your ec&i engineering solutions provider
TRANSCRIPT
1
C&P Engineering ServicesYour EC&I Engineering Solutions Provider
We are passionate about what we do and our business is delivering EC&I projects.Our objectives are to deliver the highest quality innovative and dynamic solutions.
2 3
Industry Experience
Our EC&I engineering services and expertise can be adapted to suit your business requirements and our experience stems from a
wide range of industry sectors:
• Chemical
• Oil & Gas
• Petrochemical
• Power Generation
• Renewable Energy
• Nuclear
• National Grid
• DNO Grid Connections
• Vehicle Manufacturing
• General Manufacturing
• Marine Energy
• Hydro
• Docks
• Pharmaceuticals
• Water Treatment & Utilities
• Steel Manufacturing
• Industrial Manufacturing
• Offshore and Onshore Wind Farms
• Biomass
• Solar Farms
• STOR (Short Term Operating Reserve)
• Energy / Battery Storage
• Aviation & Airports
• Stadiums
• MOD (Ministry of Defence) Sites
• Shipping Ports
Accreditations
About Us
C&P Engineering Services is an electrical and instrumentation
engineering solutions provider, operating in a varied
and diverse range of industries. Established in 1973, we
have been successfully delivering on a worldwide basis,
electrical engineering services, disciplines and projects to
manufacturers, operators and developers.
We provide a wide scope of project services from design,
project management, installation, commissioning, through to
ongoing operation and the maintenance of assets.
Our strong design & build, project management in-house
capabilities and experience offer high quality electrical and
instrumentation engineering services.
We understand the types of challenges that many of
our customers face today, such as the need to minimise
downtime, enhance maintenance efficiency and decrease
operational costs. It is for this reason that we work closely
with our customers to ensure we understand their needs and
objectives, whilst integrating with their operations in order to
assist in maximising return on investment.
Our priority is to provide electrical & instrumentation
engineering services that strive to perform beyond
expectation. We make sure that every project is completed
safely, on time, within budget, to specification and with
minimal downtime. We do this through understanding your
requirements, through carefully listening to your objectives
and utilising design and innovation to add value to your
projects and business.
2 3
4 5
Chemical
Nuclear
Renewable Energy
Steel Manufacturing
Oil & Gas
Pharmaceutical
Ports
Grid Connections & Private Electrical Networks
Vehicle Manufacturing
Water Treatment
Airport & Aviation
Fuel Terminals
Stadiums
MOD (Ministry of Defence) Sites
International Operations
For our customers who operate overseas, we adapt our UK
electrical engineering expertise, experience and operational
knowledge to the country market in which we operate,
ensuring that the delivery of our services are in line with the
requirements of the customer, regulations and local
operating needs.
We approach every international and electrical and
instrumentation project with a goal to succeed, to perform
to plan, delivering continued safety initiatives and value
engineering solutions.
Industry Sectors
4 5
6 7
Committed to QHSE
C&P Engineering Services is committed to ensuring the Health,
Safety and Welfare of its employees and of any other person
who may be affected by our engineering operations, at all of
our sites, works and offices, throughout the UK and worldwide.
All potential hazards and health & safety and environmental
risks are identified and negated or minimised from the outset
to ensure safe, healthy and environmentally sound working
environments for our employees, our customers and other
stakeholders who may be affected by our operations.
Our project engineers and technical installation and
maintenance staff are highly trained, experienced and
competent in their designated area of operation and carry out
their work in a safe and efficient manner with the least possible
disruption to our customers’ business.
We recognise that training and continuous development of our
staff is essential for us to achieve our Quality, Health & Safety
and Environmental goals and we have developed industry
leading systems to ensure that all of our employees are
provided with the necessary skills and experience to carry out
their work effectively whilst working fully in accordance with
globally recognised best practice.
C&P Engineering Services Ltd operates a strong Health & Safety
Culture driven by our goal for zero accidents. We understand
that by following stringent procedures we can ensure your
projects run smoothly and SAFELY.
• Fully Trained and Competent Staff
• Regular On-Site Safety Audits
• Daily Risk Assessment
• Use of the Full range of Personal Protective Equipment (PPE)
• Liaison with Client’s Staff Affected by Work Activities
• Hazards and Risks Controlled at Work-Site
• SMSTS Qualified site Managers
• ISO 9001:2015 Accredited Company
EC&I Engineering Services
Our full range of integrated electrical and instrumentation disciplines include:
6 7
Electrical & Instrumentation Project Services
P. 9
Instrumentation, Control and Automation – PLC, DCS and SCADA Solutions
P. 10
Safety Instrumented System Design & Implementation and Functional Safety Management Consultancy – IEC 61508 / IEC 61511
P. 11
Low Voltage Electrical Design & Build Services
P. 12
8 9
EC&I Engineering Services
Our full range of integrated electrical and instrumentation disciplines include:
Electrical & Instrumentation Project Services
From design, through to procurement, construction,
commissioning and handover, C&P Engineering Services is
ideally placed to manage the whole EC&I engineering process,
including documentation, commissioning, compliance and
testing. Through partnering with C&P we will provide a
comprehensive EC&I package for your projects, ensuring they
are built on time, to budget, with confidence, value
and success.
Our engineers have vast expertise in delivering a wide range
of industrial applications with regards to the specification of
LV & HV electrical, control, automation, instrumentation and
hazardous area disciplines. Our experienced and qualified
engineers take into account the highest standards of quality,
innovation and care when designing, construction and
commissioning electrical, control and
instrumentation solutions.
We provide total EC&I engineering solutions and have
designed and constructed projects, ranging from
instrumentation, control & automation projects in the
process and manufacturing industry to full turnkey projects
(including civil / mechanical) for gas power generation and
other renewable energy power projects in the renewable
energy markets. Our EC&I project services can be combined to
provide the total EC&I engineering solution or divided into the
following
Design & Build specialist areas:
• Instrumentation, Control & Automation Design & Build
• Low Voltage Electrical Design & Build
• Hazardous Area ATEX Electrical & Instrumentation
Design & Build
• High Voltage & Extra High Voltage Design & Build
– 11kV | 33kV | 132kV
• Safety Instrumented System Design & Implementation
- IEC61508/IEC61511
• Functional Safety Management Consulting Services
– IEC61508/IEC61511
• Machinery Safety
Our strong supply chain partnerships and purchasing power
enables us to provide access to high quality, cost effective
EC&I parts and equipment.
A strong combination of design & build and project
management in-house capabilities and experience enables
C&P Engineering Services to deliver the highest levels of EC&I
project services with our partnerships across a varied range
of sectors.
“ Building quality solutions for our clients.”
8 9
Hazardous Area ATEX Inspection, Verification & Consultancy
P. 16
CompEx Electrical Training
P. 17
HV Design & Build / Operation & Maintenance – 11kV | 33kV | 132kV
P. 13
Calibration. Maintenance & Commissioning
P. 18
10 11
Instrumentation, Control and Automation – PLC, DCS and SCADA Solutions
We are specialists in designing, specifying, constructing,
commissioning and maintaining instrumentation, control
and automation systems for a wide range of industrial and
commercial applications.
Our engineering team is familiar with a broad range of
industrial current loop, temperature, pressure, level and flow
sensors and associated equipment and fluent in electronics,
fluid dynamics, material selection, control engineering, and
systems engineering. We are able to deliver pre-configured
panels to custom solutions and our engineers have extensive
expertise to maximise system reliability and minimise
operational risk. Our instrumentation, automation & controls
services also include PLC, DCS and SCADA solutions.
We also have engineers that are functional safety, TUV certified
and come with a wealth of experience having spent many
years in leading, managing and delivering all aspects of the
IEC61508/IEC61511 lifecycle within Top Tier COMAH Facilities.
Stringent quality procedures are not areaapplied to every
project, from specification and construction through to
commissioning. Every application is built to be robust, fit for
purpose and well documented.
Our Instrumentation, Control & Automation Services:
• Pressure
• Temperature
• Flow
• Level
• Analytical
• PLC, PAC and DCS systems
• SCADA, HMI and Web Interfaces
• Data and analytics
• Safety systems (Process & Functional)
• Systems Support
• Control System Migration
• Pneumatic Control Systems
• Instrumentation, Control & Automation System Design
• Pipe Fitting (impulse lines, air headers, control valves,
SOV’s, analysers etc)
• Control Panel Design & Build
• Instrument Enclosures
• Calibration & Repair
• Loop Checking
• Intrinsically Safe Instrumentation
• Modbus / Profibus
• Commissioning & Maintenance
• Machinery Safety
We deliver end-to-end solutions and our control,
instrumentation and automation system engineers provide
feedback and assessment of your needs to produce a detailed
Functional Design Specification that meets the application
requirements, together with a pre-planned strategy.
“ Passionate about instrumentation and control.”
Safety Instrumented System Design & Implementation and Functional Safety Management Consultancy – IEC 61508 / IEC 61511
C&P Engineering Services is an international engineering
solutions provider, offering Functional Safety Management /
Safety Instrumented System services and solutions.
Our engineering consultants cover the following aspects of
Functional Safety Management (FSM)
• IEC61508, IEC 61511 Lifecycle Compliance
• Hazard and Risk Analysis (HARA)
• Hazard and Operational (HAZOP) Analysis
• Layer of Protection Analysis (LOPA)
• Safety Requirements Specification (SRS)
• SIL Determination, Calculations & Assessment,
• Functional Safety Assessments
• SIS Design & Implementation, Replacement of
Non-Compliant ‘Legacy’ Safety Systems
• Quantitative Risk Assessment (QRA) and Risk Management.
C&P has supported multiple industry sectors in the
petrochemical, chemical, oil and gas, nuclear, heavy
manufacturing and pharmaceutical markets and has
supported clients in optimising and delivering compliance
with IEC61511 with a simple and cost-effective approach.
C&P’s consultants are TUV certified Function Safety Engineers,
who come with a wealth of experience and have spent many
years in leading, managing and delivering all aspects of the
IEC61508/IEC61511 lifecycle within Top Tier COMAH Facilities.
Through our consultancy services we are also able to assist
your organisation with keeping abreast of industry best
practices, emerging technologies, the threat from Cyber
Attack and the regulator’s current focus.
We offer a pragmatic, realistic approach to improving the
safety of your process and our team of EC&I Engineers and
Technicians provide cost effective engineered solutions to
bridge any gaps between existing installations and
legislative requirements.
10 11
12 13
Low Voltage Electrical Design & Build Services
We provide Electrical Services to a wide range of
industrial and commercial industry sectors including the
chemical, petrochemical, oil, gas, steel, power generation,
pharmaceutical industries.
Our electrical services range from design, specification,
procurement, installation, inspection and testing,
commissioning, maintenance and on-going support.
We have been Assessed and Certified by the NIC EIC
(National Inspection Council for Electrical Installation
Contractors) as having the technical capability to carry out
electrical work in:
(a) Accordance with BS 7671: 2008 IEE Wiring Regulations for
Electrical Installations.
(b) Areas where potentially explosive atmospheres may be
expected to occur in the form of explosive gases, vapours
or combustible dusts.
• Electrical Design, Installation Commissioning &
Maintenance (Single 230V & three phase 400V)
• Hazardous Area Electrical Installation,
Maintenance & Inspection
• Small Power and Lighting Installations
• LV Power Distribution
• Production Line and Machinery Installations
and Relocations
• Containment (tray, ladder rack, basket tray,
trunking, conduit, dado rail etc.)
• Cable Sizing, Procurement & Installation
• Cable Glanding and Termination
• Control Panel Design & Build
• Periodic Inspection and Testing
• Portable Appliance Testing (PAT)
• Instrumentation
• Network & Data Cabling
• Personnel Hire
• Commissioning
• Maintenance
12
Whatever your requirements, C&P Engineering Services can
provide the complete high voltage electrical
infrastructure solution.
From design, through to construction, commissioning and
energisation, our vast experience with private network
distribution systems and industry knowledge has placed C&P
Engineering Services as a leading UK high voltage
electrical contractor.
We provide reliable, cost effective, technical expertise and
value engineering solutions that support various types of
projects. Our engineering teams cover electrical craftsmen,
fitting teams, jointing teams, cable installation teams, design
engineers and senior authorised engineers.
With over forty years of combined high voltage electrical
engineering experience we are able to tailor our services to
meet your requirements. We can provide straight forward
skilled labour, through to diverse supply, installation,
commissioning and complex turnkey design and build
solutions.
We provide high voltage services for new electrical
installations and refurbishment for MV (medium voltage), HV
(high voltage) and EHV (extra high voltage) - with electrical
networks up to and including 132kV.
Our Services & Areas of Expertise:
• Principal Contractor / Project Management
• Design & Build – Principal Contractor
• Balance of Plant Services up to 132kV for Wind Farm Sites
• Site Management / SAP Duties – Control & Operation
• Switchgear & Transformer Installation & Testing
• Substation Civil & Electrical Design
• Substation Civil & Electrical Installation
• Primary substation: Construction, Installation
and Commissioning
• Switchgear, Transformers, Plant & Apparatus:
Installation, Commissioning and Refurbishment
High Voltage Electrical - 11kV | 33kV | 132kV Design & Build Services
“ Experts in High Voltage Electrical Infrastructure”
13
14 15
High Voltage Operation & Maintenance Services
C&P manage many operational and maintenance contracts
throughout the UK that have unique requirements which can
be due to factors such as operational constraints and security
of supply.
From substation supply and installation, through to managing
the integrity of the high voltage electrical system and life
cycle, C&P have extensive experience in providing cost
effective solutions that ensure greater reliability of the
electrical supply whilst delivering economies to site. Through
developing robust maintenance strategies we are able to
assist your organisation in planning against any unplanned
power supply interruptions that may result in downtime and
production loss.
Operating and maintaining high voltage systems requires
experienced operatives with specialist skills. C&P Engineering
Services fulfil this service for our customers through operating
and maintaining their private High Voltage networks (HV
switchgear, transformers & substations) up to and including
33kV equipment. We also have the capability to design, build
and maintain high voltage 132kV substations and
associated networks.
We specialise in maintaining the following:
• HV / LV Switchgear
• Transformers
• Circuit Breakers – Oil, SF6 , Vacuum
• Protection Relays – Electromechanical and Solid State
• Oil & SF6 Switches and Ring Main Units
• HV / LV Cable Systems
C&P Engineering Services provide High Voltage asset integrity
assessment in order to offer practicable, safe and cost effective
options that will help maintain your plant, protect your
investments and mitigate any financial losses to your
bottom line.
“Maintaining the performance and reliability of your electrical supplies are critical to your operations.”
15
High Voltage Electrical - 11kV | 33kV | 132kV Design & Build Services
Our Services & Areas of Expertise:
• Cable Containment: HV/LV, Cable Ladders,
Trays & Trunking
• Earthing Systems: Brazing and Exothermic Welding
• Panel Wiring: Relay Panels, Remote Terminal Unit (RTUs)
and LVAC boards
• Lighting, Heating, Power and Security Systems: for
Substations and Control Rooms
• Retrofit, Upgrade & Decommissioning: To all Equipment
• Protection Testing & Commissioning
• VLF & Partial Discharge Testing
• HV Inspection & Testing Services up to 68kV (Peak)
• HV Switching
• Cable Fault Finding & Cable Spiking Services
• Cable Installation and Connections: HV/LV, Multi-Core &
Power, Cable Laying, Pulling, Jointing
• Earthing Design & Installation
• Energy Optimisation – Low Loss & Super Low
Loss Transformers
• Maintenance of HV & LV Switchgear
• Transformer Repairs
• Oil Sampling – Laboratory Analysis
• Dissolved Gas Analysis
• Cable Installation & Jointing Services – 11kV and 33kV
• Design and Network Analysis, Discrimination Studies
• Contestable Grid Connections
High Voltage Independent Connection Provider (ICP)
C&P Engineering Services are an ICP (independent connection
provider) and can provide contestable grid connections for
new DNO (Distribution Network Operator) supplies or for
increasing capacity of the connections to site.
We are able to extend the DNO’s network to enable new
electrical connections on the private network and provide
a full turnkey service from initial application and feasibility
studies, design, construction and commissioning, through to
the final adoption, energisation and handover to the
local DNO.
Our Contestable Grid Connection Services:
• Design of the Connection
• Project and Site Management
• Procurement of Transformers, Cables and Switchgear
• Construction and Installation of the Substation(s)
• Private Network & Contestable Grid Connection
• Civil Engineering Services - Route of Connection, Cable
Laying, Overhead Line Services
• Commissioning of all Installed Connection Equipment
• Documentation Control
14
16 17
CompEx Electrical Training
In collaboration with our partner, Gower College Swansea we offer CompEx Electrical Training either at our training facility in
Swansea or at your site.
CompEx is the recognised global scheme for providing candidates with the essential knowledge and practical skills to enable
safe working in potentially explosive atmospheres, whether due to flammable gas, combustible dust or
other hazards.
We provide the following CompEx courses:
• Gas & Vapours – Ex01-Ex04
• Gas & Vapours – Ex01 – Ex04 R (Refresher)
• Foundation Ex F
• Dust Ex05-Ex06
• Responsible Persons Ex14
• Design & Project Engineers Ex12A & Ex12B
• Mechanical Ex11
Various course dates throughout the year at our Swansea Campus:
Call +44(0)1792 897002 or Email [email protected]
Swansea CompEx Training Centre
Gower College Swansea, Engineering Block, TyCoch Rd, Sketty, Swansea, SA2 9EB
CompEx Accreditation:
The CompEx scheme is developed by the Engineering Equipment and Materials Users’ Association
(EEMUA) and JTL Limited, the CompEx Certification Body – accredited by UKAS to ISO/IEC 17024:
Hazardous Area ATEX Inspection, Verification & Consultancy
We provide CompEx certified hazardous area inspection
engineers, electricians and technicians who are highly
experienced in the field of hazardous area IEC. ATEX, IECEx and
DSEAR compliance.”
We assist customers with optimising their Ex asset
performance, safety and integrity through delivering the
following hazardous area ATEX inspection services:
• Ex Inspection of Existing and New Ex Equipment
• Ex Hazardous Area Inspection Strategy Development &
Implementation
• Compiling Ex Registers and Client Databases
• Ensuring Verification of all Installed ‘Ex’ Equipment
Databases
• Ensuring Compliance with all Standards and Regulations
• Gap Analysis and Reporting of Current Ex Inspection
Procedures
• Explosion Protection Documents
• Ex Installation & Maintenance Project Management
• Ex Remedial Repairs & Installation
Our hazardous area ATEX inspection services provide
assistance with the compliance of electrical installations in
potentially explosive atmospheres for new and existing plant
Our services also include the installation, inspection,
testing, and maintenance of electrical installations in
hazardous areas, consisting of:
• Combustible Dusts
• Explosive Gases and Vapours
• Intrinsically Safe Systems
We deliver hazardous area inspections for customers across
a wide range of industries, including the Chemical, Nuclear
Steel, Oil, Petro-chemical, Pharmaceutical, Gas, Offshore &
Heavy Engineering industries. We assist our clients in asset
management, the verification of the integrity of their ‘Ex’
equipment and systems, provide cost effective solutions and
ultimately help to develop a path towards full compliance.
Our CompEx certified inspectors deliver comprehensive
hazardous area inspection schedules and inspection reports,
advising on corrective action where necessary and provide
assurance that you are complying with all the very latest
international standards, codes and practices and meeting your
legal obligations.
Our teams of competent hazardous area inspection engineers
have worked in hazardous areas over many years and are
CompEx qualified for explosive gases and vapours, intrinsically
safe systems and combustible dusts.
“ Assisting our customers to comply with HSE requirements andmaintain a safe place of work.”
1716
18 19
Maintenance & Calibration
Our site support personnel are able to offer a total electrical
and instrumentation routine or preventative maintenance
package that can be designed to meet your
individual requirements.
Our project management team is able to provide long and
short-term contract support to service continuous production.
We offer maintenance solutions that help to extend the life
expectancy of your plant and processes. We can identify
early potential problems and provide service response times
that assist in maximizing the efficiency of any planned or
unplanned downtime or shutdowns.
Process Instrument Calibration Services
C&P Engineering Services recognises the importance of
calibration and offers bespoke on-site calibration services
to ensure that you receive the highest level of quality and
accuracy. Instrument error can occur due to a variety of
reasons; drift, environment, electrical supply, addition of
components to the loop, process changes etc.
Our specialist teams manage a wide range and variety of on-
site calibration programs, ensuring instruments are calibrated
and are traceable to the relevant standards.
C&P’s Process Instrument Calibration Service Provides:
• Confidence that the instruments are measuring correctly
• Calibration assistance to ensure that you are in control of
your processes and operations
• Highly experienced and qualified CompEx instrument
technicians
• Services for all hazardous areas of operations
Process Instrument Calibration Services include:
• Bespoke Site Specific Calibration Programs.
• Project Specific Calibration
• Field and Bench Calibrations
• Laboratory Calibration
• Instrument Loop Testing
We are able to specifically meet the most demanding
environments and requirements through our fully trained and
competent teams of technicians, supervisors and engineers.
All of our process instrument calibrations are traceable to
national standards via our UKAS certified working standards.
We also provide direct hire of our highly experienced
instrument technicians to carry our maintenance through
to ISO process instrument calibrations.
Commissioning
We provide highly skilled personnel that have extensive
knowledge and experience to carry out all stages of the
pre-commissioning process, from point to point wiring checks,
function checks and loop checks to final handover of systems.
We also offer commissioning support using designated
personnel to meet your specific operational requirements,
providing specialist assistance with fault finding, electrical
systems, technical guidance and hand-over of processes
and systems.
18 19
20
For more information about or range of EC&I project services,
maintenance options or CompEx electrical training services, please contact:
C&P Engineering Services Ltd:
Gorseinon Road, Gorseinon, Swansea. SA4 9GE. United Kingdom.
Tel: +44(0)1792 897002 | Email: [email protected]
www.cpengineering.co.uk