Doc. No.: 50067880-1.0

General Arrangement Legend

Plant : Nyumba Ya Akiba-Cement Plant 3000 TPD

Department : 191 Substation for Limestone Crushing

Contract : 1345327 Approved date : 18.08.2014 Created by : KVR-IN Approved by : APS-IN

General Arrangement Legend

Doc. No. 50067880-1.0

Plant: Nyumba Ya Akiba-Cement Plant 3000 TPD

Department: 191 Substation for Limestone Crushing

The information transmitted by this document is the proprietary and confidential property of FLSmidth 2/5and may not be duplicated, disclosed or utilized without written consent from FLSmidth.

The following documentation is prepared for each plant department:

1. General Arrangement Drawings. 2. Outline and load drawings. 3. General arrangement legend.

1. The purposes of the General arrangement drawings are to :

• Show the general equipment arrangement. • Provide the civil designer with equipment loads for structural design. • Provide erection information.

2. Outline and load drawings are detailed drawings of the equipment

3. A legend is a text accompanying General Arrangement Drawings.

Page 3 is a key to symbols, used on the General Arrangement Drawings.

Page 4 contains the document numbers of the General Arrangement Drawings. The next pages in the legend specify: Ref. No.: Reference numbers which refer to General Arrangement Drawings. Document No.: Document number. Doc vers.: Version number of document. Description: Designation of equipment. Supply Key: SSS = Seller supply on Seller Specification or documentation. SLM = Seller supply using local manufacturing. CSD = Contractor supply on Seller Documentation. (Contractor manufacturing). CSS = Contractor supply on Seller Basic Specification. (Contractor Engineering). CCS = Contractor supply on Contractor Specification. BSD = Buyer supply on Seller Documentation (Buyer manufacturing). BSS = Buyer supply on Seller Basic Specification (Buyer engineering). BBS = Buyer supply on Buyer Specification. Customer equipment No.: Equipment numbers referring to the contract and the Flow

Diagram. Equipment No.: Equipment numbers referring to the contract and the Flow Diagram.

Drawings must be read in conjunction with instruction manual No. 749500 “Structural design and erection, General requirements”, covering: Installation dimensions, access conditions, loads, etc. NOTE: In order to comply with world wide recognized designations, FLSmidth has introduced new designations for their plant documentation. As both old and new designations may appear at the same time, below is a key for translation. Old designation New designation Foundation and Erection drawing. (F&E) General Arrangement Drawing. (GA) Standard F&E drawing. (Std. F&E) Outline and Load Drawing. (OL) Separate F&E drawing. (Sep. F&E) Outline and Load Drawing. (OL)

General Arrangement Legend

Doc. No. 50067880-1.0

Plant: Nyumba Ya Akiba-Cement Plant 3000 TPD

Department: 191 Substation for Limestone Crushing

The information transmitted by this document is the proprietary and confidential property of FLSmidth 3/5and may not be duplicated, disclosed or utilized without written consent from FLSmidth.

Key to symbols

True North Datum point/centre of gravity

Center Line Flow Direction

ISO 7519 ISO 129

ISO 128-24

ISO 81714-1

Earth Grating Embossed plate Concrete

Hole Recess

ISO 7519 ISO 7519 ISO 7519 ISO 7519

Grouting-up Railing Revision Estimated Hold

Stairs (arrow means upwards)

Ramp (arrow means upwards)

Insulation Interrupted line

ISO 7519 ISO 7519

ISO 128-23

For equipment with reference Nos. with , the loads are only specified on outline and load drawings.

For equipment with reference Nos. and consecutive Nos. , see OL drawing or erection documentation.

Levels Vertical Slope

Concrete Structure Steel Structure Secondary Platform

ISO 129-1

ISO 129-1

ISO 129-1 ISO 129

Levels Horizontal Direction and % of slope

(arrow means descent)

Concrete Structure Steel Structure Secondary Platform

ISO 129-1 ISO 129-1 ISO 129-1

ISO 7519

NOTE (Levels): Levels are either top of concrete or top of steel structure, without grating or embossed plate. Levels marked “*” indicate the elevation to the top of the grating or embossed plate.

General Arrangement Legend

Doc. No. 50067880-1.0

Plant: Nyumba Ya Akiba-Cement Plant 3000 TPD

Department: 191 Substation for Limestone Crushing

The information transmitted by this document is the proprietary and confidential property of FLSmidth 4/5and may not be duplicated, disclosed or utilized without written consent from FLSmidth.

Document No. Doc.

Vers. Description

10360777 1.0 Plan No.1

10360779 1.0 Plan No.2

10361292 1.0 Standard Transformer Cell.

749500 Structural design and erection

General Arrangement Legend

Doc. No. 50067880-1.0

Plant: Nyumba Ya Akiba-Cement Plant 3000 TPD

Department: 191 Substation for Limestone Crushing

The information transmitted by this document is the proprietary and confidential property of FLSmidth 5/5and may not be duplicated, disclosed or utilized without written consent from FLSmidth.

Ref. No.

Document No.

Doc. Vers.

Description Supply Key Customer Ref. No.

Equipment No.