5g nsa for saegw - cisco...standalone(nsa). configure contextcontext_name pgw-serviceservice_name...

5G NSA for SAEGW

• Feature Summary and Revision History, on page 1• Feature Description, on page 2• How It Works, on page 3• Configuring DCNR, on page 6• Monitoring and Troubleshooting, on page 10

Feature Summary and Revision HistorySummary Data

• P-GW

• S-GW

• SAEGW

Applicable Product(s) or Functional Area

• ASR 5000

• ASR 5500

• VPC-DI

• VPC-SI

Applicable Platform(s)

Disabled - Configuration RequiredFeature Default

Not applicableRelated Changes in This Release

5G NSA for SAEGW1

• 5G Non Standalone Solution Guide

• AAA Interface Administration and Reference

• Command Line Interface Reference

• P-GW Administration Guide

• S-GW Administration Guide

• SAEGW Administration Guide

• Statistics and Counters Reference

Related Documentation

Revision History

ReleaseRevision Details

21.5The 5G NSA solution is qualified on the ASR5000 platform.

21.8The 5G NSA solution is enhanced to support:

• Feature License

• Dedicated bearers

• Gy interface support

• URLLC QCI support

• Show output commands enhanced

21.6First introduced.

Feature Description

5G NSA requires a separate feature license from release 21.8 onwards. For more information on licenses,contact your Cisco Account representative

Important

5G radio offers downlink data throughput up to 20Gbps and uplink data throughput up to 10Gbps. Some ofthe interfaces in EPC are capable of handling (encode or decode) 5G throughput ranges. Example, NASsupports up to 65.2 Gbps (APN-AMBR) and S5/S8/S10/S3 (GTP-v2 interfaces) support up to 4.2 Tbps. Thediameter interfaces S6a and Gx support only up to 4.2Gbps throughput, S1-AP supports only up to 10 Gbpsand NAS supports up to 10 Gbps (MBR, GBR). New AVP/IE have been introduced in S6a, Gx , S1-AP, andNAS interfaces to support 5G throughput rates

Dual Connectivity with New Radio (DCNR) supports the following functionality:

• Supports configuration of DCNR feature at the P-GW-service.

• Supports configuration of “Extended-BW-NR” feature in IMSA service.

5G NSA for SAEGW2

5G NSA for SAEGWFeature Description

• Advertises the DCNR feature support by sending “Extended-BW-NR” feature bit in “Feature-List-ID-2”towards PCRF.

• Forwards AVP "Extended-APN-AMBR-UL" and "Extended-APN-AMBR-DL" in CCRmessages whenit receives APN-AMBR values greater than 4.2Gbps from MME/S-GW.

• Decodes the extended AVP "Extended-APN-AMBR-UL" and "Extended-APN-AMBR-DL" when it isreceived from PCRF.

• Sends AVP "Extended-Max-Requested-BW-UL", "Extended-Max-Requested-BW-DL","Extended-GBR-UL" and "Extended-GBR-DL" when it receives MBR and GBR values greater than4.2Gbps from MME/S-GW.

• Decodes the AVP "Extended-Max-Requested-BW-UL", "Extended-Max-Requested-BW-DL","Extended-GBR-UL" and "Extended-GBR-DL" when received from PCRF.

• Supports dedicated bearer establishment with extended QoS.

• Sends AVP Extended-Max-Requested-BW-UL and "Extended-Max-Requested-BW-DL" in Gy records.

• Supports 5G requirements of ultra-low latency. 3GPP introduced URLLC QCI 80 (Non-GBR resourcetype), QCI 82 and 83 (GBR resource type). P-GW establishes default bearers with URLLC QCI 80,which is typically used by low latency eMBB applications. P-GW establishes dedicated bearers withURLLC QCI 82 and 83 (also with QCI 80 if dedicated bearers of Non-GBR type to be established),which is typically used by discrete automation services (industrial automation).

• Dynamic S-GW and P-GW selection byMME for DCNR capable UE.WhenDCNR capable UE attemptsto register in MME and when all DCNR validations are successful (for example DCNR featureconfiguration on MME, HSS not sending access-restriction for NR, and son on), the MME sets “UPFunction Selection Indication Flags” IE with DCNR flag set to 1 in “Create Session Request” message.This feature is relevant for CUPS architecture to help SGW-C and PGW-C to select SGW-U and PGW-Uwhich supports dual connectivity with NR. When S-GW receives this IE over S11, it sends this IE overS5 to P-GW. S-GW ignores IE if it receives it in Non-CUPS deployement.

How It Works

ArchitectureThis section describes the architecture for Gx (PCRF) with respect to DCNR feature.

Gx (PCRF)

Gx interface introduced new "AVP Extended-APN-AMBR-UL" and "Extended-APN-AMBR-DL" in grouped"AVP QoS-Information" and "Conditional-APN-Aggregate-Max-Bitrate" to handle 5G throughput range fordefault bearers. To handle 5G throughput range for dedicated bearers, new AVP "Extended-GBR-UL","Extended-GBR-DL", "Extended-Max-Requested-BW-UL" and "Extended-Max-Requested-BW-DL" havebeen introduced in grouped AVP QoS-Information.

When the maximum bandwidth value set for UL (or DL, respectively) traffic is higher than 4294967295 bitsper second, the "Max-Requested-Bandwidth-UL" (or DL, respectively) AVP should be present, and set to itsupper limit 4294967295 along with the "Extended-Max-Requested-BW-UL" (or -DL, respectively) should

5G NSA for SAEGW3

5G NSA for SAEGWHow It Works

be present, and set to the requested bandwidth value in kilobits per second. The same principal applies for"Extended-GBR-UL/DL" and "Extended-APN-AMBR-UL/DL".

Following new AVPs have been introduced under the grouped AVP QoS-Information:

• Extended-Max-Requested-BW-UL

• Extended-Max-Requested-BW-DL

• Extended-GBR-UL

• Extended-GBR-DL

• Extended-APN-AMBR-UL

• Extended-APN-AMBR-DL

Following newAVPs have been introduced under the grouped AVPConditional-APN-Aggregate-Max-Bitrate

• Extended-APN-AMBR-UL

• Extended-APN-AMBR-DL

Gy (OCS)

Gy interface has introduced new AVP "Extended-Max-Requested-BW-UL" and"Extended-Max-Requested-BW-DL" in grouped AVP “QoS-Information” to handle 5G throughput rangesfor dedicated bearers. Though 3GPP specification 32.299 mentioned about "Extended-GBR-UL/DL" and"Extended-APN-AMBR-UL/DL", they are not applicable to Gy implementation.

When the maximum bandwidth value is set for UL/DL traffic is higher than 4294967295 bits per second,P-GW sets the "Max-Requested-Bandwidth-UL/DL" AVP to its upper limit 4294967295 and sets the"Extended-Max-Requested-BW-UL/DL" to the required bandwidth value in kilobits per second inCCR-I/CCR-U messages.

NSA feature has been extended to only standard Gy dictionary dcca-custom13.

LimitationsThis section describes the known limitations for DCNR:

• 5G NSA feature is implemented only for Gx standard dictionary (r8-gx-standard).

• 5G NSA feature has been implemented only for Gy standard dictionary "dcca-custom13". In order tosupport NSA feature for other Gx and Gy dictionaries, dynamic dictionary must be built. Contact yourCisco Account representative for more details.

• In this release, ICSR support for this feature is not available.

• When PCRF sends "Extended-Max-Requested-BW-UL/DL" AVP, it is expected to send"Extended-Max-Requested-BW-UL/DL" with maximum value: 4294967295 bps. When"Extended-Max-Requested-BW-UL/DL" AVP is present, P-GW ignores the received value in"Max-Requested-Bandwidth-UL/DL" AVP and assume it to be 4294967295 bps.

• When PCRF sends "Extended-GBR-UL/DL" AVP, it is expected to send "Extended-GBR-UL/DL" withmaximum value 4294967295 bps. When "Extended-GBR-UL/DL" AVP is present, P-GW ignores thereceived value in "Guaranteed-Bitrate-UL/DL" AVP and assume it to be 4294967295 bps.

5G NSA for SAEGW4

5G NSA for SAEGWLimitations

FlowsThis section describes the following call flows related to the DCNR feature.

Initial Registration by DCNR Capable UE

1. DCNR capable UE sets “DCNR bit” in NAS message “Attach Request” in “UE Network Capability”IE.

2. MME successfully authenticates the UE.

3. As part of authorization process, while sending ULR to HSS, MME advertises the DCNR support bysending “NR as Secondary RAT” feature bit in “Feature-List-ID-2”.

4. HSS sends ULA by advertising the DCNR by sending “NR as Secondary RAT” feature bit in“Feature-List-ID-2” and sends Max-Requested-Bandwidth-UL as 4294967295 bps,Max-Requested-Bandwidth-DL as 4294967295 bps and the extended bandwidth values in new AVPs"Extended-Max-Requested-BW-UL" and "Extended-Max-Requested-BW-DL".

If HSS determines that the UE is not authorized for DCNR services, HSS sends Subscription-Data with“Access-Restriction” carrying “NR as Secondary RAT Not Allowed”.

5. MME sends Create Session Request with the extended APN-AMBR values in existing AMBR IE. Asthe APN-AMBR values in GTP-v2 interface are encoded in kbps, existing AMBR IE handles the5G-NSA bit rates.

6. PGW sends CCR-I to PCRF advertising the DCNR by sending “Extended-BW-NR” feature bit in“Feature-List-ID-2”. PGW also sends "APN-Aggregate-Max-Bitrate-UL" as 4294967295 Bits/Sec,"APN-Aggregate-Max-Bitrate-DL" as 4294967295 Bits/Sec and the extended bandwidth values in newAVPs "Extended-APN-AMBR-UL" and "Extended-APN-AMBR-DL".

7. PCRF sends CCA-I advertising the DCNR by sending “Extended-BW-NR” feature bit in“Feature-List-ID-2”. PCRF also sends APN-Aggregate-Max-Bitrate-UL as 4294967295 bps and"APN-Aggregate-Max-Bitrate-DL" as 4294967295 bps and the extended bandwidth values in new"AVPs Extended-APN-AMBR-UL" and "Extended-APN-AMBR-DL". PCRF may offer the sameextended APN-AMBR values requested by PCEF or may modify the extended APN-AMBR values.PGW enforces the APN-AMBR values accordingly.

5G NSA for SAEGW5

5G NSA for SAEGWFlows

8. PGW honors the APN-AMBR values as offered by PCRF and sends the extended APN-AMBR valuesin existing IE APN-AMBR in the Create Sesssion Response.

9. MME computes the UE-AMBR values and sends the extendedUE-AMBR values in new IEs “ExtendedUEAggregateMaximumBit Rate Downlink” and “ExtendedUEAggregateMaximumBit Rate Uplink”also by setting the legacy “UE AMBR Uplink” and “UE AMBR Downlink” values to the maximumallowed value 10000000000 bps(10 Gbps) in “Initial Context Setup Request”.

MME sends the APN-AMBR values up to 65.2 Gbps in existing IE APN-AMBR in NAS ActivateDefault EPS Bearer Context Request – Attach Accept. If the APN-AMBR values are beyond 65.2 Gbps,MME sends the extended APN-AMBR values in new IE “Extended APN aggregate maximum bit rate”

If ULA is received with “Access-Restriction” carrying “NR as Secondary RAT Not Allowed”, MMEsends the “Initial Context Setup Request” with “NR Restriction” bit set in “Handover Restriction List”IE. Also MME sets the "RestrictDCNR" bit to "Use of dual connectivity with NR is restricted" in theEPS network feature support IE of the ATTACH ACCEPT message. Accordingly, UE provides theindication that dual connectivity with NR is restricted to the upper layers.

If DCNR feature is not configured at MME-service or call-control-profile level, MME sets theRestrictDCNR bit to "Use of dual connectivity with NR is restricted" in the EPS network feature supportIE of the ATTACH ACCEPT message. Accordingly, UE provides the indication that dual connectivitywith NR is restricted to the upper layers.

10. eNodeB sends Initial Context Setup Response. If master eNodeB determines to establish the bearer onsecondary eNodeB, F-TEID of secondary eNodeB may be sent in this step (Transport layer address andTEID of secondary eNodeB). It is transparent to MME if the bearer is established on master eNodeBor secondary eNodeB.

11. eNodeB sends Uplink NAS Transport with NAS message Attach Complete - Activate Default EPSBearer Context Accept.

12. MME sends Modify Bearer Request to SGW with S1-U FTEID details as received in Initial ContextSetup Response.

13. MME receives Modify Bearer Response from SGW.

Supported StandardsThe 5G Non-Standalone(NSA) feature complies with the following standards:

• 3GPP 23.401 Release 15.2.0 - General Packet Radio Service (GPRS) enhancements for Evolved UniversalTerrestrial Radio Access Network (E-UTRAN) access

• 3GPP 29.212 Release 15.2.0 - Policy and Charging Control (PCC)

• 3GPP 29.274 Release 15.2.0 - 3GPP Evolved Packet System (EPS); Evolved General Packet RadioService (GPRS) Tunneling Protocol for Control plane (GTPv2-C); Stage 3

Configuring DCNRThis section provides information on CLI commands available in support of this feature.

5G NSA for SAEGW6

5G NSA for SAEGWSupported Standards

Enabling DCNR in P-GW ServiceUse the following configuration to enable Dual Connectivity with New Radio (DCNR) to support 5G NonStandalone (NSA).

configurecontext context_name

pgw-service service_name

[ no ] dcnrend

NOTES:

• pgw-service service_name : Configures the P-GW Service. service_name must be an alphanumericstring of 1 to 63 characters.

• no: Disables the DCNR configuration.

Configuring Extended Bandwidth with New RadioUse the following configuration in Policy Control Configuration to enable this feature.


ims-auth-service ims_auth_service_name

policy-controldiameter encode-supported-features extended-bw-newradio[ no ] diameter encode-supported-featuresend

NOTES:

• ims-auth-service ims_auth_service_name: Configures IMSAuth Service. ims_auth_service_namemustbe a string from 1 to 63.

• policy-control: Configures policy-control configuration.

• extended-bw-newradio: Enables Extended Bandwidth with New-Radio feature.

• no: Disables all the supported-features configured if any.

Configuring URLCC QCI in QCI QOS Mapping TableUse the following configuration in PGW Service configuration mode to enable this feature.

configureqci-qos-mapping qci_qos_mapping_name

[ no ]qci qci_value

end

Notes:

• qci-qos-mapping qci_qos_map_name: Specifies the map name.

5G NSA for SAEGW7

5G NSA for SAEGWEnabling DCNR in P-GW Service

• qci qci_val: Specifies the QoS Class Identifier. qci_valMust be an integer between 1-9, or 65, 66, 69,70, 80,82,83 - integer between 1-83

• no: Disables the QCI value.

Configuring URLCC QCI in Charging ActionUse the following configuration in PGW Service configuration mode to enable this feature.

configureactive-charging service service_name

charging-action charging_action

qos-class-identifier qos_class_identifier

no qos-class-identifierend

NOTES:

• qos-class-identifierqos_class_identifier: Specifies the QoS Class Identifier. qos_class_identifierMustbe an integer between 1-9, or 128-254 , or 65, 66, 69, 70, 80,82,83 - integer between 0-255.

• no: Disables the QoS Class Identifier.

Configuration URLLC QCI in Qos-Rate-Limit ConfigurationUse the following configuration in PGW Service configuration mode to enable this feature.


apn apn_name

qos rate-limit direction { downlink | uplink } qci qci_val

no qos rate-limit direction { downlink | uplink }end

Notes:

• qos rate-limit direction : Configures traffic policing that PGW will perform.

• direction : Specifies direction of traffic on which this QoS configuration needs to be applied.

• downlink : Apply the specified limits and actions to the downlink

• uplink : Apply the specified limits and actions to the uplink

• qci qci_val: Specifies the QoS Class Identifier. qci_valMust be an integer between 1-9, or 80,82,83 -integer between 1-83

• no: Disables the QoS rate limit.

Configuring Setup/Teardown Support for URLLC QCIUse the following configuration in PGW Service configuration mode to enable this feature.

5G NSA for SAEGW8

5G NSA for SAEGWConfiguring URLCC QCI in Charging Action

configuretransaction-rate nw-initiated-setup-teardown-events qci qci_val

no transaction-rate nw-initiated-setup-teardown-events qciend

Notes:

• transaction-rate : Configures Transaction Rate specific parameters

• nw-initiated-setup-teardown-events : Configures nw-initiated-setup-teardown-events specific parameters.

• downlink : Apply the specified limits and actions to the downlink

• uplink : Apply the specified limits and actions to the uplink

• qci qci_val: Specifies the QoS Class Identifier. Configures QCI's for which these events needs to beincremented. qci_valMust be an integer between 1-9, or 65, 66, 69, 70, 80,82,83 - integer between 1-254.

• no: Disables the Transaction Rate specific parameters.

Configuring QCI based Duration Statistics Support for URLLC QCIUse the following configuration in PGW Service configuration mode to enable this feature.


apn apn_name

[ no ] bearer-duration-stats qci qci_val

end

Notes:

• bearer-duration-stats : Enables or disables per QCI call duration statistics for dedicated bearers.

• qci qci_val: Specifies the QoS Class Identifier. qci_valMust be an integer between 1-9, or 80,82,83 -integer between 1-83

• no: Disables per QCI call duration statistics.

Configuring QCI based EGTPC-QCI-Stats Support for URLLC QCIUse the following configuration in PGW Service configuration mode to enable this feature.


apn apn_name

[ no ] egtpc-qci-stats { qci80 | qci82 | qci83 }default egtpc-qci-stats

end

Notes:

• egtpc-qci-stats : Enables/disables an APN candidate list for the apn-expansion bulkstats schema.

• qci80 : Configure apn-qci-egtpc stats for qci-80.

5G NSA for SAEGW9

5G NSA for SAEGWConfiguring QCI based Duration Statistics Support for URLLC QCI



• no : Disables per QCI call duration statistics.

• default: Sets the default value of APN candidate list for the apn-expansion bulkstat schema.

Monitoring and TroubleshootingThis section provides information on how to monitor and troubleshoot the DCNR feature.

Show Commands and OutputsThis section provides information on show commands and their corresponding outputs for the DCNR feature.

show pgw-service name

The following new fields are added to the output of this command:

• DCNR

show ims-authorization service name


Diameter Policy Control:

Supported Features:

• extended-bw-nr

show gtpu statistics


QCI 80:

Uplink BytesUplink Packets

Downlink BytesDownlink Packets

Bytes DiscardedPackets Discarded

QCI 82:




QCI 83:

5G NSA for SAEGW10

5G NSA for SAEGWMonitoring and Troubleshooting




show apn statistics all


4G Bearers Released By Reasons:

QCI83QCI82QCI80

000Admin disconnect

QCI 80:

Bearer setupBearer Active

Bearer RejectedBearer Released

Downlink Bytes forwardedUplink Bytes Forwarded

Downlink pkts forwardedUplink pkts forwarded

Downlink Bytes droppedUplink Bytes dropped

Downlink pkts droppedUplink pkts dropped

Downlink Bytes dropped(MBR Excd)Uplink Bytes dropped(MBR Excd)

Downlink pkts dropped(MBR Excd)Uplink pkts dropped(MBR Excd)

QCI 82:









QCI 83:



5G NSA for SAEGW11

5G NSA for SAEGWShow Commands and Outputs







show pgw-service statistics all verbose


Bearers By QoS characteristics:

Setup:Active:

QCI 80QCI 80

QCI 82QCI 82

QCI 83QCI 83

Released:

QCI 80

QCI 82

QCI 83

Data Statistics Per PDN-Type:

Downlink Packets:Uplink Packets:

QCI 80QCI 80

QCI 82QCI 82

QCI 83QCI 83

Bytes:Bytes:

QCI 80QCI 80

QCI 82QCI 82

QCI 83QCI 83

Dropped Packets:Dropped Packets:

QCI 80QCI 80

QCI 82QCI 82

5G NSA for SAEGW12


QCI 83QCI 83

Dropped Bytes:Dropped Bytes:

QCI 80QCI 80

QCI 82QCI 82

QCI 83QCI 83

Show sgw-service statistics all verbose



Setup:Active:

QCI 80QCI 80

QCI 82QCI 82

QCI 83QCI 83

Modified:Released:

QCI 80QCI 80

QCI 82QCI 82

QCI 83QCI 83

Dedicated Bearers Released By Reason:

PGW Ini:

QCI 80

QCI 82

QCI 83

S5 Error Ind:S1 Error Ind:

QCI 80QCI 80

QCI 82QCI 82

QCI 83QCI 83

S12 Error Ind:S4 Error Ind:

QCI 80QCI 80

QCI 82QCI 82

QCI 83QCI 83

5G NSA for SAEGW13


PDN Down:Local:

QCI 80QCI 80

QCI 82QCI 82

QCI 83QCI 83

Path Failure S5-U:Path Failure S1-U:

QCI 80QCI 80

QCI 82QCI 82

QCI 83QCI 83

Path Failure S11:Path Failure S5:

QCI 80QCI 80

QCI 82QCI 82

QCI 83QCI 83

Path Failure S12:Path Failure S4-U:

QCI 80QCI 80

QCI 82QCI 82

QCI 83QCI 83

Other:Inactivity Timeout:

QCI 80QCI 80

QCI 82QCI 82

QCI 83QCI 83

Data Statistics Per Interface:

S1-U/S11-U/S4-U/S12/S5-U/S8-U Total Data Statistics:

DownlinkUplink

PacketsPackets:

QCI 80QCI 80

QCI 82QCI 82

QCI 83QCI 83

BytesBytes

QCI 80QCI 80

5G NSA for SAEGW14


QCI 82QCI 82

QCI 83QCI 83


QCI 80QCI 80

QCI 82QCI 82

QCI 83QCI 83


QCI 80QCI 80

QCI 82QCI 82

QCI 83QCI 83

show saegw-service statistiscs all verbose


Setup:Active:

QCI 80QCI 80

QCI 82QCI 82

QCI 83QCI 83

Released:

QCI 80

Data Statistics Per PDN-Type:

Downlink:Uplink:

QCI 80QCI 80

QCI 82QCI 82

QCI 83QCI 83

Bytes:Bytes:

QCI 80QCI 80

QCI 82QCI 82

QCI 83QCI 83


QCI 80QCI 80

5G NSA for SAEGW15


QCI 82QCI 82

QCI 83QCI 83


QCI 80QCI 80

QCI 82QCI 82

QCI 83QCI 83

Bulk StatisticsThe following statistics are added to System Schema in support of the 5G NSA feature.

DescriptionBulk Statistics

The current number of a bearer sessions with aduration of 5 seconds and having a QCI (QoS ClassIndex) of 70.

sess-bearerdur-5sec-qci80





The current number of a bearer sessions with aduration of 10 seconds and having a QCI of 80.












The current number of a bearer sessions with aduration of 1 minute and having a QCI of 80.

sess-bearerdur-1min-qci80



5G NSA for SAEGW16

5G NSA for SAEGWBulk Statistics




The current number of a bearer sessions with aduration of 2 minutes and having a QCI of 80.
























The current number of a bearer sessions with aduration of 1 hour and having a QCI of 80.

sess-bearerdur-1hr-qci80





The current number of a bearer sessions with aduration of 4 hours and having a QCI of 80.




5G NSA for SAEGW17

















The current number of a bearer sessions with aduration of over 24 hours and having a QCI of 80.

sess-bearerdur-over24hr-qci80





The current number of a bearer sessions with aduration of 2 days and having a QCI of 80.

sess-bearerdur-2day-qci80















5G NSA for SAEGW18





The following statistics are added to APN Schema in support of the 5G NSA feature.


The total number of QCI80 active bearers.qci80-actbear



The total number of QCI80 bearers setup.qci80-setupbear



The total number of QCI80 released bearers.qci80-relbear



The total number of QCI80 uplink packets forwarded.qci80-uplinkpkt-fwd



The total number of QCI80 downlink packetsforwarded.

qci80-dwlinkpkt-fwd


qci82-dwlinkpkt-fwd


qci83-dwlinkpkt-fwd

The total number of QCI80 uplink bytes forwarded.qci80-uplinkbyte-fwd



The total number of QCI80 downlink bytes forwarded.qci80-dwlinkbyte-fwd



The total number of QCI80 uplink packets dropped.qci80-uplinkpkt-drop

5G NSA for SAEGW19





The total number of QCI80 downlink packets dropped.qci80-dwlinkpkt-drop



The total number of QCI80 uplink bytes dropped.qci80-uplinkbyte-drop



The total number of QCI80 downlink bytes dropped.qci80-dwlinkbyte-drop



The total number of QCI80 uplink packets droppeddue to MBR being exceeded.

qci80-uplinkpkt-drop-mbrexcd





The total number of QCI80 downlink packets droppeddue to MBR being exceeded.

qci80-dwlinkpkt-drop-mbrexcd





The total number of QCI80 uplink bytes dropped dueto MBR being exceeded.

qci80-uplinkbyte-drop-mbrexcd






qci80-dwlinkbyte-drop-mbrexcd



5G NSA for SAEGW20





The total number of QCI80 rejected bearers.qci80-rejbearer



Dedicated bearers released due to admin clear fromP-GW for qci80.

sessstat-bearrel-ded-admin-clear-qci80





5G NSA for SAEGW21


5G NSA for SAEGW22


5g nsa for saegw - cisco...standalone(nsa). configure contextcontext_name pgw-serviceservice_name...

Documents