+720ºc -196ºc - grm
TRANSCRIPT
+720ºCAND STILL PERFECT
TIGHTNESS
METAL SEATEDBALL VALVE K a r a T e c h n o l o g y N e w s ©
METAL SEATEDBALL VALVE
K a r a T e c h n o l o g y N e w s ©
-196ºCWITH ABSOLUTELY
ZERO LEAKAGE
METAL SEATEDBALL VALVE
K a r a T e c h n o l o g y N e w s ©
PENTABYKTN.TRIPTIC.indd 1 30/09/2019 10:43:54
1/2” 3/4” 1” 1 1/2” 2” 3” 4” 6”150 PN10-16300 PN25-40600 PN100
WAFER SPLIT BODY FLOATING BALL VALVESEAT: PENTAFITE/TUNGSTEN CARBIDE/CHROME CARBIDE/STELLITE/RPTFE
WSSFIG
CRIOGENIC SERVICES BALL VALVESEATS: SPRING LOADED PTFE /
PENTAFITE (limited to -100ºC) / Kel-F (-196ºC)
SAT CRIOFIG
3WAY FLOATING BALL VALVESEATS: PEEK/PENTAFITE/TUNGSTEN CARBIDE/CHRO-ME CARBIDE/STELLITE
W3FIG
METAL SEATED FLOATING BALL VALVESSEATS: PEEK/PENTAFITE/TUNGSTEN CARBIDE/CHROME
CARBIDE/STELLITE
APFIG
EXTREME TEMPERATURE SERVICE BALL VALVESEATS: PEEK/PENTAFITE/TUNGSTEN CARBIDE/CHROME CARBIDE/STELLITE
SATFIG
DESIGN: ANSI B16.34/API 608/API 6D/ISO 14313/ISO 17292/API 6A/ASME VIII Div.1SIZE RANGE: 1/2” to 24” – Pressare range Class 150 to 1500 / API 6A 2000 / 3000 / 5000OPTIONS: SPECIAL DESIGNS
FIG
·Metal seats with scraping rings (SAT3 model)·Subsea Ball Valves·Double Block and Bleed Systems·Non-Transflow 3 way·Change-over units
- 46ºC +400ºC
-196ºC +200ºC
-100ºC +400ºC
- 46ºC +400ºC
-100ºC +720ºC
-196ºC +720ºC
FLOATING BALL
1” 1 1/2” 2” 3” 4” 6” 8”150 PN10-16300 PN25-40600 PN100900 PN160
1500 PN250
TRUNNION MOUNTED BALL
1/2” 3/4” 1” 1 1/2” 2” 3” 4” 6”150 PN10-16300 PN25-40600 PN100900 PN160
1500 PN250
FLOATING BALL
1/2” 3/4” 1” 1 1/2” 2” 3” 4” 6” 8” 10”150 PN10-16300 PN25-40600 PN100
TRUNNION MOUNTED BALL
1/2” 3/4” 1” 1 4” 6” 8”150 PN10-16300 PN25-40600 PN100900 PN160
1500 PN250
TRUNNION MOUNTED BALL
1” 1 1/2” 2” 3” 4” 6” 8”150 PN10-16300 PN25-40600 PN100800900 PN160
1500 PN250
FLOATING BALL
1/2” 3/4” 1” 1 1/2” 2” 3” 4” 6” 8”150 PN10-16300 PN25-40600 PN100900 PN160
1500 PN2502500 PN420
FLOATING BALL
2” 2 1/2” 3” 4” 6” 8” 10” 12” 14” 16” 18” 20” 22” 24”150 PN10-16300 PN25-40600 PN100900 PN160
1500 PN2502500 PN420
TRUNNION MOUNTED BALL
PENTAFITE SEATTECHNOLOGY
PENTAFITE is a metallic compound with metallic matrix and fine dispersion of solid lubricant in-side. It is obtained by a manufacturing process similar to sintering with which, starting from fine powders of the single componenet, is possible to produce the metallic rings that form the seat insert for our metal seated ball valves for services with high temperature, high pressure or with combina-tion pressure/temperature higher than tolerable limits for polymeric material.
AVAILABLE SEAT MATERIAL COMPOSITIONS
Material Metallic Matrix Solid lubricant Working temperature Working pressure Valve size
PENTAFITE serie SXX(Nickel base)
Nickel Graphite or MoS2 -100ºC / +780ºCANSI 150 - 2500
API 10000PN 10 - 420
1/2” - 20”
PENTAFITE serie RXX(Cooper base)
Cooper Graphite -100ºC / +500ºC ANSI 150 - 2500 1/2” - 20”
PENTAFITE serie BXX(Carbon base)
Carbon Graphite Amb. / +400ºCPN 10 - 40
ANSI 150 - 300 1/2” - 4”
MECHANICAL AND PHYSICAL FEATURES
Friction factor against ground surface hardened to 1500 HV min. (SXX PENTAFITE Serie)
0,2
Maximum working specific pressure 30 Kg/mm2
Maximum working temperature 780°C
Maximum working pressure 720 bar
Thermal expansion 0°-200°C 14 x 10-6
PENTAFITE seat insertseat holder
Pressure/Temperature working range for seats manufactured in PENTAFITE
100x magnification of PENTAFITE cross-section
II2G c IIC TXII2D c IIC TX
UNI EN ISO 9001:2008UNI EN ISO 14001:2015
Directive2014/68/UE “PED”
Directive2014/34/UE “ATEX”
Manuel de falla street, 1928320, PINTO (MADRID) ES
+34 916 921 [email protected]
What matters is inside
PERFECT TIGHTNESSElastic properties of PENTA-FITE seat material allow the automatic adaptation of seats against ball shape, eliminating machining im-perfections. This is the way to eliminate any possible leak-point and achieve the per-fect tightness.
LOW VALVE TORQUEThe presence of the solid lubri-cant dispersion inside the me-tallic matrix, reduces the seat to ball friction factor and also the valve torque. For the same reason seizure or galling be-tween seat and ball surfaces are eliminated even when the working temperature is high.
EASY MAINTENANCEBecause it is not necessary for additional machining to adapt seats against the ball (You do not have to lap the seat against to the ball) valve assembly and maintenance are very easy when PENTAFITE metal seats are used.
GAS TIGHTNESSThe presence of the solid lubricant inside allows the PENTAFITE material to reach very high working specific pressures resulting in perfect tightness when high pressure gases must be stopped.
PENTABYKTN.TRIPTIC.indd 2 30/09/2019 10:43:56