a4 8pp alum lite · 2016-02-08 · teco motor products and publications tefc aluminium squirrel...

Advantage Lite IIALUMINIUMTotally enclosed fan cooled squirrel cage induction motors

ENGINEERING THE FUTURE

TE

CO

Mo

tor

pro

du

cts

and

p

ub

licat

ion

s

TEFC Aluminium squirrel cage induction motorsdesigned, manufactured and tested to meet thelatest European and International Standards. Withtheir proven high quality and adaptable aluminiumconstruction, they are ideally suitable for allindustrial markets.

Features:• Multi-Mount• Lightweight

ELECTRICAL SUPPLY AND RATINGSAll motors work with either Delta or Star configurations.

ENCLOSUREThe standard protection is to IP55 for B3 (IM1001) orB3/B5 (IM2001) mounting.

DUTY RATINGAll motors are continuously maximum rated type S1.However, all motors can operate continuously with a10% overload if the Class F temperature rise isacceptable.

AMBIENTStandard motors are designed to operate in anambient temperature of -15 C̊ to 40 C̊.

ALTITUDEStandard motors are designed for operation andperformance at an altitude not exceeding 3,300 feet(1,000 metres) above sea level. For higher altitudesderating of output kW may be necessary.

Advantage ALUMINIUM

MOTORS• Low voltage induction motors – IEC and NEMA• High voltage induction motors• Drip proof motors • DC motors• Synchronous motors• Vertical hollow shaft motors• Hazardous area motors• Smoke extraction motors• High efficiency motors• Brake motors

INVERTER DRIVES• Minicon and Minicon Plus (IP65)• Speecon 7200GA (general purpose)• Speecon 7200GS (sensorless vector)• Speecon 7200PA (HVAC, pump, fan)• Speecon 7300CV (sensorless vector, PLC function)

TECO PRODUCTSkW Volts Connection Hz

_<2.2 220/240 � 50250/280 � 60380/415 Y 50440/480 Y 60

3>_ 380/415 � 50440/480 � 60660/690 Y 50

2

Ad

vantag

e Lite II

Intro

du

ction

PERFORMANCEAll standard motors are designed to meet IEC 60034-12 design N performance requirements.

DIRECTION OF ROTATIONAll standard motors are suitable for operation ineither direction of rotation.

MOUNTINGMotors are available in the following mounting types:Foot mount horizontal shaft (B3)Flange mount (B5 or V1)Foot and flange mount (B3/5)Face mount (B14)

FRAMES AND ENDSHIELDSStator frames are made from a high-grade aluminiumalloy. End shields are of die cast aluminium alloy withsteel liner for bearing housing .

FAN AND FAN COWLPolypropylene fans are fitted with key as standard.Fan cowls are of heavy gauge pressed steelconstruction, securely bolted to the motor endshield.

BEARING AND LUBRICATION SYSTEMStandard motors are fitted with high quality pre-lubricated double shielded ball bearings.

ROTOR ASSEMBLYThe rotor core consists of high grade insulated coldrolled electromagnetic steel laminations with apressure die-cast high conductivity aluminium cage.Integrally cast with the cage are wafter blades andbalance weight supports. The whole assembly is thendynamically balanced.

STATOR, WINDING AND CLASS FINSULATION SYSTEMStator laminations are built of high grade, insulatedcold rolled electromagnetic steel for high efficiency.Coil wires are insulated with a heavy build heat-resistant polyester coating. Connections are insulatedwith cross-linked silicone rubber braid. The completewinding is dipped in Class F varnish and baked to cure.External winding flexible leads are cross-linkedsilicone rubber insulated.

NAMEPLATENameplates are made from stainless steel.

TERMINAL BOXTerminal boxes are generously proportioned androtatable 4 x 90-degree increments and contain a 6terminal connection block and earth terminal directlyconnected to the frame in compliance with relevantEuropean Directives. Boxes are gasketed betweenframe, box, cover and gland plate for IP55 protection.The terminal box located on the top of the frame asstandard. The multi-mount design allows the terminalbox to be fixed in three separate positions givingcomplete user adaptability.

PAINT FINISHPhenolic basic + lacquer surface finished in blue –providing a high corrosion resistant protection.

TESTINGIn addition to a full programme of tests duringmanufacture, each motor undergoes an automaticroutine test to EN60034-1 and BS4999 prior todespatch.

OPTIONSThe following additional options are available:• IP56, IP65 enclosure• Class ‘H’ insulation• Anti-condensation heaters• Thermistor protection• Tropicproofing• Special paint finishes• Brake kits available• Special shaft extensions• Dual speed• Stainless steel hardware• Encoder/Tacho• Force Ventilation kits• Oversize terminal box

NOTES 1. All data is subject to change without prior notification. 2. Not to be used for installation purposes without

referring to Teco Electric Europe Limited.

Lite II

3

Per

form

ance

Dat

a

400V 50Hz – Synchronous Speed 3000 r/min (2 poles)

0.18 2720 D63 0.53 0.50 0.49 65.0 64.0 60.0 0.90 0.73 0.66 5.5 0.61 2.2 2.2 0.00031 58 4.8

0.25 2720 D63 0.69 0.66 0.63 68.0 68.5 66.0 0.81 0.74 0.67 5.5 0.96 2.2 2.2 0.00060 58 5.1

0.37 2740 D71 0.99 0.94 0.91 70.0 71.0 68.5 0.81 0.75 0.66 6.1 1.26 2.2 2.2 0.00075 61 6.0

0.55 2740 D71 1.40 1.33 1.28 73.0 73.0 69.5 0.82 0.76 0.69 6.1 1.88 2.2 2.3 0.00090 61 6.5

0.75 2840 D80 1.83 1.73 1.68 75.0 75.7 72.3 0.83 0.78 0.67 6.1 2.54 2.2 2.3 0.00120 64 8.7

1.1 2840 D80 2.58 2.30 2.36 78.0 80.0 78.2 0.84 0.82 0.72 7.0 3.72 2.2 2.3 0.00140 64 9.5

1.5 2840 D90S 3.43 2.90 3.14 80.4 80.2 77.3 0.84 0.80 0.70 7.0 5.04 2.2 2.3 0.00290 69 11.8

2.2 2840 D90L 4.85 4.10 4.44 82.0 82.7 81.6 0.85 0.84 0.74 7.0 7.40 2.2 2.3 0.00550 69 13.5

3 2860 D100L 6.31 5.50 5.78 83.5 83.4 81.3 0.88 0.85 0.76 7.5 9.95 2.2 2.3 0.01090 73 21.0

4 2880 D112M 8.10 7.10 7.42 85.7 85.5 83.5 0.88 0.85 0.76 7.5 13.22 2.2 2.3 0.01260 74 28.0

5.5 2900 D132S 11.00 9.70 10.00 86.9 84.5 81.5 0.88 0.88 0.82 7.5 18.11 2.2 2.3 0.03770 77 39.0

7.5 2900 D132S 14.90 12.90 13.60 88.0 86.9 85.3 0.88 0.89 0.84 7.5 24.70 2.2 2.3 0.04990 77 44.5

11 2930 D160M 20.80 18.70 19.00 89.3 88.2 84.7 0.90 0.86 0.79 7.5 35.85 2.2 2.3 0.05500 83 69.2

15 2930 D160M 28.10 25.10 25.70 90.2 89.8 89.3 0.90 0.87 0.80 7.5 48.89 2.2 2.3 0.07500 83 78.0

18.5 2930 D160L 34.00 30.80 31.10 91.0 90.6 89.6 0.91 0.87 0.80 7.5 60.30 2.2 2.3 0.12400 83 88.5


0.12 1310 D63 0.44 0.40 0.40 57.0 58.2 54.0 0.72 0.63 0.57 4.4 0.84 2.1 2.2 0.00050 48 4.8

0.18 1310 D63 0.62 0.60 0.57 60.0 60.9 55.5 0.73 0.65 0.57 4.4 1.26 2.1 2.2 0.00060 48 5.1

0.25 1330 D71 0.79 0.70 0.72 65.0 65.4 60.0 0.74 0.65 0.58 5.2 1.73 2.1 2.2 0.00080 53 6.0

0.37 1330 D71 1.12 1.06 1.03 67.0 71.0 68.4 0.75 0.65 0.52 5.2 2.56 2.1 2.2 0.00130 53 6.3

0.55 1390 D80 1.57 1.49 1.44 71.0 72.6 69.0 0.75 0.66 0.55 5.2 3.75 2.4 2.3 0.00180 58 9.4

0.75 1390 D80 2.03 1.93 1.86 73.0 74.2 70.0 0.76 0.65 0.54 6.0 5.11 2.3 2.3 0.00210 58 10.8

1.1 1390 D90S 2.89 2.30 2.65 75.0 75.8 75.0 0.77 0.70 0.57 6.0 7.50 2.3 2.3 0.00230 59 12.0

1.5 1390 D90L 3.70 3.10 3.39 78.0 78.1 76.7 0.79 0.75 0.64 6.0 10.23 2.3 2.3 0.00270 59 13.8

2.2 1410 D100L 5.16 4.40 4.72 80.0 81.0 81.1 0.81 0.76 0.65 7.0 14.80 2.3 2.3 0.00540 61 20.8

3 1410 D100L 6.78 5.80 6.21 82.0 83.2 81.6 0.82 0.78 0.66 7.0 20.18 2.3 2.3 0.00670 61 23.5

4 1435 D112M 8.80 7.80 8.10 84.0 84.8 82.7 0.82 0.76 0.64 7.0 26.53 2.3 2.3 0.00950 62 29.5

5.5 1440 D132S 11.00 10.70 10.80 85.0 86.8 85.6 0.83 0.81 0.71 7.0 36.48 2.3 2.3 0.02140 69 41.0

7.5 1440 D132M 15.60 14.40 14.30 87.0 88.2 87.2 0.84 0.83 0.74 7.0 49.74 2.3 2.3 0.02960 69 47.5

11 1460 D160M 22.00 19.50 20.10 88.0 87.5 84.2 0.84 0.81 0.74 7.0 72.45 2.2 2.3 0.07470 72 72.5

15 1460 D160L 29.60 26.20 27.10 89.0 89.2 88.7 0.85 0.82 0.75 7.5 98.79 2.2 2.3 0.09180 72 85.6


0.09 840 D63 0.52 0.50 0.47 44.0 43.0 39.0 0.60 0.53 0.44 3.5 1.80 1.8 1.9 0.00025 48 4.8

0.12 840 D63 0.62 0.59 0.57 48.0 47.0 42.0 0.60 0.53 0.44 3.5 2.25 1.8 1.9 0.00040 48 5.1

0.18 850 D71 0.74 0.70 0.70 56.0 56.0 52.0 0.66 0.58 0.47 4.0 1.91 1.9 2.0 0.00110 49 6.0

0.25 850 D71 0.95 0.90 0.90 59.0 59.0 55.0 0.68 0.58 0.47 4.0 2.65 1.9 2.0 0.00140 49 6.3

0.37 885 D80 1.30 1.24 1.24 62.0 62.0 59.0 0.70 0.60 0.48 4.7 3.93 1.9 2.0 0.00160 51 8.9

0.55 885 D80 1.79 1.70 1.70 65.0 67.0 65.0 0.72 0.64 0.51 4.7 5.84 1.9 2.1 0.00190 51 10.4

0.75 910 D90S 2.29 1.90 1.90 69.0 71.0 69.0 0.72 0.64 0.51 5.5 7.87 2.0 2.1 0.00290 54 12.1

1.1 910 D90L 3.18 2.80 2.80 72.0 74.0 73.0 0.73 0.65 0.52 5.5 11.54 2.0 2.1 0.00350 54 13.7

1.5 920 D100L 3.94 3.40 3.40 76.0 77.0 75.0 0.75 0.69 0.55 5.5 15.24 2.0 2.1 0.00690 58 23.0

2.2 935 D100L 5.60 4.90 4.90 79.0 81.0 80.0 0.76 0.69 0.56 6.5 22.84 2.0 2.1 0.01400 62 28.2

3 960 D112M 7.40 6.50 6.50 81.0 82.5 80.0 0.76 0.67 0.54 6.5 29.84 2.1 2.1 0.02860 66 40.3

4 960 D132S 9.80 8.50 8.50 82.0 84.0 83.0 0.76 0.70 0.57 6.5 39.79 2.1 2.1 0.03570 66 43.0

5.5 960 D132M 12.90 11.50 11.50 84.0 85.0 84.0 0.77 0.72 0.60 6.5 54.71 2.1 2.1 0.04490 66 47.2

7.5 970 D160M 17.00 14.60 14.60 87.0 87.0 86.5 0.78 0.76 0.64 6.5 73.84 2.0 2.1 0.08100 70 70.6

11 970 D160L 24.20 21.00 21.00 88.3 89.0 88.0 0.80 0.77 0.64 6.5 108.30 2.0 2.1 0.11600 70 85.0

0.9kW-18.5kW TEFC, CLASS F INSULATION, S1 (MCR) DUTY

Output Full Frame Current (amp) Efficiency (%) Power Factor Locked Torque Moment Noise WeightkW load No. at volts at load at load Rotor Full Locked Break of inertia LWdB B3

Speed (rpm) current Load Rotor down (J) (A) kgkW 380 400 415 100% 75% 50% 100% 75% 50% %FLC Nm %FLT %FLT kgm2

4

NOTES1. The above are typical values based on test on 400V.2. Performance to EN60034 Parts 1 and 2.3. Tolerance according to EN60034-1

4. Efficiency, power factor, speed and torque are thesame for other rated voltages. Full load currentvalues vary inversely with voltage.

5. Efficiencies are Eff2.6. Data subject to change without notice.

5

B3

Foo

t Mo

un

ted

Dim

ensio

ns

F

G

D

DH

AD

HA

AB

AAAK

H

AC

KK

L

BB

BCE

0.18 / 0.25 0.12 / 0.18 0.09 / 0.12 D63 100 24 135 130 111 80 100 40 63 7 7 M20x1.5 2170.37 / 0.55 0.25 / 0.37 0.18 / 0.25 D71 112 26 150 145 118 90 110 45 71 8 7 M20x1.5 245

0.75 / 1.1 0.55 / 0.75 0.37 / 0.55 D80 125 35 165 175 134 100 125 50 80 9 10 M25x1.5 2871.5 1.1 0.75 D90S 140 37 180 195 140 100 125 56 90 10 10 M25x1.5 3152.2 1.5 1.1 D90L 140 37 180 195 140 125 150 56 90 10 10 M25x1.5 3403 2.2 / 3 1.5 / 2.2 D100L 160 40 205 215 160 140 172 63 100 11 12 M32x1.5 3854 4 3 D112M 190 41 230 240 178 140 181 70 112 12 12 M32x1.5 400

5.5 / 7.5 5.5 4 D132S 216 51 270 275 206 140 186 89 132 15 12 M32x1.5 4837.5 5.5 D132M 216 51 270 275 206 178 224 89 132 15 12 M32x1.5 510

11 / 15 11 7.5 D160M 254 55 320 330 255 210 260 108 160 18 15 M40x1.5 61518.5 15 11 D160L 254 55 320 330 255 254 304 108 160 18 15 M40x1.5 670

Output kW Mounting Dimensions

2P 4P 6P Frame A AA AB AC AD B BB C H HA K KK L

D63 11 M4 x 12 23 4 8.5D71 14 M5 x 12 30 5 11D80 19 M6 x 16 40 6 15.5

D90S 24 M8 x 19 50 8 20D90L 24 M8 x 19 50 8 20D100L 28 M10 x 22 60 8 24D112M 28 M10 x 22 60 8 24D132S 38 M12 x 28 80 10 33D132M 38 M12 x 28 80 10 33D160M 42 M12 x 36 110 12 37D160L 42 M12 x 36 110 12 37

Frame D DH E F G

NOTES1. Tolerance of shaft end diameter D: under Ø28: j6 Ø38: k62. Tolerance of shaft centre height H +0, -0.5

Dimensions in mm

D63 6201ZZC3 6201ZZC3D71 6202ZZC3 6202ZZC3D80 6204ZZC3 6204ZZC3

D90S 6205ZZC3 6205ZZC3D90L 6205ZZC3 6205ZZC3D100L 6206ZZC3 6206ZZC3D112M 6206ZZC3 6206ZZC3D132S 6208ZZC3 6208ZZC3D132M 6208ZZC3 6208ZZC3D160M 6209ZZC3 6209ZZC3D160L 6209ZZC3 6209ZZC3

Frame Drive End Non Drive End

BEARINGSSHAFT EXTENSION

6

B5

/V1

Flan

ge

Mo

un

ted

Dim

ensi

on

s

NOTES1. Tolerance of shaft end diameter D:

under Ø28: j6 Ø38: k6

0.18 / 0.25 0.12 / 0.18 0.09 / 0.12 D63 130 111 1 x M20 x 1.5 217 115 95 140 140 30.37 / 0.55 0.25 / 0.37 0.18 / 0.25 D71 145 118 1 x M20 x 1.5 245 130 110 160 160 3.5

0.75 / 1.1 0.55 / 0.75 0.37 / 0.55 D80 175 134 1 x M25 x 1.5 287 165 130 200 200 3.51.5 1.1 0.75 D90S 195 140 1 x M25 x 1.5 315 165 130 200 200 3.52.2 1.5 1.1 D90L 195 140 1 x M25 x 1.5 340 165 130 200 200 3.53 2.2 / 3 1.5 / 2.2 D100L 215 160 1 x M32 x 1.5 385 215 180 250 250 44 4 3 D112M 240 178 2 x M32 x 1.5 400 215 180 250 250 4

5.5 / 7.5 5.5 4 D132S 275 206 2 x M32 x 1.5 483 265 230 300 300 47.5 5.5 D132M 275 206 2 x M32 x 1.5 510 265 230 300 300 4

11 / 15 11 7.5 D160M 330 255 2 x M40 x 1.5 615 300 250 350 350 518.5 15 11 D160L 330 255 2 x M40 x 1.5 670 300 250 350 350 5


2P 4P 6P Frame AC AD KK L M N P S T

D63 11 M4 x 12 23 4 8.5D71 14 M5 x 12 30 5 11D80 19 M6 x 16 40 6 15.5

D90S 24 M8 x 19 50 8 20D90L 24 M8 x 19 50 8 20D100L 28 M10 x 22 60 8 24D112M 28 M10 x 22 60 8 24D132S 38 M12 x 28 80 10 33D132M 38 M12 x 28 80 10 33D160M 42 M12 x 36 110 12 37D160L 42 M12 x 36 110 12 37

Frame D DH E F G

Dimensions in mm





F

G

D

DH

M

S

AD

P

L

KK

N

E

T

AC

7

B14

C-Face M

ou

nted

D

imen

sion

s

NOTES1. Tolerance of shaft end diameter D: under Ø28: j6 Ø38: k62. Tolerance of shaft centre height H +0, -0.53. Tolerance of N: h7

0.18 / 0.25 0.12 / 0.18 0.09 / 0.12 D63 130 111 23 1-M20 x 1.5 217 75 60 90 M5 2.50.37 / 0.55 0.25 / 0.37 0.18 / 0.25 D71 145 118 30 1-M20 x 1.5 245 85 70 105 M6 2.5

0.75 / 1.1 0.55 / 0.75 0.37 / 0.55 D80 175 134 40 1-M25 x 1.5 287 100 80 120 M6 31.5 1.1 0.75 D90S 195 140 50 1-M25 x 1.5 315 115 95 140 M8 32.2 1.5 1.1 D90L 195 140 50 1-M25 x 1.5 340 115 95 140 M8 33 2.2 / 3 1.5 / 2.2 D100L 215 160 60 1-M32 x 1.5 385 130 110 160 M8 3.54 4 3 D112M 240 178 60 2-M32 x 1.5 400 130 110 160 M8 3.5

5.5 / 7.5 5.5 4 D132S 275 206 80 2-M32 x 1.5 483 165 130 200 M10 3.57.5 5.5 D132M 275 206 80 2-M32 x 1.5 510 165 130 200 M10 3.5

11 / 15 11 7.5 D160M 330 255 110 2-M40 x 1.5 615 215 180 250 M12 418.5 15 11 D160L 330 255 110 2-M40 x 1.5 670 215 180 250 M12 4


2P 4P 6P Frame AC AD E KK L M N P S T

D63 11 M4 x 12 4 8.5D71 14 M5 x 12 5 11D80 19 M6 x 16 6 15.5

D90S 24 M8 x 19 8 20D90L 24 M8 x 19 8 20D100L 28 M10 x 22 8 24D112M 28 M10 x 22 8 24D132S 38 M12 x 28 10 33D132M 38 M12 x 28 10 33D160M 42 M12 x 36 12 37D160L 42 M16 x 36 12 37

Frame D DH F G

Dimensions in mm





F

D

DH

G

M

AD

S

P

T

KK

LE

N AC

TE

CO

Wo

rld

wid

eO

per

atio

ns

TECO ELECTRIC EUROPE LIMITED26 Bond · World Freight Centre · Trafford ParkManchester · M17 1WF · United KingdomT +44 (0)161 877 8025 · F +44 (0)161 877 8030E [email protected]

www.teco.co.uk0307/TEE006/ISSUE 5

YOUR LOCAL TECO DISTRIBUTOR

HEAD OFFICETeco Electric & Machinery Co. Ltd49 Wu Kong 6 Rd. Wu-Ku IndustrialPark, Taipei County 248Taiwan ROCTel: +886 2 8990 1111www.teco.com.tw

UNITED STATESTeco-Westinghouse Motor CompanyPO Box 227 (78680-0277)5100 N.IH35Round Rock Texas 78681 USATel: +1 512 255 4141, +1 800 873 8326www.tecowestinghouse.com

CANADATeco-Westinghouse Motors Inc.18060-109th Ave, Edmonton,Alberta T5S 2K2 CanadaTel: +1 780 444 8933Toll Free: 800 661 4023www.twmi.com

UNITED KINGDOMTeco Electric Europe Limited26 Bond, World Freight CentreEuropa Way, Trafford Park,Manchester M17 1WF,United KingdomTel: +44 161 877 8025www.teco.co.uk

GERMANYTECO Westinghouse Germany, GmbHMarktstraße 69, 37441 Bad SachsaTel: +49 (0)5523 95340Fax: +49 (0)5523 953424www.teco-westinghouse.de

SPAINTeco Electric Europe LtdC/Sancho Dávila 8 4ºF28028 Madrid SpainTel: +34 91 725 1718

AUSTRALIASydney Office: Teco Australia Pty Ltd335-337 Woodpark RoadSmithfield NSW 2164 AustraliaTel: +61 2 9765 8118www.teco.com.au

Melbourne Office: 16 Longstaff Rd, Bayswater VIC 3153 AustraliaTel: +61 3 9720 4411

Brisbane Office: 50 Murdoch Circuit,Acacia Ridge QLD 4110 AustraliaTel: +61 7 3373 9600

Perth Office: 28 Belgravia Street, Belmont WA 6104 AustraliaTel: +61 8 9479 4879

NEW ZEALANDTeco New Zealand Pty Ltd.Unit 3 477 Great South RoadPenrose Auckland New ZealandTel: +64 9 526 8480

CHINASuzhou Teco Electric & MachineryCo., Ltd. No. 1 Changjiang W.Rd.South-Dam Industrial Park LiuheZhen, Taicang City, Suzhou,Jiangsu Province, PRCTel: +86 512 5361 9901

Wuxi Teco Electric & Machinery Co.,Ltd. No. 72 Wuxi National Hi-TechIndustrial Development ZoneNew District Jiang Su, PRCTel: +86 510 534 2005

Shanghai Office: 12F No. 1800Zhongshan West Road Shanghai, PRCTel: +86 21 6440 1477

HONG KONG Tecoson Industrial Development(HK) Co Ltd.Rm 3712 Hong Kong Plaza186-191 Connaught Rd WestHong Kong Tel: +852 2858 3220

JAPANSankyo Co., Ltd.26th fl. World Trading Center Bldg. 2-4-1 Hamamatsucho Minato-ku Tokyo Japan 105-6126Tel: +81 3 3435 9729

SINGAPORETeco Electric & Machinery (PTE) Ltd.18 Chin Bee Drive, Singapore 619865Tel: +65 6 265 4622www.teco.com.sg

INDONESIAP.T. Teco Multiguna ElektroJL Bandengan Utara No. 83/1-3Jakarta Utara-14400 IndonesiaTel: +62 21 662 2201

MALAYSIASTE Marketing SDN BHD6 Jalan Firma 2 Kawasan Perind.Tebrau 181100 Johor Bahru Johor MalaysiaTel: +60 7 354 8008

THAILANDTeco Electric & Machinery (Thai) Co. Ltd.128/1 Soi WatsrivareenoiMoo 7 Bangna-Trad Road Km 18Bangchalong BangpleeSamuthprakarn 10540 ThailandTel: +662 3371311-20

8

a4 8pp alum lite · 2016-02-08 · teco motor products and publications tefc aluminium squirrel...

Documents