1 pista grit screw conveyor
TRANSCRIPT
-
7/29/2019 1 PISTA Grit Screw Conveyor
1/2
Onl ine : s mi tha nd lov e le s s .c om Phone : 9 1 3 .8 8 8 .5 2 0 1 FAX:9 1 3 .8 8 8 .2 1 7 3
Smith & Loveless Inc. System Innovators for global pumping, water and wastewater treatment
PISTA Grit Screw ConveyorThe second-stage PISTA Grit Screw Conveyor is
designed to work in concert with the complete PISTA
Grit Removal System, providing superb dewatering and
high retention of fine
grit without the burden
of high maintenance.
Dewatered grit
discharges into a
container for disposal
while the flow and
residual organics are
retuned to the inlet channel prior to the grit chamber,
typically 93% of the flow and 95% of the organics.
PISTA Grit Screw Conveyor
Introduced: 1989
System Benefit: Lamella plate design
aids in retention of fine
grit while reducing
turbulence & overflow
Upgrade from: Screens
Sizing: Models 15 & 17
Unique Design Elements Retain Ultra-Fine GritThePISTAGrit Screw Conveyors separate inlet zone, large Lamellaparallel plate section that acts as a high-rate settling device, and
double-sided weir trough work in concert to capture silt and and ultrafine grit. The inlet zone facilitates energy dissipation in order to reduceturbulence. This allows easier settling in the plate section while thelarger weir trough lowers the carry-over rate.
Ideal Upgrade for ScreensScreens are typically maintenance-intensive because of their messyoperation. Additionally, they can allow ultra-fine grit to be returned tothe flow stream. The PISTA Grit Screw Conveyor greatly reducesmaintenance concerns (and mess) while producing dryer grit.
Key Points
1
2
The PISTA Grit Screw Conveyor retains ultra-fine grit and effectively washes and dewaters it fordisposal all in a hassle-free operation. Lamellaparallel plates facilitate high rate settling.
-
7/29/2019 1 PISTA Grit Screw Conveyor
2/2
Onl ine : s mi tha nd lov e le s s .c om Phone : 9 1 3 .8 8 8 .5 2 0 1 FAX:9 1 3 .8 8 8 .2 1 7 3
Smith & Loveless Inc.System Innovators for global pumping, water and wastewater treatment
Complete Grit Removal, Handling & Dewatering System Flow Schem
PISTAGrit Chamber Influent enters flat-floor g
chamber hydraulically guided by coanda ramp, intern
baffles and central, low-speed propeller. Forced vort
drives grit particles to center chamber floor and into low
grit hopper while organics and flow continue to plant.
PISTATurbo Grit Pump Top-mounted or remo
mounted unit pumps collected grit slurry (kept fluid
the PISTAGrit Fluidizer) to the PISTAs second-sta
grit washing and dewatering system while also providi
proper head.
PISTAGrit Concentrator Specifically engineered
the PISTAsystem, this abrasion-resistant Ni-Hard u
washes grit further. It positions on the grit discharge lin
PISTA Grit Screw Conveyor Grit from t
concentrator deposits into the parallel (lamella) pla
section of the S&L dewatering screw conveyor, whi
aids in retaining finer grit and reducing the stream
turbulence and overflow rate.
Dewatered Grit Dischargesfrom the top of the inclin
screw conveyor into a container for disposal.
The Flow and any Residual Organics are Return
to the inlet channel prior to the grit chamber, typica
93% of flow and 95% of organics.
[1][1][1][1][1]
[2][2][2][2][2]
[3][3][3][3][3]
[6][6][6][6][6]
[5][5][5][5][5]
[4][4][4][4][4]
For maximum grit removal, the PISTAGrit Chamber should be
complemented with Smith & Loveless PISTA grit handling and
ewatering components, which transport, dewater and prepare the grit
or final disposal. These components can be retrofitted to increase the
fficiency of your grit handling system originally equipped with older
omponents or non-Smith & Loveless accessories.
mith & Loveless commitment to market leadership in grit removal
indles on-going research and development, which leads to continued
ystem and component innovations. See the timeline below of key
PISTA
design milestones.
PISTA Grit Removal System Components & Schem
Unparalleled Innovation For 30+ Years
1973 - PISTAGrit Removal System (270)
1974 - PISTAGrit Screw Conveyor
1981 - 50 MGD PISTAGrit Chamber
1982 - PISTAGrit Turbo Grit Pump (4)
1982 - 175 GPM PISTAGrit Concentrator
1984 - 70 MGD PISTAGrit Chamber
1988 - 360 PISTAIn-Line Design
1988 - 250 GPM PISTAGrit Concentrator
1989 - Parallel Plate PISTAGrit Screw Conveyor
1992 - PISTAGrit Fluidizer
1992 - 4 PISTAGrit Turbo Grit Pump
1998 - 6 PISTAGrit Turbo Grit Pump
1998 - 500 GPM PISTAGrit Concentrator
1999 - 100 MGD PISTAGrit Chamber
2004 - PISTAGrit Flow Control Baffle
2006 - PISTAGrit Stick Deflector