8ch cc din ds-044-web
DESCRIPTION
8ch Cc Din Ds-044-WebTRANSCRIPT
-
RLH Industries, Inc. Tel. 866-DO-FIBER Fax 714 532-1885 www.fiberopticlink.com
Page 1
The leader in
rugged fiber optic
technology.
UnconditionalLifetime Warranty
DATA SHEET
RLH Industries, Inc.
DS-044 2014A-0502
RLH 8 Channel Contact ClosureDIN Fiber Link SystemThe RLH 8 Channel Contact Closure DIN Fiber Link system provides a transmission of up to eight independent contact closure signals over one optical fiber. The system comprises a transmitter module and a receiver module, each in a compact DIN mount housing.
The DIN mount is designed to be installed onto a standard T35 DIN rail. RLH Fiber Link products are temperature hardened, made in the U.S.A. and covered by our Unconditional Lifetime Warranty.
Key FeaturesEnvironmentHardened to operate in -40F to +158F (-40C to +70C)
Power24-56VDC local power source for each unitDC power is not polarity sensitive
ApplicationAvailable with ST or SC connectors for single or multi-mode fiber RX side includes alarm contact for status monitoringConvenient LED status indicatorsCritical, high voltage, remote or un-manned locations operating 24/7/365
QualityMade in the USACovered by our Unconditional Lifetime Warranty
RLH 8 Channel Contact Closure RX DIN Fiber Link
Front Panel Features and Dimensions
RX Side Unit
8 channel contact closure over !ber
CONTACTCLOSURE
RX
8CHANNEL
RLH Industries, Inc.
CH5CH6
CH7CH8
CH1CH2
CH3CH4
ALARM
NOCOM
NC
CH1 CH2 CH3 CH4
PWRLNK
ALMFIBER
CH5 CH6 CH7 CH8
EquipmentTerminals
Power Terminals
Alarm Terminal
LED Indicators
5.0
(1
27m
m)
1.82 (47mm)
Fiber Optic
-
Ordering InformationPart Number Description Distance Fiber Part Number
MultimodeSC
TX Card 2km / 1.2 mi 62.5 m 8CD-01-2MultimodeSC RX Card 2km / 1.2 mi 62.5 m 8CD-02-2
MultimodeST
TX Card 2km / 1.2 mi 62.5 m 8CD-03-2MultimodeST RX Card 2km / 1.2 mi 62.5 m 8CD-04-2
MultimodeSC
TX Card 2km / 1.2 mi 50 m 8CD-05-2MultimodeSC RX Card 2km / 1.2 mi 50 m 8CD-06-2
MultimodeST
TX Card 2km / 1.2 mi 50 m 8CD-07-2MultimodeST RX Card 2km / 1.2 mi 50 m 8CD-08-2
Single-modeSC
TX Card 15km / 9 mi. 8~9 m 8CD-10-2Single-mode
SC TX Card 48km / 29 mi. 8~9 m 8CD-11-2Single-mode
SCRX Card 15km / 9 mi. & 48km / 29 mi. 8~9 m 8CD-12-2
Single-modeST
TX Card 15km / 9 mi. 8~9 m 8CD-20-2Single-mode
ST TX Card 48km / 29 mi. 8~9 m 8CD-21-2Single-mode
STRX Card 15km / 9 mi. & 48km / 29 mi. 8~9 m 8CD-22-2
A complete system requires 1 TX unit and 1 RX unitPlease contact your RLH sales representative for pricing and delivery information
General SpecificationsTransmission method
Amplitude modulated light via two optical fibers
Multimode: 850nmTransmission methodAmplitude modulated light via two optical fibers Single-mode: 1310nm
Transmission methodAmplitude modulated light via two optical fibers
Single-mode Long Haul: 1310nmMaximum Fiber Attenuation /Distance *
Multimode: 6dB / 1.2 miles (2km)6dB / 1.2 miles (2km)Maximum Fiber Attenuation /Distance * Single-mode: 8dB / 9 miles (15km)8dB / 9 miles (15km)Maximum Fiber Attenuation /Distance *
Single-mode Long Haul: 24dB* / 29 mi. (48 km), min. required loss *-8dB24dB* / 29 mi. (48 km), min. required loss *-8dB
Maximum Fiber Attenuation /Distance *
* Note: Distances equated using industry standard fiber and connector attenuation of 3dB/Km. Fiber condition, splices and connectors may affect actual range.* Note: Distances equated using industry standard fiber and connector attenuation of 3dB/Km. Fiber condition, splices and connectors may affect actual range.* Note: Distances equated using industry standard fiber and connector attenuation of 3dB/Km. Fiber condition, splices and connectors may affect actual range.
Fiber Type ST or SC connectorsMultimode: 62.5/125m, 50/125mFiber Type ST or SC connectors Single-mode: 8-9/125m
Wire Connector Screw clamp terminal block, 16 ~ 26 AWGScrew clamp terminal block, 16 ~ 26 AWGScrew clamp terminal block, 16 ~ 26 AWGInput 1~4 (TX Card) Dry contact closure relayDry contact closure relayDry contact closure relayOutput 1~4 (RX Card) Normally Open RelayNormally Open RelayNormally Open RelayAlarm Output (RX Card) Normally Open/Closed RelayNormally Open/Closed RelayNormally Open/Closed RelayRelay Maximum Rating 115VAC 0.6A, 110VDC 0.6A, 30VDC 2A115VAC 0.6A, 110VDC 0.6A, 30VDC 2A115VAC 0.6A, 110VDC 0.6A, 30VDC 2AResponse Time 10ms10ms10msSurge Protection PTC thermistors, zener diodes and varistorsPTC thermistors, zener diodes and varistorsPTC thermistors, zener diodes and varistorsMean Time Between Failures (MTBF) 175,200 Hours (20 Years)175,200 Hours (20 Years)175,200 Hours (20 Years)Power Requirements TX Module: 24-56VDC, 15mA minimum24-56VDC, 15mA minimumPower Requirements
RX Module: 24-56VDC, 60mA minimum24-56VDC, 60mA minimumPowering Method Local DC power sourceLocal DC power sourceLocal DC power sourceOperating Temperature -40 to +158 F (-40 to +70 C), 95% non-condensing-40 to +158 F (-40 to +70 C), 95% non-condensing-40 to +158 F (-40 to +70 C), 95% non-condensingMounting T35 DIN Rail Mount (Included)T35 DIN Rail Mount (Included)T35 DIN Rail Mount (Included)Dimensions H5 x W1.82 x D3.5 (127mm x 47mm x 89mm) - Not including connectorsH5 x W1.82 x D3.5 (127mm x 47mm x 89mm) - Not including connectorsH5 x W1.82 x D3.5 (127mm x 47mm x 89mm) - Not including connectors
Page 2
RLH Industries, Inc. Tel. 866-DO-FIBER Fax 714 532-1885 www.fiberopticlink.com
RLH Industries, Inc.