0c-esp8266 wroom wifi module datasheet cn v0.3 powerful mjiot-amb-03 on chip processing and storage...
TRANSCRIPT
MJIOT-AMB-03
Document version 01 (2017-02-01)
Shenzhen Minjun IOT Technology Co. Ltd. all rights reserved.
1
MJIOT-AMB-03
Product specification
MJIOT-AMB-03
Document version 01 (2017-02-01)
Shenzhen Minjun IOT Technology Co. Ltd. all rights reserved.
2
MJIOT-AMB-03module appearance
MJIOT-AMB-03
Document version 01 (2017-02-01)
Shenzhen Minjun IOT Technology Co. Ltd. all rights reserved.
3
目录1. Product overview....................................................................................................................................................4
1.1 Characteristic................................................................................................................................................ 5
1.2 main parameters...........................................................................................................................................6
1.2 Interface definition................................................................................................................................7
2. appearance and size............................................................................................................................................... 8
3. Performance description........................................................................................................................................9
3.1. MCU............................................................................................................................................................ 9
3.2. Performance description............................................................................................................................9
3.2.1. Built in SRAM FLASH and ROM............................................................................................9
3.3. operating temperature.............................................................................................................................11
3.4. Recommended working environment.....................................................................................................11
4. RF parameter..................................................................................................................................................... 11
5. Power waste..........................................................................................................................................................12
6. Digital pin I/O electrical characteristics...............................................................................................................13
7. Module installation notes.................................................................................................................................... 15
8. AT command transmission mode using MJIOT-AMB-03module........................................................................ 16
9. MJIOT-AMB-03Module JTAG/CMSIS-DAP debug................................................................................................ 17
10. MJIOT-AMB-03 Module download debug diagram...........................................................................................18
11. MJIOT-AMB-03Peripheral hardware reference design..................................................................................... 19
12. Company introduction........................................................................................................................................20
13. Physical map of development board................................................................................................................21
MJIOT-AMB-03
Document version 01 (2017-02-01)
Shenzhen Minjun IOT Technology Co. Ltd. all rights reserved.
4
1. Product overviewMJIOT-AMB-03 is a highly integrated single chip low-power 802.11n Wireless local
area network (WLAN) network controller. It integrates a ARM-CM4 kernel, MAC wireless
LAN, WLAN baseband and RF RF on a single chip. It can be a configurable GPIO
configuration is provided for the application and control of the Realtek RTL8710BN.
Integrated memory can complete all the functions of the WiFi protocol stack, also
provides application development to the memory and flash.
Figure 1 Realtek RTL8710BN structure
MJIOT-AMB-03
Document version 01 (2017-02-01)
Shenzhen Minjun IOT Technology Co. Ltd. all rights reserved.
5
MJIOT-AMB-03 is a complete and self-contained WiFi network solutions can be run
independently, but also can be used as the machine mounted on the other host MCU run
on.MJIOT-AMB-03 as should only processor device when using our SDK, according to
customer demand for solutions, not only can be reduced to the whole product the price
can also facilitate the subsequent maintenance and upgrading.
In addition cases, MJIOT-AMB-03 is responsible for the wireless internet access WiFi
adapter bear task, you can add it to any design based on micro controller, connection is
simple, only through the I2C/UART/SPI/RTC/TIMER/GPIO hardware interface, and use the
AT that refers to the development of networking products can be realized.
The powerful MJIOT-AMB-03 on chip processing and storage can, which can make the
equipment through specific GPIO port integrated sensors and other applications, to
achieve the minimal system resources occupied by the development and operation of the
minimum.
1.1 Characteristic Support 802.11 b/g/n mode, G mode maximum transmission rate of 54Mbps, n mode
maximum transmission rate of 150Mbps
Built in PLL, voltage regulator and power management components
Built in TCP/IP protocol stack
Built in PLL, voltage regulator and power management components WiFi @ 2.4 GHz
Support freeRtos embedded operating system, LWIP network protocol stack
J-Link/JTAG/CMSIS-DAP debug support
Support two high-speed serial port (the highest baud rate 4M b/s) and a log serial
port, FIFO programmable clock synchronization support receiving and sending
The two group ADC supports the voltage 0-5V
Two I2C, support SPI master-slave mode and DMA, the highest access speed is
400kbpsSupports up to 17 GPIO
Support for 8 clocks is 32.768KHz timer
Support STA/AP/STA+AP mode
MJIOT-AMB-03
Document version 01 (2017-02-01)
Shenzhen Minjun IOT Technology Co. Ltd. all rights reserved.
6
Supports fast distribution functions (including Android and iOS devices)
802.11b mode + 17 dBm output power
Standby power consumption less than 1 mW (DTIM3)
Operating temperature range: -20℃- 85℃
1.2 main parameters
Parameter ListCategory Arguments Description
Wireless
Parameter
wireless standards 802.11 b/g/n
frequency range 2.4GHz-2.5GHz (2400M-2483.5M)
CPU ARM Cortex M4 (125MHz)
ROM/RAM/Flash 1MB / 512KB (user available 140k) / external maximum 128M
PWM Maximum support 6
SPI Maximum support 1
UART 2 high speed serial port (the highest baud rate 15Mbps), 1 speed serial
ADC Maximum support 2
I2C Maximum support 1
GPIO Maximum support 17
working voltage 3.0~3.6V(Recommended 3.3V)
working temperature -20°~85°
Package size 18mm*20mm*0.6mm
Wireless network mode station/softAP/SoftAP+station
Data throughput 802.11b up to 54Mbps,802.11g up to 150Mbps
Software
Parameters
Security mechanism WPA/WPA2
Encryption type WEP/TKIP/AES
Update FirmwareThe local serial programming / upgrade / cloud host download
programming
Network protocol TCP/UDP/HTTP/FTP/SNTP/MQTT/SMTP
User configuration AT+ command, User development roid/iOS APP
SDKOpen source, support windows and Linux
MJIOT-AMB-03
Document version 01 (2017-02-01)
Shenzhen Minjun IOT Technology Co. Ltd. all rights reserved.
7
1.2 Interface definition
Figure 2 MJIOT-AMB-03pin map
MJIOT-AMB-03
Document version 01 (2017-02-01)
Shenzhen Minjun IOT Technology Co. Ltd. all rights reserved.
8
2. appearance and sizeMJIOT-AMB-03 The size of the patch module is 18mm*20mm*0.6mm(As shown in Figure
3)。
Figure 3 MJIOT-AMB-03Module appearance
MJIOT-AMB-03
Document version 01 (2017-02-01)
Shenzhen Minjun IOT Technology Co. Ltd. all rights reserved.
9
Figure 4 MJIOT-AMB-03 Module size diagram
3. Performance description
3.1. MCURealtek RTL8710BN is a low-power single chip. It integrates a ARM Cortex M3 MCU,
802.11n Wireless network controller is equal to one. It also provides some configurable
GPIO and other peripherals.
3.2. Performance description
3.2.1. Built in SRAM FLASH and ROM
MJIOT-AMB-03built-in memory controller, including ROM, FLASH and SRAM. Based on
SDK, the user can use the remaining SRAM space: SRAM size > 48kB 。
Internal integration of ROM (1Mb)
MJIOT-AMB-03
Document version 01 (2017-02-01)
Shenzhen Minjun IOT Technology Co. Ltd. all rights reserved.
10
MJWL-AMB-0 internal integrated 1Mb read-only access provides high speed, low
memory leakage, maximum clock 83MHz. Provide the following functions:
Startup code and MCU initialization
Default UART driver
Non flash enabled features and drivers
Peripheral LIBS
Security function library
Internal integration of SRAM (256Kb)
Internal integration FLASH (2Mb)
Figure 5 MJIOT-AMB-03 Flash memory layout
MJIOT-AMB-03
Document version 01 (2017-02-01)
Shenzhen Minjun IOT Technology Co. Ltd. all rights reserved.
11
3.3. operating temperatureTable 7 maximum ratings.
Rating condition value Unit
Storage temperature -40 to 125 ℃
Maximum welding 260 ℃
Supply voltage IPC/JEDEC J-STD-
020
+3.0 to +3.6 V
3.4. Recommended working environmentTable 8 recommended working environment
work environment Name minimum Typical Maximum Unit
working temperature -20 32 85 ℃
Supply voltage VDD 3.0 3.3 3.6 V
Note: if not specified, the test conditions are: VDD = 3.3 V, temperature of 20 ℃。
4. RF parameterTable 9 RF parameters
parameter Typical value Unit
Input frequency 2412-2483.5 MHz
Input resistance 50 Ω
output power
802.11b >17 dBm
802.11g >15 dBm
802.11n(HT20) >14 dBm
Receiving
sensitivity
11M ≤-76 dBm
54M ≤-65 dBm
65M(HT20) ≤-64 dBm
MJIOT-AMB-03
Document version 01 (2017-02-01)
Shenzhen Minjun IOT Technology Co. Ltd. all rights reserved.
12
5. Power wasteTable 10 power consumption
Pattern minimum value Typical value Maximum Unit
Deep Sleep Mode① 15 mA
Deep Standby Mode② 0.9 mA
Sleep Mode③ 10 uA
正常待机 30 mA
Comment①:Deep Sleep Mode deep sleep mode off the power domain, including Cortex-M3
kernel system, clock, and SRAM regulator. In addition to awaken the peripherals off source service:
a wakeup pin and a low precision timer wake-up system. In addition to keep the wakeup pin is not
closed, which he all registers a system restart after the closure. Wake up。
Comment ② : Deep Standby Mode closed deep standby mode including Cortex-M3 kernel,
system clock, and SRAM regulator. In addition to wake up the source is 4 GPIO and other
peripherals outside the system timer wake off. Only about 200 bytes of registers keep using wake
up, the other registers are turned off. The system is restarted, wake up。
Comment③:The Sleep Mode sleep mode shuts down the power domain, including the Cortex
-M3 kernel, and the system clock. The system does not need to be restarted to wake up
Table 12 comparison of low power mode resource
usage
MJIOT-AMB-03
Document version 01 (2017-02-01)
Shenzhen Minjun IOT Technology Co. Ltd. all rights reserved.
13
Table 13 low-power mode wake-up
contrast
6. Digital pin I/O electrical characteristics
MJIOT-AMB-03
Document version 01 (2017-02-01)
Shenzhen Minjun IOT Technology Co. Ltd. all rights reserved.
14
MJIOT-AMB-03
Document version 01 (2017-02-01)
Shenzhen Minjun IOT Technology Co. Ltd. all rights reserved.
15
7. Module installation notesMJIOT-AMB-03using the onboard PCB antenna module is required for the surrounding
environment. Suggestions are as follows: 6-9mm do not place the antenna within the
surrounding antenna components within the antenna; don't put 3-5mm below the
influence of the antenna components, if there is a need to do floor clearance processing;
don't put as much as possible under the module components and high frequency signal
line。
MJIOT-AMB-03
Document version 01 (2017-02-01)
Shenzhen Minjun IOT Technology Co. Ltd. all rights reserved.
16
8. AT command transmission mode using MJIOT-AMB-
03module
MJIOT-AMB-03
Document version 01 (2017-02-01)
Shenzhen Minjun IOT Technology Co. Ltd. all rights reserved.
17
9. MJIOT-AMB-03Module JTAG/CMSIS-DAP debug
MJIOT-AMB-03
Document version 01 (2017-02-01)
Shenzhen Minjun IOT Technology Co. Ltd. all rights reserved.
18
10.MJIOT-AMB-03 Module download debug diagram
MJIOT-AMB-03
Document version 01 (2017-02-01)
Shenzhen Minjun IOT Technology Co. Ltd. all rights reserved.
19
11.MJIOT-AMB-03Peripheral hardware reference design
MJIOT-AMB-03
Document version 01 (2017-02-01)
Shenzhen Minjun IOT Technology Co. Ltd. all rights reserved.
20
12.Company introductionThe company is headquartered in Shenzhen, is a collection research and development,
production and sales as one of the networking technology company with technology
and service oriented. And the main founder of the company team members have rich
networking industry background, WIFI module and networking products focused on the
development of core competitiveness, provide end-to-end IoT the overall solution. In
the development of policy support and industry Internet plus "background, min Jun
Wulian believe that the next Internet era is coming, a physical world is connected in the
world. Min Jun IOT will by virtue of their technical ability strong, fighting spirit of
enterprise, inThe attitude of the company, in order to promote the establishment of the
industry 4 help! All things interconnected, the wisdom of the earth, which is the dream
of mankind, but also sensitive to the ideal combination.