document3

3AL 97279 AAAA Ed.01 TQCVA

Technical Handbook

Alcatel 1642 Edge Multiplexer

STM 1 Multi-Service Edge Multiplexer for Customer Premises

1642 Edge Multiplexer Rel.3.0

1

ED 01

3AL 97279 AAAA TQCVA 58/176

2.2 Equipment parts list

In the following tables are listed all the items of the equipment Such tables report the following information: ITEM DESCRIPTION——Name of part ITEM CODE——ASB factory Part Nos. (Such as 411.xxx.xxx x) of item MODULE——Name of the module in item CODE——ASB factory Part number of module QTY——quantity Max QTY——Maximum quantity

Table12. Unit part list

ITEM DESCRIPTION ITEM CODE MODULE CODE MAX

QTY

SLOT NOTE

COMMON PART

SSY-Main Unit 48 3AL97081ACAA BPA-Backplane 3AL97028AAAA 1 --

MA-1642EMUX Mechanical Box 3AL97048AAAA 1

PBA-PBP48 3AL97030ACAA 1 SSY-Main Unit 24 3AL97081ADAA BPA-Backplane 3AL97028AAAA 1 --

MA-1642EMUX Mechanical Box 3AL97048AAAA 1

PBA-PBP24 3AL97030ADAA 1 SSY-MB4-1 3AL97273AAAA PBA-MB4-1 3AL97272AAAA 1 1 1 MA-FRONT PANEL MB4-1 3AL97274AAAA 1

CON-ACCESS*SCREW LOCKS 1AB036130001 4

MPP - 11 X 45 LABEL 3AN49331AAAA 1 SSY-STM1 UNIT S1.1 (CD) 3AL97083CAAA PBA-OT1B1(N)(CD) 3AL97215AAAA 2 2,3,4,5 PBA-OMS11 3AL97213AAAA 2 MA-OT1B1 complete panel 3AL97051AAAA 2 MPP-LABEL 21103879AADA 2 COPPER SUPPORT_10.5 1AD052840001 4 SCREW*PAN-HD*XR-POZ 1AD003150013 8 SSY-STM1 UNIT L1.1 (CD) 3AL97083CBAA PBA-OT1B1(N)(CD) 3AL97215AAAA 2 2,3,4,5 PBA-OML11 3AL97213ABAA 2 MA-OT1B1 complete panel 3AL97051AAAA 2 MPP-LABEL 21103879AADA 2 COPPER SUPPORT_10.5 1AD052840001 4 SCREW*PAN-HD*XR-POZ 1AD003150013 8 SSY-STM1 UNIT L1.2 (CD) 3AL97083CCAA PBA-OT1B1(N)(CD) 3AL97215AAAA 2 2,3,4,5 PBA-OML12 3AL97213ACAA 2 MA-OT1B1 complete panel 3AL97051AAAA 2 MPP-LABEL 21103879AADA 2 COPPER SUPPORT_10.5 1AD052840001 4 SCREW*PAN-HD*XR-POZ 1AD003150013 8

2

ED 01


SSY-STM1 ELEC-TRICAL UNIT (CD) 3AL97083BDAA PBA-OT1B1(N)(CD) 3AL97215AAAA 2 2,3,4,5 PBA-EM1 3AL97213ADAA 2 MA-OT1B1 complete panel 3AL97051AAAA 2 MPP-LABEL 21103879AADA 2 COPPER SUPPORT_10.5 1AD052840001 4 SCREW*PAN-HD*XR-POZ 1AD003150013 8 SSY-E1RCB8 3AL97045AAAA PBA-E1RCB8 3AL97035AAAA 4 2,3,4,5 MA-E1RCB8 complete panel 3AL97050AAAA 4 SSY-E1B28 3AL97078AAAA PBA-E1B28 3AL97060AAAA 4 2,3,4,5 MA-E1B28 Complete panel 3AL97055AAAA 4 SSY-E1B8 3AL97078ABAA PBA-E1B8 3AL97060ABAA 4 2,3,4,5 MA-E1B8 Complete panel 3AL97055ACAA 4 SSY-DE1B28 3AL97079AAAA PBA-DE1B28 3AL97062AAAA 4 2,3,4,5 MA-DE1B28 Complete panel 3AL97055ABAA 4 SSY-DE1B8 3AL97079ABAA PBA-DE1B8 3AL97062ABAA 4 2,3,4,5 MA-DE1B8 Complete panel 3AL97055ADAA 4 SSY-DE1JB8 3AL97079DBAA PBA-DE1JB8 3AL97062DBAA 4 2,3,4,5 MA-DE1JB8 Complete panel 3AL97225AAAA 4 SSY-SE1B28 3AL97078ACAA PBA-SE1B28 3AL97060ACAA 4 2,3,4,5 MA-E1B28 Complete panel 3AL97055AEAA 4 SSY-SE1B8 3AL97078ADAA PBA-SE1B8 3AL97060ADAA 4 2,3,4,5 MA-E1B8 Complete panel 3AL97055AGAA 4 SSY-SDE1B28 3AL97079ACAA PBA-SDE1B28 3AL97062ACAA 4 2,3,4,5 MA-DE1B28 Complete panel 3AL97055AFAA 4 SSY-SDE1B8 3AL97079ADAA PBA-SDE1B8 3AL97062ADAA 4 2,3,4,5 MA-DE1B8 Complete panel 3AL97055AHAA 4 SSY-DE1B32 3AL97198AAAA PBA-DE1B32 3AL97197ABAA 4 2,3,4,5 MA-DE1B32 Complete panel 3AL97204AAAA 4

SSY-E3B1 3AL97086AAAA PBA-E3B1 3AL97085AAAA 4 2,3,4,5

MA-E3B1 complete panel 3AL97120AAAA 4 SSY-DS3B1 3AL97086ABAA PBA-DS3B1 3AL97085ABAA 4 2,3,4,5 MA-DS3B1 complete panel 3AL97120ABAA 4 SSY-ISA-ES1 8FE 3AL97165ABAA PBA-ISA-ES1 8FE 3AL97164ABAA 2 2,3,4,5

MA-ISA-ES1 8FE complete panel 3AL97174AAAA 2

SSY-ISA-ES1 3FE 3AL97194ABAA PBA-ISA-ES1 3FE 3AL97193ABAA 2 2,3,4,5

MA-ISA-ES1 3FE complete panel 3AL97195AAAA 2

SSY-DC48B 3AL97042ABAA PBA-DC48B 3AL97016ABAA 1 6 MA-DC48B complete panel 3AL97054AAAA 1 SSY-AC220B 3AL97077AAAB PBA-AC220B 3AL97058AAAA 1 6 MA-AC220B complete panel 3AL97056AAAA 1 SSY-FB 3AL97043ACAA PBA-FB 3AL97047ACAA 1 7 MA-FB complete panel 3AL97053AAAA 1 SSY-SFB 3AL97043ADAA PBA-SFB 3AL97047ADAA 1 7 MA-SFB complete panel 3AL97053ABAA 1

3

ED 01


2.3 Connection layout

There are seven slots in the 1642EMUX equipment. As indicated in Figure25. , the slot (1) is the main board slot; slots (2)-(5) are service board slots, in which different types of service boards can be inserted; slot (6) is the power supply interface board slot ,slot (7) is the fan board slot and slot(8) is anti-dust board.

67

Figure25. The slot layout of the 1642EMUX equipment rack

Table14. Explanatory notes

Note Description 1 SSY-MB4-1 is the main board without SFP interface module, can work in STM1

(S1.1/L1.1/L1.2), or STM4(S4.1/L4.1/L4.2) optical interface mode, TM or ADM mode by the choice of optional SFP module independently

2 The double shield DC48V power cable for EMC/EMI Class B qualification

4

ED 01


2.4 Units panel view

Figure26. to Figure42. are the panel view and descriptions of all units of 1642EMUX equipment.

2.4.1 AC220B power supply interface board

Acronym Slots AC220B 6

Note: (1) Power supply switch

ON means the power supply switch is in the connected status. OFF means the power supply switch is in the disconnected status.

(2) 220V/230V AC power supply interface, D 3-terminal connector.

Figure26. AC220B board, panel view

(1)

(2)

5

ED 01


2.4.2 DC48B power supply interface board

Acronym Slots DC48B 6

Note: (1) Power supply switch

ON means the power supply switch is in the connected status OFF means the power supply switch is in the disconnected status

(2) –24V/48V DC power supply interface, D 3-terminal connector. (3) The voltage label on the power supply connector terminal “-24V/48V”; (4) The voltage label on the power supply connector terminal “protective grounding”; (5) The voltage label on the power supply connector terminal “GND”;

Figure27. DC48B board, panel view

(1) (3)

(4)

(5)

(2)

6

ED 01


2.4.3 FB/SFB fan board

Acronym Slots FB/SFB 7

FB panel view SFB panel view

Note: (1) –24V/48V DC power supply interface, D 3-terminal connector. (2) The voltage label on the power supply connector terminal “GND”; (3) The voltage label on the power supply connector terminal “protective grounding”; (4) The voltage l label on the power supply connector terminal “-24V/48V”;

Figure28. FB/SFB board, panel view

(1)

(2)

(3)

(4)

7

ED 01


2.4.4 MB4-1 main board

Acronym Slot MB4-1 1

Figure29. MB4-1 board, panel view

(9)

(16)

(1)(2)(3)

(4)

(5)

(6)

(7)(8)

(17)

(18)

(24)

(19)

(23)

(25)

(27)

(10)(11)(12)(13)(14)(15)

(26)

(20)(21)(22)

(1) RUN LED (2) COMMON ALARM (3) SERIAL ALARM (4) Q PORT (5) F PORT (6) Port #1 E2 channel (7) Port #1 F1 channel (8) Port #2 E2 channel (9) Port #2 E2 channel (10) Housekeeping input0 (11) Housekeeping input1 (12) Housekeeping input2 (13) Housekeeping output0 (14) Housekeeping output1 (15) Housekeeping output2 (16) Debug port (17) 2M external clock output (18) 2M external clock input (19) OWM connector (20) OWM LED (21) OT1 alarm LED (22) OT2 alarm LED (23) OT1 output (24) OT1 input (25) Reset button (26) OT2 output (27) OT2 input

8

ED 01


2.4.5 OT1B1(N) 155Mb/s optical interface board

Acronym Slots OT1B1 2,3,4,5

Note: (1) Tricolor LED:

Green LED ON-units in operation Red LED ON-severity alarm Yellow LED ON-common alarm

(2), (3) RJ11 connector: Transparent channel F1 byte, E2 byte. (4), (5) SC/PC optical fiber connector: RX, TX.

Figure30. OT1B1(N) board, panel view

(1) (5)(4)(3)(2)

9

ED 01


2.4.6 ET1B1(N) 155Mb/s electrical interface board

Acronym Slots ET1B1 2,3,4,5

(1) (2) (3) (4) (5)



(2), (3) RJ11 connector: Transparent channel F1 byte, E2 byte. (4), (5) 1.0/2.3 coaxial connector: RX, TX. In order to get better EMC performance, additional shield box for coaxial cable is required,see following.

Figure31. OT1B1(N) board, panel view

10

ED 01


2.4.7 DE1B28/SDE1B28 E1 interface board

Acronym Slots DE1B28 2,3,4,5



(2) 2M service interface. The upper is the transmitting terminal and the lower is the receiving terminal.

Figure32. DE1B28/SDE1B28 board, panel view

(1) (2)

11

ED 01


2.4.8 DE1B8/SDE1B8 E1 interface board



Green LED ON-units in operation Red LED ON-severity alarm Yellow LED-common alarm


Figure33. DE1B8/SDE1B8 board, panel view

(1) (2)

12

ED 01


2.4.9 E1B28/SE1B28 E1 interface board

Acronym Slots E1B28 2,3,4,5



(2) 2M service interface: The upper is the transmitting terminal and the lower is the receiving terminal.

Figure34. E1B28/SE1B28 board, panel view

(1) (2)

13

ED 01


2.4.10 E1B8/SE1B8 E1 interface board




(2) 2M service interface: The upper is the transmitting terminal and the lower is the receiving terminal.

Figure35. E1B8/SE1B8 board, panel view

(1) (2)

14

ED 01


2.4.11 DE1B32 E1 interface board





Figure36. DE1B32 board, panel view

(1) (2)

15

ED 01


2.4.12 E1RCB8 E1 interface board

Acronym Slots E1RCB8 2,3,4,5



(2) 2M service interface. The upper is the transmitting terminal and the lower is the receiving terminal. (3) 2M extended service interface for transmitting ECC signals. TX stands for transmitting terminal and RX

stands for receiving terminal.

Figure37. E1RCB8 board, panel view

(1) (3) (2)

16

ED 01


2.4.13 DS3B1 interface board

Acronym Slots DS3B1 2,3,4,5

Note: (1) Tricolor LED


(2), (3) 75Ω coaxial cable interface: TX, RX.

Figure38. DS3B1 board, panel view

(1) (3)(2)

17

ED 01


2.4.14 E3B1 interface board




(2), (3) 75Ω coaxial cable interface: TX, RX.

Figure39. E3B1 board, panel view

(1) (3)(2)

18

ED 01


2.4.15 ISA-ES1 8FE Ethernet interface board ( 8 port )

Acronym Slots ISA-ES1 8FE 2,3,4,5

Note: (1) Tricolor LED: Green LED ON-units in operation Red LED ON-severity alarm Yellow LED ON-common alarm (2)~(9) RJ45 connector: Ethernet port 1-8. (10) Ethernet interface LINK/ACTIVE status indicating lamp: - ON means LINK status; - Flash means ACTIVE status. (11) Ethernet interface 10M/100M rate indicating lamp: - OFF means 10M rate - ON means 100M rate

Figure40. ISA-ES1 8FE board, panel view

(1) (2) (3) (4) (5) (6) (7) (8) (9)

(10) (11)

19

ED 01


2.4.16 ISA-ES1 3FE Ethernet interface board ( 3 port )

Acronym Slots ISA-ES1 3FE 2,3,4,5

Note: (1) Tricolor LED: Green LED ON-units in operation Red LED ON-severity alarm Yellow LED ON-common alarm (2) SFP optical connector: Ethernet port 1. (3)(4) RJ45 connector: Ethernet port 2~3. (5) Ethernet interface LINK/ACTIVE status indicating lamp: - ON means LINK status; - Flash means ACTIVE status. (6) Ethernet interface 10M/100M rate indicating lamp: - OFF means 10M rate - ON means 100M rate

Figure41. ISA-ES1 3FE board, panel view

(1) (2) (3) (4)

(5) (6)

20

ED 01


2.4.17 DE1JB8 E1 interface board

Acronym Slots DE1JB8 2,3,4,5

Note: (1)Tricolor LED:


(2)2M service interface.

Figure42. DE1JB8 board, panel view

(1) (2)

21

ED 01

3AL 97279 AAAA TQCVA 135/176

Nominal bit rate kbit/s STM-1 155 520 (ITU-T G.707) Application code S-1.1 L-1.1 L-1.2 Operating wavelength Range nm 1261-1360 1263-1360 1480-1580 Transmitter reference point S Source type MLM MLM MLM Spectrum characteristics: - Maximum RMS (σ) spectrum width nm 7.7 3 - - Maximum -20 dB spectrum width nm - - 1 - Minimum side form suppression ratio dB - - 30 Mean launch power - Maximum dBm -8 0 0 - Minimum dBm -15 -5 -5 Minimum extinction ratio dB 8.2 10 10 Optical path between S and R Attenuation range dB 0-12 10-28 10-28 Maximum dispersion ps/nm 96 246 NA Minimum return loss of the optical cable at point S (including any active connector) dB NA NA 20

Maximum discrete reflection coefficient between SR points dB NA NA -25

Receiver at reference point R Minimum sensitivity dBm -28 -34 -34 Minimum overload dBm -8 -10 -10 Maximum optical path penalty dB 1 1 1 Maximum reflection measured at point R dB NA NA -25 Note: NA indicates not available.

Table22. STM-4 optical interface parameters

Unit Value Nominal bit rate kbit/s STM-4 622080 (ITU-T G.707) Application code S-4.1 L-4.1 L-4.2 Operating wavelength Range nm 1293-1334 1300-1325 1480-1580 Transmitter reference point S Source type MLM MLM SLM Spectrum characteristics: - Maximum RMS (σ) spectrum width nm 4 2 -- - Maximum -20 dB spectrum width nm - - <1 - Minimum side form suppression ratio dB - - 30 Mean launch power - Maximum dBm -8 2 2 - Minimum dBm -15 -3 -3 Minimum extinction ratio dB 8.2 10 10 Optical path between S and R Attenuation range dB 0-12 10-24 10-24 Maximum dispersion ps/nm 46 92 . Minimum return loss of the optical cable at point S (including any active connector) dB NA 20 24

Maximum discrete reflection coefficient between SR points dB NA -25 -27

Receiver at reference point R Minimum sensitivity dBm -28 -28 -28 Minimum overload dBm -8 -8 -8 Maximum optical path penalty dB 1 1 1 Maximum reflection measured at point R dB NA -14 -27 Note: NA indicates not available.

22

document3

Documents

power supply

2m service

operation

stm1 unit

means 100m

means 10m

label copper

means link