02

Chain conveyors are utilized to carry the grain horizontally. Conveyor design may vary depending on many parameters such

as the purpose of usage, capacity and type of product, etc. Conveyors are also available with the bottom or side surfaces

covered with polyethylene or wear-resistant steel plates as an option to be more durable.

Benefits;

• High equipment, safety, operational efficiency

• Maximum use, minimal maintenance expenses

• 7 \ 24 after sales services

• Economical solutions with low energy expenditures

• Modular design, easy assembly

03

CHAIN CONVEYOR

Mysilo chain conveyors are presented with a wide range of

products with different models and product options from

20tons/h up to 1000tons/h capacity. All conveyors are

manufactured from the galvanized sheets assuring the

longest lifetime. Connections with bolt and nut allow easy

installation, technical service and maintenance. Different

models and designs are available in accordance with the

customer needs, purposes of usage and capacities.

Chain breakage and grain blockage sensors are provided

with the conveyors as standard. In case of breakage, chain

falls on the sensor mechanism and the system is stopped by

the switch connected to the sensor avoiding potential

equipment damage.

04

CHAIN CONVEYOR WITH POLYETHYLENE ROLLERS (P)

Chain Conveyors with polyethylene rollers are recommended to use for

the facilities with small capacities & low annual circulation.

P-Polyethylene Roller   PK-Polyethylene Roller & Guided

CHAIN CONVEYOR WITH STEEL TYPE ROLLERS (Ç)

Chain Conveyors with steel rollers are recommended to use for the

facilities with high annual circulation. Guided type conveyor trough is

available as an option. With the guide section of the conveyor, the lifetime

of the bottom sheet is extended against corrosion.

Ç-Steel Roller   PK-Steel Roller & Guided

DIVISIONAL CONVEYOR (B)

Divisional type conveyors are used where a single conveyor is used to load

multiple discharging points and grain mixing is not desired. The grain

blockage is also prevented with the intermediate section bringing back the

grain again to the desired loading point. These types of conveyors are used

especially in the facilities of feed and seed industry.

DIVISIONAL GUIDED CONVEYOR (BK)

With the guide section of the conveyor, the lifetime of the bottom sheet is

extended against corrosion.

CHAIN CONVEYOR MODELS

Polietilen rulolu konveyör ve Polietilenrulo+kılavuzlu konveyör

Chain Conveyor with polyethylene rollers – Guided Chain Conveyor with polyethylene rollers

Çelik rulolu konveyör ve Çelik rulo+kılavuz konveyörChain Conveyor with steel rollers –

Guided Chain Conveyor with steel rollers

Bölmeli konveyörDivisional Chain Conveyor

Bölmeli kılavuzlu konveyörDivisional & Guided Chain Conveyor

05

The chains used in the conveyor vary depending on the length, model and capacity of the conveyor.

Kayış-kasnak mekanizmalı tahrikŞaft mantajlı helisel redüktör bağlantılı tahrikHead section with a belt - pulley mechanism

Shaft mounted helical gearboxes connected head section

Aküple redüktör bağlantılı tahrikHelisel konik dişli redüktör bağlantılı tahrik

Coupled gear connected head sectionHelical-bevel gear connected head section

MYZ 1 Type Chain and Flights MYZ 2 Type Chain and Flights MYZ 3 Type Chain and Flights

06

CHAIN CONVEYOR TROUGH DIMENSIONS

CHAIN CONVEYOR INLET PLATE

07

CHAIN CONVEYOR INTERMEDIATE DISCHARGE ADAPTOR

08

CHAIN CONVEYOR LAST DISCHARGE ADAPTOR

09

ELECTRICAL GATE - VERTICAL CHAIN CONVEYOR

(KEZKD MODEL)

The gates are used to control the grain flowing. Guide in the

gate moves on the rollers and opens and closes the grain

flowing. Correct gate should be selected according to the

conveyor trough type. Channel on the gate facilitates the

passage of the conveyor chain and through this channel; the

conveyor chain passes without falling down. The gates are

manufactured from galvanized steel with 2.5 mm thickness

as standard.

10

ELECTRICAL GATE - HORIZONTAL CHAIN CONVEYOR(KEZKY MODEL)

11

Capacities are shown in m3. Capacities may vary according

to the product density and type. To find out the capacity of

the conveyor; please multiply the above mentioned m3/h

value and the grain density.

12

13

14

15

16