94.5120_4300_ivs_6x6x8_int_submittal
DESCRIPTION
armstrong pumpTRANSCRIPT
NO. OF PUMPS:
TAG:
CAPACITY: USgpm (L/s) HEAD: ft (m)
LIQUID: VISCOSITY:
TEMPERATURE: °F (°C) SPECIFIC GRAVITY:
PUMP DESIGN DATA
MATERIALS OF CONSTRUCTION
ANSI FLANGE RATING ANSI 125 ANSI 250
CONSTRUCTION BF DBF
CASING CAST IRON DUCTILE IRON
IMPELLER BRONZE BRONZE
FLUSH LINE
PUMP SHAFT 416 STAINLESS STEEL COUPLING HIGH TENSILE ALUMINUM GASKET CONFINED NON-ASBESTOS
MAX. PUMP OPERATING CONDITIONS
175 psig at 140°F (12 bars at 60°C)
375 psig at 100°F (26 bars at 38°C)
100 psig at 300°F (7 bars at 149°C)
275 psig at 500°F (19 bars at 260°C)
BRAIDED STAINLESS STEEL
Page 1 of 2
SUBMITTAL
JOB:
ENGINEER: CONTRACTOR:
REPRESENTATIVE:
ORDER NO: SUBMITTED BY: APPROVED BY:
DATE: DATE: DATE:
MOTOR DESIGN DATA HP: FRAME SIZE: ENCLOSURE: VOLTS: HERTZ: 60 Hz PHASE: 3 EFFICIENCY: NEMA PREMIUM 12.12
FLANGE SIZE: SUCTION: DISCHARGE:
• COUPLING GUARD (NOT SHOWN) IS SUPPLIED. • TOLERANCE OF ±0.125” (±3 mm) SHOULD BE USED. • FOR EXACT INSTALLATION DATA PLEASE WRITE FACTORY FOR CERTIFIED DIMENSIONS. • PUMP EQUIPPED WITH CASING DRAIN PLUG AND 1/4” NPT SUCTION AND DISCHARGE GAUGE PORTS
Series 4300 IVS With Integrated Controls
DRIVE DATA SENSORLESS CONTROL: MINIMUM SYSTEM PRESSURE TO BE MAINTAINED ft (m) * PROTOCOL (Standard): Modbus RTU Johnson® N2 Siemens® FLN
ENCLOSURE: NEMA UL Type 12
EMI/RFI CONTROL: Integrated filter designed to meet EN61800-3 HARMONIC SUPPRESSION: Dual D-link reactors (Equivalent: 5% A line reactor) Supporting IEEE 519-1992 requirements** COOLING: Fan-cooled through back channel AMBIENT TEMPERATURE: -10°C to +45°C up to 1000 meters above sea level (-14°F to +113°F, 3300 ft) ANALOG I/O: 2 current or voltage inputs, 1 current output DIGITAL I/O: 6 programmable inputs (2 can be configured as outputs) PULSE INPUTS: 2 Programmable RELAY OUTPUTS: 2 Programmable COMMUNICATION PORT: 1-RS485, 1-USB
PROTOCOL (Optional): LonWorks® BACnet™ MS/TP
OPTIONS: Real-time Clock Relay Card General I/O FUSED DISCONNECT SWITCH:
*If minimum maintained system pressure is not known: Default to 40% of design head **The IVS 102 drive is a low harmonic drive via built-in DC line reactors. This does not guaranty performance to
any system wide harmonic specification or the costs to meet a system wide specification. If supplied with the system electrical details, Armstrong will run a computer simulation of the system wide harmonics. If system harmonic levels are exceeded Armstrong can also recommend additional harmonic mitigation and the costs for such mitigation.
FILE NO: 94.5120 DATE: June 28, 2010 SUPERSEDES: 94.5120 DATE: Mar. 30, 2010
6 x 6 x 8
DIMENSION DATA - inches (mm)
Frame RPM Power (HP)
B C D E P S SD T XY Weight lbs (Kg)
ODP TEFC ODP TEFC 1800 1200 1800 1200
9.75(248)
7.50(191)
13.50(343)
19.50(495)
33.00(838)
10.38(264)
213TC 7.5 3 7.5 3 14.17 (360) 12.13 (308) 29.76 (756) 471 (213.7) 486 (220.5) 215TC 10 5 10 5 14.17 (360) 12.13 (308) 29.76 (756) 481 (218.2) 501 (227.3) 254TC 15 -- 15 -- 14.88 (378) 13.38 (340) 34.70 (881) 531 (240.9) 571 (259.1) 256TC 20 -- 20 -- 14.88 (378) 13.38 (340) 34.70 (881) 550 (249.5) 620 (281.2)
6” (150 mm) 6” (150 mm)
S. A. Armstrong Limited 23 Bertrand Avenue Toronto, Ontario Canada, M1L 2P3 T: (416) 755-2291 F (Main): (416) 759-9101
Armstrong Pumps Inc. 93 East Avenue North Tonawanda, New York U.S.A. 14120-6594 T: (716) 693-8813 F: (716) 693-8970
Armstrong Integrated Limited Wenlock Way Manchester United Kingdom, M12 5JL T: +44 (0) 8444 145 145 F: +44 (0) 8444 145 146 © S.A. Armstrong Limited 2010
For Armstrong locations worldwide, please visit www.armstrongintegrated.com
SEAL DATA OPTIONS
OPTIONAL EQUIPMENT
SEE FILE NO. 43.50 FOR ENVIRONMENTAL ACCESSORIES
MECHANICAL SEAL DESIGN DATA
See File No. 43.50 for standard mechanical
Armstrong Seal Reference Number C1 (a) Other____________
CHASSIS SIZE:
hp VFD Chassis Size 200V-240V 380V-480V 600V
7.5 B1 A5 A5 10 B1 A5 A5 15 B1 B1 B1
BHP based onshown Fluid's sp. gr.
4300 IVS4380 IVS
4300 IVSAll Ratings
4380 IVSAll Ratings
CURVE NO.
PT107-1-0-1150
6x6x8
RPM
AVAILABILITY
SERIES
SIZE
1150
00.00
20012.62
40025.24
60037.85
80050.47
100063.09
(usgpm)(lps)
(0.0) 0
(1.5) 5
(3.0) 10
(4.6) 15
(6.1) 20
(7.6) 25
Head (m) ft
2 hp
3 hp
5 hp
1.5 hp
83
83
79
79
73
73
64
64%
5339
6.51 in
7.42 in
8.19 in
NPSHr
FlowWater, spgr= 1.0000
1150 RPM
NPSHr
84
BHP based onshown Fluid's sp. gr.
4300 IVS4380 IVS
4300 IVSAll Ratings
4380 IVSAll Ratings
CURVE NO.
PT107-1-0-1750
6x6x8
RPM
AVAILABILITY
SERIES
SIZE
1777/1750
00.00
40025.24
80050.47
120075.71
1600100.94
(usgpm)(lps)
(0.0) 0
(3.0) 10
(6.1) 20
(9.1) 30
(12.2) 40
(15.2) 50
(18.3) 60
(21.3) 70
Head (m) ft
7.5 hp
10 hp
15 hp
20 hp
83
83
79
79
72
72
64
64%
5239
6.65 in
7.29 in
8.19 in*
NPSHr
FlowWater, spgr= 1.0000
1777/1750 RPM
NPSHr
84