig. 20 Alarm history

3

Outdoor 1

1/2

Back

Delete

-

+ 1

2

Back

ALARM HISTORY

Call

2013-03-21 16:45

1/15

3

4

2

2013-03-21 16:45

Outdoor 01-1

2013-03-21 14:24

1

Outdoor 01-1

Indoor 01-003

ABB-Welcome

| — 27 —

The “Alarm History” menu has the following functions:

No. Functions

1 Click on ”Alarm History ”.

2 Up to 500 alarms can be recorded in the ”Alarm History ” menu.

- Date and time of an alarm are recorded together with the event.

3 “Call”

- Press this button to call back the selected call from the history

4 "Back”


Pos: 32 /Busch-Jaeg er (Neustr uktur)/Modul- Struktur /Online-Dokumentati on/Steuermodul e - Onli ne-D okumentation (--> Für all e D okumente <--)/++++++++++++ Seitenumbruch ++++++++++++ @ 9\mod_1268898668093_0.docx @ 52149 @ @ 1 Pos : 33 /DinA4 - Anl eitungen Onli ne/Ueberschrif ten/3./Stumm schalten @ 20\mod_1323263607142_15.docx @ 111951 @ 3 @ 1 Pos : 66 /Busch-Jaeg er (Neustr uktur)/Modul- Struktur /Online-Dokumentati on/Steuermodul e - Onli ne-D okumentation (--> Für all e D okumente <--)/++++++++++++ Seitenumbruch ++++++++++++ @ 9\mod_1268898668093_0.docx @ 52149 @ @ 1

ABB-Welcome

| — 28 —

4.2.9 Settings (Basic) Pos : 31 /DinA4 - Anl eitungen Onli ne/Inhalt/KN X/D oor Entr y/83220-AP- xxx/Tuer oef fnen - 83220- AP- xxx @ 20\mod_1323267958479_15.docx @ 112109 @ @ 1

4.2.9.1 Ringtone settings

Fig. 21 Ringtone settings

The “Ringtone” menu has the following functions:

No. Functions

1 Press the “Plus / Minus” button to select a bell sound for calls from outdoor

stations.

2 Press the “Plus / Minus” button to select a bell sound for calls from indoor

stations.

3 Press the “Plus / Minus” button to select a bell sound like an apartment

door bell ..

4 Press the “Plus / Minus” button to select a bell sound for calls coming from

other guard units

5 “OK”


6 “Back”


Back

RINGTONE

Outdoor Ring Tone 1

OK

-

+

1 2

4

5

6

Indoor Ring Tone 2

Doorbell Ring Tone 3

Guard Unit Ring Tone 4

3

ABB-Welcome

| — 29 —

4.2.9.2 Volume settings

Fig. 22 Volume settings

The “Volume” menu has the following functions:

No. Functions

1 “Ringtone volume”

- Press the “Plus / Minus” button to set the volume of the bell sound.

2 “Touch button tone”

- Enable/disable the feedback tone which sounds when the touch button is

pressed.

3 “Touch screen tone”

- Enable/disable the feedback tone which sounds when the touch screen is

pressed.

4 The ringtone can be set fixed or cycled.

5 “OK”


6 “Back”

- Press this button to return to the start page

Back

VOLUME

Ringtone Volume Volume 3

OK

-

+

1

3

5

6

Touchbutton Tone √

Touchscreen Tone √

2

√

Repeated Tone

4

ABB-Welcome

| — 30 —

4.2.9.3 Date and time settings

Fig. 23 Date and time settings

The “Date and time” menu has the following functions:

No. Functions

1 “Date”

- Press the “Plus / Minus” button to set date.

2 “Time”

- Press the “Plus / Minus” button to set time .

3 “Summertime”

- Enable/disable the summertime by ticking the checkbox.

4 “OK”


5 “Back”


Back

DATE AND TIME

2013 Date(YYYY-MM-DD)

Time

OK

-

+

3

4

5

Summer Time

01 01

19 04

√

1

2

ABB-Welcome

| — 31 —

4.2.9.4 Other settings

Fig. 24 Other settings

The “Other settings” menu has the following functions:

No. Functions

1 “Auto full screen”

- Enable/disable the auto full screen function by ticking the checkbox or

pressing the “Plus / Minus” buttons.

2 “Auto snapshots”

- Enable/disable the auto-snapshots function by ticking the checkbox

(automatic switchover) or pressing the “Plus / Minus” buttons.

3 “Calibrate”

- If the buttons and the associated graphics on the display are no longer

superimposed, the monitor must be calibrated.

- Press the “calibrate" button and then confirm that the dialogue box is

displayed. Tick the 5 displayed position dots consecutively. Finally,

confirm that the dialogue box displayed.

Then, the calibration of the display is finished.

4 “OK”


5 “Back”


Back

OTHER SETTINGS

× Auto Full Screeen

Auto-Snapshots

OK

-

+

2

4

5

√

1

Calibrate 3

ABB-Welcome

| — 32 —

4.2.9.5 Language settings

Fig. 25 Language settings

The “Language” menu has the following functions:

No. Functions

1 Languages (list box)

- Here, the available languages are listed.

- The current language is marked with a dot.

2 “OK”


3 “Back”


Back

LANGUAGE

OK 2

3

1 English

Française

Italiano

Español

Português

Česky

ABB-Welcome

| — 33 —

4.2.9.6 Information

Fig. 26 System information

Display the current version and the address of this guard unit (scanning the QR code to get the specific instructions for this guard unit)

Back

INFORMATION

Flash Version:

MCU Version:

Guard Unit Add.:

Default Outdoor:

V2.07_150625

V2.07_150626 01

01

Master

ABB-Welcome

| — 34 —

4.2.10 Settings (Advanced)

Enter the system password to access the advance settings.

The default password is 345678.

Fig. 27 Password

Enter Password to Access the Menu

Back

OK

ABB-Welcome

| — 35 —

4.2.10.1 Switch actuator settings

Fig. 28 Switch actuator settings

The “Switch actuator” menu has the following functions:

No. Functions

1 Actuator (list box)

- Here, the available actuators are listed.

2 “Add”

- Press this button to add a new actuator.

A total of up to 10 switch actuators can be added.

3 “Modify”

- Press this button to modify existing actuator entries.

4 “Delete”

- Press this button twice to delete an actuator.

5 “Back”


Back

SWITCH ACTUATOR

Actuator 1(001)

Delete

Modify

Add

4

5

1 2

3

ABB-Welcome

| — 36 —

Press the “Add” button to add a new actuator

Fig. 29 Switch actuator settings

The “Add” button has the following functions:

No. Functions

1 To add a new actuator list

- Change the target address by scrolling up from 001 to 199 with the “Plus

/ Minus” buttons

2 “OK”


3 “Rename”

- Press this button to rename the actuator.

4 “Back”


4 Back

Rename

-

+

3

SWITCH ACTUATOR

Relay actuator 002

OK

1

2

ABB-Welcome

| — 37 —

4.2.10.2 Program button settings

Fig. 30 Program button settings

The “Program button” has the following functions:

No. Functions

1 Button 1

- Set the program function button by using the “Plus / Minus” buttons.

- Functions such as. “release 2nd-lock” and “enable switch actuator” are

available

- “2nd-lock” means that the lock is connected with an outdoor station (NC-

NO-COM)

- Only the existing switch actuator list can be available with the program

button.

2 “OK”


3 “Back”


Back

PROGRAM BUTTON

Release 2nd-lock

OK

-

+

2

3

1 Button 1

Button 2

Button 3

None

None

ABB-Welcome

| — 38 —

4.2.10.3 User list management

Fig. 31 User list management

The “Program button” menu has the following functions:

No. Functions

1 “User name”

- Add a contact list by user name.

2 “Logic address”

- Add a contact list by logic address, e.g. your apartment No. 0101.

3 “Add”

- Press this button to add a new contact list.

4 “Edit”

- Press this button to edit an existing contact list.

5 “Back”


Back

USER LIST MANAGEMENT

User Name

Edit

Add

4

5

1

Logic Address 2

3

ABB-Welcome

| — 39 —

Add a new contact list by user name:

Fig. 32 User name

Press the “Add” button to add a new user name. The following functions are available:

No. Functions

1 Enter the physical address and user name when adding a new contact list.

- Physical address: the address of an indoor station, from 001 to 250,

which is an internal code sent through the bus and identified by all

devices within of the system. (Set by using the switches X100,X10,X1 of

the indoor station)

- User name: Name of a resident.

2 “OK”


3 “Back”


3 Back

OK

2


Physical Address

1

User Name

ABB-Welcome

| — 40 —

Edit a contact list:

Fig. 33 Editing a user name

Edit the user name. The following functions are available:

No. Functions

1 Search box

- Search for user name by entering a few letters of the first name.

2 User name (list box)

- Here, the available user names are listed.

3 “Modify“

- Change the specific information of existing user names.

4 “Delete“

- Delete a user name by clicking on this button twice.

5 “Back”


Back


Delete

Alexander.G

1/5

4

5

1

Modify Bodin.K

Christian.G

Elizabeth.G

Tom

2

3

ABB-Welcome

| — 41 —

Add or edit a new contact list by logic address:

Fig. 34 User list management

Edit or add a logic address. The following functions are available:

No. Functions

1 Enter the physical address and user logic address when adding a new

contact list.

- Physical address: the address of an indoor station, from 001 to 250,

which is an internal code sent through the bus and identified by all

devices within the system. (Set by using switches X100,X10,X1 of the

indoor station)

- Logic address: the code that visitors enter when calling a resident.

Usually, the logic address is the apartment No. of a resident which is

different from the physical address.

2 “OK”


3 “Back”


3 Back

OK

2


Physical Address

1

Logic Address

ABB-Welcome

| — 42 —

4.2.10.4 Call code settings

Fig. 35 Call code settings

To the “Call code settings” menu has the following functions:

No. Functions

1 Code type

- Change the code type by ticking the box (automatic switchover) or

pressing the “Plus / Minus” buttons.

- A user can select and click on a physical address to call an indoor

station.

- A user can select and click on a logic address (The logic address is set in

the “user list management” menu).

2 Digit

- When choosing a logic address, you should set the digits of the logic

address by using the “Plus / Minus” buttons. (01-08 digits are available,

and the digits of the logic address must be consistent with the ones set in

the “user list management” menu)

3 “OK”


4 “Back”


Back

CALL CODE SETTING

Physical Address

OK

-

3

4

1

2

Code Type

05 Digit

+

ABB-Welcome

| — 43 —

4.2.10.5 Password settings

Fig. 36 Password settings

The “Password settings” menu has the following functions:

No. Functions

1 Enter a new system password. The password must include 6 digits.

2 “OK”


3 “Back”


Back

PASSWORD SETTING

OK 2

3

1

Enter New Password

Enter Password Again

ABB-Welcome

| — 44 —

4.2.10.6 Reset factory default

Fig. 37 Reseting factory default

To the “Reset factory default” menu has the following functions:

No. Functions

1 “OK”


2 “Back”


Back

RESET FACTORY DEFAULT

OK 1

2

Are you sure to reset?

ABB-Welcome

| — 45 —

4.2.10.7 Reset Password & Clear All Data

If you forget the system password, you should enter the engineer mode to reset the system

password.

Hold ”0” while pressing “11411” to enter the engineer mode within 120s when guard unit is

powered on.

Fig. 38 Resetting password & Clearing all data

In the engineer mode, you can also clear all data in the menu, including the switch actuator

lists, user lists, history, etc.

Fig. 39 Resetting password & Clearing all data

Pos: 67 /DinA4 - Anl eitungen Onli ne/Ueberschrif ten/2./Rei nigung @ 19\mod_1310733980533_15.docx @ 107853 @ 2 @ 1

Enter Password to Access the Menu

Back

OK

Back

Reset Password Clear All Data

ABB-Welcome

| — 46 —

4.3 Cleaning Pos : 68 /DinA4 - Anl eitungen Onli ne/Inhalt/KN X/D oor Entr y/Rei nigung/Rei nigung Touchscreenmonitor @ 19\mod_1310734108978_15.docx @ 107862 @ @ 1

Caution

Risk of damage to the screen surface.

The screen surface can be damaged by hard or sharp objects!

Never use such objects for entries on the touch screen monitor.

– Use your finger or a plastic stylus.

The screen surface can be damaged by cleaning fluids or abrasive

agents!

– Clean the surfaces using a soft cloth and commercially available

glass cleaner.

– Never use abrasive cleaning agents.


ABB-Welcome

| — 47 —

Pos: 70 /DinA4 - Anl eitungen Onli ne/Ueberschrif ten/2./Geraeteei nstellungen @ 18\mod_1302768847744_15.docx @ 103548 @ 2 @ 1

4.4 Adjusting the device Pos : 71 /DinA4 - Anl eitungen Onli ne/Ueberschrif ten/3./Abschlusswiderstand @ 19\mod_1321958079906_15.docx @ 110083 @ 3 @ 1 Pos : 72 /DinA4 - Anl eitungen Onli ne/Inhalt/KN X/D oor Entr y/Bedienung/Abschl usswiderstand setzen 83220-AP- xxx @ 19\mod_1310723392369_15.docx @ 107841 @ @ 1

Fig. 40: Pos : 74 /DinA4 - Anl eitungen Onli ne/Inhalt/KN X/D oor Entr y/Bedienung/Master/Sl ave Schalter setzen 83220-AP- xxx @ 19\mod_1310723320966_15.docx @ 107833 @ @

1. Station

Jumper to set the address of default outdoor station

2. X1

Jumper to set the address of the guard unit

3. Master /Slave function

Only one guard unit in each building must be set as "Master" (Jumper should be set

as 'M/S on'). All other guard units in the same building must be set as "Slave"

(Jumper should be set as 'M/S off').

4. Terminal resistor

In video installations or mixed audio and video installations, the Jumper must be

set as 'RC on' on the last device of the line.

5. a b = Bus connection

= Door bell connection

DC GND = Additional power supply

6. USB connector

USB connector for the connection to the PC: download/upload the configuration.

e.g. download the contact lists.

Pos: 75 /Busch-Jaeg er (Neustr uktur)/Modul- Struktur /Online-Dokumentati on/Steuermodul e - Onli ne-D okumentation (--> Für all e D okumente <--)/++++++++++++ Seitenumbruch ++++++++++++ @ 9\mod_1268898668093_0.docx @ 52149 @ @ 1 Pos : 76 /DinA4 - Anl eitungen Onli ne/Ueberschrif ten/1./Technische D aten @ 18\mod_1302615863001_15.docx @ 103416 @ 1 @ 1

ABB-Welcome

| — 48 —

5 Technical data Pos : 77 /DinA4 - Anl eitungen Onli ne/Inhalt/KN X/D oor Entr y/83220-AP- xxx/Technische D aten - 83220-AP- xxx @ 18\mod_1303212854559_15.docx @ 103705 @ @ 1

Designation Value

Display resolution: 480 x 272

Display size: 4.3”

Operating temperature -10° C to +55° C

Storage temperature -40° C – +70° C

Protection IP 30

Single-wire clamps 2 x 0.28 mm² – 2 x 0.75 mm²

Fine-wire clamps 2 x 0.28 mm² – 2 x 0.75 mm²

Bus voltage 20-30 V

Size 144 x 198 x 45 mm


ABB-Welcome

| — 49 —

Pos: 79 /Busch-Jaeg er (Neustr uktur)/Modul- Struktur /Online-Dokumentati on/Überschriften (--> Für alle D okumente <--)/1. Ebene/M - O/Montage / Installation @ 18\mod_1302613966111_15.docx @ 103373 @ 1 @ 1

6 Mounting / Installation Pos : 80 /Busch-Jaeg er (Neustr uktur)/Modul- Struktur /Online-Dokumentati on/Sicherheit (--> Für alle Dokumente <--)/Warnhinweise/Sicherheit - Ni ederspannungs- und 230 V-Leitungen @ 18\mod_1302617821491_15.docx @ 103465 @ @ 1

Warning

Electric voltage!

Risk of death and fire due to electrical voltage of 100-240 V.

– Low-voltage and 100-240 V cables must not be installed together in

a flush-mounted socket!

In case of a short-circuit there is the danger of a 100-240 V load on

the low-voltage line.

Pos: 81 /Busch-Jaeg er (Neustr uktur)/Modul- Struktur /Online-Dokumentati on/Sicherheit (--> Für alle Dokumente <--)/Warnhinweise/Sicherheit - Fachkenntnisse @ 18\mod_1302774384017_15.docx @ 103564 @ 2 @ 1

6.1 Requirements for the electrician

Warning

Electric voltage!

Install the device only if you have the necessary electrical engineering

knowledge and experience.

• Incorrect installation endangers your life and that of the user of the

electrical system.

• Incorrect installation can cause serious damage to property, e.g.

due to fire.

The minimum necessary expert knowledge and requirements for the

installation are as follows:

• Apply the "five safety rules" (DIN VDE 0105, EN 50110):

1. Disconnect from power;

2. Secure against being re-connected;

3. Ensure there is no voltage;

4. Connect to earth;

5. Cover or barricade adjacent live parts.

• Use suitable personal protective clothing.

• Use only suitable tools and measuring devices.

• Check the type supply network (TN system, IT system, TT system)

to secure the following power supply conditions (classic connection

to ground, protective earthing, necessary additional measures,

etc.). Pos: 82 /DinA4 - Anl eitungen Onli ne/Inhalt/KN X/D oor Entr y/Montage/M ontagehinweise - Allgemein @ 19\mod_1310563670478_15.docx @ 107743 @ 2 @ 1

ABB-Welcome

| — 50 —

6.2 General installation instructions

• Terminate all branches of the wiring system via a connected bus device (e.g.,

indoor station, outdoor station, system device).

• Do not install the system controller directly next to the bell transformer and other

power supplies (to avoid interference).

• Do not install the wires of the system bus together with 100-240 V wires.

• Do not use common cables for the connecting wires of the door openers and wires

of the system bus.

• Avoid bridges between different cable types.

• Use only two wires for the system bus in a four-core or multi-core cable.

• When looping, never install the incoming and outgoing bus inside the same cable.

• Never install the internal and external bus inside the same cable. Pos: 83 /Busch-Jaeg er (Neustr uktur)/Modul- Struktur /Online-Dokumentati on/Steuermodul e - Onli ne-D okumentation (--> Für all e D okumente <--)/++++++++++++ Seitenumbruch ++++++++++++ @ 9\mod_1268898668093_0.docx @ 52149 @ @ 1

ABB-Welcome

| — 51 —

Pos: 84 /Busch-Jaeg er (Neustr uktur)/Modul- Struktur /Online-Dokumentati on/Überschriften (--> Für alle D okumente <--)/2. Ebene/M - O/Montage @ 18\mod_1302615960458_15.docx @ 103424 @ 2 @ 1

6.3 Mounting Pos : 85.1 /DinA4 - Anl eitungen Onli ne/Inhalt/KN X/DoorEntr y/83220-AP- xxx/M ontag e - M odul e/Montage - Montagedose -- 83220-AP- xxx @ 19\mod_1323250406848_15.docx @ 111098 @ @ 1

Recommended installation height

Dismantling

Open the housing panel by pulling the clamp on the bottom of the device.

Installation size

ABB-Welcome

| — 52 —

1. The bottom of the device has screw holes and thus can be fastened on the wall

according to the above dimension instructions.

2. The bottom of the device can be fixed at the existing flush-mounted box. The size

of the compatible flush-mounted box is shown in the above figures.

Wiring

Fix the bottom of the device and connect it with reference to the figures. The insulated

section of the cable end must not be longer than 10mm.

Settings

Set the addresses of the preferred outdoor stations and the addresses of the indoor

stations on the jumper (see chapter " Adjusting the device ").

ABB-Welcome

| — 53 —

Mounted on the wall

1. Affix the bottom of the device to the wall.

2. Latch the upper part of the device onto its bottom part , place the upper side of the

device on the lock-in lugs and then press the bottom side onto the bottom part of

the device until it is caught by the clamp,

Mounted with flush-mounted box

1. Affix the bottom of the device to the existing flush-mounted box.

2. Latch the upper part of the device onto its bottom part: place the upper side of the


the device until it is caught by the clamp.

ABB-Welcome

| — 54 —

Mounted with desktop bracket

1. Fix the bottom of the device to the desktop bracket.

2. Latch the upper part of the device onto its bottom part : place the upper side of the


the device until it is caught by the clamp.

The installation of the indoor station is now complete. Pos: 94 /Busch-Jaeg er (Neustr uktur)/Modul- Struktur /Online-Dokumentati on/Steuermodul e - Onli ne-D okumentation (--> Für all e D okumente <--)/++++++++++++ Seitenumbruch ++++++++++++ @ 9\mod_1268898668093_0.docx @ 52149 @ @ 1

ABB-Welcome

Pos: 95 /DinA4 - Anl eitungen Onli ne/Inhalt/KN X/D oor Entr y/Pr ojektier ung-Mer kblatt/Proj ekti erPos: 97 /Busch-Jaeger (Neus truktur)/M odul-Str uktur/Online-Dokumentation/R ückseiten (--> Für alle D okumente <--)/Rückseite - Busch-Jaeger - Allgemein @ 20\mod_1327320074886_15.docx @ 137103 @ @ 1

Notice === Ende der Liste für Textmar ke Backcover ===

We reserve the right to at all times make technical changes as well as changes to the

contents of this document without prior notice.

The detailed specifications agreed to at the time of ordering apply to all orders. ABB

accepts no responsibility for possible errors or shortcoming in this document .

We reserve all rights to this document and the topics and illustrations contained therein.

The document and its contents, or extracts thereof, must not be reproduced, transmitted

or reused by third parties without prior written consent by ABB.

abb-welcome m2303 guard unit · pdf file4.1.2 welcome screen and status bar fig. 2 start on...

Documents