Summary

Updated 4/23/19 to make the Juul easier to get out, and to add a place forthe magnet for the Juul charger so it doesn't get stuck to the metal on thelid.

I can't imagine that anyone else would use this, but in case you use BOTHJuul and Vuse Solo e-cigs, this is a handy way to keep your charged anduncharged units organized in an Altoids tin.

The files contain:

Altoids Red Uncharged_Final.stl --- This is an Altoids insert which has roomfor a Juul (w/o cartridge) and a Vuse Solo (w/o cartridge) as well as thecharger for the Juul and the Vuse. I use this one for my "uncharged" e-cigs.I keep mine in a RED Altoids tin :) NOTE: the little ciruclar hole is for an8x3mm magnet to get glued in so that the top of the Altoid tin doesn'tgrab onto the Juul charger. You can buy those on Amazon, just search for"8x3mm Rare Earth Magnet" they are super cheap.

Altoids Green Charged_Final.stl --- This holds two Juuls and two Vuse Solosw/o the flavor cartridges in them. I keep them in a green/blue tin b/c itswhere I keep my charged ones :D

If anyone else actually prints this and finds it useful please let me knowthat would be rad!

Art & Design > Other Art & Designs

bill de_cat

Vuse Solo and JuulAltoids Insert(Updated)

VIEW IN BROWSER

updated 16. 11. 2019 | published 16. 11. 2019

3D M

ODEL

ONLY

Model Files (.stl, .3mf, .obj, .amf) DOWNLOAD ALL FILES

19.8 KBupdated 16. 11. 2019

23.3 KBupdated 16. 11. 2019

Category: 3D Printing

Find source .stl files on Thingiverse.com

The Author has not uploaded any G-codes.Try to search in User G-codes section or generate and upload yourown.

License

This work is licensed under a Creative Commons (4.0 International License)

Attribution

✖ | Sharing without ATTRIBUTION ✔ | Remix Culture allowed ✔ | Commercial Use ✔ | Free Cultural Works ✔ | Meets Open Definition

altoids_green_charged_final.stl

altoids_red_uncharged_final.stl