All dimensions are in mm unless otherwise stated. Print Date : 21/12/2010

Do not scale.

SHEET 1 OF 1

Slew Lock 3 Positions7 4 26

Slew Detail

16 20

14 15 13 21

2

18

36

37

24 25

12

5

29

600 P.C.D.

32 23

12

5

22

370

2670

DETAIL A SCALE 1 : 528 27 30

5

Rubber Buffer to avoid Jib Arm contact with Post

2

2363 650

3 44 45 43 1

33 34 35 31

6

46 6 off Spark Resistant Design 220 Model Post Swing Jib Crane S.W.L. 2 Tonne Jib Arm Section- UB 178x102x19kg/M Duty : A3 to BS7333:1990 & EM Directive 89/392/EECC Concrete Strength - 30N/mm2 Max Ground Pressure - 40.4N/m2 Crane OT Moment - 54.85 kNm Crane Axial Load - 24.84 kN 12off per Jib - HD Foundation Bolts M24x450 Bolt Tightening Torque - 320Nm Concrete Surface Finish - Trowelled Slew Lock 1 - 125 ( AntiClockwise ) Slew Lock 2 - 0 Slew Lock 3 - 125 ( Clockwise ) Post Colour : Yellow Jib Arm Colour : Yellow

3617

39 40 41 42

24 23 22 21 20 19 18

1 1 1 1 1 1 1 1 1 1 1 2 1 1 1 1 1 1 1 1 12 1 1QTY.

6 6 6 6 6 6 6 6 6 6 6 12 6 6 6 6 6 6 6 6 72 6 6 Batch

Jib Tie UB Jib Back Post Lock Pin Tube Lock Mounting Plate Push Pull Toggle Clamp Assembly Lock Pin Spring Pin Internal Circlip 42 mm Lock Pin Tube End Cap Compression Spring ( Belleville ) Shell Clamp 511-3 Black Strainer Wire for Lock Disc Hex Nut M6 Wire Strainer Lock Actuator Mounting Plate Top Post Cap Bottom Plate Boss Bottom Plate Top Plate Base Plate Gusset Post Tube Base PlateDescription

Default Default Default Default Default Default Default 5 x 35 BS 3673-4 - B042M Default Default 511-3 Default M6 Default Default Default Default Default Default Default Default DefaultFastener/Configuration

S275 S275 S275 S275 S275 STD S275 STD S275 S275 STD PP S275 S275 PVC Rigid S275 S275 S275 S275 S275 S275

RHS 80 x 40 x 4 x 2080 (lg) 178 x 102 x 19kg/m RHS 80 x 80 x 5 x 759 (lg) STD 41.50 x 11.50 36mmx28mmx79.5mm 60 x 30mm as profiled as profiled as profiled Tube 457 x 6.3 (3549mm) 680 x 25mmDimensions

2816

2500

19

8

9

12 11

3016

46 45 44

1 12 12 12 1 1 2 1 2 1 1 2 2 2 2 2 1 2 2 2 2 2QTY.

6 72 72 72 6 6 12 6 12 6 6 12 12 12 12 12 6 12 12 12 12 12 Batch

Hand Geared Travel Hand Chain Hoist ( spark resistant ) Hex Nut M24 Flat Washer (Form A) HD Bolt M24 x 450 Nyloc Nut ( Thick ) M10 Hex Socket Head Cap Screw Spring Pin ( Slotted ) Pivot Shaft Buffer Lock Disc ( Right Side ) Lock Disc ( Left Side ) Nyloc Nut ( Thick ) Flat Washer (Form A) Hex Head Cap Screw Inner End Stop Outer End Stop Thrust Ball Bearing Tie Cap Bush (Metric Flanged) Bush Block Top Tie Bottom TieDescription

16 Default M24 STD Grade 8.0 Grade 8.8 Grade 8.8 Grade 8.0 Grade 8.8 Grade 8.8 EN8 Rubber S275 S275 Grade 8.8 Grade 8.0 8.8 S275 S275 STD PVC Rigid Brass S275 S275 S275 Bright Drawn 40 x 920mm as Profiled as Profiled as Profiled as Drawn AL 4050 69 x 69 x 50 as Profiled as ProfiledDimensions

15 14 13 12 11 10 9 8 7 6 5 4 3 2 1ITEM NO.

M24

M24 M24x450 M10 M10 x 80 10 x 80 Default Standard Right Side Left Side M20 M20 M20 x 90 Default End Stop - 100 SKF - 51108 - 40mm Default AL 4555 Default Default DefaultFastener/Configuration

90 Bolt Projection out of concrete

43 42 41

File Path : C:\C30631-01\Solidworks 3D Design\2 Tonne\Post Jib Crane

Ground 25mm by others

40 39 38 37 36

Base Level Floor Level 800

35 34 33 32 31 30 29 28 27

M20 M20

Customer:

HOT ENGINEERING & CONSTRUCTION CO.Date: 16/12/2010 Signature: Date: Date: Signature: Signature:

Scale:

1:15

Designed by: L.C. Checked by: Approved by:

A1DEBUR AND BREAK SHARP EDGES

XX.XX 0.5mm XX.X 1.0mm XX 3.0mm Angles: 1

Fabrication Linear Dimensions:

TOLERANCES - Unless otherwise stated.XX.XX 0.25mm XX.X 0.5mm XX 1.0mm Angles: 1

Machining Linear Dimensions: Fillet Radius:

Squareness: Parallelism: Runout: Surface Finish:

1 in 500 1 in 500 0.1mm 6.3 m

2000

26 25ITEM NO.

This Drawing , the intelectual Property Rights and THIRD ANGLE the informations contained here in, is confidential and shall not be under any circunstance Copied , PROJECTION Reproduced,used for manufacture , Distributed toThird Parties in Whole or in Part, or used for any other purpose without the express permission of Pelloby Engineering Ltd.Halesfield,Telford. Shropshire.TF74QT

Description:

S.W.L. 2 Tonne Spark Resistant 220Model Post Swing Jib CraneC30631Drawing No: 1-30631-1

Contract No:

Issue: 1