z-point potentiometer 0-10v output med eller uden afbryder...
TRANSCRIPT
Tekniske data :
Z-point uden afbryder:Forsyning: 15-30V DC
24V AC ±15%0.5W
Ekstern For-sikring: maksimum 1ATemperatur: 0 C - 40 CUdgang: 0 - 10V 10mABelastning: Min 1KohmDimension (HxBxD) LSBOX85 - 85 x 85 x 54 mmKapsling: IP 40
Z-point med afbryder:Forsyning: 15-30V DC
24V AC ±15%0.5W
Ekstern For-sikring: maksimum 1AAfbryder: 1-polet (Normally Open)
Maks.belastning: 250 VAC, 10A peak belastning4A Induktiv, 1A Capacitiv
Min. belastning: 5VDC 100mATemperatur: 0 C - 40 CUdgang: 0 - 10V 10mABelastning: Min 1KohmDimension (HxBxD) LSBOX85 - 85 x 85 x 54 mmKapsling: IP 40
° °
° °
Funktionsbeskrivelse:Z-point genererer et 0-10V signal afhængig af indstillingen på knappen på fronten.
Z-point har en intern trimmer til justering af minimumssignal, så det laveste signal på udgangen kan justeres fra 0V til 4,5V.
Modellen Z-point med afbryder har indbygget 1-polet afbryder.Denne er afbrudt når knappen er drejet helt mod uret, og slutter, når der drejes med uret (der høres et klik).
www.lscontrol.dk tel. +45 5550 5550 fax +45 5550 2265
Z-pointmed afbryder
Z-pointuden afbryder
0-10V afhængig af potentiometer-indstilling
1 2
Afbr.
9 4
5 6
0 -
10V
-+1 2 5 6
0 -
10V
-+
Z-Point Potentiometer 0-10V output med eller uden afbryder
Varenummer: 41631 Varenummer: 41630
Tegning: 950-205227_Z-point_0-10VOUT_ES926_DKRev.: 1.1Dato: 15/2-2013Tegnet af: FF/KMProducent: LS Control A/S
+ - + -
Technical data :
Z-point without switch:Supply: 15-30V DC
24V AC ±15%0.5W
Mains fuse: max 1ATemperature: 0 C - 40 COutput: 0 - 10V 10mAImpedance: Min 1KohmDimensions (HxWxD): LSBOX85 - 85 x 85 x 54 mmEnclosure: IP 40
Z-point with switch:Supply: 15-30V DC
24V AC ±15%0.5W
Mains fuse: max 1ASwitch: 1-pole (Normally Open)
Max load: 250 VAC, 10A peak4A Inductive, 1A Capactive
Min load: 5VDC 100mATemperature: 0 C - 40 COutput: 0 - 10V 10mAImpedance: Min 1KohmDimensions (HxWxD): LSBOX85 - 85 x 85 x 54 mmEnclosure: IP 40
° °
° °
Description:Z-point generates a 0-10V signal depending on the setting of the button on the front.
Z-point is equipped with an internal trimmer for adjustment of minimum signal: from 0V to 4,5V.
The Z-point model with switch is equipped with an 1 pole switch.The switch is in off position when turned contra clockwise, and on when turned clockwise (a click is heard).
www.lscontrol.dk tel. +45 5550 5550 fax +45 5550 2265
Z-pointwith switch
Z-pointwithout switch
0-10V depending on potentiometer setting
1 2
Switch
9 4
5 6
0 -
10V
-+1 2 5 6
0 -
10V
-+
Z-Point Potentiometer 0-10V output with or without switch
Product number: 41631 Product number: 41630
Drawing: 950-205227_Z-point_0-10VOUT_ES926_UKRev.: 1.1Date: 15/2-2013Drawn by: FF/KMManufactured by: LS Control A/S
0 -
10V
Supply
Sup
ply
-+ -+