Summary

This is all the nuts, bolts and dowels (Sleeves) required for the Minifig TPHolder found here:

http://www.thingiverse.com/thing:1277045

Edit: 12 June 2017

Experience has taught me the following:

1. Use the 140 mm long sleeve I have just uploaded. 145 mm is slightlytoo long. Print this at 1.01 times the size of the .STL here

c colin.j.haynes@gmail.com

Dowel, nuts andbolts for Minifig TPHolder

VIEW IN BROWSER

updated 4. 11. 2019 | published 4. 11. 2019

3D M

ODEL

ONLY

Model Files (.stl, .3mf, .obj, .amf) DOWNLOAD ALL FILES

4.3 MBupdated 3. 11. 2019

6.6 MBupdated 3. 11. 2019

1.4 MBupdated 3. 11. 2019

1.3 MBupdated 3. 11. 2019

2. Use the 45 mm long bolts and size/print them at 0.99 times the sizeof the .STL files here

3. If at all possible, use PETG or ABS for the 45 mm bolts as thy needmore strength than PLA prints I leave all the other files here in caseanyone wants to use them instead. Enjoy. All created as customisedversions of Nut Job http://www.thingiverse.com/thing:193647

Household > Bathroom

toiletpaperholder minifig lego

Category: Bathroom Print Settings

Printer: Velleman K8200

Rafts: No

Supports: No

bolt_75mm_long_24mm_dia.stl

rod_130mm_long_24mm_wide.stl

wingnut_25mm_dia.stl

nut_246mm_diameter.stl

8.1 MBupdated 3. 11. 2019

120.2 KBupdated 3. 11. 2019

2.8 MBupdated 3. 11. 2019

8.1 MBupdated 3. 11. 2019

Find source .stl files on Thingiverse.com

The Author has not uploaded any G-codes.Try to search in User G-codes section or generate and upload yourown.

License

This work is licensed under a Creative Commons (4.0 International License)

Attribution

✖ | Sharing without ATTRIBUTION ✔ | Remix Culture allowed ✔ | Commercial Use ✔ | Free Cultural Works ✔ | Meets Open Definition

sleeve_145mm_long.stl

washer_2mm_thick_38mm_external_dia_25mm_internal_.st

bolt_45mm_long_head_30mm_wide_10mm_deep.stl

140mm_25mm_35mm_60_facets_sleeve.stl