3ru aos03 catv optical transmission platform

Product Datasheet AOS03III Series

Copyright©2011 Guangdong Donyan Network Technologies Co., Ltd.

AOS03III optical transmission platform chassis

Introduction

AOS03III platform chassis is standard 19-inch rack-mounting

with 3U high. The chassis provides 13 module slots for two power

supply modules, one control and network management module

and ten application modules. A variety of application modules are

available for flexible configuration. The modular design supports

modules plug-and-play and blind-plug. Application modules can

be installed to any universal slots (10) and automatically

identified by a control module.

The chassis adopts passive rear panel design, blindmate RF connector, which avoids cumbersome maintenance

procedures of power-off, disconnecting and reconnecting cables and other operations. The chassis supports

single power supply module and dual power supply for hot back-up. Unique low-consumption technology helps

achieve a total consumption of no more than 360W of a full loaded chassis. Moreover, the forced

convection cooling system features monitoring status of each fan. It eases replacement work and

ensures long-time stable operation.

Each module can be monitored by a control module or a network management module with a large TFT

LCD display or on a remote monitor through standard SNMP network management system. CAN technology

supports stacking of multiple chassis, as a SNMP network management agent. The Operator can use a network

management module to manage all chassis. This helps save IP address resources and the network management

investment. Operating parameters of each module are backed up in the control module. The operator can reset

them or restore them to replacement applications modules, which is very convenient for platform configuration.

All modules support software online upgrades. Operations can be done on local control panel as well as

our SNMP-compliant network management software-SysManager.

Features

u 3U rack-mounting chassis with 2 slots for power supply modules, 1 slot for network management

control module and 10 universal slots for application modules.

u Passive structure, solid and safe.

u Hot-swapping and blindmate plug-in modules for easy configuration.

u Low consumption design and forced cooling system reduce heating and increase reliability.

u Single power supply or dual power supply for hot back-up.

u Intelligent module and system design monitoring working parameters of all modules.



u Big TFT screen with user-friendly interface.

u Optional SNMP compliable network management system.

u Multi-chassis stacking as a network management agent; and each module supports remote online

upgrade.

u Parameters of each application module can be stored, reset and copied.

AOS03III modules

u AOS03III-C Control Module

u AOS03III-CM Network Management Control Module

u AOS03III-PSAC/PSDC Power Supply Module

u AOT03-31 Series Optical Transmitter Module

u AOR03-31/32 Optical Receiver Module

u AOR03R-31 Reverse Optical Receiver Module

u AOT03R-31 Reverse Optical Transmitter Module

u AOT1550-02-31/32 EDFA Module

u AOT155D-31 1550nm Direct Modulation Optical Transmitter Module

u ARSW01-31 RF Switch Module

u AOSW01-31 Optical Switch Module

u APA01-31 RF Pre-amplifier Module

Specifications

General RF Connector F type Dimension 483mm(W)X133mm(H)X436.5mm(D) Weight 5.8Kg Installation Standard 19” 3U rack-mounting Status Display TFT LCD Status Monitoring Local or remote SNMP Operating Temperature -20℃~+50℃ （-4°~+122°F） Storage Temperature -40℃~+85℃ （-40°~+186°F） Relative Humidity 15~95% non-condensing

Modules Supported 2 power supply modules, 1 network management control module and 10 application modules

CAN RJ11, support stacking DC Power supply Optional 24VDC



AOS03III-C Control module /AOS03III-CM network management control module

Introduction

AOS03III-C is only for local control, installed in one of the horizontal

slots of AOS03III chassis. With a SNMP network management module

inside, AOS03III-C upgrades to AOS03III-CM network management

control module. An AOS03III platform has at least one AOS03III-C

control module, while SNMP module can be added when it is needed.

AOS03III-C/CM module has in front a large full-color TFT LCD display

screen, operations buttons, the power status indicator and a RS232

port, and on the back an RJ45 port for SNMP networks management

and a CAN connection port.

The control module is not only a human-machine interface (HMI), but also a gateway for all application modules.

After configuration, the operating parameters are stored in the application modules and backup in the control

module as well. AOS03III-CM module can collects data from local HMI or remote SNMP management server and

forward it to the application modules, extract data for each modules to display on the local LCD screen, or

forward it to a remote SNMP management server. Several AOS03III-C control modules connected by CAN wire

can be stacked and connect to a AOS03III-CM as a SNMP network management agent. The management control

module features classic button layout, innovative large screen full color TFT LCD display, fashionable menu

(English and Chinese) and user-friendly operation. It has a backup of parameters of all modules, which help

restore the configuration parameters or configure new replacement modules easily. Operators can complete

software upgrade of the machine and application modules locally (from the RS232 port) or remotely.

Features

u Hot swapping for plug-and-play.

u Agency mode. After configuration, application modules operate normally even if there is no network

management control module.

u Stacking. Using CAN technology, multiple chassis (control modules) can be stacked and managed by

one network management module to save the IP address resources and lower the equipment

investment.

u Color TFT screen with friendly human-machine interface, easy to operate.

u Online software upgrade.

u Copy, backup, restore parameters, convenient for the system configuration.

u Standard SNMP with standard RFC and US standard MIB.

u Multilingual interface. User can select a language in menu.



Specifications

Technical Data Interface RS232 Data Format 8,1,0,115200 IP Interface RJ45 Data Rate 10/100M adaptive Display Screen 2.2”（176×220）TFT LCD Status Indicator 2 two-color LEDs for power supply modules Communication Protocol Standard SNMP SNMP Data Format RFC, US MIB Alarm Buzzer, Icon flash and Icon change Stacking CAN General Dimension 99mm(H)X33mm(W)X276.5mm(D) Weight 0.88Kg (without network management module) Power Consumption 5W Installation Plug-in for AOS03III chassis Operating Temperature -25℃~+50℃ （-7°F~+122°F） Storage Temperature -40℃~+85℃ （-40°F~+186°F） RH 15~95%（non-condensing）



AOS03III-PSAC/PSDC power supply module

Introduction

Power supply modules are installed in two special vertical slots of the

chassis. The module front panel has one cooling fan, one power switch

and one buckle. The back panel has a power socket, auto-locking device,

fuse bases (one spare base). The module has delicate protection circuits,

including overload protection, over-voltage protection, short circuit

protection, overheating protection, time delay activation. Single or dual

(backup) power supply can be monitored on display of local control

module or remotely by standard SNMP network management software.

Features

u Small size with high efficiency.

u Delicate protections, including short circuit protection, overload protection, over-voltage protection,

and overheating protection.

u Independent cooling fan.

u Dual independent power supply for hot backup between modules, no peripheral circuit needed.

u Real hot-swapping for plug and play.

Specifications

Technical Input Voltage 150~265VAC (AOS03III-PSAC) or -48VDC (AOS03III-PSDC) Output Voltage Stability 0.5% Load Stability ≤2% PARD and Noise (Resistive Load Voltage) Vpp≤0.5% output voltage

Protection

a. overload 130% b. over-voltage 130% c. short-circuit output near 0V(recover after troubleshooting) d. overheating e. startup-delayer 500ms≤T≤2s startup

Insulation Strength Input-Ground/Input-Output: AC1.5KV 5mA; Output-Ground: AC0.5KV 5mA, insulation resistance>50MΩ

MTTF ≥10,000 hours Power-factor ≥0.9 （load≥30%） Operating Voltage +18Vdc Operating Current Min. 0.4A Operating Current Max. 20A



General Dimension 44.6mm(H)X88.6mm(W)X386.8mm(D) Weight 1.75Kg Power Consumption 360W Installation Plug-in for AOS03III chassis Status Indicator Two-color LED (green/red)

Monitoring Locally on screen or remotely by SNMP system via AOS03III-CM network management control module

Storage Temperature -40℃~+85℃ (-40°~+186°F) RH 15～95% (non-condensing)



AOT03-31 series optical transmitter module

Introduction

AOT03-31 optical transmitter module takes up one AOS03III slot. One chassis can have

high installation density of 10 transmitter modules. The module front panel has a status

indicator, a RF test port (TP) and an optical output port. The back panel has blind-mate

RF connectors and a power/signal connector. It is easy to install and maintain.

Taking advantages of brand GaAs module and low power consumption design, the heat

value reduces to a very low level, which greatly improves the product stability. Input

level controlled by AGC can automatically achieve the best performance, while manual

adjustment is an option (MGC) to meet user specific requirements. Independent

narrowcast input port is available to mix RF signals for optical transmission.

Exclusive pre-distortion correction technique minimizes the nonlinear distortion. Excellent laser precise control

program includes heating and refrigerating control, electric on-off sequence control, hot-swapping control,

power-off control, ensures the laser diode a long life-span with stability.

The total intelligent design automatically regulates these functions. The module can be monitored and

controlled by a local control module or remote SNMP management software to meet user’s needs.

Features

u 870/1000MHz platform.

u AGC/MGC with digital control attenuator integrated.

u Patent pre-distortion correction technique.

u Intelligent design with parameters back up, restore and reset, and software online upgrade.

u Low power consumption, low heating value, high stability and environmental friendliness.

u Plug and play, blind-mate RF connector.

Specification

Optical Wavelength 1310±20nm Reflection Loss ≥45dB Connector SC/APC or FC/APC

Output Power

4dBm(≥2.5mw) 6dBm(≥4mw) 8dBm(≥6mw) 9dBm(≥8mw) 10dBm(≥10mw) 11dBm(≥13mw) 12dBm(≥16mw) 13dBm(≥20mw) 14dBm(≥25mw) 15dBm(≥30mw)



RF Bandwidth 45~870/1000MHz Input level

Broadcast: 75dBuV/ch (59 PAL channels+300MHz digital signal) Narrowcast: 85dBuV

AGC ±5dB Reflection Loss ≥16dB(47~550MHz), 14dB(550~862/1000MHz) Flatness ±0.75 dB TP Level -20dB(Laser input)

RF Connector TP port (B.S.) on front panel Input port (B.S.) on back panel

Link Performance

CSO≥64dB Min. 10KM fiber loss, optical attenuator, optical receiver input @-1dBm and 59 channels PAL-D TV signals.

CTB≥68dB XM≥65dB C/N≥52dB

General Dimension 130mm(H)X30.5mm(W)x431.8mm(D) Weight 1.2Kg Power Consumption ≤14W Status Indicator Two-color LED (green/red)


Operating Temperature -20℃~+50℃ (-4°~+122°F) Storage Temperature -40℃~+85℃ (-40°~+186°F) RH 15～95% (non-condensing)

Ordering information

Model Basic Information

AOT03-31 - Output optical

power(dBm) - Working bandwidth

Optical connector

RF connector - RF input

Nos. TP Nos. Amplifier module Nos.

- XX - 8: 870MHz 1: 1GMHz

S:SC/APC F:FC/APC

M: Metric I: Imperial - 1: Single

2: Dual 1: Single 2: Dual

1: Single 2: Dual



AOR03-31/32 optical receiver module

Introduction

AOR03-31/32 optical receiver module take ups one AOS03III chassis slot. It supports

dual-path backup automatically. A chassis can install ten receiver modules, up to 20

optical inputs and 10 paths RF outputs. The front panel has a status indicator, a RF test

port, optical input ports, and back panel has a blind-mate RF connector and a

power/signal connector. The installation and maintenance is very easy. Taking

advantages of brand GaAs module and low power consumption design, the heat value

stays at a very low level, which greatly improves the product stability.

This module has two independent RF paths with two independent optical AGCs and electronic AGCs, and ASC RF

output control, which ensures stable output level. Two independent paths of optical control and electronic

control RF switching circuits are hot backup, either optical input signal or electrical input signal is faulty, the

machine can switch to the other path. This ensures uninterrupted signal transport, and the switching threshold

can be set by users. Output level and equalizer can be adjusted for easy level distribution and cable transmission.


controlled by a local control module or a remote SNMP management software to meet user’s needs. This high

performance receiver module is particularly suited to head-end use and self-healing network.

Features

u 45~870/1000MHz platform.

u Dual independent optical path with independent optical AGC, electrical AGC, ASC and MGC ensuring

stable output.

u Independent path of optical control and electronic control RF switching circuits are hot backup, and the

switching threshold can be set by users, which ensures uninterrupted signal transport,

u Intelligent design with parameters back up, restore and reset, and software online upgrade.


u Plug and play with blind-mate RF connector.

Specifications

Optical Wavelength 1290~1600nm Reflection Loss 45dB (Min.) Connector SC/APC Input Power -6~+2dBm



RF Frequency Bandwidth 45～870/1000MHz Output Level 96dBuV@-6~+2dBm optical input AGC ±5dB Slope Control 0-3dB Reflection Loss ≥16dB(47~550MHz), 14dB(550~862/1000MHz) Flatness ±0.75dB Output Impendence 75Ω TP Level -20dB

Connector TP port (B.S.) on front panel Input port (B.S.) on back panel

Link Performance

CSO≥64dB Min. 10KM fiber loss, optical attenuator, optical receiver input @-1dBm and 59 channels PAL-D TV signals.

CTB≥68dB XM≥65dB C/N≥52dB

General Dimension 130mm(H)X30.5mm(W)X431.8mm(D) Weight 1.19Kg Power Consumption ≤16W Status Indicator Two-color LED (green/red)





AOR03-31 (Single input) AOR03-32 (Dual input)

- Frequency bandwidth

Fiber connector

RF connector - Optical receiving

component

- 8: 870MHz 1: 1G

S: SC/APC F: FC/APC

M: Metric I: Imperial -

P: PIN diode O: Photoelectrical integrated module



AOR03R-31 reverse optical receiver module

Introduction

AOR03R-31 reverse optical receiver module take ups one AOS30III slot. It supports

four-path independent reverse optical inputs. A chassis can install 10 receiver modules,

up to 40 optical inputs and 40 RF outputs. The front panel has a status indicator, a RF

test port, optical input ports, and back panel has blind-mate RF connectors and a

power/signal connector. The installation and maintenance is very easy. Taking

advantages of brand GaAs module and low power consumption design, the heating

reduces to a very low level, which greatly improves the product stability.

The RF channel has independent optical AGC and output level adjustment function, which ensure stable output

level. It features wide dynamic optical receiving range, high output level, low noise and high nonlinear ratios to

meet various kinds of applications. It automatically shut off RF output when optical input is not available. This

greatly suppresses the gathering noise for easy online hot backup. Each RF channel can be manually switched

on/off by software locally or remotely, which is convenient for troubleshooting. Users can choose the test port

by software as well.



Features

u High density. One 3U chassis can install 10 optical receiver modules, up to 40 optical inputs and 40 RF

outputs.

u Four independent channels with independent optical AGC and manual MGC to ensure stable level

output.

u Wide dynamic optical receiving range, high output level, low noise and high nonlinear ratios.

u Intelligent design, low power consumption, low heating value, high stability and environmental

friendliness.

u Plug and play with blind-mate RF connectors and a power/signal connector.

u Complete functions, high reliability.



Specifications

Optical Wavelength 1290~1600nm Reflection Loss 45dB (Min.) Connector SC/APC Input Power -20~0dBm RF Frequency Bandwidth 5~200MHz Output Level 90dBuV@-20~0dBm optical input Optical AGC -20~+0dB optical input Reflection Loss ≥16dB Flatness ±0.75dB Output Impendence 75Ω TP Level -20dB

Connector TP port (B.S.) on front panel Input port (B.S.) on back panel

Link Performance NPR≥30dB, NPR dynamic range≥20dB General Dimension 130mm(H)X30.5mm(W)X431.8mm(D) Weight 1.3Kg Power Consumption ≤14W Status Indicator Two-color LED (green/red)


Operating Temperature -20℃~+50℃ (-4°~+122°F) Storage Temperature -40℃~+85℃ (-40°~+186°F) RH 15～95% (Non-condensing)



AOR03R-31

- Working bandwidth

Optical connector

RF connector - RF output Nos.

- 6: 65MHz 2: 200MHz

S: SC/APC F: FC/APC

M: Metric I: Imperial -

1: 4-in-1 2: 2 independent

3: 2X2-in-1 4: 4 independent

5: 2-in-1 auto-switching



AOT03R-31 reverse optical transmitter module

Introduction

AOT03R-31 reverse optical transmitter module features low noise and adjustable gain

control, simple structure, low power consumption, APC control and high reliability. It is

applicable for 1310nm or 1550nm reverse fiber optical transmission system. The built-in

microprocessor achieves real-time monitoring of the laser working status and output

power. When reverse optical transmitter module operates in abnormal status, it will be

reported by the status LED or through the data bus with corresponding alarm

information. If a serious alarm occurs, the microprocessor will automatically turn off the

laser. Users can monitor the transmitter and run fault diagnosis by a network

management control module.

Features

u High density. One 3U frame can hold ten reverse optical transmitter modules.

u APC for stable level output.

u Low noise and adjustable gain control, simple structure, low power consumption, complete functions

and high reliability.

u Intelligent design, two-color status indicator, configuration parameters set locally/remotely,

configuration parameters can back up, restore, and reset, software online upgrade.


u Plug and play with blind-mate RF connector and power/signal connector.

Specification

Optical Wavelength 1310±20nm; 1550±20nm

Output Power

-3dBm(≥0.5mw) 0dBm(≥1mw) 3dBm(≥2mw) 6dBm(≥4mw)

Reflection Loss ≥45dB Output Power stability ≥±0.5dB@25℃ Connector SC/APC RF Working Bandwidth 5~200MHz Impendence 75Ω Flatness ±0.5dB Reflection Loss ≥16dB Input Level 75±5dBuv TP level 75±1dBuv RF Connector Imperial Link Performance NPR≥30dB, NPR dynamic range ≥20dB



General Dimension 130mm(H)×30.5mm(W)×431.8mm(D) Weight 1.1Kg Power Consumption ≤4W Status Indicator Two-color LED (green/red)





AOT03R-31

- Output Optical Power - Working

bandwidth Optical

connector RF

connector - Laser Laser configuration

- L: 0.5~1mw M: 1~2mw H: >2mw

- 6: 65MHz 2: 200MHz

S: SC/APC F: FC/APC

M: Metric I: Imperial - F: FP

D: DFB I: With isolation P: No isolation



AOT1550-02-31/32 Erbium-doped fiber amplifier module

Introduction

Erbium-doped fiber amplifier module features low noise and high gain, simple structure,

and high reliability. It is applicable for 1550nm fiber optical transmission system. The

built-in microprocessor achieves real-time monitoring of pump laser working status and

input/output power. When the amplifier module operates in abnormal status, it will be

reported by the status LED or through the data bus output corresponding alarm

information. If a serious alarm occurs, the microprocessor automatically turns off the

lasers to protect the module. Users can monitor the amplifier module and run fault

diagnosis by a network management control module.

Features

u High density. One 3U frame can hold ten optical fiber amplifier modules.

u ATC and APC for stable level output.

u Low noise and adjustable gain control.

u Intelligent design, two-color status indicator, configuration parameters set locally/remotely,

configuration parameters can back up, restore, and reset, software online upgrade.


u Complete functions and high reliability

Specifications

Technical Wavelength 1550±nm Input Power -3~+10dBm Output Power 13~24dBm Noise ≤5.0dB(@Pin=0dBm) Input Impendence ≥30dB Output Impendence ≥30dB Output Pump Leakage Power ≤-30dBm Input Return Loss ≥60dB Output Return Loss ≥60dB Polarization Dependent Gain ≤0.5dB General Dimension 130mm(H)×30.5mm(W)×431.8mm(D) Weight 1.3Kg Power Consumption ≤16W Status Indicator Two-color LED (green/red)


Operation Temperature -20℃~+50℃ (-4°~+122°F) Storage Temperature -40℃~+85℃ (-40°~+186°F) RH 15～95% (non-condensing)





AOT1550-02-31 (single pump) AOT1550-02-32 (dual pump)

- Nos. of output - Output optical power - Fiber connector

- 1, 2, 3, 4 - XX - S: SC/APC F: FC/APC



AOT155D-31 direct-modulation optical transmitter module

Introduction

AOT155D-31 direct-modulation optical transmitter module takes up one AOS03III slot.

One chassis can have high installation density of 10 transmitter modules. The module

front panel has a status indicator, a RF test port (TP) and an optical output port. The

back panel has blind-mate RF connectors and a power/signal connector. It is easy to

install and maintain.

Taking advantages of brand GaAs module and low power consumption design, the heat

value reduces to a very low level, which greatly improves the product stability. Input

level controlled by AGC can automatically achieve the best performance, while manual adjustment is an option

(MGC) to meet user specific requirements. Independent narrowcast input port is available to mix RF signals for

optical transmission.

Exclusive pre-distortion correction technique minimizes the nonlinear distortion. Excellent laser precise control

program includes heating and refrigerating control, electric on-off sequence control, hot-swapping control,

power-off control, ensures the laser diode a long life-span with stability.



Features

u 870/1000MHz platform.

u AGC/MGC with digital control attenuator integrated.

u Patent pre-distortion correction technique to achieve excellent non-liner performance.

u Intelligent design with local or remote configuration.


u Plug and play, blind-mate RF connector.

Specifications

Optical Wavelength 1550±5nm or ITU wavelength optional Reflection Loss ≥45dB Connector SC/APC Output Power 6dBm(≥4mw) 8dBm(≥6mw) 9dBm(≥8mw) 10dBm(≥10mw)



RF Bandwidth 45~870/1000MHz Input level

75dBuV/ch (59 PAL channels+300MHz digital signal) Digital input level @ 95dBuV

AGC ±5dB Reflection Loss ≥16dB(47~550MHz), 14dB(550~862/1000MHz) Flatness ±0.75 dB TP Level -20dB(Laser input)

RF Connector TP port (B.S.) on front panel Input port (B.S.) on back panel

Link Performance (59 PAL chs) CSO≥60dB CTB≥65dB C/N≥51dB

General Dimension 130mm(H)X30.5mm(W)x431.8mm(D) Weight 1.2Kg Power Consumption ≤14W Status Indicator Two-color LED (green/red)





AOT155D-31 - Output optical

power (dBm) - Operating bandwidth

Fiber connector

RF connector

- XX - 8: 870MHz 1: 1GMHz

S: SC/APC F: FC/APC

M: Metric I: Imperial



ARSW01-31 RF switch module

Introduction

ARSW01-31 is a 3U RF switch module featuring manual and automatic RF signal

switching (AB dual path), and user-friendly operation. It is applicable for various systems

that require RF signal control, switching and redundancy backup.

Features u High density. One 3U frame can hold ten RF switch modules.

u A/B path RF signals auto switching.

u Intelligent design, two-color status indicator, configuration parameters set locally/remotely, configuration parameters can back up, restore, and reset, software online upgrade.

u Low power consumption, low calorific value, high stability and environmental friendliness.

u Complete functions and high reliability.

Specifications

Technical Bandwidth 5~870/1000 MHz In-band Flatness ±0.5 dB Output Impendence 75Ω Insert Loss ≤1.5 dB Operational Level 75~115dBuV Switching Time ≤10ms Switching mode Manual/Auto Isolation (A/B) ≥45 dB Default Switching Level 70dBuv (60chs analog signal) TP Level -20±1db vs. output port RF port TP port (B.S.) on front panel; Input port (B.S.) on back panel General Dimension 130mm(H)X30.5mm(W)x431.8mm(D) Weight 1.0Kg Power Consumption ≤2W Status Indicator Two-color LED (green/red)


Operating Temperature -20℃~+50℃ (-4°~+122°F) Storage Temperature -40℃~+85℃ (-40°~+186°F) RH 15~95% (non-condensing)



ARSW01-31 - Operating bandwidth RF connector

- 8: 860MHz 1: 1GMHz M: Metric I: Imperial



AOSW01-31 optical switch module

Introduction

AOSW01-31 is a 3U optical switch module featuring automatic optical signal switching

and friendly operation. It is applicable for various systems that require optical signal

control, switching and redundancy backup.

Features

u High density. One 3U frame can hold ten optical switch modules.

u A/B path optical signals auto switching.

u Intelligent design, two-color status indicator, configuration parameters set locally/remotely, configuration parameters can back up, restore, and reset, software online upgrade.

u Low power consumption, low calorific value, high stability and environmental friendliness.

u Complete functions and high reliability.

Specifications

Technical Wavelength 1260~1360nm or 1510~1610nm Insert Loss ≤1.5dB Polarization Dependent Loss ≤0.1dB Return Loss ≥55dB Channel Crosstalk ≥60dB Repeatability ≤±0.02dB Transmission Power ≤500mW Switching Time ≤10mS General Dimension 130mm(H)X30.5mm(W)x431.8mm(D) Weight 1.0Kg Power Consumption ≤2W Status Indicator Two-color LED (green/red)


Operating Temperature -20℃~+50℃ (-4°~+122°F) Storage Temperature -40℃~+85℃ (-40°~+186°F) RH 15~95% (non-condensing)



AOSW01-31 (2X1) AOSW01-32 (2X2)

- Wavelength Fiber connector

- 1: 1310nm 2: 1550nm 3: Dual S:SC/APC F:FC/APC



APA01-31 RF pre-amplifier module

Introduction

APA01-31 is a 3U RF pre-amplifier module. The module is applicable for various systems

that require control, amplification and monitoring of RF signals.

Features

u Operating bandwidth 47~862/1000MHz.

u Gain control ranges 10~20dB by 0.5dB stepping.

u Gain and slope control can be set by stepping locally/remotely.

u Intelligent management ensures best performance of amplifier components at

different input electrical level.

u Parameters displayed on the LCD in the front of chassis.

Specifications

Technical Bandwidth 47 MHz~1000 MHz Rated Max. Gain 20 dB In-band Flatness ±0.75 dB Rated Input Level 80dBuV Max. Input Level ≤90dBuV Rated Output Level 100dBuV Max. Output Level 104dBuV CTB ≥ 70dB @ rated input/output CSO ≥ 66dB @ rated input/output Input/output Return Loss ≥16dB (47~550MHz), 14dB (550~862/1000MHz) Gain Regulating Range 10~20dB Slope Regulating Range 0~4dB TP Level -20±0.5dBmV vs. RF output General Dimension 99mm(H)X33mm(W)×276.5mm(D) Weight 1.1Kg Power Consumption ≤8W Status Indicator Two-color LED (green/red) Operating Temperature -20℃~+50℃ (-4°~+122°F) Storage Temperature -40℃~+85℃ (-40°~+186°F) RH 15~95% (non-condensing)



APA01-31 - Operating bandwidth RF connector

- 8:860MHz 1:1GMHz M: Metric I: Imperial

3ru aos03 catv optical transmission platform

Technology

snmp module

module slots

aos03iiic control modules

aos03iiiccontrol module

aos03iiiccm module

snmp network management

network management moduleand

uintelligent module