DonFale

Tube Mod / MechMod + AccessoireHolder for Backpack

VIEW IN BROWSER

updated 28. 8. 2019 | published 28. 8. 2019

PRUSAPRINTERS

Summary

I transport my Tube Mod in my Backpack and since I don't want it to leakand stand upright in there I made this little Holder.

I simply put it inside a Side pocket ob my Backpack and don't need toworry anymore.

In this "Stand" you can put a Tube Mod with a Diameter up to 30mm. Inthe smaller Compartments, there is Place for 2 18650 Batterys or one18650 Battery and a small Unicorn Liquid Bottle.

I've designed two covers for the "Stand" so you can Cover the Battery anddon't need to worry about a short.

If you want you to glue a little bit of foam inside of the chambers so itdoesn't rattle and keeps the stuff stored snug to the holder.

Gadgets > Other Gadgets

dampfe dampf ecig liquid vape vaping tube mod

mech 18650

3D M

ODEL

ONLY

Model Files (.stl, .3mf, .obj, .amf) DOWNLOAD ALL FILES

450.4 KBupdated 28. 8. 2019

119.4 KBupdated 28. 8. 2019

170.6 KBupdated 28. 8. 2019

The Author has not uploaded any G-codes.Try to search in User G-codes section or generate and upload yourown.

License

This work is licensed under a Creative Commons (4.0 International License)

Attribution-ShareAlike

✖ | Sharing without ATTRIBUTION ✔ | Remix Culture allowed ✔ | Commercial Use

fush-holder-with-pegs.stl

fush-cover-without-openings.stl

fush-cover-with-opening.stl

✔ | Free Cultural Works ✔ | Meets Open Definition