A new vision for quality assurance.

eMap™ for QA - the Integrated Lens Analysis System from EYOTO™

Set a new standard in quality control for your lab

Get ahead of the competition

Innovation in today’s market sets companies apart. From camber design digital progressives, or lenses for young digital device users, to multi-layer coatings with blue light filtering capabilities.

The quality control process has remained mostly unchanged since the development of the manual focimeter.

Your manufacturing business lives or dies by the quality of your product. For the first time you can evidence high quality standards in your lens production with eMapTM for QA - the fully scalable, cloud-connected Quality Assurance Platform.

HD imaging of edges, surfaces and coatings

Rapid power checking, capable of measuring thousands of points

Flexible system to pinpoint the location of defective processes

Total Integration Begin your quality control at the start of lens production by integrating the eMapTM C1 into your pre-surfacing, pre-coating and pre-edging checks.

Reduce wasted time and resources processing lenses that have already failed but would not normally be spotted until final checking.

The eMapTM C1 is connected to the EYOTO™ Cloud Portal allowing for powerful analysis of:

Pass/Fail rates

Failure reasons

Productivity

See more than ever before

The eMapTM C1 incorporates highly accurate power mapping and lens surface inspection and can spot a lens defect long before the end of the production process.

The Innovative eMapTM C1

For pucks and blanks (semi-finished and finished lenses)Measurement of power at all stages of productionCheck surface quality at the same time as power

Most labs still rely on manual checksfor final inspection. Focimetry is used to check the power and centration followed by a visual check for scratches: This can lead to: Variation between operators Subjective decision making Returns from customers Loss of trust Reduced business

The eMapTM C2 is connected to the EYOTO™ Cloud Portal.

The Cloud Portal gives you the ability to provide online quality assurance evidence to the ordering store. This can then be shared with the final customer.

This level of transparency builds trust with your customers. Gathering objective evidence of quality during final QC reduces returns and helps grow your business.

The Groundbreaking eMapTM C2

Revolutionise your final inspection process

More connected, more trust.

Future proof quality control

Simultaneous dual inspection for finished spectacles

Lens fit and inspection check

Objective and repeatable checking process

Simple pass/fail results

100% confidence and traceability on every pair shipped

eMapTM for QAImproves productivityReduces wastageMaximises profitability

The EYOTO™ Cloud Portal is the heart of the eMap™ system.

Every job scanned by an eMap™ is uploaded to the Cloud Portal providing a full history of the quality process for each job,which can be viewed by the QC manager, lab manager and lab owner.

Scalable to suit any business from a single lab to a multi-national business with sites across the world.

See and analyse data from an individual device to an entire worldwide manufacturing business.

Allows for faster, more responsive management of your manufacturing process.

The Cloud Portal provides:

Full data on every lens Quality control performance measures Insight into your lab’s productivity ... and more

Connected in the Cloud, better in the World

CLOUDPORTAL

CLOUDPORTAL CLOUD

PORTAL

CLOUDPORTAL

DISCOVER HOW TO SET THE STANDARD IN YOUR LAB

Key Features

Power Measurement PortalSpherical Power

Cylindrical Power

Mean Spherical Equivalent Power

Prism Power

Surface InspectionAutomatic highlighting of surface defects

Manual pass/fail

Automatic pass/fail

VisualisationSpherical Power Map Cylindrical Power Map Mean Spherical Equivalent Power Map Prism Power Map Regions of interest (Distance, Add, PD, Corridor) Overlay Measured Power Map on frame

Consumer Quality Evidence

External printer (optional)

IntegrationConnection to Lab Management System

+44 330 120 0717 meettheteam@eyoto.com eyoto.com