8409.11 17 en€¦ · – apsad approval – fm approval: body materials: overview of available...

Butterfly Valve

BOAX-B

PS 10 bar: DN 40 to 1000PS 16 bar: DN 40 to 600Design toEN 593 and ISO 10631

Type Series Booklet

Legal information/Copyright

Type Series Booklet BOAX-B

All rights reserved. The contents provided herein must neither be distributed, copied, reproduced,edited or processed for any other purpose, nor otherwise transmitted, published or made available to athird party without the manufacturer's express written consent.

Subject to technical modification without prior notice.

© KSB S.A.S, Gennevilliers (Paris), France 23/05/2017

Butterfly ValvesCentred-disc Butterfly Valves

3BOAX-B

Butterfly Valves

Centred-disc Butterfly Valves

BOAX-B

Main applications▪ Spray irrigation systems

▪ Domestic water supply

▪ Water extraction

▪ Hot-water heating systems

▪ Gases

▪ Air-conditioning

▪ Washing plants

▪ Paint shops

▪ General irrigation systems

▪ Swimming pools

▪ Pressure boosting

▪ Water treatment

▪ Rainwater harvesting

Fluids handled▪ Heating water

▪ Cooling water

▪ Drinking water

▪ Waste water without faeces

▪ Fluids containing mineral oils

▪ Gas

▪ Oil

Operating data

Operating properties

Characteristic ValueNominal pressure PN 10/16Nominal size DN 40 - 1000Max. permissible pressure[bar]

16 (DN 40 - 600) / 10 (DN 40 -1000)

at ambient temperatureMin. permissible temperature[°C]

-10

Max. permissible temperature[°C]

+130 (see below)

Valve for lubricating fluids Max. reference velocity: 3 m/s

Valve for non-lubricatingfluids (gas)

Max. reference velocity: 50 m/s

Temperature with

▪ XC liner

▪ XU liner

▪ K liner

▪ EG liner (gas)

▪ -10 °C to +110 °C

▪ -10 °C to +130 °C

▪ -5 °C to +90 °C

▪ -20 °C to +60 °C

Design details

Design

▪ Wafer-type body with flat faces - T1: DN 650 - 1000

▪ Semi-lug body - T2: DN 40 - 600

▪ Full-lug body with raised faces - T4: DN 40 - 600

▪ Flanged body with flat faces - T5: DN 150 - 1000

▪ Dead-end service and downstream dismantling possiblewith body types T2, T4 and T5

▪ Elastomer liner: thicker elastomer in the area of the stempassage ensures leak-proof sealing to atmosphere

▪ The spherically machined valve disc ensures perfectly tightshut-off: no leakage visible to the naked eye

▪ Heat barrier between valve and lever

▪ Face-to-face length to ISO 5752-20 and EN 558-1-20

▪ EN, ASME connections

▪ Top flange to ISO 5211

▪ Marked in accordance with EN 19

▪ Absolutely tight shut-off (no leakage visible to the nakedeye) in either direction of flow in accordance withEN 12266-1, leakage rate A, and ISO 5208, category A.

▪ Design to EN 593

▪ Body with polyurethane coating, thickness 80 µm, colour:RAL 5002 (blue), in compliance with water specifications.

▪ Valve disc made of nodular cast iron, epoxy-coated,thickness 80 μm, colour: RAL 8012 (brown), suitable fordrinking water

▪ The valves satisfy the safety requirements of Annex I ofthe European Pressure Equipment Directive 2014/68/EU (PED) for fluids in Groups 1 and 2.

▪ Valves with actuators can meet the requirements of the2006/42/EC Machinery Directive for partly completedmachinery.

▪ The valves meet the requirements of the REACH 1907/2006regulation. None of the substances listed in the candidatelist and in Annex XIV of the regulation is present in aconcentration above 0.1 % (w/w) (Article 33/REACH).

▪ Standard manual actuation:


4 BOAX-B

– CR / CM quarter-turn levers

– MN / MR manual gearboxes

Variants▪ ACTELEC electric actuators (BOAX-B Mat E unit)

▪ ACTAIR NG / DYNACTAIR NG pneumatic actuators (BOAX-B Mat P unit)

▪ AMTROBOX limit switch box

▪ AMTRONIC valve controller with compressed air supply viadirectional control valve

▪ SMARTRONIC intelligent positioner

▪ BOAX-B model for gas, with yellow lever

▪ Model with manual gearbox for fire protection systems

– APSAD approval

– FM approval

Body materials

Overview of available materials

Material Material number Body DN KSBcode

EN-GJS-400-15

5.3106 / ASTMA536 Gr. 60.40.18

T1 DN 650 -1000

3g

EN-GJS-400-15

5.3106 T2 DN 40 - 600 3g

EN-GJS-400-15

5.3106 T4 DN 40 - 600 3g

EN-GJS-400-15

5.3106 / ASTMA536 Gr. 60.40.18

T5 DN 150 -1000

3g

Product benefits▪ Spherically machined valve disc with rounded sealing

contour

– ensures durable and permanently tight shut-off

▪ Splined or keyed connection between stem and valve disc

– Dry stem, no contact with fluid handled

▪ Sealing to atmosphere and tight shut-off are ensured,

– even when the actuator has been removed

▪ Marking indicates position of valve disc

▪ Stem in anti-blow-out design

– Stem is retained in the body.

▪ Valve equipped with stainless steel bearing bushes withreinforced PTFE coating

▪ The elastomer liner provides tight sealing at the flangedline connections, eliminating the need for a flange gasket.

▪ Valve certified to

– ACS / DVGW / WRAS / BELGAQUA for drinking waterapplications, with EPDM elastomer liner

– Suitable for foodstuffs in accordance with FDA /EN 1935, with EPDM liner

▪ Valve actuation options:

– Manual

– Electric

– Pneumatic

▪ Leak-proof stem passage ensured by spherically machinedvalve disc and thicker elastomer liner in the area of thestem passage

▪ Heat barrier between valve and lever stop plate

Related documentsDocument Reference numberActuator selection 8450.11Operating manual 8411.801

Purchase order specifications1. Type series

2. Nominal pressure

3. Nominal size

4. Fluid handled

5. Flow rate/velocity

6. Temperature

7. Materials (body, valve disc, seat)

8. Line connection, flange facing and flange surface quality

9. Actuator/automation

10. Reference number of type series booklet


5BOAX-B

Technical data

Vacuum resistanceDN NPS Liner mounting method Minimum pressure Max. temperature

[bar absolute]40-300 1½-12 Non-glued (standard) 1,33 . 10 -5 (10-2torr) 90 °C350-1000 14-40 Non-glued (standard) 0,3 90 °C

Hydraulic characteristicsDN NPS Flow coefficient with disc fully open Zeta

Kvo Cvo

40 1½ 53 62 1,4650 2 133 154 0,5665 2½ 240 280 0,4980 3 410 475 0,39100 4 655 760 0,37125 5 900 1044 0,48150 6 1800 2090 0,25200 8 3550 4120 0,20250 10 7350 8453 0,12300 12 9100 10465 0,16350 14 11200 12880 0,19400 16 14800 17020 0,19450 18 19700 22655 0,17500 20 25000 28750 0,16600 24 36400 41860 0,16650 26 37700 43730 0,20700 28 47500 55100 0,17750 30 51500 59740 0,19800 32 63500 73660 0,16900 36 84700 98250 0,151000 40 108500 125860 0,14


6 BOAX-B

Actuating torquesA safety coefficient has already been included in the actuating torques for actuator selection.

DN NPS Actuating torques [Nm]10 bar (lubricating) 10 bar (non-lubricating) 16 bar (lubricating)

40 1½ 8 16 1650 2 16 24 2465 2½ 24 32 3280 3 32 40 40100 4 48 56 56125 5 64 80 80150 6 104 112 112200 8 136 168 168250 10 198 297 297300 12 342 468 468350 14 450 648 648400 16 585 882 882450 18 720 1080 1080500 20 900 1350 1350600 24 1260 1890 1890650 26 1700 2600 -700 28 2000 3000 -750 30 2300 3500 -800 32 2600 4000 -900 36 3400 5000 -1000 40 4100 6000 -


7BOAX-B

Materials

Sectional drawing DN 40 - 1000DN 40-150 DN 200 DN 250-300

DN 350-600 DN 650-1000


8 BOAX-B

List of components

Part No. Description DN Materials KSB code100 Body T1 650-1000 Nodular cast iron 5.3106 / ASTM

A536 Gr. 60.40.183g

100 Body T2 40 - 600 Nodular cast iron 5.3106 3g100 Body T4 40 - 600 Nodular cast iron 5.3106 3g100 Body T5 150 - 1000 Nodular cast iron 5.3106 / ASTM

A536 Gr. 60.40.183g

176 Bottom 40 - 1000 Steel

2101) Stem 40 - 600 Stainless steel 1.4029 (13 % Cr) 6k

2131) Actuating stem 40 - 1000 Stainless steel 1.4029 (13 % Cr) 6k

310.11) Plain bearing 200 - 1000 Steel with reinforced PTFE coating

310.21) Plain bearing 200 - 1000 Steel with reinforced PTFE coating

310.31)2) Plain bearing 200 - 1000 Steel with reinforced PTFE coating

310.41)2) Plain bearing 350 - 600 Steel with reinforced PTFE coating

4121)2)3) O-ring 40 - 600 Nitrile

412.11)2)3) O-ring 650 - 1000 Nitrile

412.21)2)3) O-ring 650 - 1000 Nitrile

412.31)2)3) O-ring 650 - 1000 Nitrile

4133) Liner 40 - 1000 EPDM XC40 - 300 EPDM XU40 - 1000 High-grade Nitrile K40 - 1000 Epichlorohydrin EG

4861) Ball 650 - 1000 Stainless steel

5401)2)3) Bush 650 - 1000 Acetal

5502) Valve disc 40 - 1000 Nodular cast iron 5.3106 3g40 - 1000 Stainless steel 1.4308 / ASTM A351

Gr. CF86g

40 - 1000 Stainless steel 1.4408 / ASTM A351Gr. CF8M

6

40 - 600 Copper aluminium alloy CC333G /C95800

2

561 Half round head grooved pin 650 - 1000 Stainless steel

900.11)2)3) Stem anti-blow out device(screw)

250- 600 Stainless steel

900.21)2)3) Stem anti-blow out device(screw)

250 - 600 Stainless steel

9041) Adjusting screw 650 - 1000 Steel

9161)2)3) Plug 250 - 1000 Polyethylene

9201) Nut 650 - 1000 Steel

9321)2)3) Serrated washer 40 - 200 Steel

932.11)2)3) Circlip 650 - 1000 Steel

932.21)2)3) Circlip 650 - 1000 Steel

9401) Key 650 - 1000 Steel

970.1 Name plate 40 - 600 Adhesive polyester970.1 Name plate 650 - 1000 Stainless steel

1) Part from stem spare parts kit (available for DN 250 and above)2) Part from valve disc spare parts kit (available for DN 250 and above)3) Part from liner spare parts kit (available for DN 250 and above)


9BOAX-B

Dimensions

* Flat end s in Ø z or s

[mm]

DN NPS l1 h1 h2 Top flange to

ISO 5211

Stem end

Flat end

Stem end

Square end

Valve disc

No. h4 s Ø z h3 s h3 e1 e240 1½ 33 105 51 F05 10 11 14 24 - - 32 450 2 43 109 55 F05 10 11 14 24 - - 33 465 2½ 46 136 67 F05 10 11 14 24 - - 55 1180 3 46 142 73 F05 10 11 14 24 - - 71 17100 4 52 163 92 F05 10 14 18 24 - - 90 23125 5 56 176 105 F05 10 14 18 30 - - 119 35150 6 56 194 120 F07 12 14 18 30 - - 144 46200 8 60 222 150 F07 12 19 25 35 - - 196 69250 10 68 255 194 F10 15 19 25 35 - - 249 92300 12 78 282 226 F12 18 22 28 40 - - 297 111350 14 78 335 269 F12 23 - - - 25 45 326 127400 16 102 380 298 F14 23 - - - 36 55 370 140450 18 114 410 329 F14 23 - - - 36 55 422 160500 20 127 440 359 F14 27 - - - 36 55 470 178600 22 154 495 439 F16 27 - - - 50 65 566 215650 26 165 535 451 F16 26 - - - 50 65 620 235700 28 165 560 482 F16 26 - - - 50 65 671 260750 30 190 590 513 F16 26 - - - 50 65 717 273800 32 190 615 546 F16 26 - - - 50 65 769 298900 36 203 665 588 F25 30 - - - 60 80 869 3411000 40 216 735 646 F25 30 - - - 60 80 970 385


10 BOAX-B

Manual actuationThe selection of actuators given below typically applies to butterfly valves handling lubricating fluids at the maximum flowvelocities shown.

Higher flow velocities and further actuator/valve combinations are possible, depending on the operating conditions and hydrauliccharacteristics. Please contact us.

CR / CM leversDN NPS CR lever

l1 d1 l2 h5 Weight4)

[mm] [mm] [mm] [mm] [kg]40 1½ 33 108 CR165 175 0,850 2 43 118 CR165 179 0,865 2½ 46 132 CR165 206 0,880 3 46 138 CR165 212 0,8100 4 52 150 CR230 246 1,2125 5 56 234 CR300 272 1,7150 6 56 260 CR300 290 1,7200 8 60 322 CR510* 332 3,1250 10 68 394 CR510* 365 3,1300 12 78 462 CR510* 392 3,1

* In lubricating fluids only

N.B.: BOAX-B Gaz valves with EG and K liners are supplied with yellow CR levers.

4) The weights given refer to the actuating element.


11BOAX-B

Manual gearboxes MN and MR

Manual gearboxes MN and MR - 10 bar version

DN NPS Max.velocity

Actuator A B C D E h2 Weight

[m/s] [mm] [mm] [mm] [mm] [mm] [mm] [kg]Lubricating fluid250 10 3,0 MN25 46 140 38 41 200 196 1,9300 12 3,0 MR50 74 184 77 76 225 434 10,0350 14 3,0 MR50 74 184 77 76 225 487 10,0400 16 3,0 MR100 86 233 88 88 350 598 15,0450 18 2,5 MR100 86 233 88 88 350 617 15,0500 20 2,5 MR100 86 233 88 88 350 677 15,0600 24 2,5 MR200 120 270 108 117 350 743 24,0650 26 2,0 MR200 120 270 108 117 350 783 24,0700 28 2,0 MR200 120 270 108 117 350 808 24,0750 30 2,0 MR400 229 332 115 125 350 860 58,0800 32 2,0 MR400 229 332 115 125 350 885 58,0900 36 1,5 MR400 229 332 115 125 350 898 58,01000 40 1,5 MR400 229 332 115 125 350 1005 58,0Non-lubricating fluid250 10 3,0 MR50 74 184 77 76 225 407 10,0300 12 3,0 MR50 74 184 77 76 225 434 10,0350 14 3,0 MR100 86 233 88 88 350 553 15,0400 16 3,0 MR100 86 233 88 88 350 617 15,0450 18 2,5 MR200 120 270 88 117 350 658 24,0500 20 2,5 MR200 120 270 88 117 350 688 24,0600 24 2,5 MR200 120 270 108 117 350 743 24,0650 26 2,0 MR400 229 332 108 125 350 805 58,0700 28 2,0 MR400 229 332 108 125 350 830 58,0750 30 2,0 MR400 229 332 115 125 350 860 58,0800 32 2,0 MR400 229 332 115 125 350 885 58,0900 36 1,5 MR600 271 511 115 140 600 1074 105,01000 40 1,5 MR600 271 511 115 140 600 1144 105,0

Manual gearbox MN - 16 bar version

DN NPS Max.velocity


[m/s] [mm] [mm] [mm] [mm] [mm] [mm] [kg]40 1½ 3,0 MN12 34 92 30 34 100 103 1,050 2 3,0 MN12 34 92 30 34 100 113 1,065 2½ 3,0 MN12 34 92 30 34 100 116 1,080 3 3,0 MN12 34 92 30 34 100 116 1,0100 4 3,0 MN12 34 92 30 34 100 122 1,0125 5 3,0 MN12 34 92 30 34 100 126 1,0150 6 3,0 MN25 46 140 38 41 200 184 1,9200 8 3,0 MN25 46 140 38 41 200 188 1,9

* 50 [m/s] with non-lubricating fluid: gas


12 BOAX-B

BOAX-B APSAD (CNPP) - fire protection systemsAPSAD approval is valid for the unit consisting of the valve and the manual gearbox:

▪ BOAX-B model, 16 bar

▪ MN manual gearbox with:

– Red gear housing

– Yellow position indicator flag

▪ Options:

– Padlockable handwheel with chain

– Limit switches

DN NPS Max.velocity


[m/s] [mm] [mm] [mm] [mm] [mm] [mm] [kg]40 1½ 3,0 232-07LX 50 125 70 50 200 263 2,550 2 3,0 232-07LX 50 125 70 50 200 267 2,565 2½ 3,0 232-07LX 50 125 70 50 200 294 2,580 3 3,0 232-07LX 50 125 70 50 200 300 2,5100 4 3,0 232-07LX 50 125 70 50 200 321 2,5125 5 3,0 232-07LX 50 125 70 50 200 334 2,5150 6 3,0 232-07LX 50 125 70 50 200 352 2,5200 8 3,0 232-07LX 50 125 70 50 200 380 2,5250 10 3,0 232-1007LX 73 205 60 60 250 430 3,5300 12 3,0 232-1007LX 73 205 60 60 250 457 3,5


13BOAX-B

BOAX-B FM (Factory Mutual) - fire protection systemsFM (Factory Mutual) approval is valid for the unit consisting of the valve and the manual gearbox:

▪ BOAX-B model, 16 bar, with red body

▪ MR manual gearbox with:

– Red gear housing

– Yellow position indicator flag

▪ Options:

– Padlockable handwheel with chain

– Limit switches

DN NPS Max.velocity


[m/s] [mm] [mm] [mm] [mm] [mm] [mm] [kg]40 1½ 3,0 MR25 58 181 66 56 225 287 650 2 3,0 MR25 58 181 66 56 225 291 665 2½ 3,0 MR25 58 181 66 56 225 318 680 3 3,0 MR25 58 181 66 56 225 324 6100 4 3,0 MR25 58 181 66 56 225 345 6125 5 3,0 MR25 58 181 66 56 225 358 6150 6 3,0 MR25 58 181 66 56 225 369 6200 8 3,0 MR25 58 181 66 56 225 397 6250 10 3,0 MR25 58 181 66 56 225 430 6300 12 3,0 MR50 67 189 75 66 225 458 7


14 BOAX-B

Pneumatic actuators

BOAX-B Mat P-da unitValve with double-acting pneumatic quarter-turn actuator of the ACTAIR NG type series

Control pressure: 4 to 6 bar

The operating medium is air or any neutral gas, lubricated, filtered and compressed to 4, 5 or 6 bar:- Filtration: 50 µm- At maximum operating pressure, the dew point must be 5 °C below the minimum application temperature.

Dimensions

* NAMUR VDI/VDE 3845 interface** NAMUR-compatible interface

2 threaded holes 1/8 (gas-threaded) for ACTAIR NG 2 to 202 threaded holes 1/4 (gas threaded) for ACTAIR NG 40

DN NPS PS Type A B C D h2 Weight [kg][bar] ACTAIR NG [mm] [mm] [mm] [mm] [mm] ACTAIR

NG + T2ACTAIRNG + T4

ON/OFF function at a control pressure of 5 bar*40 1½ 10/16 ACTAIR NG 2 174,3 27,7 31,5 31,5 198,2 2,1 3,050 2 10/16 ACTAIR NG 2 174,3 27,7 31,5 31,5 202,2 2,3 3,565 2½ 10/16 ACTAIR NG 5 198,1 32,7 37,7 37,7 234,4 3,5 4,680 3 10/16 ACTAIR NG 5 198,1 32,7 37,7 37,7 246,4 4,1 6,1100 4 10/16 ACTAIR NG 10 237,1 38,5 44,8 44,8 274,3 6,4 8,0125 5 10/16 ACTAIR NG 10 237,1 38,5 44,8 44,8 293,3 7,2 11,5150 6 10/16 ACTAIR NG 15 289,9 51,0 56,5 56,5 329,5 11,5 15,6200 8 10/16 ACTAIR NG 20 313,6 51,0 60,1 60,1 361,1 15,9 29,4250 10 10 ACTAIR NG 20 313,6 51,0 60,1 60,1 398,1 21,8 44,4300 12 10 ACTAIR NG 40 387,7 62,0 72,9 72,9 458,9 39,6 55,6

* For other pressures see "Actuator Selection", ref. No. 8450.11/.-90


15BOAX-B

BOAX-B Mat P-sa unitValve with single-acting pneumatic quarter-turn actuator of the DYNACTAIR-NG type series

Control pressure: 4 to 6 bar

The operating medium is air or any neutral gas, lubricated, filtered and compressed to 4, 5 or 6 bar:- Filtration: 40 µm- At maximum operating pressure, the dew point temperature must be 5 °C below the minimum application temperature.

Dimensions

* NAMUR VDI/VDE 3845 interface** NAMUR-compatible interface

2 threaded holes 1/8 (gas-threaded) for DYNACTAIR NG 1 to 122 threaded holes 1/4 (gas-threaded) for DYNACTAIR NG 16 to 35

DN NPS PS Type A B C D h2 Weight [kg][bar] DYNACTAIR NG [mm] [mm] [mm] [mm] [mm] DYNACTAIR-

NG + T2DYNACTAIR-NG + T4

ON/OFF function at a control pressure of 5 bar*40 1½ 10/16 DYNACTAIR NG 2 259,0 32,7 37,7 37,7 203,4 3,1 4,050 2 10/16 DYNACTAIR NG 2 259,0 32,7 37,7 37,7 207,4 3,3 4,565 2½ 10/16 DYNACTAIR NG 4 304,3 38,5 44,8 44,8 247,3 4,9 6,080 3 10/16 DYNACTAIR NG 4 304,3 38,5 44,8 44,8 253,3 5,5 7,5100 4 10/16 DYNACTAIR NG 6 393,7 51,0 56,5 56,5 296,5 9,8 11,4125 5 10/16 DYNACTAIR NG 8 409,6 51,0 60,1 60,1 313,1 11,5 15,8150 6 10/16 DYNACTAIR NG 12 474,0 56,0 62,0 62,0 350,0 15,8 19,9200 8 10/16 DYNACTAIR NG 16 520,5 62,0 72,9 72,9 395,9 22,3 36,8250 10 10 DYNACTAIR NG 16/4 520,5 62,0 72,9 72,9 427,9 28,2 50,8300 12 10 DYNACTAIR NG 35 648,2 74,5 93,5 93,5 498 52,7 68,7

* For other pressures see "Actuator Selection", ref. No. 8450.11/.-90

Compressed air supply▪ Pilot valves with NAMUR interface, 5/2 monostable or 5/2

bistable

▪ Power supply: 230 V AC / 50 Hz or 24 V AC (other voltageson request)

▪ Operating temperature: - 20 °C

Electro-pneumatic positioner▪ On request


16 BOAX-B

Electric actuators

BOAX-B Mat E unitValve with electric quarter-turn actuator, make: BERNARD Controls

BOAX-B Mat E consists of a BOAX-B valve fitted with an ACTELEC actuator by BERNARD Controls, type series LE, models LEA andLEB for DN 40 to 125, or type series EZ, models EZ, SD, OA, ASP or AS for DN 150 to 300.BOAX-B Mat E are designed for on/off duty or control duty in intermittent operation S4 - 50% (LE and SD).ACTELEC quarter-turn actuators by BERNARD Controls feature irreversible kinematics.

Type LEA2 LEA3 LEB4 LEB10 EZ15 EZ25 EZ60Nominal torque (Nm) 25 35 45 100 150 250 600Actuating time in seconds for on/off duty 20 20 6 35 25 30 30Limit switches for OPEN and CLOSED positions StandardAdjustable mechanical travel stops StandardPower supply 230 V AC ~, 50 Hz / 24 V DC 230 V AC ~, 50 Hz

Type LEA2 LEA3 LEB4 LEB10 EZ15 EZ25 EZ60Minigam +

Nominal torque (Nm) 25 35 45 100 150 250 600Actuating time in seconds for control duty * - 20 - 35 15 30 30Limit switches for OPEN and CLOSED positions StandardAdjustable mechanical travel stops StandardPower supply 230 V AC ~, 50 Hz / 24 V DC

* Control duty is performed via a proportional setpoint and a 4-20 mA signal for actual-position feedback.

See type series booklets with reference Nos. 8521.12/.- and 8521.16/.-

Valves for 10 bar: lubricating and non-lubricating fluidsValves for 16 bar: lubricating fluids only

Valves for lubricating fluids: max. reference velocity: 3 m/sValves for non-lubricating fluids (gas): max. reference velocity: 50 m/s

Main electrical components

ACTELEC TYPE

Type LEA2 LEA3 LEB4 LEB10 EZ15 EZ25 AS50Limit switches for OPEN and CLOSED positions StandardAdjustable mechanical travel stops StandardTorque switches for OPEN and CLOSED positions Standard - StandardProtection by temperature switch - - StandardManual override StandardVisual position indicator StandardHeating resistor Integrated - -


17BOAX-B

Electrical data for standard actuating time

230 V AC ~, 50 Hz and 24 V, AC/DC

ACTELEC Type LEA2 LEA3 LEB4 LEB10Nominal current [A] 0,1 0,14 0,8 0,5Starting current [A] 0,24 0,3 0,9 0,6Power [W] 35,0 45,0 30,0 15,0

230 V AC ~, 50 Hz

ACTELEC Type EZ15 EZ25 EZ60Nominal current [A] 0,6 0,6 1,2Starting current [A] 0,9 0,9 1,7Power [W] 30,0 30,0 60,0

3~ 400 V AC, 50 Hz

ACTELEC Type EZ15 EZ25 EZ60Nominal current [A] 0,3 0,3 0,3Starting current [A] 0,5 0,5 0,8Power [W] 30,0 30,0 60,0


18 BOAX-B

DimensionsLEA2 and LEA3 LEB4 and LEB10

EZ15 and EZ15 Minigam + EZ25, EZ25 Minigam +, EZ60 and EZ60 Minigam +

On/off duty

DN NPS PS Type A (230V) A (24V) B C D E V h2 Weight [kg][bar] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] With T2 With T4

40 1½ 10/16 LEA2 118 118 65 77 41 - - 240 2,7 3,650 2 10/16 LEA3 118 118 65 77 41 - - 244 2,9 4,165 2½ 10/16 LEB4 148 202 90 140 65 60 106 320 6,9 8,080 3 10/16 LEB4 148 202 90 140 65 60 106 320 7,5 9,0100 4 10/16 LEB10 191 245 90 140 65 60 106 347 9,4 11,0125 5 10/16 LEB10 191 245 90 140 65 60 106 360 10,2 16,0150 6 10/16 EZ15 246 - 116 127 73 90 90 419 13,9 29,0200 8 10/16 EZ25 299 - 180 229 84 160 90 402 28,5 32,0250 10 10 EZ25 299 - 180 229 84 160 90 435 34,5 57,0300 12 10 EZ60 360 - 168 229 84 250 90 462 51,0 67,0

Control duty

DN NPS PS Type A (230V) A (24V) B C D E V h2 Weight [kg][bar] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] With T2 With T4

40 1½ 10/16 LEA3 118 118 65 77 41 - - 240 2,7 3,650 2 10/16 LEA3 118 118 65 77 41 - - 244 2,9 4,165 2½ 10/16 LEB10 191 245 90 140 65 60 106 320 7,4 8,580 3 10/16 LEB10 191 245 90 140 65 60 106 326 8,0 9,5100 4 10/16 LEB10 191 245 90 140 65 60 106 347 9,4 11,0125 5 10/16 LEB10 191 245 90 140 65 60 106 360 10,2 16,0150 6 10/16 EZ15

Minigam +246 246 116 127 73 90 90 419 13,9 29,0

200 8 10/16 EZ25Minigam +

299 299 180 229 84 160 90 402 28,5 32,0

250 10 10 EZ25Minigam +

299 299 180 229 84 160 90 435 34,5 57,0

300 12 10 EZ60Minigam +

360 360 168 229 84 250 90 462 51,0 67,0


19BOAX-B

Characteristics for EZ and SQ electric actuators See type series booklet 8521.12/.-

Features of LEA and LEB electric actuators

Technical specificationThe electric actuators are based on an electric quarter-turn actuator with actuator flange to ISO 5211.

ACTELEC Nominal outputtorque [Nm]

Valve/actuatorinterface

ISO 5211*standard

Stem end dimensions [mm]Type Depth Square end ** Flat end

LEA 2 25 F04 / F05 30 16 14LEA 3 35 F04 / F05 30 16 14LEA 3, proportional control 35 F04 / F05 30 16 14LEB 4 45 F05 / F07 32 19 19LEB 10 100 F05 / F07 32 19 19LEB 10, proportional control 100 F05 / F07 32 19 19* Direct mounting in the case of identical interfaces

** On request

On/off dutyType LEA 2 LEA 3 LEB 4 LEB 10

Nominal torque [Nm] 25 35 45 100Actuating time [sec] 20 20 6 35Nominal voltage [W] 35 45 30 15

Basic equipmentControl unit WiredTorque switch Electronic system Temperature switchMotor tripping Electronic system Electrical contact (1/Open, 1/Closed)Adjustable mechanical travel stops StandardAdjustable limit switches forsignalling

2 NO contacts (1/Open, 1/Closed) 2 for adjustable intermediate positions (2/I)

Anti-condensation heating Integrated Resistor 2 WManual override Via screw/nut Via handwheel

Power supply230 V AC ~, 50 Hz Yes - same motor Yes Yes - same motor230 V AC ~, 60 Hz115 V AC ~, 50 Hz Yes - same motor Yes115 V AC ~, 60 Hz24 V AC/DC Yes Yes Yes YesConnection 2 connectors ISO M20 gland glandMax. cable cross-section 4x1.5 mm2 (voltage)

3x0.75 mm2(signals)

2.5 mm2

Positioning/Control dutyType LEA 3, proportional control LEB 10, proportional controlNominal torque [Nm] 35 100Actuating time [sec] 20 35Nominal voltage [W] 35 15

Basic equipmentControl and actual-position feedback[mA]

4-20

Torque switch Electronic system Temperature switchMotor tripping Electronic system Electrical contact (1/Open, 1/Closed)Adjustable mechanical travel stops StandardAdjustable limit switches forsignalling

2 NO contacts (1/Open, 1/Closed) 2 for adjustable intermediate positions (2/I)

Anti-condensation heating Integrated Resistor 2 WManual override Via screw/nut Via handwheel

Power supply230 V AC ~, 50 Hz Yes - same motor Yes - same motor


20 BOAX-B

Type LEA 3, proportional control LEB 10, proportional control230 V AC ~, 60 Hz Yes - same motor Yes - same motor115 V AC ~, 50 Hz Yes - same motor115 V AC ~, 60 Hz Yes24 V AC/DC No YesConnection 2 connectors ISO M20 gland glandMax. cable cross-section 4x1.5 mm2 (voltage)

3x0.75 mm2(signals)

2.5 mm2

Circuit diagrams

On/off duty

LEAConnection by connectors

Power Signals

230 V AC 50/60Hz

4x1.5 mm2 max

250 V AC 2 A max

3x0.75 mm2 max

O: OpeningC: Closing


21BOAX-B

Type LEBConnection by cable gland

Actuator wiring Connection by customer

Power

230 V AC 50 Hz

4x2.5 mm2 max.

Signals

2 SPDT 250 V AC / 5Amax.

4x2.5 mm2 max.

Actuator wiring

230 V AC 50 Hz

2x2.5 mm2 max.

A: Power supply E: CloseB: Thermal motor protection F: Limit positionC: Closed G: Open-/Closed-position signallingD: Open O: Open


22 BOAX-B

Positioning/Control duty

LEA 3, proportional controlConnection by connectors

A: Actual-position feedback outputB: Actual-position feedback inputO: OpenC: Close

Type LEB, proportional controlActuator wiring Connection by customer

A: Power supply E: Input signalB: Thermal motor protection F: Actual-position feedback signalC: Closed G: InputD: Open-/Closed-position signalling H: OutputO: Open


23BOAX-B

VariantsACTELEC electric actuator

ACTAIR / DYNACTAIR pneumatic actuators

AMTRONIC / SMARTRONIC compressed air supply, positioner Limit switch box AMTROBOX, AMTROBOX S, AMTROBOX R,AMTROBOX EEx-ed, AMTROBOX EEx-ia


24 BOAX-B

Installation information

ConnectionsThe valves can be installed between the following lineconnections (other line connections on request):

▪ EN 1092 PN 10 and 16

▪ ASME B16.5 Class 150

▪ ASME 16.1 Class 125 and B16.47 Class 150 Series A

Wafer-type body with flat faces - T1DN NPS EN 1092 PN 10 EN 1092 PN 16 ASME B16.1 Class

125ASME B16.47 Class150 Series A

650 26 ● ● ● ✔█700 28 ✔█ ✔█ ● ✔█750 30 ● ● ✔█ ✔█800 32 ✔█ ✔█ ● ✔█900 36 ✔█ ✔█ ✔█ ✔█1000 40 ✔█ ✔█ ● ✔█

Semi-lug body - T2DN NPS EN 1092 PN 10 EN 1092 PN 16 ASME B16.1 Class

125ASME B16.5 Class150

40 1½ ✔ ✔ ✔ ✔50 2 ✔ ✔ ✔ ✔65 2½ ✔ ✔ ✔ ✔80 3 ✔ ✔ ✔ ✔100 4 ✔ ✔ ✔ ✔125 5 ✔ ✔ ✔ ✔150 6 ✔ ✔ ✔ ✔200 8 ✔▲ ✔ ✔▲ ✔▲250 10 ✔▲ ✔ ✔ ✔300 12 ✔ ✔ ✔ ✔350 14 ✔ ✔ ✔ ✔400 16 ✔ ✔ ✔ ✔450 18 ✔ ✔ ✔ ✔500 20 ✔ ✔ ✔ ✔600 24 ✔ ✔ ✔ ✔

Full-lug body with raised faces -T4DN NPS EN 1092 PN 10 EN 1092 PN 16 ASME B16.1 Class

125ASME B16.5 Class150

40 1½ ✔ ✔ ✔ ✔50 2 ✔ ✔ ✔ ✔65 2½ ✔ ✔ ✔ ✔80 3 ✔ ✔ ✔ ✔100 4 ✔ ✔ ✔ ✔125 5 ✔ ✔ ✔ ✔150 6 ✔ ✔ ✔ ✔200 8 ✔ ✔ ✔ ✔250 10 ✔ ✔ ✔ ✔300 12 ✔ ✔ ✔ ✔350 14 ✔ ✔ ✔ ✔400 16 ✔ ✔ ✔ ✔450 18 ✔ ✔ ✔ ✔500 20 ✔ ✔ ✔ ✔600 24 ✔ ✔ ✔ ✔


25BOAX-B

Flanged body with flat faces -T5DN NPS EN 1092 PN 10 EN 1092 PN 16 ASME B16 Class

125ASME B16.47Class 150 SeriesA

ASME B16.5 Class150

150 6 ✔ ✔ ✔ ● ✔200 8 ✔ ✔ ✔ ● ✔250 10 ✔ ✔ ✔ ● ✔300 12 ✔ ✔ ✔ ● ✔350 14 ✔ ✔ ✔ ● ✔400 16 ✔ ✔ ✔ ● ✔450 18 ✔ ✔ ✔ ● ✔500 20 ✔ ✔ ✔ ● ✔600 24 ✔ ✔ ✔ ● ✔650 26 ● ● ● ✔█ ●700 28 ✔█ ✔█ ● ✔█ ●750 30 ● ● ✔█ ✔█ ●800 32 ✔█ ✔█ ● ✔█ ●900 36 ✔█ ✔█ ✔█ ✔█ ●1000 40 ✔█ ✔█ ● ✔█ ●

Description

Symbol Description Symbol Description

✔ Installation possible ● Non-standardised connection

█ Installation between flanges is permitted. ▲ Fit washer between bolt and valve rib.

Dead-end service and downstream dismantling

Downstream dismantling Dead-end service

For downstream dismantling,

successively loosen diagonally opposed tie rods.


26 BOAX-B

Flange dimensionsThe valves can be installed between all commercial mating flanges and line connections without requiring any flange gaskets.

The elastomer liner alone provides a tight seal at the flange connections.

Please verify that the connection meets the requirements given below.

The flange dimensions indicated in the table apply to all body types.

Ø2a and Ø3: flange face diameter

Ø2b: pipe OD with loose plate flange to DIN 2642 and NF E 29-251

DimensionsDN NPS Optimum Ø Max. permissible Ø Min.

permissibleØ on flangeface

Min. Ø at adistance of 10 mmfrom the flangeface

Min. Ø at adistance of 20 mmfrom the flangeface

Min. permissibleØ of flangeshoulder offlanges withraised faces

Ø1 Ø2a Ø2b Ø3 Ø4 Ø5 Ø640 1½ 40 54 49 32 - - 7750 2 49 63 61 33 - - 8665 2½ 65 80 77 55 13 - 10780 3 77 93 89 71 50 - 121100 4 96 116 115 90 74 40 141125 5 123 141,5 140 119 107 87 171150 6 146 170,55) 169 144 134 120 196

200 8 196 2225) 220 196 189 178 250

250 10 249 276,55) 273 249 243 234 306

300 12 298 327,55) 324 297 291 283 358

350 14 330 361 356 326 321 314 399400 16 380 412 407 370 366 358 452450 18 430 463 457 422 416 409 505500 20 480 515 508 470 464 457 558550 22 540 568 561 522 516 509 625600 24 580 617 610 566 560 554 664650 26 630 668 - 620 614 608 723700 28 680 718 - 671 666 660 773750 30 730 770 - 717 711 705 830800 32 780 820 - 769 764 758 880900 36 880 924 - 869 864 859 9871000 40 980 1027 - 970 965 960 1094

5) Verify that body is correctly centred between the tie rods.


27BOAX-B

Coated flange

Flange with rubber coating Expansion bellows

N.B.: Direct installation between rubber-coated flanges or with expansion bellows is not permitted. Please contact us.


28 BOAX-B

Bolting and weights

Wafer-type body - T1

The drawings do not indicate the exact product design

(number of tapped lugs/clearance holes)

N.B.: Bolting is not included in our standard scope of supply.

Length of tie rod L = l1 + 2e + 2f

L: minimum length of tie rods

l1: face-to-face length of valve

e: flange thickness (customer-specific)

f: thickness of nut + standardised overhang of tierod

Bolt length at stem passage

A = e + X

A: max. bolt length

X: max. thread engagement depth


B: min. thread length > A-e


29BOAX-B

Wafer-type body - T1DN NPS d1 l1 EN 1092-1 PN 10 EN 1092-1 PN 16 Weight

Ø M Tie rod* Bolt Ø M Tie rod* Boltf Qty.** X Qty.** f Qty.** X Qty.** [kg]

650 26 745 165 - - - - - - - - - - 270700 28 795 165 M27 32 20 30 4 M33 38 20 25 4 315750 30 853 190 - - - - - - - - - - 380800 32 903 190 M30 35 20 33 4 M36 42 20 36 4 475900 36 1111 203 M30 35 24 33 4 M36 42 24 36 4 5451000 40 1118 216 M33 38 24 36 4 M39 45 24 29 4 670

DN NPS d1 l1 ASME B16.1 Class 125 ASME B16.47 Class 150 Series A WeightUNC Tie rod* Bolt UNC Tie rod Bolt

f Qty.** X Qty.** f Qty.** X Qty.** [kg]650 26 745 165 1"1/4 38 20 25 4 1"1/4 38 20 25 4 270700 28 795 165 1"1/4 38 24 25 4 1"1/4 38 24 25 4 315750 30 853 190 1"1/4 38 24 33 4 1"1/4 38 24 33 4 380800 32 903 190 1"1/2 45 24 29 4 1"1/2 45 24 29 4 475900 36 1111 203 1"1/2 45 28 29 4 1"1/2 45 28 29 4 5451000 40 1118 216 1"1/2 45 32 35 4 1"1/2 45 32 35 4 670

* Quantity of nuts = Quantity of tie rods x 2** Number of bolts per side


30 BOAX-B

Semi-lug body - T2

The drawings do not indicate the exact product design

(number of tapped lugs/clearance holes)




l1: face-to-face length of butterflyvalve


f: thickness of nut + standardisedoverhang of tie rod


A = e + X

A: max. bolt length





31BOAX-B

Semi-lug body - T2DN NPS d1 l1 EN 1092-1 PN 10 EN 1092-1 PN 16 Weight


40 1½ 108 33 M16 20 4 - - M16 20 4 - - 1,150 2 118 43 M16 20 4 - - M16 20 4 - - 1,365 2½ 132 46 M16 20 4 - - M16 20 4 - - 1,980 3 138 46 M16 20 8 - - M16 20 8 - - 2,5100 4 150 52 M16 20 8 - - M16 20 8 - - 3,9125 5 234 56 M16 20 8 - - M16 20 8 - - 4,7150 6 260 56 M20 24 8 - - M20 24 8 - - 6,9200 8 322 60 M20 24 8 - - M20 24 12 - - 10,5250 10 394 68 M20 24 12 - - M24 29 12 - - 16,4300 12 462 78 M20 24 12 - - M24 29 12 - - 30350 14 538 78 M20 24 10 20 6 M24 29 10 24 6 60400 16 604 102 M24 29 10 24 6 M27 32 10 27 6 80450 18 656 114 M24 29 14 24 6 M27 32 14 27 6 110500 20 716 127 M24 29 12 24 8 M30 35 12 30 8 145600 24 836 154 M27 32 10 27 10 M33 38 10 33 10 220

DN NPS d1 l1 ASME B16.1 Class 125 ASME B16.5 Class 150 WeightUNC Tie rod* Bolt UNC Tie rod Bolt

f Qty.** X Qty.** f Qty.** X Qty.** [kg]40 1½ 108 33 1/2" 17 4 - - 1/2" 17 4 - - 1,150 2 118 43 5/8" 20 4 - - 5/8" 20 4 - - 1,365 2½ 132 46 5/8" 20 4 - - 5/8" 20 4 - - 1,980 3 138 46 5/8" 20 4 - - 5/8" 20 4 - - 2,5100 4 150 52 5/8" 20 8 - - 5/8" 20 8 - - 3,9125 5 234 56 3/4" 24 8 - - 3/4" 24 8 - - 4,7150 6 260 56 3/4" 24 8 - - 3/4" 24 8 - - 6,9200 8 322 60 3/4" 24 8 - - 3/4" 24 8 - - 10,5250 10 394 68 7/8" 29 12 - - 7/8" 29 12 - - 16,4300 12 462 78 7/8" 29 12 - - 7/8" 29 12 - - 30350 14 538 78 1" 32 6 27 6 1" 32 6 27 6 60400 16 604 102 1" 32 10 27 6 1" 32 10 27 6 80450 18 656 114 1"1/8 35 10 30 6 1"1/8 35 10 30 6 110500 20 716 127 1"1/8 35 12 30 8 1"1/8 35 12 30 8 145600 24 836 154 1"1/4 38 10 32 10 1"1/4 38 10 32 10 220



32 BOAX-B

Full-lug body - T4

The drawings do not indicate the exact product design (number of lugs).


A = e + X

A: max. bolt length




l1: flange thickness


33BOAX-B

Full-lug body - T4DN NPS d1 l1 EN 1092-1 PN 10 EN 1092-1 PN 16 Weight


40 1½ 108 33 M16 - - 14 4 M16 - - 14 4 2,050 2 120 43 M16 - - 18 4 M16 - - 18 4 2,565 2½ 134 46 M16 - - 20 4 M16 - - 20 4 3,080 3 140 46 - - - - - - - - - - 4,080 3 178 46 M16 - - 20 8 M16 - - 20 8 4,5100 4 210 52 M16 - - 22 8 M16 - - 22 8 5,5125 5 236 56 M16 - - 22 8 M16 - - 22 8 9150 6 260 56 M20 - - 26 8 M20 - - 26 8 11200 8 312 60 M20 - - 26 8 - - - - - 24200 8 322 60 - - - - - M20 - - 26 12 25250 10 396 68 M20 - - 26 12 M24 - - 29 12 39300 12 466 78 M20 - - 26 12 M24 - - 30 12 46350 14 510 78 - - - - - - - - - 62350 14 530 78 M20 - - 26 16 M24 - - 30 16 70400 16 598 102 M24 - - 31 16 M27 - - 34 16 101450 18 622 114 - - - - - - - - - - 122450 18 654 114 M24 - - 31 20 M27 - - 34 20 139500 20 708 127 M24 - - 31 20 M30 - - 37 20 179600 24 822 154 M27 - - 36 20 M33 - - 42 20 256


f Qty.** X Qty.** f Qty.** X Qty.** [kg]40 1½ 108 33 1/2" - - 14 4 1/2" - - 14 4 2,050 2 120 43 5/8" - - 18 4 5/8" - - 18 4 2,565 2½ 134 46 5/8" - - 20 4 5/8" - - 20 4 3,080 3 140 46 5/8" - - 20 4 5/8" - - 20 4 4,080 3 178 46 - - - - 4,5100 4 210 52 5/8" - - 22 8 5/8" - - 22 8 5,5125 5 236 56 3/4" - - 23 8 3/4" - - 23 8 9150 6 260 56 3/4" - - 26 8 3/4" - - 26 8 11200 8 312 60 3/4" - - 26 8 3/4" - - 26 8 24200 8 322 60 - - - - 25250 10 396 68 7/8" - - 28 12 7/8" - - 28 12 39300 12 466 78 7/8" - - 28 12 7/8" - - 28 12 46350 14 510 78 1" - - 30 12 1" - - 30 12 62350 14 530 78 - - - - 70400 16 598 102 1" - - 34 16 1" - - 34 16 101450 18 622 114 1"1/8 - - 37 16 1"1/8 - - 37 16 122450 18 654 114 - - - - - - 139500 20 708 127 1"1/8 - - 37 20 1"1/8 - - 37 20 179600 24 822 154 1"1/4 - - 42 20 1"1/4 - - 42 20 256



34 BOAX-B

Flanged body with flat faces - T5 DN 150 - 600

The drawings do not indicate the exact product design (number of tapped holes/clearance holes).




l1: face-to-face length of butterfly valve




A = e + X

A: max. bolt length





35BOAX-B

Flanged body with flat faces - T5 DN 150 - 600DN NPS d1 l1 EN 1092-1 PN 10 EN 1092-1 PN 16 Weight


150 6 298 56 M20 24 4 20 4 M20 24 4 16 4 11200 8 343 60 M20 24 4 20 4 M20 24 8 16 4 23250 10 406 68 M20 24 8 20 4 M24 29 8 24 4 40300 12 483 78 M20 24 6 20 6 M24 29 6 24 6 60350 14 533 78 M20 24 10 20 6 M24 29 10 24 6 80400 16 597 102 M24 29 10 24 6 M27 32 10 27 6 105450 18 640 114 M24 29 14 24 6 M27 32 14 27 6 130500 20 715 127 M24 29 12 24 8 M30 35 12 30 8 180600 24 840 154 M27 32 10 27 10 M33 38 10 33 10 260


f Qty.** X Qty.** f Qty.** X Qty.** [kg]150 6 298 56 3/4" 24 4 4 4 3/4" 24 4 4 4 11200 8 343 60 3/4" 24 4 4 4 3/4" 24 4 4 4 23250 10 406 68 7/8" 29 8 8 4 7/8" 29 8 8 4 40300 12 483 78 7/8" 29 6 6 6 7/8" 29 6 6 6 60350 14 533 78 1" 32 6 6 6 1" 32 6 6 6 80400 16 597 102 1" 32 10 10 6 1" 32 10 10 6 105450 18 640 114 1"1/8 35 10 10 6 1"1/8 35 10 10 6 130500 20 715 127 1"1/8 35 12 12 8 1"1/8 35 12 12 8 180600 24 840 154 1"1/4 38 10 10 10 1"1/4 38 10 10 10 260



36 BOAX-B

Flanged body with flat faces - T5 DN 650 - 1000

Installation between flanges is permitted up to a max. differential pressure of 10 bar.

The drawings do not indicate the exact product design (number of tapped holes/clearance holes).


Installation between flanges



l1: face-to-face length of butterfly valve




A = e + X

A: max. bolt length




Flanged installation

Information on fasteners available on request


37BOAX-B

Flanged body with flat faces - T5 DN 650 - 1000DN NPS d1 l1 C EN 1092-1 PN 10 EN 1092-1 PN 16 Weight


650 26 869 165 31,0 - - - - - - - - - - 305700 28 895 165 32,5 M27 32 20 27 4 - - - - - 330700 28 925 165 32,5 - - - - - M33 38 20 25 4 350750 30 985 190 33,5 - - - - - - - - - - 350800 32 1015 190 35,0 M30 35 20 30 4 - - - - - 505800 32 1075 190 35,0 - - - - - M36 42 20 36 4 525900 36 1115 203 37,5 M30 35 24 30 4 - - - - - 590900 36 1160 203 37,5 - - - - - M36 42 24 36 4 6201000 40 1230 216 40,0 M33 38 24 33 4 - - - - - 7401000 40 1275 216 40,0 - - - - - M39 45 24 29 4 780

DN NPS d1 l1 C ASME B16.1 Class 125 ASME B16.47 Class 150 Series A WeightUNC Tie rod* Bolt UNC Tie rod Bolt

f Qty.** X Qty.** f Qty.** X Qty.** [kg]650 26 869 165 31,0 1"1/4 38 20 25 4 1"1/4 38 20 25 4 305700 28 895 165 32,5 - - - - - - - - - - 330700 28 925 165 32,5 1"1/4 38 24 25 4 1"1/4 38 24 25 4 350750 30 985 190 33,5 1"1/4 38 24 33 4 1"1/4 38 24 33 4 350800 32 1015 190 35,0 - - - - - - - - - - 505800 32 1075 190 35,0 1"1/2 45 24 29 4 1"1/2 45 24 29 4 525900 36 1115 203 37,5 - - - - - - - - - - 590900 36 1160 203 37,5 1"1/2 45 28 29 4 1"1/2 45 28 29 4 6201000 40 1230 216 40,0 - - - - - - - - - - 7401000 40 1275 216 40,0 1"1/2 45 32 35 4 1"1/2 45 32 35 4 780


KSB S.A.S.4, allée des Barbanniers • 92635 Gennevilliers Cedex (France)Tél. +33 1 41 47 75 00 • Fax +33 1 41 47 75 10www.ksb.com

8409

.11/

17-E

N23

/05/

2017

8409.11 17 en€¦ · – apsad approval – fm approval: body materials: overview of available...

Documents