your partner for high quality control and measuring ......mechanical pressure mechanical pressure...

YOUR PARtner for high quality control and measuring instruments

Dynamic Instrument Services is a dynamic and fast growing company, established in 2017 by experienced professionals as a supplier of high quality control- and measuring instruments.

(Petro-)chemical, maritime, food processing and general industry, all sectors can rely on us for the right product, with the right quality at the right moment. Our business relations appreciate and value our service and solution based philosophy. We secure our high quality services by partnering with only the most respected companies in the business to provide the best possible combination of services and products.

We provide an in-house laboratory where we assemble, configure and document your tailor-made products to the highest standard.

Top quality products, top quality service and top quality reliability are what we strive for.

You are more than welcome to test our willingness!

Our partners:

Contents:

Our lab ..................................................................................... 4

Labom ..................................................................................... 6

Siemens ..................................................................................... 12

Jumo ..................................................................................... 20

Schneider ..................................................................................... 22

Armano ..................................................................................... 24

Trafag ..................................................................................... 26

Clorius ..................................................................................... 28

Our lab

Mechanical Pressure Mechanical pressure gauges are mainly used in indus-

trial measuring applications for local measurements

and reading off the pressure. They have a simple,

robust and reliable design and do not require any ex-

ternal energy. They transmit the pressure through the

elastic deformation of a baffle wall within a pressure

chamber. This deformation is mechanically transferred

to the pressure display.

Mechanical pressure gauges are used in a wide pres-

sure range from 2.5 mbar to 1000 bar because of the

simple measuring principle and robust design. Mecha-

nical measuring equipment at LABOM is manufactured

according to EN 837.

LABOM diaphragm seals Diaphragm seals are partitions in pressure measuring instruments that prevent the measured medium from entering

the measuring system. This means that they protect the measuring equipment from aggressive, highly viscose or

congealing measured media and high measured medium temperatures, damping pressure fluctuations and pressure

peaks and increase overload resistance. In addition, they offer a solution in case of an unfavourable position of the

measuring point, and allow the use of pressure gauges in potentially explosive atmospheres as well as the elimination

of dead space when arranging measuring points.

The design of diaphragm seals can vary greatly depending on the measurement task they support: LABOM is con-

tributing to precise results and greater operating reliability with patented diaphragm types and customer-specific

designs for diaphragm seals.

Resistance sensors use the effect that the electrical resistance of a material changes depending on its

temperature. These changes of the resistance-value can be measured, and converted into a tempera-

ture value. Pt100/ Pt1000 resistance thermometers are used wherever high precision and low drift are

required.

Temperature transmitters already have a signal from the sensor (resistance value or voltage value in case

of thermocouple) on the input. This input is converted by the transmitter into a standard normsignal (mV

or mA). The transmitters are very compact, so that they can be build in, in the connection head of the

temperature probe, or mounted on a DIN-rail. These changes in resistance or voltage signals are conver-

ted by the measuring transmitter into superimposed standard signals. The design of measuring transmit-

ters is so compact that they can be incorporated in the connecting head of thermometers either on the

measuring insert instead of the ceramic base or in the cover of the head housing.

“Intelligent” digital measuring transmitters allow connection to all common Pt sensors and can be easily

parameterised online through a local interface or via HART or Profibus.

How to optimize processes with our automation and instrumentation portfolio

High-quality processes are crucial in the process industry. Only then you get the required results. And it’s only then that plants work efficiently and therefore productively. Process instrumentation and analytics, as well as weighing technology all play a crucial role here. They measure, analyze, regulate and control industrial processes and thus contribute to increasing the efficiency of process plants and improving product quality. Benefit from the versatility of our holistic solutions for your process tasks - with integrated solutions from a single source. Benefit from the openness of the systems. And from constant innovations and comprehensive services.

SITRANS P320/P420

• Diagnostic functions in accordance with NAMUR recommendation NE107

• SIL devices developed according to IEC 61508

• SIL validation on the device or remotely with SIMATIC PDM

• Reduction of internal inductance for Ex applications to LI = 0

• Step response time for pressure type T63 = 105 ms and for differential pressure

type 135 ms.

• Minimal conformity error

• Very low temperature influence

• Very good long-term stability

• High quality and service life

• High reliability even under extreme chemical and mechanical loads

• For corrosive and non-corrosive gases, vapors and liquids

• Extensive diagnostics and simulation functions

• Separate replacement of measuring cell and electronics without recalibration

• Wetted parts made of high-grade materials (e.g., stainless steel, alloy, gold,

Monel, tantalum)

• Infinitely adjustable spans from 0.01 bar to 700 bar (0.15 psi to 10153 psi)

• Convenient parameterization over 4 input buttons and HART interface

Transmitters for applications with advanced requirements

Advanced SITRANS P320/P420 (successor of the well known SITRANS P DSIII)

SITRANS FC310 • Direct integration - into new or existing control

systems with multidrop-addressable Modbus RTU

RS485 communication protocol and fully configu-

rable byte order to support all PLC types

• Space saving - compact sensor and built-in trans-

mitter allow for more efficient skid and plant layout

• SensorFlash® - comprehensive removable

memory functions (microSD card)

- Calibration certificates

- Pressure and material test certificates (as ordered)

• Flow range - DN15: 8000 kg/h, DN25: 35000

kg/h, DN50: 90000 kg/h, DN80: 250000 kg/h,

DN100: 520000 kg/h, DN150: 860000 kg/h.

• Dedicated performance - delivers true multiparameter

measurements (e.g. mass flow, volume flow, density

and temperature)

• Global service network - for expert-level support

whenever and wherever you need it

SITRANS FC330 • Direct integration - into DCS automation sys-

tems via Profibus 4.0, Modbus, HART 7.2 or

as a standalone solution

• Space saving - compact sensor design with a

remote installation option provides the oppor-

tunity for optimal transmitter location

• SensorFlash® - comprehensive removable

memory functions (microSD card)

- Calibration certificates

- Non-volatile memory backup of operational data

- Transfer of user configuration to other flowmeters

- Data loggin functionality

• Flow range - DN15: 8000 kg/h, DN25: 35000

kg/h, DN50: 90000 kg/h, DN80: 250000 kg/h,

DN100: 520000 kg/h, DN150: 860000 kg/h.

• Global service network - for expert-level support

whenever and wherever you need it

SITRANS F M electromagnetic flowmeters

The task of an electromagnetic flow-

meter from the SITRANS F M product

family is to measure flow volume of

electrically conducting fluids such as

water, chemicals, food and beverage,

slurries, sludge, paper stock and

mining slurries with magnetic parti cles.

The SITRANS F M product range is

divided into three meter types:

SITRANS F S ultrasonic flowmeters

Our ultrasonic flowmeters deliver

extremely accurate results in a

wide range of conductivities,

viscosities, temperatures,

densities and pressures. This

makes them the optimal choice

for measuring a variety of process

industry applications. SITRANS F

S ultrasonic flowmeters are

available in inline and clamp-on

versions. Both meter types can be

used with homo geneous

conductive and non-conduc tive

liquids.

Battery-operated water meters MAG 8000 DN 25 to DN 1200 (1” to 48”) • Battery-powered solution that makes it

easier than ever to install a reliable

water meter virtually anywhere

• Battery lifetime up to 15 years*

• IP68 (NEMA 6P) enclosure and sensor

painting according to ISO 12944 class

C4M corrosivity for burial and sub-

merged applications

• Easy installation without straight

inlet/outlet

• Rich add-on communication modules:

Modbus RTU, Encoder card,

3G/UMTS module

SITRANS LR560

• 2-wire, 78 GHz FMCW for ranges

up to 100 m

• Very narrow 4-degree beam angle

with 3” lens antenna

• Aiming flanges with purge, easy to

install

• Process intelligence integrated and

plug and play performance

Radar type

Guided wave type

SITRANS LG-SERIES

• LG240/LG250/LG260/LG270

• Automatic buildup adjustment

• Remote display and electronics

option

• 2mm accuracy

• Backlight with full graphic display,

top or side mountable

• SIL 2/3 approved

• Field replaceable probes

• Quick setup wizards

• USB service port option

SITRANS LR250

• 2-wire, 25 GHz pulse radar level

transmitter to a range of 20 m

• For liquids and slurries in storage

and process vessels with high

temperatures and pressures

• Also for corrosive or aggressive

materials and hygienic or sanitary

requirements thanks to the new

flanged and hygienic encapsulated

antennas

SITRANS LH100 and SITRANS P320/420

• Suitable for a wide range of applications in the

chemical and petrochemical industries

• Highly resistant to extreme chemical and

mechanical loads as well as electromagnetic

interference

SITRANS LH100

• Suitable for applications ranging from drinking water or

wastewater up to corrosive liquids thanks to stainless

steel enclosure

• Rugged submersible sensors for hydrostatic level

measurement

• Installation possible in pipes with 1” inner diameter

Ultrasonic type

Hydrostatic type

SITRANS PROBE LU240

• Continuous level measurement up to

12 m range

• Easy installation and simple startup

• Programming using 4-button HMI or

SIMATIC PDM

• Communication using HART

• ETFE or PVDF transducers for chemical

compatibility

• Process intelligence signal processing

• Auto False Echo Suppresion for fixed

obstruction avoidance

• Low power and current startup

SITRANS LUT400

• Compact, single-point, ultrasonic

controllers for continuous level or

volume measurement of liquids,

slurries, and bulk solids, and high

accuracy monitoring of open

channel flow

• Industry-leading 1 mm accuracy,

setup time of less than a minute

• Intuitive navigation via the local

user interface

• Compatible with the entire line of

Siemens Echomax ultrasonic

sensors with a 0.3 to 60 m range

Pointek CLS100

• Suitable for level detection in

constricted spaces

• Sensguard protection of probe for

harsh and abrasive environments

and chemically resistive probe

types available

• Compact 2-wire or 4-wire switch

Pointek CLS200 and CLS300

• Suitable for level detection in de-

manding conditions with high

pressures and temperatures

• Suitable for aggressive applications

including very high temperatures

and pressures

• SIL 2 options

• Smart PROFIBUS versions with

digital display

• Remote operation via PROFIBUS

for status and function testing

• Remote detection of buildup and

monitoring of other process condi-

tion changes

SITRANS LVL100 and LVL200

• Vibrating level switches for liquid

and slurry applications, including

high, low, and demand level alarms

and pump protection

• Wide application range including

high temperatures and pressures,

hygienic versions, large variety of

enclosure materials, SIL 2 options

and remote testing

SITRANS LVS100 and LVS200

• Vibrating level switches that detect

solids with densities as low as 5 g/l

• Best-in-class sensitivity detection

• Options for buildup monitoring

SITRANS TH100

• Pt 100 transmitter

• Low-cost and compact

• Configurable using PC (SIPROM T)

SIPART PS2

• Most widely used positioner for linear

and part-turn actuators

• Generates diagnostic data for itself, its

environment as well as valve and actuator

• Easy installation and fast commissioning

• Reduced maintenance required in the plant

• Safe process control

• Versions with external non-contacting travel

sensors

• High flexibility in the range of stroke from

3 up to 200 mm

• Communication via PROFIBUS PA,

FOUNDATION Field bus or HART

• Ex d explosion-proof version

• Makrolon, aluminum or stainless steel

enclosure

SITRANS TH200

• Universal transmitter

• Configurable using PC

(SIPROM T)

• Cost-saving operational

features

• Diagnostics LED

SITRANS TH300

• HART universal transmitter

• Configurable using

SIMATIC PDM or HART

protocol

• Cost-saving operational

features

• Remote or local diagnostics

and simulation

• Diagnostics LED

SITRANS TH400

• Fieldbus transmitter

• For PROFIBUS PA or

FOUNDATION Fieldbus

• Configurable with SIMATIC

PDM (PA) or AMS (FF)

• Extensive diagnostics and

simulation functions

• Transmission of important

device and process data over

the bus cable

Temperature sensors for industry, plant engineering and vehicle engineering

JUMO has been producing high-quality RTD temperature probes and thermocouples since the mid-1960s. Temperatures up to approximately 500°C are generally measured using RTD temperature probes. The platinum temperature sensor has established itself by ensuring a high degree of measuring accuracy and long-term stability. Thermocouples are suitable for measuring higher temperatures. Here, thermocouples of type L, J, K, N, S, or B are used depending on the requirement. The in-house DAkkS lab and our own temperature sensor thin film production facilities enhance JUMO’s expertise and offer our customers ultimate flexibility. JUMO is now one of the world’s leading manufacturers in this field.

JUMO DICON touch - Two-Channel Process and Program Controller

Etron Electronic microstat

Etemp Temperature probes

Thermocouples and RTD temperature probes with terminal head or connecting cable

RTD temperature probes with wireless data transmission

Vibrotemp Temperature probes

AS-Schneider is a leading manufacterer of instrument valves and manifolds for the oil, gas, chemical, petrochemical, power generation and processing industries. The world leading manufacterer of high performance valves for large diesel engines for ship propulsion and power generation.

The instrumentation products are mainly used for pressure and differential pressure measurement in all ranges of engineering.

Armano Armaturenbau GmbH originated from the fusion of Manotherm and AB Armaturenbau. Our product range comprises high-quality mechanical and electronic pressure measuring instru-ments, mechanical and electrical temperature measuring instruments, as well as calibration devices for pressure measurement, for whose quality we enjoy an excellent reputation worldwide for more than 100 years. We are proud to state that our customers appreciate our quality and expertise regar-ding pressure measurement and temperature measurement as well as our flexibility and reliability.

We develop customer-specific solutions for comprehensive applications of pressure measurement and temperature measurement.

Bourdon tube pressure gauges acc. to EN837-1 are suitable for the measurement of positive and negative overpressure between 0-0.6 and 0-4000 bar for gaseous or thin fluid media that do not corrode brass/bronze, stainless steel or Monel.

Bourdon Tube Pressure Gauges

• Available sizes: 40/50/63/80/100/160/250mm.

• Back- or front-flange

• Special ranges: mbar, kPA, MPa, mmH20 or customized

• Certificates: EU, GHOST, NACE

Clorius Controls is a Danish leading manufacturer of valves, actuators, and comprehensive control solutions supporting various marine and industrial applications. Aside from our exhaustive assortment of control valves and actuators, we provide tailored solutions, including electric, pneumatic, self-acting and internally sensed control systems to meet the specific requirements set by the customers.

Clorius’ products are designed to meet the tasking requirements of our clients. Our products, constructed with premium materials ensure longer life cycle, minimal maintenance and lower cost of ownership.

Manufacturer of industrial grade gaskets, O-rings and seals

your partner for high quality control and measuring ......mechanical pressure mechanical pressure...

Documents