6 key takeaways for the state of 3d printing - 2016
TRANSCRIPT
SIX KEY TAKEAWAYS FROM
The data you need to understand the 3D Printing world and build your 3D Printing strategyMAY 2016
THE STATE OF 3D PRINTING
I am very pleased to announce the second edition of The State of 3D Printing. The aim of our survey is simple: to bring together most of 3D Printing’s users. We asked what they do, why they do it, how they do it, and if it’s working. For me, this second measure represents a very special edition for several reasons.
First, the enthusiasm and the thousands of returns we’ve had on the first edition have allowed us to validate the interest of our approach. I would also like to thank each of you for your support and your input.
Thanks to you, we have once again developed the biggest statistical study on the uses and challenges of 3D Printing in the professional world. Almost 1000 participants responded and shared their experience and expectations. They come from all professions in every industry, bringing incomparable depth to this survey.
Finally, this 2nd edition has allowed us to make a comparison that I invite you to discover: there is much to learn about the evolution of our industry from the users’ point of view between 2015 and 2016.
As we know, 3D Printing is creating less enthusiasm in the media than even 20 months ago. However, the survey respondents are as convinced as we are. This technology is not only promising for tomorrow, but it’s also wonderful today because of the many economic benefits that users get from it every day.
In addition to the 2015/2016 evolution, we have made several changes to our report. In response to your remarks we have:• done a better job in distinguishing professional uses from casual hobby uses. We have clearly focused our analysis on the professional respondents to our study.• granted a large portion to the best practices in 3D Printing by devoting an entire chapter to the behavior of power users.• developed sector-specific analysis to give you a way to better compare yourself to your peers.
Like last year, you’ll find 4 sections in the report:• Trends for 2016 have been gathered from every respondent and comprise the majority of the study• Executing a 3D Printing strategy takes a detailed, practical look at the habits of “power users”• The evolution insights section compares and contrasts the habits of users between 2015 and 2016• The sector-specific insights allow you to compare yourself to others within your industry
All of these attempts to provide you with practical information that will help you in your company’s development.
If you would like to see how you stack up compared to the panel, I invite you to visit our study at www.sculpteo.com/en/state-of-3D-printing. The study will be open throughout 2016. I hope you enjoy reading this new State of 3D Printing!
FOREWORD
CLÉMENT MOREAUCEO & FOUNDER
THE STATE OF 3D PRINTING - 2016 2
THE 6 TAKE-AWAYS FROM THE STATE OF 3D PRINTING
AFRICA0.9%
EUROPE64%
AMERICA30%
ASIA & OCEANIA5.1%
1,000 RESPONDENTS
> $20M/y
≤ $20M/y
≤ $5M/y
≤ $1M/y
≤ $500K/y
≤ $100K/y
≤ $50K/y
pre-revenue
SAMPLE COMPOSITION
COMPANY SIZEBY ANNUAL REVENUE
9%
10%
7%
11%
11%
18%
28%
The principal objective of Sculpteo’s 2016 State of 3D Printing report is to share the collection of data we received from our participants in one global study. With that objective in mind we collected data across the 3D Printing Industry to make an analysis on how businesses and individuals are using this cutting edge technology.
THE STATE OF 3D PRINTING - 2016 3
7%
THE 6 TAKE-AWAYS FROM THE STATE OF 3D PRINTING
VERTICAL MARKETS
CONSUMERGOODS21%
AUTOMOTIVE3%
INDUSTRIALGOODS14%
SAMPLE COMPOSITION
It is worth noting that the majority of respondents consider themselves to be identified as Owners or CEOs (28%) followed by Engineers (23%), these are followed by Freelancers (13%) and Designers (11%).
THE STATE OF 3D PRINTING - 2016 4
HIGH TECH14%
SERVICES8%
ELECTRONIC& ELECTRIC5%
HIGHEREDUCATION4%
ENTERTAINMENT5%
HEALTHCARE3%
AERONAUTIC& AEROSPACE3%
MECHANIC& METAL3%
CONSTRUCTION2%
RETAIL2%
MARITIME1%
GARMENT1%
ENERGY1%
THE 6 TAKE-AWAYS FROM THE STATE OF 3D PRINTING
SPENDING ON 3D PRINTING KEEPS INCREASINGTHE 6 TAKE-AWAYS FROM THE STATE OF 3D PRINTING
$6,132is the average budget for 2015
compared to $3,736 in 2014
THE STATE OF 3D PRINTING - 2016 5
+77%of respondents affirmedthey would increase their spending onadditive manufacturing in 2017
+93%consider 3D Printing as a competitive advantage in their strategy
+80%of the respondents were alreadyusing 3D Printing last year
21%
27%
2%
50%
67%
55%
30%
41%29% 25%
50%
24%
8% 11%6% 12%
16%
12%
28%
30%
5%
11%
13%6%
PROTOTYPE
PROOF OF CONCEPT
PRODUCT
ION
EDU
CATI
ON
MARKETING SAMPLE
HOBBY
ART
OTH
ER
6
SHIFT TO PRODUCTION DRIVES GROWTHTHE 6 TAKE-AWAYS FROM THE STATE OF 3D PRINTING
2016 Professionals from 2016
Participants were asked to declare “the purposes of their 3D prints”. It was possible to choose multiple answers.
2015
Uses of 3D Printing
THE STATE OF 3D PRINTING - 2016
PLASTIC DOMINATES MATERIAL USAGETHE 6 TAKE-AWAYS FROM THE STATE OF 3D PRINTING
THE STATE OF 3D PRINTING - 2016 7
Plas
tics
73% 26% 23% 13% 8% 8% 4%
Resin
s
Metals
Multico
lore/
Sand
stone
Cera
mics
Wax
Other
TOP 3D PRINTING MATERIALS
Plastic is still the leader when it comes to materials used in 3D Printing (73%). Resins and metals, compared to plastic, rank far behind. Plastic parts are still the cheapest to produce, and prototyping, which is mainly done in plastic, is one of the top applications of 3D Printing.
TECHNOLOGY DIVERSITY INDICATES EVOLUTION TOWARD 3D PRINTING
THE 6 TAKE-AWAYS FROM THE STATE OF 3D PRINTING
THE STATE OF 3D PRINTING - 2016 8
Selec
tive L
aser
Sint
ering
(SLS
)
38% 31% 14% 7%3%
Fuse
d Dep
ositi
on M
odeli
ng
Ster
eolit
hogr
aphy
(SLA
)Mult
ijet/P
olyjet
Digita
l Ligh
t Pro
cess
ing (D
LP)
Direct
Metal
Lase
r Sint
ering
(DMLS
)
Selec
tive D
epos
ition
Lamina
tion (
SDL)
Bind
er Je
tting
Electr
on B
eam M
elting
(EBM
)
Lamina
ted O
bject
Manuf
actu
ring (
LOM)
2%
TOP 3D PRINTING TECHNOLOGIES
1%1%2%3%
The selective laser sintering (SLS) technology is an undeniable favorite among our participants. Fused deposing modeling (FDM) and SLS both use plastics, which helps their ranking. Stereolithography (SLA), which uses resins, is the next most common technology.
3D PRINTING ADOPTION DRIVEN BY MACHINE CONSISTENCY AND SUPPLY COSTS
THE 6 TAKE-AWAYS FROM THE STATE OF 3D PRINTING
THE STATE OF 3D PRINTING - 2016 9
MATERIAL & SUPPLY COST
MACHINE CONSISTENCY & CAPABILITIES
58%
31%
11%
very important somewhat important not important
DETERMINING FACTORS IN THE ADOPTION OF 3D PRINTING
70%
27%
4%
While focusing on the key factors for the professional in their 3D Printing activities, 72% consider the machine capabilities and consistency of the 3D Printing parts as very important. Also 56% of our respondents consider supply costs and material investment as determining factors.
THREE BIG IDEAS DRIVE 3D PRINTINGTHE 6 TAKE-AWAYS FROM THE STATE OF 3D PRINTING
THE STATE OF 3D PRINTING - 2016 10
Innovation: Respondents see new materials and new techniques growing in importance.
Efficiency: Respondents separated efficiency into two distinct dimensions. First, speed of the machinery such as fast SLA with DLP, CLIP technology and other fast resin printers. Second, better quality, with better resistance of materials and smooth surfaces, are among the efficiency improvements sought by users.
Democratization: Respondents want to see democratization continue toward simplistic software that makes 3D creation, manipulating, and printing super easy for the average user, along with better user interfaces.
23%INNOVATION
19%EFFICIENCY
19%DEMOCRATIZATION
STATE OF 3D PRINTING 2016 The data you need to understand the 3D Printing world and build your 3D Printing strategy
YOU CAN ACCESS THE ENTIRE
THE STATE OF 3D PRINTING - 2016 11
DIRECTLY FROM OUR WEBSITEhttps://www.sculpteo.com/en/get/report/state_of_3D_printing_2016/
FRANCE10 Rue Auguste Perret94800 Villejuif - France
+33 1 83 64 11 22
U.S169 11th Street
San Francisco, CA 94103+1-800-814-1270
www.sculpteo.com