you power the world. let us help you power on
TRANSCRIPT
You generate the power that moves the world.
Let us help you keep the power going.More than any other industry, your equipment has to perform with reliability. From day to night. Under fluctuating temperatures. On offshore platforms. At high altitudes.
That is why every detail of your operations matters – including lubricants. Used well, the right lubricants help your operations run better longer.
Caltex Industrial Lubricants delivers focused expertise, advanced products and tailored programs to create comprehensive lubrication solutions for today’s industries. We work with you to take a holistic approach to improving productivity – an approach that helps you solve critical challenges, reach for your goals, and compete to win.
Above all, we are committed to building a strong relationship with you. Together with Caltex, your business can run better reliably.
www.caltex.com/sg/business-solutions.html
POWER GENERATION
02 / 19
Why Caltex Business Solutions
VARTECH™ Solution
Gas and Steam Turbine Plant Products
Reciprocating Engine Products
Customer Testimonials
Ancillary Products
Caltex Reliability-based Program (RbL™)
Product Recommendation by Equipment Type
Eliminate the uncertaintiesWhether you are providing base load or supplementing peak demand, your equipment has to be up and ready to go at all times. With our expertise, industrial lubricants and tailored programs, you can optimize plant efficiency and uptime even under fast-changing conditions.
Gas and Steam Turbine Plants
Our GST Turbine oils with VARTECH™ Technology help protect turbines from deposits and varnish that cause poor performance and outright failure. We provide a full range of industrial oils and greases to lubricate ancillary equipment that surround turbines and support your operations.
Reciprocating Engines
Our HDAX range for stationary gas engines and Taro range for slow- to medium-speed engines are specially formulated to protect against deposits and corrosive acids, reduce lubricant consumption and extend drain intervals.
Maximize uptime
Our Advanced Proprietary Technology:VARTECH™ tackles one of the greatest challenges to reliability and efficiency – varnish.
Even the smallest amount of varnish can cause poor performance – and ultimately become the next major choke point as it builds up and causes machine failure. VARTECH™ Industrial System Cleaner utilizes proprietary technology to eliminate varnish and sludge from systems before they can pose a threat. Non-solvent based, it can be added directly to lubricating oils, and is compatible with most turbine and compressor oils.
Watch how VARTECH™ helps you fight varnish.
Or click here to find out more about VARTECH™.
POWER GENERATION
03 / 19
The Challenge
Why Caltex Business Solutions
VARTECH™ Solution
Gas and Steam Turbine Plant Products
Reciprocating Engine Products
Customer Testimonials
Ancillary Products
Caltex Reliability-based Program (RbL™)
Product Recommendation by Equipment Type
Keep your Gas and Steam Turbine Plants running smoothlyOur GST® family of turbine oils are formulated to deliver enduring performance under the harshest conditions – so you can achieve optimum uptime and productivity.
Products ISO Viscosity Grade
Application Benefits Claims & Approvals
Core Range
GST Advantage RO with VARTECH Technology
32, 46 Non-geared industrial steam, gas and combined cycle turbines including rotating machinery and turbo-compressors
Exceptional oxidation and thermal stability for long service life at severe temperatures with minimal deposit formation
Siemens TLV 901304 and TLV 901305 • MAN Energy Solutions 10000494596 rev 2 • GE Specification HTGD 90 117 • Alsthom G-HTCT689029 • Ansaldo Energia TG02-0171-E00000] • Mitsubishi Hitachi Power Systems MS04-MA-CL002/MS04-MA-CL001 • General Electric GEK 32568k, GEK 28143b, GEK 46506e, GEK 27070, GEK 107395 including GE Frame 9HA.01 Gas turbines, GEK 121608 • Solar Turbine ES9-224 Class II • ANSI/AGMA 9005-E02-R&O ASTM D4304-Type I/Type III • British Standard BS 489:1999 • DIN 51515-1 and 51515-2 • ISO 8068-L-TSA and L-TGA • Chinese Specification GB1120-2011 L-TGA and L-TSA (Type A and Type B)
GST Advantage EP with VARTECH Technology
32, 46, 68, 100
Geared industrial steam, gas and combined cycle turbines including rotating machinery and turbo-compressors
Low varnish potential ensures varnish formulation is minimised to protect the equipment
Ansaldo EnergiaTGO2-0171-E00000/C, AE64.3A • GEC Alstom NBA P50001 A, NBA P50003 A • General Electric GEK 107395 including GE Frame 9HA.01 Gas turbines, GEK 27070, GEK 28143b, GEK 32568e/ f/h/i/j, GEK 32568k, GEK 46506d • MAN Energy Solutions 10000494596 • Siemens MAT 812101 812102; MAT 812106 812108; MAT 812109 • Siemens TLV 9013 04 and TLV 9013 05 • Siemens-Westinghouse M SPEC 55125Z3 • Solar Turbine ES9-224 Class II • Toshiba LST-GMH-XUTW2-0005 • ANSI/AGMA 9005-E02-R&O ASTM D4304-Type I/Type II • British Standard BS 489:1999 • Chinese Specification GB1120-2011 L-TSA, L-TSE; L-TGA, L-TGE • DIN 51515-1 and 51515-2 • ISO 8068-L-TSA, L-TSE, L-TGA, L-TGE • JIS K-2213 Type II
GST Oil 32, 46, 68, 100
Non-geared industrial steam, gas and combined cycle turbines including rotating machinery and turbo-compressors
Premium base stocks and multi-component oxidation inhibitor system ensures smooth operations with minimal downtime
Alstom HTGD 90117W • Siemens TLV 9013 04 and TLV 9013 05 • MAN Diesel & Turbo 10000494596 rev 2 • Ansaldo Energia Turbine Oil Specification TGO2-0171-E00000/B • British Standard BS 489 • ASTM D4304 Type I • General Electric GEK 28143B, GEK 27070, 32568j, 46506d & e • Siemens MAT 812101 and 812102 • Siemens-Westinghouse M Spec 55125Z3 • Solar Turbines ES 9-224 Class II • JIS K2213 Type 2 • DIN 51515 Part 1, DIN 51515 Part 2 • ISO 8068 L-TSA & L-TGA; L-TGB & L-TGSB • Chinese Specification GB 1120-2011 L-TSA (Type A) and L-TGA; L-TSA (Type B); L-TGSB
* Refer to product data sheet for the most updated approvals and claims
POWER GENERATION
04 / 19
Turbines
Why Caltex Business Solutions
VARTECH™ Solution
Gas and Steam Turbine Plant Products
Reciprocating Engine Products
Customer Testimonials
Ancillary Products
Caltex Reliability-based Program (RbL™)
Product Recommendation by Equipment Type
Table continues on the next page >
Products ISO Viscosity Grade
Application Benefits Claims & Approvals
Specialties
GST Premium
32 Non-geared industrial steam, gas and combined cycle turbines including rotating machinery and turbo-compressors, especially formulated to meet MHPS requirements
Superior oxidation and thermal stability for long service life, with uninterrupted performance due to low varnish formation tendency
Mitsubishi Hitachi Power Systems (MHPS) MS04-MA-CL002/MS04-MA-CL001 • General Electric GEK 32568j, GEK 28143b, GEK 46506e, GEK 27070 • Solar Turbine ES9-224 Class II • ANSI/AGMA 9005-E02-R&O • ASTM D4304-Type I/Type III • British Standard BS 489:1999 • DIN 51515-1 and 51515-2 • ISO 8068-L-TSA and L-TGA • Chinese Specification GB1120-2011 L-TGA and L-TSA (Type A and Type B)
GST 2190 EP 80 Marine geared turbine systems
Extreme pressure characteristics help provide high film strength to protect gears and bearings engaged in heavy-duty service
U.S. Military Specification MIL-PRF-17331L • U.S. Military Specification MIL-PRF-17331K(SH)
Regal SGT 22
22 Aeroderivative gas turbines modified for non-aviation stationary applications
Synthetic polyol ester base fluid andadditive system resists oil breakdown providing extended service life
U.S. Military Specification MIL-PRF-23699F STD • Rolls-Royce RB 211 • Rolls-Royce Industrial Avon • Rolls-Royce (Allison) Industrial 501-K • GE Energy Industrial Aeroderivative Units
* Refer to product data sheet for the most updated approvals and claims
POWER GENERATION
05 / 19
Turbines
Why Caltex Business Solutions
VARTECH™ Solution
Gas and Steam Turbine Plant Products
Reciprocating Engine Products
Customer Testimonials
Ancillary Products
Caltex Reliability-based Program (RbL™)
Product Recommendation by Equipment Type
Protect your Reciprocating Engines for reliable performanceWe work with leading OEMS to formulate low-ash gas engine oils that reduce deposits and corrosive acids – extending service life, streamlining maintenance and minimizing operating costs.
Products Viscosity Grade
Base Number
Application Benefits Claims & Approvals
Stationary Gas Engines
HDAX 9300 SAE 40
SAE 40 6.2 Latest generation high BMEP, low emission 4-stroke engines burning natural gas; especially designed for steel piston engines
Extended drain interval by controlling the formation of carbonaceous deposits on piston and piston rings
INNIO Jenbacher Fuel Class A - Type 9 (all versions) • INNIO Jenbacher Type 4 (Version C), Type 6 (Version F) • Waukesha Engines
HDAX 9200 Low Ash Gas Engine Oil SAE 40
SAE 40 4.2 Latest generation 4-stroke engines running on natural gas for power generation and gas gathering operations
Cleaner engine components help to extend engine life to next overhaul
INNIO Jenbacher Fuel Class A, engine Type 2, 3, 4 (all versions); Type 6 (C, E, F onwards) • Caterpillar Energy Solutions GmbH (former MWM) for CG132, CG170 and CG260 series • Waukesha VGF, VGP series • RMB/EnergieCaterpillar 3500 series
HDAX 5200 Low Ash Gas Engine Oil SAE 40
SAE 40 4.2 4-stroke natural gas and dual fuel engines running on natural gas for power generation and gas gathering operations
Maximizes oil service oil and lowers operating costs
Caterpillar for Cat CG132, CG170, CG260 Gas Engines • Caterpillar G3500, G3600 Series • Caterpillar Energy Solutions GmbH • MWM for TCG 2015, TCG 2020, TCG 2032, TCG 2032B, TCG 3016 Series • Deutz TR 0199-99-01213/2 for 913, 914 series engines • INNIO Jenbacher Type 2 and 3, Type 4 (version C), Type 6 (versions A, B, C, F) • MAN Diesel & Turbo • Wärtsilä gas and duel fuel engines • Waukesha cogeneration applications, 220GL
HDAX 9500 SAE 40
SAE 40 5.4 Latest generation engines running on landfill gas, biogas and digester gas, and sour gas
Extended drain interval, with optimized ash level providing protection against valve recession
INNIO Jenbacher Fuel Class B and C - Type 2 & 3, Type 4 (Ver A & B), Type 6 (Ver C&E) • MWM (Caterpillar Energy Solutions)
HDAX 6500 LFG Gas Engine Oil SAE 40
SAE 40 4.5 Gas engines running on landfill gas, biogas and digester gas, and sour gas
Maximises oil service oil and lowers operating costs
INNIO Jenbacher Fuel Class B and C - Types 2 & 3, Type 4 (Ver A & B and Type 6 (Ver C&E) • MWM Low Ash TCG 2015, TCG 2020, TCG 2032, TCG 2032B, TCG3016 • Cummins QSV91 Landfill Gas Engine • MAN Truck and Bus against M 3271-4 (Special Gas) • Caterpillar CG gas engines • TEDOM for fuel types L (Landfill), B (Biogas) and S (Sewage gas) • Waukesha engines burning landfill gas or biogas • MTU engines
* Refer to product data sheet for the most updated approvals and claims
POWER GENERATION
06 / 19
Reciprocating Engines
Why Caltex Business Solutions
VARTECH™ Solution
Gas and Steam Turbine Plant Products
Reciprocating Engine Products
Customer Testimonials
Ancillary Products
Caltex Reliability-based Program (RbL™)
Product Recommendation by Equipment Type
Table continues on the next page >
Products Viscosity Grade
Base Number
Application Benefits Claims & Approvals
2-Stroke Slow Speed Large Engines
Taro Ultra 20Taro Ultra 40Taro Ultra 70Taro Ultra 100
SAE 50SAE 50SAE 50SAE 50
204070100
Based on base number, for engines burning fuels ranging from < 0.1% sulphur to > 1.5%
Optimized to combat cold corrosion and lower feed rates in two-stroke engines
MAN Energy Solutions • Wintherthur Gas & Diesel (formerly Wartsila Switzerland)
4-Stroke Medium Speed Engines
Taro 20 DP /(X)Taro 30 DP /(X)
SAE 30SAE 40
2030
For engines burning residual fuels with a maximum sulphur level of 4.0%
Wärtsilä • MAN Energy Solution • Daihatsu • Hyundai Himsen • MAK (Caterpillar) • Mitsui • Niigata • Rolls-Royce (Bergen) • Yanmar
Taro 40 XL /(X)Taro 50 XL /(X)Taro 60 XL /(X)
SAE 40 405060
For engines burning residual fuels with a maximum sulphur level of 4.5%
Wärtsilä • MAN Energy Solution • Daihatsu • Hyundai Himsen • MAK (Caterpillar) • Mitsui • Niigata • Rolls-Royce (Bergen) • Yanmar
Delo 1000 Marine
SAE 30SAE 40
12 For engines burning distillate fuels with a maximum sulphur level of 1.5%
Superior engine protection and excellent detergency ensuring cleaner running engines
MAN Energy Solution • Wartsila and MAK (Caterpillar) • Daihatsu • Hyundai Himsen • Rolls-Royce (Bergen) • Yanmar
4-Stroke High Speed Engines
Delo 400 SLK API CK-4
SAE 15W-40
8.5 For heavy duty diesel engines burning diesel fuel up to 0.5% sulphur
Premium quality “low-SAPS” heavy duty diesel engine oil provides outstanding protection, minimizes operating costs
API CK-4, CJ-4, CI-4 PLUS, CI-4, CH-4/SN • ACEA E9 • Caterpillar ECF-3 • Cummins CES 2086 • MAN M 3775 • MTU Category 2.1
Delo Gold Ultra API CI-4
SAE 15W-40 20W-50
10.2 For heavy duty diesel engines burning diesel fuel up to 0.5% sulphur
Superior additive technology provides excellent protection against wear, prolonging engine life and overhaul duration
API CI-4, CH-4/SL • ACEA E7, E5-02 • Caterpillar ECF-1-a • Cummins CES 20078, 77, 76, 72, 71 • MAN M 3275-1 • MTU Category 2 • JASO DH-1
Delo Gold Multigrade API CH-4
SAE 15W-40 20W-50
8 For heavy duty diesel engines burning diesel fuel up to 0.5% sulphur
Balanced additive technology provides overall protection and reduces fleet maintenance costs
API CH-4/SL • ACEA E3-96 • MTU Category 2 • Cummins CES 20071, 72
* Refer to product data sheet for the most updated approvals and claims
POWER GENERATION
07 / 19
Reciprocating Engines
Why Caltex Business Solutions
VARTECH™ Solution
Gas and Steam Turbine Plant Products
Reciprocating Engine Products
Customer Testimonials
Ancillary Products
Caltex Reliability-based Program (RbL™)
Product Recommendation by Equipment Type
See how we made a difference
The Challenge• Safe and reliable engine performance that
enables the textile unit to meet business plans effectively and efficiently
Founded in 1950, Crescent Textile Mills (Crestex) is a vertically integrated composite textile unit in Pakistan. Today, Crestex is known worldwide for its quality, innovation and reliability.
From spinning to stitching, Crestex fulfills its power requirements with a captive power plant equipped with Wärtsilä and INNIO Jenbacher natural gas engines.
The Solution• HDAX® 5200 Low Ash Gas Engine Oil
• Taro® 40 XL 40
Based on Crestex’s specifications for high reliability, Caltex proposed HDAX® 5200 Low Ash Gas Engine Oil for the natural gas reciprocating engine, and Taro® 40 XL 40 as trunk piston engine oil.
The Results• Minimum wear of parts
• Lower operating expenses with reduced lubricant consumption
• Zero unplanned engine shutdown
Both products delivered performances that meet Crestex’s reliability expectations – enabling smooth and reliable power plant operations. Caltex has remained Crestex’s lubricant partner and supplier for over 20 years, supporting Crestex’s continuing excellence in the textiles industry.
HDAX TARO
The Challenge• To keep the electricity flowing under
extreme operating conditions and avoid unplanned shutdowns
The Sycamore Co-generation (Cogen) Power Plant powers thousands of homes and businesses in the southern California desert, where summer temperatures routinely reach 115°F (46°C).
Previously, the plant used lubricating oil that broke down under high temperatures, which caused sludge and varnish deposits. Oil service life was barely 16,000 hours, and expensive turbine components were compromised.
The Solution• GST Advantage™ RO with VARTECH™
Technology Turbine Oil
Caltex Lubrication Specialists worked closely with the plant’s maintenance team and proposed GST Advantage™ RO – a lubricant specifically designed to perform reliably under harsh operating conditions.
The Results• Minimized sludge and deposits throughout
the turbine system
• Lowered associated repair costs
• Optimized uptime until the next major cycle
Sycamore Cogen successfully minimized the threat of unscheduled downtime and turbine failure, with oil service life exceeding expectations. The power plant remained in good shape to reach its next planned outage – in 48,000 hours.
Co-generation Power Plant, Sycamore USA
Crescent Textile Mills, Pakistan
POWER GENERATION
08 / 19
Customer Testimonials
Why Caltex Business Solutions
VARTECH™ Solution
Gas and Steam Turbine Plant Products
Reciprocating Engine Products
Customer Testimonials
Ancillary Products
Caltex Reliability-based Program (RbL™)
Product Recommendation by Equipment Type
Ancillary Products
Products Viscosity Grade
Hydraulic Oils
Rando HDZPremium anti-wear hydraulic oil formulated with premium base oil technology designed for excellent protection while providing energy efficiency relative to traditional hydraulic oils.
ISO 15, 32, 46, 68, 100
Rando HD Designed to give robust protection to hydraulic pumps in mobile and stationary equipment. ISO 100, 220, or 320 are often recommended for hydraulic equipment reduction gears where EP is not required, reciprocating air compressors, plain and anti-friction bearings, and circulating oil systems.
ISO 22, 32, 46, 68, 100, 220, 320
Compressor Oils
Cetus HiPerSYN OilsSynthetic compressor oils primarily recommended for use in stationary, portable, rotary, vane and screw compressors.
ISO 32, 46, 68, 100
Cetus PAOSynthetic air compressor lubricants formulated with PAO base fluids and a high performance additive package.
ISO 32, 46, 68, 100
Coolants
Delo XLC Antifreeze Concentrate/PremixedNon-nitrited extended life anti-freeze/coolant with excellent protection against pitting, corrosion and erosion. Suited for INNIO Jenbacher, Waukesha and MTU engines.
-
Delo XLI Corrosion Inhibitor Concentrate/PremixedEnvironment friendly, nitrite free with unique carboxylate inhibitor technology provides for long service life with excellent heat transfer efficiency. Suitable for INNIO Jenbacher, Waukesha and MTU engines.
-
HDAX ELC Antifreeze/Coolant 40/60Patented carboxylate corrosion inhibitor technology for use in heavy duty stationary natural gas engines that require improved heat transfer performance and long life cooling system protection over a wider range of operating conditions. Suitable for Caterpillar engines.
-
Products Viscosity Grade
Gear Lubricants
Meropa EliteSyn XMHigh performance synthetic industrial gear oil with excellent low temperature properties, approved by Siemens MD (FLENDER) Revision 16.
ISO 150, 220, 320, 460, 680
Meropa XLSynthetic blend, premium industrial gear oil with excellent micropitting wear protection, demulsibility, seal and paint compatibility as required by Siemens MD (FLENDER) Revision 13 approval.
ISO 68, 150, 220, 320, 460, 680
MeropaPremium quality extreme pressure gear oil with excellent load carrying capacity, water demulsibility, oxidation stability and corrosion protection.
ISO 68, 100, 150, 220, 320, 460, 680, 1000
Greases NLGI Grade
Delo Starplex EPAll-purpose Lithium complex EP grease with excellent anti-wear protection and water washout performance, suitable for most on-road and off-road applications.
2, 3
Ultra-Duty EPVersatile, high pressure grease with good adhesive properties designed for a wide variety of automotive and industrial applications.
1, 2
SRI GreasePolyurea grease recommended for use in electric motor anti-friction bearings operating at speeds up to and above 10,000 rpm operating at higher temperatures, or where water or salt water may penetrate bearings.
2
Multifak EP General purpose EP grease for use in industrial equipment under most conditions, except where very high operating temperatures are encountered.
0, 1, 2, 3
Hydraulic Oils
Clarity Hydraulic Oil AWPremium ashless hydraulic oil that provides long oil and equipment life to help prevent varnishing with very low acute aquatic toxicity.
ISO 32, 46, 68, 100
POWER GENERATION
09 / 19
Ancillary Products
Why Caltex Business Solutions
VARTECH™ Solution
Gas and Steam Turbine Plant Products
Reciprocating Engine Products
Customer Testimonials
Ancillary Products
Caltex Reliability-based Program (RbL™)
Product Recommendation by Equipment Type
Reliability-Based Lubrication (RbL™) Program
Our RbL™ Program is designed to help you identify the right products, tools and services to run your equipment and operations better longer.
Our physical presence in local markets, coupled with global expertise, enables us to respond quickly and efficiently to customer needs. Our experienced service engineers tailor solutions to your requirements, while integrating RbL best practices from around the world, so you can achieve optimum operational effectiveness from your plant and machinery.
With our expertise, you can:
improve equipment reliability
optimise equipment performance
extend component life
reduce unexpected failures and downtime
minimize operating costs throughout your organisation
reduce oil usage
You are not just buying Lubricants, you are buying reliability
Click here to find out more about the RbL™ Program.
Watch how a Best-in-Class Assessment from our RbL™ Program can optimize your business.
Above and beyond services such as oil analysis, good inventory management, sharing of best practices and reporting, we go the extra mile by offering you expertise on:
Root cause analysis
Energy reduction
Contamination control
Equipment inspections
Component life extension
Plus special access to advanced trainings
POWER GENERATION
10 / 19
Services
Why Caltex Business Solutions
VARTECH™ Solution
Gas and Steam Turbine Plant Products
Reciprocating Engine Products
Customer Testimonials
Ancillary Products
Caltex Reliability-based Program (RbL™)
Product Recommendation by Equipment Type
Best-in-Class Assessment
Our Caltex Best-in-Class Specialists can help you:
Leverage our expertise with these extra services under the RbL™ Program
1 2 3 4 5Identify the issue
Develop the right solution
Integrate current operations
Execute the RbL program
Monitor and document
Examine current lubrication practices and define current problems
Analyze existing lubrication situation, explore better solutions, and produce a new lubrication plan
Manage changeover from current lubrication plan to new plan
Implement all recommended products, service and solutions
Provide ongoing service and monitoring for optimization
LubeWatch® Oil AnalysisThe lubricants in your systems hold many clues to conditions that can cause premature wear, shortened oil life and potential failures. Let us do the work with LubeWatch® Oil Analysis – where we give you a sampling kit to pull a sample for our lab to analyze. Advanced laboratory processes mean we offer a wide range of specialized testing procedures at cost-effective rates. Our experts will also help you interpret the results with actionable recommendations and put together the right combination of tests for your needs.
Click here to find out more about LubeWatch® Oil Analysis.
POWER GENERATION
11 / 19
Services
Why Caltex Business Solutions
VARTECH™ Solution
Gas and Steam Turbine Plant Products
Reciprocating Engine Products
Customer Testimonials
Ancillary Products
Caltex Reliability-based Program (RbL™)
Product Recommendation by Equipment Type
1
3
2
87
7
61
5
43
8
1. Turbine Oil Reservoir FeedingTurbine Oil• GST Advantage™ RO with
VARTECH™ Technology• GST Advantage™ EP with
VARTECH™ Technology• GST Oil
2. Gas TurbineTurbine Oil• GST Advantage™ RO with
VARTECH™ Technology• GST Advantage™ EP with
VARTECH™ Technology• GST Oil
3. GeneratorGrease• SRI Grease 2• Multifak EP 1, 2 Turbine Oil
4. Steam TurbineTurbine Oil• GST Advantage™ RO with
VARTECH™ Technology• GST Advantage™ EP with
VARTECH™ Technology• GST Oil
5. Boiler Feed Water Pump
Turbine Oil• GST Advantage™ RO with
VARTECH™ Technology• GST OilHydraulic Oil• Rando HDZ• Rando HD
6. Fan Gear BoxGear Oil• Meropa EliteSyn XM• Meropa XL
7. Cooling TowerGear Oil• Meropa EliteSyn XM• Meropa XL
8. Electric MotorsGrease• SRI Grease 2
Protect your operation, inside and out.Chevron has developed advanced lubricants to cover applications throughout your co-generation plant.
POWER GENERATION
12 / 19
Why Caltex Business Solutions
VARTECH™ Solution
Gas and Steam Turbine Plant Products
Reciprocating Engine Products
Customer Testimonials
Ancillary Products
Caltex Reliability-based Program (RbL™)
Product Recommendation by Equipment Type
7
6
4
3
28
9
5
1
Geothermal Turbine
1. Production Well
2. Flash Chambers
3. Condenser
4. Steam TurbineTurbine Oil • GST Advantage™ RO with
VARTECH™ Technology• GST Oil
5. GeneratorGrease• SRI Grease 2• Multifak EP 1, 2 Turbine Oil
6. Cooling Fans Grease• SRI Grease 2• Multifak EP 1, 2
7. Electric MotorGrease • SRI Grease 2
8. Pump
9. Injection Well
POWER GENERATION
13 / 19
Why Caltex Business Solutions
VARTECH™ Solution
Gas and Steam Turbine Plant Products
Reciprocating Engine Products
Customer Testimonials
Ancillary Products
Caltex Reliability-based Program (RbL™)
Product Recommendation by Equipment Type
1
2
3
5
4
1. Reactor Building
2. Steam TurbineTurbine Oil• GST Advantage™ RO with
VARTECH™ Technology• GST Oil
3. Generator Grease• SRI Grease 2• Multifak EP 1, 2 Turbine Oil
4. Cooling Tower
5. Water treatment
Nuclear Power
POWER GENERATION
14 / 19
Why Caltex Business Solutions
VARTECH™ Solution
Gas and Steam Turbine Plant Products
Reciprocating Engine Products
Customer Testimonials
Ancillary Products
Caltex Reliability-based Program (RbL™)
Product Recommendation by Equipment Type
2
3
4 5
12
6 78
9
10
11
1
Coal Power
1. Blower
2. Electrostatic Precipitor
3. ConveyorGrease• Ulti-Plex Synthetic EP• Ultra-Duty
4. Blower
5. PulverizerGear Oil• Meropa EliteSyn XM• Meropa XL
6. BoilerGear Oil• Meropa EliteSyn XM• Meropa XL
7. PumpCompressor Oil• Cetus HiPerSYN• Compressor EP VDL
8. CompressorCompressor Oil• Cetus HiPerSYN• Compressor EP VDL
9. Steam TurbineTurbine Oil• GST Advantage™ RO with
VARTECH™ Technology• GST Oil
10. GeneratorGrease• SRI Grease 2• Multifak EP 1, 2 Turbine Oil
11. PumpCompressor Oil• Cetus HiPerSYN• Compressor EP VDL
12. Reservoir
POWER GENERATION
15 / 19
Why Caltex Business Solutions
VARTECH™ Solution
Gas and Steam Turbine Plant Products
Reciprocating Engine Products
Customer Testimonials
Ancillary Products
Caltex Reliability-based Program (RbL™)
Product Recommendation by Equipment Type
1
1
2
23
3
Hydroelectric: Francis Turbine, Pelton Turbine and Kaplan Turbine
1. Francis TurbineTurbine Oil• GST Advantage™ RO with VARTECH™ Technology• GST Oil
2. Pelton TurbineTurbine Oil• GST Advantage™ RO with VARTECH™ Technology• GST Oil
3. Kaplan TurbineTurbine Oil• GST Advantage™ RO with VARTECH™ Technology• GST Oil
POWER GENERATION
16 / 19
Why Caltex Business Solutions
VARTECH™ Solution
Gas and Steam Turbine Plant Products
Reciprocating Engine Products
Customer Testimonials
Ancillary Products
Caltex Reliability-based Program (RbL™)
Product Recommendation by Equipment Type
12
3
4 5
6
1
5
23
4
6
Heavy Fuel and Gas Reciprocating Power Plant
1. Heavy Fuel Power Plant
2. Cooling FansGrease• SRI Grease 2• Multifak EP 1, 2
3. Silencer
4. EngineEngine Oil• Taro 20, 30 DP• Taro 40, 50, 60 XL
5. Cooling SystemAntifreeze/Coolant• Delo XLC Antifreeze Concentrate/
Premixed• Delo XLI Corrosion Inhibitor Con-
centrate/Premixed• HDAX ELC Antifreeze/Coolant
40/60
6. GeneratorGrease• SRI Grease 2• Multifak EP 1, 2
1. Gas Reciprocating Power Plant
2. EngineGas Engine Oil• HDAX 9300• HDAX 9200, HDAX 5200• HDAX 9500, 6500
3. Cooling SystemAntifreeze/Coolant• Delo XLC Antifreeze Concentrate/
Premixed• Delo XLI Corrosion Inhibitor Con-
centrate/Premixed• HDAX ELC Antifreeze/Coolant
40/60
4. Cooling FansGrease• SRI Grease 2• Multifak EP 1, 2
5. Exhaust Silencer
6. GeneratorGrease• SRI Grease 2• Multifak EP 1, 2
POWER GENERATION
17 / 19
Why Caltex Business Solutions
VARTECH™ Solution
Gas and Steam Turbine Plant Products
Reciprocating Engine Products
Customer Testimonials
Ancillary Products
Caltex Reliability-based Program (RbL™)
Product Recommendation by Equipment Type
1
2
3
Aeroderivative Turbine
1. CompressorTurbine Oil• Regal SGT 22
2. Combustor
3. Power TurbineTurbine Oil• Regal SGT 22
POWER GENERATION
18 / 19
Why Caltex Business Solutions
VARTECH™ Solution
Gas and Steam Turbine Plant Products
Reciprocating Engine Products
Customer Testimonials
Ancillary Products
Caltex Reliability-based Program (RbL™)
Product Recommendation by Equipment Type
For more information, get in touch with your Caltex Sales Representative or visit www.caltex.com/sg/business-solutions.html
© 2021 Chevron. All rights reserved. All trademarks are property of Chevron Intellectual Property LLC or their respective owners.
A Chevron company product