719638 58935 chapter 9 transfer pricing
DESCRIPTION
tpTRANSCRIPT
1
Chapter 9
TRANSFER PRICINGCHAPTER INDEXCONCEPT OBJECTIVES METHODS THEORETICAL QUESTIONS
9.1 CONCEPTA transfer price is the price of an intra-firm transaction. It is the price charged for transfer of goods and services from one segment of the firm another of the same firm. “Transfer pricing” therefore refers to the setting of prices at which transactions occur involving the transfer of goods or services between different entities of the same company or group. Transfer prices serve to determine the income of both entities involved.
Transfer Pricing concept attain importance when the firms decentralize through profit centers. The manager of each department is responsible for the performance of his department. Each department tries to maximize its profit. The transferor department wants to charge the maximum price for what is being transferred. The transferee department wants to pay the minimum for the same. The determination of transfer price is guided by three principles:
(i) Transfer price should not have adverse impact of the profits of the company as a whole; pricing decisions should be in the best interest of the firm. (Remember the ultimate aim is to maximize the profits of the company as a whole. In case the transferor and the transferee are not able to negotiate the mutually satisfactory transfer price, the central management may interfere if it is necessary for maximize the profit of the company as a whole).
The other two rules, given below, are subordinates of this rule.
(ii) Minimum Transfer Price = cost to be incurred by the transferor + Benefit lost to be by the transferor
(iii) Maximum Transfer price is the cost to be incurred by the transferee in case of external buy.
2
9.2 OBJECTIVES OF TRANSFER PRICING A sound transfer pricing policy is one that meets the following objectives:
Goal congruent :Encourages transacting managers to make goal congruent decisions i.e. decisions should be in the best interest of the firm
Motivation :Fairly rewards transacting managers for their contribution to company profits,
Autonomy: Maintains transacting managers’ autonomy. Performance Evaluation: Should be able to measure the performance of
transacting managers. Provides basis for suitably rewarding the transacting managers. Co-ordinates production, sales and pricing decisions of different divisions. Should be simple to implement
9.3 METHODSFour methods are used for setting transfer prices; they are (i) cost based methods (ii) Market price based methods (iii) Profit shared method/contribution shared method, and (iv) Negotiated price method.
9.3-1 Cost based Methods(a) Variable cost based method: Under this method, goods are transferred by one unit
of the organization to the other unit of the organization at the cost to be incurred by the transferee for manufacturing the transferred items. (Generally the costs to be incurred are the variable costs). If the transferee shall be losing some benefit (say contribution), the transfer price may be fixed at “cost to be incurred plus benefit to be lost”.
(b) Full cost method: Under this method, goods are transferred by one unit of the organization to the other unit of the organization at full cost i.e. variable cost plus allocated fixed cost.
(c) Cost Plus Method: Under this method, goods are transferred by one unit of the organization to the other unit of the organization at full cost plus appropriate mark up to reward the work of the transferee unit.
9.3-2 Market Price based methods(a) External purchase price for the transferee: Under this approach, market price
means the price at which the transferee can procure the units from external market. (b) External sales price for the transferor: Under this approach, market price
means the price at which the transferor can sell the units in the external market. If the transferor shall have some savings of selling and distribution expenses because
3
of internal dealing, the amount of such savings should be deducted from the market price to determine the transfer price.
9.3-3 Profit shared method/contribution shared method Under this method, we find total profit (or contribution) earned by both transferor and transferee. This is equal to “External sale value of the final product minus cost incurred by both the transferor and transferee”. This profit is divided between the transferor and transferee in the ratio of their respective costs.
Transfer vale is determined as “cost of transferor plus its share in the profit”. Transfer price is equal to transfer value divided by number of units.
9.3-4 Negotiated price method Under this method, the transfer price is determined through the negotiation between the two transacting managers. This negotiation is guided by the following three principles:
(a) Transfer price should not have adverse impact of the profits of the company as a whole; pricing decisions should be in the best interest of the firm. (Remember the ultimate aim is to maximize the profits of the company as a whole. In case the transferor and the transferee are not able to negotiate the mutually satisfactory transfer price, the central management may interfere if it is necessary for maximize the profit of the company as a whole).
The other two principles, given below, are subordinates of this principle.
(b) Minimum Transfer Price = cost to be incurred by the transferor + Benefit lost to be by the transferor (c) Maximum Transfer price is the cost to be incurred by the transferee in case
of external buy. Limitations of the negotiated Price method
(a) This method takes lots of time and requires a great deal of analysis and data.(b) If the managers are uncooperative and highly competitive, negotiations may go
nowhere.(c) Sometimes, the negotiations may result in non-cooperation between the transacting
managers.(d) If the transferor has spare capacity, the negotiation may not be fair and the transfer
may not reward the transferor division
4
If the internal transfer can maximize the profit but the two transacting managers are not able to each at the consensus regarding the transfer price, the higher level management should intervene and persuade the managers to agree at the appropriate price. Let the egos of the transacting mangers may not come in the common goal of the organization.
Q.No.9.1 B. Limited, producing a range of minerals, is organized into two trading groups one handles wholesale business and the other sells to retailers. One of its products is a moulding clay. The wholesale group extracts the clay and sells it to external wholesale customers as well as to the retail group. The production capacity is 2,000 tonnes per month but at present sales are limited to 1,000 tonnes wholesale and 600 tonnes retails.
The transfer price was agreed at Rs. 200 per tonne in line with the external wholesale trade price at the 1st July which was the beginning of the budget year. As from 1st December, however competitive pressure has forced the wholesale trade price down to Rs. 180 per tonne . the members of the retail group contend that the transfer price to them should be the same as for outside customers. The wholesale group refute the argument on the basis that the original budget established the price for the wholesale budget year.
The retail group produces 100 bags of refined clay from each tonne of moulding clay which sells at Rs. 4 a bag. It would sell a further 40,000 bags if the retail trade price were reduced to Rs. 3.20 a bag.
The other data relevant to the operation are:Wholesale group Retail groupRs. Rs.
Variable cost per tonne 70 60Fixed cost per month 100000 40000
(A) Prepare estimated profit statement for the month of December for each group and for B Limited as a whole based on transfer prices of Rs. 200 per tonne and of Rs. 180 per tonne when producing at:(i) 80 per cent capacity , and (ii) 100 per cent capacity utilizing the extra sales to supply retail trade.
(B)Comment on the results achieved under (a) and the effect of the change in the transfer price. (Similar question appeared in CA final Nov. 2004)Answer: Statement showing monthly profit of Whole sale Division, Retail Division and Company as a whole under 80% capacity utilization of whole sale division and Rs.180 transfer Price
Wholesale Retail TotalSales Transfer Total (A)
1,000 x 180600 x 1802,88,000
60,000 x 4--------
2,40,000
4,20,000-------
4,20,000Cost :Variable 1600x70 600x60 1,48,000
5
Fixed TransferTotal (B)
1,00,000-------------2,12,000
40,000600x1801,84,000
1,40,000-------------2,88,000
Profit (A-B) 76,000 56,000 1,32,000
Statement showing monthly profit of Whole sale Division, Retail Division and Company as a whole under 80% capacity utilization of whole sale division and Rs.200 transfer Price
Wholesale Retail TotalSales Transfer Total (A)
1,000 x 180600 x 2003,00,000
60,000 x 4-----------2,40,000
4,20,000-------------4,20,000
Cost :Variable Fixed TransferTotal (B)
1600x701,00,000------------2,12,000
600x6040,000
600x2001,96,000
1,48,0001,40,000------------2,88,000
Profit (A-B) 88,000 44,000 1,32,000
Statement showing monthly profit of Whole sale Division, Retail Division and Company as a whole under 100% capacity utilization of whole sale division and Rs.180 transfer Price
Wholesale Retail TotalSales Transfer Total (A)
1,000 x 1801,000 x 180
3,60,000
1,00,000x3.20----------------
3,20,000
5,00,000-------------5,00,000
Cost :Variable Fixed TransferTotal (B)
2000x701,00,000
-------------2,40,000
1,000x6040,000
1,000x1802,80,000
2,00,0001,40,000------------3,40,000
Profit (A-B) 1,20,000 40,000 1,60,000
Statement showing monthly profit of Whole sale Division, Retail Division and Company as a whole under 100% capacity utilization of whole sale division and Rs.200 transfer Price
Wholesale Retail TotalSales Transfer Total (A)
1,000 x 1801,000 x 200
3,80,000
1,00,000x3.20--------
3,20,000
5,00,000-------
5,00,000Cost :Variable Fixed TransferTotal (B)
2000x701,00,000
-------------2,40,000
1,000x6040,000
1,000x2003,00,000
2,00,0001,40,000------------3,40,000
Profit (A-B) 1,40,000 20,000 1,60,000
6
(b) Wholesale Department may work at 100 per cent capacity as this will result in increase in profit for the company.
The transfer price may be kept at Rs. 180 for following two reasons.(i) It will satisfy the reasonable demand of Retail Department without any adverse
impact on profits of B. Ltd.(ii) Theoretically, the transfer price should not exceed current market price. If it so
exceeds the profit of transferor is reported at unreasonable higher level and this may result in concealment of inefficiencies and deficiencies of the transferor.
Q.No.9.2: SV Ltd. manufactures a product which is obtained basically from a series of mixing operations. The finished product is packaged in the company made glass bottles and packed in attractive cartons.
The company is organized into two independent divisions viz. one for the manufacture of the end-product and the other for the manufacture of glass bottles. The product manufacturing division can buy all the bottle requirements from the bottle manufacturing division.
The general Manager of the bottle manufacturing division has obtained the following quotations from the outside manufactures from the outside manufacturers for the supply of empty bottles.
No. of empty bottles Total purchase value (Rs.)8,00,000 14,00,000
12,00,000 20,00,000
A cost analysis of the bottle manufacturing division for the manufacture of empty bottle reveals the following production costs:
No. of empty bottles Total cost (Rs.)8,00,000 10,40,000
12,00,000 14,40,000
The production cost and sales value of the end product marketed by the product manufacturing division are as under:
Volume (Bottlesof and product)
Total cost of end product (excluding cost of empty
bottles.) (Rs.)
Sales value(Packed in bottles)
(Rs.)8,00,000 64,80,000 91,20,000
12,00,000 96,80,000 1,27,80,000
There has been considerable discussion at the corporate level as to the use of proper price for transfer of empty bottles from the bottle manufacturing division to product
7
manufacturing division. This interest is heightened because a significant portion of the Divisional General Manager’s salary is in incentive bonus based on profit centre results.As the corporate management accountant responsible for defining the proper transfer prices for the supply of empty bottles by the bottle manufacturing division to the product manufacturing division, you are required to show for the two levels of volumes of 8,00,000 and 12,00,000 bottles, the profitability by using (i) market price and (ii) shared profit relative to the costs involved basis for the determination of transfer prices. The profitability position should be furnished separately for the two divisions and the company as a whole under each method. Discuss also the effect of these methods on the profitability of the two divisions. [ICWA Final June 1989] Answer:
Statement showing profit separately for each to the two divisions and for the company as a whole under Market Price Method
Volume : 8,00,000Manufacturing
DivisionBottle Division Company as a whole
Sales / Transfer(A) 91,20,000 14,00,000 91,20,000Cost :(a) Own cost(b) Transfer Total (B)
64,80,00014,00,00078,80,000
10,40,000---
10,40,000
75,20,000---
75,20,000Profit (A-B) 12,40,000 3,60,000 16,00,000
Volume : 12,00,000Manufacturing
DivisionBottle Division Company as a whole
Sales / Transfer(A) 1,27,80,000 20,00,000 1,27,80,000Cost :(a) Own cost(b) Transfer Total (B)
96,80,00020,00,000
1,16,80,000
14,40,000---
14,40,000
1,11,20,000---
1,11,20,000Profit (A-B) 11,00,000 5,60,000 16,60,000
Calculation of profit separately for each to the two divisions and for the company as a whole under Shared Profit Method
Volume → 8,00,000 12,00,000Total sale value (A) 91,20,000 1,27,80,000Cost :Manufacturing Bottles Total (B)
64,80,00010,40,00075,20,000
96.80.00014,40,000
1,11,20,000Profit of company(A-B) 16,00,000 16.60,000
16,00,000 16,60,000
8
Profit as % of total cost ----------------x100 = 21.276675,20,000
------------------x100 = 14.928061,11,20,000
Profit of manufacturing 64,80,000x0.212766=13,78,723
96.80.000x0.1492806=14,45,035
Profit of bottles 10,40,000x0.212766= 2,21,277
14.40.000x0.1492806=2,14,964
Transfer Price of bottles 12,61,277 16,54,964Transfer Price per bottle Rs.1.58 1.379
Analysis Volume → 8,00,000 12,00,000
ProfitMarket price method:Manufacturing divisionBottle division
12,40,0003,60,000
11,00,0005,60,000
Shared profit method:Manufacturing divisionBottle division
13,78,7232,21,277
14,45,0352,14,964
Market Price method reports the higher amount of profit for the bottle division at both the volumes.
Share profit method reports the lower amount of profit for the manufacturing division at both the volumes.
If the Bottle division is in a position to sell the quantity under consideration at market price, the market price method is quite appropriate method: otherwise the shared profit method is appropriate.
Q.No.9.3 A company is engaged in the manufacture of edible oil. It has three divisions as under:
(i) Harvesting oil seeds and transportation thereof to the oil mill(ii) Oil mill, which processes oil seeds and manufactures edible oil(iii) Marketing division, which packs the edible oil in 2 Kg. containers for sale at
Rs.150 each container.The oil mill has a yield of 1000kgs of oil from 2000 kg. oil seeds during a period. The marketing division has a yield of 500 cans of edible oil of 2 Kg. each from every 1000 kg of oil. The net weight per can is 2 Kg. of oil. The cost data for each division for the period are as under:
Harvesting Division:Variable cost per kg. of oil seedFixed cost per kg. of oil seed
Rs.2.50Rs.5.00
Oil mill division:
9
Variable cost of processed edible oilFixed cost of processed edible oil
Rs.10.00 per kgRs.7.50 per kg.
Marketing Division:Variable cost per can of 2 kg. of oilFixed cost per can of 2 kg. of oil
Rs.3.75Rs.8.75
The fixed costs are calculated on the basis of estimated quantity of 2000 kg of oil seeds harvested. 1000 kg of processed oil and 500 cans of edible oil packed by the aforesaid divisions respectively during the period under review.
The other oil mills buy the oil seeds of same quality at Rs.12.50 per kg. in the market. The market price of edible oil processed by the oil mill, if sold without being packed in the marketing division is Rs.62.50 per kg. of oil.
Required:
(i) Compute the overall profit of the company of harvesting 2000 kg of oil seeds, processing into edible oil and selling the same in 2 kg cans as estimated for the period under review.
(ii) Compute the transfer prices that will be used for internal transfers from (a) Harvesting division to oil mill Division and (b) from oil mill division to marketing division under the following pricing methods:(1) Shared contribution in relation to variable costs (2) Market price
Which transfer pricing method will each divisional manager prefer to use?
(CA Final May 2001)
Answer:(i) Statement showing overall profit
Sales 500x150 (A) 75,000Harvesting Division:Variable cost per kg. of oil seed 2000x2.50Fixed cost per kg. of oil seed 2000x5.00Oil mill division:Variable cost 1000x10.00Fixed cost 1000x 7.50Marketing Division:Variable cost 500x3.75Fixed cost 500x8.75
15,000
17,500
6,250Total cost (B) 38,750Profit (A – B) 36,250
(ii)
Transfer Prices on Market Price Basis:
(a) Transfer from Harvesting Division to Oil mill Division Rs.12.50 per Kg of oil seed
(b) Transfer from oil mill division to marketing division: Rs. Rs.62.50 per kg. of oil
10
Transfer Prices on Shared contribution Basis
Total sale value (A) 500x150 75,000V. Cost :Harvesting Oil millMarketing Total (B)
5000100001875
16875Contribution of company(A-B) 58125 58125Contribution as % of V cost = ------- x100 16875
344.444444%
Contribution of Harvesting 5000x3.444444 = 17,222Contribution of oil mill 10000x3.444444 = 34,444Transfer Price of seeds : 5000+17222 22,222Transfer Price per Kg of oil seed = 22222/2000 11.11Transfer price of oil : 22222 + 10000 + 34,444 66,666Transfer Price per Kg of oil = 66,666/1000 66.67
(iii)
Statement showing Profit of each of three divisions under each of two methods of transfer pricing methods
Market Price method Shared contribution MethodHarvesting Division:Transfer Less : Own costProfit
2000x12.50-15,00010,000
2000x11.11-15,000
7220Oil mill Division:Transfer Less (i) Own cost (ii) TransferProfit
1000x62.50-17,500
-2000x12.5020,000
1000x66.67-17,500
-2000x11.1126,947
Marketing Division:Sales Less (i) Own cost (ii) TransferProfit
500x150-6250
-1000x62.506250
500x150-6250
-1000x66.672,083
Choice of Method Division → Harvesting Oil mill Marketing Method → Market price Shared contribution Market Price
11
Q. No. 9.4 Division Z is a profit center which produces for products A, B, C, and D. Each product is sold in the external market also. Data for the period is:
A B C DMarket price per unit (Rs.) 150 146 140 130Variable cost of pdn. Per unit (Rs.) 130 100 90 85Labour hours required per unit 3 4 2 3
Product D can be transferred to division Y, but the maximum quantity that may be required for transfer is 2,500 units of D.The maximum sales in the external market are:
A 2,800 unitsB 2,500 unitsC 2,300 unitsD 1,600 units
Division Y can purchase the same product at a price of Rs. 125 per unit from outside instead of receiving transfer of product D from Division Z.What should be the transfer price of each unit for 2,500 units of D, if the total labour hours available in division Z are 20,000 hours. [CA Final Nov. 2006][Similar question appeared in Nov. 2003)
Answer
Note: Maximum transfer price is Rs.125 per unit as Division Y won’t pay more than this amount.
Minimum transfer price is: variable cost + opportunity cost of Z.
Contribution per hour for each of 4 productsA B C D
Contribution per unit 20 46 50 45Hours per unit 3 4 2 3Contribution per hour 6.67 11.50 25 15
Rank IV III I II
Allocation of 20000 hours 600(Balancing
figure)
10,000 (maximum
requirement)
4,600(maximum
requirement)
4800 (maximum
requirement)
To produce 2500 units of D, the company requires 7500 hours; it has to cut the hours allocation to A ( 600 hours) and B(6900 hours).
Minimum transfer Price:Calculations Amount
VC 2,500x85 2,12,500
12
Opportunity cost of 600 hours of A 600x6.67 4,000Opportunity cost of 6900 hours of b 6,900x11.50 79,350Total 2,95,850Minimum transfer price per unit 2,95,850/2500 Rs.118.34
Q. No. 9.5 AB Cycles Ltd. has 2 divisions, A and B which manufacture bicycle. Division A produces bicycle frame and Division B assembles rest of the bicycle on the frame. There is a market for sub-assembly and the final product. Each division has been treated as a profit centre. The transfer price has been set at the long-run average market price. The following data are available to each division:
Estimated selling price of final product Rs. 3,000 p.u.Long run average market price of sub-assembly Rs. 3,000 p.u.Incremental cost of completing sub-assembly in division B Rs. 1,500 p.u.Incremental cost in Division A Rs. 1,200 p.u.
Required:(i) If Division A’s maximum capacity is 1,000 p.m. and sales to the intermediate are
now 800 units, should 200 units be transferred to B on long-term average price basis.
(ii) What would be the transfer price, if manager of Division B should be kept motivated
(iii) If outside market increases to 1,000 units, should Division A continue to transfer 200 units to Division B or sell entire production to outside market?
[CA Final May 2005]
Answer
(i) Transfer to 200 units to B
Cost BenefitIncremental cost of A Rs.1200Incremental cost of B Rs.1500Selling price Rs.3000Total Rs.2700 Rs.3000
As the proposal results in net benefit of Rs.300, 200 units may be transferred to B.(ii) To keep the Manager of B motivated, the transfer price may be decided on the
shared profit basis.
Cost of ACost of B
12001500 2,700
Profit 300Profit as % of cost (300/2700) x100 11.11Transfer Price = 1200 + 11.11% of 1200 1333.33
13
(iii)
Profit per unit (outside market) Rs.2000 – rs.1200 = Rs.800Profit per unit (Final product) (see answer to part I of the question)
Rs.300
Recommendation: Sale of entire production to outside is recommended.
Q. No. 9.6 Tripod Ltd. has three divisions – X,Y and Z, which make products X,Y and Z respectively. For division Y, the only direct material is product X and for Z, the only direct material is product Y. Division X purchase all its raw material from outside. Direct selling overhead, representing commission to external sales agents are avoided on all internal transfers. Division Y additionally incurs Rs. 10 per unit and Rs. 8 per unit on units delivered to external customers and Z respectively. Y also incurs Rs. 6 per unit picked up from X, whereas external suppliers supply at Y’s factory at the stated price of Rs. 85 per unit.Additional information is given below:
Figures Rs. / UnitX Y Z
Direct materials (external supplier rate) 40 85 135Direct labour 30 50 45Sales Agent’s commission 15 15 10Selling price in external market 110 170 240Production capacity 20,000
units30,000 units
40,000 units
External demand 14,000 units
26,000 units
42,000 units
You are required to discuss the range of negotiation for Managers X,Y and Z, for the number of units and the transfer price for internal transfers.
AnswerDivision X
External Demand Spare capacityQuantity 14,000 6,000SP in external market Rs. 110Transfer to Y:Minimum Price (demanded by X)Maximum Price (offered by Y)
Rs.95Rs.79
Rs.70Rs.79
Maximum Quantity of Transfer : 6000 (spare capacity)Range of negotiation : Rs.70 – Rs.79Any transfer price in this range is beneficial for the company as a whole.Any transfer price above Rs.70 is beneficial to XAny Transfer price below Rs.79 is beneficial to Y.
Division Y
14
External Demand Spare capacityQuantity 26,000 4,000SP in external market Rs. 170Transfer to Z:Minimum Price (demanded by Y)
Maximum Price (offered by Z)
Rs.153
Rs.135
Transfer Price of X +8+6+50 = TP of X + 64
Rs.135Maximum quantity of transfer : 4000 ( spare capacity)Range of negotiation for output of Y to be transferred to Z
Transfer Price of X Minimum Transfer price demanded by YRs.70 Rs.70 + Rs.64 = Rs.134Rs.71 Rs.71 + Rs.64 = Rs.135
If transfer Price of X is more than Rs.71, transfer of Y’s output to Z won’t be feasible.
Q. No. 9.7 Optically Ltd. makes two kinds of products P (lenses) and Q (swimming goggles) in divisions P and Q respectively. P is an input for Q and two units of P are needed to make one unit of Q.
The following date is given to you for a period.P
Rs./u of PQ
Rs. /u of QDirect materials 20 25 (excluding P)Direct labour 30 35Variable Overhead 10 20External Demand (units) 3,000 3,000Capacity (units) 7,000 2,500Selling Price Rs./u (outside market) 100 410
If Q buys P from outside, it has the following costs:For order quantity 2,499 or less Rs. 90 per unit for the entire quantity ordered.For order quantity 2,500-5,000 Rs. 80 per unit for the entire quantity ordered.For order quantity more than 5,000 Rs. 70 per unit for the entire quantity ordered.
You are required to evaluate the best strategies for Division P and Q. [CA Final Nov.2009]
Answer:
Product PSP (Outside market) Rs.100Maximum buying price from outside market Rs.90External demand of 3000 units should be met.
Total requirement of P (lenses) by Q division (Goggles making division): 5000.
15
Three alternatives of Procurement of PA: Transfer 4000 from P division and purchase 1000 from outsideB: Transfer 2500 from P division and purchase 2500 from outsideC: Purchase 5001 (Use 5000 and discard 1 unit)
Statement showing cost of procurement of 5000 Lenses under each of three alternatives (from company as a whole point of view)
A B CVC of makingCost of purchasing
4000x601000x90
2,500x602,500 x80
----5,001x70
Total 3,30,000 3,50,000 3,50,070
Recommendation: P may transfer 4000 lenses to Q division.
Q. No. 9.8 Bearing Ltd. makes three products, A,B and C in Division A, Band C respectively.
The following information is given:A B C
Direct materials (excluding material A for divisions B and C)
4 15 20 Rs./u
Direct labour 2 3 4 Rs./uVariable overhead 1 1 1 Rs./uSelling price to outside customers 15 40 50 Rs./uExisting Capacity 5,000 2,500 2,500 (No.of units)Maximum External demand 3,750 5,000 4,000 (No.of units)Additional fixed costs that would be incurred to install additional capacity
Rs.24,000 Rs.6,000 Rs.18,700
Maximum additional units that can be produced by additional capacity
5,000 1,250 2,250 (No.of units)
B and C need material A as their input. Material A is available outside at Rs. 15 per unit. Division A supplies the material free from defects. Each unit of B and C requires one unit of A as the input material.If B purchases from outside, it has to pay 15 per unit. If B purchase from A, it has to incur in addition to the transfer price, Rs. 2 per unit as variable cost to modify it.B has sufficient idle capacity to inspect its inputs without additional costs.
If C gets material from A, it can use it directly, but if it gets material from outside, which is at Rs. 15, it has to do one of the following:
(i) Inspect it at its own shop floor at Rs. 3 per unit.Or
(ii) Get the supplier to supply inspected products and pay the supplier Rs. 2 p.u. as inspection charges.
Or
16
(iii) A has enough idle labour, which it can lend to C to inspect at Re. 1 p.u. even though C purchases from outside.A has to fix a uniform transfer price for both B and C. The transfer price will no be known to outsiders and is at the discretion of the Divisional Managers.What is the best strategy for each division and the company as a whole?[CA Final June 2009]
AnswerMaximum transfer price (to be paid by B) : Rs.13Maximum Price to be paid by C : Rs.15 + inspection costA has to fix uniform price for both.Transfer price may be fixed at Rs.13/unit as it will be accepted to both B and C.A’s selling price for outside customers is more than the transfer price.Hence, A may supply 3750 units to external customers.A may supply total 1250 units at Rs.13 internally.
Contribution per unit on the basis of transfer price of Rs.13A B C
Sale Price/ transfer price receivable
13 40 50
Transfer Price payable Other VC
-7
1319
1325
Total VC per unit 7 32 38Contribution per unit 6 8 12Breakeven capacity for additional FC
24,000------- = 4000 6
6,000----- = 750 8[Extra demand is 1250. Hence, the fixed cost may be incurred, i.e., the capacity may be raised]
18700------ = 1559 12[Extra demand is only 1500. Hence, the fixed cost may not be incurred, i.e., the capacity may not be raised]
Internal Demand of A Demand by B Demand by C Total internal demand3750 2500 6250
Supply by A Out of spare capacity
Out of additional capacity raised
Total
1,250 5000 6250
Cost to Division A : 6250x7 + 24000 = 67,750Transfer consideration for A: 6250x13 = 81,250
17
Q. No.9.9 BETAGRO Ltd. which has system of assessment of Divisional performance on the basis of Residual Income has two divisions Alfa and Beta. Alfa has annual capacity to manufacture 15 lakhs nos. of a special component which it sells to outside customers; but has idle capacity. The budgeted residual income of Beta is Rs. 120 lakhs while that of Alfa is Rs. 100 lakhs. Other relevant details extracted from the Budget of Alfa for the year are:
Sale (to outside customers) 12 lakhs units @ Rs. 180 per unitVariable cost per unit Rs. 160Divisional Fixed Cost Rs. 80 lakhsCost of Capital 12%Capital Employed Rs. 750 Lakhs
Beta has just received a special order for which it requires components similar to the ones made by Alfa. Fully aware of Alfa’s unutilized capacity, Beta has asked Alfa to quote for manufacture and supply of 3,00,000 numbers of the components with a slight modification during final processing. Alfa and Beta agree that this will involve an extra variable cost of Rs. 5 per unit.
(i) Calculate the transfer price which Alfa should quote to Beta to achieve its budgeted residual income.
(ii) Indicate the circumstances in which the proposed transfer price may result in a sub-optimal decision for the BETAGRD group as a whole. [ICWA Dec. 1995]
Answer: (i) Teaching note: Capital charge = Cost of capital x WACC. Residual income refers to
excess of operating profit over capital charge.Actual operating income : Contribution: 240L FC : 80L Rs.160LakhsLess capital charge Rs.90LakhsActual residual income Rs.70LakhsBudgeted residual income Rs.100LakhsShort residual income Rs.30Lakhs
Contribution required to achieve the budged residual income Rs.30Lakhs. This amount of residual income is to be earned from this special order.
Contribution per unit from the order: Rs.30Lakhs/3,00,000 units = Rs.10/unit Transfer price = VC + contribution = 160 + 5 + 10 = Rs.175
(ii) The VC per unit is Rs.165. The proposed transfer price will be sub-optimal if it can be purchased from outside at less than Rs.165.
Q. No. 9.10 A company is organized into two divisions. Division X produces a component, which is used by division Y in making of a final product. The final product is sold for Rs. 540 each. Division X has capacity to produce 2,500 units and division Y can purchase the entire production. The variable cost of division X in manufacturing each component is Rs. 256.50.
18
Division X informed that due to installation of new machines, its depreciation cost had gone up and hence wanted to increase the price of component to be supplied to division Y to Rs. 297, however division Y can buy the component from outside the market at Rs. 270. The variable cost of division Y in manufacturing the final product by using the component is Rs. 202.50 (excluding component cost).
Present the statement indicating the position of each Division and the company as whole taking each of the following situations separately:
(i) If there is no alternative use for the production facility of X, will the company benefit, if division Y buys from outside suppliers at Rs. 270 per component.
(ii) If internal facilities of X are not otherwise idle and the alternative use of the facilities will bring annual cash saving of Rs. 50,625 to division X, should division Y purchase the component from outside suppliers?
(iii) If there is no alternative use for the production facilities of division x and the selling price for the component in the outside market drops by Rs. 20.25, should division Y purchase from outside suppliers
(iv) What transfer price would be fixed for the component in each of the above circumstances? [CA Final Nov. 2005]
Answer(i) No alternative use production facility of X
Two Alternatives:(A) Transfer from X(B) External purchaseStatement showing contribution for each division and the company as a whole under alternative A
Division X Division Y CompanySale/transfer 2500x297.00 2500x540.00 2500x540.00Less :
(a) VC(b) Transfer
2500x256.50----
2500x202.502500x297.00
2500x459.00
Contribution 1,01,250 101250 2,02,500
Statement showing contribution for each division and the company as a whole under alternative B
Division X Division Y CompanySale/transfer ---- 2500x540.00 2500x540.00Less :
(a) VC(b) external purchase
--------
2500x202.502500x270.00
2500x202.502500x270.00
Contribution ---- 1,68,750 1,68,750
Recommendation : Transfer from X is recommended.
19
(ii) Alternative use production facility of X
Two Alternatives:(A) Transfer from X(B) External purchase
Statement showing contribution for each division and the company as a whole under alternative A
Division X Division Y CompanySale/transfer 2500x297.00 2500x540.00 2500x540.00Less :
(c) VC(d) Transfer
2500x256.50----
2500x202.502500x297.00
2500x459.00
Contribution 1,01,250 101250 2,02,500
Statement showing contribution for each division and the company as a whole under alternative B
Division X Division Y CompanySale/transfer Contribution from alternative use
----
50,625
2500x540.00
----
2500x540.00
50,625Less :
(c) VC(d) external purchase
--------
2500x202.502500x270.00
2500x202.502500x270.00
Contribution 50,625 1,68,750 2,19,375
Recommendation : External purchase is recommended.
(iii) Drop in outside market Price
Two Alternatives:
(A) Transfer from X(B) External purchase
Statement showing contribution for each division and the company as a whole under alternative A
Division X Division Y CompanySale/transfer 2500x297.00 2500x540.00 2500x540.00Less :
(a) VC(b) Transfer
2500x256.50----
2500x202.502500x297.00
2500x459.00
Contribution 1,01,250 101250 2,02,500
20
Statement showing contribution for each division and the company as a whole under alternative B
Division X Division Y CompanySale/transfer ---- 2500x540.00 2500x540.00Less :
(e) VC(f) external purchase
--------
2500x202.502500x249.75
2500x202.502500x249.75
Contribution ---- 2,19,375 2,19,375
Recommendation : External purchase is recommended.
(iv)Transfer price
(i) Transfer Price = VC (as opportunity cost is zero) Rs.297
(ii) Transfer price = VC + Opportunity cost297 + 50625/2500 Rs.317.25
(iii) Transfer Price = market price(Theoretically, transfer price should be never above market price) Rs.249.75
Q. NO. 9.11 City Instrument Company (CIC) consists of the Semi-conductor Division and the Mini- computer Division each of which operates as an independent profit centre. Semi-conductor Division employs craftsman, who produce two different electronic components, the new-high performance super-chip and an older product called Okay-chip.
These two products have the following cost characteristics:Super-chip Okay chipMaterial Parts Rs. 20 Parts Rs. 10Labour 2 hours x Rs. 140 Rs. 280 ½ hour x Rs. 140 Rs. 70
Annual Overhead in Semi-conductor Division is Rs. 40,00,000 all fixed. Owing to high skill level necessary for the craftsman, the semi-conductor Division’s capacity is set at 50,000 hours per year.To date, only one customer has developed a product utilizing super-chip, and this customer orders a maximum of 15,000 super-chips per year at a price of Rs. 600 per chip. If CIC cannot meet his entire demand, the customer curtails his own production. The rest of the semi-conductor’s capacity is devoted to Okay-chips, for which there is unlimited demand at Rs. 120 per chip.The mini- computer Division produces only one product, a process control unit, which requires a complex circuit board imported at a price of Rs. 600. The control unit’s costs are:
Control unitMaterial Circuit board Rs. 600
21
Other parts 80Labour 5 hours @ Rs. 100 500
The Mini-computer Division is composed of only a small assembly plant and all overhead is fixed at a total of Rs. 8,00,000 per year. The current market price for the control unit is Rs. 1,400 per unit.A joint research project has just revealed that with minor modifications, a single super-chip could be substituted for the circuit board currently used by the Mini-computer’s staff , for a total of 6 hours per control unit. Mini-conductor division would sell super-chip internally.Required:
(i) Mini-computer expects to sell 5,000 control units this year. From the overall view point of CIC, how many super-chips should be transferred to mini-computer Division to replace circuit boards?
(ii) If the demand for the control unit is sure to be 5,000 units, but its price is uncertain, what should be the transfer price of super-chip t ensure proper decisions? (All other data unchanged).
(iii) If demand for the control unit rises to 12,000 units at a price of Rs. 1,400 per unit, how many of 12,000 units should be built using Super-chip? (All other data unchanged) (Nov. 2003)
Answer
Working note (a) Maximum Transfer Price (to be paid by mini-computer division): : Import cost minus modification cost = 600 – 100 = 500Working note (b) Semi-conductor Division
Super chip Okay chipCapacity used 30,000 hours 20,000 hoursContribution per unit 300 40Hours per unit 2 0.50Contribution per hour 150 80
(i) Transfer of 5,000 Super-chips (overall point of view)Cost Benefit
VC 300Contribution lost (2 hours @ Rs.80)(For this transfer, we reduce the production of okay-chip)
160
Modification cost 100Savings of import cost 600Total 560 600
22
As benefit is more than the cost, 5000 super-chips may be transferred internally. (For this purpose we have to spare 10,000 hours of Semi-conductor division by reducing the production of Okay-chip)
(ii) Minimum Transfer price = VC + opportunity cost = 300 + 80x2 = 460
(iii) Transfer of 12000 Super-chips
10,000 super-chips to be transferred by foregoing the production of okay-chips
2,000 super-chips to be Transferred by reducing the supply to the customer
VC 300 300Contribution lost:2 hours @ Rs.802 hours @ Rs.150
160---
---300
Minimum Transfer Price 460 600Maximum Transfer Price 500 500
Recommendation: 10,000 Super-chips may be transferred.
Q. No. 9.12 A company is organized an decentralized lines, with each manufacturing division operating as a separate profit centre. Each division manager has full authority to decide on sale of the division’s output to outsiders and to other divisions.
Division C has always purchased its requirements of a component from Division A. But when informed that Division A was increasing its selling price to Rs. 150, the manager of Division C decided to look at outside suppliers.
Division C can buy the component from an outside supplier for Rs. 135. But Division A refuses to lower its price in view of its need to maintain its return on the investment.
The top management has the following information.C’s annual purchase of the component 1,000 unitsA’s variable costs per unit Rs. 120A’s fixed cost per unit Rs. 20
Required:(i) Will the company as a whole benefit, if Division C bought the component at Rs.
135 from an outside supplier?(ii) If A did not produce the material for C, it could use the facilities for other
activities resulting in a cash operating savings of Rs. 18,000. Should C then purchase from outside sources?
(iii) Suppose there is no alternative use of A’s facilities and the market price per unit for the component drops by Rs.20. Should C now buy from outside
[CA Final Nov. 1998]
23
Answer
(i) Cost Benefit analysis of External PurchaseCost Benefit
External purchase priceSavings of VC
Rs.135----
----Rs.120
Recommendation: As cost is more than the benefit, the company as a whole will suffer in case of external purchase.
(ii) Using the facilities for other activities:
Cost Benefit Analysis Cost Benefit
External purchase priceSavings of VCCash operating savings Total
Rs.135---------
Rs.135
----Rs.120Rs.18
Rs.138
Recommendation: As benefit is more than the cost, the company as a whole will benefit in case of external purchase.
(iii) External Purchase price drops:
Cost Benefit Analysis of External Purchase Cost Benefit
External purchase priceSavings of VC
Rs.125----
----Rs.120
Recommendation: As benefit is more than the cost, the company as a whole will benefit in case of external purchase.
Q. No. 9.13 Hardware Ltd. Manufactures computer hardware products in different divisions which operate as profit centers. Printer Division makes and sells printers. The Printers division’s budgeted income statement, based on a sales volume of 15,000 units is given below. The printer Division’s Manager believes that sales can be increased by 2,400 units, if the selling price is reduced by Rs. 20 per unit from the present price of Rs. 400 per unit, and that, for this additional volume, no additional fixed costs will be incurred.
Printer Division presently uses a component purchased from an outside supplier at Rs 70 per unit. A similar component is being produced by the Components Division of Hardware Ltd. and sold outside at a price of Rs. 100 per unit. Components Division can make this component for the Printer Division with a small modification in the specification, which would mean a reduction in the direct Material cost for the Components Division by Rs. 1.5
24
per unit. Further, the component Division will not incur variable selling cost on units transferred to the Printer Division. The printer Division’s Manager has offered the Component division’s Manager a price of Rs. 50 per unit of the component.
Component Division has the capacity to produce 75,000 units, of which only 64,000 can be absorbed by the outside market.
The current budgeted income statement for Components Division is based on a volume of 64,000 units considering all of it sold outside.
Printer division Component divisionRs. ‘000 Rs. ‘000
Sales revenue 6,000 6,400Manufacturing cost:Component 1,050Other direct materials , direct labour and variable OH 1,680 1,920Fixed OH 480 704Total manufacturing cost 3,210 2,624Gross margin 2,790 3,776Variable marketing costs 270 384Fixed marketing and Admn. OH 855 704Non-manufacturing cost 1,125 1,088Operating profit 1,665 2,688
(i) Should the Printer Division reduce the price by Rs. 20 per unit even if it is not able to procure the components from the Component Division at Rs. 50 per unit?
(ii) Without prejudice to your answer to part (i) above, assume that printer Division needs 17,400 units and that, either it takes all its requirements from component division or all of it from outside source. Should the Component Division be willing to supply the printer Division at Rs. 50 per unit?
(iii) Without prejudice to your answer to part (i) above, assume that Printer Division needs 17,400 units. Would it be in the best interest of Hardware Ltd. for the Components Division to supply the components to the Printer at Rs. 50?Support each of your conclusions with appropriate calculations.
[CA Final May 2007]
Answer
(i) Proposal of price reduction
Statement Showing Profit under each of two alterantivesStatus Quo Price Reduction
Sales (A) 15,000x 400= 60,00,000
17400 x 380= 66,12,000
Costs:
25
ComponentOther VCFixed M. OverheadVariable marketing overheadFixed marketing and A.O.Total (B)
10,50,00016,80,0004,80,0002,70,0008,55,000
43,35,000
12,18,00019,48,8004,80,0003,13,2008,55,000
48,15,000Profit (A – B) 16,65,000 17,97,000
(ii) Contribution per unit of Component
Calculations Amount (Rs)Selling price 100Variable Manufacturing cost per unit 1920000/64000 -30Variable marketing cost per unit 384000/64000 -6Contribution per unit 64
Analysis of proposal of transferring 17400 units to Printers division:
There is spare capacity of 11,000 units; external supply of 6400 units have to be foregone
Minimum Transfer consideration : VC + contribution lost
: 28.50x17400 + 6400x64 = 9,05.500
Minimum transfer Price : 905500/17400 = 52.04
(iii) Analysis of Proposal of Supplying 17,400 units to Printers divisions(from company as a whole point of view)
Cost BenefitVC 28.50 x 17400Contribution lost 6400x 64Savings of variable cost 17400x70Total 905500 12,18,000
Recommendation: The proposal of supplying 17400 units is recommended as it increases the profit of the company as whole.
It may be impressed upon the printer division:
(i) Internal transfer is in the best interest of the Printers division and the company as a whole
(ii) Component division won’t supply below Rs.52.04(iii) Hence, the printer division should raise the transfer price to minimum Rs.52.04.
In spite of increase of transfer price, the proposal will increase the profit of Printers Division.
26
Q. No. 9.14 AB Ltd. manufactures foam, carpets and upholstery in its three divisions. Its operating statement for 1995-96 showing the performance of these divisions drawn for the use of management is reproduced below:
(Rupees in ‘000)Manufacturing Divisions Total
Foam Carpets UpholsterySales revenue 1,600(a) 1,200 1,200 4,000Manufacturing costs:Variable 1,200 700 680 2,580Fixed (Traceable) 100 20 120
1,200 800 700 2,700Gross profit 400 400 500 1,300Expenses:Administration 134 116 172 422Selling 202 210 232 644
336 326 404 1,066(B)Net Income 64 74 96 234Division’s Ranking 3rd 2nd 1st
(A) Sales include foam transferred to the Upholstery division at us manufacturing cost Rs. 2,00,000.
(B) Common expenses of Rs. 1,30,000 and Rs. 1,00,000 on account of administration and selling respectively stand apportioned to these divisions at 10% of Gross profit in case of administration and 2.5% of Sales in case of Selling expenses. Rest of Rs. 8,36,000 of the expenses are traceable to respective divisions.
The manager of the foam division is not satisfied with the above approach of presenting operating performance. In his opinion his division is best among all the divisions. He requests the management for preparation of revised operating statement using contribution approach and showing internal transfer at market price.You are required to:
(a) Draw the revised operating statement using contribution approach and pricing the internal transfer at market price.
(b) Compute relevant rations to show comparative profitability of these divisions and rank them in the light of you answer at (a) above. Further, offer your comments on the contention of the manager of foam division.
(c) State why the contribution approach and pricing of internal transfer at market price are more appropriate in realistic of assessment of the performance of various divisions. [CA Final May 1996]
Answer (i)
Working note 1:
Sale of foam other than internal transfer 1600thou. - 200thu. =1400thou.Manufacturing cost (exclusive for internal transfer) 1000thou.Mark up is 40% of manufacturing cost.
27
Market price of internal transfer 200thou. + 40% = 280thou
Working note 2 : Traceable expenses Foam Carpets Upholstery
AdministrationLess: commonTraceable
134thou.-40thou.94thou.
116thou.-40thou.76thou.
172thou.-50thou.122thou.
SellingLess: commonTraceable
202thou.-40thou.162thou.
210thou.-30thou.180thou.
232thou.-30thou.202thou.
Factory --- 100 20Total 256 356 344
Teaching note: Under contribution approach: we calculate product or entity wise net contribution. (By entities we mean, departments /divisions, plants etc,).
Net contribution is sale minus variable cost minus traceable fixed costs. (Traceable fixed costs are the fixed costs which relate to particular product/entity.
The common fixed costs are not divided among the products/entities. (Such expenses are charged against total net contribution of the company as a whole.)
Operating Income under contribution Approach(Pricing internal transfer at market price) (Rs.’000)
Manufacturing Divisions TotalFoam Carpets Upholstery
Sales RevenueTransfer RevenueTotal revenue
1400280
1680
1200---
1200
1200---
1200
3800280
4080VC 1200 700 760 2660Contribution 480 500 440 1420Traceable fixed cost (note 2) 256 356 344 956Net contribution 224 144 96 464Common fixed costs 230Operating income 234
(ii)
Foam Carpets UpholsteryContribution ratio
Ranking
Net contribution ratio
(480/1680) x100= 28.57%
III
(224/1680)X100= 13.33%
(500/1200) x100= 41.67%
I
(144/1200)X100=12%
(440/1200)X100= 36.67%
II
(96/1200)X100=8%
28
Ranking I II III
The contention of the Foam Division Manger is quite OK. The performance of his division is the best. This is evident from Net contribution ratio. This ratio considers all such costs and revenues over which the divisional manager has control. The ratio does not take into consider any such item over which the manger has no control.(iii) Contribution approach is quite appropriate approach for measurement of the division performance as it considers all such costs and revenues over which the divisional manager has control; also it excludes all such items over which the manger has no control.
Market price method is quite appropriate method of pricing the internal transfers as it gives due credit to the efforts of the transferor. The method is also appropriate from the point of view of transferee as it makes the appropriate charge for what the transferee gets.
Q. No. 9.15 A company has two divisions, Division ‘A’ and Division ‘B’ .Division ‘A’ has a Budget of selling 2,00,000 nos. of a particular component ‘x’ to fetch a return of 20% on the average assets employed. The following particulars of Division ‘A’ are also known.
Fixed Overhead Rs. 5 lakhsVariable C Re. 1 per unitAverage AssetsSundry Debtors Rs. 2 lakhsInventories Rs. 5 lakhsPlant & equipments Rs. 5 lakhs
However, there is constraint in Marketing and only 1,50,000 units of the component ‘x’ can be directly sold to the Market at the proposed price.It has been gathered that the balance 50,000 units of component ‘x’ can be taken up by Division ‘B’ Division ‘A’ wants a price of Rs. 4 per unit of ‘x’ but division ‘B’ is prepared to pay Rs. 2 per unit of ‘x’.Division ‘A’ has another option in hand, which is to produce only 1,50,000 units of component ‘x’. This will reduce the holding of assets by Rs. 2 lakhs and fixed overhead by Rs. 25,000.You are required to advise the most profitable course of action for division ‘A’.[CA Final Nov. 1997]
Answer
Working note: Budgeted selling price Budgeted VC Rs.2,00,000Budgeted FC Rs.5,00,000Budgeted profit Rs.12Lx0.20 Rs.2,40,000Budgeted sales Rs.9,40,000Budgeted SP 9,40,000/2,00,000 Rs.4.70
29
Accounting Information for decision regarding transferring 50000 units to Division B
Two Alternatives:
(I) Produce 2,00,000 units. Sell 1,50,000 units in market and transfer 50000 units to B
(II) Produce 1,50,000 units. Sell these units in the market.
Statement showing Profit and Return on CE under each of two alternatives I II
Sale Transfer
1,50,000 x 4.7050,000 x 2.00
1,50,000 x 4.70-----
Total (X) 8,05,000 7,05,000Costs:VCFC
2,00,0005,00,000
1,50,0004,75,000
Total (Y) 7,00,000 6,25,000Profit (X – Y) 1,05,000 80,000CE Rs.12,00,000 Rs.10,00,000Return on CE 8.75% 8%
Recommendation: The first option is recommended on account of not only higher profit but also higher ROCE.
Q.No. 9.16 A company has two manufacturing X and Y, X has capacity of 96000 hours per annum. It manufactures two products. ‘Gear’ and ‘Engines’ as [per the following details.]
Gears EnginesDirect Materials 240 64Variable costs at Rs. 64/hour 256 64Selling price in the outside market 640 128
Division ‘Y’ produces product ‘Wheels’ as per the following details:Rs./ unit
Imported components 640Direct Materials 96Variable cost at Rs. 40 per hour 320Selling price in the outside market 1,160
The fixed overheads for X and Y are Rs. 24 lakhs and Rs. Lakhs respectively. With a view to minimizing dependence on the imported component, the company has explored a possibility of Division y using product ‘Gears’ Instead of the imported component. This is possible provided Division Y spends 2 machine hours entailing an additional expenditure of Rs. 64 per component on modification of product ‘gears’ to fit into ‘wheels’. Production and sales of ‘wheels’ in Division Y is limited to 5000 units per annum.
(i) What will be maximum transfer price per unit that Y will offer?
30
(ii) In each of the following independent situations, state with supporting calculations, the minimum transfer price per unit that X will demand from Y, if 5000 units are required by Y.
Gears EnginesNo. of units
Market demand is limited to 20,000 20,000Market demand is limited to 15,000 10,000Market demand is limited to 18,000 24,000
(iii) In which of the above situations in (ii) will the management step in and compel X to sell to Y in the interest of overall company’s profit? [CA Final May 2011]
Answer(i) Maximum transfer Price: External purchase price – modification cost = Rs.640 – Rs.64 = Rs.576(ii) Statement showing contribution per hour by each of the two products of X
Gears EnginesSelling price 640 128VC per unit 496 98Contribution/unit 144 30Hours/unit 4 1Contribution/hour 36 30Production priority I II
Market demand 20,000 Gears and 20,000 EnginesAllocation of 96000 Hours
Gears Engines Total20000x4 = 80000 16000 (balancing figure) 96,000
To meet the internal demand, X requires 20000 hours. It will forego the production of 16000 Engines and external sale of 1000 gears.
Minimum Transfer consideration
= VC + contribution lost= 5000x496 +16000x30 + 1000x144 = 31,04,000
Minimum Transfer Price /unit = 31,04,000/5000 = 620.80
Market demand 15,000 Gears and 10,000 Engines
Allocation of 96000 Hours Gears Engines Spare capacity15000x4 = 60000 10,000x1 26,000
To meet the internal demand, X requires 20000 hours. It can utilize the spare capacity.
Minimum Transfer Price = VC + contribution lost = 496 + 0 = 486
31
Market demand 18,000 Gears and 24,000 Engines
Allocation of 96000 Hours Gears Engines Total18000x4 = 72000 24000 96,000
To meet the internal demand, X requires 20000 hours. It will forego the production of 20000 Engines.
Minimum Transfer consideration
= VC + contribution lost = 5000x496 +20000x30= 30,80,000
Minimum Transfer Price /unit = 30,80,000/5000 = 616
AnalysisMinimum TP Maximum TP Analysis
(i) 620.80 576.00 Internal transfer not feasible(ii) 486.00 576.00 Internal transfer beneficial (iii) 616.00 576.00 Internal transfer not feasible
(iii) Internal transfer is not feasible in (i) and (iii) cases. In (ii) case, internal transfer is beneficial for the company as whole. It will be beneficial for X as well if the transfer price is more than Rs.486. It will also be beneficial for Y if the transfer price is less than Rs.576.
Management interference is not required if the two divisions agree for internal transfer and the agreed transfer price is in the range of Rs.486-576.
Q. No.9.17 The two manufacturing divisions of a company are organized on profit centre basis. Division X is the only source of a component required by Division Y for their product P. Each unit of P requires one unit of the said component. As the demand of the product is not steady, orders for increased quantities can b e obtained by manipulating the prices. The manager of division Y has given the following forecast:
Sales per day (Units) 5,000 10,000 15,000 20,000 25,000 30,000
Average Selling Price per unit of P (Rs.) 393.75 298.50 247.50 208.50 180.00 150.7
5
The manufacturing cost (excluding the cost of the components from division X) of P division is Rs.14,06,250 for first 5,000 units and Rs.56.25 per unit in excess of 5,000 units.
Division X incurs a total cost of Rs.5,62,500 per day for an output of 5000 components and the total costs will increase by Rs.3,37,500 per day for every additional 5000 components manufactured. The manager of division X has set the transfer price of Rs.90 per unit to optimize the performance of his division.
32
Required:
(i) Prepare a divisional profitability statement at each level of output, for divisions X and Y separately.
(ii) Find out profitability of the component as a whole at out level where:(a) Division X’s net profit is maximum(b) Division Y’s net profit is maximum.
(iii) Find out at what level of output, the company will earn maximum profit, if the company is not organized on profit centre basis. (CA Final May, 2002)
Answer (i)
Statement showing profit of each of two divisions at various levels of operationSales units→ 5,000 10,000 15,000 20,000 25,000 30,000Division X Rs.Sales 4,50,000 9,00,000 13,50,000 18,00,000 22,50,000 27,00,000Costs 562500 5,62,500 +
3,37,500 =9,00,000
5,62,500 +6,75,000 =12,37,500
5,62,500 +10,12,500 =1575000
5,62,500 +13,50,000 =19,12,500
5,62,500 +16,87,500=2250000
Profit /Loss (112500) Nil 1,12,500 2,25,000 3,37,500 4,50,000Division YSales 19,68,750
(5000x393.75)
2985000(10,000x298.50)
37,12,500(15000x247.50)
41,70,000(20000x208.50
45,00,000(25,000x180)
45,22,500(30,000x 150.75)
Costs:(i)Own costs(ii)Cost of componentsTotal cost
14,06,250
4,50,00018,56,250
16,87,500
9,00,000 25,87,500
19,68,750
13,50,00033,18,750
22,50,000
18,00,00040,50,000
25,31,250
22,50,00047,81,250
28,12,500
27,00,00055,12,500
Profit /Loss 1,12,500 3,97,500 3,93,750 1,20,000 (2,81,250) (9,90,000)
(ii) X’s net profit is maximum at 30,000 level. If both the divisions operate at 30,000 level, the profit /Loss of the company as a whole will be 4,50,000 + (9,90,000) = 5,40,000(Loss)
Y’s net profit is maximum at 10,000 level. If both the divisions operate at 10,000 level, the profit /Loss of the company as a whole will be 0 + 3,97,500 = 3,97,500(Profit)
(iii) Statement showing profit of the company as a whole at various levels of operation (not on profit centre basis)
Sales 19,68,750(5000x393.75)
2985000(10,000x298.50)
37,12,500(15000x247.50)
41,70,000(20000x208.50
45,00,000(25,000x180)
45,22,500(30,000x 150.75)
Costs:(i)Own costs(ii)Cost of
14,06,250 16,87,500 19,68,750 22,50,000 25,31,250 28,12,500
33
componentsTotal costProfit /Loss
5,62,500 19,68,750
Nil
9,00,00025,87,5003,97,500
12,37,50032,06,2505,06,250
15,75,00038,25,0003,45,000
19,12,50044,43,750
56,250
22,50,00050,62,500(5,40,000)
The maximum profit, in this case, will be at 15,000 Units.
Q. No.9.18 X Ltd has two divisions, A and B, which manufactures products A and B respectively. A & B are profit centers with the respective Divisional Managers being given full responsibility and credit for their performance.
The following figures are presented: Division A Division B
Rs. per unit Rs. per unitDirect material cost 50 24 (other than cost of
component A)Material A if transferred from Division A 144Material A if purchased from outside 160Direct labour 25 14Variable production overhead 20 2Variable selling overheads 13 26Selling price in outside market 160 300Selling price to B 144Selling price to S(Subsidiary of X Ltd) 250
To make one unit of B, one unit of component A is needed. If transferred from A, B presently takes product A at Rs.144 per unit, with A not incurring variable selling overheads on units transferred to B.Product A is available in the outside market at Rs.160 per unit.
B can sell its product B in external market at Rs.300 per unit, whereas, it is supplied to S (subsidiary of X Ltd), and need not incur variable selling overheads on units transferred to S. S Ltd requires 6,000 units and stipulates a condition that either all 6000 units to be taken from B or none at all.
A BUnits Units
Manufacturing capacity 20,000 28,000Demand in external market 18,000 26,000S’s demand 6,000 or zero
Assume that divisions A and B will have to operate during the year.What is the best strategy for:
(i) Department A?(ii) Department B, given that A will use its best strategy?(iii) For X Ltd, as a whole? (CA Final May, 2008)
Answer (i)
34
Department A: Contribution per unit separately for external market and internal transfersExternal demand Internal demand
VC 108 95Selling price. Transfer price 160 144Contribution per unit 52 49Rank I II
Department A may sell 18000 units in external market and supply 2000 units to B.
(ii) There are two alternatives available to B. Sell 22,000 in external market and transfer 6,000 to S Sell 26,000 in external market
Statement showing contribution under each of the two alternativesI II
Sale Transfer value
66,00,00015,00,00081,00,000
78,00,000
78,00,000VC Cost of product A (supplied by A) Cost of product A (external market) V Production cost V Selling overheads
Total
2000x14426,000x16028,000x4022,000x2661,40,000
2000x14424,000x16026,000x4026,000x2658,44,000
Contribution 19,60,000 19,56,000X alternative is recommended.
(iii) Decision from company as a whole point of view
Department A: Transfer all 20,000 to B. (Product A is input for product B. If product A is sold in the external market the company will get net (net of variable selling overheads) Rs.144 per unit, in that case the company has to purchase @ Rs.160)
Department B: There are two alternatives available to X.
(I) Sell 22,000 in external market and transfer 6,000 to S(II) Sell 26,000 in external market
Statement showing contribution under each of the two alternativesI II
Sale Transfer value ( to S )
66,00,00015,00,00081,00,000
78,00,000
78,00,000VC V.Cost of product A (supplied by A) Cost of product A (external market) V Production cost (B)
20,000x95 8,000x160
28,000x40
20,000x956,000x16026,000x40
35
V Selling overheadsTotal
22,000x26 26,000x26
Contribution 32,28,000 32,24,000
Q. No.9.19 Winger Ltd. has two divisions in two different countries - Division Alfa in the country Alino and division Beta in Betanos. Alfa is a single product company; its product is S. Alfa’s maximum capacity is 10,00,000 units of S in a year. At present it sells 9,00,000 units of S to external customers @ Rs.150 per unit.
Division Beta purchases 2,50,000 units of S each year from local supplier in Betanos in local currency which is equal to Rs.130 per unit of S. In the interest of maximizing the group’s profit, it is suggested that Beta may buy 2,50,000 units of S from Alfa. Alfa agrees to supply S to Beta at the rate of Rs.144. This transfer price is less than current market price as there shall be savings of selling and distribution overheads. This price would give Alfa the same contribution as an external sale, i.e., Rs.60 per unit. Alfa would give Beta’s orders priority and so some of external orders would not be met.
Advise Winger Ltd under each of two scenarios:
(i) The tax rate in Alino is 30% and in Betanos is 50%(ii) The tax rate in Alino is 50% and in Betanos is 10%
(Assume that Division B generates sufficient profit from other activities to absorb tax benefits.) (ICWA Final)
Answer (i) The tax rate in Alino is 30% and in Betanos is 50%(ii) The tax rate in Alino is 50% and in Betanos is 10%
Statement showing change in profit under each of two scenarios(i) Scenario (ii) Scenario
Increase in contribution of Alpha 1,00,000x60 1,00,000x60Decrease in contribution of Beta -2,50,000x14 -2,50,000x14Increase in Tax liability of Alpha -18,00,000 -30,00,000Savings of Tax at Beta +17,50,000 +3,50,000
Change in post tax profit +25,50,000 -150,000
In first scenario, Beta may purchase 2,50,000 units of S from Alpha. In the second scenario, the status quo may be maintained.
Q. No. 9.20 A large business consultancy firm is organized in to several divisions. One of the divisions is the information technology (IT) division which provides consultancy services to its clients as well as to the other divisions of the firm. The consultants in the IT divisions always work in a team of three professional consultants on each day of consulting assignment. The external clients are charged a fee at the rate of Rs. 4,500 for each
36
consulting day. The fee represents the cost plus 150% profit mark up. The breakup of cost involved in the consultancy fee is estimated at 80% being variable and the balance is fixed.
The textiles division of the consultancy firm which has undertaken a big assignment requires the services of two teams of IT consultants to work five days in a week for a period of 48 weeks. While the director of the textiles division intends to negotiate the transfer price for the consultancy work, the director of IT divisions to charge the textiles divisions at Rs. 4,500 per consulting day.
In respect of the consulting work of the textiles division, IT division will be able to reduce the variable costs by Rs. 200 per consulting day. This is possible in all cases of internal consultation because of the use of specialized equipment.
You are required to explain the implications and set transfer per consulting day at which the It division can provide consultancy services to the textiles division such that the profit of the business consultancy firm as a whole is maximized in each of the following scenarios.(i) Every team of the IT division is fully engaged during the 48 week period in providing consultancy services to external clients and that the IT division has no spare capacity of consultancy teams to take up the textiles division assignment.(ii) IT division will be able to spare only one team of consultants to provide services to the textiles division during the 48 week period and all other teams are fully engaged in providing services to external clients.(iii) A new external client has come forward to pay IT division a total fee of Rs. 15,84,000 for engaging the services of two teams of consultants during the aforesaid period of 48 weeks. (CA Final Nov. 2008 CM)Answer
Working notes:Charge per day per team = Rs.4500 Let cost per day = xCharge per day = x + 1.50x = 4500x = 1800 = cost per team per dayVC per team per day = 1800 x 0.80 = 1440FC per team per day = 1800 x 0.20 = 360Contribution per team per day = 4500 – 1440 = 3060
(i) Transfer Price = cost to be incurred + contribution lost = 1440 -200 + 3060 = Rs.4300 per team per day
(ii) Charge for one team ( fully engaged) = 4300+ charge for one team ( idle) = 1240
Average charge per team per day = (4300 + 1240)/2 = Rs.2,770
(iii) Charge per team per day = 15,84,000 /(2 x 48x5) = Rs.3300Contribution per team per day = 3300 = 1440 = 1,860
37
Transfer price = cost to be incurred + contribution lost = 1440 -200 + 1860 = Rs.3100 per team per day
Q. No. 9.21 XYZ Ltd. has two divisions, A and B. Division A makes and sells product A which can be sold outside as well as be used by B. A has a limitation on production capacity that only 1,200 units can pass through its machining operations in one month. On an average about 10% of the units that A produces are defective. It may be assumed that out of each lot that A supplies, 10% are defectives.
When A sells in the outside market the defectives are not returned since the transportation costs make it uneconomical for the costumer instead A’s customers sell the defectives in the outside market at a discount.
But when B buys product A, it has to fix it into its product, which is reputed for its quality. Therefore B returns all the defective units to A. A can manually rework the defectives, incurring only variable labour cost and sell them outside at Rs. 150 and not having to incur any selling costs on reworked units. If A chooses not to rework, it can only scrap the material at Rs. 30 per unit. B can buy product A from outside at Rs. 200 per unit but has to incur Rs. 10 per unit as variable transport cost. B can insist to its outside suppliers also that it will accept only good units.
A incurs a variable selling overhead only on units (other than reworked units) sold outside. The following figures are given for the month.
Variable cost of production Dept. A (Rs./ Unit) 120Variable selling overhead (Rs/Unit) 20Selling price per unit in the outside market (Rs./u) 200Current selling price to B (Rs. /Unit) 190Additional variable labour cost of reworking defectives Rs./Unit 100Selling price of reworked defectives (Rs./Unit) 150Fixed costs for the month (Rs.) 36,000Maximum demand from B at present (No. of units) 630
The outside demand can be freely had up to 900 units.Given the demand and supply conditions, you are required to present appropriate calculations for the following.(i) Evaluation of the best strategy for A in the present condition.(ii) If B can buy only up to 540 units and the outside demand is only 600 units, how much should A charge B to maintain the same level of profit as in (i) above? (CA Final June 2009 AMA)
AnswerWorking note:Suppose A transfers 100 units to B.
38
Total Contribution = 90(190 -120) + 10(150 -120 -100) = Rs.5600Contribution per unit of transfer = Rs.56
Contribution per unit from outside sales = 200 – 120 – 20 = Rs.60
(i) A may sell 900 units in the market and transfer 300 units to B.Total contribution = 900x60 + 300x 56 = Rs.70,800.
(ii) “If B can buy only up to 540 units” We interpret this sentence as B’s requirement is 540. A shall be transferring 600 units to B.
Total contribution under (i) 70,800Contribution from outside sale of 600 units : 600x60Contribution from sale of 60 defective units -4,200 31,800 31,800Contribution from 540 units out of 600 transferred 39,000Contribution per unit from 540 units out of 600 transferred 72.2222VC per unit of transferred unit 120Transfer price 192.2222
Q. No. 9.22 M Ltd. makes two products X and Y, in their respective divisions. Each unit of Y needs one unit of X. Divisions X and Y are profit centers and can function according to their divisional interests.
In the external domestic market X can sell either 6000 units at Rs. 1,000 per unit or 5000 units at Rs. 1,120 per unit.X has a production capacity of 7000 units, with each unit requiring 2 hours.Y also has a production and demand of 7000 units.
Y can buy product X from outside as follows:Order quantity ( Units) Price for the entire order (Rs per unit)
6001-7000 9004001-6000 9202001-4000 1,000
0-2000 1,120
Y resorts to bulk purchase to avail maximum possible discount.(i) There is an export order that may either be fully accepted or fully rejected for X to supply 800 units Rs. 900 per unit.(ii) There is an offer to hire out X’s capacity of 1600 hours at Rs. 130 per hour. The hiring offer may either be fully accepted or fully rejected.(iii) Y will not buy from X at any price more than it will incur in the outside market. Y does not place restrictions on quantities to be supplied by X, provided its pricing condition is not violated.
39
Given that any one or more of the offers may be accepted, what will be X’s best strategy?What will be the corresponding transfer price?(A detailed cost statement is not essential only figures relevant for decision making are required to be considered under each analysis.) (CA Final Nov. 2010)
Answer
Alternatives for XAlternatives Domestic
marketExport Transfer Hiring out
(equivalent units)Transfer Price
(Working note1)1 6,000 800 200 9002 6,000 200 800 9003 5,000 800 400 800 9004 5,000 800 1200 ---- 803.335 5,000 1,200 800 803.336 5,000 2000 ----- 850
Working note 1
Transfer(Units)
Totalpayment
for 7000 units(A)
Payment for external purchase
(B)
Payment for transferred units
(A – B)
Transfer price
200 63,00,000(7000x900)
61,20,000(6800X900)
1,80,000 900
400 63,00,000 59,40,000(6600X900)
3,60,000 900
1200 63,00,000 53,36,000(5800X920)
9,64,000 803.33
2000 63,00,000 46,00,000(5000X920)
17,00,000 850
The decision can be taken on the basis of maximum contribution. For this, we require VC per unit. Let’s assume that VC per unit is Rs.500.
Statement showing contribution under each of six alternativesAlternative
sDomestic
marketSales (A)
ExportSales(B)
TransferReceipts
(C)
Hiring Charges
(D)
VC(E)
ContributionA+B+C+D-E
1 6,000x1000
800x900 1,80,000 35,00,000 34,00,000
2 6,000 1,80,000 208000 31,00,000 32,88,000
40
x10003 5,000
x1120800 x900 3,60,000 208000 31,00,000 37,88,000
4 5,000 x1120
800 x900 9,64,000 ---- 35,00,000 37,84,000
5 5,000 x1120
9,64,000 208000 31,00,000 36,72,000
6 5,000 x1120
17,00,000 ----- 35,00,000 38,00,000
Recommendation: Alternative 6 is recommended.
Q.No.9.23 AB Ltd makes component ‘C’ and billing machines. Division A makes component ‘C’ that is used in the final assembly of the machine in Division B. (One unit of component ‘C’ is used per machine). Component ‘C’ has an outside market also. Divisions A and B operate as profit centers and each division can take its own decisions. The following data is given in the existing scenario for division A and B, under which Division A has enough special and external demand to use its capacity and hence is offering B rates of Rs.800 per unit for quantity up to 750 units and Rs.900 per unit for more than 750 units, so that its outside contribution is not affected by transfer to B. A and B can sell any quantity up to the maximum indicated under ‘units sold’, without affecting their future demand.
Division A Division BExternal Market(Normal sales)
Special sales External Market(Normal sales)
Selling price Rs.1,000 Rs.800 Rs.4,000Variable manufacturing cost /unit Rs.600 Rs.600 Rs.1500*
*excluding component ‘C’
Variable selling cost /unit Rs.100** Rs.200**
**Not incurred on inter division transfers
Total variable cost /unit
Rs.700 Rs.600 Rs.1700* *excluding component ‘C’
Contribution /unit
Rs.300 Rs.200
Units sold 1250 750 900Production capacity 2000 units 900 units
For the next period, A requires for its own use in its selling outlets, 50 units of billing machines produced by B. B’s manager proposes as follows:
41
Option I B will supply 50 machines to A on its variable manufacturing cost basis provided A supplies to B, 500 units of component ‘C’ at A’s variable manufacturing cost basis.
Option II Both A and B resort to total variable cost per unit basis applicable to normal external sales, though neither A nor B incurs any selling cost on inter division transfers. A will be given 50 machines for its use. A will have to supply B all the 900 units that B requires.Option III Both A and B use the external market selling price (i.e. Rs.1000 and Rs.4000 per unit for 900 units of component ‘C’ and 50 units machines respectively. From a financial perspective, advise Division A’s manager what he should choose. Support your advice with relevant figures. What is the change in the rate of discount per unit given by B to A (based on unit transfer price to market price ratio) from Option I to Option II?(Note: Students need not work out the total cost statements. Steps showing relevant figures for evaluation are sufficient) (CA Final May 2012)
Answer :
Cost Benefit Analysis of each of three options Option I
Cost BenefitContribution Lost on 500 units @ Rs.200 1,00,000Savings on purchase of 50 Billing machines @ Rs.1900 95,000Net Benefit (Rs.5,000)
Option IIContribution Lost on 750 units @ Rs.100 75,000Contribution lost on 150 units @ Rs.200 30,000Savings on purchase of 50 Billing machines @ Rs.1600 80,000Net Benefit (Rs.25,000)
Option IIIIncreased amount of contribution on 150 units @Rs.100 15,000Increased amount of contribution on 750 Units @ Rs.200 1,50,000Cost NilNet benefit Rs.1,65,000
Option III is recommended.
Q.No.9.24 In a company, Division A makes a product A and Division B makes product B. One unit of A needs one unit of B as input. State the unit transfer price to be adapted by the transferring Division A to B in each of the following independent situations:
(i) There is ready market for A. There are no constraints for production or demand for A and A does not incur any external selling cost.
42
(ii) Supply is more than demand for A. External market resorts to distress price for A and this is expected to last for a temporary period. The product cannot be stocked until better times.
(iii) Product A highly specialized. Internal specifications are too many that B has to only buy from A.
(iv) A has excess capacity. It can transfer any quantity to B. goal congruence is to be achieved.
(v) A has no spare capacity, has adequate demand in a competitive market. But on units transferred to B, it incurs Rs 10 per unit as additional transport cost and Rs 10,000 as fixed expenses irrespective of the number of units transferred.
(Candidates need not copy the above situations into their answer books) (CA Final N0v.2011)Answer:
(i) Market price(ii) Market price per unit or Variable Cost per unit , whichever is higher(iii) Price based on profit shared method (iv) Variable cost per unit (v) VC + contribution lost ( if any)(vi) Market price + Rs.10 + (Rs.10,000/No. of units transferred)
Q.No.9.25 PEX is a manufacturing company of which division PQR manufactures a single standardized product. Some of the output is sold externally whilst the remainder is transferred to division RPQ where it is a subassembly in the manufacture of that division’s product. PQR has the capacity (annual) to produce 30,000 unit of the product. The unit costs of division PQR’s product areas under:
Direct material Rs.40
Direct Labour Rs.20 Variable manufacturing overheads Rs.20
Fixed manufacturing overheads Rs.40 Selling expenses variable Rs.10 Total Rs.150
Annually 20,000 units of the product are sold externally at the standard price of Rs. 300 per unit. In addition to the external sales, 10,000 units are transferred annually to division RPQ at an internal transfer price of Rs. 290 per unit. This transfer price is obtained by deducting variable selling and packing expenses from the external price since those expenses are not incurred for internal transferred.
Division RPQ incorporates the transferred-in goods into a more advanced product. The unit costs (Rs.) of this product are as follows:
Transferred-in-item (from division PQR) 290Direct material and components 230Direct labour 30
43
Variable overheads 120Fixed overheads 120Selling and packing expenses-variable 10Total 800
Division RPQ’S manager disagrees with the basis used to set the transfer price. He argues that the transfers should be made at variable cost plus an agreed (minimal) mark up because his divisions is taking output that division PQR would be unable to sell at the price of Rs. 300. Partly because of this disagreement, a study of the relationship between selling price and demand has recently been carried out for each division by the company’s sales director. The study has brought out the following demand schedule:
Division PQRSelling price (Rs.) 200 300 400Demand units 30,000 20,000 10,000
Division RPQSelling price (Rs.) 800 900 1,000Demand units 14,400 10,000 5,600
The manager of the division RPQ claims that this study supports his case. He suggests that a transfer price of Rs 120 would give division PQR a reasonable contribution to its fixed overheads while allowing division RPQ to earn a reasonable profit. He also believes that it would lead to an increase of output and an improvement in the overall level of company profits.Calculate the effect of the transfer price of Rs290 per unit on company’s operating profit. Calculate the optimal product mix. Advise the company on whether the transfer price should be revised to Rs 120 per unit. (CA Final Nov. 2012)
Answer Working notes
(i) Variable production Cost per unit (PQR) = 40 +20+20+20 = 100(ii) Variable production Cost per unit (RPQ) exclusive of cost of transfer from PQR
= 230 +30+120 = 380Main AnswerAccounting Information for decision regarding optimal product MixThree alternatives:
To External market To RPQ TotalA 20,000 10,000 30,000B 15,600 14,400 30,000C 20,000 5,600 25,600
Statement showing profit under each of three alternatives
44
A B CExternal sales
Total
20,000x30010,000x9001,50,00,000
15,600x30014,400x8001,62,00,000
20,000x3005,600x10001,16,00,000
Variable production cost PQRVariable production cost RPQVariable Selling overheads FC (PQR)FC(RPQ)Total
30,000x 10010,000 x 38030,000 x 1012,00,00012,00,00095,00,000
30,000x 10014,400 x 38030,000 x 1012,00,00012,00,000
1,11,72,000
25600 x1005600x38025600x1012,00,00012,00,00073,44,000
Profit 55,00,000 50,28,000 42,56,000
Alternative A is recommended. 20000 units may be sold in the external market and 10,000 units may be transferred to RPQ.
Statement showing profit of each of PQR and RPQ and company as a whole (Transfer price Rs.290)
PQR RPQ Company as a wholeExternal sales Transfer
20,000 x30010,000 x 290
10,000x900 1,50,00,000
Total revenue (A) 89,00,000 90,00,000 1,50,00,000Variable production costVariable selling cost Transfer FC
30,000x10020,000 x 10-------------12,00,000
10,000 x 38010,000 x10
10,000 x29012,00,000
68,00,0003,00,000----------
24,00,000Total cost (B) 44,00,000 80,00,000 95,00,000Profit (A – B) 45,00,000 10,00,000 55,00,000
Statement showing profit of each of PQR and RPQ and company as a whole (Transfer price Rs.120)
PQR RPQ Company as a wholeExternal sales Transfer
20,000 x30010,000 x 120
10,000x900 1,50,00,000
Total revenue (A) 72,00,000 90,00,000 1,50,00,000Variable production costVariable selling cost Transfer FC
30,000x10020,000 x 10-------------12,00,000
10,000 x 38010,000 x10
10,000 x12012,00,000
68,00,0003,00,000----------
24,00,000Total cost (B) 44,00,000 63,00,000 95,00,000Profit (A – B) 28,00,000 27,00,000 55,00,000
45
CONCLUSION Change in transfer price from Rs.290 to Rs.120 will have no impact on the profit of the company as a whole. It will, however, have impact on the individual profitability of the divisions. As Division PQR is able to fully utilize its capacity only because of transfer to units to RPQ, the logic forwarded by RPQ is worth consideration. Transfer price should be reduced either through negotiation or the higher level management may do so on some suitable basis , say the transfer price may be determined on shared profit basis.
THEORETICAL QUESTIONS
Q.No.9.1T. Enumerate the main objectives of transfer pricing. (CA Final Nov. 2002)What are some goals of a transfer –pricing system in an organization? (CA Final may 2006)Answer : Please refer to paragraph 9.2,
Q.No.9.2T. Outline the limitations of negotiated method of transfer pricing. (CA Final May 2003)
Answer : Please refer to paragraph 9.3-4.
Q.No.9.3T. Briefly describe the different methods of Transfer Pricing. (CA Final Nov. 2005)Answer : Please refer to paragraphs 9.3 and 9.3-1 to 9.3-4