8/10/2019 04 DISPATCH Elevation Control A4

1/2

Dig within the planned elevation boundary;

achieve higher-quality results.

The DISPATCH Elevation Control solution offers a lower-cost

option for high-precision vertical guidance, when horizontal

accuracy is a lesser priority. LP+Z hardware (purchased

separately) determines the ground elevation of the shovel,

which is then transmitted, at one-second intervals, for display

on the in-cab field computer. The shovels actual elevation is

compared to the operator-set target, enabling operators to

benches,

profits

Accurate

higherquickly analyze the situation and keep the bench floor withindesign limits. With the DISPATCH Elevation Control solution,

operators are actively guided to dig to optimal elevation

levels, every time.

8/10/2019 04 DISPATCH Elevation Control A4

2/2M O D U L A R M I N I N G S Y S T E M S , I N C .

The contents of these materials are protected by federal and international intellectual

property laws. No portion of these materials may be reprinted, republished, modified,reproduced, sold or distributed in any form without the express written consentof Modular Mining Systems, Inc. Modular, IntelliMine, DISPATCH, MineCare,ProVision, RoadMap, MasterLink, PowerView, HaulRoute, AssetAlert, andModularReady are trademarks and/or registered trademarks and the sole andexclusive property of Modular Mining Systems, Inc. These materials may containthird-party copyright and/or trademark materials, the use of which has not alwaysbeen specifically authorized by the intellectual property owner. All copyrights and/ortrademarks contained in these materials are the sole and exclusive property of theirrespective owners.

These materials, including third-party information, are provided for informationpurposes only. Actual specifications may vary from those documented in thesematerials. Consult your local Modular office for further details.

Modular Mining Systems, Inc.3289 E. Hemisphere Loop | Tucson, AZ 85706-5028

U.S.A. | Phone: (520) 746-9127 | Fax: (520) 889-5790

www.modularmining.com2013 Modular Mining Systems, Inc. | PF-DSEVCRL-EN-A4-13

Increased excavation accuracy

Real-time indicators show current and target elevationinformation, enabling operators to easily see when

they are excavating to, below, or above, bench grade.

Enhanced ore identification

By digging only within the target elevation boundary, a

higher quality of the mined material can be achieved.

Improved bench consistency

GPS-guided positioning enables the shovel operator

to reduce variations in bench floor elevation. As a

result, the loading efficiency is improved and drillingcosts for the bench below are reduced.

Consistent overburden removal

In stratified deposits, on-screen guides assist in

the removal of overburden without digging into the

ore body.

Modular, a technology leader in the mining industry for over 30 years.

Feedback from hundreds of DISPATCH customers hascreated revolutionary advancements such as:

Main

Featu

res Real-time, visual feedback of actual shovel

elevation

Operator-defined target elevation boundaries

At-a-glance display of target and current

elevation deltas

Use of Real Time Kinematic (RTK) and GPS

navigation for vertical accuracy to within 1 cm

Integration with Modulars industry-leading

DISPATCH fleet management system

Actual shovel elevation is above the operator-defined target boundary

Actual shovel elevation is below the operator-defined target boundary