5.design and implementation of a
DESCRIPTION
designTRANSCRIPT
DESIGN AND IMPLEMENTATION OF A MULTI-CORE EMBEDDED WSN USED FOR
INDUSTRIAL APPLICATIONS
AIM:
The main aim the project is to design and implementation of a complete WSN platform that
can be used for a range of long-term environmental monitoring IoT applications.
EXISTING METHOD:
In olden days, the Internet of Things (IoT) paradigm was coined in which computers were
able to access data about objects and environment without human interaction. It was
aimed to complement human-entered data that was seen as a limiting factor to acquisition
accuracy, pervasiveness and cost. So it is a main disadvantage of an existing method.
PROPOSED METHOD:
We can overcome the disadvantage of the existing method by Two technologies were
traditionally considered key enablers for the IoT paradigm: While the former is well
established for low-cost identification and tracking WSNs bring IoT applications richer
capabilities for both sensing and actuation. The application requirements for low cost, high
number of sensors, fast deployment, long lifetime, low maintenance, and high quality of
service are considered in the specification and design of the platform and of all its
components. In fact, WSN solutions already cover a very broad range of applications, and
research and technology advances continuously expand their application field. This trend
also increases their use in IoT applications for versatile low-cost data acquisition and
actuation. In this project we have two sections. In section1 we have sensors and Zigbee. In
this we are getting the status of the sensors and transmitted to the section 2 using Zigbee
wireless communication. Section2 will receive the information and upload it into internet
server using GPRS. The system uses a compact circuitry built around LPC2148 (ARM7)
Head office: 2nd floor, Solitaire plaza, beside Image Hospital, Ameerpet, Hyderabad
Website: www.kresttechnology.com, E-Mail: [email protected]
Ph: 9885112363/040 44433434, Branch office: Dilshukhnagar, Ph: 9000404181.
microcontroller Programs are developed in Embedded C. Flash magic is used for loading
programs into Microcontroller.
NODE SECTION:
SOFTWARE TOOLS : Embedded C, Keil IDE, Flash magic
TARGET DEVICE : LPC2148 Board
APPLICATIONS : Industrial areas, Coal mines environments
ADVANTAGES : Reduction in manual power, Time saving, low cost, long distance
networks.
Head office: 2nd floor, Solitaire plaza, beside Image Hospital, Ameerpet, Hyderabad
Website: www.kresttechnology.com, E-Mail: [email protected]
Ph: 9885112363/040 44433434, Branch office: Dilshukhnagar, Ph: 9000404181.
MICRO
CONTROLLER
POWER
SUPPLY
LCD DISPLAY
GPRSSENSORS
GPS