y manta ray face shield v6 (prusa + 3dverkstan remix) · it's called "manta ray"...
TRANSCRIPT
Summary
It's called "Manta Ray" because I asked my kids what it looked like, andRylee said, "it looks kind of like a manta ray."
EDIT 6/19/2020: Added a "mouse ears" version. There are little circles atthe ends that help hold it down.
EDIT 4/8/2020: Added V6 E2S (Easier To Stack). There is "Full" and "Open".Full has the visor without the opening near the forehead, with Openmaking the opening go all the way through the model.
EDIT 4/5/2020: Added V5, which gives the front part that holds the shieldmaterial a slightly larger base, which will help with adhesion to the buildplate.
I know there are A LOT of face mask models out there right now. A LOT.That's great. I love what Prusa and his company have done and put forth -BUT - I also very much love what Erik Cederberg and the 3DVerkstan havedone too. I like parts from both models - maybe I could squish themtogether?
So, I did.
I used the Prusa front - you know, the continuous cruved surface that holdsface shield material well. I used the USA version, which has pegs for asingle 3-hole punch.
3 3D Printing Nerd
Manta Ray FaceShield V6 (Prusa +3DVerkstan remix)
VIEW IN BROWSER
updated 20. 6. 2020 | published 20. 6. 2020
3D M
ODEL
ONLY
Model Files (.stl, .3mf, .obj, .amf) DOWNLOAD ALL FILES
290.7 KBupdated 5. 4. 2020
254.5 KBupdated 8. 4. 2020
295.0 KBupdated 9. 4. 2020
I used the 3DVerkstan arms - you know, the sloped arms that hold thevisor to your head without the need for elastic of any sort, but give youattachment points if you DO want to use it.
I remixed those two models to get this. It holds to the face without elastic,and it takes a single 3-hole punch without the need to swap, or flip, orpunch twice.
Healthcare > Accessibility
ppe faceshield
Print in whatever material you like.
Favor more shells over infill.
I used 0.3mm layers
This remix is based on
Prusa Face Shield - US version
by Prusa Research
prusa-3dverkstan-remix-v5.stl
prusa-3dverkstan-remix-v6-e2s-full.stl
prusa-3dverkstan-remix-v6-e2s-open.stl
431.3 KBupdated 20. 6. 2020
Find source .stl files on Thingiverse.com
The Author has not uploaded any print files.Try to search in User print files section or generate and upload yourown.
License
This work is licensed under a Creative Commons (4.0 International License)
Attribution—Noncommercial—Share Alike
✖ | Sharing without ATTRIBUTION ✔ | Remix Culture allowed ✖ | Commercial Use ✖ | Free Cultural Works ✖ | Meets Open Definition
prusa-3dverkstan-remix-v5-with-mouse-ears.stl