01. outdoor units
TRANSCRIPT
OD-1OUTDOOR UNITS
OUTDOOR UNITS
CITY MULTITM
DATA U1
OUTDOOR UNITS
GENERAL LINE-UP.............................................................................................................................. 1
Y SERIES ............................................................................................................................................. Y - 1
R2 SERIES ........................................................................................................................................... R2 -1
Optional parts for PUHY, PURY-P-TGMU............................................................................................ Op -1
GENERAL LINE-UP .....................................................................................................................................................OD-1
R2 SERIES....................................................................................................................................................................R2-1
Y SERIES........................................................................................................................................................................Y- 1
Optional parts for PUHY-P-TGMU, PURY-P-TGMU ..................................................................................................... OP-1
OD-2OUTDOOR UNITS
OUTD
OOR
UNIT
S
R2-1OUTDOOR UNITS
R2
R2 SERIES DATA U1
OUTDOOR UNITS
I.R2 SERIES
1. SPECIFICATIONS................................................................................................................................................R2- 3
2. EXTERNAL DIMENSIONS ...................................................................................................................................R2- 8
3. ELECTRICAL WIRING DIAGRAMS .....................................................................................................................R2-14
4. SOUND LEVELS ..................................................................................................................................................R2-16
5. REFRIGERANT CIRCUIT DIAGRAMS AND THERMAL SENSORS...................................................................R2-18
6. CAPACITY TABLES.............................................................................................................................................R2-20
6-1. Correction by temperature ............................................................................................................................R2-20
6-2. Correction by total indoor..............................................................................................................................R2-23
6-3. Correction by refrigerant piping length..........................................................................................................R2-29
6-4. Correction at frosting and defrosting.............................................................................................................R2-30
6-5. Temp. range of running ................................................................................................................................R2-30
1. SPECIFICATIONS..................................................................................................................................................R2-3
2. EXTERNAL DIMENSIONS.....................................................................................................................................R2-5
3. ELECTRICAL WIRING DIAGRAMS.......................................................................................................................R2-7
4. SOUND LEVELS....................................................................................................................................................R2-8
5. REFRIGERANT CIRCUIT DIAGRAMS AND THERMAL SENSORS.....................................................................R2-9
6. CAPACITY TABLES..............................................................................................................................................R2-10
6-1. Correction by temperature ............................................................................................................................R2-10
6-2. Correction by total indoor ..............................................................................................................................R2-12
6-3. Correction by refrigerant piping length ..........................................................................................................R2-14
6-4. Correction at frosting and defrosting .............................................................................................................R2-15
6-5. Temp. range of running .................................................................................................................................R2-15
R2-SERIES
R2-2OUTDOOR UNITS
R2
DATA U1
I.R2 SERIES
CITY MULTI™ OUTDOOR UNITS
R2 SERIES
Heat recovery: PURY-P-TGMU-A(-BS)
OA room (Cooling)
Officecompartment (Heating)Office (Heating)
Office(Cooling)
Indoor unit
Meeting room (Heating)
BC controller Main-unitMeeting room (Cooling)
To BC controller (Sub-unit) (3-pipe)Outdoor unit
Refrigerant piping: 2-pipe type
R2 Heat recovery
BTU/h
BTU/h
* Nominal conditions *1, *2 are referable at the Specification sheet.
18HP 20HP 22HP 24HP16HP10HP 12HP 14HP8HP
P72 P96
26HP
P234P108 P126 P144 P168 P192 P204 P216
80,000
72,000
108,000
96,000
120,000
108,000
140,000
126,000
160,000
144,000
188,000
168,000
216,000
192,000
228,000
204,000
248,000
216,000
268,000
234,000Nominal cooling cap.*1
Nominal heating cap.*2
R2-3OUTDOOR UNITS
R2
1. SPECIFICATIONS DATA U1
1. SPECIFICATIONS
Model PURY-P72TGMU-A(-BS) PURY-P96TGMU-A(-BS)
Power source 3-phase 3-wire 208-230 V 60Hz
Cooling capacity *1 BTU / h 72,000 96,000
(Nominal) *1 kW 21.1 28.1
Power input kW 6.48 8.67
Current input(208-230) A 19.9-18.0 26.7-24.1
COP (kW / kW) 3.25 3.24
Temp. range of Indoor 59 to 75 degFW.B. (15 to 24 degCW.B.)
cooling Outdoor 23 to 109 degFD.B. (-5 to 43 degCD.B.)
32 to 109 degFD.B. ( 0 to 43degCD.B. ) Outdoor unit below Indoor unit
Heating capacity *2 BTU / h 80,000 108,000
(Nominal) *2 kW 23.4 31.7
Power input kW 6.33 8.56
Current input(208-230) A 19.5-17.6 26.4-23.8
COP (kW / kW) 3.69 3.70
Temp. range of Indoor 59 to 81 degFD.B. (15 to 27 degCD.B.)
heating Outdoor -4 to 60 degFW.B. (-20 to 15.5 degCW.B.)
Indoor unit Total capacity 50-150% of outdoor unit capacity 50-150% of outdoor unit capacity
connectable Model / Quantity P06-P96 / 1-15 P06-P96 / 1-19
Noise level (measured in anechoic room) dB <A> 56 57
Diameter of Liquid (High press.)in. (mm)
5/8 (15.88) Brazed + Flare 3/4 (19.05) Brazed + Flare
refrigerant pipe
(O.D.) Gas (Low press.) in. (mm) 3/4 (19.05) Brazed 7/8 (22.2) Brazed
External finish Pre-coated galvanized sheets(+powder coating for -BS type)
<MUNSELL 5Y 8/1 or similar>
External dimension H x W x D in. 72-15/32 x 39 x 33-3/32 72-15/32 x 39 x 33-3/32
mm 1,840 x 990 x 840 1,840 x 990 x 840
Net weight lbs(kg) 536 (243) 574 (260)
Heat exchanger Salt-resistant cross fin & copper tube Salt-resistant cross fin & copper tube
Compressor Type Inverter scroll hermetic comp. Inverter scroll hermetic comp.
Manufacturer AC&R Works,MITSUBISHI ELECTRIC CORPORATION
Starting method Inverter Inverter
Motor output kW 4.7 6.7
Case heater kW 0.057(230V) 0.057(230V)
Lubricant MEL32 MEL32
FAN Airflow rate cfm 7,050 7,050
m3 / min 200 200
L / s 3,333 3,333
External static press. in.WG(Pa) 0 (0) 0 (0)
Type x Quantity Propeller fan x 1 Propeller fan x 1
Control, Driving mechanism Inverter-control , Direct-driven Inverter-control , Direct-driven
Motor output kW 0.38 x 1 0.38 x 1
HIC circuit (HIC: Heat Inter-Changer) -
Protection High pressure protection High pressure sensor, High pressure switch 601 psi (4.15 MPa)
Inverter circuit (COMP. , FAN) Over-current protection,Over-heat protection
Compressor Over-heat protection
Fan motor Thermal switch
Defrosting method Auto-defrost mode (Reversed refrigerant circle)
Refrigerant Type x Original charge lbs + oz (kg) R410A x (23 lbs + 3 oz) (10.5kg) R410A x (28 lbs + 11 oz) (13.0kg)
Control indoor LEV and BC controller
Drawing External W659655
Wiring W274647
Refrigerant cycle -
Standard Document Installation Manual Installation Manual
attachment Accessory Details refer to External Drw W659655 Details refer to External Drw W659655
Optional parts High static pressure motor : PAC-KBU04MT-U-F
Joint : CMY-Y102S-G,CMY-R160-J
BC controller: CMB-P104,105,106,108,1010,1013,1016NU-G
Main BC controller:CMB-P108,1010,1013,1016NU-GA
Sub BC controller: CMP-P104,108NU-GB
Remark Details on foundation work,duct work,insulation work,electrical wiring,power source switch,and other items shall be re-
ferred to the Installation Manual.
Note : *1 Nominal cooling conditions *2 Nominal heating conditions Unit converter
Indoor : 80degF D.B. / 67degF W.B. 70degF D.B. kcal/h = kW x 860
(26.7degC D.B. / 19.4degC W.B.) (21.1degC D.B.) BTU/h = kW x 3,412
Outdoor : 95degF D.B. 47degF D.B. / 43degF W.B. cfm = m3/min x 35.31
(35degC D.B.) (8.3degC D.B. / 6.1degC W.B.) lbs = kg / 0.4536
Pipe length : 25 ft. (7.6 m) 25 ft. (7.6 m)
Level difference : 0 ft. (0 m) 0 ft. (0 m) *Above specification data is
subject to rounding variation.
*Due to continuing improvement, above specification may be subject to change without notice.
Ref.: Spec_PURY-P72-96TGMU
R2-4OUTDOOR UNITS
R2
1. SPECIFICATIONS DATA U1
Model PURY-P108TGMU-A(-BS) PURY-P126TGMU-A(-BS)
Power source 3-phase 3-wire 208-230 V 60Hz
Cooling capacity *1 BTU / h 108,000 126,000
(Nominal) *1 kW 31.7 36.9
Power input kW 9.73 11.36
Current input(208-230) A 30.0-27.1 35.0-31.6
COP (kW / kW) 3.25 3.24
Temp. range of Indoor 59 to 75 degFW.B. (15 to 24 degCW.B.)
cooling Outdoor 23 to 109 degFD.B. (-5 to 43 degCD.B.)
32 to 109 degFD.B. ( 0 to 43degCD.B. ) Outdoor unit below Indoor unit
Heating capacity *2 BTU / h 120,000 140,000
(Nominal) *2 kW 35.2 41.0
Power input kW 9.92 11.67
Current input(208-230) A 30.6-27.6 36.0-32.5
COP (kW / kW) 3.54 3.51
Temp. range of Indoor 59 to 81 degFD.B. (15 to 27 degCD.B.)
heating Outdoor -4 to 60 degFW.B. (-20 to 15.5 degCW.B.)
Indoor unit Total capacity 50-150% of outdoor unit capacity 50-150% of outdoor unit capacity
connectable Model / Quantity P06-P96 / 1-20 P06-P96 / 1-20
Noise level (measured in anechoic room) dB <A> 60 61
Diameter of Liquid (High press.)in. (mm)
3/4 (19.05) Brazed + Flare 3/4 (19.05) Brazed
refrigerant pipe
(O.D.) Gas (Low press.) in. (mm) 7/8 (22.2) Brazed 1-1/8 (28.58) Brazed
External finish Pre-coated galvanized sheets(+powder coating for -BS type)
<MUNSELL 5Y 8/1 or similar>
External dimension H x W x D in. 72-15/32 x 39 x 33-3/32 72-15/32 x 50-13/16 x 33-3/32
mm 1,840 x 990 x 840 1,840 x 1,290 x 840
Net weight lbs(kg) 574 (260) 672 (304)
Heat exchanger Salt-resistant cross fin & copper tube Salt-resistant cross fin & copper tube
Compressor Type Inverter scroll hermetic comp. Inverter scroll hermetic comp.
Manufacturer AC&R Works,MITSUBISHI ELECTRIC CORPORATION
Starting method Inverter Inverter
Motor output kW 8.0 8.5
Case heater kW 0.057(230V) 0.057(230V)
Lubricant MEL32 MEL32
FAN Airflow rate cfm 7,050 8,450
m3 / min 200 240
L / s 3,333 4,000
External static press. in.WG(Pa) 0 (0) 0 (0)
Type x Quantity Propeller fan x 1 Propeller fan x 1
Control, Driving mechanism Inverter-control , Direct-driven Inverter-control , Direct-driven
Motor output kW 0.38 x 1 0.64 x 1
HIC circuit (HIC: Heat Inter-Changer) -
Protection High pressure protection High pressure sensor, High pressure switch 601 psi (4.15 MPa)
Inverter circuit (COMP. , FAN) Over-current protection,Over-heat protection
Compressor Over-heat protection
Fan motor Thermal switch
Defrosting method Auto-defrost mode (Reversed refrigerant circle)
Refrigerant Type x Original charge lbs + oz (kg) R410A x (28 lbs + 11 oz) (13.0kg) R410A x (36 lbs + 7 oz) (16.5kg)
Control indoor LEV and BC controller
Drawing External W659655 W659656
Wiring W274647 W274647
Refrigerant cycle - -
Standard Document Installation Manual Installation Manual
attachment Accessory Details refer to External Drw W659655 Details refer to External Drw W659656
Optional parts High static pressure motor : PAC-KBU04MT-U-F
Joint : CMY-Y102S-G,CMY-R160-J
BC controller: CMB-P104,105,106,108,1010,1013,1016NU-G
Main BC controller:CMB-P108,1010,1013,1016NU-GA
Sub BC controller: CMP-P104,108NU-GB
Remark Details on foundation work,duct work,insulation work,electrical wiring,power source switch,and other items shall be re-
ferred to the Installation Manual.
Note : *1 Nominal cooling conditions *2 Nominal heating conditions Unit converter
Indoor : 80degF D.B. / 67degF W.B. 70degF D.B. kcal/h = kW x 860
(26.7degC D.B. / 19.4degC W.B.) (21.1degC D.B.) BTU/h = kW x 3,412
Outdoor : 95degF D.B. 47degF D.B. / 43degF W.B. cfm = m3/min x 35.31
(35degC D.B.) (8.3degC D.B. / 6.1degC W.B.) lbs = kg / 0.4536
Pipe length : 25 ft. (7.6 m) 25 ft. (7.6 m)
Level difference : 0 ft. (0 m) 0 ft. (0 m) *Above specification data is
subject to rounding variation.
*Due to continuing improvement, above specification may be subject to change without notice.
Ref.: Spec_PURY-P108-126TGMU
R2-5OUTDOOR UNITS
R2
2. EXTERNAL DIMENSIONS DATA U1
2. EXTERNAL DIMENSIONS
PURY-P72,96,108TGMU-A(-BS) Drw. : PURY-TGMU_W659655 1/2
Unit : mm(in)
(Mo
un
tin
g h
ole
)
Kn
ocko
ut
ho
le<
Fro
nt
pip
ing
ho
le>
Cro
ss s
ection X
-X
Cro
ss s
ection Y
-Y
<A
cce
sso
rie
s>
(P
acka
ge
d in
th
e a
cce
sso
ry k
it)
(
Alre
ad
y in
sta
lled
on
th
e u
nit)
(A
tta
ch
ed
ne
ar
the
ba
ll va
lve
)
Re
frig
. se
rvic
eva
lve
(Lo
w p
ressu
re)
<F
lan
ge
>
Kn
ocko
ut
ho
le<
Le
ft p
ipin
g h
ole
>
<L
eft
sid
e h
ole
fo
r c
on
tro
l w
irin
g>
Re
frig
. se
rvic
e
va
lve
(H
igh
pre
ssu
re)
<F
lare
>
Se
rvic
e p
an
el
Kn
ocko
ut
ho
le
Left s
ide v
iew
Fro
nt vie
w
Top v
iew
2X
2-1
4(9
/16
)X2
0(1
3/1
6)
0va
l ho
le
Knockout hole
<B
ottom
pip
ing h
ole
>
<B
ottom
hole
for
contr
ol w
irin
g>
<H
ole
for
pow
er
supply
>
attached c
onduit m
ounting p
late
<A
ccessory
>
Air
inle
t
Air
inle
t
Air o
utlet
13
5(5
-11
/32
)
13
5(5
-11
/32
)
14
5(5
-23
/32
)
A
P7
2
Mo
de
lB
11
5(4
-17
/32
)
12
0(4
-3/4
)
12
0(4
-3/4
)
P9
6
P1
08
Co
nn
. p
ipe
(Lo
w p
ressu
re)
Co
nn
. p
ipe
(Hig
h p
ressu
re)
207
83
B
A
(19-1
5/3
2)
(39)
(35-7
/16)
(21/32)
(34-17/32)
(33-9/32)
(33-3/32)
(1-2
5/3
2)
(21/32)
(1-2
5/3
2)
(21-25/32)
(13/16) (2-25/32)
(3-5
/32)
(30-1
/4)
(6-5
/16)
(2-9
/16)
(3-5/32) (2-1/4)
(3-9
/32)
(10-7/16)
(72-15/32)
(62-1/32)
(3-3/32) (7/16)
(2-2
1/3
2)
(8-5
/32)
(8-5
/32)
(2-2
1/3
2)
(3-1
5/1
6)
(7-1/4)(19/32)(2-2
1/3
2)
(6-5
/16)
(9-9/32)
(11-1/32)
(5-9/32)(3-15/16)
(1-1
9/3
2)
(3-5
/32)(5
-11/3
2)
(1-1
5/3
2)
(4-5
/8)
(4-5
/8)
(1-1
5/3
2)
(3-9/16) (13/32)
(7/3
2)
(1/2
)
(2-3/32)
No
te1
.Use
th
e o
pe
nin
g a
t th
e b
ott
om
of
the
un
it
wh
en
ru
nn
ing
th
e p
ow
er
su
pp
ly lin
e f
rom
th
e f
ron
t o
r fr
om
th
e s
ide
of
the
un
it.
No
te2
.Ple
ase
re
fer
to t
he
ne
xt
pa
ge
fo
r in
form
atio
n
reg
ard
ing
ne
ce
ssa
ry s
pa
cin
g a
rou
nd
th
e
un
it a
nd
fo
un
da
tio
n w
ork
.
YY
100
15 184
51
2
37
117
117
37
768
65
160
5780
494
553
134
280
135
80
40
1090
100
80
7020
265
45
900(m
ounting p
itch)
45
16845(mounting pitch)
877
XX
78
67
207
67
840
16
990
67
160
235
11
1840
1575
R2-6OUTDOOR UNITS
R2
2. EXTERNAL DIMENSIONS DATA U1
Spacing PURY-P72,96,108TGMU-A(-BS) Drw. : PURY-TGMU_W659655 2/2
Unit : mm(in)
450450
45
04
50
450450
10
00
10
00
10
00
10
00
900450
900450450
45
04
50
45
04
50
45
04
50
450 450
45
04
50
**
*
*
In c
ase o
f colle
ctive insta
llation a
nd c
ontinuous insta
llation
Wa
ll h
eig
ht
<H
>
Wa
ll h
eig
ht
<H
>W
all
he
igh
t <
H>
Wa
ll h
eig
ht
<H
>
Wa
ll h
eig
ht
<H
>
Wa
ll h
eig
ht
<H
>
No
re
str
ictio
ns o
n w
all
he
igh
t
Wa
ll h
eig
ht
<H
>
M1
0 A
nch
or
Bo
lt
<L
oca
l su
pp
ly>
Co
rne
r
<S
ide v
iew
>N
o r
estr
ictio
ns o
n w
all
he
igh
t
<
left
an
d r
igh
t>
Fro
nt
<To
p v
iew
>
AA
AA A
AA
A
B B
B
A
AA
B BB
B
BA
AA
AA
Fro
nt
Mu
st
be
op
en
A B
[B
asic
rule
s for
spacin
g the u
nit]
2.F
oundation w
ork
[When inle
t air e
nte
rs fro
m r
ight
and left s
ides o
f unit]
1.S
pace r
equired a
round u
nit
In c
ase o
f sin
gle
insta
llation
H’ H
Hh
(17-23/32) (17-23/32)
(17-23/32)(35-7/16)
(17-23/32) (17-23/32)
(17
-23
/32
)
(39
-3/8
)
(17-23/32) (17-23/32) (35-7/16) (17-23/32)(17-23/32)
(39
-3/8
)(3
9-3
/8)
(39
-3/8
)
(17
-23
/32
)
(17
-23
/32
)
(17-2
3/3
2)
(17-2
3/3
2)(
17-2
3/3
2)(
17-2
3/3
2)(
17-2
3/3
2) (1
7-2
3/3
2)
(17
-23
/32
)
R2-7OUTDOOR UNITS
R2
3. ELECTRICAL WIRING DIAGRAMS DATA U1
3. ELECTRICAL WIRING DIAGRAMS
SW
4-7:
OF
F (
Com
pres
sor
ON
/OF
F a
nd N
IGH
T M
OD
E)
L1
L2
L3
black
red
SV
2
SV
4a
SV
4b
SV
4c
SV
4d
blackwhitered
Fu
nctio
nse
ttin
g
101
101
101
101
P1
26
/14
4
SH
OR
T
OP
EN
LE
D1 o
pera
tion
LE
D2 e
rror
LD
1
Contr
ol circuit b
oard
Gate
am
p b
oard
FA
N c
ontr
ol board
LE
D1 o
pera
tion
LE
D2 e
rror
LE
D3 c
harg
e
Pow
er
circuit b
oard
SN
OW
Un
it a
dd
ress s
ett
ing
TB
1(T
erm
ina
l B
lock)
DS
(Dio
de
sta
ck)
TB
3
TB
7
Indoor/
outd
oor
transm
issi
on li
ne
Centr
al c
ontr
ol
transm
issi
on li
ne
M
oto
r(C
om
pre
sso
r)
Fu
nctio
n s
ett
ing
Function s
ettin
g
NIG
HT
MO
DE
F
an
mo
tor
(Heat exc
hanger)
Fu
nctio
nse
ttin
g
N
F(N
ois
e F
ilte
r)
MC
T(T
ran
sfo
rme
r)
Tro
ub
le
12V
Sh
ield
Gro
und
Pow
er
sourc
e
3~
208/2
30V
60H
z
LD
2
Co
mp
resso
r O
N/O
FF
Co
mp
resso
r O
N/O
FF
CH
11
SV
1
63
H1
21
S 4
a
MF
de
tectio
n c
ircu
it
MF
1
or
ST
EP
DE
MA
ND
52
C
G
G
G
<D
iffe
rence o
f applia
nce>
, G
CN
04
1 2 3
Inve
rte
r co
ntr
olle
r b
ox
R23
R22
2 1 0
*1
black
white
green
red
black
red
S
L1
L3
X01
<S
ym
bol expla
nation>
:exis
t X
:no
t e
xis
t
X
Mo
de
l
P7
2/9
6/1
08
Nam
eS
ym
bol
SH
OR
TO
PE
N
OP
EN
SH
OR
T
CN
3D
1-2
P
CN
3D
1-3
P
10
0% 0
%
75
%
50
%
Co
mp
resso
r
ON
/OF
F
CN
3D
1-3
P
OP
EN
SH
OR
T
CN
3D
1-2
P
NIG
HT
MO
DE
OF
F
ON
SW
4-7
:ON
(S
TE
P D
EM
AN
D)
OF
F
ON
*3
blackwhitered
Low
pre
ssure
sensor
Hig
h p
ressure
sensor
Therm
isto
r
Moto
r F
an R
adia
tor
panel
SW
2
X04
Rad
iato
r pan
el te
mp.
det
ect
TH
HS
1,5
*3
F01
G
M2
M1
M2
M1
G
*1
AC
250V
6.3
A T
1 2 3 4 5 6 7 8 9
1 2 3 4 5 6 7 8 9 10
11
12
13
14
1 2 3 4 5 6 7 8 9
1 2 3 4 5 6 7 8 9 10
11
12
13
14
AC
250V
6.3
A T
SW
U3
*1 T
he b
roken lin
es indic
ate
fie
ld w
irin
g.
*2 F
unction a
ccord
ing to s
witch o
pera
tion.
(S
W4-7
,CN
3D
1-2
P,a
nd C
N3D
1-3
P)
AC
Curr
ent S
ensor
AC
CT
Re
lay(I
nve
rte
r m
ain
circu
it)
Hig
h p
ressure
sw
itch
Dis
char
ge p
ipe
tem
p. d
etec
t
Term
inal blo
ck
52C
63H
1
TH
11
TB
1,3
,7
63H
S
L1,L
2
63LS
Choke c
oil(
Tra
nsm
issio
n)
DC
Curr
ent S
ensor
Cra
nk c
ase h
eate
r(C
om
pre
ssor)
4-w
ay v
alv
e
Sole
noid
valv
e(D
ischarg
e-s
uction b
ypass)
OA
tem
p. dete
ct
Pip
e te
mp.
dete
ct(H
ex o
utle
t)
liqui
d ou
tlet t
emp.
dete
ct
at
Su
b-c
oo
l co
il
Gro
und term
inal
DC
CT
MF
1
CH
11
SV
1,2
21S
4a
TH
5
TH
6
TH
7
Sole
noid
valv
e(H
eat exchanger
capacity c
ontr
ol)
SV
4a~
d
Function d
evic
eZ
20
DC
reacto
r(P
ow
er
facto
r im
pro
vem
ent)
DC
L
1 2
3 4
5
G
X05
1 2 3 4 5 6
CN
34
red
X06
X07
C5
ZN
R4
CN
FA
N r
ed
3 2 1
CN
40
CN
41
1 2
3 4
1 2
3 4
bla
ck
white
red
X52
AC
CT
AC
CT
-W
AC
CT
-U
V
U W
1 2
3 4
5 6
7 8
1 2
3 4
5 6
7 1 2C
NF
Gblu
e
CN
RS
1C
NV
CC
1
1 2
1 2
1 2
R2
L1
L2
1 2
TH
HS
1
1 6
1 4
SW
1S
W2
CN
30V
red
CN
TH
gre
en
CN
L1
CN
L2
CN
CT
1 2
3 4
CN
AC
2
F01
AC
250C
2A
T
1 2 3 4
CN
CT
2blu
e
CN
DC
2yello
w
CN
15V
2
CN
DR
2
CN
15V
1
CN
DR
1
CN
DC
1yello
w
1 2 3
1 2 3
U V
W
C4
NP
IPM
CN
DC
24 3 2 1
AC
250V
3.1
5A
T
bla
ck
white
red
1
2
3
4DC
CT
red
bla
ck
C1
DC
L
FN
5
FN
4
FN
3
FN
252C
R1
FN
1
bla
ck
red
L1 L2 L3
L1
G
L2
L3
1 2
3 4
51
2 3
F1
F2
CN
21
blu
eC
N20
ZN
R1~
4D
SA
CN
TY
P5
CN
HC
NT
YP
4 C
NL
bla
ck
CN
01
CN
02
CN
TY
P1
red
1 2
31
2 3
63H
S63LS
TH
11
TH
5T
H6
TH
7
8 7
6 5
4 3
2 1
3 2
13
2 1
3 2
12
12
12 1
Z20
1 2 3 1 2 3 4 5 6 7 8 9 1 2 3 4 5 61 2 3 1 2 3 1 2 3
CN
S2
blu
eC
NS
1blu
e
1 2
3
1 2
X01
X03
X08
X09
CN
32
CN
33
CN
36
CN
35
red
CN
38
gre
en
CN
52C
yello
w*2
*2
SW
U1
SW
U2
1
10
SW
5S
W4
SW
3S
W2
SW
1
3 2 13 2 1
1 2 3 4 5
CN
51
CN
3S
red
CN
3D
CN
AC
3bla
ck
CN
RS
3B
CN
VC
C1
CN
RS
3A
1 2 3 4 5 6 7 81 2 3 4 5 6 71 2 31 2 3 4 5 6 71 4
U V W
1 2 3
6 5 4 3 2 1
1 2 3 4 5 6 7 1 2 3
AC
250V
15A
T
F01
1 2
3
1 2
TH
HS
5
CN
TH
gre
en
CN
VD
C
CN
INV
CN
RS
2
CN
TR
PURY-P72,96,108,126,144TGMU-A(-BS) Drw. :PURY-TGMU_W274647PURY-P72,96,108TGMU-A(-BS)
R2-8OUTDOOR UNITS
R2
4. SOUND LEVELS DATA U1
4. SOUND LEVELS
Measurement
location
3-1/4ft.
(1m)
3-1
/4ft.
(1m
)
Measurement conditionPURY-P72,96,108,126,144TGMU-A(-BS)
63 125 250 500 1k 2k 4k 8k dB(A)
Standard 60Hz 63.0 64.0 57.5 55.0 50.5 50.5 54.0 50.0 60.0
Night Mode 60Hz 64.0 55.0 48.5 46.5 42.5 43.0 41.5 40.0 51.0When Night Mode is set,the A/C system's capacity is limited. The system could return to normal operation fromNight Mode automatically in the case that the operation condition is severe.
10
20
30
40
50
60
70
80
90
63 125 250 500 1k 2k 4k 8k
NC-40
NC-30
NC-20
NC-60
NC-50
NC-70
Octave band central frequency (Hz)
Octa
ve
ba
nd
so
un
d le
ve
l (d
B)
Approximate minimum
audible limit on
continuous noise
Stand 60Hz
Night 60Hz
Sound level of PURY-P108TGMU-A(-BS) Ref.:NC_PURY-P108TGMU_WYNB0-4273
63 125 250 500 1k 2k 4k 8k dB(A)
Standard 60Hz 61.5 57.5 54.5 52.5 49.0 48.0 48.0 42.5 56.0
Night Mode 60Hz 61.0 54.5 50.0 46.0 41.5 39.5 37.0 38.0 49.0When Night Mode is set,the A/C system's capacity is limited. The system could return to normal operation fromNight Mode automatically in the case that the operation condition is severe.
10
20
30
40
50
60
70
80
90
63 125 250 500 1k 2k 4k 8k
NC-40
NC-30
NC-20
NC-60
NC-50
NC-70
Octave band central frequency (Hz)
Octa
ve
ba
nd
so
un
d le
ve
l (d
B)
Approximate minimum
audible limit on
continuous noise
Stand 60Hz
Night 60Hz
Sound level of PURY-P72TGMU-A(-BS) Ref.:NC_PURY-P72TGMU_WYNB0-4271
63 125 250 500 1k 2k 4k 8k dB(A)
Standard 60Hz 67.5 68.5 60.5 58.5 54.5 50.5 48.0 42.5 61.0
Night Mode 60Hz 64.0 55.0 48.5 46.5 44.5 45.0 43.5 42.0 52.0When Night Mode is set,the A/C system's capacity is limited. The system could return to normal operation fromNight Mode automatically in the case that the operation condition is severe.
10
20
30
40
50
60
70
80
90
63 125 250 500 1k 2k 4k 8k
NC-40
NC-30
NC-20
NC-60
NC-50
NC-70
Octave band central frequency (Hz)
Octa
ve
ba
nd
so
un
d le
ve
l (d
B)
Approximate minimum
audible limit on
continuous noise
Stand 60Hz
Night 60Hz
Sound level of PURY-P126TGMU-A(-BS) Ref.:NC_PURY-P126TGMU_WYNB0-4274
Measurement conditionPURY-P72,96,108TGMU-A(-BS)
63 125 250 500 1k 2k 4k 8k dB(A)
Standard 60Hz 62.5 58.5 55.5 53.0 49.5 49.0 49.0 43.0 57.0
Night Mode 60Hz 60.0 56.5 50.0 45.5 41.0 38.5 38.0 39.0 49.0When Night Mode is set,the A/C system's capacity is limited. The system could return to normal operation fromNight Mode automatically in the case that the operation condition is severe.
10
20
30
40
50
60
70
80
90
63 125 250 500 1k 2k 4k 8k
NC-40
NC-30
NC-20
NC-60
NC-50
NC-70
Octave band central frequency (Hz)
Octa
ve
ba
nd
so
un
d le
ve
l (d
B)
Approximate minimum
audible limit on
continuous noise
Stand 60Hz
Night 60Hz
Sound level of PURY-P96TGMU-A(-BS) Ref.:NC_PURY-P96TGMU_WYNB0-4272
R2-9OUTDOOR UNITS
R2
5. REFRIGERANT CIRCUIT DIAGRAMS AND THERMAL SENSORS DATA U1
5. REFRIGERANT CIRCUIT DIAGRAMS AND THERMAL SENSORS
63
HS
CJ1
O/S
TH
11
CJ2
SV
1
CP
1
BV
2
Com
p1
Acc
63
H1
21
S4
a
ST
6
ST
5
ST
1
63
LS
ST
10
ST
11
BV
1C
V8
a
CV
10
aC
V9
aC
V5
a
CV
4a
CV
2a
CV
6a
CV
7a
TH
6
TH
7
TH
5
SV4a
SV
4b
SV
4c
SV
4d
Orifice
ST
14
HE
Xb
1
HE
Xf1
HE
Xf2
HE
Xf3
ST
15
ST
16
ST
17
SV
2
Ch
eck V
alv
es B
lock
So
len
oid
Va
lve
s B
lock
Fu
sib
lep
lug
PURY-P72,96,108,126,144TGMU-A(-BS) Drw. : RC_PURY-P72-144TGMU
CV
3a
PURY-P72,96,108TGMU-A(-BS)
R2-10OUTDOOR UNITS
R2
6. CAPACITY TABLES DATA U1
6. CAPACITY TABLES6-1. Correction by temperatureCITY MULTITM could have varied capacity at different designing temperature. Using the nominal cooling/heating capacity value
and the ratio below , the capacity can be observed at various temperature.
Ratio of cooling capacity and power input Outdoor temperature
Ratio of heating capacity and power input Outdoor temperature
-5 0 5 10 15 20 25 30 35 40 4523 32 41 50 59 68 77 86 95 104 113
°CDB°FDB
1.3
1.1
1.2
1.0
0.9
0.8
0.7
Rat
io o
f p
ow
er in
pu
t
-20-4
-155
-1014
-523
032
541
1050
1559
°CWB°FWB
0.6
0.9
1.0
1.1
0.8
0.7
0.6
0.5
Rat
io o
f p
ow
er in
pu
t
1.3
1.2
1.0
0.9
0.8
0.7
0.6
1.1
Rat
io o
f co
olin
g c
apac
ity
Indoor Temperature
24°CWB75.2°FWB
22°CWB71.6°FWB
20°CWB68°FWB
18°CWB64.4°FWB
16°CWB60.8°FWB
15°CWB59°FWB
24°CWB75.2°FWB
22°CWB71.6°FWB
20°CWB68°FWB
18°CWB64.4°FWB
16°CWB60.8°FWB
15°CWB59°FWB
1.3
1.4
1.2
1.0
0.9
0.8
0.7
1.1
Rat
io o
f h
eati
ng
cap
acit
y
15°CDB59°FDB
21.1°CDB70°FDB
25°CDB77°FDB
27°CDB80°FDB
15°CDB59°FDB
21.1°CDB70°FDB
25°CDB77°FDB
27°CDB80°FDB
Indoor Temperature
Ref:CbT_PURY-P72-96TGMU
NominalCoolingCapacity
Input
kW
BTU/h
kW
NominalHeatingCapacity
Input
kW
BTU/h
kW
PURY- P72TGMU P96TGMU
PURY- P72TGMU P96TGMU
21.1
72,000
6.48
28.1
96,000
8.67
23.4
80,000
6.33
31.7
108,000
8.56
R2-11OUTDOOR UNITS
R2
6. CAPACITY TABLES DATA U1
Ratio of cooling capacity and power input Outdoor temperature
Ratio of heating capacity and power input Outdoor temperature
-5 0 5 10 15 20 25 30 35 40 4523 32 41 50 59 68 77 86 95 104 113
°CDB°FDB
1.2
1.3
1.0
1.1
0.9
0.8
0.7
0.6
Rat
io o
f p
ow
er in
pu
t
-20-4
-155
-1014
-523
032
541
1050
1559
°CWB°FWB
0.8
0.9
1.0
1.1
0.7
0.6
0.5
0.4
Rat
io o
f p
ow
er in
pu
t
1.4
1.3
1.1
1.0
0.9
0.8
1.2
Rat
io o
f co
olin
g c
apac
ity
Indoor Temperature
24°CWB75.2°FWB
22°CWB71.6°FWB
20°CWB68°FWB
18°CWB64.4°FWB
16°CWB60.8°FWB
15°CWB59°FWB
24°CWB75.2°FWB
22°CWB71.6°FWB
20°CWB68°FWB
18°CWB64.4°FWB
16°CWB60.8°FWB
15°CWB59°FWB
1.2
1.3
1.1
0.9
0.8
0.7
0.6
1.0
Rat
io o
f h
eati
ng
cap
acit
y
15°CDB59°FDB
21.1°CDB70°FDB
25°CDB77°FDB
27°CDB80°FDB
15°CDB59°FDB
21.1°CDB70°FDB
25°CDB77°FDB
27°CDB80°FDB
Indoor Temperature
Ref:CbT_PURY-P108-144TGMU
NominalCoolingCapacity
Input
kW
BTU/h
kW
PURY- P108TGMU P126TGMU31.7
108,000
9.73
36.9
126,000
11.36
NominalCoolingCapacity
Input
kW
BTU/h
kW
PURY- P144TGMU42.2
144,000
14.20
NominalHeatingCapacity
Input
kW
BTU/h
kW
PURY- P108TGMU P126TGMU35.2
120,000
9.92
41.0
140,000
11.67
NominalHeatingCapacity
Input
kW
BTU/h
kW
PURY- P144TGMU46.9
160,000
13.67
R2-12OUTDOOR UNITS
R2
6. CAPACITY TABLES DATA U1
6-2. Correction by total indoorCITY MULTITM system has different capacity and input at different total capacity of indoor unit connected. Using following tables,
the maximum capacity can be observed so as to ensure the system having enough capacity.
Cap
acit
y(kW
)In
pu
t(kW
)
Total capacity of indoor units
10.0
20.0
30.0
40.0
50.0
0.0
5.0
0 50 100 150 200
Cap
acit
y(kW
)In
pu
t(kW
)
Total capacity of indoor units
10.0
20.0
30.0
40.0
50.0
0.0
5.0
10.0
0 50 100 150 200
Cooling
Heating
Cooling
Heating
Cooling
Heating
Cooling
Heating
P72 P96
PURY-P72,96TGMU
Ref: CbTI_PURY-P108-126TGMU
Ref: CbTI_PURY-P72-96TGMU
PURY-P108,126TGMU
P108 P126
PURY-P108TGMU
R2-13OUTDOOR UNITS
R2
6. CAPACITY TABLES DATA U1
20,000
30,000
40,000
50,000
60,000
70,000
80,000
90,000
100,000
110,000
120,000
130,000
140,000
150,000
160,000
170,000
50,000
60,000
70,000
80,000
90,000
100,000
110,000
120,000
130,000
140,000
150,000
160,000
170,000
Cap
acit
y(B
TU
/h)
Inp
ut(
kW)
Total capacity of indoor units
0.0
5.0
0 50 100 150 200
Cap
acit
y(B
TU
/h)
Inp
ut(
kW)
Total capacity of indoor units
0.0
5.0
10.0
0 50 100 150 200
10.0
Cooling
Heating
Cooling
Heating
Cooling
Heating
Cooling
Heating
P72 P96
PURY-P72,96TGMU
Ref: CbTI_PURY-P108-126TGMU
Ref: CbTI_PURY-P72-96TGMU
PURY-P108,126TGMU
P108 P126
PURY-P108TGMU
R2-14OUTDOOR UNITS
R2
6. CAPACITY TABLES DATA U1
6-3. Correction by refrigerant piping lengthCITY MULTITMsystem can extend the piping flexibly within its limitation for the actual situation. Yet, a decrease of cooling/heating
capacity could happen correspondently. Using following correction factor according to the equivalent length of the piping shown at
2-3-1 and 2-3-2, the capacity can be observed. 2-3-3 shows how to obtain the equivalent length of piping.
6-3-1. Heating capacity correction
6-3-2. How to obtain the equivalent length of piping
0.900 20 40 60 80 100 120 140 160
66 131 197 263 328 394 459 525
He
atin
g c
ap
acity c
orr
ectio
n f
acto
r
0.95
1.00
mft.
Piping equivalent length
PURY-P-TGMU
Ref.: CbRPL_PURY-P72-234TGMU_H
Ref.: EPL_TGMU
1 PUHY, PURY-P72TGMU
Equivalent length = (Actual piping length to the farthest indoor unit) + (0.35 x number of bent on the piping) m
+ (1.15 x number of bent on the piping) ft.
2 PUHY, PURY-P96,108TGMU
Equivalent length = (Actual piping length to the farthest indoor unit) + (0.42 x number of bent on the piping) m
+ (1.38 x number of bent on the piping) ft.
3 PUHY, PURY-P126TGMU
Equivalent length = (Actual piping length to the farthest indoor unit) + (0.47 x number of bent on the piping) m
+ (1.54 x number of bent on the piping) ft.
4 PUHY, PURY-P144,168,192,204,216,234TGMU
Equivalent length = (Actual piping length to the farthest indoor unit) + (0.50 x number of bent on the piping) m
+ (1.64 x number of bent on the piping) ft.
R2-15OUTDOOR UNITS
R2
6. CAPACITY TABLES DATA U1
6-4. Correction at frosting and defrostingDue to frosting at the outdoor heat exchanger and the automatical defrosting operation, the heating capacity of the outdoor unit
should be considered by multiplying the correction factor which shown in the table below.
6-5. Temp. range of running
Table of correction factor at frosting and defrosting
6
43
1.00
1.00
1.00
1.00
1.00
1.00
4
39
0.95
0.93
0.95
0.98
0.94
0.94
2
36
0.84
0.82
0.90
0.89
0.87
0.84
1
34
0.83
0.80
0.87
0.86
0.86
0.86
0
32
0.83
0.82
0.88
0.89
0.87
0.87
-2
28
0.87
0.86
0.89
0.90
0.88
0.88
-4
25
0.90
0.90
0.90
0.92
0.90
0.90
-6
21
0.95
0.90
0.95
0.95
0.90
0.90
-8
18
0.95
0.95
0.95
0.95
0.93
0.93
-10
14
0.95
0.95
0.95
0.95
0.93
0.93
Outdoor inlet air temp.
Outdoor inlet air temp.
PUHY,PURY-P72,96TGMU
PUHY,PURY-P108TGMU
PUHY,PURY-P126,144TGMU
PUHY,PURY-P168,192TGMU
PUHY,PURY-P204TGMU
PUHY,PURY-P216,234TGMU
CWB
FWB
Ref.: CaF_TGMU
30
25
20
15
10
5
-20 -15 -10 -5 0 5 10 15 20 25 30 35 40 45 50
-4 5 14 23 32 41 50 59 68 77 86 95 104 113 122
-4 5 14 23 32 41 50 59 68 77 86 95 104 113 122
Ind
oo
r te
mp
era
ture
Outdoor temperature
30
25
20
15
10
5
86
77
68
59
50
41
86
°CDB°FDB
°CWB°FWB
77
68
59
50
41
-20 -15 -10 -5 0 5 10 15 20 25 30 35 40 45 50
°CDB
°FDB
°FWB
°CWB
Ind
oo
r te
mp
era
ture
Outdoor temperature
• Cooling
• Heating
Ref.: tr-ygm-r2
Table of correction factor at frosting and defrosting
6
43
1.00
1.00
4
39
0.95
0.93
2
36
0.84
0.82
1
34
0.83
0.80
0
32
0.83
0.82
-2
28
0.87
0.86
-4
25
0.90
0.90
-6
21
0.95
0.90
-8
18
0.95
0.95
-10
14
0.95
0.95
Outdoor inlet air temp.
Outdoor inlet air temp.
PUHY,PURY-P72,96TGMU
PUHY,PURY-P108TGMU
CWB
FWB
Ref.: CaF_TGMU
R2-16OUTDOOR UNITS
R2
Y-1OUTDOOR UNITS
Y
Y SERIES DATA U1
OUTDOOR UNITS
I.Y SERIES
1. SPECIFICATIONS.................................................................................................................................................. Y- 3
2. EXTERNAL DIMENSIONS ..................................................................................................................................... Y- 8
3. ELECTRICAL WIRING DIAGRAMS ....................................................................................................................... Y-14
4. SOUND LEVELS .................................................................................................................................................... Y-16
5. REFRIGERANT CIRCUIT DIAGRAMS AND THERMAL SENSORS..................................................................... Y-18
6. CAPACITY TABLES............................................................................................................................................... Y-21
6-1. Correction by temperature .............................................................................................................................. Y-21
6-2. Correction by total indoor................................................................................................................................ Y-24
6-3. Correction by refrigerant piping length............................................................................................................ Y-30
6-4. Correction at frosting and defrosting............................................................................................................... Y-32
6-5. Temp. range of running .................................................................................................................................. Y-32
1. SPECIFICATIONS.....................................................................................................................................................Y-3
2. EXTERNAL DIMENSIONS........................................................................................................................................Y-5
3. ELECTRICAL WIRING DIAGRAMS..........................................................................................................................Y-7
4. SOUND LEVELS.......................................................................................................................................................Y-8
5. REFRIGERANT CIRCUIT DIAGRAMS AND THERMAL SENSORS........................................................................Y-9
6. CAPACITY TABLES.................................................................................................................................................Y-10
6-1. Correction by temperature ...............................................................................................................................Y-10
6-2. Correction by total indoor .................................................................................................................................Y-12
6-3. Correction by refrigerant piping length .............................................................................................................Y-14
6-4. Correction at frosting and defrosting ................................................................................................................Y-15
6-5. Temp. range of running ....................................................................................................................................Y-15
Y-SERIES
Y-2OUTDOOR UNITS
Y
DATA U1
I.Y SERIES
Heat pump: PUHY-P-TGMU-A(-BS)
Y Heat pump
Nominal cooling cap.*1
Nominal heating cap.*2
BTU/h
BTU/h
* Nominal conditions *1, *2 are referable at the Specification sheet.
18HP 20HP 22HP 24HP16HP10HP 12HP 14HP8HP
P72 P96
26HP
P234P108 P126 P144 P168 P192 P204 P216
80,000
72,000
108,000
96,000
120,000
108,000
140,000
126,000
160,000
144,000
188,000
168,000
216,000
192,000
228,000
204,000
248,000
216,000
268,000
234,000
CITY MULTI™ Y SERIES
OUTDOOR UNITS
Indoor unit
Header
Indoor unit
Indoor unit
Joint
Outdoor unit
-
Y-3OUTDOOR UNITS
Y
1. SPECIFICATIONS DATA U1
1. SPECIFICATIONS
Model PUHY-P72TGMU-A(-BS) PUHY-P96TGMU-A(-BS)
Power source 3-phase 3-wire 208-230 V 60Hz
Cooling capacity *1 BTU / h 72,000 96,000
(Nominal) *1 kW 21.1 28.1
Power input kW 6.48 8.67
Current input(208-230) A 19.9-18.0 26.7-24.1
COP (kW / kW) 3.25 3.24
Temp. range of Indoor 59 to 75 degFW.B. (15 to 24 degCW.B.)
cooling Outdoor 23 to 109 degFD.B. (-5 to 43 degCD.B.)
32 to 109 degFD.B. ( 0 to 43degCD.B. ) Outdoor unit below Indoor unit
Heating capacity *2 BTU / h 80,000 108,000
(Nominal) *2 kW 23.4 31.7
Power input kW 6.33 8.56
Current input(208-230) A 19.5-17.6 26.4-23.8
COP (kW / kW) 3.69 3.70
Temp. range of Indoor 59 to 81 degFD.B. (15 to 27 degCD.B.)
heating Outdoor -4 to 60 degFW.B. (-20 to 15.5 degCW.B.)
Indoor unit Total capacity 50-130% of outdoor unit capacity 50-130% of outdoor unit capacity
connectable Model / Quantity P06-P96 / 1-13 P06-P96 / 1-16
Noise level (measured in anechoic room) dB <A> 56 57
Diameter of Liquid (High press.)in. (mm)
3/8 (9.52) Flare 3/8 (9.52) Flare
refrigerant pipe (1/2 (12.7) total length>=295ft.(90m))
(O.D.) Gas (Low press.) in. (mm) 3/4 (19.05) Brazed + Flare 7/8 (22.2) Brazed
External finish Pre-coated galvanized sheets(+powder coating for -BS type)
<MUNSELL 5Y 8/1 or similar>
External dimension H x W x D in. 72-15/32 x 39 x 33-3/32 72-15/32 x 39 x 33-3/32
mm 1,840 x 990 x 840 1,840 x 990 x 840
Net weight lbs(kg) 490 (222) 524 (237)
Heat exchanger Salt-resistant cross fin & copper tube Salt-resistant cross fin & copper tube
Compressor Type Inverter scroll hermetic comp. Inverter scroll hermetic comp.
Manufacturer AC&R Works,MITSUBISHI ELECTRIC CORPORATION
Starting method Inverter Inverter
Motor output kW 4.7 6.7
Case heater kW 0.057(230V) 0.057(230V)
Lubricant MEL32 MEL32
FAN Airflow rate cfm 7,050 7,050
m3 / min 200 200
L / s 3,333 3,333
External static press. in.WG(Pa) 0 (0) 0 (0)
Type x Quantity Propeller fan x 1 Propeller fan x 1
Control, Driving mechanism Inverter-control , Direct-driven Inverter-control , Direct-driven
Motor output kW 0.38 x 1 0.38 x 1
HIC circuit (HIC: Heat Inter-Changer) Copper pipe,pipe-in-pipe structure
Protection High pressure protection High pressure sensor, High pressure switch 601 psi (4.15 MPa)
Inverter circuit (COMP., FAN) Over-current protection,Over-heat protection
Compressor Over-heat protection
Fan motor Thermal switch
Defrosting method Auto-defrost mode (Reversed refrigerant circle)
Refrigerant Type x Original charge lbs + oz (kg) R410A x (15 lbs + 7 oz) (7.0kg) R410A x (20 lbs + 16 oz) (9.5kg)
Control indoor LEV and HIC circuit
Drawing External W659658
Wiring W274649
Refrigerant cycle -
Standard Document Installation Manual Installation Manual
attachment Accessory Details refer to External Drw W659658 Details refer to External Drw W659658
Optional parts High static pressure motor : PAC-KBU04MT-U-F High static pressure motor : PAC-KBU04MT-U-F
Joint : CMY-Y102S-G Joint : CMY-Y102S-G,CMY-Y102L-G1
Header:CMY-Y104/108/1010-G Header:CMY-Y104/108/1010-G
Remark Details on foundation work,duct work,insulation work,electrical wiring,power source switch,and other items shall be re-
ferred to the Installation Manual.
Note : *1 Nominal cooling conditions *2 Nominal heating conditions Unit converter
Indoor : 80degF D.B. / 67degF W.B. 70degF D.B. kcal/h = kW x 860
(26.7degC D.B. / 19.4degC W.B.) (21.1degC D.B.) BTU/h = kW x 3,412
Outdoor : 95degF D.B. 47degF D.B. / 43degF W.B. cfm = m3/min x 35.31
(35degC D.B.) (8.3degC D.B. / 6.1degC W.B.) lbs = kg / 0.4536
Pipe length : 25 ft. (7.6 m) 25 ft. (7.6 m)
Level difference : 0 ft. (0 m) 0 ft. (0 m) *Above specification data is
subject to rounding variation.
*Due to continuing improvement, above specification may be subject to change without notice.
Ref.: Spec_PUHY-P72-96TGMU
Y-4OUTDOOR UNITS
Y
1. SPECIFICATIONS DATA U1
Model PUHY-P108TGMU-A(-BS) PUHY-P126TGMU-A(-BS)
Power source 3-phase 3-wire 208-230 V 60Hz
Cooling capacity *1 BTU / h 108,000 126,000
(Nominal) *1 kW 31.7 36.9
Power input kW 9.73 11.36
Current input(208-230) A 30.0-27.1 35.0-31.6
COP (kW / kW) 3.25 3.24
Temp. range of Indoor 59 to 75 degFW.B. (15 to 24 degCW.B.)
cooling Outdoor 23 to 109 degFD.B. (-5 to 43 degCD.B.)
32 to 109 degFD.B. ( 0 to 43degCD.B. ) Outdoor unit below Indoor unit
Heating capacity *2 BTU / h 120,000 140,000
(Nominal) *2 kW 35.2 41.0
Power input kW 9.92 11.67
Current input(208-230) A 30.6-27.6 36.0-32.5
COP (kW / kW) 3.54 3.51
Temp. range of Indoor 59 to 81 degFD.B. (15 to 27 degCD.B.)
heating Outdoor -4 to 60 degFW.B. (-20 to 15.5 degCW.B.)
Indoor unit Total capacity 50-130% of outdoor unit capacity 50-130% of outdoor unit capacity
connectable Model / Quantity P06-P96 / 1-19 P06-P96 / 1-20
Noise level (measured in anechoic room) dB <A> 60 61
Diameter of Liquid (High press.)in. (mm)
3/8 (9.52) Flare 1/2 (12.7) Flare
refrigerant pipe (1/2 (12.7) total length>=131ft.(40m))
(O.D.) Gas (Low press.) in. (mm) 7/8 (22.2) Brazed 1-1/8 (28.58) Brazed
External finish Pre-coated galvanized sheets(+powder coating for -BS type)
<MUNSELL 5Y 8/1 or similar>
External dimension H x W x D in. 72-15/32 x 39 x 33-3/32 72-15/32 x 50-13/16 x 33-3/32
mm 1,840 x 990 x 840 1,840 x 1,290 x 840
Net weight lbs(kg) 524 (237) 616 (279)
Heat exchanger Salt-resistant cross fin & copper tube Salt-resistant cross fin & copper tube
Compressor Type Inverter scroll hermetic comp. Inverter scroll hermetic comp.
Manufacturer AC&R Works,MITSUBISHI ELECTRIC CORPORATION
Starting method Inverter Inverter
Motor output kW 8.0 8.5
Case heater kW 0.057(230V) 0.057(230V)
Lubricant MEL32 MEL32
FAN Airflow rate cfm 7,050 8,450
m3 / min 200 240
L / s 3,333 4,000
External static press. in.WG(Pa) 0 (0) 0 (0)
Type x Quantity Propeller fan x 1 Propeller fan x 1
Control, Driving mechanism Inverter-control , Direct-driven Inverter-control , Direct-driven
Motor output kW 0.38 x 1 0.64 x 1
HIC circuit (HIC: Heat Inter-Changer) Copper pipe,pipe-in-pipe structure
Protection High pressure protection High pressure sensor, High pressure switch 601 psi (4.15 MPa)
Inverter circuit (COMP. , FAN) Over-current protection,Over-heat protection
Compressor Over-heat protection
Fan motor Thermal switch
Defrosting method Auto-defrost mode (Reversed refrigerant circle)
Refrigerant Type x Original charge lbs + oz (kg) R410A x (20 lbs + 16 oz) (9.5kg) R410A x (28 lbs + 11 oz) (13.0kg)
Control indoor LEV and HIC circuit
Drawing External W659658 W659659
Wiring W274649 W274649
Refrigerant cycle - -
Standard Document Installation Manual Installation Manual
attachment Accessory Details refer to External Drw W659658 Details refer to External Drw W659659
Optional parts High static pressure motor : PAC-KBU04MT-U-F
Joint : CMY-Y102S-G,CMY-Y102L-G1
Header:CMY-Y104/108/1010-G
Remark Details on foundation work,duct work,insulation work,electrical wiring,power source switch,and other items shall be re-
ferred to the Installation Manual.
Note : *1 Nominal cooling conditions *2 Nominal heating conditions Unit converter
Indoor : 80degF D.B. / 67degF W.B. 70degF D.B. kcal/h = kW x 860
(26.7degC D.B. / 19.4degC W.B.) (21.1degC D.B.) BTU/h = kW x 3,412
Outdoor : 95degF D.B. 47degF D.B. / 43degF W.B. cfm = m3/min x 35.31
(35degC D.B.) (8.3degC D.B. / 6.1degC W.B.) lbs = kg / 0.4536
Pipe length : 25 ft. (7.6 m) 25 ft. (7.6 m)
Level difference : 0 ft. (0 m) 0 ft. (0 m) *Above specification data is
subject to rounding variation.
*Due to continuing improvement, above specification may be subject to change without notice.
Ref.: Spec_PUHY-P108-126TGMU
Y-5OUTDOOR UNITS
Y
2. EXTERNAL DIMENSIONS DATA U1
2. EXTERNAL DIMENSIONS
PUHY-P72,96,108TGMU-A(-BS) Drw. : PUHY-TGMU_W659658 1/2
Unit : mm(in)
(Mo
un
tin
g h
ole
)
Air o
utlet
Air
inle
t
Air
inle
t
<H
ole
for
pow
er
supply
>
attached c
onduit m
ounting p
late
<A
ccessory
>
<B
ottom
hole
for
contr
ol w
irin
g>
Knockout hole
<B
ottom
pip
ing h
ole
>
Left s
ide v
iew
<L
eft
sid
e h
ole
fo
r c
on
tro
l w
irin
g>
Kn
ocko
ut
ho
le<
Le
ft p
ipin
g h
ole
>
<A
cce
sso
rie
s>
(P
72
typ
e:P
acka
ge
d in
th
e a
cce
sso
ry k
it)
(P
96
,P1
08
typ
e:A
lre
ad
y in
sta
lled
on
th
e u
nit)
(P
72
typ
e:N
ot
att
ach
ed
)
(P9
6,P
10
8ty
pe
:Att
ach
ed
ne
ar
the
ba
ll va
lve
)
Cro
ss s
ection Y
-Y
Cro
ss s
ection X
-X
2X
2-1
4(9
/16
)X2
0(1
3/1
6)
0va
l ho
le
Top v
iew
Fro
nt vie
w
Kn
ocko
ut
ho
le
Se
rvic
e p
an
el
Re
frig
. se
rvic
e
va
lve
(L
iqu
id)
<F
lare
>
Re
frig
. se
rvic
eva
lve
(Ga
s)
<F
lan
ge
>
Kn
ocko
ut
ho
le<
Fro
nt
pip
ing
h
ole
>
13
6(5
-3/8
)
13
6(5
-3/8
)
13
2(5
-7/3
2)
A
72
Mo
de
l
96
10
8
Co
nn
. p
ipe
(Liq
uid
)
Co
nn
. p
ipe
(Ga
s)
(6-5
/16)
(2-2
1/3
2)
(21/32)(10-7/16)
(72-15/32)
(62-1/32)
(3-3/32) (7/16)
(3-9
/32)
(2-2
1/3
2)
(8-5
/32)
(8-5
/32)
(2-2
1/3
2)
(3-1
5/1
6)
(1-3/4) (5-29/32)
(9-9/32)
(34-17/32)
(21/32)(33-9/32)
(33-3/32)
(35-7
/16)
(39)
(1-2
5/3
2)
(1-2
5/3
2)
(11-1/32)
(3-15/16) (5-9/32)
(1-1
9/3
2)
(3-5
/32)(5
-11/3
2)
(1-1
5/3
2)
(4-5
/8)
(3-9/16)
(1-1
5/3
2)
(13/32)
(4-5
/8)
(1/2
) 12
(2-3/32)
(21-25/32)
(13/16) (2-25/32)
(3-5
/32)
(30-1
/4)
(6-5
/16)
(6-9/16)
(2-1/4)
(2-9
/16)
(3-5/32)
(19-1
5/3
2)
No
te1
.Use
th
e o
pe
nin
g a
t th
e b
ott
om
of
the
un
it
wh
en
ru
nn
ing
th
e p
ow
er
su
pp
ly lin
e f
rom
th
e f
ron
t o
r fr
om
th
e s
ide
of
the
un
it.
No
te2
.Ple
ase
re
fer
to t
he
ne
xt
pa
ge
fo
r in
form
atio
n
reg
ard
ing
ne
ce
ssa
ry s
pa
cin
g a
rou
nd
th
e
un
it a
nd
fo
un
da
tio
n w
ork
.
166
83
100
15044
YY 53
5(7
/32)
20 70
80
100
90 10
40
80
135
280
134
553
494
80 57
160
65
768
37
117
117
37
A
1575
1840
11
235
160
67
990
16
840
67
207
207
67
78
XX
877
845(mounting pitch) 16
45
900(m
ounting p
itch)
45
265
Y-6OUTDOOR UNITS
Y
2. EXTERNAL DIMENSIONS DATA U1
Spacing PUHY-P72,96,108TGMU-A(-BS) Drw. : PUHY-TGMU_W659658 2/2
Unit : mm(in)
Wa
ll h
eig
ht
<H
>
AA
B B
B
B
AA
AA
A
450100
10
00
10
00
10
00
10
00
900250
900
45
02
50
45
04
50
45
04
50
45
04
50
**
*
*
In c
ase
of
co
llective
in
sta
llatio
n a
nd
co
ntin
uo
us in
sta
llatio
n
Wa
ll h
eig
ht
<H
>
Wa
ll h
eig
ht
<H
>
Wa
ll h
eig
ht
<H
>
M1
0 A
nch
or
Bo
lt
<L
oca
l su
pp
ly>
Co
rne
r
Fro
nt
Mu
st
be
op
en
A B
h=
wa
ll h
eig
ht
<H
'> -
to
tal h
eig
ht
of
un
it.
[
Ba
sic
ru
les f
or
sp
acin
g t
he
un
it]
2.F
ou
nd
atio
n w
ork
[Wh
en
in
let
air e
nte
rs f
rom
rig
ht
an
d le
ft s
ide
s o
f u
nit]
1.S
pa
ce
re
qu
ire
d a
rou
nd
un
it
In c
ase
of
sin
gle
in
sta
llatio
n
(3-15/16) (17-23/32)
(9-27/32)(35-7/16)
(39
-3/8
)
(39
-3/8
)(3
9-3
/8)
(39
-3/8
)
(17
-23
/32
)
(17-2
3/3
2)
(17-2
3/3
2)(
17-2
3/3
2)(
17-2
3/3
2)(
17-2
3/3
2)
(9-2
7/3
2)
(17
-23
/32
)
450100
45
01
00
<S
ide
vie
w>
No
re
str
ictio
ns o
n w
all
he
igh
t
<
left
an
d r
igh
t>
AA
H' H
Hh
(3-15/16) (17-23/32)
(3-1
5/1
6)
(17
-23
/32
)
Wa
ll h
eig
ht<
H>
Wa
ll h
eig
ht<
H>
No
re
str
ictio
ns o
n w
all
he
igh
t
Wa
ll h
eig
ht<
H>
(17-23/32)(9-27/32)(9-27/32) (9-27/32)(35-7/16)
250 250450
<T
op
vie
w>
F
ron
t
250
AA A
A
AA
A
B BB
B
Y-7OUTDOOR UNITS
Y
3. ELECTRICAL WIRING DIAGRAMS DATA U1
3. ELECTRICAL WIRING DIAGRAMS
*1
*1
*2
*2
*3
*4
*4
L3
L1
L2
red
black
SH
OR
T
OP
EN
redwhiteblack
P126/1
44
GG
G
GInvert
er
contr
olle
r box
X*4
X
bypa
ss o
utle
t tem
p.de
tect
at S
ub-c
ool coil
TH
8
Ele
ctr
onic
expansio
n v
alu
e
(SC
coil)
LE
V1
DC
LD
C r
eacto
r
(Pow
er
facto
r im
pro
vem
ent)
Z20
Function d
evic
e
SV
5b
Sole
noid
valv
e
(Heat exchanger
capacity c
ontr
ol)
TH
7
TH
6
TH
5
21S
4a,b
SV
1
CH
11
MF
1
DC
CT
Gro
und term
inal
liqui
d ou
tlet t
emp.
dete
ct
at S
ub-c
ool coil
Pip
e te
mp.
dete
ct(H
ex o
utle
t)
OA
tem
p. dete
ct
Sole
noid
valv
e
(Dis
charg
e-s
uction b
ypass)
4-w
ay v
alv
e
Cra
nk c
ase h
eate
r(C
om
pre
ssor)
DC
Curr
ent S
ensor
Choke c
oil(
Tra
nsm
issio
n)
63LS
L1,L
2
63H
S
TB
1,3
,7
TH
11
63H
1
52C
Term
inal blo
ck D
isch
arge
pip
e te
mp.
det
ect
Hig
h p
ressure
sw
itch
Rela
y(I
nvert
er
main
circuit)
AC
CT
AC
Curr
ent S
ensor
*1 T
he b
roken lin
es indic
ate
fie
ld w
irin
g.
*2 F
unction a
ccord
ing to s
witch o
pera
tion.
(S
W4-7
,CN
3D
1-2
P,a
nd C
N3D
1-3
P)
TH
HS
1,5
Rad
iato
r pa
nel t
emp.
det
ect
Moto
r F
an R
adia
tor
panel
Therm
isto
r
Hig
h p
ressure
sensor
Low
pre
ssure
sensor
CN
3D
1-3
P
*3
SW
4-7:
OF
F (
Com
pres
sor
ON
/OF
F a
nd N
IGH
T M
OD
E)
ON
OF
F
CN
3D
1-2
P
NIG
HT
MO
DE
SW
4-7
:ON
(S
TE
P D
EM
AN
D)
ON
OF
F
SH
OR
T
OP
EN
Com
pre
ssor
ON
/OF
F
50%
75%
0%
100%
CN
3D
1-3
P
CN
3D
1-2
P
SH
OR
T
OP
EN
OP
EN
SH
OR
T
Sym
bol
Nam
e
P72/9
6/1
08
Model
:e
xis
t X
:not exis
t
<S
ym
bol expla
nation>
, G
<D
iffe
rence o
f applia
nce>
G
redwhiteblack
de
tectio
n c
ircuit
black
white
green
red
black
red
L3
L1
Co
mp
resso
r O
N/O
FF
Shie
ld
T
(Tra
nsfo
rmer)
321
32
WV
Co
mp
resso
r O
N/O
FF
Tro
ub
le
1 2 3 4 5
CN
51
12V
or
ST
EP
DE
MA
ND
L3
L2
21
3
de
tectio
n c
ircu
it
LD
2
DS
AZ
NR
1~
4
X01
F01
250V
AC
3.1
5A
T
F01
250V
AC
15A
T
CH
11
21
S 4
b
21S
4a
63H
1
SV
5b
SV
1
LE
V1
52C
MF
1
MF
L2
L3
L1
G
FN
1R
1
52C
FN
2
FN
3
FN
4
FN
5
N
F
(Nois
e F
ilter)
C1
G
12
12
12
CN
L2
CN
L1
L2
L1
R2 red
CN
30V
gre
en
CN
TH
TH
HS
5
1 2
bla
ck
red
red
white
bla
ck
red
bla
ck
LE
D1
op
era
tio
n
LE
D2
err
or
1
4 O
N
OFF
SW
2
SW
1S
W2
SW
3S
W4
LD
1
ONOF
F
SW
5
1
Co
ntr
ol circu
it b
oa
rd
10
SW
U2
SW
U1
DC
CT
Gate
am
p b
oard
FA
N c
ontr
ol board
SW
U3
012
SW
2S
W1
1
4
1
6 O
N
OF
FLE
D1
op
era
tio
n
LE
D2
err
or
LE
D3
ch
arg
e
Pow
er
circuit b
oard
M2
M1
M1
M2
S
43
21
2
12321
12
34
67
18
76
43
55
2
SN
OW
Un
it a
dd
ress s
ett
ing
21419
314
11
1
4
14
1
43
21
871
12
34
61
3
32
14
32
15
32
12
32
1
9 6543211 1 32321
32
13
213
21
32
11
22
31
24
321321
6
F01
250V
AC
2A
T
CN
AC
2
CN
CT
71
85
21
1
1
2
3
71
1123 1
T
B1
(Term
inal B
lock)
D
S(D
iode s
tack)
TB
3
CN
DC
1yello
w
CN
15V
1
CN
DR
1
CN
DC
2
AC
CT
-W
AC
CT
-U
AC
CT
CN
DR
2
CN
15V
2
TH
HS
1gre
en
CN
TH
CN
FG
blu
e
CN
DC
2yello
w
CN
CT
2blu
eC
NV
CC
1
CN
FA
N r
ed
CN
RS
1
CN
41
CN
INV
ON
OF
F
CN
21
blu
e
CN
S1
blu
e
CN
20
F02
250V
AC
6.3
A T
CN
40
F01
250V
AC
6.3
A T
CN
VD
C
CN
S2
blu
e
CN
RS
3B
CN
VC
C1
CN
RS
3A
CN
3S
red
CN
3D
10
1
10
1
10
1
10
1ON
OFF
ONOF
FON
OFF
ONOF
F
CN
52C
yello
w
CN
32
CN
33
CN
36
CN
35
red
CN
38
gre
en
CN
TY
P5
CN
TY
P4
R23
R22
CN
H C
NL
bla
ck
CN
01
CN
02
63
LS
TH
11
TH
5T
H6
CN
TY
P1
red
TB
7
Indoor/
outd
oor
tra
nsm
issi
on
lin
e
Ce
ntr
al c
on
tro
l
tra
nsm
issi
on
lin
e
3
M
oto
r(C
om
pre
sso
r)
Function s
ettin
g
7
4
CN
TRCN
RS
2
2
TH
76
3H
ST
H8
1
Z2
0
Function s
ettin
g
3
NIG
HT
MO
DE
9
1
1
Shie
ld
F
an
mo
tor
(He
at
exch
an
ge
r)
L1
Function
settin
g
bla
ck
white
X02
X01
X09
X08
X03
DC
L
N
IPM
P
C4
MC
V
X52
U V
W
C5
ZN
R4
U W
1
red
1
2 31
54
32
12
3
1
Gro
un
d
Pow
er s
ourc
e
3~ 208/
230V
60H
z
bla
ck
CN
AC
3
CN
04
12
34
56
CN
LV
B r
ed
U
PUHY-P72,96,108,126,144TGMU-A(-BS) Drw. :PUHY-TGMU_W274649PUHY-P72,96,108TGMU-A(-BS)
Y-8OUTDOOR UNITS
Y
4. SOUND LEVELS DATA U1
4. SOUND LEVELS
Measurement
location
3-1/4ft.
(1m)
3-1
/4ft.
(1m
)
Measurement condition
PUHY-P72,96,108,126,144TGMU-A(-BS)
63 125 250 500 1k 2k 4k 8k dB(A)
Standard 60Hz 63.0 64.0 57.5 55.0 50.5 50.5 54.0 50.0 60.0
Night Mode 60Hz 64.0 55.0 48.5 46.5 42.5 43.0 41.5 40.0 51.0When Night Mode is set,the A/C system's capacity is limited. The system could return to normal operation fromNight Mode automatically in the case that the operation condition is severe.
10
20
30
40
50
60
70
80
90
63 125 250 500 1k 2k 4k 8k
NC-40
NC-30
NC-20
NC-60
NC-50
NC-70
Octave band central frequency (Hz)
Octa
ve
ba
nd
so
un
d le
ve
l (d
B)
Approximate minimum
audible limit on
continuous noise
Stand 60Hz
Night 60Hz
Sound level of PUHY-P108TGMU-A(-BS) Ref.:NC_PUHY-P108TGMU_WYNB0-4263
63 125 250 500 1k 2k 4k 8k dB(A)
Standard 60Hz 61.5 57.5 54.5 52.5 49.0 48.0 48.0 42.5 56.0
Night Mode 60Hz 61.0 54.5 50.0 46.0 41.5 39.5 37.0 38.0 49.0When Night Mode is set,the A/C system's capacity is limited. The system could return to normal operation fromNight Mode automatically in the case that the operation condition is severe.
10
20
30
40
50
60
70
80
90
63 125 250 500 1k 2k 4k 8k
NC-40
NC-30
NC-20
NC-60
NC-50
NC-70
Octave band central frequency (Hz)
Octa
ve b
and s
ound level (d
B)
Approximate minimum
audible limit on
continuous noise
Stand 60Hz
Night 60Hz
Sound level of PUHY-P72TGMU-A(-BS) Ref.:NC_PUHY-P72TGMU_WYNB0-4261
63 125 250 500 1k 2k 4k 8k dB(A)
Standard 60Hz 67.5 68.5 60.5 58.5 54.5 50.5 48.0 42.5 61.0
Night Mode 60Hz 64.0 55.0 48.5 46.5 44.5 45.0 43.5 42.0 52.0When Night Mode is set,the A/C system's capacity is limited. The system could return to normal operation fromNight Mode automatically in the case that the operation condition is severe.
10
20
30
40
50
60
70
80
90
NC-40
NC-30
NC-20
NC-60
NC-50
NC-70
Octave band central frequency (Hz)
Octa
ve
ba
nd
so
un
d le
ve
l (d
B)
Approximate minimum
audible limit on
continuous noise
Stand 60Hz
Night 60Hz
Sound level of PUHY-P126TGMU-A(-BS) Ref.:NC_PUHY-P126TGMU_WYNB0-4264
63 125 250 500 1k 2k 4k 8k
Measurement conditionPUHY-P72,96,108TGMU-A(-BS)
63 125 250 500 1k 2k 4k 8k dB(A)
Standard 60Hz 62.5 58.5 55.5 53.0 49.5 49.0 49.0 43.0 57.0
Night Mode 60Hz 60.0 56.5 50.0 45.5 41.0 38.5 38.0 39.0 49.0When Night Mode is set,the A/C system's capacity is limited. The system could return to normal operation fromNight Mode automatically in the case that the operation condition is severe.
10
20
30
40
50
60
70
80
90
63 125 250 500 1k 2k 4k 8k
NC-40
NC-30
NC-20
NC-60
NC-50
NC-70
Octave band central frequency (Hz)
Octa
ve
ba
nd
so
un
d le
ve
l (d
B)
Approximate minimum
audible limit on
continuous noise
Stand 60Hz
Night 60Hz
Sound level of PUHY-P96TGMU-A(-BS) Ref.:NC_PUHY-P96TGMU_WYNB0-4262
Y-9OUTDOOR UNITS
Y
5. REFRIGERANT CIRCUIT DIAGRAMS AND THERMAL SENSORS DATA U1
5. REFRIGERANT CIRCUIT DIAGRAMS AND THERMAL SENSORS
TH
7
TH
8
TH
5
HE
X B
SC
CL
EV
1
ST
4
BV
1S
T1
TH
6
HE
X F
BV
2S
T2
TH
1
O/S
CP
1
SV
1
AC
C
Co
mp
63
H
21
S4
a
63
LS
ST
3
ST
6
CJ1
63
HS
CJ2
ST
7
Fu
sib
le
Plu
g
PUHY-P72,96,108TGMU-A(-BS) Drw. : RC_PUHY-P72-108TGMU
Y-10OUTDOOR UNITS
Y
6. CAPACITY TABLES DATA U1
6. CAPACITY TABLES
6-1. Correction by temperatureCITY MULTITM could have varied capacity at different designing temperature. Using the nominal cooling/heating capacity value
and the ratio below , the capacity can be observed at various temperature.
Ratio of cooling capacity and power input Outdoor temperature
Ratio of heating capacity and power input Outdoor temperature
-5 0 5 10 15 20 25 30 35 40 4523 32 41 50 59 68 77 86 95 104 113
°CDB°FDB
1.3
1.1
1.2
1.0
0.9
0.8
0.7
Ra
tio
of
po
we
r in
pu
t
-20-4
-155
-1014
-523
032
541
1050
1559
°CWB°FWB
0.6
0.9
1.0
1.1
0.8
0.7
0.6
0.5
Ra
tio
of
po
we
r in
pu
t
1.3
1.2
1.0
0.9
0.8
0.7
0.6
1.1
Ra
tio
of
co
oli
ng
ca
pa
cit
y
Indoor Temperature
24°CWB75.2°FWB
22°CWB71.6°FWB
20°CWB68°FWB
18°CWB64.4°FWB
16°CWB60.8°FWB
15°CWB59°FWB
24°CWB75.2°FWB
22°CWB71.6°FWB
20°CWB68°FWB
18°CWB64.4°FWB
16°CWB60.8°FWB
15°CWB59°FWB
1.3
1.4
1.2
1.0
0.9
0.8
0.7
1.1
Ra
tio
of
he
ati
ng
ca
pa
cit
y
15°CDB59°FDB
21.1°CDB70°FDB
25°CDB77°FDB
27°CDB80°FDB
15°CDB59°FDB
21.1°CDB70°FDB
25°CDB77°FDB
27°CDB80°FDB
Indoor Temperature
NominalCoolingCapacity
Input
kW
BTU/h
kW
NominalHeatingCapacity
Input
kW
BTU/h
kW
PUHY- P72TGMU P96TGMU
PUHY- P72TGMU P96TGMU
Ref:CbT_PUHY-P72-96TGMU
21.1
72,000
6.48
28.1
96,000
8.67
23.4
80,000
6.33
31.7
108,000
8.56
Y-11OUTDOOR UNITS
Y
6. CAPACITY TABLES DATA U1
Ratio of cooling capacity and power input Outdoor temperature
Ratio of heating capacity and power input Outdoor temperature
-5 0 5 10 15 20 25 30 35 40 4523 32 41 50 59 68 77 86 95 104 113
°CDB°FDB
1.2
1.3
1.0
1.1
0.9
0.8
0.7
0.6
Ra
tio
of
po
we
r in
pu
t
-20-4
-155
-1014
-523
032
541
1050
1559
°CWB°FWB
0.8
0.9
1.0
1.1
0.7
0.6
0.5
0.4
Ra
tio
of
po
we
r in
pu
t
1.4
1.3
1.1
1.0
0.9
0.8
1.2
Ra
tio
of
co
oli
ng
ca
pa
cit
y
Indoor Temperature
24°CWB75.2°FWB
22°CWB71.6°FWB
20°CWB68°FWB
18°CWB64.4°FWB
16°CWB60.8°FWB
15°CWB59°FWB
24°CWB75.2°FWB
22°CWB71.6°FWB
20°CWB68°FWB
18°CWB64.4°FWB
16°CWB60.8°FWB
15°CWB59°FWB
1.2
1.3
1.1
0.9
0.8
0.7
0.6
1.0
Ra
tio
of
he
ati
ng
ca
pa
cit
y
15°CDB59°FDB
21.1°CDB70°FDB
25°CDB77°FDB
27°CDB80°FDB
15°CDB59°FDB
21.1°CDB70°FDB
25°CDB77°FDB
27°CDB80°FDB
Indoor Temperature
Ref:CbT_PUHY-P108-144TGMU
NominalCoolingCapacity
Input
kW
BTU/h
kW
PUHY- P108TGMU P126TGMU
31.7
108,000
9.73
36.9
126,000
11.36
NominalCoolingCapacity
Input
kW
BTU/h
kW
PUHY- P144TGMU
42.2
144,000
14.20
NominalHeatingCapacity
Input
kW
BTU/h
kW
PUHY- P108TGMU P126TGMU
35.2
120,000
9.92
41.0
140,000
11.67
NominalHeatingCapacity
Input
kW
BTU/h
kW
PUHY- P144TGMU
46.9
160,000
13.67
Y-12OUTDOOR UNITS
Y
6. CAPACITY TABLES DATA U1
6-2. Correction by total indoorCITY MULTITM system has different capacity and input at different total capacity of indoor unit connected. Using following tables,
the maximum capacity can be observed so as to ensure the system having enough capacity.
Cap
acit
y(k
W)
Inp
ut(
kW
)
Total capacity of indoor units
10.0
20.0
30.0
40.0
50.0
0.0
5.0
0 50 100 150 200
Cap
acit
y(k
W)
Inp
ut(
kW
)
Total capacity of indoor units
10.0
20.0
30.0
40.0
50.0
0.0
5.0
10.0
0 50 100 150 200
Cooling
Heating
Cooling
Heating
P108 P126
Cooling
Heating
Cooling
Heating
P72 P96
PUHY-P72,96TGMU
Ref: CbTI_PUHY-P108-126TGMU
Ref: CbTI_PUHY-P72-96TGMU
PUHY-P108,126TGMUPUHY-P108TGMU
Y-13OUTDOOR UNITS
Y
6. CAPACITY TABLES DATA U1
20,000
30,000
40,000
50,000
60,000
70,000
80,000
90,000
100,000
110,000
120,000
130,000
140,000
150,000
160,000
170,000
50,000
60,000
70,000
80,000
90,000
100,000
110,000
120,000
130,000
140,000
150,000
160,000
170,000
Cap
acit
y(B
TU
/h)
Inp
ut(
kW
)
Total capacity of indoor units
0.0
5.0
0 50 100 150 200
Cap
acit
y(B
TU
/h)
Inp
ut(
kW
)
Total capacity of indoor units
0.0
5.0
10.0
0 50 100 150 200
Cooling
Heating
Cooling
Heating
P108 P126
10.0
Cooling
Heating
Cooling
Heating
P72 P96
PUHY-P72,96TGMU
Ref: CbTI_PUHY-P108-126TGMU
Ref: CbTI_PUHY-P72-96TGMU
PUHY-P108,126TGMUPUHY-P108TGMU
Y-14OUTDOOR UNITS
Y
6. CAPACITY TABLES DATA U1
6-3. Correction by refrigerant piping lengthCITY MULTITMsystem can extend the piping flexibly within its limitation for the actual situation. Yet, a decrease of cooling/heating
capacity could happen correspondently. Using following correction factor according to the equivalent length of the piping shown at
2-3-1 and 2-3-2, the capacity can be observed. 2-3-3 shows how to obtain the equivalent length of piping.
6-3-1. Cooling capacity correction
200 40 60 80 100 120 140 16066 131 197 263 328 394 459 525
mft.
Piping equivalent length
1
0.9
0.8
0.95
0.85
0.75
0.65
0.7
Co
olin
g c
ap
acity c
orr
ectio
n f
acto
r
PUHY-P72TGMU
Ref.: CbRPL_PUHY-P72TGMU_C
7293
54
36
Total capacity of indoor unit
200 40 60 80 100 120 140 16066 131 197 263 328 394 459 525
mft.
Piping equivalent length
1
0.9
0.8
0.95
0.85
0.75
0.65
0.7
Co
olin
g c
ap
acity c
orr
ectio
n f
acto
r
PUHY-P144TGMU
Ref.: CbRPL_PUHY-P144TGMU_C
144187
10872
Total capacity of indoor unit
200 40 60 80 100 120 140 16066 131 197 263 328 394 459 525
mft.
Piping equivalent length
1
0.9
0.8
0.95
0.85
0.75
0.65
0.7
Co
olin
g c
ap
acity c
orr
ectio
n f
acto
r
PUHY-P96TGMU
Ref.: CbRPL_PUHY-P96TGMU_C
96124
7248
Total capacity of indoor unit
200 40 60 80 100 120 140 16066 131 197 263 328 394 459 525
mft.
Piping equivalent length
1
0.9
0.8
0.95
0.85
0.75
0.65
0.7
Co
olin
g c
ap
acity c
orr
ectio
n f
acto
r
PUHY-P168TGMU
Ref.: CbRPL_PUHY-P168TGMU_C
168218
12684
Total capacity of indoor unit
200 40 60 80 100 120 140 16066 131 197 263 328 394 459 525
mft.
Piping equivalent length
1
0.9
0.8
0.95
0.85
0.75
0.65
0.7
Co
olin
g c
ap
acity c
orr
ectio
n f
acto
r
PUHY-P108TGMU
Ref.: CbRPL_PUHY-P108TGMU_C
108140
81
54
Total capacity of indoor unit
200 40 60 80 100 120 140 16066 131 197 263 328 394 459 525
mft.
Piping equivalent length
1
0.9
0.8
0.95
0.85
0.75
0.65
0.7
Co
olin
g c
ap
acity c
orr
ectio
n f
acto
r
PUHY-P192TGMU
Ref.: CbRPL_PUHY-P192TGMU_C
192249
14496
Total capacity of indoor unit
200 40 60 80 100 120 140 16066 131 197 263 328 394 459 525
mft.
Piping equivalent length
1
0.9
0.8
0.95
0.85
0.75
0.65
0.7
Co
olin
g c
ap
acity c
orr
ectio
n f
acto
r
PUHY-P126TGMU
Ref.: CbRPL_PUHY-P126TGMU_C
126163
9563
Total capacity of indoor unit
200 40 60 80 100 120 140 16066 131 197 263 328 394 459 525
mft.
Piping equivalent length
1
0.9
0.8
0.95
0.85
0.75
0.65
0.7
Co
olin
g c
ap
acity c
orr
ectio
n f
acto
r
PUHY-P204TGMU
Ref.: CbRPL_PUHY-P204TGMU_C
204265
153
102
Total capacity of indoor unit
6-3-2. Heating capacity correction
6-3-3. How to obtain the equivalent length of piping
0.900 20 40 60 80 100 120 140 160
66 131 197 263 328 394 459 525
He
atin
g c
ap
acity c
orr
ectio
n f
acto
r
0.95
1.00
mft.
Piping equivalent length
PUHY-P-TGMU
Ref.: CbRPL_PUHY-P72-234TGMU_H
1 PUHY, PURY-P72TGMU
Equivalent length = (Actual piping length to the farthest indoor unit) + (0.35 x number of bent on the piping) m
+ (1.15 x number of bent on the piping) ft.
2 PUHY, PURY-P96,108TGMU
Equivalent length = (Actual piping length to the farthest indoor unit) + (0.42 x number of bent on the piping) m
+ (1.38 x number of bent on the piping) ft.
200 40 60 80 100 120 140 16066 131 197 263 328 394 459 525
mft.
Piping equivalent length
1
0.9
0.8
0.95
0.85
0.75
0.65
0.7
Co
olin
g c
ap
acity c
orr
ectio
n f
acto
r
PUHY-P108TGMU
Ref.: CbRPL_PUHY-P108TGMU_C
108140
81
54
Total capacity of indoor unit
Ref.: EPL_TGMU
Y-15OUTDOOR UNITS
Y
6. CAPACITY TABLES DATA U1
6-4. Correction at frosting and defrostingDue to frosting at the outdoor heat exchanger and the automatical defrosting operation, the heating capacity of the outdoor unit
should be considered by multiplying the correction factor which shown in the table below.
6-5. Temp. range of running
Table of correction factor at frosting and defrosting
6
43
1.00
1.00
1.00
1.00
1.00
1.00
4
39
0.95
0.93
0.95
0.98
0.94
0.94
2
36
0.84
0.82
0.90
0.89
0.87
0.84
1
34
0.83
0.80
0.87
0.86
0.86
0.86
0
32
0.83
0.82
0.88
0.89
0.87
0.87
-2
28
0.87
0.86
0.89
0.90
0.88
0.88
-4
25
0.90
0.90
0.90
0.92
0.90
0.90
-6
21
0.95
0.90
0.95
0.95
0.90
0.90
-8
18
0.95
0.95
0.95
0.95
0.93
0.93
-10
14
0.95
0.95
0.95
0.95
0.93
0.93
Outdoor inlet air temp.
Outdoor inlet air temp.
PUHY,PURY-P72,96TGMU
PUHY,PURY-P108TGMU
PUHY,PURY-P126,144TGMU
PUHY,PURY-P168,192TGMU
PUHY,PURY-P204TGMU
PUHY,PURY-P216,234TGMU
CWB
FWB
Ref.: CaF_TGMU
30
25
20
15
10
5
-20 -15 -10 -5 0 5 10 15 20 25 30 35 40 45 50
-4 5 14 23 32 41 50 59 68 77 86 95 104 113 122
-4 5 14 23 32 41 50 59 68 77 86 95 104 113 122
Ind
oo
r te
mp
era
ture
Outdoor temperature
30
25
20
15
10
5
86
77
68
59
50
41
86
77
68
59
50
41
-20 -15 -10 -5 0 5 10 15 20 25 30 35 40 45 50
Ind
oo
r te
mp
era
ture
Outdoor temperature
• Cooling
• Heating
Ref.: tr-ygm-y
Ref.: CaF_TGMU
Y-16OUTDOOR UNITS
Y
OP-1OUTDOOR UNITS
OPTIONS
Optional parts for PUHY,PURY-P-TGMU DATA U1
OUTDOOR UNITS
I.Optional parts for PUHY,PURY-P-TGMU
1. JOINT ...................................................................................................................................................................Op- 2
2. HEADER...............................................................................................................................................................Op- 3
3. JOINT KIT "CMY-R160-J" FOR BC CONTROLLER ............................................................................................Op- 4
4. HIGH STATIC PRESSURE MOTOR PAC-KBU04MT-U-F ..................................................................................Op- 5
1. JOINT ....................................................................................................................................................................... OP-2
2. HEADER................................................................................................................................................................... OP-3
3. JOINT KIT “CMY-R160-J” FOR BC CONTROLLER ................................................................................................. OP-4
4. HIGH STATIC PRESSURE MOTOR PAC-KBU04MT-U-F......................................................................................... OP-5
OP-2OUTDOOR UNITS
OPTI
ONS
1. JOINT DATA U1
I.Optional parts for PUHY,PURY-P-TGMU1. JOINT
Piping for CITY MULTITM can be easily done with Joints and headers provided by MITSUBISHI ELECTRIC CORP..
For PUHY-P-TGMU and PURY-P-TGMU, 4 sets of Joints are available. Details for applying the Joint sets are referable to System
Design 5-1. or their own Installation Manual.
For gas pipe: For liquid pipe:
ID: Inner Diameter OD: Outer Diameter
Ref.: W901632in.CMY-Y102S-G
<Deformed pipe(Accessory)><Deformed pipe(Accessory)>
5/8"
5/8"
5/8"3/4"3/4"
3/4"
3/4"5-15/16"
1-3/
16"
1/2"
1/2"
3-5/32"
3-5/32"
3-5/32"
3/8"3/8"
1/4"3/8"
3-31/32"
29/3
2" 3/8"
3-5/32"
For gas pipe: For liquid pipe:
ID: Inner Diameter OD: Outer Diameter
Ref.: W901633in.CMY-Y102L-G1
<Deformed pipe(Accessory)><Deformed pipe(Accessory)>
For gas pipe: For liquid pipe:
ID: Inner Diameter OD: Outer Diameter
Ref.: W901634in.CMY-Y202-G1
<Deformed pipe(Accessory)><Deformed pipe(Accessory)>
For gas pipe: For liquid pipe:
ID: Inner Diameter OD: Outer Diameter
Ref.: W901635in.CMY-Y302-G1
<Deformed pipe(Accessory)><Deformed pipe(Accessory)>
OP-3OUTDOOR UNITS
OPTIONS
2. HEADER DATA U1
2. HEADER
Piping for CITY MULTITM can be easily done with Joints and headers provided by MITSUBISHI ELECTRIC CORP..
For PUHY-P-TGMU and PURY-P-TGMU, 3 sets of Headers are available. Details for applying the Header sets are referable to
System Design 5-2. or their own Installation Manual.
For gas pipe:
For liquid pipe:
Ref.: W901636in.CMY-Y104-G
<Deformed pipe(Accessory)>
<Deformed pipe(Accessory)>
For gas pipe:
For liquid pipe:
Ref.: W901637in.CMY-Y108-G
<Deformed pipe(Accessory)>
<Deformed pipe(Accessory)>
For gas pipe:
For liquid pipe:
Ref.: W901638in.CMY-Y1010-G
<Deformed pipe(Accessory)>
<Deformed pipe(Accessory)>
OP-4OUTDOOR UNITS
OPTI
ONS
3. JOINT KIT "CMY-R160-J" FOR BC CONTROLLER DATA U1
3. JOINT KIT "CMY-R160-J" FOR BC CONTROLLER
Joint kit "CMY-R160-J" for BC controller is used to combine 2 ports of the BC controller at a PURY-P-TGMU system so as to enable
down-stream Indoor capacity above P55 as shown in Fig. 1.
2. Piping at the installation site
The connection of CMY-R160-J to BC controller and pipe leading to Indoor units is referable to Fig. 2. Non-oxidized brazing is
necessary. All piping must be careful to avoid foreign material getting inside.
After piping and air-tight testing, insulation work to the Joint and pipe should be done. Details is available at the Installation Manual.
Ref.: WT04350X01_01
This sheet 1pc 1pc 1pc 2pcs 1pc 1pc 8pcs 1pc
(for liquid side)
The Joint kit include following items:
(for gas side) (for gas side) (for liquid side)
1 Instruction 2 Joint pipe 3 Joint pipe 4 Cover 1 5 Cover 2 6 Cover 3 7 Band 8 Reducer
2 Joint pipe (for liquid side) 3 Joint pipe (for gas side) mm(in.)
Ref.: W901616
1. Designing CMY-R160-J to a PURY-P-TGMU system
The maximum down-stream Indoor capacity for 1 port of BC
controller is P54. When the down-stream Indoor capacity is
above P54, Joint kit CMY-R160-J is needed to combined 2
ports of BC controller to enlarge the capacity, like Group 2 and
3 in Fig. 1.
Maximum 3 Indoor units are allowed to connect to 1 port of BC
controller or 2 combined ports of BC controller using CMY-
R160-J.
When connecting Indoor units to 1 port of BC controller or 2
combined ports of BC controller using CMY-R160-J, CMY-
Y102S-G or CMY-Y104-G is applicable, like Group 1 and 2 in
Fig. 1
Caution: Mixed cooling and heating mode at the same time for
Indoor units connecting to 1 port or 2 combined ports is not
available.
PURY-P-TGMU
Joint kit
CMY-R160-J
CMY-Y102S-GBC controller
Fig.1. CMY-R160-J applying scheme
IU IU IU
IU IU IU IU
Group1
Total Indoor Capacity
<=P54
Group2
Total Indoor Capacity
P55 to P96
Group3
Total Indoor Capacity
P72 or P96
Ref.: WT04350X01_02
Clamping torque 35N•m
Use two spanners simultaneously for tightening.
Coat the flare contact surface with refrigerating machine oil.
Clamping torque 80N•m
Use two spanners simultaneously for tightening.
Coat the flare contact surface with refrigerating machine oil.
Piping to indoor unit
(Non-oxidized brazing)
Joint pipe (for liquid side)2
Joint pipe(for gas side)3
Flare nut 15.88 (5/8")
Flare nut 9.52 (3/8")
Fig.2. Connecting CMY-R160-J Ref.: WT04350X01_03
OP-5OUTDOOR UNITS
OPTIONS
4. HIGH STATIC PRESSURE MOTOR PAC-KBU04MT-U-F DATA U1
4. HIGH STATIC PRESSURE MOTOR PAC-KBU04MT-U-F
With PAC-KBU04MT-U-F, the PUHY-P-TGMU,PURY-P-TGMU outdoor unit will gain external 30Pa or 60Pa static
pressure, which makes the outdoor unit exhausting design much easier to coordinate with the building situation.
1. Inside the package of PAC-KBU04MT-U-F, following items are enclosed together with the installation manual.
2. Installing the high static pressure motor PAC-KBU04MT-U-F
onto the outdoor unit. 2.1 You may order outdoor unit installed the optional PAC-KBU04MT-U-F
instead of non-static pressure motor, and set the expected external
static pressure at shipment, or change the motor by yourself at the
field. For the details you need to talk to your provider.
2.2 In the case you change the motor, and set the expected static
pressure at the field. Instruction 2.2a, 2.2b and 2.2c should be
followed.
2.2a. Mounting the motor
A. Remove the screw1, and remove the fan guard, referring to Fig.1.
B. Remove the screw2, and remove the panel 1, referring to Fig.1.
C. Remove the nut, and remove the propeller fan, referring to Fig.2.
D. Remove the connector of the motor, referring to Fig.3.
E. Remove the screw3 of the motor, and exchange the motor,
referring to Fig.4.
F. Connect the motor connectors.
Secure the connectors with a clamp below the motor base not
directly exposed to rainwater, referring to Fig.5.
G. Remove the screw4 from both sides of the side panel and replace
the side panel with the supplied reinforcing plates. referring to
Fig.6.
H. Put back the propeller fan, fan guard and panel in the reverse
order from A-C.
(Bind the nut tight with the torque of 20 ± 2 N·m.)
I. Attach the supplied label on the unit, referring to Fig.1.
2.2b. Switching for 30Pa or 60Pa static pressure
1 Remove the Panel 2, referring to Fig.1.
2 Remove the control box cover.
3 Set the DIPSW, which is on the front board in the control box,
referring to the figure below.
(For the DIPSW location, refer to the wiring nameplate on the
back of the control box cover).
2.2c. Field work of 2.2a and 2.2b needs working space at the front
and back of the outdoor unit. Enough working space should be
considered for the field work of 2.2a and 2.2b. For example,
upon corrective installation 20mm(3/4") or the like interval is
helpful.
Label
Panel 1(front)
Screw2
Screw2
Screw1
Fan guard
Fig.1
Panel(back)
Sidepanel
Panel 2(front)
30Pa
60Pa
PUHY-P-TGMU
PURY-P-TGMUDIPSW3-9
ON
ON
ON
DIPSW5-1
OFF
Connector
Establish a trapbelow the connector.
Secure the motor connector. The motor connector must be below the motor base.
Motor
Fig.5
Fig.4
Fig.6
Fig.3Fig.2
NutPropeller fan
Screw4
Front View
Screw4
Screw3
Fix the wire
by the binder
Screw3
Screw4
Top View
Ref.: WT04579X01
1 Instruction 2 Motor 3 Reinforcing plates 4 Label
1 1 1
5 Binder
12
OP-6OUTDOOR UNITS
OPTI
ONS