Z-TEC LITE

FOLDING

LIGHTWEIGHT ALUMINIUM

WHEELCHAIR

USER MANUAL

Please ensure that this manual is read and understood

before using the wheelchair

Z-Tec Mobility Unit 1B Albion Works, Moor Street, Brierley Hill, West Midlands DY5 3SZ

Available Models:

Z-Tec-LITE SP (Self-Propelled with 45cm seat width)

Z-Tec LITE TR ( Transit with 45cm seat width )

Self-propelled

M o b i l i t y F o r L i f e

• 1. Maximum weight capacity 113kg

• 2. Seat width 45cm

• 3. Half folding backrest

• 4. Upholstery colour black & Grey

• 5. Attendant Handbrakes ( Transit Only )

• 6. Fabric Sideskirts with Storage Pocket

• 7. Heel straps on Removable Footrests

• 8. Quick Release 56cm solid rear wheels

• ( Self-Propelled Only )

with matching Black Tyres & Handrims.

• 9. 30 cm Solid Rear Wheels ( Transit Only )

• 10. Storage pocket in back upholstery

• 11. Seat belt

• 12. Push Button Adjustable Armrests

• 13. Net Wt. Transit 11.95kg

• 14. Net Wt. Self-Propelled 13.13kg

Dimensions / Specifications

(Jun 2011)

Transit

Product Description

The Z-Tec Lite wheelchairs have been designed to be used by a range of clients whose

mobility has been reduced by a disability or chronic illness. Suitability of these wheelchairs

can vary from a permanent disability such as arthritis or a stroke, to a chronic illness such as

polio or a spinal chord injury. The design incorporates a 4 wheeled wheelchair, with a back,

arm and leg support, with the intention of it being used as a wheeled conveyance to enhance

the mobility of a person with a maximum mass of 113kg, where mobility is impaired. The

design ergonomically accommodates a wide range of disabilities for all ages of user.

Suitability is dependant upon the degree and nature of disability and where possible should

be determined through a thorough risk assessment carried out by a qualified medical

professional. This wheelchair is suitable for assisting in rehabilitation, restoring

independence and in some instances long term alleviation of disabilities and chronic

illnesses.

Consideration must be given at point of prescription to required usage with regard to the

capabilities of the user and the environment and terrain on which the product will be used.

The Z-Tec Lite, manufactured by Z-Tec Mobility is placed on the EU market, CE

marked, as Class 1 Medical Device and complies with the Essential Requirements of the

Medical Devices Directive 93/42/EEC.

PLEASE ENSURE THAT THIS MANUAL IS READ AND

UNDERSTOOD BEFORE USING THE WHEELCHAIR

Specification

Self-Propelled

• Length (Inc. Footrests) 108cm

• Width: 65cm

• Height: 93.5cm

• Seat Height: 51cm

• Seat Width: 45cm

• Seat Depth: 45cm

• Width Between Arms: 45cm

• Maximum User Weight: 113kg

• Seat to Footrest Adj: 39.5cm - 50cm

• Weight ( Inc. Footrests) 13.13kg

• Net Weight: 11.88kg

• Rear Solid Wheels 60cm

• Front Solid Casters 18cm

Transit

• Length (Inc. Footrests) 105cm

• Width: 61cm

• Height: 96cm

• Seat Height: 51cm

• Seat Width: 45cm

• Seat Depth: 45cm

• Width Between Arms: 45cm

• Maximum User Weight: 113kg

• Seat to Footrest Adj: 39.5cm - 50cm

• Weight ( Inc. Footrests) 11.95kg

• Net Weight: 10.7kg

• Rear Solid Wheels 30cm

• Front Solid Casters 18cm

Parts Description

Adjustable Armrest

Swing Away Footrest

Release Lever

Flip-up Footplates

& Heel Straps

Solid Front Castors

Quick Release 56cm Rear Wheel

with Solid Tyres & Handrim

( Self-Propelled only )

Parking Brake

Attendant Handle

Folding Back

Back Upholstery &

Back Storage Pocket

A toolkit is provided with your wheelchair to assist

with appropriate adjustments.

Safety Belt fitted as standard.

Storage Pocket fitted as standard

on Fabric Sideskirt & on the

Back Upholstery for storing a few

small items.

Additional Items

Handling Opening and Folding

Opening

1. Rest both hands on each of the seat upholstery support rails and press down

until the seat and back upholsteries become tight. See photo 2

2. Make sure that the seat support rails are safely located in the support cups.

Warning! Do not place your fingers between the seat

upholstery and the seat tubes when opening or folding the frame.

Folding

1. Lift up the footplates

2. Grasp the centre of the seat upholstery from the back and front and lift the seat

upwards. This will cause the chair to fold up by its own weight. See photo 1

Photo 1

Seat Support Rails

Photo 2

Folding Backrest

1. Press the release lever on each

side of the wheelchair back.

2. When released fold down for

easier storage,

3. Make sure the locking mecha-

nism is fully engaged before sit-

ting in wheelchair.

Half Folding Backrest

1.

2.

3.

Adjustable Armrest

• To Release

Push the release button inward and lift the arm-

rest up.

• To Fasten

Release the button when the desired adjustment

of the armrest is made to secure into position.

Warning! Lock armrests by securing release button mechanism before using the wheelchair. Never lift

the wheelchair by the armrests or footrests as these parts are detachable and it may cause

damage to the wheelchair and/or injury to the user.

Parking Brake The brakes are preset and adjustment should only be necessary if the brakes become loose or

no longer function correctly.

To apply the parking brake push the brake lever towards the front of the wheelchair. Push

the lever back to release the brakes. See photos below. These levers are to be used by hand

only.

Parking Brake On

Forward

Parking Brake Off

Backward

To remove the rear wheels depress

the quick release button and pull

the wheel away from the frame of

the wheelchair. The Quick Release

axle will also be removed at the

same time. For safety reasons this

should only be carried out when the

wheelchair is unoccupied and the

wheelchair can be supported.

Quick Release Rear Wheel

Quick Release Button in

centre of wheel hub

These brakes are NOT to be used as a means of slowing the wheelchair or bringing it to a stop, they are a

parking brake only.

Adjustment would be required as the knurled brake lever or tyre wears.

Take extra care when re-fitting to ensure the wheel is positively located and locked into

place before using the wheelchair. This can be done by gently pulling the wheel to ensure it

is located correctly.

Footrest

To remove the footrest, first lift up the footplate then activate the release lever (photo b).

Swing away the footrest to the side of the wheelchair. Carefully grip the footrest assembly

and lift straight up (photo c). Be very careful not to angle the footrest assembly as it may

catch the wheelchair frame and could damage the paintwork. You now can remove the foot-

rest assembly away from the wheelchair (photo d). To re-fit, follow the instructions above in

reverse order.

a b c d

Warning! Be very careful not to angle the footrest assembly as it may catch the wheelchair frame and

could damage the paintwork.

Footrest Adjustment

Leg rest Adjustment:

For optimum comfort it is important to attain the correct leg position (1.). The footrests have

been designed so that they can be extended by releasing the fixing screw (2.) on the back of

the footrest hanger. This lengthens the leg rests and once a comfortable position is found the

fixing should be secured tightly before use. A toolkit is provided.

( 1.)

( 2.)

Care and Maintenance

• Tyre wear � � � �

• Wheel bearings � �

• Castors � � � �

• Brakes � � � �

• Legrest locking mechanism. � �

• Seat & Back upholstery. � �

• Armrest operation and arm pad wear. � �

• Quick Release mechanism. � � � �

• Anti-tip adjustment. (If available) � �

• Half folding back operation. � �

• Folding mechanism. � �

• Fixtures & Fittings � � � �

Recommended Check / Service Interval Daily Weekly Monthly Annually

In order to get the most from your wheelchair it is recommended to take care of it and carry

out regular checks and maintenance. Some simple daily and weekly checks can be carried

out by a competent person. It may also be required to make adjustments and carry out some

minor maintenance on a monthly basis, again this can be done by a competent person. At

least once a year it is recommended to have your wheelchair fully inspected and serviced by

one of Z-Tec’s approved dealers.

The wheelchair should be kept clean and dust free by using a duster or damp cloth regularly

with a mild detergent added. Do NOT use any abrasive cleaners as they may damage your

wheelchair.

The wheelchair should be stored in a clean and dry place away from direct sunlight and in

the folded position.

Should any defects become apparent on your wheelchair or if the brakes do not respond as

well as expected cease using the wheelchair immediately, get it checked by a competent

person or contact your Z-Tec mobility dealer for inspection.

Product Lifespan

This wheelchair has been designed and manufactured to a high standard and subject to regular care and

maintenance it is expected to last for 5 years.

Ascending, Traversing Across & Descending Slopes, Steps, Inclines etc..

It is important to keep yourself safe at all times when using your wheelchair especially when travelling on

slopes, inclines or while negotiating steps or kerbs. The following guidelines will help provide some

information regarding stability while using your wheelchair.

n.b. Further detailed information can be found in the leaflet DB2004(02) located on www.mhra.gov.uk

Website.

It is also important to plan and select your route carefully to avoid uneven or soft ground and wherever possible

an alternative route should be used. Do not use on an incline if covered in snow, ice or a film of water or oil.

You must not make any unauthorized adaptations or changes to your wheelchair as this may cause your

wheelchair to become instable. You must also avoid incorrect seating positions or movements that will also

cause your wheelchair to become instable.

You must not exceed the maximum carrying capacity of 113kg for this wheelchair.

If you are unsure of any details indicated here, please consult with a qualified person e.g. Authorised Z-Tec

Dealer

Normal sitting position to maintain stability on level ground.

Normal sitting position to maintain stability while travelling up or down

a slope. Do not exceed the maximum gradient of 10º (18%).

If the slope is wet or slippery this will further reduce stability.

Normal sitting position to maintain

stability while traversing across a

slope. Do not exceed the maximum

gradient of 10º (18%).

If the slope is wet or slippery this

will further reduce stability.

Stability can be improved a little by leaning forward while travelling uphill.

Do not reverse down a hill.

Leaning into the slope can

improve stability

Leaning or reaching e.g. to pickup objects could

increase the risk of instability and assistance should be

sought wherever possible either by someone else or by

means of a mechanical aid.

Warranty Z-Tec wheelchairs are guaranteed for 12 months from the date of purchase, this warranty is not

transferable. Should any part of the wheelchair require repair or full replacement as a result of a

manufacturing or material defect within the warranty period, parts will be supplied free of charge.

The guarantee excludes tyres and all items that have been subjected to undue wear and misuse. Under

normal circumstances no responsibility will be accepted where the wheelchair has not been

maintained in accordance with the manufacturer’s recommendations. This does not affect your

statutory rights.

If any other issues arise that are not mentioned in this user manual please write to the address on the

front of this manual.

General Safety Tips

Before using the wheelchair please read the safety information below:

Get to know your wheelchair.

Be careful during your first ride in this wheelchair.

Do not exceed the maximum gradient of 10º (18%).

Use slow speeds on gradients.

Do not reverse down a gradient.

DO NOT operate on an incline if covered in ice or a film of water or oil.

DO NOT operate on roads or highways.

Practice using on level ground as well as going up and down hill.

Only one person to occupy the wheelchair.

Do not stand on the footplates.

DO NOT stand on the frame of the wheelchair.

Keep both feet on the footplates when moving.

Do not use escalators, use a suitable lift.

Users should not sit in the wheelchair whilst riding in any means of transport.

Remain seated at all times when moving.

Do not reach for items further than your arm will extend while seated.

Maintain correct balance while seated in the wheelchair.

When moving be aware of potential hazards, such as steps, doorways, appliances, children's toys,

cables, etc..

Always apply the parking brakes when transferring.

The wheelchair brakes are not suitable for slowing the wheelchair down..

In the event of damage or repair, please consult your service agent / dealer.

Unprofessional or incorrect adaptation or adjustment work could increase the risk of

accidents.

Users may put themselves at risk by improperly using their wheelchairs.

Product Disposal

If you wish to recycle or dispose of your wheelchair please take it to your local municipal waste site.

Transportation

This wheelchair must not be used as a seat in a motor vehicle. The user should transfer to a seat in the motor

vehicle and the wheelchair stowed away as a piece of luggage.