Event Source Severity1 Messaging Success2 Messaging Success3 Messaging Success4 Messaging Success5 Messaging Success6 Messaging Success7 Messaging Success8 Messaging Success9 Messaging Success

10 Messaging Success11 Messaging Success12 Messaging Success13 Messaging Success14 Messaging Success15 Messaging Success16 Messaging Success17 Messaging Success18 Messaging Success19 Messaging Success20 Messaging Success21 Messaging Success22 Messaging Success23 Messaging Success24 Messaging Success25 Messaging Success26 Messaging Success27 Messaging Success28 Messaging Success29 Messaging Success30 Messaging Success31 Messaging Success32 Messaging Success33 Messaging Success34 Messaging Success35 Messaging Success36 Messaging Success37 Messaging Success38 Messaging Success39 Messaging Success40 Messaging Success41 Messaging Success42 Messaging Success43 Messaging Success44 Messaging Success45 Messaging Success46 Messaging Success47 Messaging Success

48 Messaging Success49 Messaging Success50 Messaging Success51 Messaging Success52 Messaging Success53 Messaging Success54 Messaging Success55 Messaging Success56 Messaging Success57 Messaging Success58 Messaging Success59 Messaging Success60 Messaging Success61 Messaging Success62 Messaging Success63 Messaging Success64 Messaging Success65 Messaging Success66 Messaging Success67 Messaging Success68 Messaging Success69 Messaging Success70 Messaging Success71 Messaging Success72 Messaging Success73 Messaging Success74 Messaging Success75 Messaging Success76 Messaging Success77 Messaging Success78 Messaging Success79 Messaging Success80 Messaging Success81 Messaging Success82 Messaging Success83 Messaging Success84 Messaging Success85 Messaging Success86 Messaging Success87 Messaging Success88 Messaging Success89 Messaging Success90 Messaging Success91 Messaging Success92 Messaging Success93 Messaging Success94 Messaging Success95 Messaging Success

96 Messaging Success97 Messaging Success98 Messaging Success99 Messaging Success

100 Messaging Success101 Messaging Success102 Messaging Success103 Messaging Success104 Messaging Success105 Messaging Success106 Messaging Success107 Messaging Success108 EV Success109 EV Success110 EV Success111 EV Success112 EV Success113 EV Success114 EV Success115 EV Success116 EV Success117 EV Success118 EV Success119 EV Success120 EV Success121 EV Success122 EV Success123 EV Success124 EV Success125 EV Success126 EV Success127 EV Success128 EV Success129 EV Success130 EV Success

2176 Agent Error2177 Agent Warning2178 Agent Success2179 Agent Success2180 Agent Success2181 Agent Success2182 Agent Success2183 Agent Success2184 Agent Error2185 Agent Error2186 Agent Error2187 Agent Error2188 Agent Error

2189 Agent Error2190 Agent Error2191 Agent Error2192 Agent Information2193 Agent Information2194 Agent Information2195 Agent Error2196 Agent Error2197 Agent Error2198 Agent Error2199 Agent Error2200 Agent Error2201 Agent Error2202 Agent Error2203 Agent Error2204 Agent Error2205 Agent Error2206 Agent Error2207 Agent Error2208 Agent Error2209 Agent Critical Error2210 Agent Critical Error2211 Agent Error2212 Agent Error2213 Agent Information2214 Agent Critical Error2215 Agent Error2216 Agent Critical Warning2217 Agent Information2218 Agent Information2219 Agent Information2220 Agent Information2221 Agent Information2222 Agent Information2223 Agent Error2224 Agent Error2225 Agent Information2226 Agent Error2227 Agent Warning2228 Agent Error2229 Agent Error2230 Agent Error2231 Agent Error2232 Agent Information2233 Agent Information2234 Agent Information2235 Agent Error2236 Agent Error

2237 Agent Warning2238 Agent Error2239 Agent Error2240 Agent Error2241 Agent Error2242 Agent Warning2243 Agent Error2244 Agent Error2245 Agent Error2246 Agent Critical Error2247 Agent Critical Error2248 Agent Error2249 Agent Critical Error2250 Agent Critical Error2251 Agent Critical Error2252 Agent Critical Error2253 Agent Warning2254 Agent Information2255 Agent Error2256 Agent Critical Error2257 Agent Critical Error2258 Agent Critical Error2259 Agent Critical Error2260 Agent Error2261 Agent Error2262 Agent Critical Error2263 Agent Error2264 Agent Error2265 Agent Error2266 Agent Error2267 Agent Error2268 Agent Error2269 Agent Error2270 Agent Error2271 Agent Error2272 Agent Error2273 Agent Error2274 Agent Error2275 Agent Error2276 Agent Critical Error2277 Agent Error2278 Agent Error2279 Agent Error2280 Agent Error2281 Agent Error2282 Agent Error2283 Agent Error2284 Agent Error

2285 Agent Error2286 Agent Error2287 Agent Error2288 Agent Error2289 Agent Error2290 Agent Error2291 Agent Error2292 Agent Error2293 Agent Error2294 Agent Error2295 Agent Error2296 Agent Error2297 Agent Error2298 Agent Error2299 Agent Error2300 Agent Error2301 Agent Error2302 Agent Error2303 Agent Error2304 Agent Critical Error2305 Agent Error2306 Agent Error2307 Agent Warning2308 Agent Error2309 Agent Error2310 Agent Error2311 Agent Error2312 Agent Error2313 Agent Information2314 Agent Information2315 Agent Information2316 Agent Information2317 Agent Information2318 Agent Information2319 Agent Information2320 Agent Information2321 Agent Information2322 Agent Information2323 Agent Information2324 Agent Information2325 Agent Information2326 Agent Information2327 Agent Information2328 Agent Information2329 Agent Information2330 Agent Information2331 Agent Information2332 Agent Information

2333 Agent Information2334 Agent Information2335 Agent Information2336 Agent Information2337 Agent Information2338 Agent Information2339 Agent Information2340 Agent Information2341 Agent Information2342 Agent Information2343 Agent Information2344 Agent Information2345 Agent Information2346 Agent Information2347 Agent Information2348 Agent Information2349 Agent Information2350 Agent Information2351 Agent Information2352 Agent Information2353 Agent Information2354 Agent Information2355 Agent Information2356 Agent Information2357 Agent Information2358 Agent Information2359 Agent Information2360 Agent Information2361 Agent Information2362 Agent Information2363 Agent Information2364 Agent Information2365 Agent Information2366 Agent Information2367 Agent Information2368 Agent Information2369 Agent Information2370 Agent Information2371 Agent Information2372 Agent Information2373 Agent Information2374 Agent Information2375 Agent Information2376 Agent Information2377 Agent Information2378 Agent Information2379 Agent Information2380 Agent Information

2381 Agent Information2382 Agent Information2383 Agent Information2384 Agent Information2385 Agent Information2386 Agent Information2387 Agent Information2388 Agent Information2389 Agent Information2390 Agent Information2391 Agent Information2392 Agent Information2393 Agent Information2394 Agent Information2395 Agent Information2396 Agent Information2397 Agent Information2398 Agent Information2399 Agent Information2400 Agent Information2401 Agent Information2402 Agent Information2403 Agent Information2404 Agent Information2405 Agent Information2406 Agent Information2407 Agent Information2408 Agent Information2409 Agent Information2410 Agent Information2411 Agent Information2412 Agent Information2413 Agent Information2414 Agent Information2415 Agent Information2416 Agent Information2417 Agent Information2418 Agent Information2419 Agent Information2420 Agent Information2421 Agent Information2422 Agent Information2423 Agent Information2424 Agent Information2425 Agent Information2426 Agent Information2427 Agent Information2428 Agent Information

2429 Agent Information2430 Agent Information2431 Agent Information2432 Agent Information2433 Agent Information2434 Agent Information2435 Agent Information2436 Agent Information2437 Agent Information2438 Agent Information2439 Agent Information2440 Agent Information2441 Agent Information2442 Agent Information2443 Agent Information2444 Agent Information2445 Agent Information2446 Agent Information2447 Agent Information2448 Agent Information2449 Agent Information2450 Agent Information2451 Agent Information2452 Agent Information2453 Agent Information2454 Agent Information2455 Agent Information2456 Agent Information2457 Agent Information2458 Agent Information2459 Agent Information2460 Agent Information2461 Agent Information2462 Agent Information2463 Agent Information2464 Agent Information2465 Agent Information2466 Agent Information2467 Agent Information2468 Agent Information2469 Agent Information2470 Agent Information2471 Agent Information2472 Agent Information2473 Agent Information2474 Agent Information2475 Agent Information2476 Agent Information

2477 Agent Information2478 Agent Information2479 Agent Information2480 Agent Information2481 Agent Information2482 Agent Information2483 Agent Information2484 Agent Information2485 Agent Information2486 Agent Information2487 Agent Information2488 Agent Information2489 Agent Information2490 Agent Information2491 Agent Information2492 Agent Information2493 Agent Information2494 Agent Information2495 Agent Information2496 Agent Information2497 Agent Information2498 Agent Information2499 Agent Information2500 Agent Information2501 Agent Information2502 Agent Information2503 Agent Information2504 Agent Information2505 Agent Information2506 Agent Information2507 Agent Information2508 Agent Information2509 Agent Information2510 Agent Information2511 Agent Information2512 Agent Information2513 Agent Information2514 Agent Information2515 Agent Information2516 Agent Information2517 Agent Information2518 Agent Information2519 Agent Information2520 Agent Information2521 Agent Information2522 Agent Information2523 Agent Information2524 Agent Information

2525 Agent Information2526 Agent Information2527 Agent Information2528 Agent Information2529 Agent Information2530 Agent Information2531 Agent Information2532 Agent Information2533 Agent Information2534 Agent Information2535 Agent Information2536 Agent Information2537 Agent Information2538 Agent Information2539 Agent Information2540 Agent Information2541 Agent Information2542 Agent Information2543 Agent Information2544 Agent Information2545 Agent Information2546 Agent Information2547 Agent Information2548 Agent Information2549 Agent Information2550 Agent Information2551 Agent Information2552 Agent Information2553 Agent Information2554 Agent Information2555 Agent Information2556 Agent Information2557 Agent Information2558 Agent Information2559 Agent Information2560 Agent Information2561 Agent Information2562 Agent Information2563 Agent Information2564 Agent Information2565 Agent Information2566 Agent Information2567 Agent Information2568 Agent Information2569 Agent Information2570 Agent Information2571 Agent Information2572 Agent Information

2573 Agent Information2574 Agent Information2575 Agent Information2576 Agent Information2577 Agent Information2578 Agent Information2579 Agent Information2580 Agent Information2581 Agent Information2582 Agent Information2583 Agent Information2584 Agent Information2585 Agent Information2586 Agent Information2587 Agent Information2588 Agent Information2589 Agent Information2590 Agent Information2591 Agent Information2592 Agent Information2593 Agent Information2594 Agent Information2595 Agent Information2596 Agent Information2597 Agent Information2598 Agent Information2599 Agent Information2600 Agent Information2601 Agent Information2602 Agent Information2603 Agent Information2604 Agent Information2605 Agent Information2606 Agent Information2607 Agent Information2608 Agent Information2609 Agent Information2610 Agent Information2611 Agent Information2612 Agent Information2613 Agent Information2614 Agent Information2615 Agent Information2616 Agent Information2617 Agent Information2618 Agent Information2619 Agent Information2620 Agent Information

2621 Agent Information2622 Agent Information2623 Agent Information2624 Agent Information2625 Agent Information2626 Agent Information2627 Agent Information2628 Agent Information2629 Agent Information2630 Agent Information2631 Agent Information2632 Agent Information2633 Agent Information2634 Agent Information2635 Agent Information2636 Agent Information2637 Agent Information2638 Agent Information2639 Agent Information2640 Agent Information2641 Agent Information2642 Agent Information2643 Agent Information2644 Agent Information2645 Agent Information2646 Agent Information2647 Agent Information2648 Agent Information2649 Agent Information2650 Agent Information2651 Agent Information2652 Agent Information2653 Agent Information2654 Agent Information2655 Agent Information2656 Agent Information2657 Agent Information2658 Agent Information2659 Agent Information2660 Agent Information2661 Agent Information2662 Agent Information2663 Agent Information2664 Agent Information2665 Agent Information2666 Agent Information2667 Agent Information2668 Agent Information

2669 Agent Information2670 Agent Information2671 Agent Information2672 Agent Information2673 Agent Information2674 Agent Information2675 Agent Information2676 Agent Information2677 Agent Information2678 Agent Information2679 Agent Information2680 Agent Information2681 Agent Information2682 Agent Information2683 Agent Information2684 Agent Information2685 Agent Information2686 Agent Information2687 Agent Information2688 Agent Information2689 Agent Information2690 Agent Information2691 Agent Information2692 Agent Information2693 Agent Information2694 Agent Information2695 Agent Information2696 Agent Information2697 Agent Information2698 Agent Information2699 Agent Information2700 Agent Information2701 Agent Information2702 Agent Information2703 Agent Information2704 Agent Information2705 Agent Information2706 Agent Information2707 Agent Information2708 Agent Information2709 Agent Information2710 Agent Information2711 Agent Information2712 Agent Information2713 Agent Information2714 Agent Information2715 Agent Information2716 Agent Information

2717 Agent Information2718 Agent Information2719 Agent Information2720 Agent Information2721 Agent Information2722 Agent Information2723 Agent Information2724 Agent Information2725 Agent Information2726 Agent Information2727 Agent Information2728 Agent Information2729 Agent Error2730 Agent Error2731 Agent Error2732 Agent Error2733 Agent Error2734 Agent Error2735 Agent Error2736 Agent Error2737 Agent Critical Error2738 Agent Error2739 Agent Error2740 Agent Error2741 Agent Error2742 Agent Information2743 Agent Information2744 Agent Error2745 Agent Error2746 Agent Warning2747 Agent Warning2748 Agent Critical Error2749 Agent Critical Error2750 Agent Critical Error2751 Agent Critical Error2752 Agent Error2753 Agent Critical Error2754 Agent Critical Error2755 Agent Error2756 Agent Error2757 Agent Critical Error2758 Agent Error2759 Agent Error2760 Agent Error2761 Agent Error2762 Agent Error2763 Agent Error2764 Agent Error

2765 Agent Error2766 Agent Warning2767 Agent Warning2768 Agent Error2769 Agent Error2770 Agent Error2771 Agent Error2772 Agent Error2773 Agent Error2774 Agent Error2775 Agent Error2776 Agent Error2777 Agent Warning2778 Agent Warning2779 Agent Error2780 Agent Error2781 Agent Error2782 Agent Error2783 Agent Error2784 Agent Error2785 Agent Error2786 Agent Error2787 Agent Error2788 Agent Warning2789 Agent Information2790 Agent Error2791 Agent Error2792 Agent Information2793 Agent Information2794 Agent Warning2795 Agent Error2796 Agent Error2797 Agent Error2798 Agent Error2799 Agent Error2800 Agent Error2801 Agent Error2802 Agent Error2803 Agent Warning2804 Agent Warning2805 Agent Warning2806 Agent Warning2807 Agent Warning2808 Agent Warning2809 Agent Warning2810 Agent Warning2811 Agent Warning2812 Agent Warning

2813 Agent Warning2814 Agent Warning2815 Agent Warning2816 Agent Warning2817 Agent Warning2818 Agent Warning2819 Agent Warning2820 Agent Warning2821 Agent Warning2822 Agent Error2823 Agent Critical Error2824 Agent Information2825 Agent Information2826 Agent Information2827 Agent Information2828 Agent Information2829 Agent Information2830 Agent Information2831 Agent Information2832 Agent Error2833 Agent Information2834 Agent Warning2835 Agent Warning2836 Agent Error2837 Agent Information2838 Agent Information2839 Agent Error2840 Agent Warning2841 Agent Error2842 Agent Error2843 Agent Warning2844 Agent Warning2845 Agent Warning2846 Agent Warning2847 Agent Information2848 Agent Information2849 Agent Information2850 Agent Error2851 Agent Critical Error2852 Agent Error2853 Agent Critical Error2854 Agent Critical Error2855 Agent Error2856 Agent Error2857 Agent Information2858 Agent Information2859 Agent Information2860 Agent Information

2861 Agent Information2862 Agent Information2863 Agent Error2864 Agent Error2865 Agent Error2866 Agent Error2867 Agent Error2868 Agent Error2869 Agent Warning2870 Agent Warning2871 Agent Information2872 Agent Error2873 Agent Error2874 Agent Error2875 Agent Error2876 Agent Error2877 Agent Error2878 Agent Error2879 Agent Warning2880 Agent Warning2881 Agent Warning2882 Agent Warning2883 Agent Information2884 Agent Information2885 Agent Information2886 Agent Information2887 Agent Information2888 Agent Information2889 Agent Information2890 Agent Information2891 Agent Information2892 Agent Information2893 Agent Information2894 Agent Information2895 Agent Information2896 Agent Information2897 Agent Information2898 Agent Information2899 Agent Information2900 Agent Information2901 Agent Information2902 Agent Information2903 Agent Information2904 Agent Information2905 Agent Information2906 Agent Information2907 Agent Information2908 Agent Information

2909 Agent Error2910 Agent Error2911 Agent Error2912 Agent Error2913 Agent Error2914 Agent Error2915 Agent Error2916 Agent Information2917 Agent Information2918 Agent Information2919 Agent Information2920 Agent Information2921 Agent Information2922 Agent Information2923 Agent Information2924 Agent Information2925 Agent Information2926 Agent Information2927 Agent Information2928 Agent Warning2929 Agent Information2930 Agent Information2931 Agent Information2932 Agent Information2933 Agent Error2934 Agent Error2935 Agent Error2936 Agent Warning2937 Agent Information2938 Agent Information2939 Agent Information2940 Agent Information2941 Agent Information2942 Agent Information2943 Agent Information2944 Agent Information2945 Agent Information2946 Agent Error2947 Agent Success2948 Agent Success2949 Agent Critical Error2950 Agent Information2951 Agent Information2952 Agent Error2953 Agent Information2954 Agent Information2955 Agent Error2956 Agent Error

2957 Agent Information2958 Agent Information2959 Agent Information2960 Agent Information2961 Agent Information2962 Agent Information2963 Agent Information2964 Agent Information2965 Agent Information2966 Agent Information2967 Agent Information2968 Agent Information2969 Agent Information2970 Agent Information2971 Agent Information2972 Agent Information2973 Agent Information2974 Agent Error2975 Agent Warning2976 Agent Warning2977 Agent Information2978 Agent Information2979 Agent Error2980 Agent Error2981 Agent Error2982 Agent Information2983 Agent Information2984 Agent Error2985 Agent Information2986 Agent Information2987 Agent Information2988 Agent Error2989 Agent Error2990 Agent Information2991 Agent Information2992 Agent Information2993 Agent Information2994 Agent Information2995 Agent Information2996 Agent Information2997 Agent Information2998 Agent Information2999 Agent Information3000 Agent Information3001 Agent Information3002 Agent Error3003 Agent Information3004 Agent Information

3005 Agent Information3006 Agent Error3007 Agent Error3008 Agent Error3009 Agent Information3010 Agent Error3011 Agent Information3012 Agent Error3013 Agent Error3014 Agent Information3015 Agent Information3016 Agent Information3017 Agent Information3018 Agent Information3019 Agent Information3020 Agent Information3021 Agent Error3022 Agent Error3023 Agent Error3024 Agent Information3025 Agent Information3026 Agent Information3027 Agent Critical Error3028 Agent Error3029 Agent Information3030 Agent Information3031 Agent Warning3032 Agent Warning3033 Agent Warning3034 Agent Warning3035 Agent Error3036 Agent Error3037 Agent Error3038 Agent Critical Error3039 Agent Critical Error3040 Agent Critical Error3041 Agent Critical Error3042 Agent Warning3043 Agent Warning3044 Agent Information3045 Agent Error3046 Agent Error3047 Agent Error3048 Agent Error3049 Agent Warning3050 Agent Error3051 Agent Information3052 Agent Information

3053 Agent Warning3054 Agent Warning3055 Agent Error3056 Agent Error3057 Agent Information3058 Agent Information3059 Agent Information3060 Agent Information3061 Agent Information3062 Agent Information3063 Agent Information3064 Agent Information3065 Agent Information3066 Agent Information3067 Agent Error3068 Agent Error3069 Agent Information3070 Agent Warning3071 Agent Error3072 Agent Warning3073 Agent Information3074 Agent Information3075 Agent Error3076 Agent Information3077 Agent Critical Error3078 Agent Critical Error3079 Agent Critical Error3080 Agent Critical Error3081 Agent Error3082 Agent Information3083 Agent Information3084 Agent Information3085 Agent Information3086 Agent Information3087 Agent Critical Error3088 Agent Error3089 Agent Information3090 Agent Error3091 Agent Information3092 Agent Information3093 Agent Information3094 Agent Information3095 Agent Information3096 Agent Information3097 Agent Information3098 Agent Information3099 Agent Information3100 Agent Information

3101 Agent Error3102 Agent Information3103 Agent Error3104 Agent Error3105 Agent Error3106 Agent Error3107 Agent Information3108 Agent Information3109 Agent Information3110 Agent Information3111 Agent Error3112 Agent Error3113 Agent Information3114 Agent Information3115 Agent Error3116 Agent Error3117 Agent Error3118 Agent Information3119 Agent Error3120 Agent Warning3121 Agent Error3122 Agent Information3123 Agent Error3124 Agent Information3125 Agent Error3126 Agent Information3127 Agent Information3128 Agent Information3129 Agent Error3130 Agent Error3131 Agent Error3132 Agent Warning3133 Agent Error3134 Agent Error3135 Agent Error3136 Agent Error3137 Agent Error3138 Agent Error3139 Agent Error3140 Agent Error3141 Agent Error3142 Agent Error3143 Agent Error3144 Agent Critical Error3145 Agent Error3146 Agent Error3147 Agent Error3148 Agent Error

3149 Agent Error3150 Agent Critical Error3151 Agent Error3152 Agent Warning3153 Agent Error3154 Agent Error3155 Agent Information3156 Agent Information3157 Agent Information3158 Agent Information3159 Agent Information3160 Agent Information3161 Agent Information3162 Agent Warning3163 Agent Error3164 Agent Error3165 Agent Error3166 Agent Warning3167 Agent Warning3168 Agent Warning3169 Agent Warning3170 Agent Error3171 Agent Error3172 Agent Error3173 Agent Error3174 Agent Error3175 Agent Error3176 Agent Error3177 Agent Error3178 Agent Error3179 Agent Warning3180 Agent Warning3181 Agent Warning3182 Agent Warning3183 Agent Information3184 Agent Information3185 Agent Information3186 Agent Information3187 Agent Error3188 Agent Error3189 Agent Warning3190 Agent Warning3191 Agent Warning3192 Agent Error3193 Agent Error3194 Agent Warning3195 Agent Error3196 Agent Error

3197 Agent Information3198 Agent Error3199 Agent Information3200 Agent Warning3201 Agent Warning3202 Agent Information3203 Agent Information3204 Agent Information3205 Agent Information3206 Agent Information3207 Agent Information3208 Agent Information3209 Agent Error3210 Agent Error3211 Agent Error3212 Agent Error3213 Agent Error3214 Agent Error3215 Agent Warning3216 Agent Warning3217 Agent Warning3218 Agent Error3219 Agent Error3220 Agent Error3221 Agent Warning3222 Agent Information3223 Agent Error3224 Agent Error3225 Agent Error3226 Agent Error3227 Agent Warning3228 Agent Error3229 Agent Critical Warning3230 Agent Error3231 Agent Critical Error3232 Agent Warning3233 Agent Error3234 Agent Error3235 Agent Error3236 Agent Information3237 Agent Error3238 Agent Information3239 Agent Error3240 Agent Information3241 Agent Error3242 Agent Error3243 Agent Error3244 Agent Warning

3245 Agent Warning3246 Agent Warning3247 Agent Warning3248 Agent Warning3249 Agent Warning3250 Agent Warning3251 Agent Warning3252 Agent Information3253 Agent Information3254 Agent Warning3255 Agent Error3256 Agent Error3257 Agent Warning3258 Agent Error3259 Agent Warning3260 Agent Error3261 Agent Warning3262 Agent Error3263 Agent Error3264 Agent Warning3265 Agent Warning3266 Agent Warning3267 Agent Warning3268 Agent Warning3269 Agent Warning3270 Agent Warning3271 Agent Information3272 Agent Information3273 Agent Information3274 Agent Error3275 Agent Error3276 Agent Error3277 Agent Error3278 Agent Error3279 Agent Error3280 Agent Error3281 Agent Error3282 Agent Information3283 Agent Warning3284 Archiving Critical Error3285 Agent Warning3286 Agent Warning3287 Agent Warning3288 Agent Warning3289 Agent Critical Information3290 Agent Critical Information3291 Agent Warning3292 Agent Warning

3293 Agent Error3294 Agent Critical Success3295 Agent Critical Success3296 EV Critical Success3297 EV Critical Success3298 EV Critical Success3299 EV Critical Success3300 EV Critical Error3301 EV Critical Error3302 EV Error3303 EV Information3304 EV Information3305 EV Critical Error3306 EV Warning3307 EV Error3308 EV Warning3309 EV Error3310 EV Error3311 EV Critical Information3312 EV Critical Error3313 EV Critical Error3314 EV Critical Warning3315 EV Warning3316 EV Information3317 EV Error3318 EV Error3319 EV Error3320 EV Critical Error3321 EV Error3322 EV Warning3323 EV Information3324 EV Error3325 EV Error3326 EV Error3327 EV Error3328 EV Error3329 EV Critical Error3330 EV Error3331 EV Information3332 EV Warning3333 EV Error3334 EV Error3335 EV Information3336 EV Information3337 EV Warning3338 EV Warning3339 EV Error3340 EV Error

3341 EV Error3342 EV Error3343 EV Information3344 EV Information3345 EV Information3346 EV Information3347 EV Error3348 EV Warning3349 EV Warning3350 EV Information3351 EV Information3352 EV Error3353 EV Warning3354 EV Error3355 EV Error3356 EV Warning3357 EV Warning3358 EV Error3359 EV Warning3360 EV Critical Error3361 EV Warning3362 EV Warning3363 EV Warning3364 EV Warning3365 EV Error3366 EV Error3367 EV Warning3368 EV Error3369 EV Warning3370 EV Error3371 EV Error3372 EV Warning3373 EV Error3374 EV Error3375 EV Warning3376 EV Error3377 EV Error3378 EV Warning3379 EV Warning3380 EV Error3381 EV Error3382 EV Warning3383 EV Warning3384 EV Warning3385 EV Error3386 EV Error3387 EV Error3388 EV Error

3389 EV Error3390 EV Error3391 EV Critical Error3392 EV Error3393 EV Error3394 EV Error3395 EV Error3396 EV Error3397 EV Error3398 EV Error3399 EV Error3400 EV Error3401 EV Warning3402 EV Warning3403 EV Error3404 EV Error3405 EV Error3406 EV Error3407 EV Error3408 EV Warning3409 EV Error3410 EV Critical Error4096 Admin Error4097 Admin Error4098 Admin Error4099 Admin Warning4100 Admin Information4101 Admin Error4102 Admin Information4103 Admin Error4104 Admin Error4105 Admin Error4106 Admin Error4107 Admin Error4108 Admin Error4109 Admin Information4110 Admin Critical Information4111 Admin Critical Information4112 Admin Error4113 Admin Error4114 Admin Error4115 Admin Information4116 Admin Error4117 Admin Information4118 Admin Error4119 Admin Error4120 Admin Warning4121 Admin Information

4122 Admin Warning4123 Admin Warning4124 Admin Information4125 Admin Information4126 Admin Warning4127 Admin Warning4128 Admin Warning4129 Admin Error4130 Admin Error4131 Admin Information4132 Admin Information4133 Admin Information4134 Admin Error4135 Admin Error4136 Admin Error4137 Admin Information4138 Admin Information4139 Admin Error4140 Admin Critical Error4141 Admin Critical Error4142 Admin Critical Error4143 Admin Critical Error4144 Admin Critical Warning4145 Admin Critical Warning4146 Admin Critical Warning4147 Admin Critical Warning4148 Admin Warning4149 Admin Warning4150 Admin Warning4151 Admin Warning4152 Admin Information4153 Admin Error4154 Admin Error4155 Admin Error4156 Admin Error4157 Admin Information4158 Admin Warning4159 Admin Warning4160 Admin Warning4161 Admin Warning4162 Admin Error4163 Admin Error4164 Admin Error4165 Admin Error4166 Admin Critical Error4167 Admin Error4168 Admin Error4169 Admin Error

4170 Admin Error4171 Admin Error4172 Admin Error4173 Admin Error4174 Admin Error4175 Admin Error4176 Admin Error4177 Admin Error4178 Admin Error4179 Admin Error4180 Admin Error4181 Admin Warning4182 Admin Warning4183 Admin Critical Error4184 Admin Warning4185 Admin Error4186 Admin Error4187 Admin Error4188 Admin Error4189 Admin Error4190 Admin Error4191 Admin Warning4192 Admin Warning4193 Admin Error4194 Admin Error4195 Admin Warning4196 Admin Error4197 EV Critical Warning4198 EV Critical Warning4199 EV Critical Warning4200 EV Error4201 EV Error4202 EV Error4203 EV Error4204 EV Error4205 EV Warning4206 EV Error4207 EV Critical Error4208 EV Warning4209 EV Error4210 EV Error4211 EV Error4212 EV Critical Warning4213 EV Information4214 EV Critical Warning4215 EV Warning4216 EV Warning4217 EV Critical Warning

4218 EV Critical Warning4219 EV Critical Error4220 EV Error4221 EV Critical Error4222 EV Critical Error4223 EV Critical Warning4224 EV Error4225 EV Error4226 EV Critical Error4227 EV Warning4228 EV Error4229 EV Information4230 EV Information4231 EV Information4232 EV Information4233 EV Error4234 EV Error4235 EV Error4236 EV Error4237 EV Error4238 EV Error4239 EV Error4240 EV Warning5120 Shopping Information5121 Shopping Error5122 Shopping Error5123 Shopping Error5124 Shopping Information5125 Shopping Error5126 Shopping Error5127 Shopping Information5128 Shopping Error5129 Shopping Information5130 Shopping Error5131 Shopping Error5132 Shopping Error5133 Shopping Error5134 Shopping Error5135 Shopping Error5136 Shopping Error5137 Shopping Error5138 Shopping Error5139 Shopping Error5140 Shopping Error5141 Shopping Information5142 Shopping Information5143 Shopping Error5144 Shopping Error

5145 Shopping Error5146 Shopping Error5147 Shopping Error5148 Shopping Information5149 Shopping Error5150 Shopping Error5151 Shopping Error5152 Shopping Error5153 Shopping Information5154 Shopping Error5155 Shopping Error5156 Shopping Error5157 Shopping Error5158 Shopping Error5159 Shopping Error5160 Shopping Information5161 Shopping Error5162 Shopping Information5163 Shopping Error5164 Shopping Error5165 Shopping Error5166 Shopping Error5167 Shopping Error5168 Shopping Error5169 Shopping Error5170 Shopping Information5171 Shopping Error5172 Shopping Error5173 Shopping Information5174 Shopping Error5175 Shopping Error5176 Shopping Information5177 Shopping Error5178 Shopping Error5179 Shopping Error5180 Shopping Information5181 Shopping Information5182 Shopping Error5183 Shopping Information5184 Shopping Error5185 Shopping Error5186 Shopping Critical Information5187 Shopping Critical Information5188 Shopping Error5189 Shopping Error5190 Shopping Error5191 Shopping Error5192 Shopping Error

5193 Shopping Error5194 Shopping Error5195 Shopping Error5196 Shopping Information5197 Shopping Information5198 Shopping Information5199 Shopping Error5200 Shopping Error5201 Shopping Error5202 Shopping Error5203 Shopping Error5204 Shopping Error5205 Shopping Error5206 Shopping Error5207 Shopping Error5208 Shopping Information5209 Shopping Information5210 Shopping Error5211 Shopping Error5212 Shopping Error5213 Shopping Information5214 Shopping Error5215 Shopping Information5216 Shopping Error5217 Shopping Error5218 Shopping Error5219 Shopping Error5220 Shopping Error5221 Shopping Error5222 Shopping Error5223 Shopping Error5224 Shopping Error5225 Shopping Error5226 Shopping Error5227 Shopping Error5228 Shopping Error5229 EV Error5230 EV Critical Error6144 Storage Error6145 Storage Error6146 Storage Error6147 Storage Error6148 Storage Error6149 Storage Error6150 Storage Error6151 Storage Error6152 Storage Information6153 Storage Information

6154 Storage Information6155 Storage Information6156 Storage Information6157 Storage Information6158 Storage Information6159 Storage Information6160 Storage Converter Information6161 Storage Error6162 Storage Error6163 Storage Error6164 Storage Error6165 Storage Error6166 Storage Error6167 Storage Error6168 Storage Error6169 Storage Error6170 Storage Error6171 Storage Error6172 Storage Error6173 Storage Error6174 Storage Error6175 Storage Error6176 Storage Error6177 Storage Error6178 Storage Error6179 Storage Error6180 Storage Error6181 Storage Error6182 Storage Error6183 Storage Error6184 Storage Error6185 Storage Error6186 Storage Error6187 Storage Error6188 Storage Error6189 Storage Error6190 Storage Error6191 Storage Error6192 Storage Error6193 Storage Error6194 Storage Error6195 Storage Error6196 Storage Error6197 Storage Error6198 Storage Error6199 Storage Error6200 Storage Error6201 Storage Error

6202 Storage Error6203 Storage Error6204 Storage Error6205 Storage Error6206 Storage Error6207 Storage Error6208 Storage Error6209 Storage Warning6210 Storage Warning6211 Storage Error6212 Storage Warning6213 Storage Information6214 Storage Information6215 Storage Information6216 Storage Information6217 Storage Information6218 Storage Information6219 Storage Information6220 Storage Information6221 Storage Critical Information6222 Storage Critical Information6223 Storage Error6224 Storage Error6225 Storage Error6226 Storage Error6227 Storage Error6228 Storage Error6229 Storage Error6230 Storage Error6231 Storage Error6232 Storage Error6233 Storage Error6234 Storage Error6235 Storage Error6236 Storage Error6237 Storage Error6238 Storage Error6239 Storage Error6240 Storage Error6241 Storage Error6242 Storage Error6243 Storage Error6244 Storage Error6245 Storage Error6246 Storage Error6247 Storage Error6248 Storage Error6249 Storage Error

6250 Storage Error6251 Storage Error6252 Storage Error6253 Storage Error6254 Storage Error6255 Storage Error6256 Storage Error6257 Storage Error6258 Storage Warning6259 Storage Error6260 Storage Information6261 Storage Information6262 Storage Error6263 Storage Error6264 Storage Error6265 Storage Error6266 Storage Error6267 Storage Error6268 Storage Error6269 Storage Error6270 Storage Error6271 Storage Error6272 Storage Error6273 Storage Error6274 Storage Error6275 Storage Error6276 Storage Error6277 Storage Error6278 Storage Error6279 Storage Error6280 Storage Error6281 Storage Error6282 Storage Error6283 Storage Error6284 Storage Error6285 Storage Warning6286 Storage Error6287 Storage Warning6288 Storage Error6289 Storage Error6290 Storage Error6291 Storage Error6292 Storage Error6293 Storage Error6294 Storage Error6295 Storage Error6296 Storage Error6297 Storage Error

6298 Storage Error6299 Storage Error6300 Storage Error6301 Storage Error6302 Storage Error6303 Storage Error6304 Storage Error6305 Storage Error6306 Storage Error6307 Storage Error6308 Storage Warning6309 Storage Error6310 Storage Warning6311 Storage Error6312 Storage Error6313 Storage Warning6314 Storage Warning6315 Storage Warning6316 Storage Warning6317 Storage Warning6318 Storage Warning6319 Storage Warning6320 Storage Warning6321 Storage Warning6322 Storage Warning6323 Storage Warning6324 Storage Error6325 Storage Error6326 Storage Error6327 Storage Error6328 Storage Error6329 Storage Error6330 Storage Error6331 Storage Error6332 Storage Error6333 Storage Error6334 Storage Error6335 Storage Error6336 Storage Error6337 Storage Error6338 Storage Error6339 Storage Error6340 Storage Error6341 Storage Error6342 Storage Error6343 Storage Error6344 Storage Error6345 Storage Error

6346 Storage Error6347 Storage Warning6348 Storage Error6349 Storage Error6350 Storage Error6351 Storage Error6352 Storage Error6353 Storage Error6354 Storage Error6355 Storage Error6356 Storage Error6357 Storage Error6358 Storage Error6359 Storage Error6360 Storage Error6361 Storage Error6362 Storage Error6363 Storage Error6364 Storage Error6365 Storage Error6366 Storage Error6367 Storage Error6368 Storage Error6369 Storage Error6370 Storage Error6371 Storage Error6372 Storage Error6373 Storage Error6374 Storage Error6375 Storage Error6376 Storage Error6377 Storage Error6378 Storage Error6379 Storage Error6380 Storage Error6381 Storage Error6382 Storage Error6383 Storage Error6384 Storage Error6385 Storage Error6386 Storage Error6387 Storage Error6388 Storage Error6389 Storage Error6390 Storage Error6391 Storage Warning6392 Storage Error6393 Storage Error

6394 Storage Error6395 Storage Error6396 Storage Error6397 Storage Error6398 Storage Error6399 Storage Error6400 Storage Error6401 Storage Error6402 Storage Error6403 Storage Error6404 Storage Error6405 Storage Error6406 Storage Warning6407 Storage Warning6408 Storage Warning6409 Storage Warning6410 Storage Warning6411 Storage Warning6412 Storage Warning6413 Storage Warning6414 Storage Warning6415 Storage Warning6416 Storage Warning6417 Storage Warning6418 Storage Warning6419 Storage Warning6420 Storage Information6421 Storage Information6422 Storage Information6423 Storage Information6424 Storage Information6425 Storage Information6426 Storage Error6427 Storage Error6428 Storage Information6429 Storage Information6430 Storage Error6431 Storage Error6432 Storage Error6433 Storage Error6434 Storage Error6435 Storage Error6436 Storage Error6437 Storage Error6438 Storage Error6439 Storage Warning6440 Storage Error6441 Storage Error

6442 Storage Error6443 Storage Error6444 Storage Error6445 Storage Error6446 Storage Error6447 Storage Error6448 Storage Warning6449 Storage Error6450 Storage Warning6451 Storage Warning6452 Storage Information6453 Storage Error6454 Storage Error6455 Storage Error6456 Storage Error6457 Storage Error6458 Storage Error6459 Storage Error6460 Storage Warning6461 Storage Warning6462 Storage Error6463 Storage Error6464 Storage Error6465 Storage Warning6466 Storage Warning6467 Storage Warning6468 Storage Warning6469 Storage Error6470 Storage Error6471 Storage Error6472 Storage Error6473 Storage Error6474 Storage Information6475 Storage Information6476 Storage Information6477 Storage Information6478 Storage Information6479 Storage Error6480 Storage Error6481 Storage Error6482 Storage Error6483 Storage Error6484 Storage Error6485 Storage Warning6486 Storage Error6487 Storage Warning6488 Storage Warning6489 Storage Error

6490 Storage Error6491 Storage Warning6492 Storage Warning6493 Storage Warning6494 Storage Error6495 Storage Error6496 Storage Converter Error6497 Storage Converter Error6498 Storage Converter Warning6499 Storage Error6500 Storage Error6501 Storage Warning6502 Storage Error6503 Storage Warning6504 Storage Warning6505 Storage Warning6506 Storage Error6507 Storage Error6508 Storage Error6509 Storage Converter Error6510 Storage Warning6511 Storage Error6512 Storage Information6513 Storage Information6514 Storage Information6515 Storage Error6516 Storage Error6517 Storage Critical Error6518 Storage Error6519 Storage Information6520 Storage Information6521 Storage Information6522 Storage Error6523 Storage Error6524 Storage Error6525 Storage Error6526 Storage Error6527 Storage Error6528 Storage Error6529 Storage Warning6530 Storage Error6531 Storage Error6532 Storage Error6533 Storage Converter Error6534 Storage Error6535 Storage Error6536 Storage Error6537 Storage Error

6538 Storage Error6539 Storage Error6540 Storage Converter Warning6541 Storage Converter Warning6542 Storage Converter Information6543 Storage Error6544 Storage Error6545 Storage Information6546 Storage Error6547 Storage Error6548 Storage Error6549 Storage Warning6550 Storage Converter Information6551 Storage Converter Information6552 Storage Error6553 Storage Error6554 Storage Error6555 Storage Error6556 Storage Error6557 Storage Error6558 Storage Error6559 Storage Error6560 Storage Error6561 Storage Error6562 Storage Error6563 Storage Warning6564 Storage Error6565 Storage Information6566 Storage Error6567 Storage Error6568 Storage Error6569 Storage Error6570 Storage Information6571 Storage Information6572 Storage Error6573 Storage Error6574 Storage Error6575 Storage Error6576 Storage Error6577 Storage Error6578 Storage Error6579 Storage Error6580 Storage Error6581 Storage Error6582 Storage Error6583 Storage Information6584 Storage Warning6585 Storage Warning

6586 Storage Warning6587 Storage Error6588 Storage Error6589 Storage Error6590 Storage Information6591 Storage Information6592 Storage Error6593 Storage Error6594 Storage Information6595 Storage Information6596 Storage Error6597 Storage Warning6598 Storage Error6599 Storage Error6600 Storage Error6601 Storage Error6602 Storage Error6603 Storage Warning6604 Storage Information6605 Storage Error6606 Storage Error6607 Storage Error6608 Storage Information6609 Storage Error6610 Storage Error6611 Storage Information6612 Storage Information6613 Storage Information6614 Storage Error6615 Storage Error6616 Storage Error6617 Storage Error6618 Storage Error6619 Storage Error6620 Storage Error6621 Storage Error6622 Storage Converter Error6623 Storage Converter Error6624 Storage Converter Error6625 Storage Converter Error6626 Storage Converter Error6627 Storage Converter Error6628 Storage Converter Error6629 Storage Converter Warning6630 Storage Converter Information6631 Storage Information6632 Storage Information6633 Storage Information

6634 Storage Information6635 Storage Warning6636 Storage Warning6637 Storage Warning6638 Storage Error6639 Storage Error6640 Storage Error6641 Storage Error6642 Storage Error6643 Storage Error6644 Storage Error6645 Storage Error6646 Storage Error6647 Storage Information6648 Storage Error6649 Storage Error6650 Storage Error6651 Storage Error6652 Storage Information6653 Storage Error6654 Storage Warning6655 Storage Critical Error6656 Storage Error6657 Storage Error6658 Storage Error6659 Storage Warning6660 Storage Warning6661 Storage Information6662 Storage Error6663 Storage Error6664 Storage Converter Error6665 Storage Error6666 Storage Error6667 Storage Warning6668 Storage Warning6669 Storage Warning6670 Storage Error6671 Storage Error6672 Storage Converter Error6673 Storage Warning6674 Storage Warning6675 Storage Warning6676 Storage Warning6677 Storage Warning6678 Storage Warning6679 Storage Warning6680 Storage Warning6681 Storage Critical Error

6682 Storage Warning6683 Storage Error6684 Storage Error6685 Storage Error6686 Storage Error6687 Storage Error6688 Storage Error6689 Storage Error6690 Storage Error6691 Storage Error6692 Storage Error6693 Storage Error6694 Storage Error6695 Storage Error6696 Storage Error6697 Storage Error6698 Storage Warning6699 Storage Warning6700 Storage Error6701 Storage Error6702 Storage Error6703 Storage Error6704 Storage Information6705 Storage Warning6706 Storage Warning6707 Storage Error6708 Storage Error6709 Storage Warning6710 Storage Information6711 Storage Error6712 Storage Error6713 Storage Error6714 Storage Error6715 Storage Error6716 Storage Error6717 Storage Error6718 Storage Error6719 Storage Warning6720 Storage Warning6721 Storage Error6722 Storage Information6723 Storage Information6724 Storage Warning6725 Storage Warning6726 Storage Warning6727 Storage Error6728 Storage Information6729 Storage Error

6730 Storage Error6731 Storage Error6732 Storage Error6733 Storage Error6734 Storage Error6735 Storage Error6736 Storage Error6737 Storage Information6738 Storage Error6739 Storage Information6740 Storage Information6741 Storage Information6742 Storage Information6743 Storage Error6744 Storage Error6745 Storage Warning6746 Storage Warning6747 Storage Error6748 Storage Error6749 Storage Error6750 Storage Error6751 Storage Error6752 Storage Error6753 Storage Error6754 Storage Error6755 Storage Error6756 Storage Error6757 Storage Error6758 Storage Error6759 Storage Error6760 Storage Error6761 Storage Error6762 Storage Error6763 Storage Error6764 Storage Warning6765 Storage Warning6766 Storage Error6767 Storage Warning6768 Storage Information6769 Storage Information6770 Storage Information6771 Storage Information6772 Storage Warning6773 Storage Warning6774 Storage Error6775 Storage Error6776 Storage Error6777 Storage Error

6778 Storage Error6779 Storage Error6780 Storage Error6781 Storage Error6782 Storage Error6783 Storage Error6784 Storage Error6785 Storage Error6786 Storage Error6787 Storage Error6788 Storage Warning6789 Storage Warning6790 Storage Error6791 Storage Error6792 Storage Error6793 Storage Error6794 Storage Error6795 Storage Warning6796 Storage Error6797 Storage Error6798 Storage Error6799 Storage Error6800 Storage Error6801 Storage Error6802 Storage Error6803 Storage Error6804 Storage Error6805 Storage Warning6806 Storage Warning6807 Storage Error6808 Storage Error6809 Storage Error6810 Storage Error6811 Storage Error6812 Storage Error6813 Storage Warning6814 Storage Error6815 Storage Error6816 Storage Error6817 Storage Error6818 Storage Error6819 Storage Error6820 Storage Error6821 Storage Error6822 Storage Error6823 Storage Error6824 Storage Warning6825 Storage Error

6826 Storage Error6827 Storage Error6828 Storage Error6829 Storage Error6830 Storage Error6831 Storage Error6832 Storage Error6833 Storage Warning6834 Storage Error6835 Storage Error6836 Storage Error6837 Storage Error6838 Storage Error6839 Storage Error6840 Storage Warning6841 Storage Warning6842 Storage Error6843 Storage Error6844 Storage Error6845 Storage Error6846 Storage Error6847 Storage Error6848 Storage Error6849 Storage Error6850 Storage Error6851 Storage Error6852 Storage Error6853 Storage Error6854 Storage Information6855 Storage Information6856 Storage Warning6857 Storage Information6858 Storage Information6859 Storage Information6860 Storage Information6861 Storage Information6862 Storage Information6863 Storage Error6864 Storage Warning6865 Storage Error6866 Storage Error6867 Storage Error6868 Storage Warning6869 Storage Warning6870 Storage Warning6871 Storage Error6872 Storage Error6873 Storage Warning

6874 Storage Error6875 Storage Error6876 Storage Information6877 Storage Error6878 Storage Warning6879 Storage Warning6880 Storage Warning6881 Storage Error6882 Storage Error6883 Storage Error6884 Storage Error6885 Storage Error6886 Storage Warning6887 Storage Warning6888 Storage Error6889 Storage Error6890 Storage Warning6891 Storage Warning6892 Storage Error6893 Storage Warning6894 Storage Warning6895 Storage Converter Warning6896 Storage Converter Error6897 Storage Error6898 Storage Error6899 Storage Error6900 Storage Error6901 Storage Error6902 Storage Error6903 Storage Error6904 Storage Error6905 Storage Error6906 Storage Error6907 Storage Converter Error6908 Storage Error6909 Storage Error6910 Storage Error6911 Storage Warning6912 Storage Warning6913 Storage Warning6914 Storage Warning6915 Storage Warning6916 Storage Error6917 Storage Information6918 Storage Error6919 Storage Information6920 Storage Information6921 Storage Information

6922 Storage Warning6923 Storage Information6924 Storage Information6925 Storage Error6926 Storage Error6927 Storage Error6928 Storage Warning6929 Storage Error6930 Storage Error6931 Storage Error6932 Storage Warning6933 Storage Warning6934 Storage Warning6935 Storage Error6936 Storage Warning6937 Storage Error6938 Storage Error6939 Storage Error6940 Storage Warning6941 Storage Warning6942 Storage Warning6943 Storage Warning6944 Storage Error6945 Storage Warning6946 Messa Error6947 Messa Warning6948 Messa Error6949 Messa Warning6950 Messa Error6951 Messa Error6952 Messa Error6953 Messa Error6954 Messa Error6955 Messa Error6956 EV Warning6957 EV Warning6958 EV Information6959 EV Information6960 EV Warning6961 EV Error6962 EV Error6963 EV Warning6964 EV Warning6965 EV Warning6966 EV Error6967 EV Error6968 EV Error6969 EV Error

6970 EV Warning6971 EV Warning6972 EV Warning6973 EV Information6974 EV Warning6975 EV Warning6976 EV Information6977 EV Critical Error6978 EV Warning6979 EV Error6980 EV Error6981 EV Error6982 EV Error6983 EV Error6984 EV Error6985 EV Error6986 EV Error6987 EV Error6988 EV Error6989 EV Error6990 EV Error6991 EV Warning6992 EV Error6993 EV Error6994 EV Warning6995 EV Warning6996 EV Error6997 EV Warning6998 EV Warning6999 EV Error7000 EV Error7001 EV Error7002 EV Error7003 EV Error7004 EV Error7005 EV Error7006 EV Error7007 EV Error7008 EV Error7009 EV Warning7010 EV Warning7011 EV Warning7012 EV Warning7013 EV Information7014 EV Critical Error7015 EV Information7016 EV Information7017 EV Warning

7018 EV Error7019 EV Warning7020 EV Error7021 EV Error7022 EV Error7023 EV Error7024 EV Error7025 EV Error7026 EV Error7027 EV Warning7028 EV Information7029 EV Information7030 EV Error7031 EV Error7032 EV Error7033 EV Error7034 EV Error7035 EV Information7036 EV Information7037 EV Error7038 EV Warning7039 EV Warning7040 EV Error7041 EV Error7042 EV Error7043 EV Error7044 EV Error7045 EV Error7046 EV Critical Error7047 EV Warning7048 EV Warning7049 EV Information7050 EV Information7051 EV Error7052 EV Error7053 EV Error7054 EV Error7055 EV Warning7056 EV Warning7057 EV Warning7058 EV Critical Information7059 EV Critical Information7060 EV Critical Information7061 EV Error7062 EV Error7063 EV Information7064 EV Error7065 EV Error

7066 EV Information7067 EV Warning7068 EV Information7069 EV Warning7070 EV Warning7071 EV Warning7072 EV Warning7073 EV Error7074 EV Error7075 EV Warning7076 EV Error7077 EV Critical Warning7078 EV Information7079 EV Critical Information7080 EV Critical Information7081 EV Critical Information7082 EV Critical Error7083 EV Error7084 EV Information7085 EV Information7086 EV Information7087 EV Information7088 EV Warning7089 EV Information7090 EV Error7091 EV Error7092 EV Error7093 EV Warning7094 EV Error7095 EV Error7096 EV Error7097 EV Warning7098 EV Critical Error7099 EV Error7100 EV Error7101 EV Warning7102 EV Information7103 EV Information7104 EV Error7105 EV Warning7106 EV Warning7107 EV Information7108 EV Error7109 EV Warning7110 EV Warning7111 EV Error7112 EV Warning7113 EV Warning

7114 EV Error7115 EV Information7116 EV Error7117 EV Error7118 EV Warning7119 EV Error7120 EV Error7121 EV Error7122 EV Error7123 EV Error7124 EV Error7125 EV Error7126 EV Warning7127 EV Error7128 EV Error7129 EV Error7130 EV Information7131 EV Error7132 EV Error7133 EV Information7134 EV Information7135 EV Error7136 EV Error7137 EV Warning7138 EV Error7139 EV Information7140 EV Warning7141 EV Warning7142 EV Error7143 EV Error7144 EV Error7145 EV Error7146 EV Error7147 EV Error7148 EV Error7149 EV Error7150 EV Error7151 EV Error7152 EV Error7153 EV Error7154 EV Error7155 EV Warning7156 EV Error7157 EV Error7158 EV Error7159 EV Error7160 EV Error7161 EV Information

7162 EV Warning7163 EV Error7164 EV Error7165 EV Warning7166 EV Error7167 EV Warning7168 Indexing Error7169 Indexing Error7170 Indexing Information7171 Indexing Information7172 Indexing Information7173 Indexing Error7174 Indexing Error7175 Indexing Warning7176 Indexing Error7177 Indexing Error7178 Indexing Warning7179 Indexing Error7180 Indexing Error7181 Indexing Error7182 Indexing Error7183 Indexing Error7184 Indexing Critical Error7185 Indexing Warning7186 Indexing Error7187 Indexing Error7188 Indexing Error7189 Indexing Error7190 Indexing Error7191 Indexing Error7192 Indexing Warning7193 Indexing Warning7194 Indexing Warning7195 Indexing Error7196 Indexing Error7197 Indexing Error7198 Indexing Error7199 Indexing Error7200 Indexing Error7201 Indexing Error7202 Indexing Warning7203 Indexing Warning7204 Indexing Error7205 Indexing Error7206 Indexing Critical Error7207 Indexing Critical Error7208 Indexing Error7209 Indexing Information

7210 Indexing Warning7211 Indexing Error7212 Indexing Error7213 Indexing Error7214 Indexing Error7215 Indexing Error7216 Indexing Warning7217 Indexing Error7218 Indexing Warning7219 Indexing Warning7220 Indexing Information7221 Indexing Error7222 Indexing Error7223 Indexing Error7224 Indexing Error7225 Indexing Error7226 Indexing Error7227 Indexing Error7228 Indexing Error7229 Indexing Error7230 Indexing Error7231 Indexing Error7232 Indexing Error7233 Indexing Error7234 Indexing Warning7235 Indexing Error7236 Indexing Warning7237 Indexing Converter Error7238 Indexing Error7239 Indexing Warning7240 Indexing Error7241 Indexing Error7242 Indexing Warning7243 Indexing Critical Error7244 Indexing Warning7245 Indexing Error7246 Indexing Error7247 Indexing Error7248 Indexing Error7249 Indexing Error7250 Indexing Warning7251 Indexing Error7252 Indexing Critical Error7253 Indexing Error7254 Indexing Error7255 Indexing Information7256 Indexing Information7257 Indexing Information

7258 Indexing Error7259 Indexing Warning7260 Indexing Error7261 Indexing Error7262 Indexing Error7263 Indexing Warning7264 Indexing Error7265 Indexing Error7266 Indexing Error7267 Indexing Error7268 Indexing Error7269 Indexing Error7270 Indexing Warning7271 Indexing Error7272 Indexing Warning7273 Indexing Warning7274 Indexing Warning7275 Indexing Warning7276 Indexing Warning7277 Indexing Warning7278 EV Warning7279 EV Error7280 EV Warning7281 EV Warning7282 EV Warning7283 EV Error7284 EV Error7285 EV Information7286 EV Error7287 EV Information7288 EV Warning7289 EV Warning7290 EV Warning7291 EV Warning7292 EV Critical Error7293 EV Error7294 EV Information7295 EV Information7296 EV Warning7297 EV Warning7298 EV Error7299 EV Error7300 EV Warning7301 EV Converter Information7302 EV Warning7303 EV Warning7304 EV Error7305 EV Information

7306 EV Warning7307 EV Warning7308 EV Warning7309 EV Warning7310 EV Information7311 EV Warning7312 EV Error7313 EV Error7314 EV Information7315 EV Warning7316 EV Information7317 EV Information7318 EV Information7319 EV Information7320 EV Information7321 EV Information7322 EV Warning7323 EV Warning7324 EV Error8192 Directory Critical Information8193 Directory Critical Information8194 Directory Information8195 Directory Information8196 Directory Information8197 Directory Information8198 Directory Information8199 Directory Information8200 Directory Information8201 Directory Information8202 Directory Information8203 Directory Information8204 Directory Information8205 Directory Information8206 Directory Information8207 Directory Information8208 Directory Information8209 Directory Information8210 Directory Information8211 Directory Information8212 Directory Information8213 Directory Information8214 Directory Information8215 Directory Information8216 Directory Information8217 Directory Information8218 Directory Information8219 Directory Information8220 Directory Information

8221 Directory Information8222 Directory Information8223 Directory Information8224 Directory Information8225 Directory Information8226 Directory Information8227 Directory Information8228 Directory Information8229 Directory Information8230 Directory Information8231 Directory Error8232 Directory Information8233 Directory Information8234 Directory Information8235 Directory Information8236 Directory Information8237 Directory Information8238 Directory Information8239 Directory Information8240 Directory Information8241 Directory Information8242 Directory Information8243 Directory Information8244 Directory Information8245 Directory Information8246 Directory Information8247 Directory Information8248 Directory Information8249 Directory Information8250 Directory Information8251 Directory Information8252 Directory Information8253 Directory Information8254 Directory Information8255 Directory Information8256 Directory Information8257 Directory Information8258 Directory Information8259 Directory Information8260 Directory Information8261 Directory Information8262 Directory Information8263 Directory Information8264 Directory Information8265 Directory Information8266 Directory Information8267 Directory Information8268 Directory Information

8269 Directory Information8270 Directory Information8271 Directory Information8272 Directory Warning8273 Directory Warning8274 Directory Error8275 Directory Error8276 Directory Error8277 Directory Error8278 Directory Error8279 Directory Error8280 Directory Error8281 Directory Error8282 Directory Error8283 Directory Error8284 Directory Error8285 Directory Error8286 Directory Error8287 Directory Error8288 Directory Error8289 Directory Error8290 Directory Error8291 Directory Error8292 Directory Error8293 Directory Error8294 Directory Error8295 Directory Error8296 Directory Error8297 Directory Error8298 Directory Error8299 Directory Error8300 Directory Error8301 Directory Error8302 Directory Error8303 Directory Error8304 Directory Error8305 Directory Error8306 Directory Error8307 Directory Error8308 Directory Error8309 Directory Error8310 Directory Error8311 Directory Error8312 Directory Error8313 Directory Error8314 Directory Error8315 Directory Error8316 Directory Error

8317 Directory Error8318 Directory Error8319 Directory Error8320 Directory Error8321 Directory Error8322 Directory Error8323 Directory Error8324 Directory Error8325 Directory Error8326 Directory Error8327 Directory Error8328 Directory Error8329 Directory Error8330 Directory Error8331 Directory Error8332 Directory Error8333 Directory Error8334 Directory Error8335 Directory Error8336 Directory Error8337 Directory Error8338 Directory Error8339 Directory Error8340 Directory Error8341 Directory Error8342 Directory Error8343 Directory Error8344 Directory Error8345 Directory Error8346 Directory Error8347 Directory Error8348 Directory Error8349 Directory Error8350 Directory Error8351 Directory Error8352 Directory Error8353 Directory Error8354 Directory Error8355 Directory Error8356 Directory Error8357 Directory Error8358 Directory Error8359 Directory Error8360 Directory Error8361 Directory Error8362 Directory Error8363 Directory Error8364 Directory Error

8365 Directory Error8366 Directory Error8367 Directory Error8368 Directory Error8369 Directory Error8370 Directory Error8371 Directory Error8372 Directory Error8373 Directory Error8374 Directory Error8375 Directory Error8376 Directory Error8377 Directory Error8378 Directory Error8379 Directory Error8380 Directory Error8381 Directory Error8382 Directory Error8383 Directory Error8384 Directory Error8385 Directory Error8386 Directory Error8387 Directory Error8388 Directory Error8389 Directory Error8390 Directory Error8391 Directory Error8392 Directory Error8393 Directory Error8394 Directory Error8395 Directory Error8396 Directory Error8397 Directory Error8398 Directory Error8399 Directory Error8400 Directory Error8401 Directory Error8402 Directory Error8403 Directory Error8404 Directory Error8405 Directory Error8406 Directory Error8407 Directory Error8408 Directory Error8409 Directory Error8410 Directory Error8411 Directory Error8412 Directory Error

8413 Directory Error8414 Directory Error8415 Directory Error8416 Directory Error8417 Directory Error8418 Directory Error8419 Directory Error8420 Directory Error8421 Directory Error8422 Directory Error8423 Directory Error8424 Directory Error8425 Directory Error8426 Directory Error8427 Directory Error8428 Directory Error8429 Directory Error8430 Directory Error8431 Directory Error8432 Directory Error8433 Directory Error8434 Directory Error8435 Directory Error8436 Directory Error8437 Directory Error8438 Directory Error8439 Directory Error8440 Directory Error8441 Directory Error8442 Directory Error8443 Directory Error8444 Directory Error8445 Directory Error8446 Directory Error8447 Directory Error8448 Directory Error8449 Directory Error8450 Directory Information8451 Directory Information8452 Directory Error8453 Directory Error8454 Directory Error8455 Directory Warning8456 Directory Error8457 Directory Error8458 Directory Error8459 Directory Error8460 Directory Error

8461 Directory Error8462 Directory Error8463 Directory Error8464 Directory Error8465 Directory Error8466 Directory Error8467 Directory Error8468 Directory Error8469 Directory Error8470 Directory Error8471 Directory Error8472 Directory Error8473 Directory Error8474 Directory Error8475 Directory Error8476 Directory Error8477 Directory Error8478 Directory Error8479 Directory Error8480 Directory Error8481 Directory Error8482 Directory Error8483 Directory Error8484 Directory Error8485 Directory Error8486 Directory Error8487 Directory Error8488 Directory Error8489 Directory Error8490 Directory Error8491 Directory Error8492 Directory Error8493 Directory Error8494 Directory Error8495 Directory Error8496 Directory Error8497 Directory Error8498 Directory Error8499 Directory Error8500 Directory Error8501 Directory Error8502 Directory Error8503 Directory Information8504 Directory Warning8505 Directory Error8506 Directory Error8507 Directory Error8508 Directory Error

8509 Directory Error8510 Directory Error8511 Directory Error8512 Directory Error8513 Directory Error8514 Directory Error8515 Directory Error8516 Directory Error8517 Directory Error8518 Directory Error8519 Directory Error8520 Directory Error8521 Directory Error8522 Directory Error8523 Directory Error8524 Directory Error8525 Directory Error8526 Directory Error8527 Directory Error8528 Directory Error8529 Directory Error8530 Directory Error8531 Directory Error8532 Directory Error8533 Directory Error8534 Directory Error8535 Directory Error8536 Directory Error8537 Directory Error8538 Directory Error8539 Directory Information8540 Directory Information8541 Directory Error8542 Directory Error8543 Directory Warning8544 Directory Warning8545 Directory Error8546 Directory Error8547 Directory Error8548 Directory Error8549 Directory Error8550 Directory Error8551 Directory Information8552 Directory Error8553 Directory Error8554 Directory Error8555 Directory Error8556 Directory Error

8557 Directory Error8558 Directory Error8559 Directory Error8560 Directory Error8561 Directory Error8562 Directory Error8563 Directory Error8564 Directory Error8565 Directory Error8566 Directory Error8567 Directory Error8568 Directory Error8569 EV Error8570 EV Warning8571 EV Warning8572 EV Error8573 EV Error8574 EV Error8575 EV Information8576 EV Information8577 EV Error8578 EV Error8579 EV Warning8580 EV Error8581 EV Error8582 EV Error8583 EV Error8584 EV Error8585 EV Error8586 EV Error8587 EV Warning8588 EV Error8589 EV Error8590 EV Error8591 EV Error8592 EV Error8593 EV Error8594 EV Error8595 EV Error8596 EV Error8597 EV Error8598 EV Error8599 EV Warning8600 EV Error8601 EV Error8602 EV Error8603 EV Error8604 EV Error

8605 EV Error13312 Database Information13313 Database Information13314 Database Information13315 Database Information13316 Database Information13317 Database Information13318 Database Information13319 Database Information13320 Database Information13321 Database Information13322 Database Information13323 Database Information13324 Database Information13325 Database Information13326 Database Error13327 Database Error13328 Database Error13329 Database Error13330 Database Error13331 Database Error13332 Database Error13333 Database Error13334 Database Error13335 Database Error13336 Database Error13337 Database Error13338 Database Error13339 Database Error13340 Database Error13341 Database Error13342 Database Warning13343 Database Error13344 Database Error13345 Database Error13346 Database Warning13347 Database Warning13348 Database Error13349 Database Warning13350 Database Warning13351 Database Error13352 Database Information13353 Database Warning13354 Database Error13355 Database Error13356 Database Error13357 Database Error13358 Database Error

13359 Database Error13360 Database Error13361 Database Error13362 Database Error13363 Database Error13364 Database Error13365 Database Error13366 Database Error13367 Database Warning13368 Database Error13369 Database Error13370 Database Error13371 Database Error13372 Database Warning13373 Database Warning13374 Database Warning13375 Database Error13376 Database Warning13377 Database Warning13378 Database Information13379 Database Information13380 Database Information13381 Database Information13382 Database Information13383 Database Information13384 Database Information13385 Database Information13386 Database Warning13387 Database Information13388 Database Information13389 Database Error13390 Database Warning13391 Database Warning13392 Database Error13393 Database Warning13394 Database Information13395 Database Warning13396 Database Error13397 EV Critical Warning16384 SPS Information16385 SPS Critical Information16386 SPS Critical Information16387 SPS Error16388 SPS Error16389 SPS Error16390 SPS Error16391 SPS Information16392 SPS Error

16393 SPS Information16394 SPS Error16395 SPS Error16396 SPS Error16397 SPS Critical Error16398 SPS Error16399 SPS Error16400 SPS Error16401 SPS Error16402 SPS Error16403 SPS Error16404 SPS Error16405 SPS Error16406 SPS Error16407 SPS Error16408 SPS Error16409 SPS Error16410 SPS Error16411 SPS Error16412 SPS Warning16413 SPS Error16414 SPS Warning16415 SPS Error16416 SPS Error16417 SPS Error16418 SPS Error16419 SPS Error16420 SPS Error16421 SPS Error16422 SPS Error16423 SPS Error16424 SPS Warning16425 SPS Error16426 SPS Critical Information16427 SPS Critical Information16428 SPS Warning16429 SPS Warning16430 SPS Information16431 SPS Warning16432 EV Critical Error16433 EV Warning16434 EV Warning20480 Messaging Information20481 Messaging Critical Information20482 Messaging Critical Information20483 Messaging Error20484 Messaging Critical Error20485 Messaging Error

20486 Messaging Error20487 Messaging Error20488 Messaging Error20489 Messaging Error20490 Messaging Error20491 Messaging Error20492 Messaging Error20493 Messaging Error20494 Messaging Error20495 Messaging Error20496 Messaging Error20497 Messaging Critical Error20498 Messaging Error20499 Messaging Error20500 Messaging Error20501 Messaging Critical Error20502 Messaging Error20503 Messaging Critical Error20504 Messaging Critical Error20505 Messaging Error20506 Messaging Error20507 Messaging Error20508 Messaging Error20509 Messaging Error20510 Messaging Error20511 Messaging Error20512 Messaging Error20513 Messaging Error20514 Messaging Error20515 Messaging Error20516 Messaging Error20517 Messaging Error20518 Messaging Error20519 Messaging Error20520 Messaging Error20521 Messaging Error20522 Messaging Error20523 Messaging Error20524 Messaging Error20525 Messaging Error20526 Messaging Error20527 Messaging Error20528 Messaging Error20529 Messaging Error20530 Messaging Error20531 Messaging Error20532 Messaging Error20533 Messaging Error

20534 Messaging Error20535 Messaging Error20536 Messaging Error20537 Messaging Error20538 Messaging Error20539 EV Error20540 EV Critical Error20541 EV Warning20542 EV Error20543 EV Error20544 EV Error20545 EV Error20546 EV Error20547 EV Success20548 EV Warning20549 EV Warning20550 EV Error24576 EV Success24577 EV Success24578 EV Error24579 EV Error24580 EV Error24581 EV Error24582 EV Error24583 EV Error24584 EV Error24585 EV Error24586 EV Information24587 EV Error24588 EV Error24589 EV Error24590 EV Information24591 EV Error24592 EV Error24593 EV Error24594 EV Error24595 EV Warning24596 EV Error24597 EV Error24598 EV Error24599 EV Error24600 EV Error24601 EV Error24602 EV Error24603 EV Error24604 EV Error24605 EV Error24606 EV Error

24607 EV Error24608 EV Error24609 EV Error24610 EV Error24611 EV Error24612 EV Error24613 EV Error24614 EV Error24615 EV Error24616 EV Error24617 EV Error24618 EV Error24619 EV Error24620 EV Error24621 EV Error24622 EV Error24623 EV Error24624 EV Information24625 EV Error24626 EV Error24627 EV Error24628 EV Error24629 EV Error24630 EV Error24631 EV Error24632 EV Error24633 EV Error24634 EV Error24635 EV Information24636 EV Error24637 EV Warning24638 EV Information24639 EV Information24640 EV Information24641 EV Information24642 EV Error24643 EV Information24644 EV Information24645 EV Error24646 EV Information24647 EV Information24648 EV Error24649 EV Information24650 EV Information24651 EV Information24652 EV Information24653 EV Error24654 EV Error

24655 EV Error24656 EV Error24657 EV Error24658 EV Error24659 EV Information24660 EV Error24661 EV Error24662 EV Information24663 EV Error24664 EV Error24665 EV Error24666 EV Error24667 EV Error24668 EV Error24669 EV Error24670 EV Information24671 EV Error24672 EV Error24673 EV Error24674 EV Error24675 EV Information24676 EV Information24677 EV Error24678 EV Error24679 EV Error24680 EV Error24681 EV Error24682 EV Information24683 EV Error24684 EV Error24685 EV Information24686 EV Information24687 EV Information24688 EV Information24689 EV Information24690 EV Error24691 EV Error28672 EV Success28673 EV Success28674 EV Success28675 EV Success28676 EV Information28677 EV Warning28678 EV Error28679 EV Information28680 EV Error28681 EV Error28682 EV Error

28683 EV Error28684 EV Error28685 EV Error28686 EV Error28687 EV Error28688 EV Error28689 EV Error28690 EV Error28691 EV Error28692 EV Error28693 EV Success28694 EV Error28695 EV Error28928 EV Error28929 EV Error28930 EV Error28931 EV Error28932 EV Error28933 EV Warning28934 EV Warning28935 EV Warning28936 EV Error28937 EV Warning28938 EV Error28939 EV Error28940 EV Error28941 EV Warning40960 EV Information40961 EV Information40962 EV Information40963 EV Information40964 EV Warning40965 EV Information40966 EV Critical Error40967 EV Warning40968 EV Critical Error40969 EV Warning40970 EV Warning40971 EV Warning40972 EV Critical Error40973 EV Warning40974 EV Warning40975 EV Critical Warning40976 EV Critical Warning40977 EV Critical Warning40978 EV Critical Error40979 EV Critical Error40980 EV Critical Error

40981 EV Error40982 EV Critical Error40983 EV Information40984 EV Information40985 EV Information40986 EV Information40987 EV Information40988 EV Information40989 EV Information40990 EV Information40991 EV Information40992 EV Information40993 EV Information40994 EV Information40995 EV Information40996 EV Information40997 EV Critical Error40998 EV Warning40999 EV Warning41000 EV Information41001 EV Information41002 EV Information41003 EV Information41004 EV Information41005 EV Information41006 EV Information41007 EV Information41008 EV Critical Warning41009 EV Warning41010 EV Error41011 EV Critical Warning41012 EV Critical Warning41013 EV Critical Warning41014 EV Critical Warning41015 EV Critical Warning41016 EV Critical Warning41017 EV Error41018 EV Warning41019 EV Information41020 EV Critical Error41021 EV Critical Warning41022 EV Critical Warning41023 EV Critical Warning41024 EV Critical Error41025 EV Warning41026 EV Warning41027 EV Information41028 EV Error

41029 EV Error41030 EV Warning41031 EV Information41032 EV Information41033 EV Error41034 EV Error41035 EV Critical Error41036 EV Critical Error41037 EV Critical Error41038 EV Information41039 EV Information41040 EV Information41041 EV Information41042 EV Critical Error41043 EV Warning41044 EV Warning41045 EV Critical Error41046 EV Critical Error41047 EV Critical Error41048 EV Warning41049 EV Critical Error41050 EV Critical Error41051 EV Critical Error41052 EV Critical Error41053 EV Critical Error41054 EV Critical Error41055 EV Warning41056 EV Warning41057 EV Warning41058 EV Error41059 EV Critical Error41060 EV Critical Error41061 EV Critical Error41062 EV Critical Error41063 EV Error41064 EV Warning41065 EV Warning41066 EV Critical Error41067 EV Critical Error41068 EV Warning41069 EV Critical Warning41070 EV Error41071 EV Information41072 EV Information41073 EV Error41074 EV Warning41075 EV Warning41076 EV Warning

41077 EV Error41078 EV Error41079 EV Warning41080 EV Information41081 EV Error41082 EV Critical Error41083 EV Error41084 EV Information41085 EV Warning41086 EV Information41087 EV Information41088 EV Error41089 EV Warning41090 EV Error41091 EV Warning41092 EV Information41093 EV Information41094 EV Information41095 EV Information41096 EV Error41097 EV Error41098 EV Error41099 EV Warning41100 EV Error41101 EV Error41102 EV Information41103 EV Information41104 EV Information41105 EV Information41106 EV Error41107 EV Warning41108 EV Information41109 EV Information41110 EV Critical Error41111 EV Error41112 EV Error41113 EV Information41114 EV Information41115 EV Information41116 EV Information41117 EV Warning41118 EV Error41119 EV Error41120 EV Information41121 EV Information41122 EV Error41123 EV Error41124 EV Information

41125 EV Information41126 EV Warning41127 EV Warning41128 EV Error41129 EV Critical Error41130 EV Warning41131 EV Information41132 EV Error41133 EV Critical Error41134 EV Information41135 EV Error41136 EV Error41137 EV Error41138 EV Information41139 EV Information41140 EV Warning41141 EV Warning41142 EV Warning41143 EV Warning41144 EV Warning41145 EV Error41146 EV Error41147 EV Warning41148 EV Warning41149 EV Warning41150 EV Warning41151 EV Warning41152 EV Error41153 EV Warning41154 EV Warning41155 EV Warning41156 EV Error41157 EV Error41158 EV Warning41159 EV Warning41160 EV Warning41161 EV Warning41162 EV Error41163 EV Error41164 EV Error41165 EV Error41166 EV Information41167 EV Error41168 EV Warning41169 EV Warning41170 EV Warning41171 EV Error41172 EV Warning

41173 EV Error41174 EV Error41175 EV Warning41176 EV Warning41177 EV Error41178 EV Warning41179 EV Warning41180 EV Warning41181 EV Error41182 EV Information41183 EV Error41184 EV Error41185 EV Error41186 EV Error41187 EV Error41188 EV Warning41189 EV Error41190 EV Warning41191 EV Warning41192 EV Warning41193 EV Error41194 EV Information41195 EV Error41196 EV Information41197 EV Error41198 EV Warning41199 EV Error41200 EV Warning41201 EV Warning41202 EV Warning41203 EV Critical Warning41204 EV Critical Warning41205 EV Critical Warning41206 EV Critical Error41207 EV Critical Error41208 EV Error41209 EV Error41210 EV Error41211 EV Error41212 EV Error41213 EV Error41214 EV Information41215 EV Information41216 EV Information41217 EV Information41218 EV Information41219 EV Information41220 EV Warning

41221 EV Error41222 EV Error41223 EV Error41224 EV Error41225 EV Error41226 EV Error41227 EV Error41228 EV Error41229 EV Warning41230 EV Warning41231 EV Warning41232 EV Error41233 EV Error41234 EV Error41235 EV Error41236 EV Warning41237 EV Information41238 EV Information41239 EV Information41240 EV Error41241 EV Error41242 EV Information41243 EV Information41244 EV Error41245 EV Error41246 EV Warning41247 EV Error41248 EV Error41249 EV Warning41250 EV Error41251 EV Error41252 EV Warning41253 EV Error41254 EV Error41255 EV Success41256 EV Success41257 EV Success41258 EV Success41259 EV Success41260 EV Success41261 EV Success41262 EV Success41263 EV Success41264 EV Success41265 EV Success41266 EV Success41267 EV Success41268 EV Success

41269 EV Success41270 EV Success41271 EV Success41272 EV Success41273 EV Success41274 EV Success41275 EV Success41276 EV Success41277 EV Success41278 EV Success41279 EV Success41280 EV Success41281 EV Success41282 EV Success41283 EV Success41284 EV Success41285 EV Success41286 EV Success41287 EV Success41288 EV Success41289 EV Success41290 EV Success41291 EV Success41292 EV Success41293 EV Success41294 EV Success41295 EV Success41296 EV Success41297 EV Success41298 EV Success41299 EV Success41300 EV Success41301 EV Success41302 EV Success41303 EV Success41304 EV Success41305 EV Success41306 EV Success41307 EV Success41308 EV Success41309 EV Success41310 EV Success41311 EV Success41312 EV Success41313 EV Success41314 EV Success41315 EV Success41316 EV Success

41317 EV Success41318 EV Success41319 EV Success41320 EV Success41321 EV Success41322 EV Success41323 EV Success41324 EV Success41325 EV Success41326 EV Success41327 EV Success41328 EV Success41329 EV Success41330 EV Success41331 EV Success41332 EV Success41333 EV Success41334 EV Success41335 EV Success41336 EV Success41337 EV Success41338 EV Success41339 EV Success41340 EV Success41341 EV Success41342 EV Success41343 EV Success41344 EV Success41345 EV Success41346 EV Success41347 EV Success41348 EV Success41349 EV Success41350 EV Success41351 EV Success41352 EV Success41353 EV Success41354 EV Success41355 EV Success41356 EV Success41357 EV Success41358 EV Success41359 EV Success41360 EV Success41361 EV Success41362 EV Success41363 EV Success41364 EV Success

41365 EV Success41366 EV Success41367 EV Success41368 EV Success41369 EV Success41370 EV Success41371 EV Success41372 EV Success41373 EV Success41374 EV Success41375 EV Success41376 EV Success41377 EV Success41378 EV Success41379 EV Success41380 EV Success41381 EV Success41382 EV Success41383 EV Success41384 EV Success41385 EV Success41386 EV Success41387 EV Success41388 EV Success41389 EV Success41390 EV Success41391 EV Success41392 EV Success41393 EV Success41394 EV Success41395 EV Success41396 EV Success41397 EV Success41398 EV Success41399 EV Success41400 EV Success41401 EV Success41402 EV Success41403 EV Success41404 EV Success41405 EV Success41406 EV Success41407 EV Success41408 EV Success41409 EV Success41410 EV Success41411 EV Success41412 EV Success

41413 EV Success41414 EV Success41415 EV Success41416 EV Success41417 EV Success41418 EV Success41419 EV Success41420 EV Success41421 EV Success41422 EV Success41423 EV Success41424 EV Success41425 EV Success41426 EV Success41427 EV Success41428 EV Success41429 EV Success41430 EV Success41431 EV Success41432 EV Success41433 EV Success41434 EV Success41435 EV Success41436 EV Success41437 EV Success41438 EV Success41439 EV Success41440 EV Success41441 EV Success41442 EV Success41443 EV Success41444 EV Success41445 EV Success41446 EV Success41447 EV Success41448 EV Success41449 EV Success41450 EV Success41451 EV Success41452 EV Success41453 EV Success41454 EV Success41455 EV Success41456 EV Success41457 EV Success41458 EV Success41459 EV Success45056 EV Information

45057 EV Critical Information45058 EV Critical Information45059 EV Error45060 EV Error45061 EV Error45062 EV Error45063 EV Error45064 EV Error45065 EV Error45066 EV Error45067 EV Information45068 EV Error45069 EV Information45070 EV Error45071 EV Error45072 EV Error45073 EV Critical Error45074 EV Error45075 EV Error45076 EV Error45077 EV Critical Error45078 EV Error45079 EV Critical Error45080 EV Critical Error45081 EV Critical Error45082 EV Warning45312 EV Warning45313 EV Error45314 EV Error45315 EV Error45316 EV Error45317 EV Error45318 EV Error45319 EV Error45320 EV Error45321 EV Error45322 EV Error45323 EV Error45324 EV Warning45325 EV Warning45326 EV Error45327 EV Warning45328 EV Warning45329 EV Information45330 EV Information45331 EV Error45332 EV Error45333 EV Error

45334 EV Error45335 EV Error45568 EV Error45569 EV Error49152 EV Error49153 EV Error49154 EV Error49155 EV Error49156 EV Error49157 EV Error49158 EV Error49159 EV Error49160 EV Error49161 EV Error49162 EV Error49163 EV Error49164 EV Error49165 EV Error49166 EV Error49167 EV Error49168 EV Error49169 EV Error49170 EV Error49171 EV Error49172 EV Error49173 EV Error49174 EV Error49175 EV Error49176 EV Error49177 EV Error49178 EV Error49179 EV Error49180 EV Error49181 EV Error49182 EV Error49183 EV Error49184 EV Error49185 EV Error49186 EV Error49187 EV Error49188 EV Error49189 EV Error49190 EV Error49191 EV Error49192 EV Error49193 EV Error49194 EV Error49195 EV Error

49196 EV Error49197 EV Error49198 EV Error49199 EV Error49200 EV Error49201 EV Error49202 EV Error49203 EV Error49204 EV Error49205 EV Error

DescriptionTracing Archiving Retrieval Administration Shopping Storage Indexing Directory Spooling Destruction Agents Reporting Database Restore Tool Admin Service Trace (Admin Service) Agent Client Broker Trace (Agent Client Broker) Archive Service Trace (Archive Service) Directory Service Trace (Directory Service) Index Broker Trace (Index Broker) Index Server Trace (Index Server) Journal Service Trace (Journal Service) Migrator Server Trace (Migrator Server) Public Folder Service Trace (Public Folder Service) Restore Tool Trace (Restore Tool) Retrieval Service Trace (Retrieval Service) Shopping Service Trace (Shopping Service) Storage Archive Trace (Storage Archive) Storage Delete Trace (Storage Delete) Storage File Watch Trace (Storage File Watch) Storage Management Trace (Storage Management) Storage Online

Trace (Storage Online) Storage Replay Index Trace (Storage Replay Index) Storage Restore Trace (Storage Restore) Storage Server Trace (Storage Server) Vault Configuration Trace (Vault Configuration) Admin Console Trace (Admin Console) Web Application Trace (Web Application) Converter Sandbox Trace (Converter Sandbox) Trace Auth Server Trace (Auth Server) Auto Exchange Items Trace (Auto Exchange Items) DVS View Trace (DVS View) Service Control Trace (Service Control) System Info Trace (System Info) View Saveset Trace (View Saveset) PST Migrator Trace (PST Migrator) Restore Tool Trace (Restore Tool) Shortcut Retriever Trace (Shortcut Retriever) Policy Manager Trace (Policy Manager) SPS Service Trace (SPS NT Service) SPS Archiving Server Trace (SPS Archiving Server) Export Archive Wizard Trace (Export Archive Server) SPS Pruning Service Trace (SPS Pruning NT Service) Server Manager Store Server API Server File Placeholder Service

Trace (FSA Placeholder NT Service) File Server Archive Manager File Archive Server Web Application (WP) File Synchronization Server File Pruning Server NetApp File Placeholder Service NetApp File Placeholder Server Not used Task Controller Service Monitoring Not used PST Collector Task Task Guardian Lotus Domino Journaling Task PST Migrator Task Deduplication Cache Storage Crawler Not used Not used Lotus Domino Mailbox Policy Synchronization Task Exchange Provisioning Task Monitoring Configuration Utility Not used Not used NSF Migrator Wizard EVSVR FSA Reporting Service Monitoring Agent Monitoring Middle Tier FSAReporting Web Service Configuration Utility Move Archive Task Domino Retention Plan Tool EVDominoExchangeMigration Tool Not used The saveset %1 has been deleted from vault %2 The user %1 attempted to restore a message into an Exchange mailbox and they were not the mailbox owner or an Administrator <br>e.g.<br> The user ACMEDOM\DOWDEP attempted to restore a message into an Exchange mailbox and they were not the mailbox owner or an AdministratorThe Archiving service for %1 has started (%2) <br>For example:<br> The Archiving service for ACMEEXCH1 has started (5.0.0.5646)The Retrieval service for ACMEEXCH1 has started (5.0.0.5562) The Journal service for STEWART has startedThe Archiving service for %1 has stopped <br>e.g.<br> The Archiving service for UKENG has stopped The Retrieval service for {Exchange Server} has stopped <br>e.g.<br> The Retrieval service for ACMEEXCH1 has stopped The Journal service for {Exchange Server} has stopped <br> e.g.<br> The Journal service for STEWART has stopped The Archiving service for %1 has failed The Retrieval service for %1 has failed An invalid parameter has been passed to the function The Exchange Location class version does not match the stored Exchange location version Failed to build the Exchange Location from structured storage

Failed to write the Exchange Location to structured storage The class should be initialized before calling this function %1 Could not open the Exchange Location resource file The message is already archive pending The message is already a shortcut You cannot make a shortcut archive pending Message is not archive pending Message is not a shortcut, cannot delete message There is no current MAPI session Error getting a IMAPISession interface from the IUnknown interface Cannot delete message as it is not a shortcut or an archive pending message Cannot delete the message body as it is not a shortcut or an archive pending message There is no currently selected shortcut The Exchange Shortcut Accessor class version does not match the stored Exchange Shortcut Accessor version Archiving has been enabled for mailbox %1 <br>e.g.<br> Archiving has been enabled for mailbox /o=Acme/ou=ZKO Administrative Group/cn=Recipients/cn=dowd.ep Archiving has been disabled for mailbox %1 <br>e.g.<br> Archiving has been disabled for mailbox /O=ACME/OU=ZKO/CN=RECIPIENTS/CN=DOWDPCould not enable archiving for user, unable to open mailbox %1 Could not enable archiving for user, unable to open the mailbox folder for mailbox %1 Could not disable archiving for user, unable to open mailbox %1 Could not disable archiving for user, unable to open the mailbox folder for mailbox %1 Failed to initialize the MAPI sub-system Failed to initialize the COM sub-system <p>Failed post the process system message for the ExchangeSystem %1 </p> <p>e.g. Failed post the process system message for the ExchangeSystem EXUSNY1</p>Failed post the process mailbox message for the ExchangeSystem %1, Mailbox %2 Agent message dispenser is starting Agent message dispenser failed to start Message dispenser was returned the failure code %1 when processing message type %2 Message dispenser will suspend processing for 5 minutes due to a recoverable error Message dispenser will resume processing IBackgroundArchivingAgent->ProcessItem() IBackgroundArchivingAgent->ProcessUser(%1) IBackgroundArchivingAgent->ProcessSystem(%1) IRestorationAgentUpdateAgent->RemoveShortcut() IBackgroundArchivingAgent->SavesetAvailable() Failed to update the restoration client for the restore request for item with TransactionID: %1, SavesetID: %2 An invalid location object was detected in function %1, when restoring the saveset with ID %2 IRestorationAgent->CancelRestore() The IRestorationAgent->RestoreItem() function failed whilst processing the item with TransactionID: %1, SavesetID: %2 IRestorationAgent->SavesetAvailable() function failed whilst processing the item with TransactionID: %1, SavesetID: %2 <br>e.g.<br> IRestorationAgent->SavesetAvailable() function failed whilst processing the item with TransactionID: G6TR874KF80B11D781D7004769855A8, SavesetID: 5483230000000000~20011191224270000~0~5KFR47DB45DB40069919F64EBA4D40C The user restore request TransactionID: %1, SavesetID: %2 failed whilst being processed by the storage service <br>e.g.<br> The user restore request TransactionID: C7B961F9D8D54E92888E6C12D1A787C, SavesetID: 639000000000000~200401230634000000~0~7E05C940AC664C7C97DB41695CB764F failed whilst being processed by the storage serviceThe retrieval client could not be notified due to invalid parameters passed to the function IBackgroundArchivingAgent->SavesetAvailable() The IRestorationCallback-RestorationComplete() method failed. Failed to notify restoration client Invalid parameters have been passed to the function %1 Mailbox Report Date: %1 System Name: %2 Mailbox Name: %3 Associated Account: %13 Mailbox State: %18 Mailbox Quota Limit: %14 KB Mailbox Quota Used: %15 KB Percentage of Mailbox Quota free: %16 Number of archivable items in mailbox: %4 Total size of archivable items in mailbox: %5 KB Number of archivable folders in mailbox: %6 Number of items ready to archive: %7 Total size of items ready to archive: %8 KB Number of items that would be archived: %9 Total size of items that would be archived: %10 KB Number of expired shortcuts that would be deleted: %17 Start Time: %11 End Time: %12 Mailbox Report Date: %1 System Name: %2 Mailbox Name: %3 Associated Account: %4 Archiving is disabled for this mailbox Mailbox Report Date: %1 System Name: %2 Mailbox Name: %3 Associated Account: %4 Archiving is suspended for this mailbox Could not scan user mailbox %1, unable to open mailbox Could not scan user mailbox %2, unable to get the entry id of the Deleted Items folder Reason: %1 <br>e.g.<br> Could not scan user mailbox /o=acme/ou=US-ACME/cn=Loadsim Users/cn=EXUSNY2/cn=Nee1t0g3aa, unable to get the entry id of the Deleted Items folder<Br> Reason: <0x8004011b> <br>

Could not scan user mailbox %2, unable to get the users Mailbox folder Reason: %1 Could not scan user mailbox %1, unable to get the state of the users mailbox Could not scan user mailbox %1, unable to get Ids of custom MAPI properties Could not scan user mailbox %2, unable to list folders Error: %1 Reference: %3 <br>e.g.<br> Could not scan user mailbox /O=ACME/OU=NY/CN=RECIPIENTS/CN=DOWDEP, unable to list folders <br> Error: <0x8004011b> <br> Reference: PF_GetFolderTable[2]<br>Could not scan user mailbox %1, unable to select the next folder object Could not scan user mailbox %1, cannot list messages <br>e.g.<br> Could not scan user mailbox The parameter is incorrect. [0x80070057], cannot list messages<br> Could not scan user mailbox %1, cannot list messages <br>e.g.<br> Could not scan user mailbox<br> /o=ACME/ou=ZKOEUROPEENGINEERING/cn=ZKO REO/cn=DowdP, cannot list messages <p>An error occurred whilst processing the message titled: %1 for mailbox: %2, the message will not be archived and could not be changed back from the Archive Pending state. </p> <p></p>An error occurred whilst post processing a message and it could not be changed back from the Archive Pending state. Error that caused the message to be changed back: %1 Error when trying to change the message back: %2 <br>e.g.<br> An error occurred whilst post processing a message and it could not be changed back from the Archive Pending state. Error that caused the message to be changed back: 8004011d Error when trying to change the message back: c0040899 An error occurred opening the Journaling mailbox %1, the journaling service will shut down. An error occurred whilst processing the journal mailbox %1, this mailbox is disabled or suspended from archiving, the journaling service will shut down. An error occurred whilst queuing the message titled: %1 for mailbox: %2 for archival, the message will not be archived and could not be changed back from the Archive Pending state. Could not create the "%1" Queue, call returned %2 Could not Open the "%1" Queue for reading, call returned %2 Could not Open the "%1" Queue for writing, call returned %2 Could not Locate the "%1" Queue, call returned %2 A dispenser thread could not be started, call returned %1 %1 dispenser threads have been started. No dispenser threads could not be started. The Archiving service for <Exchange Server> could not be started due to startup errors. <P>For example:</P> The Archiving service for STEWART could not be started due to startup errors. The Retrieval service for %1 could not be started due to startup errors. The Journaling service for %1 could not be started due to startup errors. <br> For example: The Journaling service for ACMEEXCH1 could not be started due to startup errors.Could not open mailbox %1, mailbox will not be processed Could not get the Message Store entry id for mailbox %2 Reason: %1 Could not get a MAPI session from the session pool whilst processing mailbox %1 The following error was returned: %2. <br>e.g.<br> Could not get a MAPI session from the session pool whilst processing mailbox /o=ACME/ou=ZKO Group/cn=Recipients/cn=dowdep The following error was returned: 80004005.Error processing archiving request for system %1 <br>e.g.<br> Error processing archiving request for system ACMEEXCH1Error processing archiving request for system %1, could not list mailboxes for the Exchange system <BR>e.g.<BR> Error processing archiving request for system /O=ACME /OU=ZKO/cn=Configuration/cn=Servers/cn=ACMEEX1, could not list mailboxes for the Exchange system Failed to queue the process mailbox message for mailbox %1 Error: %2 Failed to queue the process item message for Mailbox %1, Message Title %2 Timed out whilst waiting for the MAPI profile mutex Failed to make the message titled: %1 Archive Pending for Mailbox %2 Failed to make a working copy of message titled: %2 whilst archiving Mailbox %1 Unable to access the directory, %1 This is an example. Details may be quite different.<p> A queued operation exceeded the retry count and has been discarded<p> Enterprise Vault Journaling Service for ACMEEXCH1<p> m_pIBackgroundArchivingAgent->ProcessItem(Priority = "true",<br> ExchangeSystem = "ACMEEXCH1",<br> m_pILocation,<br> (ULONG)EntryIdSize = 70,<br> EntryId,<br> ArchiveId = "1828E94DA5D483744B6E82329221A153A1110000huyton.zko.acme.com",<br> RetentionCategory= "181667B5FEBDAD3119CAB00508B070AE51b10000huyton.zko.acme.com",<br> UserMailboxDn = "/o=ACME/ou=EENGINEERING/cn=Servers/cn=stewart-journal",<br> MessageTitle = "Tax Return",<br> nRetryCount = 3,<br> NULL,<br> CallerSID,<br> isAReArchive = 0, ArchiveTransId = "5E24F8CD11B14E60A60A8443859FF7F", IndexedPropertiesSet = "");<p> HRESULT: 0x80070057 %2 An unknown message with type %1 was removed from the queue and has been discarded An error occurred whilst reading a message from the queue An error occurred whilst processing the "%1" message from the queue The dispenser was asked to repost the message to be retried later The dispenser was asked to shut down without reposting the current message The dispenser will shut down due to an unrecoverable error The dispenser was asked to sleep The dispenser will abort the current item being processed, the item will be requeued for later processing A memory allocation operation failed. The Dispatcher service has been configured with an invalid name, "%1". The name should be of the form "EV_[type]_[guid]" where 'type' is either A, R and J 'guid' is 48 characters max; for example, EV_A_1234ABCD An extended MSMQ error status has been returned, error information follows %1 Could not get a MAPI session from the session pool whilst building a saveset for the message titled %1 in Mailbox %2 The following error was returned: %3. Could not build a saveset for the message titled %1 in Mailbox %2, error getting interface %3 Could not build a saveset for the message titled %1 in Mailbox %2, error getting a unique transaction id %3

Could not build a saveset for the message titled %1 in Mailbox %2, function %3 failed Failed to initialize the service entry, error reading the directory Failed to read the Vault site directory entry with entry id %1 Failed to read the Vault system default filter entry with entry id %1 Failed to read the service entry with entry id %1 Failed to create the scheduling thread for the Archiving service for %1 Failed to read the Site Id from the registry whilst initializing the service The schedule interval supplied in the Agent schedule is invalid, it should be <= 60, its value is %1 Could not get a MAPI session from the session pool whilst post processing an archived item The following error was returned: %1. <br>e.g.<br> Could not get a MAPI session from the session pool whilst post processing an archived item <p> The following error was returned: c00408da.Failed to post process an archived item, failure code %1 NULLNULLError whilst enabling mailbox for user o=Acme/ou=ZKO Administrative Group/cn=Recipients/cn=dowdp, error sending enabled message. <p> Possible Reason: The message file could not be found. <p> Please refer to 'Editing the Welcome Message' in the Administration Help for more information on editing and copying the enabled message file. e.g. Error whilst disabling mailbox for user {mailbox DN}, error sending disabled message <p> Possible Reason:<br> The message file could not be found. <br> Please refer to 'Editing the Welcome Message' in the Administration Help for more information on copying the disabled message file. Error whilst copying message to IStorage, insufficient memory Failed to create a vault for mailbox %1, mailbox will not be enabled or processed Failed to automatically enable the mailbox for %1, mailbox will not be processed Failed to locate the mailbox filter for the mailbox for %1, mailbox will not be processed <br>e.g.<br> Failed to locate the mailbox filter for the mailbox for /o=acme/ou=UK-REO/cn=Recipients/cn=DOWDP, mailbox will not be processedFailed to lookup the NT Account name for the user SID, error creating vault for mailbox /o=exchange/ou=First Administrative Group/cn=Recipients/cn=User.One Failed to lookup Message Queue name for the %1 Agent in the Directory Service on computer %2 Possible Reasons: 1. Failed to connect to the Directory Service 2. Failed to find Service Entry : %3 Failed to calculate the service entry table, unrecognized service entryID %1 Failed to identify client, unrecognized service entryID: ClientID: %1 SaveSetID: %2 VaultID: %3 AgentID: %4 An error occurred whilst reading the message store quotas for the mailbox /o=ACME/ou=NY/cn=REO/cn=Dowdep<br> MAPI Error: 0x8007203A The message submitted for archive has either been deleted or the archive operation has been canceled The message submitted for archive has either been deleted The Archive operation has been canceled Failed to delete the message with savesetID %1 and VaultID %2 Could not get a MAPI session from the session pool whilst processing OperationFailed for an archived item The following error was returned: %1. %1:InitialiseTracingAndSiteIdFromDirectory() Tracing has been switched on at level %2 %1:ServiceMain() Entered routine %1:ServiceMain() COM subsystem is being initialized %1:ServiceMain() The service name is being parsed %1:ServiceMain() The agent service entry is being initialized from the directory %1:ServiceMain() This is the Archiving service %1:ServiceMain() This is the Journaling service %1:ServiceMain() This is the Retrieval service %1:ServiceMain() Creating entries for all this agents queues %1:ServiceMain() Ensure that all required queues are available and usable %1:ServiceMain() Queue not found. Creating new queue using pathname %2 %1:ServiceMain() Queue %2 is available %1:ServiceMain() Get a read handle for the queue %1:ServiceMain() Start the agent scheduler thread %1:ServiceMain() Constructing the dispenser objects and starting their threads %1:ServiceMain() Start the Agent Management Thread %1:ServiceMain() Begin processing the schedule %1:ServiceMain() Release the worker threads %1:ServiceMain() The service has initialized and will wait until it is asked to stop %1:ServiceMain() The service has been asked to stop, and so is ending

%1:ServiceMain() Shutting down the dispensers %1:ServiceMain() Closing down the message queues %1:ServiceMain() Shutting down the scheduler thread %1:ServiceMain() Shutting down the agent management thread %1:ServiceMain() Notify the service control manager that the service is stopped %1:ServiceMain() Exiting routine %1:ControlHandler() The service has been requested to pause %1:ControlHandler() The service has been requested to continue %1:ControlHandler() The service has been requested to stop %1:initializeAgentServiceEntry() Entered routine %1:InitialiseTracingAndSiteIdFromDirectory() The vault Site ID is %2 %1:initializeAgentServiceEntry() Creating the directory connection object %1:initializeAgentServiceEntry() Locating the site object %1:initializeAgentServiceEntry() Reading the site domain, account and password. Then setting RUNAS property in the registry for the AgentClientBroker.exe out of proc server. %1:initializeAgentServiceEntry() Site domain name read as %2 %1:initializeAgentServiceEntry() Read the site account as %2 %1:initializeAgentServiceEntry() Read the site account password as %2 %1:initializeAgentServiceEntry() Formed the site domain account name as %2 %1:initializeAgentServiceEntry() Set the AgentClientBroker.exe launch permissions. Add "Vault Site Account Launch". Add "Everyone Deny Launch" %1:initializeAgentServiceEntry() Read data, including default settings, from the directory service %1:initializeAgentServiceEntry() The default filter guid is %2 %1:initializeAgentServiceEntry() The default system retention category is %2 %1:initializeAgentServiceEntry() The AutoEnableMailboxes flag is set to %2 %1:initializeAgentServiceEntry() The InitiallySuspendArchiving flag is set to %2 %1:initializeAgentServiceEntry() The default indexing level is %2 %1:initializeAgentServiceEntry() The default indexing data is %2 %1:initializeAgentServiceEntry() The default content conversion is %2 %1:initializeAgentServiceEntry() The default indexing service ID is %2 %1:initializeAgentServiceEntry() The default vault store ID is %2 %1:initializeAgentServiceEntry() The default archiving schedule is %2 %1:initializeAgentServiceEntry() Reading the default filter values, using the default filter guid %1:initializeAgentServiceEntry() The maximum messages per user per schedule is %2 %1:initializeAgentServiceEntry() The inactivity period is %2 %1:initializeAgentServiceEntry() The inactivity period units are %2 %1:initializeAgentServiceEntry() The delete after archive flag is set to %2 %1:initializeAgentServiceEntry() The create shortcut after archive flag is set to %2 %1:initializeAgentServiceEntry() The process unread mail flag is set to %2 %1:initializeAgentServiceEntry() The percentage of quota is %2 %1:initializeAgentServiceEntry() The use inactivity period flag is set to %2 %1:initializeAgentServiceEntry() The lock create shortcut after archive flag is set to %2 %1:initializeAgentServiceEntry() The lock delete after archive flag is set to %2 %1:initializeAgentServiceEntry() The lock use inactivity period flag is set to %2 %1:initializeAgentServiceEntry() The lock process unread mail flag is set to %2 %1:initializeAgentServiceEntry() Get the list of message classes to process %1:initializeAgentServiceEntry() Reading the message class %2 %1:initializeAgentServiceEntry() Reading the message class %2 to exclude from archiving %1:initializeAgentServiceEntry() Locate the agent service entry object and read required information %1:initializeAgentServiceEntry() The exchange server is %2

%1:initializeAgentServiceEntry() The exchange privileged mailbox is %2 %1:initializeAgentServiceEntry() The message queue name is %2 %1:initializeAgentServiceEntry() The journal mailbox distinguished name is %2 %1:initializeAgentServiceEntry() The journal vaultID is %2 %1:initializeAgentServiceEntry() Read the agent-specific schedule as we are not using the site settings %1:initializeAgentServiceEntry() We are using the site settings for the agent schedule %1:initializeAgentServiceEntry() The agent specific schedule is %2 %1:initializeAgentServiceEntry() The reporting mode flag is set to %2 %1:initializeAgentServiceEntry() The enable mailbox message filename is %2 %1:initializeAgentServiceEntry() The disable mailbox message filename is %2 %1:initializeAgentServiceEntry() The maximum number of retry attempts is %2 %1:initializeAgentServiceEntry() The number of threads is %2 %1:initializeAgentServiceEntry() Give me a comment MATT %1:initializeAgentServiceEntry() Exiting routine %1:CAgentSchedule::Control() Beginning shutdown. Waiting for main thread to finish before returning %1:CAgentSchedule::ProcessSchedule() Entered routine. %1:CAgentSchedule::ProcessSchedule() Starting to process the schedule %1:CAgentSchedule::ProcessSchedule() We are in a scheduled period. Queuing a process system message %1:CAgentSchedule::ProcessSchedule() The scheduler is shutting down. %1:CAgentSchedule::ProcessSchedule() Exiting routine %1:CAgentSchedule::InScheduledPeriod() We are starting a new scheduled period %1:CAgentSchedule::QueueAProcessSystemMessage() Entered routine %1:CAgentSchedule::QueueAProcessMailboxMessage() Entered routine %1:CAgentSchedule::QueueAProcessSystemMessage() There was no message queued. Queuing new message %1:CAgentSchedule::QueueAProcessSystemMessage() Exiting routine at point A %1:CAgentSchedule::QueueAProcessSystemMessage() Exiting routine at point B %1:CAgentSchedule::QueueAProcessMailboxMessage() Exiting routine at point A %1:CAgentSchedule::QueueAProcessMailboxMessage() Exiting routine at point B %1:CAgentManage::DoManagement() Entered routine %1:CAgentManage::DoManagement() Starting agent management %1:CAgentManage::DoManagement() AgentClientBroker.exe is not running. Attempting to start it %1:CAgentManage::DoManagement() AgentClientBroker.exe has started %1:CAgentManage::DoManagement() The agent management is shutting down %1:CAgentManage::DoManagement() Exiting routine %1:CAgentManage::Control() Beginning shutdown. Waiting for main thread to finish before returning %1:AgentMessageDispenser::initialize() Entered Routine %1:AgentMessageDispenser::initialize() Creating the exchange archiving agent object %1:AgentMessageDispenser::initialize() Creating the exchange restoration agent object %1:AgentMessageDispenser::initialize() Getting all the other supported interfaces %1:AgentMessageDispenser::initialize() Creating the exchange mailbox management object %1:AgentMessageDispenser::initialize() Creating the exchange shortcut accessor object %1:AgentMessageDispenser::initialize() Creating the exchange location object %1:AgentMessageDispenser::initialize() Creating the exchange archivable item object %1:AgentMessageDispenser::initialize() Creating our work thread %1:AgentMessageDispenser::initialize() Exiting routine %1:AgentMessageDispenser::ProcessMessages() Entering routine %1:AgentMessageDispenser::ProcessMessages() We have not yet been initialized. Returning. %1:AgentMessageDispenser::ProcessMessages() The service entry mutex has been signaled

%1:AgentMessageDispenser::ProcessMessages() Exiting routine %1:AgentMessageDispenser::Control() Beginning shutdown. Waiting for main thread to finish before returning %1:AgentMessageDispenser::ProcessNextMessage() Retrieved a message successfully from the queue %1:AgentMessageDispenser::ProcessNextMessage() Exceeded the maximum retry count for this message (%2). Will write to the event log. %1:AgentMessageDispenser::ProcessNextMessage() Read new message or a message that is within its retry limit (%2). About to process the message body %1:AgentMessageDispenser::ProcessNextMessage() ActivateObject has returned successfully %1:AgentMessageDispenser::ProcessNextMessage() ActivateObject has returned failure %1:AgentMessageDispenser::ProcessNextMessage() Activate object returned with status AGENTS_E_DISPRETRY. The retry count will be incremented, and the message reposted to the end of the queue %1:AgentMessageDispenser::ProcessNextMessage() Activate object returned with status AGENTS_E_DISPSLEEP. A worker thread has asked the service to sleep for a time period. Setting the current time in agent entry and then telling worker threads to sleep. The message will be reposted to the end of the queue %1:AgentMessageDispenser::ProcessNextMessage() Activate object returned with status AGENTS_E_DISPABORTITEM. The dispenser has aborted the processing of the item. This failure will be processed by dropping through to the AGENTS_E_DISPABORT case section %1:AgentMessageDispenser::ProcessNextMessage() Activate object returned with status AGENTS_E_DISPABORT. The dispenser has been told to stop. The current message will be reposted to the end of the queue and the current transaction will be committed. Its retry count will NOT be incremented %1:AgentMessageDispenser::ProcessNextMessage() The message queue error was MQ_ERROR_REMOTE_MACHINE_NOT_AVAILABLE. This failure will be processed by dropping through to the "default" case section %1:AgentMessageDispenser::ProcessNextMessage() A message queue error was received which we don't explicitly want to handle. We will act as if we have been asked to sleep for a while %1:AgentMessageDispenser::ActivateObject() Entering routine %1:AgentMessageDispenser::ActivateObject() Message type indicator = %2. Will fall through to be handled by the case for %2Imp %1:AgentMessageDispenser::ActivateObject() Message type indicator = %2 %1:AgentMessageDispenser::ActivateObject() Message type indicator = %2 %1:AgentMessageDispenser::ActivateObject() Unknown message type. Will be handled by the default case %1:AgentMessageDispenser::ActivateObject() Called server side object, with arguments: %2 %1:AgentMessageDispenser::ActivateObject() MAPI error = %2. This is a recoverable error so we will sleep and have another go later. We will not update the retry count NULL%1:AgentMessageDispenser::ActivateObject() Error message = RETRIEVAL_UPDATERESTORATIONCLIENT. The restoration agent has failed to notify a Restoration client, so abort the current message and report to the back of the message queue. We will not up the retry count %1:AgentMessageDispenser::ActivateObject() Error message = AGENTS_I_AMD_AO_ARCHIVING_E_COPYTOFAILED. This will fall through to be handled by the default case %1:AgentMessageDispenser::ActivateObject() An error that we do not specifically recognize has occurred, so we'll just increment this messages retry count %1:AgentMessageDispenser::ActivateObject() Exiting routine at point A %1:AgentMessageDispenser::ActivateObject() Exiting routine at point B %1:CArchivingAgent::ProcessSystem() Entering routine %1:CArchivingAgent::MainProcessSystem() Getting a MAPI session from the session pool %1:CArchivingAgent::ProcessMailboxesInChunks() Opening message queue %2 %1:CArchivingAgent::ProcessMailboxesInChunks() Listing mailbox distinguished names %1:CArchivingAgent::QueueChunkOfMailboxes() Queuing a message for each mailbox on the exchange system %1:CArchivingAgent::QueueChunkOfMailboxes() Queuing message for mailbox on implicit message queue %1:CArchivingAgent::QueueChunkOfMailboxes() Queuing message for mailbox on non implicit message queue %1:CArchivingAgent::QueueChunkOfMailboxes() Committing the transaction %1:CArchivingAgent::QueueChunkOfMailboxes() Aborting the transaction %1:CArchivingAgent::MainProcessSystem() Return the MAPI session to the session pool %1:CArchivingAgent::ProcessSystem() Exiting routine %1:CArchivingAgent::ProcessUser() Entering routine %1:CArchivingAgent::ProcessUser() Getting a MAPI session from the session pool %1:CArchivingAgent::ProcessUser() We are not the journal agent and this is the journal mailbox, so ignoring it %1:CArchivingAgent::ProcessUser() We are the Journal agent. Marking the this mailbox as the Journal mailbox %1:CArchivingAgent::ProcessUser() Creating the Entry ID of user mailbox to be processed %1:CArchivingAgent::ProcessUser() Open users message store %1:CArchivingAgent::ProcessUser() Attempt to open the users message store resulted in failure with error message = MAPI_E_NOT_FOUND Message will drop through to be handled by the next case %1:CArchivingAgent::ProcessUser() Attempt to open the users message store resulted in failure with error message = MAPI_E_FAILONEPROVIDER This is because the mailbox does not exist. This often happens when processing utility accounts like site connectors, or when mailboxes have been deleted after a process mailbox message has been queued %1:CArchivingAgent::ProcessUser() Attempt to open the users message store resulted in failure with error message = MAPI_E_NETWORK_ERROR Message will drop through to be handled by the "default" case %1:CArchivingAgent::ProcessUser() Attempt to open the users message store resulted in failure with an error message that we do not specifically recognize. Leaving routine %1:CArchivingAgent::ProcessUser() Getting the entry ID of the mailbox wastebasket or deleted items folder

%1:CArchivingAgent::ProcessUser() Getting the users mailbox folder and state. %1:CArchivingAgent::ProcessUser() Creating a Vault for the user %1:CArchivingAgent::ProcessUser() Enabling the users mailbox %1:CArchivingAgent::ProcessUser() This users mailbox is disabled %1:CArchivingAgent::ProcessUser() We have an enabled mailbox that is ready for processing. %1:CArchivingAgent::ProcessUser() Reading users quota limit and current usage %1:CArchivingAgent::ProcessUser() Ignoring mailbox as we are performing percentage archiving and the user has no quota limits applied. %1:CArchivingAgent::ProcessUser() Ignoring mailbox as we are performing percentage archiving but it is already within specified quota limits %1:CArchivingAgent::ProcessUser() Processing all the sub folders of the current folder %1:CArchivingAgent::ProcessUser() Making all selected messages Archive Pending, and queuing a Process Item message to MSMQ for each message %1:CArchivingAgent::ProcessUser() Return the MAPI session to the session pool %1:CArchivingAgent::ProcessUser() Exiting routine %1:CArchivingAgent::ProcessUser() The mailbox filter value is %2 %1:CArchivingAgent::ProcessMessages() Entering routine %1:CArchivingAgent::ProcessMessages() Exiting routine %1:CArchivingAgent::IsEligibleForArchive() Entering routine %1:CArchivingAgent::IsEligibleForArchive() Exiting routine %1:CArchivingAgent::IsEligibleForArchive(%3) The message titled: %2 will not be archived as it has the Do Not Archive property set %1:CArchivingAgent::IsEligibleForArchive(%3) The message titled: %2 will not be archived as it is Unread %1:CArchivingAgent::IsEligibleForArchive(%3) The message titled: %2 will not be archived as it is Unsent %1:CArchivingAgent::IsEligibleForArchive(%3) The message titled: %2 will not be archived as it is Deferred %1:CArchivingAgent::IsEligibleForArchive(%3) The message titled: %2 is eligible for archive %1:CArchivingAgent::IsEligibleForArchive(%3) The message titled: %2 will not be archived due %1:CArchivingAgent::IsEligibleForArchive(%3) The message titled: %2 will not be archived as it has not been modified since it was restored %1:CArchivingAgent::IsEligibleForArchive(%3) The message titled: %2 will not be archived as it has not been modified since it was archived %1:CArchivingAgent::IsEligibleForArchive(%3) The message titled: %2 will not be archived as its inactivity period has not expired %1:CArchivingAgent::IsEligibleForArchive(%4) The message titled: %2 has a retention category with the value %3 applied %1:CArchivingAgent::IsEligibleForArchive(%4) The message titled: %2 has the retention category of its parent folder its value is %3 %1:CArchivingAgent::IsEligibleForArchive(%3) The message titled: %2 will not be archived as it has a NULL retention category %1:CArchivingAgent::ProcessFolders() Entering routine %1:CArchivingAgent::ProcessFolders() Exiting routine %1:CArchivingAgent::PF_SetFilterAndRetention() Using the filter applied to the current folder %2 %1:CArchivingAgent::PF_SetFilterAndRetention() There is no current folder filter for the folder %2, so the parent folder filter will be used %1:CArchivingAgent::PF_SetFilterAndRetention() The filter value applied to the folder %2 is %3 %1:CArchivingAgent::PF_SetFilterAndRetention() The VaultId value applied to the folder %2 is %3 %1:CArchivingAgent::PF_FolderPermissionCheck() The user %2 has write access to the vault VaultId %3 as specified on the folder %4 %1:CArchivingAgent::PF_SetFilterAndRetention() The Retention Category value applied to the folder %2 is %3 %1:CArchivingAgent::ProcessItem() Entering routine %1:CArchivingAgent::ProcessItem() Getting a MAPI session from the session pool %1:CArchivingAgent::ProcessItem() Creating a unique transaction Id string for use in the Saveset. %1:CArchivingAgent::ProcessItem() Creating interface pointers and objects %1:CArchivingAgent::ProcessItem() Building the Exchange Shortcut Accessor object using the message entry ID %1:CArchivingAgent::ProcessItem() Building the Exchange Archivable Item object using the Exchange Location object %1:CArchivingAgent::ProcessItem() Checking that the specified Vault is available %1:CArchivingAgent::ProcessItem() The message we wish to archive is larger than 4MB in size, so we will build the saveset using a file %1:CArchivingAgent::ProcessItem() The message we wish to archive is smaller than 4MB in size, so we will build the saveset in memory %1:CArchivingAgent::ProcessItem() Writing the Archive ID of the message to the saveset %1:CArchivingAgent::ProcessItem() Writing the retention category of the message to the saveset

%1:CArchivingAgent::ProcessItem() Writing the Location object to the saveset %1:CArchivingAgent::ProcessItem() Write the Shortcut Accessor object to the saveset %1:CArchivingAgent::ProcessItem() Write the shared Archivable Item object to the Saveset %1:CArchivingAgent::ProcessItem() Write the user Archivable Item object to the Saveset %1:CArchivingAgent::ProcessItem() Getting the messages sent (or modified) date and writing it to the Saveset %1:CArchivingAgent::ProcessItem() Getting the messages checksum and writing it to the Saveset %1:CArchivingAgent::ProcessItem() Writing the original message class to the saveset %1:CArchivingAgent::ProcessItem() Writing the messages file extension to the saveset %1:CArchivingAgent::ProcessItem() Calling the storage service and passing the freshly built Saveset to it %1:CArchivingAgent::ProcessItem() We could not build a saveset for the specified item as either the archive pending message has been deleted, or the user canceled the archive operation. The message will not be archived %1:CArchivingAgent::ProcessItem() The Vault is unavailable for archiving. Undoing the archive pending message in the users mailbox %1:CArchivingAgent::ProcessItem() Something has gone wrong and this has been our last retry. We will undo the archive pending message in the users mailbox, so leaving it as a normal message again %1:CArchivingAgent::ProcessItem() Return the MAPI session to the session pool %1:CArchivingAgent::ProcessItem() Exiting routine %1:CArchivingAgent::SetAccessDetails() Entering routine %1:CArchivingAgent::SetAccessDetails() Setting, or resetting, VaultSiteId, ExchangeServerName, ExchangePrivMbxName, AgentGuid and MessageQueueName %1:CArchivingAgent::SetAccessDetails() Creating CMAPISession object %1:CArchivingAgent::SetAccessDetails() Exiting routine at point A %1:CArchivingAgent::SetAccessDetails() Exiting routine at point B %1:CArchivingAgent::OperationFailed() Entering routine %1:CArchivingAgent::OperationFailed() Getting a MAPI session from the session pool %1:CArchivingAgent::OperationFailed() Undoing any changes to the Pending Archive item %1:CArchivingAgent::OperationFailed() Return the MAPI session to the session pool %1:CArchivingAgent::OperationFailed() Exiting routine %1:CArchivingAgent::PostProcessArchivedItem() Entering routine %1:CArchivingAgent::PostProcessArchivedItem() Getting a MAPI session from the session pool %1:CArchivingAgent::PostProcessArchivedItem() Getting ExchangeShortcutAccessor interface %1:CArchivingAgent::PostProcessArchivedItem() Getting ExchangeLocation interface %1:CArchivingAgent::PostProcessArchivedItem() Setting the context for the shortcut accessor %1:CArchivingAgent::PostProcessArchivedItem() The archive pending message has been deleted %1:CArchivingAgent::PostProcessArchivedItem() The archive operation has been canceled %1:CArchivingAgent::PostProcessArchivedItem() Setting the SavesetID on the shortcut %1:CArchivingAgent::PostProcessArchivedItem() Getting the value of the createShortcut flag from the Shortcut message %1:CArchivingAgent::PostProcessArchivedItem() Attempting to delete the body of the shortcut %1:CArchivingAgent::PostProcessArchivedItem() Attempting to delete the Archive Pending message %1:CArchivingAgent::PostProcessArchivedItem() Either the Archive Pending message has been deleted or the Archive Operation has been canceled %1:CArchivingAgent::PostProcessArchivedItem() The archive operation was canceled, so the Archive Pending message will be removed from the queue and no further processing done. The archived messages from the storage service and the index service will be deleted. %1:CArchivingAgent::PostProcessArchivedItem() Something has gone wrong and this has been our last retry. We will undo the archive pending message in the users mailbox, so leaving it as a normal message again %1:CArchivingAgent::PostProcessArchivedItem() Return the MAPI session to the session pool %1:CArchivingAgent::PostProcessArchivedItem() Exiting routine %1:CArchivingAgent::ArchiveItem() Entering routine %1:CArchivingAgent::ArchiveItem() Getting a MAPI session from the session pool %1:CArchivingAgent::ArchiveItem() Getting the message store entry id of the mailbox that the message is being archived from %1:CArchivingAgent::ArchiveItem() Checking that archive requester is either the mailbox owner or an administrator %1:CArchivingAgent::ArchiveItem() Get the MessageEntryId from the item being archived %1:CArchivingAgent::ArchiveItem() Something has gone wrong. Calling OperationFailed to undo the Marked For Archive status on the message %1:CArchivingAgent::ArchiveItem() Everything has been successful up to this point, so we are going ahead and calling ProcessItem. %1:CArchivingAgent::ArchiveItem() Return the MAPI session to the session pool

%1:CArchivingAgent::ArchiveItem() Exiting routine %1:CArchivingAgent::CancelArchive() Entering routine %1:CArchivingAgent::CancelArchive() Exiting routine %1:CArchivingAgentQueue::ArchiveItem() Entering routine %1:CArchivingAgentQueue::ArchiveItem() Checking callers Vault access privileges %1:CArchivingAgentQueue::ArchiveItem() The label for this message queue entry will be = %2 %1:CArchivingAgentQueue::ArchiveItem() Writing %2 to ArchiveItem buffer %1:CArchivingAgentQueue::ArchiveItem() Sending the Message Queue message MsgID_ArchiveItem with the constructed buffer %1:CArchivingAgentQueue::ArchiveItem() Exiting routine %1:CArchivingAgentQueue::ArchiveItemNoCallBack() Entering routine %1:CArchivingAgentQueue::ArchiveItemNoCallBack() Checking callers Vault access privileges %1:CArchivingAgentQueue::ArchiveItemNoCallBack() The label for this message queue entry will be = %2 %1:CArchivingAgentQueue::ArchiveItemNoCallBack() Writing %2 to ArchiveItem buffer %1:CArchivingAgentQueue::ArchiveItemNoCallBack() Sending the Message Queue message MsgID_ArchiveItem with the constructed buffer %1:CArchivingAgentQueue::ArchiveItemNoCallBack() Exiting routine %1:CArchivingAgentQueue::DeleteShortcut() Entering routine %1:CArchivingAgentQueue::DeleteShortcut() The label for this message queue entry will be = %2 %1:CArchivingAgentQueue::DeleteShortcut() Checking callers Vault access privileges. User must be an administrator to perform this operation %1:CArchivingAgentQueue::DeleteShortcut() Writing %2 to DeleteShortcut buffer %1:CArchivingAgentQueue::DeleteShortcut() Sending the Message Queue message MsgID_ArchiveDeleteShortcut with the constructed buffer %1:CArchivingAgentQueue::DeleteShortcut() Exiting routine %1:CArchivingAgentQueue::OperationFailed() Entering routine %1:CArchivingAgentQueue::OperationFailed() The label for this message queue entry will be = %2 %1:CArchivingAgentQueue::OperationFailed() Writing %2 to OperationFailed buffer %1:CArchivingAgentQueue::OperationFailed() Sending the Message Queue message MsgID_ArchiveOperationFailed with the constructed buffer %1:CArchivingAgentQueue::OperationFailed() Exiting routine %1:CArchivingAgentQueue::PostProcessArchivedItem() Entering routine %1:CArchivingAgentQueue::PostProcessArchivedItem() The label for this message queue entry will be = %2 %1:CArchivingAgentQueue::PostProcessArchivedItem() Writing %2 to PostProcessArchivedItem buffer %1:CArchivingAgentQueue::PostProcessArchivedItem() Sending the Message Queue message MsgID_RemoveBody with the constructed buffer %1:CArchivingAgentQueue::PostProcessArchivedItem() Exiting routine %1:CArchivingAgentQueue::ProcessItem() Entering routine %1:CArchivingAgentQueue::ProcessItem() The label for this message queue entry will be = %2 %1:CArchivingAgentQueue::ProcessItem() Writing %2 to ProcessItem buffer %1:CArchivingAgentQueue::ProcessItem() Sending the Message Queue message %2 with the constructed buffer %1:CArchivingAgentQueue::ProcessItem() Exiting routine %1:CArchivingAgentQueue::ProcessSystem() Entering routine %1:CArchivingAgentQueue::QueueASystemMessage() The label for this message queue entry will be = %2 %1:CArchivingAgentQueue::QueueASystemMessage() Checking callers Vault access privileges. User must be an administrator to perform this operation %1:CArchivingAgentQueue::QueueASystemMessage() Writing %2 to message buffer %1:CArchivingAgentQueue::QueueASystemMessage() Sending the Message Queue message %2 with the constructed buffer %1:CArchivingAgentQueue::ProcessSystem() Exiting routine %1:CArchivingAgentQueue::ProcessUser() Entering routine %1:CArchivingAgentQueue::ProcessUser() The label for this message queue entry will be = %2 %1:CArchivingAgentQueue::ProcessUser() Checking callers Vault access privileges. User must be an administrator to perform this operation %1:CArchivingAgentQueue::ProcessUser() Writing %2 to ProcessUser buffer %1:CArchivingAgentQueue::ProcessUser() Sending the Message Queue message %2 with the constructed buffer %1:CArchivingAgentQueue::ProcessUser() Exiting routine

%1:CArchivingAgentQueue::RestoreItem() Entering routine %1:CArchivingAgentQueue::RestoreItem() The label for this message queue entry will be = %2 %1:CArchivingAgentQueue::RestoreItem() Checking callers Vault access privileges %1:CArchivingAgentQueue::RestoreItem() Writing %2 to RestoreItem buffer %1:CArchivingAgentQueue::RestoreItem() Sending the Message Queue message MsgID_RestoreItem with the constructed buffer %1:CArchivingAgentQueue::RestoreItem() Exiting routine %1:CArchivingAgentQueue::RestoreItemNoCallback() Entering routine %1:CArchivingAgentQueue::RestoreItemNoCallback() The label for this message queue entry will be = %2 %1:CArchivingAgentQueue::RestoreItemNoCallback() Checking callers Vault access privileges %1:CArchivingAgentQueue::RestoreItemNoCallback() Writing %2 to RestoreItem buffer %1:CArchivingAgentQueue::RestoreItemNoCallback() Sending the Message Queue message MsgID_RestoreItem with the constructed buffer %1:CArchivingAgentQueue::RestoreItemNoCallback() Exiting routine %1:CArchivingAgentQueue::RemoveShortcut() Entering routine %1:CArchivingAgentQueue::RemoveShortcut() The label for this message queue entry will be = %2 %1:CArchivingAgentQueue::RemoveShortcut() Writing %2 to RemoveShortcut buffer %1:CArchivingAgentQueue::RemoveShortcut() Sending the Message Queue message MsgID_RestoreRemoveShortcut with the constructed buffer %1:CArchivingAgentQueue::RemoveShortcut() Exiting routine %1:CArchivingAgentQueue::SavesetAvailable() Entering routine %1:CArchivingAgentQueue::SavesetAvailable() The label for this message queue entry will be = %2 %1:CArchivingAgentQueue::SavesetAvailable() Writing %2 to SavesetAvailable buffer %1:CArchivingAgentQueue::SavesetAvailable() Sending the Message Queue message MsgID_SavesetAvailable with the constructed buffer %1:CArchivingAgentQueue::SavesetAvailable() Exiting routine %1:CArchivingAgentQueue::CheckCallersVaultAccess() Checking callers' Vault access rights on read-only : %2 Entering routine %1:CArchivingAgentQueue::CheckCallersVaultAccess() This users account name is "%2" and their domain is "%3" %1:CArchivingAgentQueue::CheckCallersVaultAccess() User was found in permissions cache so has already been validated %1:CArchivingAgentQueue::CheckCallersVaultAccess() User wasn't found in permissions cache, so lookup caller permissions from the directory service %1:CArchivingAgentQueue::CheckCallersVaultAccess() Caller permissions have been read from the directory service and has been cached for future calls %1:CArchivingAgentQueue::CheckCallersVaultAccess() User wasn't found in directory lookup, so check to see if user is an administrator %1:CArchivingAgentQueue::CheckCallersVaultAccess() User is an Administrator, and thus has permission to restore on behalf of a user. User has been cached for future calls %1:CArchivingAgentQueue::CheckCallersVaultAccess() Exiting routine %1:CArchivingAgent::CheckUserVaultAccess() Entering routine %1:CArchivingAgent::CheckUserVaultAccess() This users account name is "%2" and their domain is "%3" %1:CArchivingAgent::CheckUserVaultAccess() User was found in permissions cache so has already been validated %1:CArchivingAgent::CheckUserVaultAccess() User wasn't found in permissions cache, so lookup caller permissions from the directory service %1:CArchivingAgent::CheckUserVaultAccess() Caller permissions have been read from the directory service and has been cached for future calls %1:CArchivingAgent::CheckUserVaultAccess() User wasn't found in directory lookup, so check to see if user is an administrator %1:CArchivingAgent::CheckUserVaultAccess() Exiting routine %1:CArchivingAgentQueue::GetCallerSID() Entering routine %1:CArchivingAgentQueue::GetCallerSID() This users account name is "%2" and their domain is "%3" %1:CArchivingAgentQueue::GetCallerSID() Exiting routine %1:CArchivingAgentQueue::GetQueueBase() Entering routine %1:CArchivingAgentQueue::GetQueueBase() Attempting to read the queue base from the cache %1:CArchivingAgentQueue::GetQueueBase() Retrieved the queue base from the cache %1:CArchivingAgentQueue::GetQueueBase() Could not get the queue base from the cache. Attempting to read it from the directory service %1:CArchivingAgentQueue::GetQueueBase() Retrieved the queue base from the directory service. Writing it to the cache for future reads %1:CArchivingAgentQueue::GetQueueBase() Exiting routine at point %2 %1:CArchivingAgentQueue::SendMQMessage() Entering routine %1:CArchivingAgentQueue::SendMQMessage() Built the MSMQ path = "%2"

%1:CArchivingAgentQueue::SendMQMessage() Attempting to read the open message queue handle from the cache %1:CArchivingAgentQueue::SendMQMessage() Retrieved the open message queue handle from the cache %1:CArchivingAgentQueue::SendMQMessage() Could not get the message queue handle from the cache. Attempting to open a new queue handle %1:CArchivingAgentQueue::SendMQMessage() Opened a new queue handle. Writing it to the cache for future reads %1:CArchivingAgentQueue::SendMQMessage() Defining message properties %1:CArchivingAgentQueue::SendMQMessage() Beginning MSMQ transaction %1:CArchivingAgentQueue::SendMQMessage() Sending message %1:CArchivingAgentQueue::SendMQMessage() Committing transaction %1:CArchivingAgentQueue::SendMQMessage() Aborting transaction %1:CArchivingAgentQueue::SendMQMessage() Exiting routine %1:CRestorationAgent::RestoreItem() Entering routine %1:CRestorationAgent::RestoreItem() The retry count for this message is %2 %1:CRestorationAgent::RestoreItem() Writing %2 to RestoreItem buffer %1:CRestorationAgent::RestoreItem() Calling storage service, and passing it a restore request %1:CRestorationAgent::RestoreItem() Failed again, and exceeded the retry count so telling the restoration client that the restore has failed %1:CRestorationAgent::RestoreItem() Exiting routine %1:CRestorationAgent::CancelRestore() Entering routine %1:CRestorationAgent::CancelRestore() Exiting routine %1:CRestorationAgent::SetAccessDetails() Entering routine %1:CRestorationAgent::SetAccessDetails() Setting, or resetting, VaultSiteId, ExchangeServerName, ExchangePrivMbxName, AgentGuid and MessageQueueName %1:CRestorationAgent::SetAccessDetails() Creating CMAPISession object %1:CRestorationAgent::SetAccessDetails() Exiting routine at point %2 %1:CRestorationAgent::UpdateShoppingBasket() Entering routine %1:CRestorationAgent::UpdateShoppingBasket() Getting an interface to the shopping service %1:CRestorationAgent::UpdateShoppingBasket() Getting shopping service entry from the directory service %1:CRestorationAgent::UpdateShoppingBasket() Got the Computer Entry ID = "%2" %1:CRestorationAgent::UpdateShoppingBasket() Getting the ComputerEntry table for the Shopping Service's computer %1:CRestorationAgent::UpdateShoppingBasket() Retrieved the shopping service computer name = "%2" %1:CRestorationAgent::UpdateShoppingBasket() Setting up the DCOM parameters %1:CRestorationAgent::UpdateShoppingBasket() Calling RestorationComplete with the TransactionId = "%2", and the SavesetId = "%3" %1:CRestorationAgent::UpdateShoppingBasket() Exiting routine successfully %1:CRestorationAgent::UpdateShoppingBasket() Exiting routine as we have failed. Requeuing the message to try again later Error Returned %2 %1:CRestorationAgent::OperationFailed() Entering routine %1:CRestorationAgent::OperationFailed() Getting a MAPI session from the session pool %1:CRestorationAgent::OperationFailed() Notify the restoration client that the message failed to be restored %1:CRestorationAgent::OperationFailed() Unpacking %2 from the agent parameters %1:CRestorationAgent::OperationFailed() Return the MAPI session to the session pool %1:CRestorationAgent::OperationFailed() Exiting routine %1:CRestorationAgent::RemoveShortcut() Entering routine %1:CRestorationAgent::RemoveShortcut() Getting a MAPI session from the session pool %1:CRestorationAgent::RemoveShortcut() Deleting shortcut %1:CRestorationAgent::RemoveShortcut() Return the MAPI session to the session pool %1:CRestorationAgent::RemoveShortcut() Exiting routine %1:CRestorationAgent::SavesetAvailable() Entering routine %1:CRestorationAgent::SavesetAvailable() The retry count for this message is %2 %1:CRestorationAgent::SavesetAvailable() Getting a MAPI session from the session pool %1:CRestorationAgent::SavesetAvailable() Getting %2 interface %1:CRestorationAgent::SavesetAvailable() Unpacking %2 from the agent parameters

%1:CRestorationAgent::SavesetAvailable() Open shared ArchivableItem %1:CRestorationAgent::SavesetAvailable() Open the per user archivable item %1:CRestorationAgent::SavesetAvailable() Extract the location object as we are restoring it to the original location, because we haven't been passed an alternative %1:CRestorationAgent::SavesetAvailable() Extract the shortcut object as we haven't been passed an alternative %1:CRestorationAgent::SavesetAvailable() Checking the privileges for this operation. The caller must be either the owner of the mailbox or an administrator %1:CRestorationAgent::SavesetAvailable() Writing the restored archivable item back into the users mailbox %1:CRestorationAgent::SavesetAvailable() Write the shared message attributes onto the message %1:CRestorationAgent::SavesetAvailable() Write the per user message attributes onto the message %1:CRestorationAgent::SavesetAvailable() Notifying the restoration client that the message has been restored successfully %1:CRestorationAgent::SavesetAvailable() The restore operation has failed and we have exceeded our retry count. Notifying client that the operation failed %1:CRestorationAgent::SavesetAvailable() Return the MAPI session to the session pool %1:CRestorationAgent::SavesetAvailable() Exiting routine An error occurred created the security information descriptor for the MSMQ queue %1 Failed to create the agent management thread for the Archiving service for %1 Failed to create the agent management thread for the Retrieval service for %1 Failed to read the Site Id from the registry whilst calling the AgentClientBroker.Exe Client request refused due to insufficient privileges, user %1 attempted to access the Vault: Vault Name: %2 Vault Id: %3 but did not have %4 access The call %1 is not available via the AgentClientBroker.Exe, it can only be made via the AgentMSMQProxyDLL.DLL The Call %1 in not implemented in this version The Call %1 cannot be called by clients The Agent failed to create the AgentClientBroker.Exe with the following error %1, the service will shut down <P>For example:<br> The Agent failed to create the AgentClientBroker.Exe with the following error 80070008, the service will shut down Client call %1 failed due to insufficient privileges, user %2 is not an administrator An exception occurred whilst reading the QueueBaseCache in CArchivingAgentQueue::GetQueueBase() An exception occurred whilst reading the MSMQHandleCache in CArchivingAgentQueue::SendMQMessage() An exception occurred whilst reading the Vault Permissions Cache in %1 CArchivingAgentQueue::CheckCallersVaultAccess() The Specified user was found in the cache The Specified user was not found in the cache An error occurred adding the following key value %1 to the Vault permission cache The vault with vaultID %1 is currently unavailable The SiteID of the mailbox %1 does not match the siteID of the Archiving Service, the mailbox has been reset. The user %1 attempted to archive a message from an Exchange mailbox where they are not the mailbox owner or an Administrator <br>e.g.<br> The user ACMEDOM\DOWDE attempted to archive a message from an Exchange mailbox where they are not the mailbox owner or an Administrator The service failed to start as a null Site Account Domain Name was specified The service failed to start as a null Site Account name was specified The service failed to start as a null Exchange Server name was specified The service failed to start as a null Exchange Mailbox name was specified The service failed to start as a null MSMQ Queue name prefix was specified The service failed to start as a null default filter was specified The service failed to start as a null default retention category was specified The service failed to start as a null default indexing service was specified The service failed to start as a null default vault store was specified The service failed to start as a null schedule was specified The service failed to start as a null journal mailbox distinguished name was specified Error creating event object for Archive Agent Nack Handler Error creating event object for Restore Agent Nack Handler Error creating Archive Agent Nack Handler thread Error creating Restore Agent Nack Handler thread The service failed to start as a null journal vaultID was specified Mailboxes will not be automatically enabled due to a null DefaultIndexingServiceId specified at the site

Mailboxes will not be automatically enabled due to a null DefaultVaultStoreId specified at the site The mailbox %1 has been disabled for archiving Failed to disable the mailbox %1 for archiving Failed to read the Message Classes from the Directory Failed to read entries from the Directory Failed to start the Archiving agent for %1, the MSMQ queues could not be opened. Failed to start the Retrieval Agent for %1, the MSMQ queues could not be opened. Failed to start the Journal Agent for %1, the MSMQ queues could not be opened. The message with a label value of %1 and message body size %2 could not be queued as it exceeds the maximum message body size. The maximum message body size is %3 The message with a label value of %1 and message body size %2 could not be queued as it exceeds the maximum message body size. The maximum message body size is %3 The message with a label value of %1 and message body size %2 could not be queued as it exceeds the maximum message body size. The maximum message body size is %3 e.g.<br> An exception occurred in routine CEx2kMailboxPermissions::CheckAdMailboxRights() The mailbox: %1 does NOT have write access to the following vault: Vault Name: %2 VaultId: %3 This is specified on the folder: %4. All messages within this folder will be ignored. The error %1 occurred whilst calling the method %2 <br>e.g.<br> The error c00e0056 occurred whilst calling the method CArchivingAgentQueue::ArchiveItemNoCallBack() Failed to obtain Format Name of queue "%1 Error creating event object for Archive Service Nack Handler Error creating Archive Service Nack Handler thread Error getting MSMQ machine properties %1 Error opening MSMQ Dead Letter Queue - Access is denied for queue %1 Using MSMQ Explorer, edit the permissions of the Computer on which the queue resides. Ensure that the local Administrators group has "Full Control" access. The computer properties to modify will be those of the system on which this error is logged. This can be verified by checking that the ID of the computer (displayed within the General tab of the Computer properties) corresponds with the queue name within this message Error allocating memory Error occurred when creating a cursor %1 Error occurred when closing a cursor %1 Failed to create Event object %1 The value specified for "QueueTimeout" in the registry exceeds the maximum allowed value of %1 seconds. The timeout value in use has been reduced to this maximum The queue %1 is already open. It is likely that another process is running and will be processing the Nack messages placed on this queue. This Nack Handler will now terminate, as it is redundant. No additional action is necessary Failed to open queue "%2" %1 Failed to create queue "%2" %1 The MSMQ Nack Message Handler for Archive Service has started The MSMQ Nack Message Handler for the Archive Service has stopped Error loading string resource %1 Error building a security descriptor for queue %1 Error occurred waiting for event object(s) %1 Error occurred getting message property %1 Error occurred when peeking a message %1 Error occurred setting message property %1 Error occurred when creating a cursor %1 An unexpected timeout occurred while attempting to access a queued message. This may have occurred because a message was not on a queue as expected or because the system is heavily loaded, thus causing excessive MSMQ delays. If you suspect the problem is caused by MSMQ delays, try increasing the Enterprise Vault "QueueTimeout" registry value, as described in the "Modifying Registry Settings" section in the Troubleshooting section of the Administrator help. Error occurred when receiving a message %1 MSMQ negative acknowledgment message(s) have been handled. Queue:%1 Reason: Destination queue can not be reached, the queue may have been deleted MSMQ negative acknowledgment message(s) have been handled. Queue:%1 Reason: The message was purged before reaching the destination queue MSMQ negative acknowledgment message(s) have been handled. Queue:%1 Reason: Time to reach queue has expired MSMQ negative acknowledgment message(s) have been handled. Queue:%1 Reason: The message has exceeded the queue quota MSMQ negative acknowledgment message(s) have been handled. Queue:%1 Reason: The sender does not have send access rights on the queue. MSMQ negative acknowledgment message(s) have been handled. Queue:%1 Reason: The message hop count exceeded MSMQ negative acknowledgment message(s) have been handled. Queue:%1 Reason: The message signature is bad. The message could not be authenticated. MSMQ negative acknowledgment message(s) have been handled. Queue:%1 Reason: The message could not be decrypted. MSMQ negative acknowledgment message(s) have been handled. Queue:%1 Reason: The message could not be encrypted for the destination. MSMQ negative acknowledgment message(s) have been handled. Queue:%1 Reason: The message was sent to a non-transactional queue within a transaction.

MSMQ negative acknowledgment message(s) have been handled. Queue:%1 Reason: The message was sent to a transactional queue not within a transaction. MSMQ negative acknowledgment message(s) have been handled. Queue:%1 Reason: The queue was deleted, after the message has arrived MSMQ negative acknowledgment message(s) have been handled. Queue:%1 Reason: The message was purged at the destination queue <br>e.g.<br> MSMQ negative acknowledgment message(s) have been handled. Queue:.\private$\Enterprise Vault Archiving Service for EXCHANGE Admin Queue Reason: The message was purged at the destination queue MSMQ negative acknowledgment message(s) have been handled. Queue:%1 Reason: Time to receive has expired, while the message is in the queue A MSMQ negative acknowledgment message has been queued for an unknown message type, the message will be discarded A MSMQ negative acknowledgment message has been processed for a message of type 'PROCESS SYSTEM'. The Exchange system: %1 will not be automatically archived until the next archive scheduled period A MSMQ negative acknowledgment message has been processed for a message of type 'PROCESS MAILBOX'. The Exchange User Mailbox: %1 on the Exchange system: %2 will not be automatically archived until the next archive scheduled period A MSMQ negative acknowledgment was found to have no corresponding XACT Dead Letter Queue message, the message has been discarded Failed to start the Archive Service NAK handler failed list management thread The current action has failed due to an invalid Domain\Username string. The journal mailbox, %1, has exceeded its storage quota limits. The journaling service will shut down. Please remove all storage quota limits from this mailbox. %1:CArchivingAgent::GetUserQuotaValues() Entering routine %1:CArchivingAgent::GetUserQuotaValues() Exiting routine %1:CArchivingAgent::GetUserQuotaValues() Successfully opened the mailbox directory object. %1:CArchivingAgent::GetUserQuotaValues() Successfully opened the message store directory object. A storage limit has been found on mailbox %1 Quota Type: %2 Quota Limit (K): %3 Quota Used (K): %4 (Note: This is the information store default for all mailboxes) A storage limit has been found on mailbox %1 Quota Type: %2 Quota Limit (K): %3 Quota Used (K): %4 (Note: The information store default has been overridden at the mailbox level) No storage limit has been found on mailbox %1 (Note: This is the information store default for all mailboxes) No storage limit has been found on mailbox %1 (Note: The information store default has been overridden at the mailbox level) Error whilst processing the mailbox %1 Unable to retrieve the Domain\Username string from the mailbox. Possible reasons include: 1. There is no Associated Account with the specified mailbox. 2. The users Domain controller is unavailable. Error returned : %2 %1:CArchivingAgent::IsEligibleForArchive(%3) The message titled: %2 will not be journaled as it has the Do Not Journal property set The following message could not be archived by the Archive/Public Folder Service as it may be corrupt. Title: %1 Mailbox: %2 No further attempts will be made to archive this message. To override this, clear the "Do not archive this item" property on the message in the mailbox. An error occurred while creating the MSMQ NACK handler object Error creating Retrieval Service Nack Handler thread The MSMQ Nack Message Handler for Retrieval Service has started The MSMQ Nack Message Handler for the Retrieval Service has stopped Error creating event object for Retrieval Service Nack Handler Failed to start the Retrieval Service NACK handler failed list management thread Error occurred when creating a cursor %1 Error occurred when closing a cursor %1 MSMQ negative acknowledgment message has been processed for a message of type 'RESTORE ITEM'. The TransactionID of the retrieval request was: %1 The savesetID was: %2 MSMQ negative acknowledgment message has been processed for a message of type 'SAVESET AVAILABLE'. The TransactionID of the retrieval request was: %1 The savesetID was: %2 MSMQ negative acknowledgment message has been processed for a message of type 'RESTORE OPERATION FAILED'. The TransactionID of the retrieval request was: %1 The savesetID was: %2 A MSMQ negative acknowledgment message has been queued for an unknown message type, the message will be discarded %1:CAgentSchedule::ProcessSchedule() Journal Service did not queue a Process Mailbox Message because the Process Mailbox mutex was locked. %1:CArchivingAgent::ProcessUser() Journal Service ignored a Process Mailbox Message because the Process Mailbox mutex was locked %1:CArchivingAgent::ProcessUser() Ignored system mailbox %2 Whilst post processing a message an error occurred in CArchivingAgent::PostProcessArchivedItem() whilst calling CExchangeShortcutAccessor::BuildFromSessionAndLocation(). <p> Error returned from BuildFromSessionAndLocation(): 80004005 Error returned from BuildFromSessionAndLocation(): %1 An unrecoverable error occurred. There is not enough free disk space to continue. An unrecoverable error occurred. There is not enough free memory available to continue. An unrecoverable error occurred. There are not enough resources available to continue. An unrecoverable error occurred. There is a problem with one of the disks. An invalid parameter has been passed to the function Failed to find configuration information for the %1 Agent in the Directory Service on computer %2 This could be because the service was deleted before completing all its outstanding work. Service entry id: %3 %1:InitializeAgentServiceEntry() The agent's CanDelete flag has been set to %2 %1:KillAgentClientBroker() Running Lock not initialized Can't check the AgentClientBroker process as other processes may be running %1:KillAgentClientBroker() Other processes are still running Not checking the AgentClientBroker process %1:KillAgentClientBroker() Last process to exit Orphaned AgentClientBroker process found and killed

%1:KillAgentClientBroker() Last process to exit AgentClientBroker process not found %1:InitialiseAgentServiceEntry() Getting the running lock Failed to get the agents running lock %1:InitialiseAgentServiceEntry() Failed to list the system processes Can't check for the AgentClientBroker While processing mailbox %1 the Storage Service reached its lower MSMQ threshold. The Archiving/Journaling Service will pause to let it recover. The dispenser will pause without reposting the current message NULLNULLNULLWhilst archiving/restoring an item the call to establish if the user is the mailbox owner or an administrator failed. The message will be posted to the end of the queue and the retry count updated. %1:CArchivingAgent::ProcessUser() Archive/Journal Service ignored a Process Mailbox Message because the Process Mailbox mutex was locked and the mailbox is being processed by another thread While processing mailbox %1 the Storage Service reached its upper MSMQ threshold. The Archiving/Journaling Service will pause for %2 minutes to let it recover. The Storage Service is still at its upper MSMQ threshold. The Archiving/Journaling Service will pause for %1 minutes to let it recover. Mailbox %2 will be processed again when the service resumes processing. <br>e.g.<br> The Storage Service is still at its upper MSMQ threshold. The Archiving/Journaling Service will pause for 15 minutes to let it recover. Mailbox /O=ACME /OU=REO/CN=RECIPIENTS/CN=DOWDP will be processed again when the service resumes processing. The dispenser will do a long pause without reposting the current message The dispenser will do a long pause and abort the current mailbox transaction An exception has occurred in routine %1 caused by Collaboration Data Objects (CDO). This could be the result of undetected problems occurring when CDO.DLL was installed. The Exchange server %1 cannot be processed as all archive requests for this system have been disabled for this Exchange system Failed to delete a saveset whilst restoring, the error returned was %1 NULLNULLNULLNULL%1:CArchivingAgent::PF_SetFilterAndRentention() Entering routine %1:CArchivingAgent::PF_SetFilterAndRentention() Exiting routine %1:CArchivingAgent::PF_FolderPermissionCheck() Entering routine %1:CArchivingAgent::PF_FolderPermissionCheck() Exiting routine %1:CArchivingAgent::PF_GetFolderTable() Entering routine %1:CArchivingAgent::PF_GetFolderTable() Exiting routine %1:CArchivingAgent::PF_ProcessSubFolders() Entering routine %1:CArchivingAgent::PF_ProcessSubFolders() Exiting routine %1:CArchivingAgent::ArchiveFolder() Getting a MAPI session from the session pool %1:CArchivingAgent::ArchiveFolder() Return the MAPI session to the session pool %1:CArchivingAgent::ArchiveFolder() Entering routine. %1:CArchivingAgent::ArchiveFolder() Exiting routine. %1:CArchivingAgent::ArchiveFolder() Getting message store entry id for the mailbox. %1:CArchivingAgent::ArchiveFolder() Opening the message store. %1:CArchivingAgent::ArchiveFolder() Getting the Folder ID which is to be archived. %1:CArchivingAgent::ArchiveFolder() Check the archive requestor is either the mailbox owner or an administrator %1:CArchivingAgent::ArchiveFolder() Open the folder entry. %1:CArchivingAgent::ArchiveFolder() As this is archive folder a special filter is used, some of this is set up from user choices from the desktop. %1:CArchivingAgent::ArchiveFolder() Get the required properties for the folder. %1:CArchivingAgent::ArchiveFolder() Get the domain\username string for the mailbox as it is required by processFolders. %1:CArchivingAgent::ArchiveFolder() Opening the message queue for writing. This handle is used later when posting processItem messages. %1:CArchivingAgent::ArchiveFolder() Calling processFolders to take care of archiving all messages. %1:CArchivingAgent::PopulateTableRowItem() Entering routine. %1:CArchivingAgent::PopulateTableRowItem() Exiting routine. %1:CArchivingAgent::SetupAndCallQueueMsg() Entering routine. %1:CArchivingAgent::SetupAndCallQueueMsg() Exiting routine.

An error occurred whilst archiving a folder for the mailbox %1. An error in CArchivingAgent::SetupAndCallQueueMsg() occurred whilst creating the objects that are needed. A MAPI or Message Queue error occurred within SetupAndCallQueueMsg. The error will be passed back to the caller. The error code was : %1 The Storage Service reached its lower MSMQ threshold. The Archiving/Journaling Service will pause to let it recover. The dispenser will pause aborting the current item. %1:CArchivingAgent::ArchiveFolder() The mailbox %2 is locked by another operation, this Archive Folder request will be reposted to the end of the queue. The mailbox is locked by another operation, this Archive Folder request will be reposted to the end of the queue. %1:CArchivingAgentQueue::ArchiveFolderNoCallBack() Entering routine %1:CArchivingAgentQueue::ArchiveFolderNoCallBack() The label for this message queue entry will be = %2 %1:CArchivingAgentQueue::ArchiveFolderNoCallBack() Writing %2 to ArchiveFolder buffer %1:CArchivingAgentQueue::ArchiveFolderNoCallBack() Sending the Message Queue message MsgID_ArchiveItem with the constructed buffer %1:CArchivingAgentQueue::ArchiveFolderNoCallBack() Exiting routine %1:CArchivingAgent::PostProcessArchivedItem() Getting ShortcutAccessor2 interface %1:CArchivingAgentQueue::ProcessPublicFolders() Entering routine %1:CArchivingAgentQueue::ProcessPublicFolders() The label for this message queue entry will be = %2 %1:CArchivingAgentQueue::ProcessPublicFolders() Checking callers Vault access privileges. User must be an administrator to perform this operation %1:CArchivingAgentQueue::ProcessPublicFolders() Writing %2 to ProcessPublicFolders buffer %1:CArchivingAgentQueue::ProcessPublicFolders() Sending the Message Queue message %2 with the constructed buffer %1:CArchivingAgentQueue::ProcessPublicFolders() Exiting routine Archiving is currently disabled for Public Folders. %1:CArchivingAgent::MainProcessPublicFolders() Entering routine Checking Mode = %2 %1:CArchivingAgent::MainProcessPublicFolders() Getting MAPI session from pool %1:CArchivingAgent::MainProcessPublicFolders() Returning MAPI session from pool %1:CArchivingAgent::MainProcessPublicFolders() Exiting routine Error processing archive request for Public Folders in tree %1 An error occurred whilst queuing subfolders of the public folder %1. Error: %2 Failed to queue a ProcessAPublicFolder message for %1. Unable to determine Home Exchange Server for Public Folder %1. This folder will not be processed. %1:CArchivingAgent::FindAndQueuePublicFolders() Entering routine %1:CArchivingAgent::FindAndQueuePublicFolders() Exiting routine %1:CArchivingAgent::QueueAProcessAPublicFolderMessage() Entering routine %1:CArchivingAgent::QueueAProcessAPublicFolderMessage() Queuing MsgID_ProcessAPublicFolder for %2 %1:CArchivingAgent::QueueAProcessAPublicFolderMessage() Exiting routine %1:CArchivingAgent::ProcessAPublicFolder Entering routine Checking Mode = %2 %1:CArchivingAgent::ProcessAPublicFolder Exiting routine %1:CArchivingAgent::ProcessPublicFolders Opening the Public Information Store %1:CArchivingAgent::ProcessPublicFolders Opening the RootPublicFolderPath (%2) of the Public Information store Failed to start the Public Folder Agent for %1, the MSMQ queues could not be opened. The Public Folder service for %1 has started (%2) <br>e.g.<br> The Public Folder service for \ACME REO\ENG\Docs has started (5, 0, 0, 5562) The Public Folder service for %1 has stopped The Public Folder service for %1 could not be started due to startup errors <br>e.g.<br> The Public Folder service for \ACME\IT could not be started due to startup errors %1:CAgentSchedule::QueueAProcessPublicFoldersMessage() Exiting routine at point A %1:CAgentSchedule::QueueAProcessPublicFoldersMessage() Exiting routine at point B Failed post the process public folders message for the tree %1 %1:GetSiteData() The site default public folder schedule is %2 %1:initializeAgentServiceEntry() The lock archive flag is set to %2 Failed to read filter data required to process public folder \Acme Engineering\Support\Customer Communications\Down Brothers. <p> Make sure that all properties have been set in the Public Folders Enterprise Vault properties.An error has occurred whilst processing the Public Folder %1. Check the Event Log for any previous errors, as they may help determine the cause. Error: %2 <br>e.g.<br> An error has occurred whilst processing the Public Folder \ACME\Engineering\Users\Elwood P Dowd\. Check the Event Log for any previous errors, as they may help determine the cause. Error: 0x800B0001

Public Folder Report Date: %1 System Name: %2 Public Folder start point: %3 Number of archivable items (from start point): %4 Total size of archivable items (from start point): %5 KB Number of folders processed: %6 Number of items ready to archive: %7 Total size of items ready to archive: %8 KB Number of items that would be archived: %9 Total size of items that would be archived: %10 KB Number of expired shortcuts that would be deleted: %13 Start Time: %11 End Time: %12 %1:CArchivingAgent::ProcessAPublicFolder() The Public Folder (%1) is currently locked and being processed by another thread. %1:CArchivingAgent::ProcessAPublicFolder() Getting a MAPI session from the session pool %1:CArchivingAgent::ProcessAPublicFolder() Creating the Entry ID of Public Message Store to be opened %1:CArchivingAgent::ProcessAPublicFolder() Opening the Public Message Store %1:CArchivingAgent::ProcessAPublicFolder() Opening Public Folder %2. %1:CArchivingAgent::ProcessAPublicFolder() Return the MAPI session to the session pool %1:CArchivingAgent::ProcessAPublicFolder() The Public Folder filter value is %2 %1:CArchivingAgent::ProcessAPublicFolder() Making all selected messages Archive Pending, and queuing a Process Item message to MSMQ for each message %1:initializeAgentServiceEntry() The shortcut inactivity period is %2 %1:initializeAgentServiceEntry() The shortcut inactivity period units are %2 %1:initializeAgentServiceEntry() The restored item inactivity period is %2 %1:initializeAgentServiceEntry() The restored item inactivity period units are %2 %1:CArchivingAgent::ExpireShortcuts() Entering routine %1:CArchivingAgent::ExpireShortcuts() Exiting routine %1:CArchivingAgent::ProcessChunkOfShortcuts() Entering routine %1:ProcessChunkOfShortcuts() Exiting routine An error occurred while deleting expired shortcuts for the user /O=ACME/OU=ZKO/CN=RECIPIENTS/CN=MAILBOXES/CN=DOWDP A MSMQ negative acknowledgment message has been processed for a message of type 'ARCHIVE PUBLIC FOLDERS'. The public folders in the tree: %1 will not be automatically archived until the next public folder service scheduled period A MSMQ negative acknowledgment message has been processed for a message of type 'PROCESS A PUBLIC FOLDER'. The public folder with path: %1 will not be automatically archived until the next public folder service scheduled period %1:initializeAgentServiceEntry() The Allow SubFolder Inheritance flag is set to %2 %1:initializeAgentServiceEntry() The Lock Allow SubFolder Inheritance flag is set to %2 There is no valid license key installed. The %1 Service will not run until you install a license key. See the Administrator Help for information on license keys. Your Pilot license has expired. The %1 Service will not run until you install a new license key. See the Administrator Help for information on license keys. An error occurred calculating the 'calculated modified date' of an Exchange item The service has entered backup mode The service has exited backup mode The service failed to start as a null expiry schedule was specified %1:initializeAgentServiceEntry() Read the site expiry schedule as %2 %1:initializeAgentServiceEntry() Read the site expiry basis as %2 %1:initializeAgentServiceEntry() Number of messages per pass %2 Error processing Check System request for %1 <br>e.g.<br> Error processing Check System request for ACMEEXCH1 Error checking mailbox %1 <br>e.g.<br> Error checking mailbox /o=ACME/ou=UK/cn=Recipients/cn=Elwood.Dowd %1:CArchivingAgent::MainProcessSystem() Entering routine %1:CArchivingAgent::MainProcessSystem() Exiting routine %1:CArchivingAgent::CheckSystem() Entering routine %1:CArchivingAgent::CheckSystem() Exiting routine %1:CArchivingAgent::CheckMailbox() Entering routine %1:CArchivingAgent::CheckMailbox() Exiting routine %1:CArchivingAgent::CheckMailbox() Getting a MAPI session from the session pool %1:CArchivingAgent::CheckMailbox() Return the MAPI session to the session pool %1:CArchivingAgentQueue::CheckSystem() Entering routine %1:CArchivingAgentQueue::CheckSystem() Exiting routine %1:CArchivingAgentQueue::CheckPublicFolders() Entering routine %1:CArchivingAgentQueue::CheckPublicFolders() Exiting routine Error processing Check request for Public Folders in tree %1 %1:CArchivingAgent::ProcessChunkOfShortcuts() The shortcut titled: %2 will not be deleted %1:CArchivingAgent::ProcessChunkOfShortcuts() The shortcut titled: %2 will be deleted due to its retention category expiring

%1:CArchivingAgent::ProcessChunkOfShortcuts() The shortcut titled: %2 will be deleted due to its inactivity period expiring Failed to check a shortcut titled: %1 for expiry, due to missing MAPI attribute: %2 Could not build a saveset for the message titled %1 in Mailbox %2, function %3 failed Error returned = %4 <br>e.g.<br> Could not build a saveset for the message titled in Mailbox /o=ACME/ou=REO/cn=ZKO/cn=Dowdp, function ISaveset::Store() failed <br> Error returned = 0xC0041AA6 The service failed to start as a null computer entry id was specified %1:GetServiceData() The computer entry id is %2 The service failed to start as a null computer root path was specified %1:GetComputerData() The computer root path is %2 Failed to rollover the CMailboxStatistics logfile %1 Failed to initialize the class %1 %1:ProcessUser() The mailbox %2 will not be processed by the Archive agent as it is the journal service mailbox %1:CAgentSchedule::QueueACheckSystemMessage() Entered routine. %1:CAgentSchedule::QueueACheckPublicFoldersMessage() Entered routine. %1:CArchivingAgent::QueueACheckSystemMessage() Exiting routine at point A %1:CArchivingAgent::QueueACheckSystemMessage() Exiting routine at point B %1:CArchivingAgent::QueueACheckPublicFoldersMessage() Exiting routine at point A %1:CArchivingAgent::QueueACheckPublicFoldersMessage() Exiting routine at point B Failed post the check system message for the ExchangeSystem %1 Failed post the check folders message for the tree %1 The service failed to start as a null shortcut deletion time was specified %1:CArchivingAgent::CheckSystem() There is no work to do as Expiry of shortcuts ands deletion of shortcuts by age are switched off %1:CArchivingAgent::CheckPublicFolders() There is no work to do as Expiry of shortcuts ands deletion of shortcuts by age are switched off %1:initializeAgentServiceEntry() The site setting for maximum messages per user per schedule is being overridden with a value of %2 Error reading the legacy message store and mailbox distinguished names from active directory for mailbox %1 The service will now shut down Error reading the legacy message store and mailbox distinguished names from active directory for mailbox %1 The format of the JournalServiceEntry JournalingMailboxDn attribute is incorrect, it should be the active directory distinguished name of the journal mailbox not the Exchange 5.5 legacy mailbox distinguished name. The service will now shut down %1:CArchivingAgent::PostProcessArchivedItem() Unable to open the mailbox for the current item. The mailbox appears to have been deleted. The current item will be discarded. %1:AgentMessageDispenser::ProcessMessages() Unable to allocate enough memory for the wait handle array, the service will shut down due to an unrecoverable error. A MSMQ negative acknowledgment message has been processed for a message of type 'CHECK SYSTEM'. The Exchange system: %1 will not be automatically checked until the next scheduled period A MSMQ negative acknowledgment message has been processed for a message of type 'PROCESS MAILBOX 2K'. The Exchange User Mailbox: %1 on the Exchange system: %2 will not be automatically archived until the next archive scheduled period A MSMQ negative acknowledgment message has been processed for a message of type 'CHECK MAILBOX'. The Exchange User Mailbox: %1 on the Exchange system: %2 will not be automatically checked until the next scheduled period A MSMQ negative acknowledgment message has been processed for a message of type 'CHECK PUBLIC FOLDERS'. The Public Folders in tree: %1 will not be automatically checked until the next scheduled period The IRestorationAgent->RestoreItem() function failed whilst processing the item with TransactionID: %1, SavesetID: %2 Number of retries: %3 The retrieval request has failed because the associated Saveset could not be found on the spool queue. The retrieval request will now be discarded It is possible that the Saveset has been removed from the spool queue because it has not been received in time. <br>e.g.<br> The IRestorationAgent->RestoreItem() function failed whilst processing the item with TransactionID: 5123104F6ADC42AAB41C617FFE1A3FE, SavesetID: 101310000000000~200304180803140000~0~5303A7CBB67642ACAB2B555CEB49ED7 <br>Number of retries: 30 <br> The retrieval request has failed because the associated Saveset could not be found on the spool queue. The retrieval request will now be discarded <br> It is possible that the Saveset has been removed from the spool queue because it has not been received in time. AGENTS_E_EXCSVRVERSIONERRSESSIONERR AGENTS_E_EXCSVRVERSIONNOCDOEXM Unable to determine the version of the Exchange server %1, the service will shut down <br>For example:<br>Unable to determine the version of the Exchange server ACMEEXCH1, the service will shut down Could not get a MAPI session from the session pool whilst retrieving an item to a mailbox.<br> The following error was returned: c0040c62. CMailboxHelper::CreateSession() has failed to create a pointer to a MAPI Session. The service will now shut down due an unrecoverable error. CMailboxHelper::CreateSession() has been passed invalid parameters. The MAPI Session cannot be created successfully. The service will now shut down due to an unrecoverable error. A retrieval request has failed and it has not been possible to remove the item from the 'Enterprise Vault Spool Queue'. This item will remain on the queue. Please contact your support representative for further information. An error occurred while queuing a Process Mailbox message for the mailbox %1, in function CArchivingAgent::QueueAnotherProcessMailboxMsg() %1:GetServiceData() Read the root public folder path as %2 The service failed to start as a null root public folder path was specified Could not get a MAPI session when validating the public folder root path %1 The following error was returned: %2. Please check that the Exchange Server %3 is running and that the Vault Site account has the correct privileges. <br>e.g.<br> Could not get a MAPI session when validating the public folder root path \ACME\IT The following error was returned: 80040111. Please check that the Exchange Server ACMEEXCH1 is running and that the Vault Site account has the correct privileges. Folder %1 is unavailable. The folder may have been renamed or deleted, or the Exchange public information store may be unavailable. Could not validate the public folder root path due to the following error %1 The mailbox %1, has exceeded its "Prohibit Send & Receive" limit and cannot be processed. Maximum allowed: %2 KB Current level : %3 KB If you wish Enterprise Vault to archive items from this mailbox then this quota must be removed. <p>e.g.<br> The mailbox /O=ACME/OU=REO/CN=RECIPIENTS/CN=DOWDP, has exceeded its "Prohibit Send & Receive" limit and cannot be processed.<br> Maximum allowed: 4000 KB<br> Current level : 7000 KB<br> If you wish Enterprise Vault to archive items from this mailbox then this quota must be removed. The dispenser was asked to repost the message to be retried later because the saveset file could not be found %1:CRestorationAgent::SavesetAvailable() Saveset not found on spool queue Retry Count: %2. %1:CRestorationAgent::SavesetAvailable() Saveset finally found on spool queue after retries. Retry Count: %2.

The Vault selected on the current folder no longer exists in the Vault Directory. This folder will be set to 'Do Not Archive' and all messages in this folder will be ignored until the folder settings are changed. <p> Details: <br> VaultId: <br>1BD1B1AF49AD8D311ACEE00508B070AE51110000huyton.zko.acme.com <br> Mailbox: /o=ACME/ou=ACMEENGINEERING/cn=ZKO/cn=dowdp <br> Folder: Deleted ItemsThe Vault selected on the current folder has a status that means the Vault cannot be used for Archiving. This folder will be set to 'Do Not Archive' and all messages in this folder will be ignored until the folder settings are changed. Details: Vault Name: %1 VaultId: %2 Status: %3 Mailbox: %4 Folder: %5 PF_CheckVaultAvailability has been unable to determine the current Vaults status. Details: VaultId: %2 Mailbox: %3 Folder: %4 Reason: %1 <br>e.g.<br> PF_CheckVaultAvailability has been unable to determine the current Vaults status. Details: VaultId: 1D5A96DEEBB68D61183B000508B319C691110000vault.acme.com Mailbox: /o=ACME/ou=ENGINEERING/cn=Recipients/cn=Journal Folder: Top of Information Store Reason: Not enough storage is available to complete this operation. [0x8007000e]An error occurred whilst setting a folders properties to 'Do Not Archive'. See previous warnings for reason. Details: Mailbox: %1 Folder: %2 Error returned : %3 %1:CArchivingAgent::WriteWorkItemsToQueue() Entering Routine. %1:CArchivingAgent::WriteWorkItemsToQueue() Exiting Routine. %1:CArchivingAgent::WriteWorkItemsToQueue() The Vault specified for the current message cannot be found in the Vault Directory. Details: Mailbox: %1 VaultId: %2 Message: %3 %1:CArchivingAgent::WriteWorkItemsToQueue() The Vault specified for the current message has returned the status : %2. Details: VaultId: %3 Mailbox: %4 Message: %5 %1:CArchivingAgent::WriteWorkItemsToQueue() Calling GetVaultStatus(). %1:CArchivingAgent::WriteWorkItemsToQueue() Calling MakeItemPendingAndQueueMsg() Mailbox: %2 Message: %3 %1:CArchivingAgent::WriteWorkItemsToQueue() Call to MakeItemPendingAndQueueMsg() failed Mailbox: %2 Message: %3 Error Returned: %4 %1:CArchivingAgent::PF_CheckVaultAvailability() Entering routine. %1:CArchivingAgent::PF_CheckVaultAvailability() Exiting routine. %1:GetServiceData() Set the friendly name of the public folder service to :%2 The Directory Service is not running. Please try again later. The Retrieval Service is not running. Please try again later. The public folder with path name: %1 is marked as a public folder root path. The site id of the public folder service processing this folder is %2 The following message could not be archived by the Journaling Service as it may be corrupt. Title: %1 Mailbox: %2 No further attempts will be made to archive this message. The message has been moved to the 'Enterprise Vault Journaling Service\Failed to copy' folder. <font face="Courier New"><span class="FIXEDFONT">The following message could not be archived by the Journaling Service as it may be corrupt. </span><br /><tt><span class="FIXEDFONT">Title: %1</span></tt></font><br /><tt><span class="FIXEDFONT">Mailbox: %2 </span></tt><br /><br /><tt><span class="FIXEDFONT">An error occurred whilst moving the message to the 'Enterprise Vault Journaling Service\Failed to copy' folder. The message has been marked as "Do Not Archive", and no further attempts will be made to archive this message.</span></tt><br />A MSMQ negative acknowledgment message has been processed for a message of type 'PROCESS FOLDER'. The archive folder request for the mailbox %1 will not be processed CArchivingAgent::processMessages() Processed all existing messages in folder. The remaining working copies will be ignored. Exchange User: %1 Items processed: %2 %1:CArchivingAgent::GetUserQuotaValues() Could not read all the mailbox attributes needed to determine the user's quota values. Quotas may be defaulted to zero. Mailbox: %2 The Storage Service is not running. Please try again later. This service has been configured to work with Microsoft Exchange Server %1 Unable to determine the version of the Exchange server %1, the service will shut down Reason: Access Denied Unable to determine the version of the Exchange server ACMEEXCH1, the service will shut down <p> Reason: Unable to connect to the computer Unable to determine the version of the Exchange server %1, the service will shut down Reason: Exchange Server not installed The version of the Exchange server %1 is not compatible, the service will shut down The public folder service named: %1 could not access the public folder with path: %2. Reason: The contents of this public folder are currently unavailable. Either the Microsoft Exchange Server computer servicing this public folder is down or the public folder service does not have privileges to access this folder %1:initializeAgentServiceEntry() The service description is %2 %1:initializeAgentServiceEntry() The Exchange Server DN is %2 %1:CArchivingAgent::PF_SetFilterAndRetention() The current folder filter for the folder %2, will be overridden as its parent folders filter was set by the mailbox configuration tool %1:CArchivingAgent::IsEligibleForArchive(%3) The message titled %2 will be converted from the pre-V3.5 shortcut message class and is NOT eligible for archive %1:CArchivingAgent::IsEligibleForArchive(%3) The message titled %2 will be converted from the pre-V3.5 pending archive message class and is NOT eligible for archive An error occurred during Service Initialization, the Service has shut down. Error: %1 The public folder with path name: %1 is already marked as a public folder root path by a different Vault Site. The site id of the public folder service processing this folder is %2. %1:CArchivingAgent::IsEligibleForArchive(%3) The message titled %2 will not converted from the pre-V3.5 vault item as all clients have not been upgraded this item is NOT eligible for archive An error occurred whilst processing the message titled: %1 for mailbox: %2, the message will not be archived as it is a V3.5 Enterprise Vault item being archived by a V3.0 Enterprise Vault client. %1:initializeAgentServiceEntry() The quota based archive prioritize large items flag is set to %2 %1:initializeAgentServiceEntry() The quota based archive minimum age threshold period is set to %2 %1:initializeAgentServiceEntry() The quota based archive minimum age threshold units is set to %2 %1:initializeAgentServiceEntry() The quota based archive minimum size of large items is set to %2 %1:initializeAgentServiceEntry() The age based archive prioritize large items flag is set to %2 %1:initializeAgentServiceEntry() The age based archive minimum age of large items threshold period is set to %2 %1:initializeAgentServiceEntry() The age based archive minimum age of large items threshold units is set to %2 %1:initializeAgentServiceEntry() The age based archive minimum size of large items is set to %2 %1:initializeAgentServiceEntry() An additional journal mailbox with distinguished name of %2 will be archived %1:initializeAgentServiceEntry() The journal vaultID of %2 will be used for the additional Journaling Mailbox %3

The user: %1 attempted to archive a message to the vault named: %2. The message could not be archived as the user has exceeded their vault quota limit. The message titled: %1 will not be archived due to the vault with name: %2 exceeding its vault size limit Failed whilst synchronizing permissions between folder: %1 and the Vault: %2 for the user: %3 Failed whilst synchronizing permissions between Public folder: %1 and the Vault: %2 Error: %3 Failed whilst synchronizing owner permissions of mailbox: %1 and the Vault: %2 Failed whilst synchronizing the mailbox name: %2 to the Vault: %3. Error: %1 Reference: %4 %1:CArchivingAgent::PublicFolderSynchronise() Synchronizing permissions from folder: %2 to vault: %3 %1:CArchivingAgent::DoMailboxAndVaultSynchronisation() Synchronizing permissions for user: %2, from: %3 to vault: %4 %1:CArchivingAgent::DoMailboxAndVaultSynchronisation() Synchronizing the vault name from the mailbox name, user: %2, vault: %3 %1:CArchivingAgent::DoMailboxAndVaultSynchronisation() Synchronizing mailbox owner to have control access to vault, user: %2, vault: %3. The Public Folder Service failed to start as a null default Vault Store for the service was specified. The Public Folder Service failed to start as a null default Retention Category for the service was specified. %1: GetServiceData() the default vault store for the public folder service is %2 %1: GetServiceData() the default retention category for the public folder service is %2 An error has occurred whilst creating a Vault for the public folder %1 being processed by the %2 Public Folder Service. Error: %3 The service failed to start because an error occurred whilst getting the Security Information needed. Error: %1 Description: %2 The service failed to start as a null domain name was specified in the site entry. %1: GetSiteData() the service account domain is %2 and the sid is %3 An error occurred whilst enabling the public folder %1 for archiving. The error occurred whilst applying the filter and retention category to the public folder. Error: %2 The following folders have exactly the same Vault properties: (a) %1 (b) %2 Possible causes (and their outcome) of this problem: 1) Public folder (a) is a copy of (b). A new Vault will be created for the public folder (a) 2) Public folder (a) has been renamed and a new folder (b) created with the original pathname. The original Vault for folder (a) will no longer have its permissions automatically synchronized and items in this folder may not be available to all its subscribers. A new Vault will be created for both public folders (a) and (b). An error occurred whilst synchronizing properties of Public Folder %1 to the vault %2. Error: %3 %1:CArchivingAgent::PublicFolderSynchronise() Synchronizing properties between folder %2 and vault %3 An error has occurred whilst creating a vault for the public folder %1. Error: %2 %1:CArchivingAgent::CheckUserVaultAccess() User %2 has access to the vault as it is the default vault for the mailbox An error occurred whilst checking the site Id for the mailbox %1. This mailbox will not be processed. Error: %2 <br>e.g.<br> An error occurred whilst checking the site Id for the mailbox /O=ACME/OU=US-ACME/CN=LOADSIM/CN=EXUSNY1-OUTL1912. This mailbox will not be processed. Error: 0x2F1E344%1:CArchivingAgent::ProcessUser(cont) Mailbox %2 Messages processed: %3 Messages still to process: %4 Queued another ProcessMailbox request %1:CArchivingAgent::ProcessUser(cont) Mailbox %2 No more messages for processing. %1:CArchivingAgent::ProcessUser(cont) Mailbox %2 Messages processed: %3 Messages still eligible: %4 Not running in continuous mode An error occurred whilst enabling the public folder %2 for archiving. The error occurred whilst applying the vault identifier to the public folder. Error: %1 An error occurred whilst enabling the public folder %1 for archiving. The error occurred whilst creating the vault for the public folder. Error: %2 A non-specific error has occurred whilst enabling the public folder %1. Error: %2 An error occurred whilst checking mailbox %1 to see if it is hidden in the address book or has previously been deleted. A Process Mailbox Message will not be queued for this mailbox. Error: %2 An error occurred whilst reading the Vault Store Entry %1. Could not start the Public Folder Service. You must create an index for the service's default Vault Store. See the description of upgrading Enterprise Vault servers in the ReadMe section of the Administrator help. Failed to process a message because the language of the message does not match the language of the system. Could not determine the default system codepage. To process all messages, regardless of their native language, set the following DWORD registry key to the value "2" and restart the service: HKLM\Software\KVS\Enterprise Vault\Agents\CodepageProcessing An error occurred whilst creating a vault for /o=exchange/ou=First Administrative Group/cn=Recipients/cn=User.One during an Enable Mailbox. Error: 'Will vary depending on failure' An error occurred whilst enabling archiving for the mailbox %2 Error: %1 <br>e.g. An error occurred whilst enabling archiving for the mailbox /o=First Organization/ou=First Administrative Group/cn=Recipients/cn=test2 <br> Error: Unspecified error [0x80004005]An non-specific error has occurred whilst enabling archiving for the mailbox %2 Error: %1 An error occurred whilst disabling archiving for the mailbox %2 Error: %1 Deleting the Vault due to an earlier error has failed Mailbox: %2 VaultId: %3 Error: %1 Exchange Store Reporter failed.\nReason: %1 The report file could not be created Failed whilst initializing the Filter Controller. The agent will now shut down as it cannot reliably continue. Error: %1 <br>For example:<br> Failed whilst initializing the Filter Controller. The agent will now shut down as it cannot reliably continue. <br> Error: Catastrophic failure [0x8000ffff]An error occurred processing the external filter '%2'. No more filters will be processed and no action will be taken against the current message. Error: %1 Failed to initialize the external filter with ProgId '%1'. Either the ProgId is incorrect or the DLL has not been registered. Please check the ProgId or register the DLL for the external filter. An error has occurred initializing the external filter '%2'. Error: %1 <br>e.g.<br> An error has occurred initializing the external filter 'KVS.Accelerator.PlugIn.Filter'. <br> Error: Catastrophic failure [0x8000ffff] <br> An exception in the Filter Controller has occurred in routine: %1 <BR>e.g.<br> An exception in the Filter Controller has occurred in routine: CEVFilterController/gCMEx/e1

The service cannot start because the Filter Controller (EVFilterController.dll) doesn't appear to be registered on this system. Please register the DLL and restart the service Error: %1 Whilst processing external filters too many consecutive errors have occurred. This service will now shut down. An error has occurred in the Distribution List caching object. [Internal reference %1] <br>e.g.<br> An error has occurred in the Distribution List caching object.<br> [Internal reference CDLCache::/CC<br>(/O=ACME/OU=ZKO/CN=SYSTEM DISTRIBUTION LISTS/CN=SALES )/e2/6] <br> The Selective Journal filter could not successfully add a processing instruction due to an error. This instruction will be ignored. File: %2 Line: %3 Inst: %4%5 Error: %1 An exception has occurred in the Selective Journal Filter. [Internal reference %1] The following recipient is invalid: %2. [Internal reference %1] Archivable items will be restricted to items dated %1 onwards. Start to process the Exchange system %1. <br>e.g.<br> Start to process the Exchange system ACMEEX1. Start to process the Exchange system %1 (in report mode). <br>e.g.<br> Start to process the Exchange system ACMEEXCH1 (in report mode). Start to check the shortcuts on the Exchange system %1. Start to check the shortcuts on Exchange system %1 (in report mode). Summary for shortcut deletion. Mailbox: '%1': Total number of shortcuts found: %2 Number of orphaned shortcuts deleted: %3 Number of old shortcuts deleted: %4 Total number of shortcuts remaining: %5 Summary for shortcut deletion. Public folder '%1' and its sub-folders: Total number of shortcuts found: %2 Number of orphaned shortcuts deleted: %3 Number of old shortcuts deleted: %4 Total number of shortcuts remaining: %5 Could not process a message. Mailbox: %2 Folder: %3 Subject: %4 Error: %1 Reference: %5 An error occurred initializing the COM objects required. %1 <br>e.g.<br> An error occurred initialising the COM objects required. <br> The server is not operational. [0x8007203a]A request has been made on an agent that does not support the requested action. The ArchiveFolder request on folder %3 in mailbox %2 has failed. Error: %1 A MSMQ negative acknowledgment message has been processed for a message of type 'ARCHIVEFOLDERACTION'. The archive folder request for the mailbox %1, on folder %2 will not be processed A MSMQ negative acknowledgment message has been processed for a message of type 'ARCHIVEMARKEDITEMS'. The request to archive items in folder %2 of mailbox %1 will not be processed A MSMQ negative acknowledgment message has been processed for a message of type 'DELETEMARKEDITEMS'. The request to delete items in folder %2 of mailbox %1 will not be processed A MSMQ negative acknowledgment message has been processed for a message of type 'RETRIEVEMARKEDITEMS'. The request to retrieve items in folder %2 of mailbox %1 will not be processed Failed to process a message because it was created with a non-ANSI CodePage. Failed to process a message because it does not have a CodePage specified. An ArchiveMarkedItems request has failed. Mailbox: %2 Folder: %3 Error: %1 A DeleteMarkedItems request has failed. Mailbox: %2 Folder: %3 Error: %1 An ArchiveMarkedItems request has failed. Not all of the messages could be returned to their original state. These messages will remain as pending archive in the users mailbox. Mailbox: %2 Folder: %3 Error: %1 A DeleteMarkedItems request has failed. Not all of the messages could be returned to a shortcut. These messages will remain as delete pending in the users mailbox. Mailbox: %2 Folder: %3 Error: %1 A RetrieveMarkedItems request has failed. Mailbox: %2 Folder: %3 Error: %1 <br>e.g.<br> A RetrieveMarkedItems request has failed. Not all of the messages could be returned to a shortcut. These messages will remain as pending retrieval in the users mailbox. Mailbox: /o=Dowd Elwood <br> Folder: Inbox <br> Error: <0x8004011c> <br> The item is not pending retrieval. A MSMQ negative acknowledgment message has been processed for a message of type 'PROCESS MAILBOX EX'. The Exchange User Mailbox: %1 on the Exchange system: %2 will not be automatically archived until the next archive scheduled period <br>e.g.<br> A MSMQ negative acknowledgment message has been processed for a message of type 'PROCESS MAILBOX EX'. The Exchange User Mailbox: /O=ACME/OU=ZKO/CN=RECIPIENTS/CN=ELWOODP on the Exchange system: /o=Acme/ou=ZKO/cn=Configuration/cn=Servers/cn=EXCHANGE/cn=Microsoft Private MDB will not be automatically archived until the next archive scheduled periodA MSMQ negative acknowledgment message has been processed for a message of type 'PROCESS SYSTEM EX'. The Exchange system: %1 will not be automatically archived until the next archive scheduled period A MSMQ negative acknowledgment message has been processed for a message of type 'ARCHIVE PUBLIC FOLDERS EX'. The public folders in the tree: %1 will not be automatically archived until the next public folder service scheduled period A MSMQ negative acknowledgment message has been processed for a message of type 'PROCESS A PUBLIC FOLDER EX'. The public folder with path: %1 will not be automatically archived until the next public folder service scheduled period Summary of recipients removed from shortcuts: Mailbox: '%1': Total number of shortcuts: %2 Total number of shortcuts with recipients: %5 Number of shortcuts updated: %3 Number of shortcuts not updated: %4 Summary of recipient added to shortcuts: Mailbox: '%1': Total number of shortcuts: %2 Total number of shortcuts without recipients: %5 Number of shortcuts updated: %3 Number of shortcuts not updated: %4 Summary of message texts added to shortcuts: Mailbox: '%1': Total number of shortcuts: %2 Total number of shortcuts without message text: %5 Number of shortcuts updated: %3 Number of shortcuts not updated: %4 Summary of message texts removed from shortcuts: Mailbox: '%1': Total number of shortcuts: %2 Total number of shortcuts with message text: %5 Number of shortcuts updated: %3 Number of shortcuts not updated: %4 Could not update shortcut. Mailbox: %3 Folder: %4 Shortcut Title: %5 Code: '%1': Reference : %2 An error occurred performing a request to synchronize the mailbox %2. Error: %1 <p>e.g.<br> An error occurred performing a request to synchronize the mailbox /o=ACME/ou=ZKOEUROPEENGINEERING/cn=SUP REO/cn=DOWDP. <p> Error: The MAPI error MAPI_E_FAILONEPROVIDER (0x8004011D) has occurred whilst synchronizing the properties of mailbox . The mailbox will not be synchronized until the next scheduled run. [0xc0040ccd]A MSMQ negative acknowledgment message has been processed for a message of type 'SYNCHRONIZE MAILBOX'. The Exchange User Mailbox: %1 will not be automatically synchronized until the next scheduled time. A MSMQ negative acknowledgment message has been processed for a message of type 'SYNCHRONIZE SYSTEM'. The Exchange system: %1 will not be automatically synchronized until the next scheduled time. Could not update shortcut. Mailbox: %3 Folder: %4 Shortcut Title: %5 Code: '%1': Reference : %2 Shortcut attribute PR_BODY not available. Message attribute PR_BODY not available. Cannot open PST '%2' Error: %1 Internal Reference: %3 An error has occurred listing mailboxes on Exchange Server %2 for synchronization. Error: %1 Internal: %3 <br>e.g.<br> An error has occurred listing mailboxes on Exchange Server ACMEEXCH1 for synchronization. <br> Error: The parameter is incorrect. [0x80070057] <br> Internal: AgentExchSynch.cpp (CAgentExchSynch::ListMailboxesExchange2k) [lines {1105,1109,1144}] built Mar 4 14:22:44 2004 An error has whilst synchronizing the properties of mailbox %2. Error: %1 Internal: %3 <br>e.g.<br> An error has whilst synchronizing the properties of mailbox /o=ACME/ou=Messaging Administrative Group/cn=Recipients/cn=DowdP. <br>Error: The server is not operational. [0x8007203a]

Starting synchronization run of %2 mailboxes on Exchange server %1 <br>e.g.<br> Starting synchronization run of all mailboxes on Exchange server ACMEEXCH1 An error occurred whilst marking mailboxes that appear deleted from Exchange server %2 Error: %1 Internal: %3 Marking mailbox entries not synchronized for %1 days as deleted from Exchange Server %2. A MSMQ negative acknowledgment message has been processed for a message of type 'MARK DELETED MAILBOXES'. Mailbox entries for exchange server %1 will not be processed to determine if they have been deleted until the next schedule. Failed to recover deleted items or folders. Mailbox: %2 Folder: %3 Error: %1 Internal Reference: %4 Archivable items will be restricted to items dated between %1 and %2. Mailbox Owner: '%1', Folder: '%2', Subject: '%3', From: '%4', Creation Date: '%5'. Folder: '%1', Subject: '%2', From: '%3', Creation Date: '%4'. Folder: '%1', Subject: '%2', From: '%3', Creation Date: '%4', Retention Category: '%5'. PST File: '%1', Owner: '%2', Folder: '%3', Subject: '%4', Creation Date: '%5'. For Exchange Server %2, archivable items will be restricted to items dated %1 onwards. For Exchange Server %3, archivable items will be restricted to items dated between %1 and %2. An ArchivePublicFolderItems request has failed. Caller: %2 Public Folder: %3 Error: %1 A DeletePublicFolderItems request has failed. Caller: %2 Public Folder: %3 Error: %1 An ArchivePublicFolderItems request has failed. Not all of the messages could be returned to their original state. These messages will remain as pending archive in the public folder. Caller: %2 Public Folder: %3 Error: %1 A DeletePublicFolderItems request has failed. Not all of the messages could be returned to a shortcut. These messages will remain as delete pending in the public folder. Caller: %2 Public Folder: %3 Error: %1 A RetrievePublicFolderItems request has failed. Caller: %2 Public Folder: %3 Error: %1 A RetrievePublicFolderItems request has failed. Not all of the messages could be returned to a shortcut. These messages will remain as pending retrieval in the public folder. Caller: %2 Public Folder: %3 Error: %1 A MSMQ negative acknowledgment message has been processed for a message of type 'ARCHIVEPUBLICFOLDERITEMS'. The request to archive items in public folder %2 by mailbox %1 will not be processed A MSMQ negative acknowledgment message has been processed for a message of type 'DELETEPUBLICFOLDERITEMS'. The request to delete items in public folder %2 by mailbox %1 will not be processed A MSMQ negative acknowledgment message has been processed for a message of type 'RETRIEVEPUBLICFOLDERITEMS'. The request to retrieve items in public folder %2 by mailbox %1 will not be processed An error occurred looking up a users Active Directory attributes. Mailbox: %2 Exchange Server: %3 Error: %1 An error occurred accessing the mailbox %2 Error: %1 The location and content of the file 'mapisvc.inf' could be a possible cause of this error. Could not detect the MSMQ service. Error: %1 Check that the MSMQ services are running. <br>e.g.<br> Could not detect the MSMQ service. Error: 0xC00E0014 Check that the MSMQ services are running. User {Account name} failed to access an item located in vault {Vault Name} due to insufficient privileges. <p> A frequent cause of this error is a user attempting to open a shortcut that has been forwarded but points to a vault where they do not have the appropriate access.[%1] User %2 is enabled for Offline Vault. Site and mailbox settings will be overridden as follows: Shortcut creation will be forced Shortcut expiry will be prevented Unable to connect to the Exchange Store to enable mailbox %1 The most likely cause is the Vault Service account not having Send As & Receive As permissions on the Exchange Server %2 Unable to connect to the Exchange Store to disable mailbox %1 The most likely cause is the Vault Service account not having Send As & Receive As permissions on the Exchange Server %2 Synchronization aborted due to stop or pause Failed to read Active Directory attribute: %1 for object: %2 Failed to list mailbox permissions whilst synchronizing due to a missing Active Directory attribute. User: %1 Attribute: %2 <br>e.g.<br> Failed to list mailbox permissions whilst synchronizing due to a missing Active Directory attribute. User: CN=Elwood Dowd,OU=Users,OU=ZKO,OU=Sites,OU=US OUs,DC=KVS,DC=local Attribute: msExchMailboxSecurityDescriptor The dispenser will pause aborting the current item. A Journal mailbox has a backlog of messages held in its Inbox. Mailbox: %1 Messages Held: %2 Warning Threshold: %3 Timed out whilst waiting for the MAPI profile mutex Exchange Server: %1 MutexName: %2 Reason: %3 <p>e.g.<br> imed out whilst waiting for the MAPI profile mutex Exchange Server: NYC MutexName: EnterpriseVaultProfileMutex 1A7469D53DE17814FBFC793D5AB682F1E1i10000acme.com Reason: WAIT_TIMEOUT** This is an example of the event. Some details will be different **<p> Could not get a MAPI session from the session pool. <p> Error: <0x80040115> <br> Service: Enterprise Vault Journaling Service for ACMEEXCH1 <br> Additional Information: <br> Whilst processing user /o=ACME/ou=ZKO/cn=Recipients/cn=E2K MAILBOXES/cn=DOWDEP Enterprise Vault has detected a recursive distribution list. No action is necessary but it is suggested the distribution list is checked and fixed. Display name: %1 Distinguished name: %2 An error has occurred in the service %1 whilst trying to synchronize mailbox properties. Possible cause: The exchange privileged mailbox associated with this service does not exist or is unavailable. Error reading the legacy message store and mailbox distinguished names from active directory for mailbox %1 Error reading the legacy message store and mailbox distinguished names from active directory for mailbox %1 The format of the JournalServiceEntry JournalingMailboxDn attribute is incorrect, it should be the active directory distinguished name of the journal mailbox not the Exchange 5.5 legacy mailbox distinguished name. The service successfully obtained the legacy message store and distinguished name for a mailbox where a previous attempt had failed. The service will proceed to process messages in journal mailbox %1 An error occurred opening the Journaling mailbox %1 Check that the message store is available and the mailbox is accessible The service successfully opened a store that had failed on a previous attempt. The service will proceed to process messages in journal mailbox %1 An error occurred whilst processing the journal mailbox %1, this mailbox is disabled or suspended from archiving. A mailbox that was previously set to disabled or suspended has now become available. The service will proceed to process messages in journal mailbox %1 The journal mailbox, %1, has exceeded its storage quota limits. Please remove all storage quota limits from this mailbox. The service has resumed processing of journal mailbox %1 now that it is not longer limited by quota. The service has been signalled to shutdown. There have been %1 MAPI errors in the last %2 minutes, the Enterprise Vault %3 Service for %4 will be restarted.

There have been %1 MAPI errors in the last %2 minutes, the Enterprise Vault %3 Service for %4 will be restarted. All other services of this type hosted on the local machine will be restarted. There have been %1 MAPI errors in the last %2 minutes, the Enterprise Vault %3 Service for %4 will be restarted. All other Agent services hosted on the local machine will be restarted. There have been %1 MAPI errors in the last %2 minutes, the Enterprise Vault %3 Service for %4 will be restarted. All other Agent, and any Storage, services hosted on the local machine will be restarted. There have been %1 MAPI errors in the last %2 minutes, the Enterprise Vault %3 Service for %4 will be restarted. All other Enterprise Vault services hosted on the local machine will be restarted. Error occurred when sending a MQ message %1 %2 The following message could not be archived by the Archive/Public Folder Service as it may be corrupt. Title: %1 Mailbox: %2 If you see this warning repeatedly contact KVS Support. <p>e.g.<br> The following message could not be archived by the Archive/Public Folder Service as it may be corrupt. <p> Title: Fwd: Mark in ZKO<br> Mailbox: /o=acme/ou=ZKOEUROPEENGINEERING/cn=SUP REO/cn=Dowdp If you see this warning repeatedly contact KVS Support. The following message could not be archived by the Archive/Public Folder Service due to message complexity. Title: %1 Mailbox: %2 No further attempts will be made to archive this message. To override this, clear the "Do not archive this item" property on the message in the mailbox. %1:CRestorationAgent::UpdateShoppingBasket() Exiting routine as we have failed. The message will not be requeued Error Returned %2 %1:CArchivingAgent::IsEligibleForArchive(%3) The message titled: %2 will not be archived as it has a pending reminder. The number of items pending indexing for the archive has grown above the threshold limit. This service will pause for 5 minutes to allow the backlog to clear. Mailbox: %1 Archive Name: %2 Archive Id: %3 Service: %4 <p>e.g.<br> The number of items pending indexing for the archive has grown above the threshold limit. This service will pause for 5 minutes to allow the backlog to clear. <p> Mailbox: /o=ACME/ou=REO/cn=Recipients/cn=journal <br> Archive Name: Journal <br> Archive Id: 43ITR8E453A1ED611BE120002A58CDB441110000ACME.COM<br> Service: Enterprise Vault Journaling Service for ACMEEXCH1<br> An invalid retention category was detected during an archive operation. Items relating to this folder have not been processed. Folder: %2 Mailbox: %1 An invalid retention category was detected while attempting to archive an item Failed to open distribution list [#London ACME IT].<br> Error: Access is denied. [0x80070005] LegacyDN: /o=ACME/ou=LDN/cn=Recipients/cn=?London ACME IT <br> Check that the vault administration account has the correct access rights to this distribution listUnable to find per user information in saveset. Item has been retrieved but some information may be incorrect. Your Enterprise Vault system should be checked for consistency. Contact your local KVS Support representative for further information. VaultID: %1 SavesetID: %2 The following message could not be archived by the Journaling Service because of its codepage. Title: %1 Mailbox: %2 No further attempts will be made to archive this message. The message has been moved to the 'Enterprise Vault Journaling Service\Failed Codepage nnn' folder, where nnn is the codepage number causing the failure. The following message could not be archived by the Journaling Service because of its codepage. Title: %1 Mailbox: %2 An error occurred whilst moving the message to the 'Enterprise Vault Journaling Service\Failed Codepage' folders. The message has been marked as "Do Not Archive", and no further attempts will be made to archive this message. The following message could not be archived by the Journaling Service because distribution list expansion failed. <p> Title: Script review<br> Mailbox: /o=ACME/ou=ZKO/cn=Recipients/cn=E2K <br> MAILBOXES/cn=STEWART <p> No further attempts will be made to archive this message. The message has been moved to the 'Enterprise Vault Journaling Service\Failed DL Expansion' folder.The following message could not be archived by the Journaling Service because distribution list expansion failed. Title: %1 Mailbox: %2 An error occurred whilst moving the message to the 'Enterprise Vault Journaling Service\Failed DL Expansion' folder. The message has been marked as "Do Not Archive", and no further attempts will be made to archive this message. An error occurred processing the external filter '%2'. No more filters will be processed. Error: %1 Mailbox: %3 Message Folder: %4 Message Title: %5 <p>e.g.<br> An error occurred processing the external filter 'KVS.Accelerator.PlugIn.Filter'. No more filters will be processed. <br> Error: No such interface supported [0x80004002] <br> Mailbox: /O=ACME/OU=ZKO/cn=Recipients/cn=Journal-ACME <br> Message Folder: ?Inbox <br> Message Title: Tournament <br><p>e.g.<br> The following message could not be processed by an external filter and has been moved to Journaling Service\Failed External Filter. <br> Mailbox: /O=ACME/OU=ZKO/cn=Recipients/cn=ACME-JOURNAL <br> Title: Tournament <Br> <br> No further attempts will be made to process this message. Mailbox: %1 Title: %2 No further attempts will be made to process this message. The Service Enterprise Vault %2 for %3 has been configured to restart at the current level of %1 operations. The Service Enterprise Vault %2 for %3 has been configured to restart at the current level of %1 operations. The configuration also specifies that all other services of this type hosted on the local machine be restarted. The Service Enterprise Vault %2 for %3 has been configured to restart at the current level of %1 operations. The configuration also specifies that all other Agent services on the local machine be restarted. The Service Enterprise Vault %2 for %3 has been configured to restart at the current level of %1 operations. The configuration also specifies that all other Agent, and any Storage services on the local machine be restarted. The Service Enterprise Vault %2 for %3 has been configured to restart at the current level of %1 operations. The configuration also specifies that all other Enterprise Vault services hosted on the local machine be restarted. There is not enough free memory available to continue. The service for %1 will pause for a while before retrying. %1:initializeAgentServiceEntry() The approaching quota limit message filename is %2 %1:initializeAgentServiceEntry() The exceeded quota limit message filename is %2 %1:initializeAgentServiceEntry() The minimum frequency between repeated quota notifications is %2 hours Unable to send a 'Approaching Vault Quota Limit' notification message. Possible Reason: The message file could not be found. Please refer to 'Editing the Vault Quota Message' in the Administration Help for more information on editing and copying the enabled message file. Unable to send a 'Reached Vault Quota Limit' notification message. Possible Reason: The message file could not be found. Please refer to 'Editing the Vault Quota Message' in the Administration Help for more information on editing and copying the enabled message file. An invalid retention category was detected during an archive operation. Items relating to this folder have not been processed. Mailbox: %1 The MAPI error MAPI_E_FAILONEPROVIDER (0x8004011D) has occurred whilst synchronizing the properties of mailbox /o=First Organization/ou=First Administrative Group/cn=Recipients/cn=testdisabled. The mailbox will not be synchronized until the next scheduled run. AgentExchSynch.cpp (CAgentExchSynch::OpenUserAndStore) [lines {1407,1414,1419,1423,1449,1455}] built Feb 11 13:30:13 2004Could not start the Public Folder service. The service is configured to use an archive that doesn't exist. Archive Id: %1 Could not start the Accelerator Message Handler for random message sampling. Error: %1 Internal References: %2 %3 e.g. Could not filter a message for Accelerator random message sampling. <br> Error: No such interface supported [0x80004002] <br> Internal References: <br> Call error 0x80004002<br> Filter.cpp (CFilter::GetRecipientAuthorInfo) [lines {174,177,179,185,188,197}] built Mar 23 19:23:43 2004 Could not determine message type. Error: %1 Internal References: %2 %3 Summary of categories added to shortcuts: Mailbox: '%1': Total number of shortcuts: %2 Total number of shortcuts without categories: %5 Number of shortcuts updated: %3 Number of shortcuts not updated: %4 The index for the indicated archive has become full. Archiving will cease until a new archive is created. Archive: %1 Mailbox\Folder: %2 ArchiveID: %3 The folder has %1 permissions set that grant all users access to this folder. By default this has not been synchronized to the users archive. MailboxDn: %2 FolderPath: %3The folder has %1 permissions set that grant all users access to this folder. By default this has not been synchronized to the users archive. MailboxDn: %2 FolderPath: %3 Failed to restore the item to the mailbox or public folder, verify that the quota has not been exceeded. %1 Display Name: %2 e.g. A problem has occured while archiving a message. The archived item was not found or is no longer archive pending. Users mailbox dn: /o=ACME/ou=ZKO/cn=Remote Users/cn=DOWDEP Internal reference: CArchivingAgent::MakeItemPendingAndProcessMsg()A problem has occured while archiving a message. The archived item was not found or is no longer archive pending. Users mailbox dn: %1 Internal reference: %2 Task Controller Service started (%1) Task Controller Service stopped Failed to get a policy from the cache. The current mailbox or public folder will not be processed. PolicyEntryId: %1 Identifier: %2 Failed to determine a policy for the mailbox %2. The mailbox will not be processed. This is most likely due to the mailbox not being synchronized with Enterprise Vault. Make sure new mailboxes have been synchronized. Error: %1

Task: %1 There are no target paths available for processing. The folder(s) may have been renamed, deleted, or the Exchange public information store may be unavailable. The Public Folder task '%1' against %2 has stopped The Journal task '%1' against %2 has stopped The Archiving task '%1' against %2 has stopped <br>e.g.<br> The Archiving task 'Mailbox Archiving Task for EXEU3' against EXEU3 has stopped The Archiving task '%1' against %2 has started (%3) <br>e.g.<br> The Archiving task 'Mailbox Archiving Task for EXEU2' against EXEU2 has started (6.0.0.1111) The Journal task '%1' against %2 has started (%3) For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp The Public Folder task '%1' against %2 has started (%3) For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp The task '%1' failed to start due to incorrect user permissions For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp The task '%1' failed to start, probably due to incorrect user permissions For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp The MAPI error MAPI_E_FAILONEPROVIDER (0x8004011D) occurred when opening the mailbox message store during a synchronisation. This generally occurs when the mailbox has been deleted. For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp Starting to process the Public Folder task '%1' against %2. For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp Starting to process the Public Folder task '%1' against %2 (in report mode). For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp The task '%1' failed to log on to Exchange server '%2' using mailbox '%3'. Please ensure that the server is running and that the Vault Service account has sufficient permissions on the server. <br>e.g.<br> The task 'Mailbox Archiving Task for ACME1' failed to log on to Exchange server 'ACME1' using mailbox 'EnterpriseVault-ACME1'. Please ensure that the server is running and that the Vault Service account has sufficient permissions on the server. The number of items pending indexing for the archive has grown above the threshold limit. This Task will pause for %1 minute(s) to allow the backlog to clear. Task: %5 Target: %2 Archive Name: %3 Archive Id: %4 For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp An error occurred while processing shortcuts for the target %1 For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp Could not scan public folder %1, cannot list messages For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp Could not scan public folder %1, cannot list messages For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp There was a problem accessing a network service or resource. The dispenser will re-queue the current item and sleep for %1 minute(s). For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp SMTP Mail Archiving has started successfully. For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp SMTP Mail Archiving encountered a serious error during initialization and is unable to operate correctly. Incoming messages will not be captured by Enterprise Vault and will be saved in the SMTP server 'drop' directory or relayed to another server. Please restart the IIS Admin service and reconfigure SMTP Mail Archiving. For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp SMTP Mail Archiving encountered a serious error resulting in the loss of a message. Last error: %1 Message ID: %2 Sender: %3 Recipients: %4 Last filename: %5 For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp SMTP Mail Archiving failed to save a captured message because the disk is full. Retry will occur every %1 seconds until the message is saved. This may result in a backlog of messages in the SMTP queue. Message ID: %2 Sender: %3 Recipients: %4 Last filename: %5 For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp SMTP Mail Archiving is continuing to attempt to save a message that failed because the disk is full. Retry will continue every %1 seconds until the message is saved. This may result in a backlog of messages in the SMTP queue. Message ID: %2 Sender: %3 Recipients: %4 Last filename: %5 For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp SMTP Mail Archiving has successfully saved a message that initially failed because the disk was full. Message ID: %1 Sender: %2 Recipients processed: %3 Last filename: %4 For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp SMTP Mail Archiving encountered a serious error and was unable to abort the transport of a captured message. The message will be saved in the SMTP server 'drop' directory or relayed to another SMTP server. Message ID: %1 Sender: %2 Recipients: %3 For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp SMTP Mail Archiving required a server-level default folder to save a captured message but one was not specified. The captured message will be deleted. Reconfigure SMTP Mail Archiving to use a server-level default folder. Message ID: %1 Sender: %2 Recipients: %3 For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp SMTP Mail Archiving reached the retry limit (%1) for a message that was not saved because the disk is full. The message will be deleted. Message ID: %2 Sender: %3 Recipients: %4 Last folder: %5 For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp SMTP Mail Archiving failed to load because a valid license key is not installed. Incoming messages will not be captured and will be delivered to the SMTP drop directory or relayed to another server. See the documentation for information on license keys. For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp The 'CodepageDetection' registry key is not compatible with the Outlook 2003 MAPI dll. As a result some services will not start. For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp This Task will suspend processing for %1 minute(s) to allow the Storage service(s) time to catch up. Task: %2 For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp This Task will resume processing. Task: %1 For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp There was a COM error in the journal reporting component. Error: %1 Internal References: %2 %3 For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp There was an error in the journal reporting component. Error: %1 For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp Failed to enable a user mailbox. The system reported 'An invalid directory pathname was passed', this may be because a new user or mailbox has not yet been fully initialized or an existing user or mailbox may have been recently deleted. Task: %2 Mailbox: %1 See the help topic called 'Problems enabling mailboxes' for details of the permissions you need to enable mailboxes. For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp Failed to enable a user mailbox. This could be due to insufficient permissions or the mailbox may have been deleted. Mailbox: %1 See the help topic called 'Problems enabling mailboxes' for details of the permissions you need to enable mailboxes. For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp Failed to disable a user mailbox. This could be due to insufficient permissions or the mailbox may have been deleted. Mailbox: %1 See the help topic called 'Problems enabling mailboxes' for details of the permissions you need to disable mailboxes. For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp The task controller cannot start the following MAPI-dependent tasks because the required version of MAPI is missing or incorrectly configured on the Enterprise Vault server: %1 To resolve the problem: 1. Stop all Enterprise Vault services and processes that are using MAPI. 2. Ensure that a version of MAPI supplied with Microsoft Outlook 2003 or later is installed and correctly configured on the Enterprise Vault server. 3. Restart the Enterprise Vault services. If the problem persists, see the "Troubleshooting" section of the Enterprise Vault Administration help file for guidelines on how to proceed. For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp Cannot start the task because MAPI is incorrectly configured on the Enterprise Vault server. See the "Troubleshooting" section of the Enterprise Vault Administration help file. For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp A new public folder target has been successfully associated with an existing archive. Task:%1 Target:%2 Archive:%3 For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp The temporary transaction identifier cannot be read or written to a message. Archiving and external filtering may not be able to identify the message as a retry if it requires subsequent archive attempts. Error: %1 Internal References: %2 %3 For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp This mailbox has duplicate entries in the directory and cannot be processed. LegacyDN: %1 DefaultVaultID: %2 For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp The default archive defined in this mailbox is already associated with a different mailbox. LegacyDN: %1 DefaultVaultID: %2 For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp <p>e.g.</p><font size="1"> <p><font size="2">Summary for shortcut deletion.</font></p> <p><font size="2">Mailbox: '/o=Enterprise/ou=MDH/cn=ADC/cn=Users/cn=Elwood Dowd':</font></p> <p><font size="2">Total number of shortcuts found: 5132</font></p> <p><font size="2">Number of expired shortcuts deleted: 157</font></p> <p><font size="2">Number of orphaned shortcuts deleted: 0</font></p> <p><font size="2">Number of old shortcuts deleted: 303</font></p> <p><font size="2">Total number of shortcuts remaining: 4672</font></p></font>Summary for shortcut deletion. Public folder '%1': Total number of shortcuts found: %2 Number of expired shortcuts deleted: %3 Number of orphaned shortcuts deleted: %4 Number of old shortcuts deleted: %5 Total number of shortcuts remaining: %6 For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp Enterprise Vault has detected an instance of mailbox DN reuse. Mailbox: %1 Default Vault Id: %2 Exchange Server: %3 Enterprise Vault detected that a mailbox enabled for archiving had been deleted from Exchange and another was subsequently created with the same DN. A fresh entry will be added to Enterprise Vault for the new mailbox. For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp The message being processed is not marked as pending archive and will not be archived. Mailbox: %1 Folder: %2 Subject: %3 Message Class: %4 For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp Error getting an IMessage interface from an IUnknown pointer. For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp

MAPI message is invalid. For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp There was an error applying a change to DeleteOriginal or CancelPending due to an External Filter policy change on the message. Mailbox: %1 Folder: %2 MessageSubject: %3 LogMessage: %4 For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp Mailbox Report Date: %1 System Name: %2 Mailbox Name: %3 Associated Account: %13 Policy: %28 Mailbox State: %20 Mailbox Quota Limit: %14 KB Mailbox Quota Used: %15 KB Percentage of Mailbox Quota free: %16 Number of archivable items in mailbox: %4 Total size of archivable items in mailbox: %5 KB Number of archivable folders in mailbox: %6 Number of items ready to archive: %7 Total size of items ready to archive: %8 KB Number of items that would be archived: %9 Total size of items that would be archived: %10 KB Number of expired shortcuts that would be deleted: %17 Number of orphaned shortcuts that would be deleted: %18 Number of old shortcuts that would be deleted: %19 Start Time: %11 End Time: %12 For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp Public Folder Report Date: %1 System Name: %2 Public Folder start point: %3 Policy: %23 Number of archivable items (from start point): %4 Total size of archivable items (from start point): %5 KB Number of folders processed: %6 Number of items ready to archive: %7 Total size of items ready to archive: %8 KB Number of items that would be archived: %9 Total size of items that would be archived: %10 KB Number of expired shortcuts that would be deleted: %13 Number of orphaned shortcuts that would be deleted: %14 Number of old shortcuts that would be deleted: %15 Start Time: %11 End Time: %12 For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp Mailbox Report Date: %5 System Name: %1 Mailbox Name: %2 Associated Account: %3 Policy: %12 Mailbox State: %4 Number of shortcuts where no action was taken: %11 Number of expired shortcuts that would be deleted: %8 Number of orphaned shortcuts that would be deleted: %9 Number of old shortcuts that would be deleted: %10 Start Time: %6 End Time: %7 For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp Public Folder Report Date: %3 System Name: %1 Public Folder start point: %2 Policy: %10 Number of shortcuts where no action was taken: %9 Number of expired shortcuts that would be deleted: %6 Number of orphaned shortcuts that would be deleted: %7 Number of old shortcuts that would be deleted: %8 Start Time: %4 End Time: %5 For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp No policy information recorded for this mailbox. Provisioning synchronization may be required. For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp The archive task found mailboxes that have not been processed by the provisioning task. The archive task is ignoring these mailboxes. To log the names of these mailboxes to the event log, reset the 'HideMissingPolicyInfoErrors' registry value to 0. See the documentation for further details. Task: %1 For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp A new mailbox already has an entry in the Enterprise Vault database. New mailbox: %1 Existing entry: %2 Reason for conflict: %3 Set the SynchInMigrationMode registry value in order to process this mailbox. See the documentation for further details. For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp A new mailbox was linked to an existing entry in the Enterprise Vault database. New mailbox: %1 Existing entry: %2 Wait until the archive task has finished processing, then reset the SynchInMigrationMode registry value. See the documentation for further details. For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp A new entry in the Enterprise Vault database has been created for a new mailbox that had an existing entry in the database. The existing entry has been renamed. New mailbox: %1 Existing entry renamed to: %2 Reset the SyncInMigrationMode registry value after all affected mailboxes have been processed. See the documentation for further details. For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp This mailbox cannot be processed until the Exchange Provisioning Task has processed the corresponding user's details. Ensure that a Provisioning Group includes this user and run the Provisioning Task. For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp This mailbox already has an entry in the Enterprise Vault database. Set the SynchInMigrationMode registry value in order to process this mailbox. See the documentation for further details. For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp This mailbox has duplicate entries in the directory and cannot be processed. For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp Enterprise Vault could not enable a mailbox because either the Vault Store or Indexing Service were not specified. Ensure that both the Vault Store and Indexing Service are set on the Provisioning Group, the Exchange Server or the Enterprise Vault Server. Mailbox: %1 For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp Enterprise Vault cannot process this Exchange Server because none of the users on this server has been processed by the provisioning task. Do the following: 1. Ensure that provisioning groups have been defined. 2. Run the provisioning task. 3. Run mailbox synchronization/archiving again. Exchange Server: '%1' For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp This mailbox cannot be processed until the Exchange provisioning task has processed the corresponding user's details. Ensure that a provisioning group includes this user and run the provisioning task. To disable these warnings, set the 'HideMissingPolicyInfoErrors' registry value to 1. See the documentation for further details. Mailbox: %1 Message store: %2 For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp The mailbox does not have an entry in the Enterprise Vault database. For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp A new mailbox was found containing Enterprise Vault settings for an existing entry in the Enterprise Vault database. The mailbox has not been linked to the existing entry. Use the 'zap' command in Policy Manager to remove the old Enterprise Vault settings. Mailbox: %1 For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp The Exchange Server %1 is running Exchange Server version 5.5. This version of Exchange Server is not supported by Enterprise Vault. The task will shut down. For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp Failed to determine the provisioning group for the mailbox %2. This mailbox cannot be processed until the Exchange provisioning task has processed the corresponding user's details. Ensure that a provisioning group includes this user and then run the provisioning task. Error: %1 For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp A delay occurred whilst enabling archiving for the mailbox %1 Mailboxes cannot be enabled while the Storage Service state is 'Stopped' or 'Upgrading' or when it is in read-only mode. For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp Archiving target is disabled, processing request will be discarded. Task: %1 Target: %2 For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp This message could not be archived due to it having a conflicting Transaction Id. The conflicting Transaction Id has been removed from the message which will now allow it to be successfully archived on the next archiving run. Item MSMQ Label: %1 For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp The nEVDominoHousekeeping process is shutting down because it is not running under the Enterprise Vault Service Account. Restart the Enterprise Vault Domino Server using the Vault Service account. For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp This folder is being managed by Exchange 2007. Currently there is no EV integration with managed folders. For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp <p>e.g.</p> <p>There were too few archivable items available to take mailbox '/O=ACMEOU=ZKO/cn=Recipients/cn=Dowdp' below the quota-free level of 10%.</p> <div>&nbsp;&nbsp;Quota limit: 200000 KB &nbsp;&nbsp;Quota used: 339062 KB (169% of Quota limit) &nbsp;&nbsp;Required to archive: 158000 KB &nbsp;&nbsp;Actual amount archived: 167 KB</div> <div>&nbsp;You may need to review your mailbox archiving policies to allow more items to be archived if you regularly see this warning for mailboxes.</div>Failed to find configuration information for the %1 Agent in the Directory Service on computer %2 This could be because the Task was deleted before completing all its outstanding work. Task entry id: %3 Further instances of this error will be suppressed. For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp Public folder redirection has been detected. This configuration can adversely affect performance and reliability. This redirection could be either of the following: -The mailbox that is being used to connect to Exchange Server is being redirected to another Exchange Server. -The Public Folder store is not homed locally on the target Exchange Server Exchange Server: %1 Public Folder Task: %2 Redirected to Server: %3 For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp A manual archive operation was rejected since it did not match the users policy. For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp Can not process envelope body for journal archiving as it seems to have invalid content. For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp The following message could not be archived as it seems to have an invalid envelope body. Title: %1 Mailbox: %2 No further attempts will be made to archive this message. The message has been moved to the 'Enterprise Vault Journaling Service\Failed to Copy' folder. For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp The following message could not be archived by the Journaling Service as it seems to have an invalid envelope body. Title: %1 Mailbox: %2 An error occurred whilst moving the message to the 'Enterprise Vault Journaling Service\Failed to Copy' folder. The message has been marked as "Do Not Archive", and no further attempts will be made to archive this message. For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp Can not process envelope message as the attachment appears invalid. For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp The following envelope message could not be archived as the attached message does not appear valid. Title: %1 Mailbox: %2 No further attempts will be made to archive this message. The message has been moved to the 'Enterprise Vault Journaling Service\Failed to Copy' folder. For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp The following envelope message could not be archived as the attached message does not appear valid. Title: %1 Mailbox: %2 An error occurred whilst moving the message to the 'Enterprise Vault Journaling Service\Failed to Copy' folder. The message has been marked as "Do Not Archive", and no further attempts will be made to archive this message. For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp A network error has been reported by ConfigureMsgService. It may be due to a problem contacting a Global Catalogue Server. For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp (To disable these warnings, use the 'HideMovedItemUpdateFailure' registry value. See the documentation for details.) The following item has been moved in the mailbox but it could not be updated in the archive: Mailbox: %2 Folder: %3 Title: %4 Archive folder updated: %5 Retention Category updated: %6 Reason: %1 For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp There were too few archivable items available to take mailbox '%1' below the quota-free level of %2%. Quota limit: %3KB Quota used: %4KB (%5% of quota limit) Previously archived (pending): %8KB Required to archive: %6KB (adjusted %9KB) Amount archived (this run): %7KB You may need to review your mailbox archiving policies to allow more items to be archived if you regularly see this warning for mailboxes. For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp Could not determine message type. For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp Attempt to process Deleted Items folder when ArchiveDeletedItems is OFF. For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp Failed to check a shortcut titled: %1 for expiry, due to missing MAPI attribute: %2 Folder: %3 Mailbox: %4 For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp A shortcut has been deleted because some properties were missing and they could not be repaired. Shortcut: %1 Mailbox: %2 For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp (To disable these warnings, use the 'HideMovedItemUpdateFailure' registry value. See the documentation for details.) The following item has been copied in the mailbox but it could not be updated in the archive: Mailbox: %2 Folder: %3 Title: %4 Reason: %1 For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp The following message could not be archived by the Journal Task as it may be corrupt. Title: %1 Task: %2 Mailbox: %3 Number of corrupt Journal mailbox messages currently identified: %4 The message cannot be moved to the 'Enterprise Vault Journaling Service\Invalid Journal Report' folder and also cannot be marked as "Do Not Archive". For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp Could not get the Message Store entry id to update shortcuts. %Mailbox: 1% %Error: %2 For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp CArchivingAgent::ProcessShortcutUpdate() Mailbox does not exist. The mailbox may have been deleted. Mailbox: %1 Error: %2 For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp CArchivingAgent::ProcessShortcutUpdate() Could not open mailbox to update shortcuts. The shortcut update will be tried again. Mailbox: %1 Error: MAPI_E_NETWORK_ERROR For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp

CArchivingAgent::ProcessShortcutUpdate() Could not open mailbox. Mailbox: %1 Error: Unspecified error For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp Failed to scan mailbox. Could not find any folders in the mailbox. Mailbox: %1 Error: %2 For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp Could not open mailbox. Shortcut processing aborted. See the move archive log for details. Task: %2 Mailbox: %1 Error: %3 For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp Could not retrieve the ArchiveFolderID values. The archive might have been deleted. Shortcut processing aborted. Mailbox: %1 ArchiveID: %2 For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp The shortcut update task could not log on to the Exchange server. Ensure that the mailbox is not hidden, that the server is running and that the Vault Service account has sufficient permissions on the server. Exchange Server: %1 Mailbox: %2 Error: %3 For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp Failed to scan mailbox. Unable to enumerate a subfolder. See the move archive log for details. Mailbox: %1 Folder: %2 For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp Could not retrieve folder property values for shortcut update. See the move archive log for details. Mailbox: %1 Folder: %2 Property: %3 Error: %4 For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp Failed to update the state of move archive shortcut update subtask. Shortcut processing aborted. Mailbox: %1 Error: %2 For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp Failed to initialize or update the subtask checkpoint. Shortcut processing aborted. Mailbox: %1 Error: %2 For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp Failed to post the shortcut update message to the MSMQ queue. Run the archiving task again to start shortcut update. Mailbox: %1 Error: %2 For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp The mailbox is locked by another operation. The move archive shortcut update request will be reposted to the end of the MSMQ queue. Mailbox: %1 For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp Could not open a folder of mailbox. Shortcut processing aborted. Mailbox: %1 Folder: %2 Error: %3 For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp Could not update shortcut. The archiving task cannot process one or more shortcuts to items that have been migrated from Domino. The RestoreShortcutBody registry value is set. This registry value makes the archiving task rebuild Enterprise Vault shortcuts for Exchange Server messages and shortcuts to items that have been migrated from Domino. The archiving task cannot initialize the Lotus Notes runtime in order to process items that have been migrated from Domino. Check that Lotus Notes is correctly installed on the server that is running the archiving task. Exchange Server shortcuts can be processed correctly. For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp Cannot process the mailbox until it has been re-provisioned. The following user object was not found in Active Directory, it may be that the user object has been moved or deleted. AD Object: %1 Legacy DN: %2 For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp The Item is not valid For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp MAPI Session Error For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp Invalid Input XML format For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp Unknown Mailbox For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp Mailbox Registration Failed For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp An invalid retention category has been specified for items with dates in the future. Policy name: %1 Retention category: %2 For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp The author or recipient information is not available. It was not possible to process the message. Task: %1 Message Title: %2 Mailbox DN: %3 For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp The task failed to log on to the Exchange Server. The task is running as a Windows user that is a member of the 'domain admins' group. Remove the user from this group to ensure that the task has sufficient access to the Exchange Server. Task: %1 Exchange Server: %2 Windows user: %3 For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp Unable to access the NT Services database Service: %2 Failed to initialize service synchronization Reason: %1 InternalRef: [%3] Service: %2 Failure during Service synchronization wait Reason: %1 InternalRef: [%3] Example:<p> Enterprise Vault Indexing Service Service startup is delayed pending service synchronization <p> The service depends on one or more Enterprise Vault services and is waiting until they are all fully operational. Service startup will fail if service synchronization takes longer than 30 minutes. Note that the Services Control Panel dialog box will show this service as running even though it is not fully operational <p> The most likely cause of the delay is that the Directory service is not running Example:<p> Enterprise Vault Indexing Service Service startup is continuing following completion of service synchronization <p> The service depends on one or more Enterprise Vault services and had to wait for those services to become fully operational %1 Startup is being canceled due to failure of service synchronization The service depends on one or more Enterprise Vault services that have not become fully operational during the service synchronization period The most likely cause of the failure is that the Directory service is not running <br>e.g.<br> Enterprise Vault Public Folder Service - ACME IT is being canceled due to failure of service synchronization The service depends on one or more Enterprise Vault services that have not become fully operational during the service synchronization period. <br> The most likely cause of the failure is that the Directory service is not running%1 Service stopped during service synchronization The service depends on one or more Enterprise Vault services and was requested to stop whilst waiting for those services to become fully operational. Service: %2 Failed to read the SiteID value from the Registry Reason: %1 Key: %3 Service: %2 Failed to read the Directory Service name from VaultCommonResource.dll Reason: %1 Service: %2 Failed to determine the current status of the Directory Service Reason: %1 The service is trying to synchronize with the site Directory Service but has encountered an error Internal Reference: [%3] Service: %2 Failed to determine the current status of the Indexing Service(s) Reason: %1 The service is trying to synchronize with the Indexing Service(s) but has encountered an error Internal Reference: [%3] Service: %2 Failed to complete service synchronization Reason: %1 The service is trying to synchronize with other Enterprise Vault services but has encountered an unrecoverable error Internal Reference: [%3] The Admin Service could not be started because the Service Handler is not installed The Admin Service is completing its preliminary checks... The Admin Service has successfully completed its preliminary checks and has started (%1) <br>For example:<br> The Admin Service has successfully completed its preliminary checks and has started (5.0.0.5562)The Admin Service has stopped The Admin Service received a bad control request from the handler Failed to determine the name of the computer Failed to grant the %1 user rights to the Vault Site Account %2. It may be possible to add this user right manually. Make sure that the Vault Site Account has the "Act as part of the operating system" and "Log on as a service" advanced user rights on the computer %3. Please use the User Manager for Domains utility to do this. Successfully granted the %1 user rights to the Vault Site Account %2 on the computer %3 The Vault Site Account, %1, is not a member of the local Administrators group on computer %2 Please use the User Manager for Domains utility to add the Vault Site Account to this group. The Vault Site Account, %1, is a member of the local Administrators group on computer %2 The Admin Service preliminary checks have failed. Please correct any problems and start the service again. Failed to read the Site Id from the registry whilst initializing the service The Admin Service has not performed any preliminary checks. To perform these important checks on startup please delete the following registry key:%1 The Admin Service has configured itself to work with all existing Vault Services

Failed to configure the Admin Service due to a problem with the Service Control Manager. Subsequent attempts will be made each time the Admin Service is started up. Failed to make the Enterprise Vault service, %1 dependent on the Admin Service. Subsequent attempts will be made each time the Admin Service is started up. New service dependency: %1 is now dependent on the Enterprise Vault Admin Service. Existing service dependency: %1 is already dependent on the Enterprise Vault Admin Service. Failed to query the NT service, %1. Subsequent attempts will be made each time the Admin Service is started up. Failed to open the service, %1. Subsequent attempts will be made each time the Admin Service is started up. Failed to make the necessary checks due to a problem with the Service Control Manager. Subsequent attempts will be made each time the Admin Service is started up. Unexpected error occurred during the configuration or preliminary checks stages of the Admin Service startup. The Vault service %1 is configured to run under the Local System account. It should be configured to run under the Vault Service Account. Completing preliminary checks for account %1. Identified as an Enterprise Vault Service: %1 Evaluating service for possible Vault configuration: %1 The Directory service is running under the account %1. It should be running under the LocalSystem account. %1 Unable to synchronize with an Enterprise Vault Service. The service is not present in the target computer's NT Services configuration. The Enterprise Vault site may not be fully configured, or the service may have been deleted from the NT Services configuration. Computer: %2 Service database name: %3 Configuration of the Enterprise Vault site should be completed prior to starting this Enterprise Vault service. %1 Unable to synchronize with the Enterprise Vault Indexing Service. There are no Indexing Services configured in the Enterprise Vault site. The Enterprise Vault site may not be fully configured, or the Indexing Services may have been deleted Configuration of the Enterprise Vault site should be completed prior to starting this Enterprise Vault service The Admin Service has paused Resource monitoring has been stopped The Admin Service has resumed Resource monitoring has been restarted Resource monitoring call failed with error: %1 Resource monitoring has been stopped Insufficient Virtual Memory is available for the Enterprise Vault to run Enterprise Vault will now be shutdown; to correct this problem, free memory by closing any unwanted applications and restart Enterprise Vault Insufficient diskspace is available on drive {drive} for the Enterprise Vault to run Enterprise Vault will now be shutdown; to correct this problem, delete any unwanted files and restart Enterprise Vault Insufficient diskspace is available for the Enterprise Vault to run Enterprise Vault will now be shutdown; to correct this problem, delete any unwanted files and restart Enterprise Vault Insufficient Diskspace is available on drives %1 and %2 for the Enterprise Vault to run Enterprise Vault will now be shutdown; to correct this problem, delete any unwanted files and restart Enterprise Vault The system is running out of Virtual Memory - free memory by closing any unwanted applications Enterprise Vault will be shutdown when %1% of Virtual Memory is used The system is running out of diskspace on drive %1 - delete any unwanted files Enterprise Vault will be shutdown when %2% of the diskspace is used <br>For example:<br> The system is running out of diskspace on drive G: - delete any unwanted files Enterprise Vault will be shutdown when 99% of the diskspace is used The system is running out of diskspace - delete any unwanted files Enterprise Vault will be shutdown when %1% of the diskspace is used The system is running out of diskspace on drives %1 and %2 - delete any unwanted files Enterprise Vault will be shutdown when %3% of the diskspace is used Failed to stop the Enterprise Vault services due to a problem with the Service Control Manager. Failed to stop the Enterprise Vault services due to a problem with the Service Control Manager. Failed to open the %1 service. The %1 service failed to respond to the STOP request in a timely manner. This may be due to the service getting insufficient CPU time; check subsequent event log entries for a "successfully stopped" message. If the service is still running, manually stop the service and check the event log for any errors logged by the service. <br>e.g.<br> The Enterprise Vault Archiving Service for ACMEEXCH1 service failed to respond to the STOP request in a timely manner. This may be due to the service getting insufficient CPU time; check subsequent event log entries for a "successfully stopped" message. If the service is still running, manually stop the service and check the event log for any errors logged by the service. Resource monitoring has been disabled at user request Failed to start the resource monitoring Message: %1 The Enable Mailbox wizard has failed to start Lots more interesting stuff *** Facility: %2 Internal Reference: [%3] Message: %1 Failed to create an Organization object Facility: %2 Internal Reference: [%3] Message: %1 Failed to load Organization details Facility: %2 Internal Reference: [%3] Message: %1 License checking has identified that there is no local Admin Service. Full license checking has not been performed. Facility: %2 Internal Reference: [%3] The system has more CPUs than you are licensed for. Please contact your license supplier to obtain a proper license Your license expires in 31 days Your license expires at midnight tomorrow Please contact your license supplier to obtain a new license Your license expires at midnight Please contact your license supplier to obtain a new license Your license has expired Enterprise Vault will continue, but with reduced functionality To restore Enterprise Vault to full functionality, please contact your license supplier to obtain a new license Your license file is invalid (contents corrupt) If the license file was created manually, please double check that the license details were entered correctly and not mis-typed. Otherwise, replace the license file with the one supplied to you, (for example from a backup) Enterprise Vault will continue, but with reduced functionality Your license file is not valid for this system (wrong HOSTID) Your license file is locked to a particular system, and is only valid on that system. If the license file was created manually, please double check that the license details are for this system. Otherwise, replace the license file with the one supplied to you for this system Enterprise Vault will continue, but with reduced functionality Please contact your license supplier to obtain a valid license An unhandled exception has been raised. Command Line: %1 Process Id: %2 Thread Id: %3 Exception Id: %4 Instruction Address: %5 Stack Trace: %6 Stack Trace(basic): %7 Registers: %8 An exception is raised when a process encounters an unexpected fault. Contact your support representative with details of this and any preceding errors. An unhandled access violation has occurred. <p> Command Line: "C:\Program Files\Enterprise Vault\{server executable}" <br> Process Id: %2<br> Thread Id: %3<br> Exception Id: %4<br> Instruction Address: %5<br> Memory Access Type: %6<br> Memory Address: %7<br> Stack Trace: %8 Stack Trace(basic): %9 Registers: %10 <p> The process has attempted to access a protected memory address. Contact your support representative with details of this and any preceding errors. An exception has been raised. Internal reference %1 %2 An exception is raised when a process encounters an unexpected fault. Contact your support representative with details of this and any preceding errors. <BR>e.g.<br> An exception has been raised. <br> Internal reference Filter.cpp (CFilter::FinalConstruct) [lines {27,31}] built Jun 17 15:39:02 2004 <br> An exception is raised when a process encounters an unexpected fault. Contact your support representative with details of this and any preceding errors. Memory mapped stream is already open Name: %1 Memory mapped stream is not open Name: %1

An exception has occurred in the Memory Mapped Stream object Name: %2 Type: %3 Reference: %4 Reason: %1 <br>e.g.<br> An exception has occurred in the Memory Mapped Stream object <br> Name: C$6$SRC<br> Type: e <br> Reference: "R" <br> Reason: Catastrophic failure [0x8000ffff] <br>Abnormal error occurred within the Memory Mapped Stream object Name: %1 Reference: %2 Stream is already open Name: %1 Stream is not open Name: %1 An exception has occurred in Stream object Name: %2 Type: %3 Reference: %4 Reason: %1 Abnormal error occurred in Stream object Name: %1 Reference: %2 There is no Private Information Store on the Microsoft Exchange 2000 server %1. The account that this Service is running under is not a member of the local Administrators group on this computer. The account that this Service is running under is not a member of the local Administrators group on this computer. A C Runtime debug report has been raised. Report Type: %1 Report: %2 Process Id: %3 Command Line: %4 NOTE: The process may be hung awaiting user response to a Windows message box. If the process is not running under the same user account as the current desktop then the message box may not be visible. In this situation it may be possible to investigate the error that generated the debug report by attaching a debugger to the process. Abnormal error occurred within the Cache Base object Name: %1 Reference: %2 Failed to grant user rights: %tAccount: %1 %tError: %2 The Admin Service will retry for another %3 minutes. Failed to update the DCOM details for computer: %1. There have been more than %1 Errors in the last %2 seconds, of which %3% or more are from Enterprise Vault. Enterprise Vault will now shut down. <br>For example:<br> There have been more than 10000 Errors in the last 7200 seconds, of which 90% or more are from Enterprise Vault. Enterprise Vault will now shut down. Vault Store: %1 No Partition for this Vault Store. Archiving to this Vault Store is not possible until Partition created. Facility: %2 Internal Reference: [%3]<br>e.g.<br> Vault Store: CenteraStore No Partition for this Vault Store. Archiving to this Vault Store is not possible until Partition created. Facility: Vault Administration Console Internal Reference: [VAC/NVS1] The Vault service %1 must be configured to run under the Local System account. An error occurred on the first attempt to read a performance counter: Object: %1 Counter: %2 Instance: %3 Handle: %4 Error: %5. An error occurred while attempting to read a value from a performance counter: Object: %1 Counter: %2 Instance: %3 Handle: %4 Error: %5. <br> e.g.<br> An error occurred while attempting to read a value from a performance counter: <br> Object: Memory <br> Counter: % Committed Bytes In Use <br> Instance: Handle: 0x00000000<br> Error: 0xC0000BBC. <br> An error occurred while attempting to read a WMI Property: Object: %1 Counter: %2 Instance: %3 Property: %4 Error: %5. An error occurred while attempting to read a WMI Property: Object: %1 Counter: %2 Instance: %3 Error: %4. An error occurred in the thread control the Enterprise Vault .NET server processes Error: %1 Reference: %2 Additional Info: %3 %4 The Enterprise Vault .NET server processes can be restarted by pausing and resuming the Enterprise Vault Admin Service. The .NET Framework 1.1 is not installed on your system. File System Archiving functionality will not work correctly. %1 did not contain the sections required by Enterprise Vault. It has been backed up and updated using %2. %1 did not contain the sections required by Enterprise Vault. Attempt to update the file failed with system error %2. Attempt to backup %1 to %2 failed with system error %3. The file will not be updated Could not find path to %1 version of mapisvc.inf. The file cannot be verified %1 requires updating but %2 did not contain all of the sections required by Enterprise Vault. The update failed. The system is running out of diskspace on drive %1 - delete any unwanted files Enterprise Vault will be shutdown when less than %2 Mb of diskspace remains For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp The system is running out of diskspace - delete any unwanted files Enterprise Vault will be shutdown when less than %1 Mb of diskspace remains For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp The system is running out of diskspace on drives %1 and %2 - delete any unwanted files Enterprise Vault will be shutdown when less than %3 Mb of diskspace remains For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp The account that the task '%1' is running under is not a member of the local Administrators group on this computer. For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp The account that the Task is running under is not a member of the local Administrators group on this computer. For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp Enterprise Vault Event Log is full. Events will be written into the Application Event Log until space is available in the Enterprise Vault Event Log. For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp Enterprise Vault Converters Event Log is full. Events will be written into the Application Event Log until space is available in the Enterprise Vault Converters Event Log. For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp A locking error has occurred Reason: %1 Internal reference: %2 Info: %3 %4 For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp The register of items is full and has been purged to make space. Register: %1 This may result in items that cannot be processed due to repeated errors taking several more attempts before processing is abandoned. For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp Due to an internal error the facility to limit attempts to abandon items that cause repeated failures has been disabled. Reason: %1 Register: %2 Reference: %3 This may result in items that cannot be processed due to repeated errors blocking processing of other items. For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp The Enterprise Vault services cannot start because an error has occurred writing a required setting to the registry. Reason: %1 For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp Machine and application permissions have been added for ANONYMOUS LOGON group. See Help for more information. For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp Could not obtain the service entry identifier for this service Service name: %2 Error: %1 Internal reference: %3 For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp Could not update the service entry identifier parameter for this service Service name: %2 Error: %1 Internal reference: %3 For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp The process has been terminated because of a buffer overflow. Command Line: %1 Process Id: %2 Thread Id: %3 Stack Trace: %4 Stack Trace (basic): %5 For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp Enterprise Vault is configured in a cluster. You must use the cluster software to bring the service online. The service cannot be started using the Windows Service Control Manager. The service will now stop. For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp License checking has identified that you are currently licensed for the following features: %1 For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp License checking has identified that you currently do not have any licensed features. Please contact your license supplier to obtain a new license. For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.aspUser '%1' attempted to use methods which require administrator privileges. For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp Access denied. User is not in a role that allows '%2'. User: '%1' For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp Required license not installed. An Enterprise Vault license is required for the following feature but the license is not installed: Feature: %1 Feature Code: %2 %3 See the 'Installing and Configuring' manual for information about licenses. For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp

Required license not active. An Enterprise Vault license is required for the following feature but the installed license is not currently active: Feature: %1 Feature Code: %2 %3 See the 'Installing and Configuring' manual for information about licenses. For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.aspFailed to install license file. License file path: %1 Reason: %2 For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp Failed to handle delay loading of EVRT.dll (Review and correct list of EVRT.dll routines in the EVRTProxy namespace in EVStgAPI.cpp) For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp Failed to look up the anonymous user account. Account: %1 Reason: %2 For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp The anonymous user account is not valid Account: %1 Account Type: %2 For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp Authentication is currently being delayed due to a suspected brute-force attack. Number of failures: %1 Delay period remaining: %2 (mins:secs) During this period users will experience short delays when searching or accessing archived items. For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp Authentication request failed. Reason: %1 Caller: %2 Token: %3 Failure Count: %4 For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp Enterprise Vault could not initialize the Lotus Notes runtime. Ensure that the Notes client is installed on this computer and restart the Admin Service. For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp An unsupported version of Microsoft Outlook is installed on this server. All services and tasks will continue to run but you may experience issues during archiving and retrieving of Exchange Server items. Installed Outlook version: %1 Refer to the compatibility charts for supported versions. http://entsupport.symantec.com/docs/276547 For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp Vault Store Group: %1 There are no Vault Stores in this Vault Store Group. Archiving to this Vault Store Group will not be possible until a Vault Store is created. Facility: %2 Internal Reference: [%3] For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp An error occurred in thread pool used for processing requests. Further error information: %1 Internal reference: %2 For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp Request thread pool (InstanceId = [%1]) started with maximum thread count = [%2]. For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp Request thread pool (InstanceId = [%1]) stopped. Total threads stopped = [%2]. For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp Attempted to stop all active requests in the thread pool (InstanceId = [%1]). Total active requests attempted to be stopped = [%2]. Total pending requests removed from the thread pool = [%3]. For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp Thread pool (InstanceId = [%1]) could not create all the requested [%2] threads. Total threads created = [%3]. For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp Thread pool (InstanceId = [%1]) can not support requested [%2] threads. Maximum [%3] threads are allowed. Thread pool will not be created. For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp Thread pool (InstanceId = [%1]) could not stop [%2] requests. Total requests attempted to be stopped = [%3]. For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp Thread pool (InstanceId = [%1]) could not stop a request (cookie = [%2]) after maximum wait time. For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp Failed to change the Vault Service account details on computer %1. For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp Failed to change the Vault Service account details for service %1 on computer %2. For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp Failed to open the Service Control Manager on computer %1. For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp Thread pool (InstanceId = [%1]) could not read the top request object (cookie = [%2]) from the pending requests queue. For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp Microsoft Outlook is installed but is not the default mail client. Configure Microsoft Outlook to be the default mail client. See the requirements for Exchange Server archiving in 'Installing and Configuring'. For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp Currently shopping for: %1\%2 Couldn't create a %1 %tInterface: %2 %tError: %3 %tComputer: %4 Failed to update the restoration status of a restoring itemThe ShoppingService root directory (%1) does not exist Created the Shopping subdirectory for %1 Failed to create the Shopping subdirectory: %t%1 Failed to get the client's security context Updated the restoration status for: TransactionID: %1 SaveSetID: %2 Failed to rename basket Shopper: %1\%2 BasketID: %3 Created a new basket: %tShopper: %1\%2 %tBasketID: %3 Failed to connect to the Shopping Service Failed to set shopping directory %1 Failed to save the basket description. Shopper: %1\%2 BasketID: %3 Failed to save the basket contents Shopper: %1\%2 BasketID: %3 Failed to save the basket Shopper: %1\%2 BasketID: %3 Failed to create the basket description record Shopper: %1\%2 BasketID: %3 Failed to open the basket description record Shopper: %1\%2 BasketID: %3 Failed to create file Name: %1 Error: %2 <br>e.g.<br> Failed to create file Name: C:\Shopping\ACMEDOM\DOWDEP\20040707151820580.bsk Error: 0x80030003Failed to open file: %1 A basket description could not be saved to disk properly: Shopper: %1\%2 BasketID: %3 A basket description could not be read from disk properly: Shopper: %1\%2 BasketID: %3 The following basket has been successfully saved to disk: Shopper: %1\%2 BasketID: %3 The following basket description has been successfully saved to disk: Shopper: %1\%2 BasketID: %3 Failed to create a new basket Shopper: %1\%2 BasketName: %3 The Shopping Service did not create the shopper's subdirectory under the expected root directory. Expected root directory: %1

Failed to build the basket description Shopper: %1\%2 BasketID: %3 Failed to build the basket contents Shopper: %1\%2 BasketID: %3 Failed to build the basket Shopper: %1\%2 BasketID: %3 The following basket has been successfully built: Shopper: %1\%2 BasketID: %3 Failed to get the following basket: Shopper: %1\%2 BasketID: %3 Failed to find the following basket description: Shopper: %1\%2 BasketID: %3 Failed to complete operation due to a missing BasketID Shopper: %1\%2 Failed to get the basket descriptions: Shopper: %1\%2 All basket descriptions have been built: Shopper: %1\%2 An invalid basket description index was given: Shopper: %1\%2 No basket items were supplied for addition to the basket The basket must be open to perform the required task Failed to add some new items to the basket Shopper: %1\%2 BasketID: %3 An invalid basket item index was given: Shopper: %1\%2 Failed to locate a Basket Item on disk An attempt was made to add items to a basket: Shopper: %1 BasketID: %2 Items Processed: %3 Unique Items Added: %4 Couldn't get the %1 interface of a %2 object. Successfully restored the following basket. Shopper: %1\%2 BasketID: %3 The basket needs to be either 'open', 'failed' or 'cancelled' to be restored. Failed to access directory %1 This may be due to incorrect access permissions. None of the items in a basket could be restored. The basket item is corrupt so it cannot be saved to disk. The restoration status of the basket cannot be updated: Basket: %1 No basket items were supplied for removal from the basket. Failed to remove some unwanted items from the basket. Shopper: %1\%2 BasketID: %3 An attempt was made to remove items from a basket: Shopper: %1 BasketID: %2 Items Processed: %3 Items Removed: %4 Error loading Shopping resource Failed to delete the basket description Shopper: %1\%2 BasketID: %3 Deleted the following basket: %tShopper: %1\%2 %tBasketID: %3 <br>e.g.<br> Deleted the following basket:<br> Shopper: acme\dowdp <br> BasketID: 20040705143853367<br>Failed to delete the following Basket: %tShopper: %1\%2 %tBasketID: %3 <p>e.g.<br> Failed to delete the following Basket:<br> Shopper: ACME\dowdp<br> BasketID: 20040220184004191<br>The required operation cannot be performed because the basket is still restoring Emptied the following basket: %tShopper: %1\%2 %tBasketID: %3 Failed to get the Shopping Basket root directory from the Shopping Service. Failed to set the security attributes for the following Shopper: %tShopper: %1\%2 Failed to set the file security on the following directory, so it has been deleted: %t%1 The Shopping Service can now be deleted because no Basket data will be lost. The Shopping Service can no longer be deleted because Basket data will be lost. Failed to set the flag in the Directory Service that prevents the Shopping Service from being deleted. The Shopping Service directory information has been successfully retrieved. Failed to retrieve the Shopping Service directory information. The Shopping Service could not be started because the Service Handler is not installed. The Shopping Service has started (%1) The Shopping Service has stopped The Shopping Service received a bad control request from the handler. Failed to retrieve the Shopping EntryID from the Directory Service. Failed to retrieve the Shopping Root Path due to a locking problem Failed to set the Proxy Security on the Shopping Service due to a locking problem Failed to retrieve the Shopping Service EntryID due to a locking problem

Failed to retrieve the Shopping Service Directory information due to a locking problem Failed to read the following registry key: %1 Failed to retrieve the Vault Site ID from the registry due to a locking problem Successfully read and cached the Vault Site ID from the registry. Failed to update the restoration status of a restoring item because the basket has been deleted. Failed to find the following basket description: Shopper: %1\%2 BasketID: %3 The restoration of an item failed because the interactive user was identified as the SYSTEM account. Failed to retrieve the Shopping Service Trace Level due to a locking problem Failed to retrieve the Shopping Trace Level from the Shopping Service. No restoration location was specified when attempting to restore a basket. No Exchange Server and Mailbox were specified when attempting to restore a basket. No Retrieval Agent could be found in the Vault Directory for the following Exchange Server: {Exchange Server name}No Computer could be found in the Vault Directory for the following Retrieval Agent: %1 The creation of a Shopper's subdirectory failed because the interactive user was identified as the SYSTEM account. Failed to identify the interactive user Successfully closed the %1 mutex. Failed to update the restoration status of an item in a basket, due to it being locked. This can sometimes happen when restoring large baskets and does not cause any harm. The Retrieval Agent will keep trying until the basket becomes unlocked. Failed to create the %1 mutex. Reason: %2 Failed to restore an item from the Web Application: Shopping Service ID: %1 SaveSet ID: %2 Vault ID: %3 Retrieval Agent ID: %4 Failed to identify the interactive user: Routine %1 failed with status %2 Reason: %3 %1 %2 %1 %2 %1 %2 %3 %1 %2 %3 Not all the items could be added to the basket The Retrieval Service on computer %1 is not running. The Shopping Service cannot restore any baskets until the Retrieval Service is running. A COM exception occurred while verifying a mailbox's distinguished name. %tSource: %1 %tDescription: %2 This could be the result of undetected problems occurring when CDO.DLL was installed. <br>e.g.<br> A COM exception occurred while verifying a mailbox's distinguished name.<br> Source: Collaboration Data Objects<BR> Description: [Collaboration Data Objects - [MAPI_E_UNCONFIGURED(8004011C)]]A general exception occurred while verifying a mailbox's distinguished name. This could be the result of undetected problems occurring when CDO.DLL was installed. The Shopping Service failed to initialize MAPI. Users will not be able to restore their baskets. Failed to get the Basket Collection %tInterface: %1 Failed to get the Basket with ID %1 from the Basket Collection %tInterface: %2 Failed to restore the shopping basket %tInterface: %1 Failed to initialize the COM library. The worker thread will terminate %tWorker Thread: %1 Failed to impersonate the current shopper Could not call CoImpersonateClient() %tClass: %1 %tMethod: %2 Failed to retrieve the thread data passed when creating the worker thread. The worker thread will terminate and the shopping basket will not be restored %tWorker Thread: %1 There were no items in the basket in a state to be restored. This Enterprise Vault server is running in a building blocks environment and is hosting another Enterprise Vault server. The Shopping Service data file locations for the following Enterprise Vault servers do not match: %2: %3 %4: %5 Please set these locations to be the same and restart the Shopping Service. For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp The Shopping Service cannot perform the requested MAPI dependent operation because the required version of MAPI is missing or incorrectly configured on the Enterprise Vault server: To resolve the problem: 1. Stop all Enterprise Vault services and processes that are using MAPI. 2. Ensure that a version of MAPI supplied with Microsoft Outlook 2003 or later is installed and correctly configured on the Enterprise Vault server. 3. Restart the Enterprise Vault services. If the problem persists, see the "Troubleshooting" section of the Enterprise Vault Administration help file for guidelines on how to proceed. For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp The Vault is busy Access denied An action was attempted on an uninitialized Saveset Error adding a user to a saveset %1 An attempt was made to open a copy of a Saveset in Create or Write mode Services using copies of Savesets must treat them as read-only items. An attempt was made to access the root storage interface of the copy of a Saveset Services using copies of Savesets must be treat them as read-only items. An attempt was made to set an attribute of the copy of a Saveset Services using copies of Savesets must be treat them as read-only items. An attempt was made to initialize a copy of a Saveset Services using copies of Savesets must be treat them as read-only items. An IStorageOnline interface has been obtained from the object just created on "%1" Archive Server receive thread started

Archive Server receive thread stopped normally Queue "%1" successfully opened Queue "%1" successfully deleted Queue "%1" successfully created Saveset for "%1" has been stored in file %2 The size of the message buffer used for MSMQ message bodies has been automatically increased due to a detected mismatch in expected body size. No action is necessary HTML Export converters successfully initialized Saveset message data failed to initialize Archive Server receive thread failed to initialize %1 Failed to obtain Format Name of queue "%2" %1 Failed to create queue "%2" %1 Failed to open queue "%2" %1 Failed to close queue "%2" %1 Failed to initialize queue object %1 Failed to add saveset message to queue object %1 Failed to receive saveset message from queue object %1 Error receiving saveset %1 Error occurred receiving saveset Check previous entries in Event Log Error creating saveset object %1 <br>e.g.<br> Error creating saveset object<br> Not enough storage is available to complete this operation. [0x8007000e]Error creating saveset file %1 Error opening saveset file Reason: %1 File: %2 <br>e.g.<br> Error opening saveset file <br> Reason: A device attached to the system is not functioning. [0x8007001f] <br> File: G:\Enterprise Vault Stores\ACMESTORE1\2002\09\05\11\321564000000000~200209051146190000~0.DVS Error mapping saveset file Reason: %1 File: %2 Error adding Queue Information to saveset Error mapping view of saveset file %1 <br>e.g.<br> Error mapping view of saveset file Not enough storage is available to process this command. [0x8] Saveset is too big to process Error populating saveset file %1 Error opening saveset object on storage %1 Error sending saveset to Storage Server Check Event Log for previous errors Error opening storage on lockbytes memory %1 <br>e.g.<br> Error opening storage on lockbytes memory already exists. [0x80030050]Error creating memory for saveset %1 Error creating docfile for saveset %1 <br>e.g.<br> Error creating docfile for saveset Not enough storage is available to process this command. [0x80070008]Error, Could not open the storage for "%2" in a saveset %1 Error, Could not create the storage for "%2" in a saveset %1 A Saveset was not created in memory before attempting to store it A problem with registry settings caused the saveset not to be queued See previous events for additional information Storage Stat call failed %1 Error allocating memory Too many queue properties have been specified Failed to create Event object %1 Error occurred waiting for event object(s) %1 Failed to begin transaction %1 Error occurred getting message property %1 Error occurred setting message property %1 Error occurred when sending a message %1 Error occurred when receiving a message %1 Error occurred when peeking a message %1 An error occurred processing message notification. Either a zero-byte message was found on the queue, or a problem exists with the queue preventing message retrieval from occurring correctly Error occurred when creating a lockbytes object %1

Error occurred when attempting to write to an ILockbytes object %1 Error occurred when attempting to read from an ILockbytes object %1 Error occurred when changing size of lockbytes object %1 Error occurred when obtaining lockbytes memory handle %1 Error occurred when flushing lockbytes data %1 Error occurred when creating a cursor %1 <br>e.g.<br> Error occurred when creating a cursor There are insufficient resources to perform the operation. [0xc00e0027] Error occurred when closing a cursor %1 Lockbytes refcount is non-zero - expected to be zero No further action is necessary. Could not read the number of processes and threads from the Directory for Storage Service Entry %1. Using default values of 1 process and 1 thread per server component. Error loading string resource %1 Error loading string resource %1 Storage Restore Server started Storage Restore Server stopped Storage Replay Index Server started Storage Replay Index Server stopped Storage Archive Server started Storage Archive Server stopped Storage File Watch Server started Storage File Watch Server stopped Storage Service started (%1) <br>For example:<br> Storage Service started (5.0.0.5562) Storage Service stopped Storage Restore Server start failure Storage Replay Index Server start failure Storage File Watch Server start failure Storage Archive Server start failure Failed to initialize the MAPI sub-system Reason: %1<br> e.g. Failed to initialize the MAPI sub-system Reason: 0x8004005Error creating Index Update object Reason: %1 Error creating Indexable Item object %1 Error creating Per User Information object Error opening the archivable item Error creating message object Error obtaining indexable item data handle Error getting the indexable item from a saveset %1 Error adding item to index Reason: %1 Vault: %2 Folder: %3 Subject: %4 Author: %5 Saveset ID: %6 Error establishing ILockBytes interface Error adding Author attribute to indexable item Error adding Subject attribute to indexable item Error adding Importance attribute to indexable item Error adding Modified Date attribute to indexable item Error retrieving MAPI property identifier tags from archivable item Error retrieving MAPI property values from archivable item Error adding Archive Date attribute to indexable item Error adding User ID attribute to indexable item Error retrieving Original Location from saveset Error adding Original Location attribute to indexable item Error retrieving Location Shortcut from saveset Error adding Location Shortcut attribute to indexable item Error retrieving Retention Category from saveset

Error adding Retention Category attribute to indexable item Error adding Vault Identifier attribute to indexable item Error retrieving Vault Identifier from saveset Error adding Sequence Number attribute to indexable item Error adding Indexing Reason attribute to indexable item Error adding Saveset Identifier attribute to indexable item Error saving indexable item to saveset Error converting message RTF content Unable to access the message text content Reason: %1 Item: %2 Subject: %3 Error adding text content to indexable item Restore Server receive thread started Restore Server receive thread stopped normally Restore Server receive thread failed to initialize %1 Error sending Saveset Restore request to Storage Server Check Event Log for previous errors Failed to open the IVaultStore interface to the Enterprise Vault VaultStore Class COM component Reason: %1 Failed to open the IArchivingAgentUpdate interface to the Enterprise Vault ExchangeArchivingAgent Class COM component Reason: %1 Failed to open the IExchangeShortcutAccessor interface to the Enterprise Vault ExchangeShortcutAccessor Class COM component Reason: %1 Failed to open the IExchangeLocation interface to the Enterprise Vault ExchangeLocation Class COM component Reason: %1 Error getting Archive Parameters block Error getting ShortCut Accessor Error getting Exchange location Error inserting Saveset file into Vault Store volume. Reason: %1 <p>e.g.<br> Error inserting Saveset file into Vault Store volume. Reason: There is not enough space on the disk. [0x80070070] Error from UpdateShortcut Failed to inform the %2 Service of successful storage of a Saveset in a Vault Store. Reason: %1 <br>e.g.<br> Failed to inform the Agent (18C4A4BCB9D6B324A96D897BF9B031E5A1110000XXXXXX.XXXX.XXX) Service of successful storage of a Saveset in a Vault Store. Reason: Failed to calculate the service entry table, unrecognized service entryID [0xc0040901] Error creating RestorationAgentUpdate class Error getting Restore Parameters block Error generating Index Sequence number Error querying an IUnknown pointer for its ISaveset interface %1 Error receiving Saveset Restore request %1 Error occurred receiving Saveset Restore request Check previous entries in Event Log Error adding Saveset to Spool queue Reason: %1 Could not obtain the computer name on which to query for an IStorageOnlineOpns interface <br>Access is denied. [0x80070005]Error Could not obtain the status of a saveset %1 <br>e.g.<br> Error Could not obtain the status of a saveset<br> Access is denied. [0x80070005] Error Could not delete a saveset %1 <br>e.g.<br> Error Could not delete a saveset 187400000000000~200405062357510000~0~68917449E082498B9F6AE2905911952Error deleting a saveset file from a vault store on "%2" %1 Error deleting saveset "%2" from its associated index Reason: %1 Error obtaining the status of a saveset on "%2" %1 e.g.<br> Unable to fetch item from "vault.acme.com", if an HSM is being used check that it is running <br> Access denied [0xc0041801] <br> Saveset Id: 311041000000000~200212042221590000~0~66AD4FB4129B4F36BA16D58406169F3 <br> Vault Id: 15DE4123YA375D511838800508B319C691110000vault.acme.com <br> Reference: [GOS]Failed to inform the Restoration Service that a requested Saveset is available. Reason: %1 Failed to inform the Restoration Service of unsuccessful attempt to make a Saveset available. Reason: %1 Storage Server Archive process (%1) terminated abnormally Storage Server Restore process (%1) terminated abnormally Storage Server FileWatch process terminated abnormally Storage Server ReplayIndex process terminated abnormally Error committing Archive MSMQ transaction Error aborting Archive MSMQ transaction Archive request has been aborted Error committing Restore MSMQ transaction

Error aborting Restore MSMQ transaction Restore request has been aborted Saveset file not found in the Vault Store Error adding Sensitivity attribute to indexable item Error adding Priority attribute to indexable item Error adding Security attribute to indexable item Error adding Identifier attribute to indexable item Error adding Date attribute to indexable item Error adding Language attribute to indexable item Error adding Recipient attribute to indexable item Failed to open saveset processing logfile %1 Size of MessageSetInfo buffer does not match size of CORRELATION_ID or MSG_ID properties This indicates a software development error. Unable to access the message rich text format content Reason: %1 Item: %2 Subject: %3 HTML Export DAInit() failed. Reason: %1 Error code: %2 HTML Export DADeInit() failed. Reason: %1 Error code: %2 HTML Export DAOpenDocument() failed. Reason: %1 Error code: %2 Source file type: %3 HTML Export EXOpenExport() failed. Reason: %1 Error code: %2 Source file type: %3 HTML Export DASetOption() failed. Reason: %1 Error code: %2 Source file type: %3 HTML Export EXRunExport() failed. Reason: %1 Error code: %2 Source file type: %3 HTML Export EXCloseExport() failed. Reason: %1 Error code: %2 Source file type: %3 HTML Export DACloseDocument() failed. Reason: %1 Error code: %2 Source file type: %3 Text Access TAOpenText() failed. Reason: %1 Error code: %2 Source file type: %3 Text Access DASetOption() failed. Reason: %1 Error code: %2 Source file type: %3 Text Access SaveToText() failed. Reason: %1 Error code: %2 Source file type: %3 Text Access TACloseText() failed. Reason: %1 Error code: %2 Source file type: %3 Text Access TACloseDocument() failed. Reason: %1 Error code: %2 Source file type: %3 Error creating Vault Store object %1 Error calling CoInitialize() %1 Error creating Directory Admin object %1 Error creating Directory Public object %1 Error creating Directory Vault object %1 Error creating Vault Store NTFS Volume Directory %1 Error creating Vault Store entry in Vault Directory %1 Error deleting partition NTFS Volume Directory '%2' %1 Error reading Vault Store entry in Vault Directory %1 Error reading Vault Status entry in Vault Directory %1 <br>e.g.<br> Error reading Vault Status entry in Vault Directory<br> The RPC server is unavailable. [0x800706ba]No entry for Vault in Vault Directory<br> Vault Id:<br> 1BD1B1AF49AD8D311ACEE00508B070AE51110000huyton.zko.dec.com <br> An attempt was made to read information for a Vault that does not have an entry in the Directory. This may indicate an inconsistency in the Vault DirectoryError deleting Vault Store entry in Vault Directory %1 Error storing Saveset as Vault is not available Error populating from an existing indexable item %1 Error querying an IIndexableItem for its IDispatch Interface %1 Error compressing or decompressing saveset data Insufficient memory Error compressing or decompressing saveset data Output buffer too small Error compressing saveset data Invalid compression level specified Error decompressing saveset data Corrupted input data Size of buffer for decompression will overflow Saveset is too large to store Error occurred when flushing file view %1 Error occurred when setting file pointer %1

Error occurred when setting end-of-file %1 Error occurred writing compressed saveset data to saveset file Check previous entries in Event Log The VaultStore %1 database was unsuccessfully created. Error getting Archive Queue for Vault Entry %2 %1 Error getting Restore Queue for Vault Entry %2 %1 Error getting Spool Queue for Retrieval Service Entry %2 %1 Error getting Number of Archive Processes for Storage Service Entry %2 %1 Error getting Number of Restore Processes for Storage Service Entry %2 %1 Error getting Number of Restore Threads for Storage Service Entry %2 %1 Error getting Number of Replay Processes for Storage Service Entry %2 %1 There was no such Storage Service Entry %1 in the Vault Directory There was no such Retrieval Service Entry %1 in the Vault Directory Error reading the Storage Service Entry serving Vault Entry %2 from the Vault Directory %1 Error reading the Retrieval Service Entry %2 serving the Spool queue from the Vault Directory %1 Error reading the Storage Service Entry %2 from the Vault Directory %1 <br>e.g.<br> Error reading the Storage Service Entry 1F9412SA111CA3A4184E92EF5C1EBFE9C1e10000vault.acme.com from the Vault Directory Access is denied [0x80070005] A NULL Vault Entry Id is not allowed A NULL Storage Service Entry Id is not allowed Error detected by %2 as it was passed an invalid parameter block. %1 Could not create an EnterpriseVault.DirectoryConnection object. %1 Error getting Restore Queue for Storage Service Entry %2 %1 Error getting Archive Queue for Storage Service Entry %2 %1 Error getting Service Entry Id for Storage Service Entry %1 Error setting table type in Storage Service Entry %1 Error setting table type in Retrieval Service Entry %1 Error updating the Storage Service Entry %2 with the Archive Queue name %1 Error updating the Retrieval Service Entry %2 with the Spool Queue name %1 Error updating the Storage Service Entry %2 with the Restore Queue name %1 Error reading Vault Store Entry from Vault Directory %1 Error reading Vault Store Entry value from Vault Directory %1 Error reading Vault Entry from Vault Directory %1 Error reading Vault Entry value from Vault Directory %1 Error building a security descriptor for queue %1 Error setting the Archive Queue %2 in Storage Service entry %1 Error setting the Restore Queue %2 in Storage Service entry %1 Error adding Data Type attribute to indexable item Error setting up the VaultUsage Database Object Error setting up the SavesetInformation Database Object for Archive Error setting up the JournalArchive Database Object for Archive Error setting up the JournalDelete Database Object for Archive Error setting up the WatchFile Database Object for Archive Error retrieving Saveset Filename from Vault Store Object Error Reading VaultUsage table Error reading SavesetInformation Error from StorageRestore: Error reading SavesetInformation SavesetID: %1 VaultID: %2 VaultStoreID: %3 <br>e.g.<br> Error from StorageRestore:<br> Error reading SavesetInformation<br> SavesetID: 111000000000000~200301230334000000~0~7E05C9441C664C7C97DB41695CB764F<br> VaultID: 1F701BDD1B125EF4AA74A0BD18CA0D46D1110000acme.com<br> VaultStoreID: 196667B5FEBDAD3119CAB00508B070AE51210000acme.comError from StorageRestore: Error removing storage objects after reading SavesetInformation SavesetID: %1 VaultID: %2 VaultStoreID: %3 Error from StorageRestore: Saveset entry not found in SavesetInformation table SavesetID: %1 VaultID: %2 VaultStoreID: %3 <br>e.g.<br> Error from StorageRestore:<br> Saveset entry not found in SavesetInformation table<Br> SavesetID: 412313000000000~200303230956500000~0~896076EB73A6418FBA64A62196F604B<br> VaultID: 541954128021F7346AC667DAFB5D4A08B1110000vault.acme.com<br> VaultStoreID: 192696B383B8AD4119CE200508B070AE51210000vault.acme.com <br>Error Creating JournalRestore table Error Updating JournalRestore table

Error Reading JournalRestore table Error Executing Saveset Database Transaction Fatal Error No Saveset matching %1 in Vault Error Saveset delete from Vault Store database failed Error loading Saveset %1 from Vault Store database Error setting up the SavesetInformation Database Object for Restore Error setting up the JournalRestore Database Object for Restore Error canceling archive or restore pending status on message %1 Error getting MSMQ machine properties %1 Error opening MSMQ Dead Letter Queue - Access is denied for queue %1 Using MSMQ Explorer, edit the permissions of the Computer on which the queue resides. Ensure that the local Administrators group has "Full Control" access. The computer properties to modify will be those of the system on which this error is logged. This can be verified by checking that the ID of the computer (displayed within the General tab of the Computer properties) corresponds with the queue name within this message. Error creating event object for Restore Spool Nack Handler %1 Error creating Restore Spool Nack Handler thread %1 MSMQ negative acknowledgment message(s) have been handled. Queue:%1 Reason: Destination queue can not be reached, the queue may have been deleted MSMQ negative acknowledgment message(s) have been handled. Queue:%1 Reason: The message was purged before reaching the destination queue MSMQ negative acknowledgment message(s) have been handled. Queue:%1 Reason: Time to reach queue has expired <br>e.g.<br> MSMQ negative acknowledgment message(s) have been handled. Queue:.\private$\Enterprise Vault Restore Spool Admin Queue Reason: Time to reach queue has expiredMSMQ negative acknowledgment message(s) have been handled. Queue:%1 Reason: The message has exceeded the queue quota MSMQ negative acknowledgment message(s) have been handled. Queue:%1 Reason: The sender does not have send access rights on the queue. <br>e.g.<br> MSMQ negative acknowledgment message(s) have been handled. Queue:.\private$\Enterprise Vault Archive Agent Admin Queue Reason: The sender does not have send access rights on the queue. MSMQ negative acknowledgment message(s) have been handled. Queue:%1 Reason: The message hop count exceeded MSMQ negative acknowledgment message(s) have been handled. Queue:%1 Reason: The message signature is bad. The message could not be authenticated. MSMQ negative acknowledgment message(s) have been handled. Queue:%1 Reason: The message could not be decrypted. MSMQ negative acknowledgment message(s) have been handled. Queue:%1 Reason: The message could not be encrypted for the destination. MSMQ negative acknowledgment message(s) have been handled. Queue:%1 Reason: The message was sent to a non-transactional queue within a transaction. MSMQ negative acknowledgment message(s) have been handled. Queue:%1 Reason: The message was sent to a transactional queue not within a transaction. MSMQ negative acknowledgment message(s) have been handled. Queue:%1 Reason: The queue was deleted, after the message has arrived MSMQ negative acknowledgment message(s) have been handled. Queue:%1 Reason: The message was purged at the destination queue <p>MSMQ negative acknowledgment message(s) have been handled. Queue:%1 Reason: Time to receive has expired, while the message is in the queue </p> <p>e.g.MSMQ negative acknowledgment message(s) have been handled.<br />Queue:.\private$\Enterprise Vault Restore Spool Admin Queue<br />Reason: Time to receive has expired, while the message is in the queue<br /></p>MSMQ Nack Message Handler for Archive Agent Admin Queue started MSMQ Nack Message Handler for Restore Agent Admin Queue started MSMQ Nack Message Handler for Restore Spool Admin Queue started MSMQ Nack Message Handler for Archive Agent Admin Queue stopped MSMQ Nack Message Handler for Restore Agent Admin Queue stopped MSMQ Nack Message Handler for Restore Spool Admin Queue stopped Failed to start StorageManage and/or StorageOnlineOpns Failed to stop StorageManage and/or StorageOnlineOpns File Watch %1 thread for partition "%2" started File Watch %1 thread for partition "%2" stopped File Watch %1 thread for partition "%2" failed Failed to initialize access to the Storage database. Reason: %1 This may be due to one of: - Failure to initialize MAPI - Failure to open the IPersistentStorageContext interface to the PersistentStorageContext Class COM component - Failure to open the IStorageDBObject interface to the StorageDBObject Class COM component Failure invoking OS routine: %1 Failed to connect to Vault Store Database for Vault Store "%1" Failed to initialize Error processing saveset %1 <br>e.g.<br> Error processing saveset E:\Enterprise Vault_Store\2003\03\21\11\311000000000000~200307261348120000~0.DVSError reading WatchFile entry for saveset %1 Error getting directory handle Reason: %1 Directory: %2 <br>e.g.<br> Error getting directory handle <br> Reason: The system cannot find the file specified. [0x80070002] <br> Directory: H:\Enterprise Vault Stores\Public Folders Error creating event handle Error returned from ReadDirectoryChangesW in wait thread for partition "KVS Part1"<p> A possible cause is that the partition is on a network drive <p> FileWatch will continue but there may be a delay in removing safety copies from mailboxes after the Vault Store has been backed up. Error returned from GetOverlappedResult Error beginning Vault synchronization %1

Error ending Vault synchronization %1 Failed to read the following registry key: %1 The Vault Site Account details could not be retrieved from the Directory Service. Failed to decrypt a password stored in the Vault Directory Client request refused due to insufficient privileges, user ACME\dowdp attempted to access the Vault with the VaultID 1BFE4E89DA0E20D4CB94E93982AFFCF921110000vault.acme.com but did not have DV_DS_PERM_READ accessAn unexpected timeout occurred while attempting to access a queued message. This may have occurred because a message was not on a queue as expected or because the system is heavily loaded, thus causing excessive MSMQ delays. If you suspect the problem is caused by MSMQ delays, try increasing the Enterprise Vault "QueueTimeout" registry value, as described in the "Modifying Registry Settings" section in the Troubleshooting section of the Administrator help. The value specified for "QueueTimeout" in the registry exceeds the maximum allowed value of %1 seconds. The timeout value in use has been reduced to this maximum. Failed to modify the Vault Store password in the Vault Directory and in SQL Server. Problem with value for %1 The value specified for "NackHandlerClearListInterval" in the registry exceeds the maximum allowed value of %1 seconds. The interval value in use has been reduced to this maximum. An incomplete saveset was removed from a queue. It is likely that there are some MSMQ problems that prevented messages being successfully placed on the queue. Check event log for additional errors The queue %1 is already open. It is likely that another process is running and will be processing the Nack messages placed on this queue. This Nack Handler will now terminate, as it is redundant. No additional action is necessary. An error occurred creating Nack Handler Clear Failed List thread %1 The Nack Handler Clear Failed List thread terminated unexpectedly Check previous errors in event log An error occurred creating a waitable timer object %1 An error occurred canceling a waitable timer object %1 An error occurred setting a waitable timer object %1 The Watch File process could not enumerate the Vault Stores served by Storage Service %2. %1 The Watch File process could not find the first result from the Vault Directory %1 The Watch File process is terminating as it has no work to do. There are no Vault Stores for Storage Service %1 The StorageFileWatch process for Storage Service %1 is exiting because there are no eligible Vault Stores. Vault Stores are ineligible if: - Remove safety copies from mailbox is 'Never' - Status is not 'Available' - Schema version is not supported The Watch File process could not read the details for a Vault Store. %1 The Watch File process could not decrypt the Vault Store password. %1 The Watch File process could not find the next Vault Store in the result list. %1 Registry value "%1" not found Registry key "%1" not found Registry key "%1" could not be created Registry value "%1" cannot be set An exception has occurred. [Internal reference %1] Failed to open an interface to a COM component Interface: %1 Error modifying Vault Usage record in storage database %1 Error adding the Storage Replay Queue name to the directory. %1 Error updating the Storage Service Entry with the Replay Queue name. %1 Example<br> Starting update of Vault Index with Storage transactions from 1 to 1419 <p> Vault: Elwood P. Dowd <br> Vault Id: <br> 1443908890DE8CB4EBA827EEAC6A448281110000huyton.zko.acme.com <br> Vault Store: Support FSA <br> Vault Store Id: <br> 1477079532F2AD1469D0738D09C78B4E81210000huyton.zko.acme.com <p> NOTE: Index additions will use the common index elements currently stored in the archived item.Re-indexing Vault. Example<br> Completed update of Vault Index with Storage transactions 13420 to 13450 <p> Vault: Elwood Dowd<br> Vault Id: 1331838A6A86ECD489B8B202FF17B65801110000acme.com<br> Vault Store: ZKO <br> Vault Store Id: 14962C1A68D4E4411838400508B319C691210000acme.com <br> Elapsed Time: 0:0:10 (hours:minutes:seconds)<br> Number of index additions replayed: 30<br> Number of index deletions replayed: 0<br>Re-index item with sequence number %1. Re-deleting item with sequence number %1. [Vault Id = %2] Error accessing Vault Store database. [Internal reference %1] %2 Index reconstruction abandoned. Error accessing Microsoft Message Queue. [Queue name = %1] [Internal reference %2] %3 Error accessing Vault Store. [Internal reference %1] <br> e.g. Error accessing Vault Store. [Internal reference OVS/svs] [VaultId = 12DA6123AS1C876488CE44CD74FBC0FF11110000vault.acme.com] Error accessing a Saveset file Reason: %1 Saveset Id: %2 Vault: %3 Vault Id: %4 Reference: %5 <br>e.g.<br> Error accessing a Saveset file Reason: EMC Centera C-Clip contains incorrect Saveset Pool Address: ClipId: Expected: VaultStoreId: VaultId: SavesetId: Received: VaultStoreId: VaultId: SavesetId: [0xc0041a6b] Saveset Id: 441441000000000~200402050749290000~0~3E07C297FC0E4ACB961D6F17D06FB30 Vault: Dowd Elwood Vault Id: 125RE7T5K395ED94FAC9B99FDA89A0AB41110000ACMEVAULT.COM Reference: VSOP Error updating an index. [Internal reference %1] <br>e.g.<br> Error updating an index.<br> [Internal reference GISN]<br> [VaultId = 5RDSA4KR70B16C74594C5AC9AEEBF1EB11110000ES2ACME.COM] %3 Vault Store error. Index reconstruction request has been ignored. No Vault Usage record was found for Vault. An index reconstruction request has been ignored. Vault Usage record indicates no replay request for Vault. Error attempting to use the Enterprise Vault directory [Internal reference %1] %2 The index for a Vault needs to be re-constructed. %1 missing additions or deletions on the index were detected. The current archiving operation has been abandoned. Lost index operations have been detected. The loss has been ignored, and is assumed to be the result of restoring an old database from backup. %1 missing index operations were detected. [Internal reference %3] <br>e.g.<br> Lost index operations have been detected.<br> The loss has been ignored, and is assumed to be the result of restoring an old database from backup.<br> 162 missing index operations were detected.<br> [VaultId = 23T65YH431F653841B1401266A4093F861110000acmevault]<br> [Internal reference CCUAU] Unable to initiate index re-construction. Failed to send request to StorageReplayIndex. %1

Error deleting Vault Store database. %1 A failure occurred attempting to delete completed JournalArchive records from a Vault Store database. Indexing Service Sequence number = %2 Vault Id = %3 Vault Store = %4 No action is necessary. The records will remain in the database until the next attempt to delete completed JournalArchive records. A failure occurred attempting to update JournalArchive records in a Vault Store database. Indexing Service Sequence number = %2 Vault Id = %3 Vault Store = %4 No action is necessary. The records will remain in the database until the next attempt to update JournalArchive records. A failure occurred attempting to delete completed JournalDelete records from a Vault Store database. Indexing Service Sequence number = %2 Vault Id = %3 Vault Store = %4 No action is necessary. The records will remain in the database until the next attempt to delete completed JournalDelete records. Error creating Global Interface Table. %1 The Indexing Service is not running or not available. %1 Document conversion timed out. Error from document conversion: Vault ID: %2 %3 %1 <br>e.g.<br> Error from document conversion: Vault ID: 125123243D2C94D4A9B8920E51C1019501110000acme.com Saveset Message for Mailbox /O=ACME/OU=ZKO/CN=RECIPIENTS/CN=DOWDEP, Message titled: Rabbits The parameter is incorrect. [0x80070057] Error occurred during content conversion of item titled: %1 Storage trace enabled. Detail level is: %1 Process Id is: %2 Module is: %3 Storage trace detail is set to an illegal value: %1 Queue security permissions do not include Vault site account. Queue: %1 Failed to inform the %2 Service of unsuccessful storage of a Saveset in a Vault Store. Reason: %1 Failed to find a Saveset entry in the Vault database [Vault Id: %1] [Saveset Id: %2] This may be an attempt to delete an archived item that has already been deleted or it may indicate a problem with the Vault database. A request was made to delete an archived item whilst the containing Vault was being re-indexed [Vault Id: %1] [Saveset Id: %2] The contents of a Vault cannot be updated whilst it is being re-indexed Invalid Saveset file. Error: %1 File: %2 If an HSM is being used check that it is running. <br>e.g.<br> Invalid Saveset file. <br> Error: Saveset decompression failed. Error: Context: [0xc0041aa7] <br> File: E:\Enterprise Vault Stores\IT\2004\02\10\10\341200000000000~200402101018030000~0.DVS <br> If an HSM is being used check that it is running. An exception has occurred. A StorageArchive SavesetReceive thread has aborted: %1 [Internal reference %2] <br>e.g.<br> An exception has occurred. <br> A StorageArchive SavesetReceive thread has aborted: Unspecified error [0x80004005] [Internal reference SARE]An exception has occurred. A StorageRestore SavesetRestore thread has aborted: %1 [Internal reference %2] An exception has occurred. A StorageFileWatch thread has aborted: %1 [Internal reference %2] <br>e.g.<br> An exception has occurred. A StorageFileWatch thread has aborted: Unspecified error [0x80004005] [Internal reference FWSE] Document conversion aborted - Service shutdown request detected: Vault ID: %1 Archive operation canceled because Saveset file is missing. [Vault Store: %1] [Vault ID: %2] [Saveset Filename: %3] [Transaction ID: %4] <br>e.g.<br> Archive operation canceled because Saveset file is missing.<br> [Vault Store: First Partition] <br> [Vault ID: 43T6Y5DEEB3CC0408395AABB97A970611110000ACMEVAULT]<br> [Saveset Filename: E:\Enterprise Vault Stores\ZKO\2003\04\18\00\313000000000000~200304180015030000~0.DVS] <br> [Transaction ID: 5921E4E294894B97BA52B4B70DB2266] Error deleting WatchFile database record for missing Saveset file [Partition: %1] [Vault ID: %2] [Saveset Filename: %3] [Transaction ID: %4] Storage Management started Storage Management restarted Storage Management stopped Storage Server Management process terminated abnormally Error starting Storage Management. %1 Error restarting Storage Management %1 Storage Server will be shutdown Error stopping Storage Management. %1 Storage OnlineOpns started Storage OnlineOpns restarted Storage OnlineOpns stopped Storage Server OnlineOpns process terminated abnormally Error starting Storage OnlineOpns. %1 Error restarting Storage OnLineOpns %1 Storage Server will be shutdown Error stopping Storage OnlineOpns. %1 Storage Restore was unable to recall or access file: %2 %1 <br>e.g.<br> Storage Restore was unable to recall or access file: F:\Enterprise Vault Stores\ACMESTORE1\2002\11\05\13\412310000000000~200211051300410000~0.DVS A device attached to the system is not functioning. [0x8007001f]The StorageRestore process (%1) has failed %2 times within the last %3 minutes, possibly because of a permanent problem Storage Restore process (%1) has aborted because of an unrecoverable error Failure waiting for system resource [Internal Reference %2] Reason:%1 Contact your support representative <br>e.g.<br> Failure waiting for system resource<br> [Internal Reference FWW] <br> Reason:The operation completed successfully. [0] <br> Contact your support representative Saveset file unavailable. Saveset Id: %1 Vault: %2 Vault Id: %3 <p>e.g.<br> Saveset file unavailable.<br> Saveset Id: 930000000000000~200303112451060000~0~31A94F30354D4EEDB886E577DDEFBD4 <br> Vault: Elwood P Dowd <br> Vault Id: 1F9C2C53C39777349B20EEFF4387D6BC11110000acme.com <br>Failed to open Queue: %2 Queue FormatName: %3 %1<br>e.g.<br> Failed to open Queue: Enterprise Vault Storage Archive Queue Queue FormatName: PRIVATE=91b6a6e2-5d35-4834-8917-e7d986e0fc29\00000010 Unable to establish a connection with Active Directory. Verify there are sufficient permissions to perform this operation. [0xc00e0013] Index reconstruction abandoned. Error accessing Microsoft Message Queue. [Queue Format Name = %2] [Internal reference %3] %4 Unhandled document conversion exception Login name or domain name too long A Directory operation has failed Error creating a Directory object Error creating a VaultStore object

Error creating an ArchiveStore object A database operation has failed. Check your SQL Server Account and password AVS SDK avs_convert_file2text() failed. Reason: %1 Error code: %2 Source file type: %3 AVS SDK avs_convert_file2html() failed. Reason: %1 Error code: %2 Source file type: %3 AVS SDK document converters successfully initialized. Converter pathname used is: %1 Saveset file does not contain required information Reason: %1 Saveset Id: %2 Vault Id: %3 Internal reference: %4 Failed to set the flag in the Vault Directory that prevents the Storage Service from being deleted. %1 The entry was not found in the cache An error occurred whilst getting an item from the cache An error occurred whilst adding an item to the cache Error reading the Computer Entry %1 e.g.<br> Unable to monitor the status of MSMQ queue <br> Reason: Access is denied. [0x80070005] <br> Queue: {Servername}\Private$\Enterprise Vault Storage ArchiveINSO HTML Export converters configured to use Hebrew character set INSO Text Access converters configured to use Hebrew character set The name used to create a message register is invalid An exception occurred during access to the Archive current message register No free slots in the Archive current message register The given Archive current message identity is already in the register Failed to create lock for message register Lock Name: %1 Failed to lock message register object Message Register: %1 Method Id: %2 Failed to unlock message register object Message Register: %1 Failed to initialize the Archive current message register memory mapping Failed to read the Archive current message register Registry values The given Archive current message identity is too long The Storage Service is shutting down due to a persistent error in one of the service's components. Component: %1 Check previous entries in the error log and restart the storage service after the problem has been identified and corrected Item content will not be indexed. Message Id: %1 Label: %2 Previous attempts to archive the item have failed or been interrupted. This item will be archived without a preview being available to the web application and the content will not be indexed. It is not possible to search on the content but the item can be restored as normal Item archive abandoning Message Id: %1 Label: %2 All previous attempts to archive the item have failed or been interrupted. To prevent further failures the item will not be archived. It is probable that the item will remain as 'pending archive' in the user's mailbox. <br>e.g.<br> Item archive abandoning <br> Message Id: {484HFDSY-743B-4410-8D1C-JF6064709ABE}\9543830 <br> Label: Saveset Message for Mailbox /o=ACME/ou=Messaging Administrative Group/cn=Recipients/cn=DowdP, Message titled: MessageTitle <br> All previous attempts to archive the item have failed or been interrupted. To prevent further failures the item will not be archived. It is probable that the item will remain as 'pending archive' in the user's mailbox. The Storage Archive feature used to handle repeated archive failures of an item has been disabled. The Poison Pill object is already owned by another thread The Poison Pill object is not owned by the current thread The Poison Pill object is owned by the current thread Processing of the current item appears to be hung. The process will be stopped. Storage Deletion Server started Storage Deletion Server stopped Storage Deletion Server start failure Storage Server Delete process terminated abnormally Abnormal error occurred Reason: %1 Vault: %2 Vault Id: %3 Reference: %4 Supplementary Info: %5 %6 Error processing Saveset Identifier. [Internal reference %1] %2 Error processing Vault Store Volume. [Internal reference %1] %2 Vault Store Database error. The ReadVaultUsage method returned an error. VaultId: %1 [Internal reference %2] Abnormal error occurred Object: %1 Reference: %2 <br>e.g.<br> Abnormal error occurred<br> Object: CVaultStatusCache<br> Reference: C/ICEP<br> Unknown Vault insert context cookie The Archive is currently unavailable. Archive Name: %1 Vault Id: %2 Reference: %3 Possible reasons include the Archive's index is being updated, the Archive is reserved exclusively for bulk archiving (such as PST migration) or the Archive is being deleted Vault insert context is locked Abnormal error occurred VaultId: %1 Reference: %2 The process should be restarted to ensure optimal performance Unable to access the Directory service. Unable to refresh Vault configuration details from the Directory Vault Id: %1 Operation is continuing using cached configuration details

Unable to set Vault status to unavailable in the Directory Vault Id: %1 Operation is continuing though some applications, such as the web application, may seem to allow access to the Vault. However actions such as attempting to delete items from the Vault will fail because the Vault is not currently available Item cannot be archived. Several attempts to archive the item have failed or been interrupted. To prevent further failures the item should not be presented for archival again. Vault Store database operation requires current Vault to be set. [Internal reference %1] <br>e.g.<br> Vault Store database operation requires current Vault to be set. [Internal reference VSDBGVUV4] Error synchronizing access to Vault Store database. [Internal reference %1] %2 Migrator Server started Migrator Server stopped Abnormal error occurred VaultId: %1 Reference: %2 Abnormal error occurred PST file: %1 Archive Name: %2 Vault Id: %3 Reference: %4 Migration has been stopped PST Migration Report Migration status: %1 PST file: %2 Archive Name: %3 Vault Id: %4 Number of folders processed: %5 Number of items archived: %6 Total size of items archived: %7 KB Number of items unable to be archived: %8 Start Time: %9 End Time: %10 Unexpected MAPI error encountered Error: %1 Component: %2 Reference: %3<br>e.g.<br> Error: The file D:\user1.pst is not compatible with this version of the Personal Folders information service. Contact your administrator. <br> Component: Personal Folders <br> Reference: CPSTHelper::ConfigurePST/CMS1 You do not have the correct license to run the PST Migration Service. Either your license has expired or you do not have a license. If you want to use the PST Migration Service, please contact your license supplier. The Deletion process could not enumerate the Vault Stores served by Storage Service %2. %1 The Deletion process could not find the first result from the Vault Directory %1 The Deletion process could not read the details for a Vault Store. %1 The Deletion process could not find the next Vault Store in the result list. %1 An exception has occurred. A StorageDelete process has aborted: %1 [Internal reference %2] <br>e.g.<br> An exception has occurred. A StorageDelete process has aborted: Unspecified error [0x80004005] [Internal reference EXPME]Storage Expiry will not be started because there are no Vault Stores managed by Storage Service %1 e.g.<br> Storage Expiry Report <p> Vault Store Name: Vault Store 5 <br> Vault Store Id: 108059CA5FF8E724187568F7C863FCA6F1210000acme.kvsvault.com <p> Number of vaults processed: 7 <br> Number of vaults enabled for expiry: 7 <br> Total number of expired items deleted: 0 <br> <p> Items were deleted with the following retention categories: (none) <p> No items were deleted with the following retention categories: <br> PST (119988 months). Miscellaneous (12 months). Public (119988 months). Business (119988 months). Uncategorized (9999 years). Sent Items (119988 months). Deleted Items (3 months). Personal (60 months). <p> Expiry based on archived date <p> Start Time: 15/02/2004 12:00 <br> End Time: 15/02/2004 12:00Failed to process all expired items in Vault. %1 Vault Name: %2 Vault Id: %3 <br>e.g.<br> Failed to process all expired items in Vault. <br> Error Could not delete a saveset [0xc004188b]<br> Vault Name: Elwood P Dowd <br> Vault Id: 54DJ4431Q37022E458AD5452578FA566D1110000zko.acme.com Failed to process all expired items in Vault Store. %1 Vault Store Name: %2 Vault Store Id: %3 <br>e.g.<br> Failed to process all expired items in Vault Store. Unable to Create Connection [0xc004340e] Vault Store Name: ACMEStore Vault Store Id: 56RTJ34MS2F1FE649915862E2B4C9390B1210000vault.acme.comFailed to set dates for expiry date range. Storage Expiry is not enabled PST file access error occurred PST file: %1 Account: %2 Reference: %3 <br>e.g.<br> PST file access error occurred <br> PST file: E:\DOWDP_2002.pst <br> Account: ACME\VAULT <br> Reference: SUP/CFE <br> Could not read Storage Expiry details from the Site Entry table Site EntryID: %1 Storage Expiry was stopped before it had completed Vault Store Name: %1 Vault Store Id: %2 Storage Expiry stopped because all remaining Vaults are being compacted or replayed Vault Store Name: %1 Vault Store Id: %2 The remaining Vaults will be processed when Storage Expiry next runs Storage Expiry Report (Report Mode) Vault Store Name: %1 Vault Store Id: %2 Number of vaults processed: %3 Number of vaults enabled for expiry: %4 Total number of expired items: %5 Items have expired with the following retention categories: %10 No items have expired with the following retention categories: %11 Expiry based on %12 Start Time: %6 %7 End Time: %8 %9 Vault Store database Scan Watch File mode incorrect. [Internal reference %1] Vault Store database Process Watch File records. [Internal reference %1] Vault Store database Read SavesetInformation record. [Internal reference %1] The Vault Store schema update script failed. [Internal reference %1] Estimation of Vault Store schema conversion time failed. [Internal reference %1] Vault Store database for Scan Replay Vaults failed. [Internal reference %1] Vault Store database for Scan Replay Items failed. [Internal reference %1] An exception has occurred. Type: %2 Reference: %3 Reason: %1 <br>e.g.<br> An exception has occurred. <br> Type: ce <br> Reference: VSEMCC/CCSOS1 <br> Reason: The system cannot find the path specified. [0x80070003] <br> A Conversion is already in progress Unknown conversion cookie supplied Conversion failed Converters not loaded INSO conversion error Reference: %1 INSO error: %2 Unable to convert item as there is no converter available for the document type Conversion canceled This is an example. Some details will be different<br> Unable to convert item content <p> Reason: Unspecified error [0x80004005] <br> Supplementary Info: Unknown converter error (0) <p> Item: Saveset Message for Mailbox /O=ACME/OU=ZKO/CN=RECIPIENTS/CN=DOWDP, Message titled: Invoice Subject: Invoices <br> Attachment: invoice1.pdf<br> Type: pdf <br> This item will be archived without a preview being available to the web application and the content will not be indexed. It is not possible to search on the content but the item can be restored as normal**This is an example. Some details may be different**<p> Unable to convert item content to HTML. The content has been converted to text<p> Reason: The requested allocation size was too large [0x80080011] Supplementary Info: <p> Item: SA:FSA-7C02A898D9FCBE26F617C3C20429F7A7--1751237826 Subject: hlog.zip <br> Attachment: <br> Type: zip <br> <p> The content of this item failed conversion to HTML but has been successfully converted to text. The item will be archived normally but the preview available in the web application will be text rather than HTMLStorage Archive is not enabled Storage File Watch is not enabled Storage Replay Index is not enabled

Storage Restore is not enabled Corrupt Storage Archive MSMQ queue entry discarded. Message Id: %1 Label: %2 Buffer for uncompressed data: %3 bytes Compressed data size: %4 bytes To prevent further failures the item will not be archived. It is probable that the item will remain as 'pending archive' in the user's mailbox. The target archive/folder is unavailable. Please check the event log and try again later Unspecified error. Please check the event log Unable to set the Vault Store database to single-user mode. Unable to set the Vault Store database to multi-user mode. Error opening Vault Store database '%1' because schema version '%2' is not supported. [Internal reference %3] Storage Service is not running Storage Service Id %1 The entry record for Archive to be deleted could not be found Vault Id %1 Delete Vault failed Reason: %1 Vault Name: %2 Vault Store: %4 Vault Id: %3 <br>e.g.<br> Delete Vault failed <br> Reason: Access is denied. [0x80070005] <br> Vault Name: Elwood Dowd Vault Store: Main Store Vault Id: 1REFASDFASD48DA46B6419F7163BA80C31110000vault.acme.comThe entry record for Vault Store to be deleted could not be found Vault Id %1 The Vault Store is currently unavailable. VaultStore: %1 Possible reasons include the Vault Store is being deleted Failed to delete Vault Store '%2' Vault Store Id : %3 Internal references: Error : %1 Reference : %4 e.g.<br> Update of Vault Index completed processing Storage transactions from 28898 to 38898. Continuing... <br> Vault: Elwood Dowd <Br> Vault Id: 12T63123FEBDAD3119CAB00508B070AE51110000vault.acme.com <br> Vault Store: Production <br> Vault Store Id: 114TRG6WFEBDAD3119CAB00508B070AE51210000vault.acme.comFailed to add an item to the deletion queue Reason: %1 Item Name: %2 Item EntryId: %3 Failed to get next item from the deletion queue Reason: %1 Error processing the deletion queue Reason: %1 Storage Deletion Server has failed Reason: %1 <br>e.g.<br> Storage Deletion Server has failed <br> Reason: Catastrophic failure [0x8000ffff] Archive has been deleted Archive Name: %1 Vault Store: %3 Archive Id: %2 <br>e.g.<br> Archive has been deleted <p> Archive Name: Dowd, Elwood <br> Vault Store: ACMESTORE1 <br> Archive Id: 5R412WQGT6CABC6408992087E9929AC071110000Evault.acme.com Error building the deletion queue Reason: %1 %1 (%2) - Restarting failed process PID: %3 Exit Code: %4 The process has failed abnormally and will be restarted automatically <p> e.g.<br> Storage Archive Server (3) - Restarting failed process <p> The process has failed abnormally and will be restarted automatically %1 (%2) - Process failed PID: %3 Exit Code: %4 The process has failed abnormally and will not be restarted. Either the process has exceeded its restart count or automatic restart is disabled. The process can be restarted by stopping and restarting the Storage Service <br>For example:<br> Storage Archive Server (6) - Process failed <br> PID: 0 <br> Exit Code: Unspecified error [0x80004005] <br> <br> The process has failed abnormally and will not be restarted. Either the process has exceeded its restart count or automatic restart is disabled. The process can be restarted by stopping and restarting the Storage Service Error starting process Reason: %1 Process: %2 (%3) Reference: %4 <br>e.g.<br> Error starting process <br> Reason: The server process could not be started because the configured identity is incorrect. Check the username and password. [0x8000401a] <br> Process: Storage Archive Server (6) <br> Reference: RunTheProcess/CCI <br> Error stopping process Reason: %1 Process: %2 (%3) Reference: %4 Error stopping process Reason: %1 Process: %2 (%3) Reference: %4 %1 (%2) - Terminating process PID: %3 The process has failed to shutdown normally and is being terminated %1 (%2) - Terminating process PID: %3 The process has is being terminated because it has nothing to do Vault Store has been deleted Vault Store Name: %1 Vault Store Id: %2 File I/O Function error: Reason: %1 Path: %2 Reference: %3 <p>e.g.<br> File I/O Function error: Reason: There is not enough space on the disk. [0x80070070] Path: E:\Enterprise Vault Stores\Journal\2003\03\21\09\313000000000000~200304233114110000~0.DVS Reference: VSIS5 A request was made to delete an archived item, but the containing Vault needs to be re-indexed first. The deletion has not been performed. Abnormal error occurred within the EV Converter Sandbox Proxy/Stub Name: %1 Reference: %2/%3 The Vault Store contains one or more Archives which are currently unavailable. VaultStore: %1 Possible reasons include the Archive's index is being updated or the Archive is reserved exclusively for bulk archiving (such as PST migration). Failed to register Reason: %1 Registry value: %2 Module: %3 The Vault Store could not be completely deleted because its database was in use. Vault Store Name: %1 Vault Store Id: %2 The operation will be retried when the Storage Service is next started. Saveset sharing error occurred Reason: %1 File: %2 Reference: %3 The Storage Service "Can Delete" flag could not be set Vault Store Name: %1 Vault Store Id: %2 Saveset sharing error occurred Reason: %1 VaultId: %2 TransactionId : %3 Reference: %4 Problem saving Saveset to Vault Store file Reason: %1 Saveset File: %2 Conversion not possible The Directory Service is unavailable. Please try again later Error occurred issuing job progress update. Reason: %1 Reference: %2 Migration will continue but further job progress updates for the current PST may not be possible. Job progress updates will be re-established upon processing the next PST. Cannot run Storage Expiry now as it is already running Error executing Storage Expiry Run Now request Reason %1 Unable to access the Directory Service on %1 Check that the Directory Service is running. The process will automatically continue normal operation as soon as the Directory Service becomes available. Unable to access Indexing Service on %1 Check that the Indexing Service is running. The process will automatically continue normal operation as soon as the Indexing Service becomes available. <br>e.g.<br>Unable to access Indexing Service on acmevault.acme.com <br> Check that the Indexing Service is running. The process will automatically continue normal operation as soon as the Indexing Service becomes available. Unable to access the Directory Service on %1 Check that the Directory Service is running. Unable to access the Indexing Service on %1 Check that the Indexing Service is running. %1 (%2) - Process stopped PID: %3 Exit Code: %4 The process has stopped due to an unrecoverable error and will not be restarted. Check the event log for previous errors. Once the problem has been resolved the process can be restarted by stopping and restarting the Storage Service

Error compacting PST file PST file: %1 Reference: %2 PST migration has been successfully completed but compaction failed. If you need to compact this PST file, use Outlook. There was an error with the Storage Expiry search dates Search date: %1 %2 Verification date: %3 %4 Storage Expiry will resume at the next scheduled period An error occurred calculating an item's expiry date An error occurred getting the computer root path from the directory %1 Class not initialized %1 Error initializing class %1 Exception in routine %1 Error creating Storage Expiry audit log file %2 %1 Error writing to Storage Expiry audit log file %2 %1 Error creating security descriptor for Storage Expiry audit log file %1 Failed to read the Alternate computer name for Computer Entry Id : %1 Failed to read the Alternate computer name for the Retrieval Service : %1 Vault Store volume path must contain at least one directory below the device or share point Failed to read the Message Classes from the Directory Exchange Server mailbox access error occurred Exchange Server: %1 Exchange Privileged Mailbox: %2 Mailbox DN: %3 Reference: %4 <br>e.g.<br> Exchange Server mailbox access error occurred <br> Exchange Server: ACMEEXCH1 <br> Exchange Privileged Mailbox: EnterpriseVault-ACMEEXCH1 <br> Mailbox DN: /o=ACME/ou=REO /cn=Recipients/cn=Dowdp <br> Reference: OMMS/GMSFP <br> An error occurred while moving items from the PST file to the designated Exchange Server mailbox folder PST file: %1 Exchange Server: %2 Mailbox DN: %3 Mailbox Folder: %4 Reference: %5 <br>e.g.<br> An error occurred while moving items from the PST file to the designated Exchange Server mailbox folder<br> PST file: E:\DOWDP_2002.PST <br> Exchange Server: ACMEEX1 <br> Mailbox DN: /O=ACME/OU=REO/CN=RECIPIENTS/CN=DOWDP<br> Mailbox Folder: Recruitment<br> Reference: MCM/GCT <br> Failed to start a new Storage FileWatch thread to watch the new Vault Store. Reason: %1 The Storage Service will need to be restarted in order for FileWatch to start watching this Vault Store. Failed to start a new Storage Expiry thread to process the new Vault Store. Reason: %1 The Storage Service will need to be restarted in order it to begin expiring items in this Vault Store. Problem reading field from Directory entry Reason: %1 Field: %2 Entry ID: %3 Migrator Server initialization failure Abnormal error occurred Process Set: %1 Reference: %2 Additional Info: %3 Abnormal error occurred Process Set: %1 Process: %2 Reference: %3 Additional Info: %4 Migration has been stopped because the Storage Service is stopping. User stopped migration Storage Service shutdown The database for Vault Store '%1' has an unsupported schema version of '%2'. The Storage Service will not be started because one or more Vault Stores with unsupported database schemas have been detected. See previous events. FileWatch wait thread for partition "%1" has failed FileWatch will continue but there may be a delay in removing safety copies from mailboxes after the partition has been backed up. PST Migration Report Migration status: %1 PST file: %2 Archive Name: %3 Vault Id: %4 Exchange Server\Mailbox: %5 Number of folders processed: %6 Number of items archived: %7 Total size of items archived: %8 KB Number of items unable to be archived: %9 Number of items moved to mailbox: %10 Start Time: %11 End Time: %12 Error reading Storage Service Entry in Vault Directory %1 Error reading Storage Service Entry value from Vault Directory %1 Error reading Site Entry in Vault Directory %1 Error reading Site Entry value from Vault Directory %1 Error updating Vault Entry table Error: [Internal reference %2] Error creating partition volume directory Reason: %1 Path: %2 Reference: %3 Error creating partition volume directory with security attributes Reason: %1 Path: %2 Reference: %3 Error setting security attribute on partition volume directory Reason: %1 Path: %2 Reference: %3 Archive operation canceled because Saveset file does not contain per-user information. [Vault Store: %1] [Vault ID: %2] [Saveset Filename: %3] [Transaction ID: %4] FileWatch scan thread for partition '%2' cannot access the root path directory '%3'. FileWatch will wait for the rescan interval and try again. Error: %1 Insufficient mailbox quota available. Please check the event log Starting Index Update with Storage transactions from 1 to 4810 <BR> Vault: Elwood Dowd<BR> Vault Id: 41HQEI812F653841B1401266A4093F861110000vault.acme.com <BR> Vault Store: Sales <BR> Vault Store Id: 125URQ123JB8AD4119CE200508B070AE51210000vault.acme.com <BR> Completed update of Vault Index with Storage transactions 1 to 4810 <BR> Vault: Elwood Dowd<BR> Vault Id: 1C61C1F20FF653841B1401266A4093F861110000vault.acme.com<br> Vault Store: Sales <br> Vault Store Id: 192696B383B8AD4119CE200508B070AE51210000vault.acme.com<br> Elapsed Time: 0:12:18 <br> Number of index additions replayed: 4810<br> Number of index deletions replayed: 0 Update of Vault Index with Storage transactions %5 to %6 suspended whilst processing transaction number %7 Vault: %2 Vault Id: %1 Vault Store: %3 Vault Store Id: %4 Elapsed Time: %8 (hours:minutes:seconds) Number of index additions replayed: %9 Number of index deletions replayed: %10 NOTE: The total number of index additions and deletions replayed may be less than the number of transactions processed. This is because the index update process is optimized so that index additions are not replayed for items that are known to have been fully deleted from the Vault. Number of archived items with an old version of the common index elements: %11 Number of archived items updated with the latest version of the common index elements: %12 NOTE: Index additions were performed using the latest version of the common index elements stored in the archived item. Where necessary the archived item was updated with the latest version of the common index elements. Update of Vault Index with Storage transactions from %5 to %6 suspended whilst processing transaction number %7 Vault: %2 Vault Id: %1 Vault Store: %3 Vault Store Id: %4 Elapsed Time: %8 (hours:minutes:seconds) Number of index additions replayed: %9 Number of index deletions replayed: %10 Unable to update the common index elements of the archived item. Reason: %1 Saveset Id: %2 Vault: %3 Vault Id: %4 Vault Store: %5 Vault Store Id: %6 NOTE: The archived item could not be updated with the latest version of the common index elements. The old version still exists in the item and will be used for the current index update process. <p>Abnormal error occurred Error: %1 Reference: %2 Info: %3 %4 %5 </p> <p>e.g.</p><font size="1"> <p><font size="3">Abnormal error occurred</font></p> <p><font size="3">Error: Cannot create a file when that file already exists. [0x800700b7]</font></p> <p><font size="3">Reference: CMC/ce</font></p> <p><font size="3">Info: CItemFetcher::FetchIndexMetadata</font></p> <p></p> <p></p></font>Cache Statistics Report Process Id: %1 Executable: %2 Cache Name: %3 Maximum Entries: %4 Entry Expiry Timeout: %5 (seconds) Number of Entries: %6 Elapsed: %7 (hours:minutes:seconds) Hits: %8 Misses: %9 Expiries: %10 Evictions: %11 Unable to determine the Catalogue state Reason: %1 Computer: %2 CatalogueId: %3

Catalogue Entry not found in Vault Directory EntryId: %1 The Public Folder Catalogue Conversion failed. Reason: %1 The Public Folder Catalogue Conversion SQL script failed. [Internal reference %1] The PST file has not been marked for migration. The VaultId identifier value is not found on the PST filter message. The Retention Category value is not found on the PST filter message. Invalid vault for archiving. Vault Id: %1 Reference: %2 Index Update not required as the index is up to date Vault: %1 Vault Id: %2 Vault Store: %3 Vault Store Id: %4 Last Transaction: %5 Catalogue is not up to date and requires replay Vault: %1 Vault Id: %2 Vault Store: %3 Vault Store Id: %4 Last Transaction: %5 <br>e.g.<br> Catalogue is not up to date and requires replay <Br> Vault: Elwood Dowd <br> Vault Id: 41231EWQ18C42C046AE3A767A5700FC641110000acme.com<Br> Vault Store: Sales <br> Vault Store Id: 4123RQ7453B8AD4119CE200508B070AE51210000acme.com<br> Last Transaction: 0 <br> Restarting update of Vault Index with Storage transactions from %1 to %2 Vault: %4 Vault Id: %3 Vault Store: %5 Vault Store Id: %6 NOTE: Index additions will use the common index elements currently stored in the archived item. Restarting Index Update with Storage transactions from 191673 to 241532 <br> Vault: Elwood Dowd<br> Vault Id: 41URGQ09FEBDAD3119CAB00508B070AE51110000vault.acme.com <br> Vault Store: Production <br> Vault Store Id: 210RE6Q3FEBDAD3119CAB00508B070AE51210000vault.acme.com PST Migration Report Migration status: %1 PST file: %2 Archive Name: %3 Vault Id: %4 RetentionCategory: %5 Number of folders processed: %6 Number of items archived: %7 Total size of items archived: %8 KB Number of items unable to be archived: %9 Elapsed Migration Time: %10 (hours:minutes:seconds) Example <p>PST Migration Report </p> <p>Migration status: Completed </p> <p>PST file: d:migrationsdowdp.pst <br />Archive Name: Elwood Dowd <br />Vault Id: 5F65JKE3T29DC114B96E02C9692488B0C1110000acme.com<br />RetentionCategory: Default <br />Exchange ServerMailbox: ACMEEXCH1Elwood Dowd </p> <p>Number of folders processed: 148 <br />Number of items archived: 11165 <br />Total size of items archived: 1372488 KB</p> <p>Number of items unable to be archived: 0 <br />Number of items moved to mailbox: 11428 </p> <p>Elapsed Migration Time: 2:27:20 (hours:minutes:seconds) </p>Could not delete the saveset because the retention category associated with it does not allow deletions. Error reading the associated mailbox details from the Vault Directory Vault ID: %1 A possible cause is that there is no associated mailbox for this vault. Addition of item to catalogue abandoned <br> Catalogue: Journal 2004 <br> Catalogue Id: 643FB28D8F422214786182DA3AA60FF161110000vault.acme.com <br> Saveset Id: 123000000000000~200307543135410000~0~65F4F78AF7B043E0BF9DEC8BF46EE38 <br> Transaction: 10831 <br> All previous attempts to add the item to the catalogue have failed or been interrupted. To prevent further failures the item will not be indexed.Deletion of item from catalogue abandoned Catalogue: %1 Catalogue Id: %2 Saveset Id: %3 Transaction: %4 All previous attempts to remove the item from the catalogue have failed or been interrupted. To prevent further failures the item will be left in the catalogue. Could not determine the default system codepage. To migrate all messages, regardless of their native language, set the following DWORD registry key to the value "2" and retry the migration: HKLM\Software\KVS\Enterprise Vault\Agents\CodepageProcessing The vault %1 cannot be deleted at this time. The Vault Store %1 cannot be deleted a this time. An abnormal error occurred during disconnection of the Vault Store database. Vault Store id: %1 [Internal reference %2] Failed to connect to Vault Store Database for Vault Store "%1" Error: %2 [Internal reference %3] UpdateSQLServer: Failed to connect to Vault Store Database for Vault Store UpdateSQLServer: Could not connect to SQL Server: %1 UpdateSQLServer: Could not connect to database %1 on SQL Server: %2 UpdateSQLServer: Failed to Get information from the Directory for the VaultStoreEntry: %1 Error reading Retention Category entry from Vault Directory %1 Error loading or freeing EMC Centera FPLibrary.Dll Reason: %1 <br>e.g.<br> Error loading or freeing EMC Centera FPLibrary.Dll Reason: A dynamic link library (DLL) initialization routine failed. [0x8007045a]Error getting function address from EMC Centera FPLibrary.Dll Reason: %1 Function: %2 Error connecting to EMC Centera Function call: %1 Status: %2 (%3) Reason: %4 <br />e.g.<br />Error connecting to EMC Centera <br />Function call: Status: (-10215) Reason: %4Error from EMC Centera FPLibrary Function call: %1 Status: %2 (%3) Reason: %4 Pool Address: %5 <br>e.g.<br> Error from EMC Centera FPLibrary <br> Function call: HPPPacket.checkControlStatus: FP_SERVER_ERR (-10005) <br> Reason: The server reported an error from the operation (transid='bos-330-03/135/DELETE_CLIP') <br> Pool Address: 141.14.23.11,141.14.23.12 <br> Error opening EMC Centera C-Clip Function call: %1 Status: %2 (%3) Reason: %4 Pool Address: %5 <br>e.g.<br> Error opening EMC Centera C-Clip Function call: NetworkPacket.checkControl(2){HPPReadBlobTransaction.readBytes(HPPImportData&){HPPReadBlobTransaction.run(){ClusterCloud::readBlob(FPBasicGenericStream*,D4121FDA319ACe22ACME,,0,-1,-1,0){FPClip.Open(D4121FDA319ACe22ACME,1){FPClip_Open(-,FVF4VEEA319ACe22M8KSP0ACME,1) Status: FP_CLIP_NOT_FOUND_ERR (-10021) Reason: Clip CDF is not found in the pool (transid='ACMEVAULT01/931/READ_CLIP') Pool Address: 10.169.3.115,10.169.3.116,10.169.3.117,10.169.3.118 EMC Centera C-Clip has incorrect name Pool Address: %1 ClipId: %2 Expected: %3 Received: %4 EMC Centera C-Clip contains incorrect Saveset Pool Address: %1 ClipId: %2 Expected: VaultStoreId: %3 VaultId: %4 SavesetId: %5 Received: VaultStoreId: %6 VaultId: %7 SavesetId: %8 <br>e.g.<br> EMC Centera C-Clip contains incorrect Saveset <br> Pool Address: 10.28.0.11,10.28.0.12,10.28.0.13,10.48.0.14 <br> ClipId: 543rt642IULOHeAFGKEQCSHP7OC <br> Expected: <br> VaultStoreId: 54RG67UIFF82E2F409375B900DEE0EB0A1210000ACMEVAULT <br> VaultId: 554FG6E37395ED94FAC9B99FDA89A0AB41110000ACMEVAULT<br> SavesetId: 219000000000000~200302040749290000~0~T5R43297FC0E4ACB961D6F17D06FB30 <br> Received: <br> VaultStoreId: 54RG67UIFF82E2F409375B900DEE0EB0A1210000ACMEVAULT <br> VaultId: &#53588;ñ&#7924;&#27075;&#53356;ñ&#27056;&#406; <br> SavesetId: 219000000000000~200302040749290000~0~T5R43297FC0E4ACB961D6F17D06FB30 <br> Could not execute Saveset database transaction Reason: %1 Saveset Id: %2 Transaction: %3 Reference: %4 <br />e.g.<br />Could not execute Saveset database transaction <br />Reason: The Vault is busy [0xc0041800] <br />Saveset Id: 432193400000000~200305232028550000~0~FF31EDE40FF44FBBBDEDA6467BC19E5 <br />Transaction: FF31EDE40FF44FBBBDEDA6467BC19E5 <br />Reference:FileWatch scan thread for partition "%1" cannot connect to EMC Centera Replica system FileWatch will wait for the rescan interval and try again. Invalid Vault Store Device Type Device Type: %1 Vault Store Id: %2 Replay Index operations have been requested for Vaults in the "%1" Vault Store so that the setting of Retention Category information can be completed. The Storage Service should be restarted and the Schema upgrade run again. Export Archive Report Export status: %1 Job Id: %2 Vault Name: %3 Vault Id: %4 Target Exchange Server\Mailbox: %5 Number of items restored: %6 Number of items unable to be restored: %7 Age range filter: %8 Retention category filter: %9 Elapsed Export Time: %10 (hours:minutes:seconds) <br>e.g.<br> Export Archive Report <BR> Export status: Completed <BR> Job Id: Exp1_20040621132529 <BR> Vault Name: Dowd, Elwood <BR> Vault Id: 14RT65322AD4FB4EA842C4106A2DA8401110000vault.acme.com<br> Target Exchange Server\Mailbox: ACMEEXCH1\Dowd, Elwood <br> Number of items restored: 321<br> Number of items unable to be restored: 2<br> Age range filter: (None) Retention category filter: (None) Elapsed Export Time: 00:04:18 (hours:minutes:seconds) <br>e.g.<br> Export Archive Report <br> Export status: Incomplete <br> Processing aborted due to an unrecoverable error. <br> Job Id: Exp3_20041414431943 <br> Archive Name: Dowd, Elwood<br> Vault Id: 5UTRLEW061FE5424A863424CFE79589991110000acme.com <br> Target PST file location: D:\PST Export\Dowd,Elwood_Export_0001.pst <br> Number of PST files: 1 <br> Number of items restored: 0 <br> Number of items unable to be restored: 1<br> Age range filter: <None> <br> Retention category filter: <None> <br> Elapsed Export Time: 00:00:05 (hours:minutes:seconds) Export Archive has been stopped because the Storage Service is stopping. Export Archive has been stopped User stopped export archive Storage Service shutdown The name used to create a checkpoint register is invalid An exception occurred during access to the Export Archive current checkpoint register No free slots in the Export Archive current checkpoint register The given Export Archive current checkpoint identity is already in the register

Failed to create lock for checkpoint register Lock Name: %1 Failed to lock checkpoint register object Checkpoint Register: %1 Method Id: %2 Failed to unlock checkpoint register object Checkpoint Register: %1 Failed to initialize the Export Archive current checkpoint register memory mapping Failed to read the Export Archive current checkpoint register Registry values The given Export Archive current checkpoint identity is too long EMC Centera Server is not ready. Pool Address: %1 This can occur when Storage nodes have not been initialized yet, or the Cluster is in read-only mode because a power rail has failed. EMC Centera Server has no capacity to store data. Pool Address: %1 Error storing saveset in EMC Centera Reason: %1 Saveset: %2 The Clip cannot be deleted from the EMC Centera Server. Pool Address: %1 Clip-Id: %2 VaultStoreId: %3 VaultId: %4 SavesetId: %5 This can be caused by the Clip Retention period or because the Centera does not allow deletes to be performed. <br />e.g.<br />The Clip cannot be deleted from the EMC Centera Server. <br />Pool Address: 127.13.17.13<br />Clip-Id: 3NMK8VSBGFOERe4LGVFV8V6BA5MG60VRFCN700000000000000000<br />VaultStoreId: 12FTR563123D88748849605BB6359FBB41210000vault.acme.com <br />VaultId: 414123120C102F041A2AA756D994B8D4E1110000vault.acme.com <br />SavesetId: 152000000000000~200401071644180000~0~BBB164935DB140AFBC5244C49865726 <br />This can be caused by the Clip Retention period or because the Centera does not allow deletes to be performed.The Archive is unavailable for exporting. Please check the event log and try again later Unspecified error encountered during export operation. Please check the event log Invalid vault for exporting. Vault Name: %1 Vault Id: %2 The Archive is currently unavailable for exporting. Archive Name: %1 Vault Id: %2 Possible reasons include the Archive's index is being updated, the Archive is reserved exclusively for bulk archiving (such as PST migration) or the Archive is being deleted Error reading Mailbox Entry from Vault Directory. Mailbox DN: %1 Error reading Mailbox Entry from Vault Directory. Vault Id: %1 Error restoring Saveset during export operation. Job Id: %1 Vault Name: %2 Vault Id: %3 Saveset Id: %4 Reference: %5 <br>e.g.<br> Error restoring Saveset during export operation. Job Id: Exp3_20042227161943 <br> Vault Name: Dowd, Elwood<br> Vault Id: 59RG8R4L61FE5424A863424CFE79589991110000acme.com <br> Saveset Id: 54F040000000000~200203101505520000~0~RE43E359B16F4A71A68289D6D6F4501 <br> Reference: FMP/MAPI/SC <br> One or more Savesets are offline and the registry value SkipIfOffline is set. Any offline Savesets will have been skipped during the export operation. Job Id: %1 Vault Name: %2 Vault Id: %3 Internal Reference: %4 A COM exception has been raised. %1 Internal reference %2 An exception is raised when a process encounters an unexpected fault. Contact your support representative with details of this and any preceding errors. <br>e.g.<br> A COM exception has been raised. <br> The SQL database server detected a deadlock while accessing the Vault Database '' <br>Description: Additional Microsoft supplied information: Source: Number: SQL State: Native Error: HRESULT SQL Command: [0xc0043433] Internal reference VaultStoreDB.cpp (CVaultStoreDB::GetNextSafeUniqueNumber) [lines {1994,2016,2019,2020,2021,2024}] built May 20 16:28:38 2004 <br> An exception is raised when a process encounters an unexpected fault. Contact your support representative with details of this and any preceding errors. A general exception has been raised. Internal reference %1 An exception is raised when a process encounters an unexpected fault. Contact your support representative with details of this and any preceding errors. EMC Centera C-Clip contains invalid Share type Pool Address: %1 ClipId: %2 ShareType: %3 Unable to create Vault Store Partition. Vault Store : %2 Destination : %3 Internal references: Flags : %4 Error : %1 Reference : %5 The Partition Cache does not exist. The Partition XML is invalid. The Partition Cache is empty. The EnumPartitionsByMigrator method must be successfully called before any other methods of the IMigratorAssister interface. The Partition Cache is missing a required node. The requested Partition was not found in the Partition Cache. Either EnumPartitionsByMigrator has never been called or the Partition no longer exists. Failed to retrieve Partition details from the Directory. Returning previously cached details. Failed to update the Partition Cache. Returning previously cached details. Failed to read the Partition related details from the Directory. Method : %1 Failed to read Collection details. CollectionIdentity : %1 Method : %2 Failed to read the ProgID of the HSM Software Component from the Directory. HSMType : %1 Method : %2 <br>e.g.<br> Failed to read the ProgID of the HSM Software Component from the Directory. <br> HSMType : 0 <br> Method : CVaultStoreDB::GetSavesetFilePath <br> Failed to create the HSM Software Component with ProgID %1 (Vault/VaultStore) EntryId : %2 IdPartition : %3 Method : %4 Failed to recall a Saveset from the HSM Software Component with ProgID %1 %nMethod : %2 Failed to read Partition entry from the Directory VaultEntryId : %1 IdPartition : %2 Method : %3 An attempt was made to rebuild the shared indexable item for one or more Savesets that have been Migrated. The Savesets in question will have their shared indexable items replayed as it is not possible to rebuild them. If a rebuild really is required then the Savesets will need to be Unmigrated. Vault: %1 Vault Id: %2 Vault Store: %3 Vault Store Id: %4 Method : %5 Failed attempting to inform the HSM Software Component with ProgID %1 that a Saveset has been deleted. Saveset Id : %2 Vault Id: %3 Method : %4 Failed setting up the connection to the Vault Store Database. Saveset Id : %1 Vault Id: %2 Method : %3 Failed to set the partition state. Partition Id : %2 Partition State : %3 Internal references:% Error : %1 Reference : %4 Failed to get/set the CacheIfCollected property on the Vault Store object. Internal reference: %1 The Vault Store does not contain any open partitions. Failed to find an attribute in the Partition Cache. The Partition does not exist. Verification of the saveset file failed. Saveset compression failed. Error:%1 Context:%2 Saveset decompression failed. Error:%1 Context:%2 Could not store an item in the saveset file. Reason: %1 Saveset File: %2 This archive attempt has been canceled. <p>e.g.<br> Could not store an item in the saveset file. Reason: Saveset compression failed. Error: Context: [0xc0041aa6] Saveset File: E:\Enterprise Vault Stores\Journal\2003\06\21\08\941300000000000~200304212211490000~0.DVS This archive attempt has been canceled. Could not delete the Collection as its RefCount was not zero.

Could not mirror the Collection as it's already mirrored the maximum number (4) of times. Could not mirror the Collection as it's already mirrored to the requested destination. The specified Saveset does not exist. Could not add the specified Saveset to the Collection as the Saveset already belongs to a Collection. Could not remove the specified Saveset from the Collection as the Saveset does not belong to the Collection. The specified Collection does not exist. The specified Saveset filename was invalid. Failed to decrement the Collection reference count. Reason: %1 CollectionIdentity: %2 Failed to write CAB file. <br> Reason: FCI Error. Could not create a temporary file <Br> CAB File: \\ukshare\vault\Enterprise Vault Stores\Eng\2003\04\10\Collection12.CAB Failed to extract CAB file. Reason: %1. %2 CAB File: %3 <p>e.g.<br> Failed to extract CAB file. Reason: FDI Error. Failure writing to target file CAB File: E:\Enterprise Vault Stores\Eng\2003\03\10\Collection5116.CAB Failed to delete CAB file. Reason: %1 CAB File: %2 Failed to instantiate the GrauCollection object of the Grau Collection API. This API is implemented in the 3rd party Grau library GrauCollection_API.lib. Failed to recall a Saveset from its Collection. Reason: %1 Saveset: %2 Collection: %3 <p>e.g.<br> Failed to recall a Saveset from its Collection. Reason: Failed to extract CAB file. [0xc0041b0f] Saveset: E:\Enterprise Vault Stores\Eng\2003\03\10\14\122500000000000~200303104400350000~0.ARCHDVS <Br> Collection: E:\Enterprise Vault Stores\Eng\2003\03\10\Collection5116.CABThe XML was invalid. An item has been given the 'Uncategorized' retention category An item in the index has an invalid retention category and has been set to 'Uncategorized'. Archive Id: %2 Saveset Id: %3 Retention Category Id: %4 e.g. A Collector encountered an error.<Br> Reason: Error from EMC Centera FPLibrary Function call: Status: () Reason: Pool Address: [0xc0041a68] <br> PartitionEntryID: 4F4213B19A778EF4DBF93BD440FCD79E81q10000ACME.COM <br> Method: CCollectorEMCCentera::HouseKeepA Collector encountered an error. Reason: %1 PartitionEntryID: %2 Problem Saveset: %3 Method: %4 The Collector is not running. Check the Storage Service is running and the Partition still exists. The Collector may also have been scripted to stop via the StopPartitionCollector method. The Storage Service may require a restart. Failed to create a new thread. The requested maximum collection size exceeded the maximum permitted. Requested maximum: %1 Permitted maximum: %2 Method: %3 The GetAsSystemTime method failed. The Collector Manager encountered an error. Reason: %1 Method: %2 <br>e.g.<br> The Collector Manager encountered an error. Reason: The Partition Cache is empty. The EnumPartitionsByMigrator method must be successfully called before any other methods of the IMigratorAssister interface. [0xc0041a92] Method: CCollectorManager::CollectorManager The Collector Manager is not running. Check the Storage Service is running and that no previous errors have been logged. The Storage Service may require a restart. Another StorageFileWatch process running on this machine is using the Collector Manager. Only a single StorageFileWatch process may use the Collector Manager at any given time. The Collector Manager failed to create/start a Partitions Collector. Collection will not take place for this Partition. The Storage Service needs to be restarted in order for Collection to occur in this Partition. Reason: %1 PartitionEntryID: %2 Method: %3 A request was made to resume a Collector for a Partition that is either not being managed by this machine, or the Partition is not using Enterprise Vault Collections i.e. Is of the wrong HSM type. A request was made to run a Collector that is already running. A Partition's Collector run has started. Partition Root Path: %1 <br>e.g.<br> A Partition's Collector run has started. <br> Partition Root Path: E:\Enterprise Vault Stores\Eng A Partition's Collector run has finished. Partition Root Path: %1 %2 Saveset(s) were Collected into %3 Collection(s). The run completed in %4. <br>e.g.<br> A Partition's Collector run has finished. <br> Partition Root Path: E:\Enterprise Vault Stores\Eng <br> 193 Saveset(s) were Collected into 6 Collection(s). <br> The run completed in 0 hour(s), 4 minute(s), 25 second(s). A Partition's Collector will not compact a Collection that contains no more files before expiry/deletion than the number of files defining a Sparse Collection. Partition Root Path: %1 Collection File: %2 Number of files in Collection: %3 Number of files defining a Sparse Collection to be compacted: %4 The database for Vault Store '%1' has a schema version of '%2', which is not the latest version. The Vault Store should be updated using the Vault Administration Console as soon as possible. Starting population of Retention Category information in Vault Store '%1'. Saveset records to be updated: %2 <br>e.g.<br> Starting population of Retention Category information in Vault Store 'ACME STORE1'. <br> Saveset records to be updated: 313541 <br>Completed population of Retention Category information in Vault Store '%1'. Saveset records updated: %2 The schema version has been set to 'V4.0-001'. Completed population of Retention Category information in Vault Store '%1'. Saveset records updated: %2 The schema version could not be updated'. Population of Retention Category information in Vault Store '%1' stopped. Saveset records updated: %2 Saveset records remaining to be updated: %3 The population of Retention Category information will be resumed the next time the Storage Service is started. Completed population of Retention Category information in Vault Store '%1'. Saveset records updated: %2 The Vault Store schema version is '%3', which is not the latest version. The Vault Store should be updated using the Vault Administration Console. Error during population of Retention Category information in Vault Store '%2'. Reason: %1 <br>e.g.<br> Error during population of Retention Category information in Vault Store 'ACME STORE1'. Reason: The remote procedure call failed. [0x800706be] The population of Retention Category information for the Vault Store '%1' could not be completed because information is missing from an Index. Saveset records updated: %2 Saveset records remaining to be updated: %3 Index Replay operations have been requested to recover this information. The population of Retention Category information will be resumed the next time the Storage Service is started. An error occurred while calling the Grau Collection API. This API is implemented in the 3rd party Grau library GrauCollection_API.lib. Reason: %1. %2 Method: %3 Grau Method: %4 A method of the Grau Collection API failed Failed to read the ODBC DSN data from the registry. ODBC DSN: %1 A Collector encountered a recoverable fault while processing a file. This can occasionally occur, but should this warning continue to be logged for the SAME FILE then contact your support representative. Reason: %1 PartitionEntryID: %2 File: %3 Method: %4 The database for Vault Store '%1' has a schema version of '%2', which is not the latest version. The Vault Store should be updated using the Vault Administration Console as soon as possible. The use of file management software requires a Vault Store database schema update. The software will not operate until the update is complete and the Storage Service has been restarted. A PST failed to migrate because the language codepage (%1) specified for the migration is not installed on the Storage Service machine. Invalid Agent Service Entry Id Status: %1 EntryId: %2 Error occurred when sending a MQ message %1 %2 <br>e.g.<br> Error occurred when sending a MQ message<br> One or more of the passed properties are invalid. [0xc00e0002]

An error occurred attempting to update Storage databases Reason: %1 Reference: %2 Script File: %3 An error occurred attempting to update Storage database Reason: %1 Reference: %2 Script File: %3 Vault Store: %4 Vault Store Id: %5 Database Name: %6 DSN: %7 Completed update of Storage database Script File: %1 Vault Store: %2 Vault Store Id: %3 Database Name: %4 DSN: %5 An error occurred setting database query criteria Reason: %1 Reference: %2 Additional Info: %3 You do not have an Open Storage Layer (OSL) license. If you want to use the OSL please contact your license supplier. Your Open Storage Layer (OSL) license has expired. If you want to use the OSL please contact your license supplier. Items cannot currently be stored in the Vault. The Vault Store does not contain an open partition. Vault Name: %1 Vault Id: %2 Reference: %3 <p>Unable to complete archive request Reason: %1 Vault: %2 Vault Id: %3 Item: %4 Item Id: %5 Reference: %6 Supplementary Info: %7 </p> <p>e.g.</p> <p>Unable to complete archive request<br /><br />Reason: Item cannot be archived. Several attempts to archive the item have failed or been interrupted. To prevent further failures the item should not be presented for archival again. [0xc00419bb]<br />Vault: Misc<br />Vault Id: 1S4A45111C30D4944B86F75044F1999291110000ACME<br />Item: Saveset Message for Mailbox /o=ACME /ou=zko/cn=Recipients/cn=DowdP, Message titled: Six foot white rabbits<br /></p>Unable to complete retrieval request Reason: %1 Vault: %2 Vault Id: %3 Item Id: %4 Reference: %5 Suplementary Info: %6 %7 <br>e.g.<br> Unable to complete retrieval request <br> Reason: The parameter is incorrect. [0x80070057] <br> Vault: Elwood P Dowd Vault Id: 14123R5C6A87D544CB21A585D9047C2F71110000acme Item Id: 14123R5C6A87D544CB21A585D9047C2F71110000acme+300120000000000~200204110843120000~0~CEB18767AC5242B7A0D1D9DA18D5695+0++1321+2+38229.601894444444+86+702 Reference: LMI/rs Suplementary Info: EnterpriseVault.Collector Id: 1321 Unable to complete deletion request Reason: %1 Vault: %2 Vault Id: %3 Item Id: %4 Reference: %5 Supplementary Info: %6 %7 Unable to complete item properties request Reason: %1 Vault: %2 Vault Id: %3 Item Id: %4 Reference: %5 Supplementary Info: %6 %7 The requested Saveset is not contained within the currently selected archive Archive: %1 Saveset Id: %2 Unable to retrieve item, if an HSM is being used check that it is running Saveset Id: %1 Saveset File: %2 Vault Store: %3 Vault Store Id: %4 Partition: %5 Partition Id: %6 Attempted to use a Saveset that is busy. Reason: %1 Saveset Id: %2 One or more arguments are ambiguous The Storage Service is not running The request was refused due to insufficient privileges. User must be an administrator to perform this operation User: %1 Request: %2 Supplementary Info: %3 The request was refused because the Archive currently exceeds its usage limits. Vault: %1 Vault ID: %2 The request was refused because the Archive is full. Vault: %1 Vault ID: %2 The request was refused because the Storage server is too busy. Supplementary Info: %1 %2 %3 The 'SparseCollectionPercentage' registry value was set to %1. This percentage is outside the acceptable range of [0, 99] and will be ignored. Instead, the default percentage of %2 will be used by each Collector. Cannot find the Enterprise Vault document conversion template file. Reason: %1 Template File: %2 Reverting to the standard template to generate HTML output. <br>e.g.<br> Cannot find the Enterprise Vault document conversion template file. <br> Reason: The system cannot find the file specified. [0x80070002] <br> Template File: C:\Program Files\Enterprise Vault\Converters\EVTemplateMain.htm <br> Reverting to the standard template to generate HTML output. <br> Error creating the converters temporary files directory. Path: %1 Reference: %2 Vault Store schema version not supported. An error occurred attempting to initialize a Vault Store database connection. [Internal reference %1] An error occurred attempting to obtain Archive statistics. Reason: %1 EMC Centera connection does not have required Capability Pool Address: %1 Missing Capability: %2 %3Operation %1 cannot be performed on a Failover EMC Centera connection Pool Address: %2 Unable to update Vault Store Partition record. Partition : %2 Destination : %3 Internal references: Flags : %4 Error : %1 Reference : %5 <br>e.g.<br> Unable to update Vault Store Partition record.<br> Partition : 4JF8RKDSU7453LDPQ348A590E78088278071q10000kvault.acme.com<br> Destination : Internal references:<br> Flags : <br> Error : EMC Centera Collection cannot be disabled until all uncollected Savesets have been collected. If the Storage Service is not running start it and try again later. If the Storage Service is running try again later. [0xc0041af9]<br> Reference : StorageManage.cpp (CStorageManage::EMCCenteraDisableCollection) [lines {...,2967,2968,2977,2978,2982,2986,2987,2988,2998,3013,3017,3019}] built Feb 13 18:34:42 2004 EMC Centera Collection cannot be enabled on a partition which is not a Centera with collection disabled. EMC Centera Collection cannot be disabled on a partition which is not a Centera with collection enabled. EMC Centera Collection cannot be disabled until all uncollected Savesets have been collected. If the Storage Service is not running start it and try again later. If the Storage Service is running try again later. The PST migration has failed because the structured archive does not contain a root folder. You must synchronize the folder hierarchy of the mailbox. See the administration help on how to synchronise a mailbox. Unable to convert item as there is no converter available for the document type, and it is not recognised as text. Vault Store Database error. No ArchivePoint record was found for VaultId %1. [Internal reference %2] Failed to set the current Vault. VaultId: %1 [Internal reference %2] Vault Store Database error. Failed to set the replay state to %1 for VaultId %2. [Internal reference %3] Some items could not be deleted from the PST file. Number of items not deleted: %1 PST file: %2 Archive Name: %3 Vault Id: %4 Some items could not be moved to the target mailbox. Number of items not moved: %1 PST file: %2 Archive Name: %3 Vault Id: %4 Exchange Server\Mailbox: %5 Some items could not be converted to shortcuts. Number of items not converted: 1 <P></P> PST file: D:\PSTpilot\ARCHIVE.PST<P></P> Archive Name: Test User<P></P> Vault Id: 181D3E8273ED1E441A1449EE6594311281110000KVAULT.local Index update request abandoned. Index Id: %1 Request: %2 All previous attempts to process the Index update request have failed or been interrupted. To prevent further failures the request will be discarded. Saveset is temporarily unavailable. Try operation again later. An error was encountered attempting to delete a Partition directory. Reason: %1. %2 Method: %3 A Partition's Collector run has finished. Partition Root Path: %1 %2 Saveset(s) were Collected into %3 Collection(s). %4 Collection(s) were Migrated to secondary storage. The run completed in %5. <br>e.g.<br> A Partition's Collector run has finished. <br> Partition Root Path: G:\Enterprise Vault Stores\ACME <br> 0 Saveset(s) were Collected into 0 Collection(s). <br> 0 Collection(s) were Migrated to secondary storage. <br> The run completed in 0 hour(s), 6 minute(s), 23 second(s). A Collector encountered an error during migration. The Collector will abandon migration for the current run. Migration attempts will continue during future runs. Reason: %1 PartitionEntryID: %2 Secondary Storage Location: %3 Method: %4 (%5) e.g.<br> Completed archive conversion and update of Archive Index with Storage transactions 1 to 86830 <br> Archive: Elwood Dowd <br> Archive Id: 412RET5QD13DBD3119CAC00508B070AE51110000vault.acme.com <br> Vault Store: UK <br> Vault Store Id: 48FHE21DSEBDAD3119CAB00508B070AE51210000vault.acme.com<br> Elapsed Time: 1:10:34 (hours:minutes:seconds) <br> Number of index additions replayed: 1 <br> Number of index deletions replayed: 0 <br> Restarting archive conversion and update of Archive Index with Storage transactions from %1 to %2 Archive: %4 Archive Id: %3 Vault Store: %5 Vault Store Id: %6 NOTE: Index additions will use the common index elements currently stored in the archived item. e.g.<br> Starting archive conversions and update of Archive Index with Storage transactions from 1 to 86830 <br> Archive: Elwood Dowd<br> Archive Id: 412RET5QD13DBD3119CAC00508B070AE51110000vault.acme.com <br> Vault Store: UK <br> Vault Store Id: 48FHE21DSEBDAD3119CAB00508B070AE51210000vault.acme.com

Update of Archive Index with Storage transactions from %5 to %6 suspended whilst processing transaction number %7 during archive conversion Archive: %2 Archive Id: %1 Vault Store: %3 Vault Store Id: %4 Elapsed Time: %8 (hours:minutes:seconds) Number of index additions replayed: %9 Number of index deletions replayed: %10 NOTE: The total number of index additions and deletions replayed may be less than the number of transactions processed. This is because the index update process is optimized so that index additions are not replayed for items that are known to have been fully deleted from the Vault. Number of archived items with an old version of the common index elements: %11 NOTE: Index additions used the common index elements stored in the archived item. Items with old versions of the common index elements may not be indexed with the same level of functionality as items archived using the latest version of the common index elements. e.g.<br> Archive Conversion Report<BR> Archive: Elwood Dowd <BR> Archive Id: 14RE5QWD13DBD3119CAC00508B070AE51110000vault.acme.com<br> Number of items processed: 0 <br> Number of items remaining in original default Archive: 0<BR>Update of Vault Index completed processing Storage transactions from %1 to %2. Continuing... Vault: %4 Vault Id: %3 Vault Store: %5 Vault Store Id: %6 Number of items moved to Archive Folders: %7 Number of new Archive folders created: %8 Convert Archive request refused as archive is already structured. Archive Name: %1 Vault Id: %2 Reference: %3 Failed to write CAB file. Failed to extract CAB file. Could not create a temporary file. If this warning continues to be logged contact your support representative. Reason: %1. %2 Error adding UTC Date attribute to indexable item An error occurred obtaining the VaultEntryId from the VaultIdentity. [Internal reference %1] An error occurred obtaining the Saveset file path. [Internal reference %1] Error deleting PST file PST file: %1 Reference: %2 PST migration has been successfully completed but deletion of the PST failed. The PST will need to be deleted manually. You do not have a Hierarchical File Migrator (HFM) license. If you want to use the HFM please contact your license supplier. Your Hierarchical File Migrator (HFM) license has expired. If you want to use the HFM please contact your license supplier. <p>A Collector encountered an error attempting to migrate Collection file %2 to %3. The Collector will abandon migration for the current run. Migration attempts will continue during future runs. Reason: %1 PartitionEntryID: %4 Secondary Storage Location: %5 Method: %6 (%7) </p> <p>e.g.</p> <p>A Collector encountered an error attempting to migrate Collection file E:\Enterprise Vault Stores\EXUSNY1 Ptn11\1999\01\02\Collection59766.CAB to F:\US\VAULT_STORES\EXUSNY1\Partition 11 migration\FB933F8AE14B4C4E9593C9212886AB36\1999\01\02\Collection59766.CAB. The Collector will abandon migration for the current run. Migration attempts will continue during future runs. </p> <p>Reason: The system cannot find the path specified. [0x80070003] </p> <p>PartitionEntryID: 1FB933F8AE14B4C4E9593C9212886AB361q10000ACME-NY </p> <p>Secondary Storage Location: F:\US\VAULT_STORES\EXUSNY1\Partition 11 migration </p> <p><font size="1"><font size="3">Method: CMigrator::SendFile (SF/CD/F:\US\VAULT_STORES\EXUSNY1\Partition 11 migration\FB933F8AE14B4C4E9593C9212886AB36)</font> </font></p>A Collector encountered an error attempting to verify the successful migration of Collection file %2. This unverified Collection file has been deleted from the secondary storage location. The Collector will abandon migration for the current run. Migration attempts will continue during future runs. Reason: %1 PartitionEntryID: %3 Secondary Storage Location: %4 Method: %5 (%6) A Collector encountered an error attempting to verify the successful migration of Collection file %2. This unverified Collection file could not be deleted, and should be removed manually from the secondary storage location. The Collector will abandon migration for the current run. Migration attempts will continue during future runs. Reason: %1 PartitionEntryID: %3 Secondary Storage Location: %4 Method: %5 (%6) The size of the Collection file on primary storage is different to the size of the same Collection file on secondary storage. Error restoring Saveset during export operation. Operation aborted as there is not enough free disk space. Job Id: %1 Vault Name: %2 Vault Id: %3 Saveset Id: %4 PST Filename: %5 Client request refused due to insufficient privileges user %1 attempted to access the Archive: Archive name: %2 Vault Id: %3 but does not have permission(s) (%4). A frequent cause of this Warning is a user attempting an operation on a forwarded moved or copied shortcut to a Vault for which they do not have the required permission(s). Client request refused due to insufficient privileges user %1 attempted to access the Archive Folder: Archive name: %2 Archive folder path: %3 Vault Id: %4 but does not have permission(s) (%5). A frequent cause of this Warning is a user attempting an operation on a forwarded moved or copied shortcut to a Vault for which they do not have the required permission(s). The Access Control List of the archive/folder identified by %1 has been truncated because its length exceeded the maximum. Number of present Access Control Entries: %2 Number of truncated Access Control Entries: %3<br />e.g.<br />The Access Control List of the archive/folder identified by '140E5472153C07F4E9B91B53658461E1B1110000EV1.acme.com' has been truncated because its length exceeded the maximum.<br /><br />Number of present Access Control Entries: 1820<br />Number of truncated Access Control Entries: 34707<br /><br />For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp<br /><br /><br /> The PSTs configuration file was not saved as there is not enough free disk space. Filename: %1 Failed to create target PST as there is not enough free disk space. PST file: %1 Account: %2 There is not enough disk space to complete compaction of Collection files. Partition root path: %1 Required disk space: %2 Available disk space for compaction: %3 Total free disk space: %4 Invalid HSMType. Failed to send file to WORM. Reason: %1 Filename: %2 Reference: %3 The DocumentSIS class threw an exception. A Collector encountered a Saveset of size 0 bytes. The Saveset will be ignored by the Collector. PartitionEntryID: %1 Saveset: %2 File too large (> 2Gbytes) to store. Large file Saveset <p>A EMC Centera Collector thread encountered an error and has stopped. Reason: %1 PartitionEntryID: %2 Method: %3 </p> <p>e.g.</p> <p><font face="Courier New"><font size="4"><font face="Times New Roman, Times, serif"><span class="FIXEDFONT">A EMC Centera Collector thread encountered an error and has stopped.</span><br /></font><tt><span class="FIXEDFONT"><font face="Times New Roman, Times, serif">Reason: Not enough storage is available to complete this operation. &nbsp;[0x8007000e]</font>&nbsp;&nbsp;</span></tt></font></font></p>Saveset cannot be deleted from the Partition. The 3rd party Migrator application '%1' has logged the following message: %2 Object not initialised You do not have a Storage Application Program Interface (API) license. If you want to use the API please contact your license supplier. For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp Your Storage Application Program Interface (API) license has expired. If you want to use the API please contact your license supplier. For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp The Storage Service has started the automatic upgrade of the %1 Database. The Storage Service will become fully operational when the upgrade is complete. For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp The Storage Service has completed the automatic upgrade of the %1 Database. For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp The archived item is being retrieved from a slow device. Try again later. For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp Failed to read Collection file. Check the Storage Service is running. Reason: %1 Relative Collection Filename: %2 Extract Operation: %3 Reference: %4 For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp Invalid Extract Operation. Extract Operation: %1 Reference: %2 For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp Warning from StorageRestore. %1 SavesetID: %2 VaultID: %3 VaultStoreID: %4 For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp Could not restore temporarily unavailable Saveset during export operation. %1 Job Id: %2 Vault Name: %3 Vault Id: %4 Saveset Id: %5 Reference: %6 For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp Addition of item to catalogue abandoned. %1 Catalogue: %2 Catalogue Id: %3 Vault Store: %4 Vault Store Id: %5 Saveset Id: %6 Relative Collection Filename: %7 Reference: %8 For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp Error starting Storage Crawler. %1 For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp Unable to complete request since a context has not been set. For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp Unable to complete request since an archive has not been selected. For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp The specified archive does not exist. ArchiveID: %1 For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp

The request timed out. For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp There are no more items. For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp The request was refused because the server is temporarily disabled. For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp Storage Crawler is not enabled. For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp There are no pending item revisions matching the selection criteria. For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp The request was refused because the server is temporarily unavailable. For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp A Partition's Collector/Migrator run has started. Partition Root Path: %1 For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp The MigratorServer cannot start because the required version of MAPI is missing or incorrectly configured on the Enterprise Vault server: To resolve the problem: 1. Stop all Enterprise Vault services and processes that are using MAPI. 2. Ensure that a version of MAPI supplied with Microsoft Outlook 2003 or later is installed and correctly configured on the Enterprise Vault server. 3. Restart the Enterprise Vault services. If the problem persists, see the "Troubleshooting" section of the Enterprise Vault Administration help file for guidelines on how to proceed. For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp An error occurred when calculating the expiration date of a retention category Retention Period: %1 Units: %2 Reference: %3 For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp AutoStorageOnline error. Reason: %1 Reference: %2 For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp Error storing Saveset in Centera Collection temporary file location Reason: %1 Saveset Id: %2 For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp Storage Expiry and Item Deletion are disabled. For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp The archive auto security descriptor structure is invalid. For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp The archive manual security descriptor structure is invalid. For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp The folder auto security descriptor structure is invalid. For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp The folder manual security descriptor structure is invalid. For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp Unable to complete update request Reason: %1 Vault: %2 Vault Id: %3 Item Id: %4 Reference: %5 Supplementary Info: %6 %7 For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp Operation is only supported on a Compliance device on which retention periods can be set, are enforced, and can be changed For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp A PST failed to migrate because it is too full to process. Split the PST and attempt to migrate in two parts. For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp Verification of a Saveset file contained within a Collection file failed. Reason: %1 PartitionEntryID: %2 Saveset: %3 Collection: %4 Message: %5 Method: %6 For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp Verification of a Saveset file prior to being added to a Collection file failed. Reason: %1 PartitionEntryID: %2 Saveset: %3 Message: %4 Method: %5 For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp A Collector has determined that the VerifyCollectedFiles registry key is disabled while the VerifyFilesInNewCollection registry key is enabled. VerifyFilesInNewCollection is therefore ignored. For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp Error writing to cache location. This is usually caused by lack of disk space. For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp A cache location cannot be found in the ComputerEntry table. For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp The migration request was refused because the file is too large for the secondary storage device. PartitionEntryID: %1 File: %2 Method: %3 (%4) For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp The Vault Store could not be completely deleted because the Partition with EntryId '%1' contains one or more files with a retention period (on the secondary storage device) that has not yet expired. Vault Store Name: %1 Vault Store Id: %2 The operation can be retried at any time. For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp Content Management API authentication failed - EnterpriseVault.AuthServer not available. For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp Could not get the temp file path. If this warning continues to be logged contact your support representative. For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp Archive operation cancelled because the archived file '%3' was of size 0 bytes. The item has not been archived. [Vault Store: %1] [Vault ID: %2] [Transaction ID: %4] For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp The PST migration failed because mailbox '%1' has not been provisioned. Check that the mailbox is in a provisioning group, run the provisioning task, and then try the migration again. For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp Unable to create archive because no Indexing Service is defined for computer '%1'. Use the Administration Console to do one of the following: -- Add an Indexing Service to computer '%1' -- Edit the properties of computer '%1' to specify a Default Indexing Service [Archive Name: %2] [Archive Type: %3] [Vault Store: %4] For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp An error occurred while converting the saveset into legacy saveset format. [Saveset ID: %1] [Format: %2] [ClientVersion: %3] MAPI is required to download savesets to legacy Enterprise Vault clients. Check that MAPI is installed on this server. For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp Application: %1 %2 For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp EMC Centera Clip not found Function call: %1 Status: %2 (%3) Reason: %4 Pool Address: %5 For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp Abnormal error occurred HR Error: %1 NSF file: %2 Archive Name: %3 Vault Id: %4 Reference: %5 For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp Unspecified error. Check the event log For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp Some items could not be deleted from the NSF file. Number of items not deleted: %1 NSF file: %2 Archive Name: %3 Vault Id: %4 For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp Some items could not be moved to the target mailbox. Number of items not moved: %1 NSF file: %2 Archive Name: %3 Vault Id: %4 Domino Mailbox: %5 For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp Some items could not be converted to shortcuts. Number of items not converted: %1 NSF file: %2 Archive Name: %3 Vault Id: %4 For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp NSF Migration Report Migration status: %1 NSF file: %2 Archive Name: %3 Vault Id: %4 Retention Category: %5 Domino Mailbox: %6 More information: %7 Elapsed Migration Time: %8 (hours:minutes:seconds) For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp The NSF MigratorServer is unable to initialize the Domino or Notes runtime sytem For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp NSF Migrator Server started For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp NSF Migrator Server stopped For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp The Directory Service is unavailable. Try again later For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp NSF Migrator Server initialization failure For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp Storage Service has shutdown For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp Insufficient mailbox quota available For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp Target Domino Server mailbox cannot be opened For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp

Target Domino Server mailbox cannot be opened Mailbox:%1 For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp Did not attempt to delete the NSF file. It still has data in it NSF file: %1 For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp Failed to set the NSF file's read-only attribute NSF file: %1 For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp Failed to set the NSF file's hidden attribute NSF file: %1 For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp An error occurred while creating new entries in directory database for fingerprint catalogue instance. Following further details are available. Vault Store Group Entry Id: %1 Target SQL Server name: %2 For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp Partition rollover could not determine which partitions are served by Storage Service %2. %1 For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp Partition rollover could not read the Vault Directory %1 For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp Partition rollover could not find the next Vault Store in the result list. %1 For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp An exception has occurred in partition rollover watch thread: %1 [Internal reference %2] For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp Partition rollover could not find any ready partitions for VaultStore %2 of Storage service %1. Note All Partitions in of vaultStore %2 will be closed. Use VAC to create a new open partition or open an existing partition. For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp Partition rollover has occurred. Details: Storage Service ID:%1 Vault Store: %2 Closed Partition: %3 Opened Partition: %4 Triggering Mechanism: %5 For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp The ready partitions for VaultStore %2 of Storage service %1 are %3. For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp Partition rollover failed. Status:%1 Details: Storage Service ID:%2 Vault Store: %3 Triggering Mechanism: %4 For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp Item location cannot be updated. The requested destination folder is not within the item's archive. For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp The item's Retention Category cannot be updated. The original Retention Category prevents deletion of archived items but the new one does not. For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp Could not get the exclusive lock for fingerprint database '%1' on SQL Server '%2'. Please ensure that no other application is accessing this database. For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp Could not get the exclusive lock for fingerprint database '%1' on SQL Server '%2' even after %3 attempts. Please ensure that no other application is accessing this database. For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp Database update started for fingerprint database '%1' on SQL Server '%2'. For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp Database update completed for fingerprint database. Following details are available. Fingerprint Database name:%1 SQL Server name:%2 Old Schema Version:%3 New Schema Version: %4 For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp Fingerprint database update failed for vault store group identity - '%1'. For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp The Storage Service was stopped while waiting for an update of the fingerprint database(s) to be performed for vault store group identity '%1'. For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp The Storage Service is waiting for another Storage Service to complete an update of the Fingerprint database '%1', or waiting to get exclusive access to this database. Please ensure no applications, for example SQL Enterprise Manager or SQL Query Analyzer, are accessing this database. %2 For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp An error occurred while trying to obtain a Vault Store Group having id:%1. For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp A badly formed IPv4 IP Address string was provided to the Connectivity Test. For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp A bad IPv4 IP Address was provided to the Connectivity Test. For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp Insufficient mail file quota available For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp Target Domino Server mail file cannot be opened For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp The Vault Store is currently in Backup Mode. For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp Unable to set Vault Store Backup Mode. Reason:%1 %2: %3 Name: %4 For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp Unable to restart StorageFileWatch threads. Reason:%1 For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp Unable to restart StorageDelete threads. Reason:%1 For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp StorageFileWatch threads restarted successfully. For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp StorageDelete threads restarted successfully. For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp An error occurred whilst inserting into the Vault Store Database PartitionCache table. VaultStoreEntry: %1 PartitionEntry: %2 IdPartition: %3 Error: %4 For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp An error occurred whilst updating the Vault Store Database PartitionCache table. VaultStoreEntry: %1 PartitionEntry: %2 IdPartition: %3 Error: %4 For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp An error occurred whilst deleting from the Vault Store Database PartitionCache table. VaultStoreEntry: %1 PartitionEntry: %2 IdPartition: %3 Error: %4 For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp Target Domino Server mail file cannot be opened Mailbox:%1 For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp Did not attempt to delete the NSF file. It still has data in it NSF file: %1 For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp Failed to set the NSF file's read-only attribute NSF file: %1 For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp Failed to set the NSF file's hidden attribute NSF file: %1 For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp Successfully set Backup Mode on Vault Store. Vault Store Name: %2 Vault Store EntryID: %1 For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp Successfully set Backup Mode on all the Vault Stores in the Vault Store Group that are managed by the Storage Service on this computer. Vault Store Group Name: %2 Vault Store Group EntryID: %1 Storage Service EntryID: %3 For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp Successfully set Backup Mode on all the Vault Stores that are managed by the Storage Service on this computer. Computer Name: %2 Storage Service EntryID: %1 For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp A unique name could not be generated for the Partition Network Share. For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp An error occurred while deleting a Partition Network Share. PartitionEntry: %1 RemotePath: %2 DirectoryPath: %3 Error: %4 For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp A new Partition Network Share was created. PartitionEntry: %1 DirectoryPath: %2 RemotePath: %3 For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp The verification of Partition Network Shares failed. Info: %1 For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp Verification of a Partition Network Share failed. For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp

A new Partition Network Share was created after verification of the previous one failed. PartitionEntry: %1 DirectoryPath: %2 NewShareName: %3 OldShareName: %4 For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp The Storage Service was stopped while waiting for verification of Partition Network Shares to happen for Storage Service EntryId '%1'. For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp Due to an inconsistency the Remote Partition Root Path for this Partition was updated to the correct value. PartitionEntry: %1 DirectoryPath: %2 NewValue: %3 OldValue: %4 For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp Failed to obtain or reaffirm synchronization slot For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp SIS part validation failed. The fingerprint for the SIS part generated during validation does not match the fingerprint created when it was archived. For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp Fingerprint validation failed. The fingerprint set for the saveset generated during validation does not match the fingerprint set created when it was archived. For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp SIS part validation failed. The fingerprint for SIS Part 0 generated during validation does not match the fingerprint created when it was archived. For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp Saveset validation failed. The fingerprint set for the saveset could not be loaded. For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp The specified identifier already exists. For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp PST migration stopped because the Vault Store is currently in backup mode. Vault Store Name: %1 VaultStoreID: %2 For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp The Saveset is not in the currently-selected archive. For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp Legacy registry values are in use. Enterprise Vault has a new method of backing up Vault Stores that cannot be used until you remove this registry value. See the Administrator's Guide for information about backing up Vault Stores. The following legacy registry values were found: %1 For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp The following Vault Stores are currently in backup mode: %1 For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp Successfully cleared Backup Mode from Vault Store. Vault Store Name: %2 Vault Store EntryID: %1 For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp Successfully cleared Backup Mode from all the Vault Stores in the Vault Store Group that are managed by the Storage Service on this computer. Vault Store Group Name: %2 Vault Store Group EntryID: %1 Storage Service EntryID: %3 For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp Successfully cleared Backup Mode from all the Vault Stores that are managed by the Storage Service on this computer. Computer Name: %2 Storage Service EntryID: %1 For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp Unable to clear Vault Store Backup Mode. Reason:%1 %2: %3 Name: %4 For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp Retrieval of saveset failed. Archive Id: %1 Transaction Id: %2 Extended information: %3 Internal Ref: %4 For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp Migration has started for: %1 For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp Storage Expiry Report Vault Store Name: %1 Vault Store Id: %2 Number of vaults processed: %3 Number of vaults enabled for expiry: %4 Total number of expired items deleted: %5 Total number of items that could not be deleted: %6 Items marked with sent\received date based retention categories have been deleted: %9 Items marked with archived date based retention categories have been deleted: %10 Start Time: %7 End Time: %8 For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp Storage Expiry Report (Report Mode) Vault Store Name: %1 Vault Store Id: %2 Number of vaults processed: %3 Number of vaults enabled for expiry: %4 Total number of expired items: %5 Items marked with sent\received date based retention categories have been deleted: %8 Items marked with archived date based retention categories have been deleted: %9 Start Time: %6 End Time: %7 For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp Unable to read registry key %2. Details: %1. For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp Unable to delete registry key %2. Details: %1. For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp Registry settings for backup were migrated successfully. For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp An exception has occurred in File watch thread: %1 [Internal reference %2] For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp An exception occurred while migrating the backup registry values to directory database %1. For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp An exception occurred while validating the trigger file. For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp Unable to find the trigger file for notifying that the partition is secure. Partition name: %2. Partition path: %3 Reason: %1 For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp Error validating the %1 in the XML trigger file for notifying that the partition is secure. File path: %2 Reason: %3 For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp The StorageFileWatch process could not enumerate the partitions served by Vault Store %2, Storage Service %3. %1 For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp The StorageFileWatch process could not read the details of a partition on Vault Store %2. %1 For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp Replication is disabled for EMC centera partition '%1' on Vault Store '%2'. For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp A locking error has occurred. For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp %1 is not a valid Vault Store ID. Enter the Vault Store ID as shown in the Vault Store properties. For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp The details you provided match multiple Vault Stores. Enter the Vault Store ID as shown in the Vault Store properties. For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp Watch file partition scan will be stopped for following EMC centera partition as [%1] consecutive unreplicated clips were found. Partition Name = %2 VaultStoreEntryId = %3 For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp Watch file partition scan stopped for all the partitions on a VaultStore as it is entering the backup mode. Vault Store Name: %1 Vault Store EntryID: %2 For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp Watch file partition scan restarted for all the partitions on a VaultStore as it is exiting the backup mode. Vault Store Name: %1 Vault Store EntryID: %2 For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp An error occurred while trying to raise SIS parts secured notification. Following information is available. Error: %1 Partition Name = %2 VaultStoreEntryId = %3 For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp SIS part validation failed. The stored SIS part could not be found at the expected location. For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp SIS part validation failed. The stored SIS part size is different to the size expected. For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp SIS part appears to have been migrated successfully. For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp An error occurred while trying to submit a partition scan request. Following information is available. Error: %1 VaultStoreEntryId = %2 For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp An invalid saveset was encountered while doing watch file scan. This archive operation will be attempted to be cancelled. Following further information is available. Partition Name = %1 VaultStoreEntryId = %2 TransactionID = %3 Invalid Reason = %4 For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp An invalid SIS part was encountered while doing watch file scan. Following further information is available. Partition Name = %1 VaultStoreEntryId = %2 ParentTransactionID = %3 Invalid Reason = %4 For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp The selected Vault Store Group doesn't have a Fingerprint Catalogue database. For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp A problem was encountered while part of an item was being archived. A new copy of the part in question will be made in the vault, and the old copy will be 'blacklisted' to prevent further problems occurring. Reason = %1 ParentTransactionId = %2 Attachment Id =%3 Old SIS part Id = %4 New SIS part Id = %5 For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp Following archive could not be deleted as it contains items that are on hold, or their retention category does not allow deletions, or a compliance device retention period prevents them from being deleted. Archive Name = %1 Archive Entry Id = %2 Total items on hold = %3 For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp

Failed to delete a Partition. Partition Entry Id : %2 Vault Store Entry Id: %3 Internal references: Error : %1 Reference : %4 For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp Vault Store group has been deleted Vault Store Group Name: %1 Vault Store Group EntryId: %2 For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp Failed to access file '%2'. Reason: %1 Operation: %3 Reference: %4 For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp Failed to access file '%2'. Check the '%5' is running and that there are no errors with Source PDVFS in the Application event log. Reason: %1 Operation: %3 Reference: %4 For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp An error occurred while trying to recover from an error during archiving. The database and partition may be in an inconsistent state. For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp Secured item verification failed for one or more SIS parts of a saveset. Following further information is available. Partition Name = %2 VaultStoreEntryId = %3 Saveset TID = %4 Reason = %1 For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp The converted content is too large to process For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp No index locations were found for the archiving task to run. [Internal reference %1] For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp An error occurred while attempting to delete a SIS part from a partition. A reference to a SIS Part that has been marked as unreferenced in the Fingerprint Catalogue has been found in one of the vault stores in the vault store group. Please contact your support representative. The following information is available: %1 For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp Verification of a Sis Part file being collected failed. Reason: %1 PartitionEntryID: %2 Saveset: %3 Collection: %4 Message: %5 Method: %6 For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp Verification of a Saveset file being collected failed. Reason: %1 PartitionEntryID: %2 Saveset: %3 Collection: %4 Message: %5 Method: %6 For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp An arithmetic overflow occurred in '%1' method. Following further information is available. %2 For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp Could not start storage service for following reasons. Reason: %1 Internal Ref: %2 For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp Attachment is corrupt and cannot be extracted. For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp Attachment is encrypted and cannot be extracted. For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp The Vault Store has not been upgraded. For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp Validated the XML trigger file for notifying that the partition is secure.The details are as follows: Partition Name:%1 PartitionEntryID: %2 FilePath: %3 Vendor Name: %4 Vendor AppType: %5 Partition Secured DateTime = %6 Vendor TransactionId = %7 For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp Two or more partitions are configured to use the same location. The Storage service will not start until all partition locations are unique. Affected partitions:%1 Please contact your support representative. For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp The Enterprise Vault server is using legacy registry values that place Enterprise Vault into read-only mode. Backup mode cannot be used until you remove these registry values. Check the event log on the Enterprise Vault server. For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp A Partition's Collector run has finished. Some files were not collected because they have not been backed up. Partition Root Path: %1 Archived items: %2 Files added to collections: %3 Collections: %4 Time taken for the run [H:M:S]: %5:%6:%7 For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp A Partition's Collector/Migrator run has finished. Some files were not collected because they have not been backed up. Partition Root Path: %1 Archived items: %2 Files added to collections: %3 Collections: %4 Files migrated to secondary storage: %5 Time taken for the run [H:M:S]: %6:%7:%8 For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp Failed to extract the file from the CAB file. The file name is not in the CAB file index. For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp Could not find the sis part corresponding to input attachment identifier. For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp The database for Vault Store '%1' has a schema version of '%2', which is not the latest version. Start the Storage service that hosts the Vault Store in order to upgrade the schema version. Start the Storage service on: %3 For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp The specified archive is closed and cannot be used for archiving. Vault Id: %1 Reference: %2 For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp PST Migration started. PST file: %1 For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp Failed to compact the NSF file NSF file: %1 For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp Failed to delete the NSF file NSF file: %1 For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp The item definition table is full. For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp Two or more partitions are configured to use the same location. For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp Error adding Start attribute to indexable item For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp Error adding End attribute to indexable item For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp Error adding Location attribute to indexable item For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp Error adding Due Date attribute to indexable item For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp Error adding Date Completed attribute to indexable item For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp Error adding Status attribute to indexable item For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp AuthClient not installed locally - cannot authenticate client identity. For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp You cannot create a folder in an unstructured archive. For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp An attempt was made to move an ArchiveFolder beneath itself (hierarchy inversion) For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp An attempt was made to delete an ArchiveFolder but the folder was not empty. For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp The specified archive folder does not exist. For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp An attempt was made to delete an ArchiveFolder but the folder has outstanding journal activity associated with it. For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp An attempt was made to delete an ArchiveFolder record but the folder was not marked for as deleted. For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp An attempt was made to delete an ArchiveFolder record that still exists in an exchange mailbox. (This may be due to an erroneous call from a 3rd party application using the CM API) For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp Error adding Recurrence Pattern attribute to indexable item For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp Error adding Recurrence Type attribute to indexable item For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp Error adding Recurrence Exception attribute to indexable item For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp A new SQL index has been created to improve the performance of processing items in the Centera collection area. Index Name: %1 Table Name: %2 Database: %3 SQLServer: %4 VaultStoreEntryId:%5 For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp

You are recommended to create a new SQL index for this vault store database to improve the performance of processing items in the Centera collection area. Table Name:%1 Database: %2 SQLServer: %3 VaultStoreEntryId:%4 See %5 for further information. For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp Error adding Archive Transaction ID List attribute to indexable item For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp This command is invalid for the current EVSVR object state. For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp EVSVR stopped processing due to a STOP request. This warning can be ignored. For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp EVSVR is in a failed state and processing is being aborted. For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp An EVSVR work thread did not respond to a STOP request in the required time and will be terminated. For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp The Indexing Service has started (%1) <br>e.g.<br> The Indexing Service has started (5.0.0.5562) The Indexing Service has stopped The Index data has been committed to disk as the word count has been exceeded The Index data has been committed to disk as the timer expired The Index data has been compacted Failed to register the handler for the Indexing Service service control requests: %1 The Indexing Service will not be started An unknown service control request code of '%1' was received by the Indexing Service Index Server is busy compacting and cannot handle any update requests Unable to create directory %1, because: %2 The Index Server could not access data from the directory : %1 Internal Reference : %2 The Indexing Service specified is not known Attribute is invalid and cannot be added to the Indexable Item Internal reference: %1 Could not access indexable item: %1 Internal reference: %2 <br>e.g.<br> Could not access indexable item: Not enough storage is available to complete this operation. [0x8007000e] <br> Internal reference: POPR Could not contact the Indexing Service Please check the Indexing Service has been started on %2 VaultID: %4 Internal reference: %3 : %1 <br>e.g.<br> Could not contact the Indexing Service <br> Please check the Indexing Service has been started on ACMEVAULT1 <br> VaultID: 1D1D02C3867530NINE54C75F76DE8AAF51110000vault.acme.com <br> Internal reference: SGETACCP CoCreate : Access is denied. [0x80070005]<br>Index Search failed: %1 Internal reference: %2 <br>e.g.<br> Index Search failed: The remote procedure call failed. [0x800706be] <br> Internal reference: SRCI<br> Index Update failed: %1 Internal reference: %2 <br>e.g.<br> Index Update failed: Operation aborted [0x80004004]<br> Internal reference: AddItemCould not invoke Index Server Internal Reference %2 : %1 <br>For example:<br> Could not invoke Index Server <br> Internal Reference IAGH CoCreate IndexAgent : Server execution failed [0x80080005] Could not access Directory Service Cannot add attribute at this position in Indexable Item Could not add Indexable Item and Per-user data to Index: %1 Internal reference: %2 Additional Info: %3 <br>e.g.<br> Could not add Indexable Item and Per-user data to Index:<BR> The parameter is incorrect. [0x80070057] <BR> Internal reference: 2E413ACE1FDC9C4D883B46D36ED8397F1110000vault.acme.com<br> Additional Info: load <br>Could start Control Update thread for Indexing Server Could not open Index: %1 Could not execute query Could not remove item from index Index Id: %1 Item Id: %2 %Additional Info: %3 The Index Server has suspended all reads and writes on this Index. The Index Server has suspended all writes on this Index. The Index Server cannot complete the requested operation as it is stopping. Could not create Indexing Service: %1 Could not open Service Manager %1 Could not open Indexing service: %1 Could not delete Indexing service: %1 Could not clear cache Could not delete entry '%1' from the cache Cache management failed. Internal reference %2 A bad pointer was found. That pointer has now been deleted. Internal reference: %2 : %1 Data already present in cache Could not create cache management thread: %1 Could not initialize cache management thread: %1 Internal reference: %2 A locking error has occurred in %3 : %1 Internal reference: %2 %4 Could not initialize lock: %1 Internal reference: %2 Invalid Vault ID %1 entries have been removed from Indexing cache

Asked to cache a bad pointer: [%1] Internal reference: %2 Could not convert path name %2 from UNICODE to ANSI: %1 The Vault Site Account details could not be retrieved from the Directory Service. Failed to read the following registry key: %1 Failed to identify the caller of an Indexing request The Index Server can only be accessed by the Vault Site Account: Vault Site Account: %1 Invalid Account: %2 Client request refused due to insufficient privileges. User %1 attempted to access the Vault with VaultID %2 but does not have permission(s) (%3). The current system time couldn't be determined Internal reference: %1 Asked to remove a server from an empty cache The cache check is incomplete Indexing parameters have been initialized Could not open indexing parameters Reason: %1 Index: %2 <br>e.g.<br> Could not open indexing parameters <br> Reason: Could not open indexing parameters <br> Index: 44REQ24Y6505DEF449DD1216C1CFE33141110000vault.acme.comNot all of the servers could be checked The Local Computer Name could not be Determined : %1 Internal Reference : %2 %1 (Entry) %1 (Exit) %2 %1 (Exit)

1%Indexing trace enabled. Detail level is: %1 Indexing trace detail is set to an illegal value: %1 Could not set tracing level. Tracing is disabled Internal reference: %1 <br>e.g.<br> Could not set tracing level. Tracing is disabled<Br> Internal reference: CRSS A COM error occurred. %1 Internal reference: %2 <BR>e.g.<br> A COM error occurred. <br> A low level indexing operation has failed Error: Index Id: [0x80041c43] <br> Internal reference: CDELW 1RFT5427UAQ2DEF449DD1216C1CFE33141110000vault.acme.comThe Index Client could not advise the Index Server Internal reference: %2 : %1 A document with an invalid ID was found: %1 Could not recognize document type A low level indexing operation has failed Error: %1 Index Id: %2<br />e.g.<br />A low level indexing operation has failed <br />Error: Filter error [AV:24] <br />Index Id: 134A9F3133F55514792A0700563B161601110000acme.com/Volume:1 (Journal Archive) <br /><br />Could not de-allocate memory: %1 Internal reference: %2 A critical Microsoft component, oleaut32.dll, has become unregistered. Please refer to the Enterprise Vault EVAdmin.chm for further information on this known Microsoft problem. (Microsoft Knowledge Base Article - 185599) Could not close an object handle: %1 Internal Reference %2 The Indexing Service cannot service any further requests as it is stopping. An unresponsive IndexServer process has been marked bad Reason: %1 Index: %2 PID: %3 The Indexing Service could not terminate an unresponsive IndexServer Reason: %1 Index: %2 PID: %3 The Indexing service had to terminate an unresponsive IndexServer process <br>Internal Reference: 15F5B236AAD771D428B8366T4ED6CC2521110000vault The index data could not be committed to disk. Possible reasons are: a) Disk space or quota has been exhausted on the index device b) Permissions do not allow the service access to the index c) The index device is not available There are %1 kilobytes available to the account %2 in index location %3 Low level indexing error: %4 AltaVista has raised an 'abort' signal, forcing the IndexServer process to terminate. A new IndexServer process will be started when required. An IndexServer could not login user: %1\%2 in the Windows NT domain Make sure that the 'Act as part of the operating system' user right has been granted to the Enterprise Vault site service account on the machine where the Indexing Service is located Index Remove failed: %1 Internal reference: %2] <br>e.g.<br> Index Remove failed: Invalid search query. [0xc0041c53]<br> Internal reference: RemoveItemFromIndex Could not get the IndexServer sequence number: %1 Internal reference: %2 <br>e.g.<br> Could not get the IndexServer sequence number: <br> The Alta Vista index is not open [0xc0041c64] <br> Internal reference: GetSequenceNumber Could not delete index: %1 Internal reference: %2 Error whilst deleting the index. Path: %2 Error: %1 The vault is marked as being deleted. Invalid search query. The AltaVista Index is full for Vault ID: 1421B28D8F4222147D54O2DA3AA60FF161110000vault.acme.com <br> No more data can be stored in this Vault. Please create and use a new Vault instead.Unable to read Retention Categories from the Directory. A search containing Expiry Date has not been performed. %1 Cannot open index for Vault %1. This type of Vault does not have its own index. Closing Vault ID: %1 The AltaVista index has reached its capacity. Internal Reference : %2 [%3] e.g.<br> Vault 'NY 10/04/2004_0010' has rolled-over to Vault 'NY 10/04/2004_0011' <p> Internal References: <br> Original VaultID: 110B72360A4D5DA4592CB47BD28ED23C81110000vault.acme.com <br> New VaultID : 1434D84D7102F034BA303613861677AC51110000vault.acme.com <br> ROV [490000000]Query '%1', matching '%2' entries, viewing range '%3' to '%4'

Failed to update the Vault Directory with Vault date-ranges. The Index will not be flushed to disk until this problem is resolved. <br>e.g.<br> Failed to update the Vault Directory with Vault date-ranges. The Index will not be flushed to disk until this problem is resolved. <p> Error code: Access is denied. [0x80070005] Error code: %1 Could not determine the item date range for the Vault: %2 % nError code: %1 This could lead to searches taking longer than expected. Could not find the specified Vault using the Directory Service. Could not find the specified Vault using the Directory Service. Error code: %1 VaultId: %2 When you use an asterisk, you must specify at least three characters of the search term. Client request refused due to insufficient privileges. User %1 does not have permission(s) (%2) to any folder in the Vault with VaultID %3. <p>e.g.<br> Search request refused because the user does not have sufficient permissions to search any folder in the archive. User: ACMECORP\DOWDP <br> Required Permissions: Read<br> Archive: ACME Info <br> Archive Id: 129761B8KIER1BC4A920D385B67BE41C11110000acme.com Abnormal error occurred Error: %1 Reference: %2 Index: %3 Info: %4 %5 %6 <br>e.g.<br> Abnormal error occurred <br> Error: A low level indexing operation has failed<br> Reference: CAVUpdator/OAVI/o(h) <br> Index: 15EY789B40BD32C47921B837977DBB2581110000vault.acme.com <br> Info: The server is alreasy processing a different Index The server is not processing an Index The update thread is not running The Alta Vista index is not open e.g.<br> Failed to commit Index updates to disk. <br> Reason: A low level indexing operation has failed<br> Error: Index Id: [0xc0041c43] <br> Index Id: 43TY212E2BA61EE40A0A1841221C018681110000acme.com<br> Index Path: F:\Indexes\43TY212E2BA61EE40A0A1841221C018681110000acme.com <br> Available Disk Space: 0 KB(0 KB) <br> Number of Items added: 46 <br> Number of Items deleted: 0 <br> Number of new words: 35283 <br> Additional Info: Makestable <br> Vers:1401 Mem Load:9771 (Max:1310720) KB<p>Index Server process failed Index: %1 PID: %2 Exit Code: %3 </p> <p>e.g.</p> <p>ndex Server process failed <br />Index: 1111B301E5F86D54CB5E786646BB175E91110000kvsprod/VolumeSet:512<br />PID: 7936 <br />Exit Code: 3 <br /></p>Search request failed. Reason: %1 Index Id: %2 Requestor: %3 Search Query: %4 Search Arguments: %5 <br>e.g.<br> search request failed. <br> Reason: Operation aborted [0x80004004] <br> Index Id: 1412G54341FDC9C4D883B46D36ED8397F1110000vault.acme.com (share) <br> Requestor: ACME\Dowd<br> Search Query: "subj" 40 "file extensions"<br> Search Arguments: Start: 1 Number: 10, Options:0x10000<br> Schema:0x1fdbfa Format:0 PI: CP: <br> The index has multiple index volume sets but there is no index volume set selected. Index Id: %s The server is unable to access an index volume since it is known to be corrupt. Index Volume Id: %s The server is unable to access an index volume since it is offline. Index Volume Id: %s There is no archive selected. Unknown index volume set. Index Id: %s Index Volume Set Id: %s Unknown index volume. Index Id: %s Index Volume Id: %s The index volume is not a member of the index volume set. Index Id: %1 Index Volume Id: %2 Index Volume Set Id: %3 For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp The selected index volume set or index volume is not loaded. Index Id: %1 Index Volume Set Id: %2 Search target: %3 For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp The query would have been blocked and the application set the 'Do not block query' option. For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp The search timed out. For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp The request was refused due to insufficient privileges. User: %1 Request: %2 Supplementary Info: %3 The caller must be an administrator to perform this operation. For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp The update request was rejected since the last Index Sequence Number does not match the last Index Sequence Number processed. For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp <p>Failed to add item to the index due to failure loading the item's index metadata. Reason: %1 Index Id: %2 Saveset Id: %3 Internal reference: %4 For more information, see Help and Support Center at <a href="http://evevent.veritas.com/rosetta/showevent.asp">http://evevent.veritas.com/rosetta/showevent.asp</a> </p> <p>e.g.&nbsp; Failed to add item to the index due to failure loading the item's index metadata. |Reason: No such interface supported [0x80004002] |Index Id: 213D931093CC94A429D26CADD47E332CA1110000ACME/Volume:7 (MailboxAliasName) |Saveset Id: 128412000000000~200401071308210000~0~138DA8FD60624EB693BA9F1FCC9A22C |Internal reference: XML II load |<br /></p>The index volume is full. Index Volume: %1 Sequence Number: %2 Maximum Location: %3 Number of documents: %4 File size: %5% of maximum size A new index volume has been created. For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp Request to update the index refused. The Index Sequence Number assigned to the request indicates that the request has already been actioned. Index Id: %1 Request: %2 Additional Info: %3 For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp <p>Unable to add the item to the index since it is not currently available from the Storage Service. Reason: %1 Attempt: %2 Index: %3 Saveset Id: %4 Sequence Number: %5 For more information, see Help and Support Center at <a href="http://evevent.veritas.com/rosetta/showevent.asp">http://evevent.veritas.com/rosetta/showevent.asp</a> </p><font size="1"> <p><font size="2">Unable to add the item to the index since it is not currently available from the Storage Service.</font></p> <p><font size="2">Reason: Saveset is temporarily unavailable. Try operation again later. [0x80041b03]</font></p> <p><font size="2">Attempt: 7</font></p> <p><font size="2">Index: 1R4WKFIR5S9A7D74E9344C1942C220A2B111000ACME/Volume:1 (JOURNALVAULT)</font></p> <p><font size="2">Saveset Id: 41D5A0000000000~200305102205190000~0~42025941687F4C16A058C95C64CB495</font></p> <p><font size="2">Sequence Number: 607122</font></p></font>Addition of item to index abandoned. Index: %1 Saveset Id: %2 Sequence Number: %3 All previous attempts to add the item to the index have failed. To prevent further failures the item will not be indexed. For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp Addition of offline item to index abandoned. Index: %1 Saveset Id: %2 Sequence Number: %3 First requested: %4 All previous attempts to retrieve the item from offline storage have timed out. To prevent further delays the item will not be indexed. For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp Deletion of item from index abandoned. Index: %1 Saveset Id: %2 Item Sequence Number: %3 Delete Sequence Number: %4 All previous attempts to delete the item from the index have failed. To prevent further failures the item will remain in the index. For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp Index update abandoned. Index: %1 Update started: %2 All previous attempts to process the update request have failed. To prevent further failures the update is being abandoned. For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp The index volume has been marked as failed. Index Volume: %1 Index Volume Path: %2 Reference: %3 %4 Due to repeated errors accessing the index volume it has been marked as 'failed' to prevent further errors. The index volume will remain inaccessible until it has been repaired. For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp The AltaVista dataset file is missing. For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp Starting index volume update Index Volume: %1 Index Volume Path: %2 Job Id: %3 Job Author: %4 Job Description: %5 For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp Completed index volume update Index Volume: %1 Index Volume Path: %2 Job Id: %3 Job Author: %4 Job Description: %5 Job elapsed time: %6 (hours:minutes:seconds) Processing time: %7 (hours:minutes:seconds) Number of items added: %8 Number of items additions abandoned: %9 Number of items deleted: %10 For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp Aborted index volume update Reason: %1 Aborted by: %2 Index Volume: %3 Index Volume Path: %4 Job Id: %5 Job Author: %6 Job Description: %7 Job elapsed time: %8 (hours:minutes:seconds) Processing time: %9 (hours:minutes:seconds) Number of items added: %10 Number of items additions abandoned: %11 Number of items deleted: %12 For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp The index volume is busy. For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp The index contains too many volume sets for a federated search. Index: %1 Number of Volumes: %2 Maximum number of volumes: %3 For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp The search application requested too many results. Index: %1 Requested number of results: %2 Maximum number of results: %3 For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp Index is currently disabled. Index: %1 For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp Convert to unicode information. %1 For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp Indexing Service is busy. For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp Timed out waiting for an IndexServer to stop. Index: %1 PID: %2 For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp Error writing information to index missing log for Index Volume %1 For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp Index volume update in progress Index Volume: %1 Percentage completed: %2 Estimated time of completion: %3 Index Volume Path: %4 Job Id: %5 Job Author: %6 Job Description: %7 Job elapsed time: %8 (hours:minutes:seconds) Processing time: %9 (hours:minutes:seconds) Number of items added: %10 Number of items additions abandoned: %11 Number of items deleted: %12 For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp

The count of failed items in the log file does not match the number recorded in the directory database. The Indexing service will use the count that is in the log file to update the database. Run the IndexCheck tool against this index volume to ensure that the log file is up to date. Index Volume: %1 Index Volume Path: %2 Log File: IndexMissiing.log Number of failed items in the log file: %3 Number of failed items recorded in the database: %4 For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp There are no more items to read from the failed items log For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp The failed items log appears to be empty, or cannot be read. There are no items to repair For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp The sequence number read from the failed items log does not correspond to the Saveset ID specified in the file. The item will not be repaired. Index Volume: %1 Sequence Number: %2 Expected Saveset ID: %3 Actual Saveset ID: %4 For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp Index volume is full. Cannot index any more repaired items to this volume. Index Volume: %1 For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp Update of indexed item abandoned. Index: %1 Saveset Id: %2 Item Sequence Number: %3 %Update Sequence Number: %4 All previous attempts to update the indexed item have failed. No further attempts will be made to update the item. For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp Could not update indexed item Index Id: %1 Item Id: %2 %Additional Info: %3 For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp Failed to commit Index updates to disk. Reason: %1 Index Id: %2 Index Path: %3 Available Disk Space: %4 Number of Items added: %5 Number of Items deleted: %6 Number of Items updated: %7 Number of new words: %8 Additional Info: %9 %10 For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp Index volume update in progress Index Volume: %1 Percentage completed: %2 Estimated time of completion: %3 Index Volume Path: %4 Job Id: %5 Job Author: %6 Job Description: %7 Job elapsed time: %8 (hours:minutes:seconds) Processing time: %9 (hours:minutes:seconds) Number of items added: %10 Number of items additions abandoned: %11 Number of items deleted: %12 Number of items updated: %13 For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp Aborted index volume update Reason: %1 Aborted by: %2 Index Volume: %3 Index Volume Path: %4 Job Id: %5 Job Author: %6 Job Description: %7 Job elapsed time: %8 (hours:minutes:seconds) Processing time: %9 (hours:minutes:seconds) Number of items added: %10 Number of items additions abandoned: %11 Number of items deleted: %12 Number of items updated: %13 For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp Completed index volume update Index Volume: %1 Index Volume Path: %2 Job Id: %3 Job Author: %4 Job Description: %5 Job elapsed time: %6 (hours:minutes:seconds) Processing time: %7 (hours:minutes:seconds) Number of items added: %8 Number of items additions abandoned: %9 Number of items deleted: %10 Number of items updated: %11 For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp Disabling additions, deletions, and updates because the index location is in backup mode. Index Location: %1 Status: %2 For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp Enabling additions, deletions, and updates because the index location is no longer in backup mode. Index Location: %1 Status: %2 For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp Disabling additions, deletions, and updates to the following index locations because they are in backup mode: %1 Status: %2 For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp None of the index locations is in backup mode For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp The following index locations are in backup mode: %1 For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp Index volume is full. Cannot add new items or update existing items in this volume. Index Volume: %1 For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp There are no index locations. No indexing can take place until an index location has been created. For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp Could not find item in index Index Id: %1 Item Id: %2 %Additional Info: %3 For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp The Vault Directory Service has started (%1). The Vault Directory Service has stopped. Error number is <%1>. Error source is <%1>. Error SQL State is <%1>. Native error is <%1>. Error decoding has found problems reading the Error properties <%1>. Error decoding has found problems reading the Error count <%1>. Error decoding has found problems reading Errors properties <%1>. ADO %1 object released but the objects Reference Count was non-zero. The SQL command that has been issued is: %1. DirectoryConnection: Initialization: DLL_PROCESS_ATTACH received by the DirectoryConnection DLL. DirectoryConnection: Initialization: DirectoryConnection DLL version is: %1. DirectoryConnection: Initialization: open mutexes. DirectoryConnection: Initialization: open sockets. DirectoryConnection: Initialization: get ip address. DirectoryConnection: Termination: DLL_PROCESS_DETACH received by the DirectoryConnection DLL. DirectoryConnection: Termination: close mutexes. DirectoryConnection: Termination: close sockets. %1: Trace: trace set to %2 by client DirectoryService: Initialization: %1 DirectoryService: Method call: %1 DirectoryService: Method call: %1, param (%2) DirectoryService: Method call: %1, param (%2, %3) DirectoryService: Method call: %1, param (%2, %3, %4) DirectoryService: Method call: %1, says %2 DirectoryService: Method call: %1, says %2 and found %3 entries. DirectoryService: Function call: %1 DirectoryService: Function call: %1, param (%2)

DirectoryService: Function call: %1, param (%2, %3) DirectoryService: Function call: %1, param (%2, %3, %4) DirectoryService: ADO: %1 DirectoryService: ADO Pool: %1 thread %2 DirectoryService: ADO Pool: %1 thread %2 number %3 DirectoryService: ADO Pool: Exhausted: %1 thread %2 attempt %3 DirectoryService: ADO Pool: %1 thread %2 number %3 DirectoryService: ADO: Connect: <%1> <%2> <%3> DirectoryService: %1: %2 <br>e.g.DirectoryService: CreateDirectoryService number of tries: : 23 <br>DirectoryService: %1: %2 %3 Failed to obtain token sids. Error: %1 Contact your Support Representative giving full details of your configuration and the actions leading up to this error. DirectoryConnection: %1: %2 DirectoryConnection: %1: %2 %3 Encrypt/Decrypt: %1: %2 DirectoryConnection: Method call: %1 DirectoryConnection: Method call: %1, param (%2) DirectoryConnection: Method call: %1, param (%2, %3) DirectoryConnection: Method call: %1, param (%2, %3, %4) DirectoryConnection: Method call: %1, says %2 DirectoryConnection: Method call: %1, says %2 and found %3 entries. DirectoryConnection: Function call: %1 DirectoryConnection: Function call: %1, param (%2) DirectoryConnection: Function call: %1, param (%2, %3) DirectoryConnection: Function call: %1, param (%2, %3, %4) DirectoryConnection: Logic: Get class id for object %1. DirectoryConnection: Logic: CoCreate a Directory Service object. DirectoryConnection: Logic: CoCreate a Directory Vault object. DirectoryConnection: Logic: Acquire mutex. DirectoryConnection: Logic: Release mutex. DirectoryConnection: Logic: Marshall interface pointer. DirectoryConnection: Logic: Unmarshall interface pointer. DirectoryConnection: Logic: Check pool, %1. Address %2 DirectoryConnection: Logic: Add to pool. Address %1 DirectoryVault: Initialization: DLL_PROCESS_ATTACH received by the DirectoryVault DLL. DirectoryService: Initialization: DirectoryService version is: %1. DirectoryVault: Initialization: DirectoryVault DLL version is: %1. DirectoryVault: Termination: DLL_PROCESS_DETACH received by the DirectoryVault DLL. DirectoryVault: Method call: %1 DirectoryVault: Method call: %1, param (%2) DirectoryVault: Method call: %1, param (%2, %3) DirectoryVault: Method call: %1, param (%2, %3, %4) DirectoryVault: Method call: %1, says %2 DirectoryVault: Method call: %1, says %2 and found %3 entries. DirectoryVault: Function call: %1 DirectoryVault: Function call: %1, param (%2) DirectoryVault: Function call: %1, param (%2, %3) DirectoryVault: Function call: %1, param (%2, %3, %4) DirectoryVault: Logic: Get class id for object %1.

DirectoryVault: Logic: CoCreate a Directory Service object. DirectoryVault: Logic: CoCreate a Directory Vault object. DirectoryService: Trace: trace set to %1 User '%1' attempted to use the Vault Directory Service Admin methods but did not have the correct privileges. The Directory Database username does not exist in the registry. Failed to register the handler for the Vault Directory Service service control requests, error code '%1'. The Vault Directory Service will not be started. This message is generated when registering the Vault Directory Service as an NT Service, a failure occurred when registering the function to handle service control requests. An unknown service control request code of '%1' was received by the Vault Directory Service Failed to create a Directory Connection Interface Pointer pool mutex, reason: '%1'. Failed while waiting for a Directory Connection Interface Pointer pool mutex to signal, reason: %1. Failed while releasing a Directory Connection Interface Pointer pool mutex, reason: %1. Failed while marshalling a Directory Service Interface Pointer, reason: %1. Failed while unmarshalling a Vault Directory Service Interface Pointer, reason: %1. An attempt to allocate memory within the Vault Directory Service component failed. Failed to get the Class ID from the Vault Directory Service Prog ID, reason: %1 Failed to create a Vault Directory Service object on computer '%2', reason: %1 A Vault Directory Service Interface pointer is in use when all pointers are being freed. During system clean up an attempt was made to free all the Vault Directory Service Interface Pointers. One was found that was marked as still being used by a thread. All pointers at this point should be marked as unused. An in-use Vault Directory Service Interface Pointer was not found in the pool. Failed to open an ADO Connection to the database. Failed to create an ADO Connection object. Did not find expected LONG value. Vault Directory Service detected unexpected exception in the Vault ADO Library at %1. An attempt to destroy the record array has failed, reason: %1 An attempt to retrieve an attribute value has failed. Attribute supplied %1. An attempt to set an attribute value has failed. Attribute supplied %1. An attempt to detach a variant from its container object has failed, reason: %1. An attempt to change the type of a variant has failed, reason: %1 A pointer to a block of memory was found to be NULL before it was accessed. A parameter was out of range for the given context. Value supplied %1. A string parameter was found to be empty when a value was expected. The required attribute could not be found within the given attribute list. Attribute supplied %1. An attempt to add an element to a record array has failed, reason: %1 An Interface pointer was found to be invalid during a Set. Failed to get the Class ID from the Directory Vault Prog ID, reason: %1 Failed to create a Directory Vault object, reason: %1 <br />e.g. Failed to create a Directory Vault object, reason: Exception occurred. [0x80020009]Failed to destroy memory for a SafeArray. An unrecognized type of vault object has been found, type: '%1'. The disconnected Recordset could not be closed. Error code '%1'. The disconnected Recordset could not be deleted. Error code %1. The fields within the disconnected Recordset could not be accessed. The construct the disconnected Recordset. Could not create the access object pointer to the Disconnected Recordset. Could not create the access object to the Disconnected Recordset. Could not create a connection to the Disconnected Recordset. The Disconnected RecordSet is not supported as a QI has failed. A request to the Disconnected Recordset move onto the next record has failed. An exception occurred in the Directory Connection object in method '%1'. An exception occurred in the Directory Vault object in method '%1'. An exception occurred in the Vault Directory Service object in method '%1'.

The SID returned by LookupAccountName() was found to be invalid by IsValidSid(). Error returned by GetSidIdentifierAuthority(). Error returned by GetSidSubAuthorityCount(). The SID is greater than the maximum allowed by SQL server. Could not lookup the account %1. The error was: %2 Attempted call to COM function QueryInterface() returned %1 Could not find logon details (username and password) for the Enterprise Vault Directory Database. Caller provided a table (%1) that does not exist in the Vault Directory Database. Caller provided a table (%1) in the Vault Directory Database that expects 0 columns. Values received by Vault Directory Service were not passed in a SafeArray. Too many values were received by Vault Directory Service for table. The Vault Directory Service could not call SafeArrayGetUBound() to process values during an insert or update operation. The Vault Directory Service was passed a SafeArray of the wrong makeup. The Vault Directory Service was passed a SafeArray that contained a variant of an unexpected type. The Vault Directory Service failed to call SafeArrayGetElement() successfully. The Vault Directory Service failed to create an EntryId as it was passed a NULL vault site. The Vault Directory Service failed to create an EntryId as CoCreateGuid() failed. The Vault Directory Service failed to add an entry into the Vault Directory Database. The SQL command was: %1 The Vault Directory Service failed to update an entry in the Vault Directory Database. The SQL command was: %1 The Vault Directory Service failed to delete an entry in the Vault Directory Database. The SQL command was: %1 The Vault Directory Service failed to update the Vault Directory Database as the number of attribute types did not match the number of attribute values. The Vault Directory Service failed to update the Enterprise Vault Directory Database because either the attribute type or attribute value strings could not be parsed. A system string function failed. The Vault Directory Service expected to receive a 2 dimensional SafeArray from the client. An attempt was made to update the primary key of a database entry. This operation is not allowed in the Vault Directory Database. The key was %1. The Vault Directory Service exhausted the list of attributes during Create or Update. The Vault Directory Service successfully completed the %1 operation but failed to release its resources correctly. Failed to initialize the windows sockets system. Reason: The underlying network subsystem is not ready for network communication. Failed to initialize the windows sockets system. Reason: The version of Windows Sockets support requested is not provided by this particular Windows Sockets implementation. Failed to initialize the windows sockets system. Reason: A blocking Windows Sockets operation is in progress. Failed to initialize the windows sockets system. Reason: The limit on the number of tasks supported by the Windows Sockets implementation has been reached. Failed to initialize the windows sockets system. Reason: The lpWSAData is not a valid pointer. Failed to initialize the windows sockets system for an unknown reason. Reason code: %1. Failed to clean up the windows sockets system. Reason: A successful WSAStartup must occur before using this function. Failed to clean up the windows sockets system. Reason: The network subsystem has failed. Failed to clean up the windows sockets system. Reason: A blocking Windows Sockets call is in progress, or the service provider is still processing a callback function. Failed to clean up the windows sockets system for an unknown reason. Reason code: %1. Failed to get the host '%1' using windows sockets. Reason: A successful WSAStartup must occur before using this function. Failed to get the host '%1' using windows sockets. Reason: The network subsystem has failed. Failed to get the host '%1' using windows sockets. Reason: A blocking Windows Sockets call is in progress, or the service provider is still processing a callback function. Failed to get the host '%1' using windows sockets. Reason: Authoritative Answer Host not found. Failed to get the host '%1' using windows sockets. Reason: Non-Authoritative Host not found, or server failure. Failed to get the host '%1' using windows sockets. Reason: Unrecoverable error occurred. Failed to get the host '%1' using windows sockets. Reason: Valid name, no data record of requested type. Failed to get the host '%1' using windows sockets. Reason: The name parameter is not a valid part of the user address space. Failed to get the host '%1' using windows sockets. Reason: A blocking Windows Socket call was canceled through WSACancelBlockingCall. Failed to get the host '%1' using windows sockets for an unknown reason. Reason code: %2. Failed while calling the MultiByteToWideChar function.

Failed while calling the WideCharToMultiByte function. Failed while trying to set the Database Username and Password. Failed while trying to get the Vault Directory Service registry settings. The EnterpriseVault.DirectoryVault object reported an error in GetBinaryValue(). %1 The EnterpriseVault.DirectoryVault object reported an error in GetStringValue() %1 The EnterpriseVault.DirectoryVault object reported an error in GetLongValue() %1 The EnterpriseVault.DirectoryVault object reported an error in SetBinaryValue() %1 The EnterpriseVault.DirectoryVault object reported an error in SetStringValue() %1 The EnterpriseVault.DirectoryVault object reported an error in SetLongValue() %1 The EnterpriseVault.DirectoryVault object reported an error in GetAttributeData() %1 The EnterpriseVault.DirectoryVault object reported an error in SetRequestedAttributes() %1 The EnterpriseVault.DirectoryVault object reported an error in MoveNextRecord() %1 The EnterpriseVault.DirectoryVault object reported an error in SetFirstRecord() %1 The EnterpriseVault.DirectoryVault object reported an error in GetRecordCount() %1 The EnterpriseVault.DirectoryVault object reported an error in SetRecordCount() %1 The EnterpriseVault.DirectoryVault object reported an error in SetRecordsData() %1 The EnterpriseVault.DirectoryVault object reported an error in SetType() %1 The EnterpriseVault.DirectoryVault object reported an error in GetType() %1 The EnterpriseVault.DirectoryVault object reported an error in ExtractAttributeName() %1 The EnterpriseVault.DirectoryVault object reported an error in FreeAllTheElements() %1 The EnterpriseVault.DirectoryVault object reported an error in FindAttribute() %1 The EnterpriseVault.DirectoryVault object reported an error in GetAttributeValue() %1 The EnterpriseVault.DirectoryVault object reported an error in SetAttributeValue() %1 The EnterpriseVault.DirectoryVault object reported an error in CreateSafeArray() %1 The EnterpriseVault.DirectoryVault object reported an error in system call. %1 The EnterpriseVault.DirectoryConnection object reported an error. %1 The EnterpriseVault.DirectoryService object reported an error. %1 <br>e.g.<br> The EnterpriseVault.DirectoryService object reported an error.<br> Failed to create Vault Database Pool Connection. The EnterpriseVault.DirectoryVault object reported an error. %1 <br>e.g.<br> The EnterpriseVault.DirectoryVault object reported an error. <br> A call to the system function SafeArrayGetElement() failed with<br> The parameter is incorrect.<br> Internal reference: GAV<br> Problem connecting to the Vault Directory Service database. Problem disconnecting from the Vault Directory Service database. Problem reading from the Vault Directory Service database. Problem writing to the Vault Directory Service database. Problem acquiring ADO resources. Failed to create a Vault Directory Service Logon mutex, reason: '%1'. Failed to create a Vault Directory Service Logon mutex as it already exists, reason: '%1'. Failed to find the Vault Directory Service Logon mutex. Failed to lock the Vault Directory Service Logon mutex, reason: '%1'. Failed while releasing a Vault Directory Service Logon mutex, reason: %1. The DirectoryService was asked to store a NULL string in the Registry for the database DSN. The DirectoryService was asked to store a NULL string in the Registry for the database username. The DirectoryService was asked to store a NULL string in the Registry for the database password. The Vault Directory Service was asked to store the new logon details but was too busy to perform the operation. The Vault Directory Service can only be run from the Vault Site Account. Error code = %1 The password cannot be changed via this method. The password change will not take effect until the Enterprise Vault Directory Service is restarted. Failed to call the Pause method. Failed to call the UnPause method. Failed to call the SetDatabaseUsernamePassword method.

Failed to generate user group information. Failed to perform encryption. Failed to perform decryption. Failed to perform encoding. Failed to perform decoding. Failed to get user groups with domain group error code %1 and local group error code %2. Failed to get users domain controller name with an error code %1. Failed to get memory for Vault Database Connection Pool. Failed to create a Vault Database Connection Pool mutex, reason: '%1'. The Vault Database Connection Pool mutex does not exist, cannot continue. Failed to acquire the Vault Database Connection Pool mutex. Failed to release the Vault Database Connection Pool mutex. No ADO Pool, cannot continue. No Global Interface Table, cannot continue. This can occur when the Vault Directory Service is stopped whilst it is busy. Cannot create Global Interface Table, cannot continue. Failed to get slot in Vault Database Connection Pool. Failed to put or delete slot in Vault Database Connection Pool. Failed to get slot in Vault Database Connection Pool after prolonged wait. Failed to get data access from slot in Vault Database Connection Pool. NULL data access pointer supplied for slot in Vault Database Connection Pool. Failed to create data access from slot in Vault Database Connection Pool. Failed to store interface in Global Interface Table. Failed to read interface from Global Interface Table. Failed to remove interface from Global Interface Table. Failed to get interface pointer for Vault Database Pool Connection. Failed to create Vault Database Pool Connection. Failed to create Vault Database Pool Command. Failed to create Vault Database Pool Recordset. Failed to delete Vault Database Pool Connection. Failed to delete Vault Database Pool Command. Failed to delete Vault Database Pool Recordset. Failed to set interface pointer for Vault Database Pool Connection. Failed to set interface pointer for Vault Database Pool Command. Failed to set interface pointer for Vault Database Pool Recordset. Failed to get interface pointer for Vault Database Pool slot. Failed to set interface pointer for Vault Database Pool slot. Failed to delete interface pointer for Vault Database Pool slot. DirectoryConnection: RPC Connectivity Logic: %1. DirectoryConnection: Logic: Pool item %1. Address %2 The EnterpriseVault.DirectoryConnection object reported an error. The error code was %1 The EnterpriseVault.DirectoryService object reported an error. The error code was %1 The EnterpriseVault.DirectoryVault object reported an error. The error code was %1 The Vault Directory database already exists. The vault Directory Database does not exist. Failed for an unknown reason, see the Event Log. No support for the SQL Server ODBC driver. Failed to create the directory entry in the database. The Vault Directory database contains configuration information.

The path name for one or both of the specified locations is too long. Failed to create the registry entry for the account password . The name of the Vault Database was not supplied. The name of the Vault Database SQL Data Device was not supplied. The path of the Vault Database Data Device was not supplied. The name of the Vault Database Log Device was not supplied. The path of the Vault Database Log Device was not supplied. The size of the Vault Database Data Device was out of range. The size of the Vault Database Log Device was out of range. The new database password was not supplied. The ODBC Driver was not supplied. The ODBC DSN was not supplied. The ODBC DSN description was not supplied. The ODBC Driver Version was not supplied. The password for the Vault Directory Database was not supplied. The SQL privileged password was not supplied. The path for the Vault Directory Database schema was not supplied. The computer hosting the Vault Directory Database server was not supplied. The privileged SQL login to access the Vault Directory Database server was not supplied. The SQL login "EnterpriseVault" to access the Vault Directory Database server was not supplied. The password supplied is too small. The password supplied is too big. The Enterprise Vault install path cannot be found in the registry. You must re-install Enterprise Vault to correct this problem. The registry key, HKLM\SOFTWARE\Microsoft\MSSQLServer\Setup was not available. If it does exist then ensure it is a string value. If it does not exist then check your SQL Server installation. Failed to create the Vault Directory Database. Check the following: 1. Check the SQL Account and password are correct. 2. There is sufficient disk space on the specified drive. 3. The Enterprise Vault Directory Service is running. 4. ODBC is installed Failed to delete the Vault Directory Database. Failed to set the password. Check the following: 1. The Enterprise Vault Directory Service is running. 2. The "EnterpriseVaultDirectory" ODBC System DSN exists. 3. SQL Server is available. Failed to create the "EnterpriseVaultDirectory" ODBC System DSN for the Vault Directory Database. Failed to gather information from the SQL Database Server. Check the following: 1. The Enterprise Vault Directory Service is running. 2 The "EnterpriseVaultDirectory" ODBC System DSN exists. 3. Check the SQL Account and password are correct. Failed to determine whether the Vault Directory Database is empty. The database must be empty before it can be deleted. Check the following: 1. The Enterprise Vault Directory Service is running. 2. The "EnterpriseVaultDirectory" ODBC System DSN exists. 3. Check the SQL Account and password are correct. A call to the system function SafeArrayGetUBound() failed with %1 Internal reference: %2 A call to the system function SafeArrayGetLBound() failed with %1 Internal reference: %2 A call to the system function SafeArrayGetElement() failed with %1 Internal reference: %2 A call to the system function SafeArrayPutElement() failed with %1 Internal reference: %2 A call to the system function SafeArrayCreateVector() failed with %1 Internal reference: %2 A call to the system function SafeArrayCreate() failed with %1 Internal reference: %2 A call to the system function SafeArrayDestroy() failed with %1 Internal reference: %2 A call to the system function SafeArrayCopy() failed with %1 Internal reference: %2 A call to the system function VariantClear() failed with %1 Internal reference: %2 A call to the system function CComVariant::ChangeType() failed with %1 Internal reference: %2 Failed to get users local domain controller name with an error code %1. Failed to get the local domain name with an error code %1. DirectoryService: Method call: %1, param (%2, %3, %4) The Directory Service cannot be started until the Vault Configuration Program has been run. On the first page of the Vault Configuration Program choose the Update Configuration option The 'Search All Vaults' GroupDomain and GroupName values do not specify an NT global group. %1\%2 Search All Vaults will be disabled until this is corrected. A call to GetDirectoryLocalIPAddresses() failed with an error code of %1. Error opening Default Message Classes data file. Error parsing entry from Default Message Classes data file.

Error making entry for Message Class table. Failed to create a Message Class entry in the Vault Directory database. Failed to populate the Vault Site Account token cache. Error: %1 Contact your Support Representative giving full details of your configuration and the actions leading up to this error. Failed to retrieve a Vault Site account logon token from the cache. Vault Site Alias (%2). Error: %1 Failed to determine if (%2) is a member of the local Administrators group. Error: %1 Contact your Support Representative giving full details of your configuration and the actions leading up to this error. Failed to lookup group Sids for user (%2\\%3). Error: %1 Contact your Support Representative giving full details of your configuration and the actions leading up to this error. Failed to lookup group Sids for user (Sid specified). Error: %1 Contact your Support Representative giving full details of your configuration and the actions leading up to this error. Failed to set security blanket for IDirectoryAdmin interface. Error: %1 Contact your Support Representative giving full details of your configuration and the actions leading up to this error. A call to the system function SafeArrayRedim() failed with %1 Internal reference: %2 Contact your Support Representative giving full details of your configuration and the actions leading up to this error. Error calling CryptAcquireContext %1 [Internal reference %2] Error calling CryptReleaseContext %1 [Internal reference %2] Error calling CryptGetUserKey %1 [Internal reference %2] Error calling CryptGenKey %1 [Internal reference %2] Error calling CryptExportKey %1 [Internal reference %2] Error calling CryptImportKey %1 [Internal reference %2] Error calling CryptDestroyKey %1 [Internal reference %2] Error calling CryptDecrypt %1 [Internal reference %2] Error calling CryptEncrypt %1 [Internal reference %2] CEVEncryption error - null pointer [Internal reference %1] CEVEncryption error - memory allocation [Internal reference %1] CEVEncryption error - no crypto context [Internal reference %1] CEVEncryption error - no user key exchange [Internal reference %1] CEVEncryption error - Calculate Encoded Buffer Size [Internal reference %1] CEVEncryption error - Convert Buffer To BASE64 String [Internal reference %1] CBase64Conversion error - null pointer [Internal reference %1] CBase64Conversion error - memory allocation [Internal reference %1] CBase64Conversion error - encode buffer [Internal reference %1] CBase64Conversion error - decode buffer [Internal reference %1] CBase64Conversion error - more data encode [Internal reference %1] CBase64Conversion error - mode data decode [Internal reference %1] Cryptographic SIGNATURE key generated for user %1 Cryptographic KEYEXCHANGE key generated for user %1 The Vault Store %1 cannot be deleted because a Journaling Service is using one of the vaults. Change the Journaling Service to use another Vault from a different Vault Store. The Vault %1 cannot be deleted because a Journaling Service is using it. Change the Journaling Service to use a another Vault. The SQL Server for the directory database was not specified. Check the Registry Key 'SQLServer Name'. The Directory Database does not exist on the specified SQL Server. This type is not supported. The name of the directory machine cannot be blank. The system failed to determine if the machine is local or remote The system failed to determine if the machine is local or remote (Socket) An error prevented the directory machine being called. An error getting the Dispatch interface prevented the directory machine being called. The 'Uncategorized' retention category has been created. The specified archive does not exist. The specified archive is structured, but does not contain a root archive folder. The specified archive folder does not exist. The specified archive or archive folder does not exist. Failed to create an archive folder.

An error occurred attempting to update the Directory database. Reason: %1 Reference: %2 %3 The Vault Store %1 cannot be deleted because a public folder is using one of the archives. Change the public folder to use an archive from a different Vault Store. The Vault Store %1 cannot be deleted because a public folder auto-enabler is using it. Change the public folder auto-enabler to use another Vault Store. Vault Store '%1' cannot be deleted because it contains archives that are associated with journal mailboxes. Change the Journal Mailbox target to use an archive from a different Vault Store. The archive %1 cannot be deleted because a Journal Mailbox target is using it. Change the Journal Mailbox target to use a another archive. The archive %1 cannot be deleted because a public folder is using it. Change the public folder to use a another archive. The archive %1 cannot be deleted because a File Server Volume is using it. You must delete the volume from Enterprise Vault before you can delete this archive. Vault Store '%1' cannot be deleted because it contains archives that are associated with file server volumes. You must delete these volumes from Enterprise Vault before you can delete this Vault Store. The Vault Store %1 cannot be deleted because a SharePoint Server target is using it. Change the SharePoint Server target to use a different Vault Store. Vault Store '%1' cannot be deleted because it contains archives that are associated with SharePoint Site Collections. You must delete the Site Collections from Enterprise Vault before you can delete the Vault Store. Error occurred with client-driven migration of PST '%1'. %2. Reference: '%3'. Failed to create a record for computer '%1' for client-driven migration. %2. Reference: '%3'. The archive '%1' cannot be deleted because a SharePoint Site Collection is using it. You must delete the Site Collection from Enterprise Vault before you can delete this archive. For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp The Directory Service is waiting for another Directory Service to complete an update of the EnterpriseVaultDirectory database, or waiting to get exclusive access to the EnterpriseVaultDirectory database. Please ensure no applications, for example SQL Enterprise Manager or SQL Query Analyzer, are accessing the EnterpriseVaultDirectory database. %1 For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp The Directory Service was stopped while waiting for an update of the EnterpriseVaultDirectory database to be performed. For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp Failed to reset the EnterpriseVaultDirectory database into multi user access mode. Use a SQL utility, such as Enterprise Manager, to set unrestricted access. For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp Vault Store '%1' cannot be deleted because it is associated with an Organizational Unit. You must assign a different Vault Store to the Orgnaizational Unit before you can delete the Vault Store. For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp The DirectoryEntry table in the EnterpriseVaultDirectory database does not contain one record. For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp The Directory Service has started the automatic upgrade of the EnterpriseVaultDirectory Database. The Directory Service will become fully operational when the upgrade is complete. For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp The Directory Service has completed the automatic upgrade of the EnterpriseVaultDirectory Database. For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp The archive '%1' cannot be deleted because a Lotus Domino Server target is using it. Change the Lotus Domino Server target to use another archive. For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp Vault Store '%1' cannot be deleted because it contains archives that are associated with Lotus Domino Server targets. Change the Lotus Domino Server target to use an archive from a different Vault Store. For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp The upgrade from Services to Tasks is flagged as incomplete, this may mean that the system may not be providing the same function as prior to upgrade. Check the current configuration and logs, once any issues have been resolved re-run the configuration wizard to complete the upgrade For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp The archive '%1' cannot be deleted because a Domino Journal Mailbox target is using it. Change the Domino Journal Mailbox target to use another archive. For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp Vault Store '%1' cannot be deleted because it contains archives that are associated with Domino Journal Mailbox targets. Change the Domino Journal Mailbox target to use an archive from a different Vault Store. For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp An error occurred attempting to perform a security check. Reason: %1 %2 For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp Vault Store '%1' cannot be deleted because it is associated with an Exchange Server. You must assign a different Vault Store to the Exchange Server before you can delete the Vault Store. For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp Vault Store '%1' cannot be deleted because it is associated with an Exchange Provisioning Group. You must assign a different Vault Store to the Exchange Provisioning Group before you can delete the Vault Store. For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp Failed to download the Authorization Store from the directory database. Because of this you can use the Administration Console only from the Vault Service account. For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp Error launching Monitoring Config Utility. Error code: '%1' For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp The Directory Service is running on Windows 2000 and the Windows 2000 Authorization Manager Runtime is not installed. Role Based Administration will not be available until the Windows 2000 Authorization Manager Runtime component is installed. Until then, only users running under the Vault Service Account will be able to administer Enterprise Vault. For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp Vault Store '%1' cannot be deleted because it is associated with a Domino Server. You must assign a different Vault Store to the Domino Server before you can delete the Vault Store. For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp Vault Store '%1' cannot be deleted because it is associated with a Domino Provisioning Group. You must assign a different Vault Store to the Domino Provisioning Group before you can delete the Vault Store. For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp The Enterprise Vault Domino Server '%1' could not be contacted. It has been removed from the list of active servers for domain '%s2'. Ensure that this server can be reached over the network and is operating correctly. The server will be added to the active list shortly after connectivity is restored, or when the Domino server is restarted. If necessary you can increase the connection failure limit by setting the EVDomSvrMaxFailures registry value. See the documentation for further details. For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp Error launching EvAzUtil utility in order to upgrade the roles-based administration database. Error code: '%1' For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp Failed to initialize the roles-based administration database. Error code: '%1' For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp Failed to upgrade the roles-based administration database. Microsoft.Interop.Security.AzRoles.dll (version 1.0.0.0) is not registered on this machine. This file is distributed by Microsoft as part of the Windows 2000 Authorization Manager Runtime. For registration instructions, see the RUNTIME_REQUIREMENTS.txt file. For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp The data is not valid cipher text. For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp Denied access to use the encryption service. For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp Data decryption has failed. Caller: %1 Cipher text: %2 For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp Attempt made to access the KeyStore table in the Vault Directory Database. Caller: %1 For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp Enterprise Vault could not initialize the Lotus Notes runtime. Users will not be able to access their Domino archives until this problem is resolved. Ensure that the Notes client is installed on this computer and restart the Directory Service. For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp Enterprise Vault has checked the following third-party registry setting and found it does not match the third-party's recommendation. Reference : %1 Key : %2 Value Name : %3 Found 1/0 : %4 Value : %5 To achieve best performance from Enterprise Vault, consider setting this value in accordance with the recommendations. For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp The connection to SQL Server could not be established. The connection will be tried repeatedly until the Directory Service is stopped. SQL Server : %1 For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp Error launching FSAReporting Config Utility. Error code: '%1' For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp The Record in the database is not found. For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp The specified archive folder already exists. For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp The archive %1 has been moved and cannot be deleted because it is currently registered as being in use. All client applications must have unregistered their interest with this archive before it can be deleted. For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp

Vault Store '%1' cannot be deleted because it contains archives that have been moved and are currently registered as being in use. All client applications must have unregistered their interest with these archives before you can delete the Vault Store. For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp The Connection already exists ODBC Configuration Object Created ODBC Configuration Object Deleted Configuration Parameters DSN <%1> ODBC Driver <%2> Version <%3> SQLSvrConf: CreateDSN for Database %1 on Server %2 SQLSvrConf: CreateDSN Created Data Source Name SQLSvrConf: CreateDSN Failed to create Data Source Name %1 Error : %2 SQLSvrConf: DeleteDSN for Data Source Name %1 SQLSvrConf: DeleteDSN Failed to delete Data Source Name %1 Error : %2 StorageDBConfig Object Created StorageDBConfig Object Deleted Parameter <%1> Parameter Dump starting for %1 Parameter Dump finished Unable to Create Connection %1 The execution of the transaction failed The Database Component %1 has been associated with an invalid database broker The Database Component %1 failed to successfully complete Create The Database Component %1 failed to successfully complete Update <br>e.g.<br> The Database Component ArchivePoint failed to successfully complete UpdateThe Database Component %1 failed to successfully complete Delete The Storage Component %1 was not added to the Storage Context Record locked by another user Data view differs. Reload object The Data Source Name (DSN) %1 was not created allowing access the SQL Server %2 Unable to create Device %1 on path %2 Unable to create Database %1 on SQL Server %2 Unable to run scripts on SQL Server %2 Script : %3 Error : %1 Unable to add user %1 to Vault Database %2 Unable to Remove database connection Unable to Remove database objects from storage context The function %1 could not create an ADO Connection to the Vault Database '%2' because this context already has an active connection. This warning is generated if the client application attempts to open an ADO connection when one already exists. An exception was detected in '%1' while accessing the Vault Database '%2'. An error was detected while accessing the Vault Database '%2' (Internal reference: %3): %1. An error was detected while accessing the Vault Database '%2' (Internal reference: %3), error code <%1>. SQL Command: %4 <br>e.g.<br> An error was detected while accessing the Vault Database 'EVSales' (Internal reference: ADODataAccess.cpp (CADODataAccess::AddRecord) [lines {336,337}] built Jul 7 11:45:12 2004), error code <0x80040e14>.<br> SQL Command:<br> INSERT INTO Saveset (ArchivePointIdentity,ArchivedDate,IdChecksumHigh,IdChecksumLow,IdDateTime,IdPartition,IdTransaction,IdUniqueNo,IndexSeqNo,ItemSize,RetentionCategoryIdentity,VaultIdentity ) VALUES ( 51,GETDATE(),1922000,0,CONVERT(datetime,'20030827 19:54:37:000',121),6,'30294952-1791-417D-BDE6-290BB3283590',0,238849,26,4,58) Could not close an ADO Connection as it had already been closed. This warning is generated if the client application attempts to close an ADO connection when it has already been closed. Could not create an ADO Command for this context as it already exists. This warning is generated when the client application attempts to Create Command when the object already has a command. Failed ADO operation as required ADO connection object did not exist. Could not create an ADO Recordset for this context because it already exists. This warning is generated if the client application attempts to open an ADO Recordset when one already exists. The requested entry could not be found in the Database. Failed ADO operation as required ADO Recordset object did not exist. No updates have been made to the Database as the entry has not changed. Could not move cursor through an empty ADO Recordset. Did not find expected UNICODE string value. Could not access the properties of a record as the collection had not been opened. Failed ADO operation as required ADO command object did not exist. Failed to modify password for ODBC DSN %1 on computer %2. Failed to modify timeout for Database connection to %1 seconds.

Failed to discover timeout for Database connection. An error was detected while accessing the Vault Database '%2' (Internal reference: %8): Description: %1 SQL Command: %9 Additional Microsoft supplied information: Source: %3 Number: %4 SQL State: %5 Native Error: %6 HRESULT %7 <br>e.g.<br> An error was detected while accessing the Vault Database 'EVTargetedVS' (Internal reference: BT3): <br> Description: <br> [Microsoft][ODBC SQL Server Driver][DBNETLIB]ConnectionWrite (send()). <br> SQL Command: N/A An error was detected while accessing the Vault Database '%2' (Internal reference: %7): Description: %1 SQL Command: %8 Additional Microsoft supplied information: Source: %3 Number: %4 SQL State: %5 Native Error: %6 <br>e.g.<br> An error was detected while accessing the Vault Database 'EVStore1' (Internal reference: ADODataAccess.cpp (CADODataAccess::ExecuteSQLCommand) [lines {1085,1087,1090,1132,1133,1148}] built Dec 9 17:50:56 2003): Description: [Microsoft][ODBC SQL Server Driver][SQL Server]Could not allocate space for object 'JournalArchive' in database 'EVStore1' because the 'PRIMARY' filegroup is full. An error was detected while accessing the Vault Database '%2' (Internal reference: %4), error code <%1>. The SQL database server detected a deadlock while accessing the Vault Database '%2' Description: %1 Additional Microsoft supplied information: Source: %3 Number: %4 SQL State: %5 Native Error: %6 HRESULT %7 SQL Command: %8 Transaction deadlocked. The transaction has exceeded its retry count. An exception occurred in '%1' An error occurred in Database Component Registry for '%1' The SQL Server rejected the database command. If a timeout or deadlock occurred, then the command will automatically be resubmitted and therefore no action is required. %1 The Update procedure failed because Register() had already been called The Update procedure failed because there was no Directory Entry in the Vault Directory Database The Update procedure failed due to an internal error. Internal reference (%1) The Update procedure failed because the table '%1' did not exist. Please restore a backup of the '%2' database and run the Update Procedure again. The Update procedure could not find the table '%1'. Attempting to recover from a previous update. The Update procedure failed because the Vault Install registry key could not be found. Internal reference(%1) The Update procedure failed because the existing Vault Configuration is incomplete. Could not find '%1'. Internal reference(%2) The Data Source Name (DSN) %1 was not created. The DSN allows access to the SQL Server %2 The Data Source Name (DSN) %1 was not deleted. Remove the DSN manually via Control Panel ODBC. The Update procedure failed because the computer name could not be found. Internal reference(%1) Database Service: Connecting to the directory Database Service: Connecting to the directory Database Service: Checking DSN '%1' Database Service: The DSN attribute '%1' has been updated from '%2' to '%3' Database Service: Updating the DSN attribute '%1' failed and was not set to '%2' Database Service: The DSN attribute '%1' has been create and set to '%2' Database Service: Creating the DSN attribute '%1' failed and was not set to '%2' A new DSN has been created. Database '%1', Description '%2', DSN Name '%3' e.g.<br> The SQL database server for EVTargetedVS is not available: Check that the SQL Server is valid and is running <br> Internal reference(BT3) Description: <br> [Microsoft][ODBC SQL Server Driver][DBNETLIB]General network error. Check your network documentation. <br> Additional Microsoft supplied information: <br> Source: Microsoft OLE DB Provider for ODBC Drivers Number: 0x8004d008 SQL State: 08S01 Native Error: 00000011 HRESULT 0x8004d008 %10: ADO Pool: Pool Statistics: Number of pool connections: %1 Number of requests: %2 Number of connection used: %3 Number of requests delayed: %4 Maximum retry: %5 Percentage of requests delayed: %6 Total waiting time: %7 (millisecond) Average waiting time for requests delayed: %8 (millisecond) Average waiting time for all requests: %9 (millisecond) %3: ADO Pool: Pool settings: Registry: DB Connections set to %1 Registry: Connection Waiting time set to %2 The ADO Command object's Parameters collection was NULL. Could not add an ADO Parameter to the Parameters Collection because the Parameter name was of zero length. Could not add an ADO Parameter to the Parameters Collection because a Parameter of the same name already exists. A NULL ADO Parameter was found while enumerating the Parameters Collection. An ADO Parameter was encountered that had an unexpected type. The connection '%1' was lost and has been reconnected (try: %2) <br>e.g.<br> he connection 'EVTargetedVS' was lost and has been reconnected (try: 1) The connection '%1' was lost and the system failed to reconnect (try: %2) e.g.<br> An error was detected while accessing the Vault Database 'EnterpriseVaultDirectory'. If multiple instances of SQL Server exist ensure the correct instance was specified (Internal reference: CC1): <br> Description: [Microsoft][ODBC SQL Server Driver][Shared Memory]SQL Server does not exist or access denied.<br> SQL Command: N/A <br> Additional Microsoft supplied information:<br> Source: Microsoft OLE DB Provider for ODBC Drivers<br> Number: 0x80004005 <br> SQL State: 08001 <br> Native Error: 00000017 <br> HRESULT 0xc0043433<br> The connection '%1' was lost and the system is waiting to reconnect (Thread Id: %2) For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp The SPS Archive service is starting The SPS Archive service for %1 has started (%2) The SPS Archive service for %1 has stopped An exception has occurred. [Internal reference %1] <br>e.g.<br> An exception has occurred.<br> [Internal reference CServiceModule/DIS/e1]<br>You cannot start a running server Failed to start the main server thread due to the following error: %1 Failed to initialize the SPS server named: %1 There are no more items to process At least one of the Item Processor threads has failed

All of the item Processor threads have stopped Failed to start the server worker threads for the SPS server named: %1 The SPS Archive service could not be initialized due to the following error: %1 A failure occurred while creating the service main thread. This may be due to low system resources please close some applications and try again An unrecoverable error has occurred, the service will be shut down The function was passed invalid parameters The slave process for the SPS server named: %1 has failed and will be restarted The slave process for the SPS server named: %1 has failed and will NOT be restarted as it has exceeded %2 restarts in %3 minutes The slave process for the SPS server named: %1 is not responding and will be restarted The slave process for the SPS server named: %1 is not responding and will NOT be restarted as it has exceeded %2 restarts in %3 minutes The slave process for the SPS server named: %1 has requested a restart and will be restarted The slave process for the SPS server named: %1 has requested a restart but will NOT be restarted as it has exceeded %2 restarts in %3 minutes The slave process for the SPS server %1 failed to start The service has not been initialized The SPS service has been configured with an invalid name, "%1". The name should be of the form "EV_[type]_[guid]" where 'type' is S and 'guid' is 48 characters max; for example, EV_S_1234ABCD The schedule interval supplied in the SPS server schedule is invalid, it should be <= 60, its value is %1 The SPS server cannot be contacted, the server may not be available or the server URL is incorrect The SPS workspace: %1 cannot be processed as it does not have a workspace entry id set The SPS workspace: %2 cannot be processed as the following error occurred while synchronizing Vault directory information with the workspace. %1 The SPS workspace: %1 cannot be processed by the SPS archiving service for: %2 as it was enabled in a different vault site to that of the SPS server. Workspace Site Id: %3 SPS Server Site Id: %4 Failed to initialize the SPS server lister object for the SPS server named %1 <br>e.g.<br> Detail: Failed to initialize the SPS server lister object for the SPS<br> Server named TNESB9252 The following folders have exactly the same Vault properties: (a) %1 (b) %2 Possible causes (and their outcome) of this problem: 1) Folder (a) is a copy of (b). A new Vault will be created for the folder (a) 2) Folder (a) has been renamed and a new folder (b) created with the original pathname. The original Vault for folder (a) will no longer have its permissions automatically synchronized and items in this folder may not be available to all its subscribers. A new Vault will be created for both folders (a) and (b). A worker thread in the SPS archiving server named: %1 has failed. The SPS archiving service will attempt to restart the server Failed to read a mandatory attribute named: %1 for the item: %2 Failed to generate an item qualifier, value too large for a 32 bit value Failed to generate a shortcut URL for the item: %1 There is no valid license key installed. The SPS Archiving Service for %1 will not start until you install a license key. See the Administrator Help for information on license keys Your Pilot license has expired. The SPS Archiving Service for %1 will not run until you install a new license key. See the Administrator Help for information on license keys The SPS archive service for %1 failed its prerequisite checks The SPS archive service for %1 failed its prerequisite checks Could not contact the Enterprise Vault directory service The user: %1 permissions could not be synchronized from the folder: %2 to its corresponding vault object as the user could not be looked up Failed to create a temporary .PST file. The location and content of the file 'mapisvc.inf' could be a possible cause of this error. The SPS Pruning Service has started The SPS Pruning Service has stopped The SPS pruning server for: %2 has become unavailable, no further items will be pruned during this run of the archive service. [Internal reference %1] The following item could not be archived due to a communication failure: Name: %1 Folder: %2 Another attempt to archive this item will be made when the SPS Archiving Server next processes this folder. The SPS folder: %1 will not be processed because the vault service account is not a coordinator. The SPS workspace: %1 cannot be processed because the Vault Service Account is not a coordinator. Modify the workspace security settings and add the Vault Service Account as a coordinator. The SPS service cannot start because the required version of MAPI is missing or incorrectly configured on the Enterprise Vault server: To resolve the problem: 1. Stop all Enterprise Vault services and processes that are using MAPI. 2. Ensure that a version of MAPI supplied with Microsoft Outlook 2003 or later is installed and correctly configured on the Enterprise Vault server. 3. Restart the Enterprise Vault services. If the problem persists, see the "Troubleshooting" section of the Enterprise Vault Administration help file for guidelines on how to proceed. For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp The Enterprise Vault SPS Archive service is no longer supported. For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp The Enterprise Vault SPS Pruning Service is no longer supported. For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp The Enterprise Vault File Placeholder service is starting The Enterprise Vault File Placeholder service has started (%1). File System Filter Driver Version (%2). The Enterprise Vault File Placeholder service has stopped An exception has occurred. [Internal reference %1] The Enterprise Vault File Placeholder Service failed to start because the Enterprise Vault file system filter driver is not installed. Failed to create the CDriverRequest object

Failed to create the CDriverRequest thread Failed to create the CDriverRequest thread stop event Failed to write a placeholder file File Name: %1 <br>e.g.<br> Failed to write a placeholder file File Name: i:\shared\newkit\Ie5\Branding.cab Invalid argument passed to method Argument: %1 <br>e.g.<br> Invalid argument passed to method <br> Argument: CPlaceholderSvr::MakeFileAPlaceholder modifiedDate is invalid!Error opening a file File Name: %1 Error downloading file: %2 Url: %3 Error %1 The request has timed out The server response could not be parsed The HTTP request was not redirected All attempts at redirection have failed The redirection requires user confirmation Error in the automatic proxy configuration script A required registry value was located but is an incorrect type or has an invalid value The attempt to connect to the server failed The server is non-SSL The server is requesting client authentication Client authorization is not set up on this computer The connection with the server has been terminated The connection with the server has been reset A password dialog box is in progress The Internet connection has been lost An error was returned from the server Failed due to a security check The requested resource requires Fortezza authentication Move from a non-secure to a secure connection because of a redirect Submission to a secure connection is being redirected to a non-secure connection Change from a secure to a non-secure connection because of a redirect The Certificate Authority that generated the servers certificate is not recognized The request to the proxy was invalid The server name could not be resolved Direct network access cannot be made at this time The request cannot be made via a proxy The designated proxy server cannot be reached SSL certificate contains an incorrect host name The servers SSL certificate has expired The SSL certificate contains errors SSL certificate was revoked SSL certificate is invalid Failed while loading the SSL libraries Account detail required you must supply your account details The Web site or server indicated is unreachable A parameter is missing An unspecified error occurred. Access is denied The web server is available but is not correctly configured for Enterprise Vault The web server responded with error %1 The vault that contained this item no longer exists The item is no longer in the vault An internal error occurred on the web server

Enterprise Vault is currently unavailable. Please try again later Error deleting Vault item file name: %2 Error %1 <br>e.g.<br> Error deleting Vault item, file name: E:\ACME\DATA\STATICS\WHEEL.JPG Error Index Server is busy compacting and cannot handle any update requests [0x80041c07] Error deleting Vault item file name: %2 Url: %3 could not obtain an IStorageOnlineOpns interface Error %1 The Placeholder Service is configured to run under the Local System account. It should be configured to run under the Vault Service Account. The Placeholder Service structure EVAULT_SERVICE_PART_DATA has an incorrect size Downloaded file is not the expected size: Url: %1, Content length: %2 bytes File: %3, Size: %4 bytes <br>e.g.<br> http://uk01.lfc.local/EnterpriseVault/download.asp?VaultID=120B6E2C99D16664C8DD661D2A36CA6FB1110000uk01.lfc.local&SavesetId=199000000000000~200305300846020000~0~A95EFEA3F9274A10BFE41B9FBC56BB3&Request=NativeItem&EVHeaders=1, Content length: 106406912 bytes File: \\?\E:\LARGE_FILES\CENTERA TEST\EVPS_7100_3152_200552011371.tmp, Size: 104857600 bytes The wrong version (%1) of evfsf.sys is installed. Version %2 is required. For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp Files archived with delete on delete and/or delete on recall policy flag as set will be deleted from archive when placeholder is deleted/recalled respectively. This may result in data loss. For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp Failed to read the site default WebApp Url. For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp Enterprise Vault has disabled pass-through recall because the cache cleanup thread failed to start. Error: %1 For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp Failed to created for pass-through recall request threads. For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp Failed to determine whether to delete an archived file following the deletion of its placeholder. The archived item will not be deleted. For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp Failed to update the "Delete archived file when placeholder is deleted" cache. The archived item will not be deleted when its placeholder is deleted. For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp Updated the "Delete archived file when placeholder is deleted" cache with information from the volume or folder policy. For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp Failed to create the thread for updating the "Delete archived file when placeholder is deleted" cache. The archived item will not be deleted when its placeholder is deleted. For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp The thread for updating the "Delete archived file when placeholder is deleted" cache failed. The archived item will not be deleted when its placeholder is deleted. For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp Error occured while computing hash, Error: (%1), File: (%2). For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp %1 service started For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp %1 service stopped For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp Handler not installed For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp Cannot set service stop event For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp Bad service request For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp Cannot create service stop event For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp Computer not found in Active Directory For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp Active Directory search error: %1 For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp Cannot get object from Active Directory: %1 For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp Cannot get computer name. Error: %1 For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp It took %1 milliseconds to scan %2 For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp Cannot load string resource '%2'. Error: %1 For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp Cannot get registry entry for '%2'. Error: %1 For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp Cannot open registry key '%2'. Error: %1 For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp Saving to %1 For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp Data collection parameters mismatch. This agent's parameters are DAYSOLD=%2, MBLARGE=%1. Data collection repository's parameters are DAYSOLD=%3, MBLARGE=%4. For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp Error in GetDiskFreeSpace: %1 For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp Error in GetDiskFreeSpaceEx: %1 For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp Error in GetVolumeInformation: %1 For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp Cannot get IQuotaAdvisor for server '%2'. Error: %1 For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp Cannot get quotas. Error: %1 For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp Cannot get quota count. Error: %1 For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp Cannot convert date to system time. Error: %1 For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp Cannot format date For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp Error getting server information: %1 For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp Cannot open data source connection. Error: %1 For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp Allocating socket failed. Error: %1 For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp Unable to get the host name. Error: %1 For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp Connecting to Data Server failed. Error: %1 For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp Sending data to the server failed. Error: %1 For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp Failed to write data to XML file. Error: %1 For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp

Scan failed on: %2. Error %1 For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp Setting up scan failed. For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp Saving scan data failed. For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp Cannot save Drive Usage. Error: %1 For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp Cannot save SID Usage. Error: %1 For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp Cannot save File Type Usage. Error: %1 For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp Cannot save Real Time Data. Error: %1 For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp Cannot save User Data. Error: %1 For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp Cannot save data. Error: %1 For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp Active Directory type not supported: %1 For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp Failed while receiving data from the server. Error: %1 For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp Invalid type for item %2: %1 For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp WSAStartup failed. Error: %1 For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp Received incomplete request for user attributes. For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp Malformed XML in user attribute request. For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp User information buffer capacity exceeded. Too many users or attributes. For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp Invalid schedule start time for server %1, drive %2: %3. For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp Scan of %1 started. For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp Unable to verify license key. Please contact your distributor. For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp Unable to verify Managed Server license key. Contact your distributor to obtain a Managed Server license key. For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp Error in remote shell code: %1 For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp Error saving agent settings: %1 For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp Error loading agent settings: %1 For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp Error saving agent settings: %1 For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp Property '%1' of user %2 is missing. You might have Active Directory access problems. For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp Out of memory in %1. For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp Error getting path for share %1: %2 For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp Error getting configuration from FSAReporting web server: %1 For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp It took %1 milliseconds to format and save data of %2 For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp Error obtaining archive information of the drive %2: %1 For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp The following files had at least one invalid date: %1 The date on the file has not been changed. In the FSA Reporting database, Enterprise Vault has used the most appropriate of the following dates for the file: %t01-Jan-1753 %t31-Dec-9999 For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp Scan of %1 completed. For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp Scan of %1 stopped. For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp Started sending metadata for %1 to server. Server name %2. For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp Sending metadata for %1 to server completed. Server name %2. For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp Sending metadata to server failed for %1. Server name %2. For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp Started sending scanned data for %1 to server. Server name %2. For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp Sending scanned data for %1 to server completed. Server name %2. For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp Sending scanned data to server failed for %1. Server name %2. For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp Started getting archive information for \\%1\%2. For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp Completed getting archive information for \\%1\%2. For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp Failed to get archive information for \\%1\%2. For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp Archive information for reporting object : \\%1\%2 is empty. This could be either because of no data archived from this drive or there is an error while getting the archive information. For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp Scan for %1 is in progress. Number of files scanned = %2. For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp Started getting archive point information for \\%1\%2. For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp Completed getting archive point information for \\%1\%2. For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp The FSAReportingService process will be shut down because there is insufficient disk space on drive %1. Delete any unwanted files from the drive and then restart the process as follows. On file servers on which the FSA Agent is installed, restart the Enterprise Vault File Collector Service. Otherwise, restart the Enterprise Vault Admin Service on the Enterprise Vault server. For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp Failed to get archive point information for \\%1\%2. For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp

FSA Reporting cannot work on this file server. The version of Enterprise Vault that is on the Enterprise Vault server is older than the version of the FSA Agent that is on this file server. Upgrade the Enterprise Vault server to a compatible version. For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp Failed to get server information for server %1, target volume %2 For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp Failed to get path for target volume %1, server %2 For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp Failed to create entry in the FSA Reporting database for target volume %1, server %2 For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp FSA Reporting scan cancelled while waiting for archive point information for server %1, target volume %2 For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp Error occurred while waiting for archive point information. Error %3, server %1, target volume %2 For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp Failed to scan real-time data for server %1, target volume %2 error %3 For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp FSA Reporting scan cancelled while scanning drive %1, server %2 For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp Failed to scan drive %1, server %2 For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp Failed to create metadata file for target volume %1, server %2 For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp Failed to create scan data file for target volume %1, server %2 For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp Failed to write the XML header to the scan data file for target volume %1, server %2 For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp Failed to write the XML footer to the scan data file for target volume %1, server %2 For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp Failed to clear previous scanned data while scanning target volume %1, server %2 For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp Scan failed for target error %1, volume %2 For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp FSA Reporting scan cancelled after scanning target volume %1, server %2 For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp Error occurred while waiting for the archive thread to complete. Error %1, target volume %2, server %3 For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp Error %1 occurred while saving scanned data for target volume %2, server %3 For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp Failed to write metadata for target volume %1, server %2 For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp Failed to queue data for bulk upload for target volume %1, servername %2 For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp Started bulk upload of data for target volume %1, server %2 For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp Completed bulk upload of data for target volume %1, server %2 For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp Failed to get schedule for local server For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp Failed to stop scan for localhost For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp Failed to obtain DNS name associated with localhost during configuration changed For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp Failed to set the configuration parameters For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp TimerProc scan object count greater than total number of reporting objects for server %1 drive %2 For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp TimerProc configuration change is pending for server %1 drive %2 For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp ScanThread failed to start scanning for server %1 For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp Failed to get volume local path for volume %1 on server %2 For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp Started bulk upload of data for target volume %1, server %2 For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp Completed bulk upload of data for target volume %1, server %2 For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp File %1 created to store scan data for target volume %2, server %3 For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp File %1 created to store user data for target volume %2, server %3 For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp File %1 created to store hierarchy information for target volume %2, server %3 For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp Failed to open the registry key 'Reporting' at 'HKEY_LOCAL_MACHINE \Software\KVS\Enterprise Vault\FSA'. FSAReportingService.exe will stop. FSA Reporting cannot scan this computer. For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp The send of hierarchy data to the Enterprise Vault server failed for volume %1. File server %2. For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp The Enterprise Vault File Blocking service has started. For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp The Enterprise Vault File Blocking service has stopped. For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp Bad Service request For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp Handler not installed For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp %1 For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp %1 For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp %1 For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp %1 For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp GetUserName API failed. Reason: %1 For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp Failed to get user SID for user %2. Reason: %1 For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp Failed to send SNMP trap, check that SNMP service is installed and running. SNMP notification not sent For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp

%1 For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp Error reading from MailSlot For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp %1 For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp %1 For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp Failed to send email with following details: To:%1 From:%2 Subject:%3 Reason:%4 For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp Failed to send email, unknown exception For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp Failed to quarantine file %2 to location %3. Reason: %1 For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp Could not read Exchange Server and Exchange Server user name from registry. No email notification sent. For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp Could not update the local registry cache with file blocking targets and registry information. Reason:%1 For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp Could not update the local registry cache with file blocking targets and registry information. Unknown exception For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp Successfully updated the local registry cache with file blocking targets and registry information. For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp Error moving file %2 to centralized quarantine location %3. Error code: %1. For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp Error Creating folder %1 at centralized quarantine location %2. Error code: %1. For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp EVSVR has detected a zero byte file. For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp A Centera Clip could not be found. For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp EVSVR has detected an ERROR_PATH_NOT_FOUND error and has verified that this error is not due to a device error. The path is not found. For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp EVSVR has detected that the RefCount of a SISPart is wrong. For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp EVSVR has detected a SISPart with a zero RefCount. For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp EVSVR has deleted a SISPart with a zero RefCount. For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp Failed to upgrade slot to Full Sync status For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp Enterprise Vault could not migrate an item from a PST to an archive. Check the migration report once the migration has completed. PST: %1 Subject: %2 Folder: %3 Archive Name: %4 Archive ID: %5 Error: %6 For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp The version of Saveset is not supported. For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp A Clip missing from the Primary Centera exists on the Replica Centera. For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp DXL to EVNotestream format conversion failed. For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp The EVSVR initial operation checks failed. No processing was done. Refer to the EVSVR log file for more information. For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp There was an error verifying a Partition Network Share. Error: %1 Details of the last partition that was processed: VaultStore: %2 Partition: %3 Partition Root Path: %4 Secondary Storage Location: %5 For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp EVSVR has found that a cached copy of a missing file still exists. For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp Service started.\n[Version: {0}]Service stopped.Service paused.Service resumed.Waiting for debug.....\n({0:d} seconds remaining)..... continuing after debug wait.A program fault has raised an exception.\n\nException: {0}\nDiagnostic: {1}\nType: {2}\nReference: {3}\n\nCommand Line: {4}\nApplication Domain: {5}\nProcess Id: {6}\nThread Id: {7}\nStack Trace: {8}{0} - Restarting failed process.\n\nThe process has failed abnormally and will be restarted automatically.{0} - Process failed.\n\nThe process has failed abnormally and will not be restarted since it has exceeded its restart count. The process can be restarted by pausing and continuing the Server Manager Service.Unable to access Configuration File settings.\nFile: {0}\nSection: {1}\nReason: {2}Invalid configuration setting\nFile: {0}\nSection: {1}\nSetting: {2}\nValue: {3}\nReason: {4}{0} - Process shutdown started.\n\nThe process managing this process has terminated leaving this process in an unmanageable state. The process is stopping automatically.The file server process for {0} has shutdown.\n\nThere is no valid license key installed.\n\nSee the Administrator Help for information on license keysAn item references an unknown Retention Category Identity. The site default Retention Category will be used instead.\n\nItem: {0}\nRetention Category Identity: {1:d}\nDefault Retention Category: {2}Unable to access the Directory Service on {0}.\n\nCheck that the Directory Service is running. The process will automatically continue normal operation as soon as the Directory Service becomes available.Unable to access the Directory Service on {0}.\n\nCheck that the Directory Service is running.The file server volume {0} has no Archive points associated.\n\n No items will be archived for this volume.\n\nSee the Administrator Help for information on configuring file server volume archive points.The Archive with id: {0} associated with the Archive Point: {1} is full.\n\n No more items will be stored in this archive\n\nSee the Administrator Help for more information.The Archive Point information for folder: {0} could not be written due to the following error: {1}.\n\n This folder and its subfolders will be excluded from archiving\n\nSee the Administrator Help for more information.The Archive Point information for folder: {0} could not be written as access was denied.\n\nThis folder and its subfolders will be excluded from archiving\n\nSee the Administrator Help for more information.The folder attributes for the folder: {0} could not be accessed due to the following error: {1}.\n\n This folder and its subfolders will be excluded from archiving\n\nSee the Administrator Help for more information.

The folder attributes for the folder: {0} could not be accessed as access was denied.\n\nThis folder and its subfolders will be excluded from archiving\n\nSee the Administrator Help for more information. <BR>E.G.<BR> The folder attributes for the folder: \\users\e$\vol5\DOWDEP\Car\ could not be accessed as access was denied. This folder and its subfolders will be excluded from archiving See the Administrator Help for more information. The Vault Service Account does not have write access to the volume share: {0} or the volume is unavailable, no items for this volume will be processed\n\nSee the Administrator Help for more information.Starting to process file server: {0}. <br>e.g.<br> Starting to process file server: \\NYFILES01. Starting to process file server: {0} in report mode.Starting to process the file server volume: {0}.Starting to process the file server volume: {0} in report mode.Completed processing file server: {0}.Completed processing file server: {0} in report mode.Completed processing the file server volume: {0}.Completed processing the file server volume: {0} in report mode.Starting a synchronization run for file server: {0}.Completed a synchronization run for file server: {0}.Starting a pruning run for computer: {0}.Starting a pruning run for computer: {0} in report mode.Completed a pruning run for computer: {0}.Completed a pruning run for computer: {0} in report mode.Archiving of the file server: {0} has stopped due to a fatal error from the storage API, error: {1}.The number of items pending indexing has grown above the threshold limit. Archiving for file server {0} will pause for 1 minute to allow the backlog to clear.The indexing backlog has cleared, archiving for file server {0} will resume.The SharePoint task '{0}' has startedThe SharePoint task '{0}' has started in report modeThe SharePoint task '{0}' has completedThe SharePoint task '{0}' has completed in report modeThe SharePoint task '{0}' has started to process the site collection '{1}'The SharePoint task '{0}' has started to process the site collection '{1}' in report modeThe SharePoint task '{0}' has completed processing the site collection '{1}'The SharePoint task '{0}' has completed processing the site collection '{1}' in report modee.g.<br> There are 5000 savesets that have not yet been backed up or replicated for Vault Store 'Default'. Review your procedures and make any changes needed to ensure that backups happen in a timely fashion. If you are using an EMC Centera, check the size of the Centera replication queue. The SharePoint task '{0}' failed to auto-enable Site Collections for the SharePoint server {1}\n{2}The SharePoint task '{0}' failed to auto-enable the Site Collection {1} for the SharePoint server {2}\n{3}The SQL database for Vault Store '{0}' has not been backed up for {1} days. The information in this database is at risk until the database has been backed up.\n\nReview your SQL database backup procedures and make any changes needed to ensure that backups happen in a timely fashion.The SQL database transaction log for Vault Store '{0}' has not been backed up for {1} days. The information in this database is at risk until the database has been backed up.\n\nReview your SQL database backup procedures and make any changes needed to ensure that backups happen in a timely fashion.The SQL database transaction log for Vault Store '{0}' has used {1}% of its allocated space.\n\nThe information in this database is at risk until the database has been backed up.\n\nReview your SQL database backup procedures and make any changes needed to ensure that backups happen in a timely fashion.\n\nEnsure that your database is adequately sized for the transactions taking place during an archive run.\n\nAlso check that there is enough disk space available to accommodate any growth in your database and database transaction log files.The Enterprise Vault Directory database has not been backed up for {0} days. The information in this database is at risk until the database has been backed up.\n\nReview your SQL database backup procedures and make any changes needed to ensure that backups happen in a timely fashion.The SQL database transaction log for the Enterprise Vault Directory database has not been backed up for {0} days. The information in this database is at risk until the database has been backed up.\n\nReview your SQL database backup procedures and make any changes needed to ensure that backups happen in a timely fashion.The Directory database transaction log has used {0}% of its allocated space.\n\nThe information in this database is at risk until the database has been backed up.\n\nReview your SQL database backup procedures and make any changes needed to ensure that backups happen in a timely fashion.\n\nEnsure that your database is adequately sized for the transactions taking place during an archive run.\n\nAlso check that there is enough disk space available to accommodate any growth in your database and database transaction log files.Failed to load the sub site targets for the site collection '{0}'\n{1}The number of items pending indexing has grown above the threshold limit. Archiving for SharePoint task '{0}' will pause for 1 minute to allow the backlog to clear.The indexing backlog has cleared, archiving for SharePoint task '{0}' will resume.Archiving for the SharePoint task '{0}' has stopped due to a fatal error from the storage API, error: {1}.There are&nbsp;513935 savesets that are waiting to be indexed and/or waiting to be backed up or replicated in Vault Store 'EXUSNY2'. Check that your Indexing and Storage services are running. Review your procedures and make any changes needed to ensure that backups happen in a timely fashion. If you are using an EMC Centera, check the size of the Centera replication queue.There are&nbsp;XX index delete operations that have not yet been committed to disk for Vault Store '{1}'. Check that the Storage Service is running.There are {0} items pending restoration for Vault Store '{1}'.\n\nCheck that the StorageRestore process is running.\n\nIf necessary, slightly increase the number of Restore processes or threads. The settings are on the Advanced tab of the Storage Service's properties. The {0} process could not be started due to the following error:\n\n{1}\n\nCheck the privileges on the account that launched the process.The EVCustom web service on SharePoint server '{0}' version {1} does not match the archiving task version {2}. \n\nCheck that the Enterprise Vault components have been installed correctly on this SharePoint server.Error contacting the SharePoint server '{0}' \n{1} \n\nCheck that the server is running and that the Enterprise Vault components have been installed correctly on this SharePoint server.PST Migration Report {0}Enterprise Vault Event Log is full.\n\nEvents will be written into the Application Event Log\nuntil space is available in the Enterprise Vault Event Log.

Enterprise Vault Converters Event Log is full.\n\nEvents will be written into the Application Event Log\nuntil space is available in the Enterprise Vault Converters Event Log.Items from this folder and subfolders cannot be archived.\n\nReason: {0}\n\nFolder: {1}The task '{0}' has started processing.The task '{0}' has completed.The task '{0}' has failed to start. {1}The task '{0}' has stopped due to an error. {1}The SharePoint task '{0}' has shutdown because there is no valid license key installed.\n\nSee the Administrator Help for information on license keysUnable to start the FilterController\n\nThe following error occurred:\n\n{0}Error processing external filter\n\n{0}The Domino Journal task '{0}' has started in report mode.The Domino Journal task '{0}' has started.The Domino Journal task '{0}' has completed in report mode.The Domino Journal task '{0}' has completed.Archiving of the Domino server: {0} has stopped due to a fatal error from the storage API, error: {1}.The number of items pending indexing has grown above the threshold limit. Journaling for server {0} will pause for 1 minute to allow the backlog to clear.The indexing backlog has cleared, archiving for Domino server {0} will resume.The File Server Archive Manager cannot start because the required version of MAPI is missing or incorrectly configured on the Enterprise Vault server:\n\nTo resolve the problem:\n\n1. Stop all Enterprise Vault services and processes that are using MAPI.\n2. Ensure that a version of MAPI supplied with Microsoft Outlook 2003 or later is installed and correctly configured on the Enterprise Vault server.\n3. Restart the Enterprise Vault services.If the problem persists, see the "Troubleshooting" section of the Enterprise Vault Administration help file for guidelines on how to proceed.Task '{0}', Thread '{1}' has been asked to shut down due to the following exception {2}Task: '{0}'\n\nUnable to initialize Lotus session.\n\nEnsure you have the Lotus Client installed with valid registry entries.Task: '{0}'\n\nUnable to connect to Domino server: '{1}'Task: '{0}'\n\nUnable to open Domino database: '{1}'Task: '{0}'\n\nUnable to initialize Names and Address Book (NAB) session for Domino server: '{1}'Unable to reopen the Domino database.Unable to open Note Id '{0:x}' within Domino database {1}.Unable to extract attachment '{0}' (NoteId:{1:x}, Database:{2}) to stream.Unable to replace attachment '{0}' (NoteId:{1:x}, Database:{2}) with a stub.Unable to locate the attachment '{0}' (NoteId:{1:x}, Database:{2}) within DXL.Unable to delete Note Id '{0:x}' from Domino database:{1}.Unable to create expanded recipients distribution list for Note Id '{0:x}' in Domino database: {1}.The following item cannot be processed:\n{0}Task: '{0}'\n\nUnable to switch to Lotus Id file '{1}'Task: '{0}'\n\nUnable to open database '{1}' due to access control list for user '{2}'Task: '{0}'\n\nUnable to update access control list for database '{1}' as user '{2}'Task: '{0}'\n\nUnable to extract attachments from {1}:{2} to location '{3}'{0}: Process Manager URL has been omitted due to the following exception:\n{1}Storage Service has stopped. Journaling for server {0} has been suspended.Storage Service started. Journaling for server {0} has resumed.The Lotus Journaling task '{0}' has shutdown because there is no valid license key installed.\n\nSee the Administrator Help for information on license keysThe Lotus Journaling task '{0}' cannot journal items from server '{1}' due to an unsupported journal configuration.\n\nSee the Administrator Help for supported journal configurations.Task: '{0}'\n\nDuplicate attachment detected whilst processing item '{1}:{2}', removed duplicate attachment '{3}'The file system volume {0} is full.\n\n No items will be archived for this volume.<p>File archiving on {0} reported {1} errors. See report file for details. </p> <p>e.g.</p> <p>File archiving on <a href="file://\\filesrv1.daa.bankuk.com">\\filesrv1.daa.bankuk.com</a> reported 4148 errors. See report file for details. <br /><br /></p>Started.\nPlease see the report file {0} for more details.Stopped.\nPlease see the report file {0} for more details.\nExit status:{1}There is a problem with the configuration: '{0}'The indexing backlog has cleared, import will resume.The number of items pending indexing has grown above the threshold limit. Import will pause for 1 minute to allow the backlog to clear.Import aborted by user (Ctrl-C or similiar pressed).

Another instance of FSADLMImport was detected. Aborting this instance.EnterpriseVault is in read-only mode so import is not possible. Aborting this instance.More files found ({0}) then configuration allows to be processed ({1}). Using the lower figure.New archive '{0}' created for '{1}'.Their is a problem with the archive required for storing the file '{0}' and the storage service can not use it.\nIt will be marked unavailable.\nThe associated error is: {1}.The storage service can not archive any more items due to the following error:{0}.\nThe import will stop!The error '{1}' occurred moving the file '{0}' to the failed import directory.Number of files imported:{0}\nNumber of files failed to import:{1}\nNumber of files not attempted to import:{2}\nNumber of new archives created:{3}\nTime taken:{4}The Lotus Journaling task '{0}' Unable to decrypt note:{1:x}, Database:{2}.\n\nYou cannot access portions of this document because it is encrypted and was not intended for you, or you do not have the decryption key.The Lotus custom filter '{0}' has started.The Lotus custom filter '{0}' has stopped.The Lotus custom filter '{0}' failed to process an item.\n\nReason: {1}The custom properties definition file could not be found - custom property indexing and categorisation functionality has been disabled.The custom properties definition file failed to load correctly. Validate this file against the schema definition and correct any errors.\n\nReason: {0}Out of range task entry setting\nId: {0}\nSetting: {1}\nValue: {2}\nMin: {3}, Max:{4}\nUsing default: {5}The Domino Mailbox Archiving task '{0}' has started in report mode.The Domino Mailbox Archiving task '{0}' has started.The Domino Mailbox Archiving task '{0}' has completed in report mode.The Domino Mailbox Archiving task '{0}' has completed.The following Domino mailbox has not been synchronized within {0} days.\n\nMailbox: {1}\n\nThere maybe a problem with the synchronisation process.Multiple Enterprise Vault profile documents were located within a Domino mailbox.\n\nDetails: {0}Multiple '{0}' records located in Mailbox Information Table for mailbox: {1}The file cache is full, you may need to increase the size of the cache and restart the admin serviceUnable to open database '{0}'\n\nDetails: {1}Unknown mailbox state of {0} for mailbox '{1}'The Exchange mailbox provisioning task has started.\n\nTask: {0}\n\nDomain: {1}The Exchange mailbox provisioning task has started in report mode.\n\nTask: {0}\n\nDomain: {1}The Exchange mailbox provisioning task has completed.\n\nTask: {0}\n\nDomain: {1}The Exchange mailbox provisioning task has completed in report mode.\n\nTask: {0}\n\nDomain: {1}The Exchange mailbox provisioning task was aborted during processing. Unprocessed mailboxes do not have the latest policy settings, and any new mailboxes that were not processed cannot be enabled.\n\nRun the task again.\n\nTask: {0}\n\nDomain: {1}The Exchange mailbox provisioning task found a new mailbox with an existing entry in the Enterprise Vault database. The mailbox GUID does not match the entry in the database.\n\nTask: {0}\n\nMailbox: {1}\n\nSet the SynchInMigrationMode registry value in order to process this mailbox. See the documentation for further details.{0}The Exchange mailbox provisioning task linked a new mailbox to an existing entry in the Enterprise Vault database.\n\nTask: {1}\n\nNew mailbox: {2}\n\nExisting entry: {3}\n\n{4}{0}The Exchange mailbox provisioning task created a new entry in the Enterprise Vault database for a new mailbox that had an existing entry in the database. The existing entry has been renamed.\n\nTask: {1}\n\nNew mailbox: {2}\n\nExisting entry renamed to: {3}\n\n{4}The Exchange mailbox provisioning task failed during provisioning group processing. The task has stopped.\n\nTask: {0}\n\nDomain: {1}\n\nProvisioning group: {2}\n\nGroup member: {3}\n\nError: {4}\n\nTrace: {5}<p>The Exchange mailbox provisioning task failed during processing of a mailbox. The task is continuing. Task: {0} User: {1} Mailbox: {2} Provisioning group: {3} Group member: {4} Error: {5} Trace: {6} </p> <p>e.g.</p> <p><font face="Courier New" size="4">The Exchange mailbox provisioning task failed during processing of a mailbox. The process will continue.<br /><br />Error: SqlDateTime overflow. Must be between 1/1/1753 12:00:00 AM and 12/31/9999 11:59:59 PM.</font> </p>Task: '{0}'\n\nUnable to get Lotus Domino client directory location.\n\nEnsure you have the Lotus Client installed with valid registry entries.The Domino Mailbox Policy Synchronization task '{0}' has started in report mode.The Domino Mailbox Policy Synchronization task '{0}' has started.The Domino Mailbox Policy Synchronization task '{0}' has completed in report mode.The Domino Mailbox Policy Synchronization task '{0}' has completed.The Domino Mailbox Policy Synchronization task '{0}' has been requested to stop.The Domino Mailbox Policy Synchronization task '{0}' has been aborted.No Domino domain associated with the specified task '{0}'Monitoring Configuration Utility started with command '{0}'Monitoring Configuration Utility completed successfully. Exit code {0}. Additional info: {1}Monitoring Configuration Utility completed unsuccessfully. Exit code {0}. Additional info: {1}Monitoring Configuration Utility reported error: {0}Starting EMC Celerra delete archived file for deleted placeholder run for task: {0}.

Completed EMC Celerra delete archived file for deleted placeholder run for task: {0}.The Exchange mailbox provisioning task found some mailboxes that are not eligible for processing by this task.\n\nThis task will process mailboxes on every Exchange Server in this domain that has been added to the Administration Console.\n\nIf you want this task to process such mailboxes, add the host Exchange Server to the Administration Console.\n\nSee the provisioning task report for further details.\n\nTask: {0}\n\nDomain: {1}The Exchange mailbox provisioning task failed to queue a mailbox synchronization request. See the provisioning task report for further details.\n\nTask: {0}\n\nDomain: {1}The Exchange mailbox provisioning task failed to initialize mailbox synchronization. Ensure that the Enterprise Vault archive tasks that process Exchange Servers in this domain are operating correctly.\n\nTask: {0}\n\nDomain: {1}\n\nError: {2}The Exchange mailbox provisioning task failed to read required information from Active Directory. The task has stopped. Ensure that the Active Directory server is operational and the account the task is using to log on has read access to the required objects. Then run the task again.\n\nTask: {0}\n\nDomain: {1}\n\nProvisioning group: {2}\n\nGroup member: {3}\n\nAD server: {4}\n\nError: {5}No provisioning groups are defined. Define some provisioning groups and run the provisioning task again.\n\nTask: {0}\n\nDomain: {1}The folder: '{0}' is inside a system folder, no items will be processed for archiving.The Exchange mailbox provisioning task failed to read required information from an Active Directory object. The task has stopped. Ensure that the account the task is using to log on has read access to the object and that the object has the required properties. Then run the task again.\n\nTask: {0}\n\nDomain: {1}\n\nProvisioning group: {2}\n\nGroup member: {3}\n\nAD server: {4}\n\nError: {5}<p>e.g.</p><font size="1"> <p><font size="3">The Exchange mailbox provisioning task found enabled mailboxes that are not part of a provisioning group. These mailboxes cannot be archived. If you do not want these mailboxes to be archived, use the Administration Console to disable them. See the provisioning task report for further details (full reports only).</font></p> <p><font size="3">Task: Exchange Provisioning Task for enterprise.veritas.com</font></p> <p><font size="3">Domain: enterprise.acme.com</font></p></font>{0}: Archive point created succesfully.\n\nTask: {1}{0}: Archive point creation failed. Additional info: {1}\n\nTask: {2}{0}: Archive point creation failed. Additional info: Archive Point is present on one of its parent folder.\n\nTask: {1}There is insufficient diskspace to continue processing on drive {0}Starting EMC Celerra delete archived file for deleted placeholder run for task: {0} in report mode.Completed EMC Celerra delete archived file for deleted placeholder run for task: {0} in report mode.The Exchange mailbox provisioning task failed to process a mailbox store. Mailboxes on this store have not been provisioned.\n\nCheck that this mailbox store is operational. See the provisioning task report for a list of the affected mailboxes.\n\nTask: {0}\n\nDomain: {1}\n\nMailbox store: {2}\n\nError: {3}A provisioning group target contained no mailboxes. Update or delete this target.\n\nTask: {0}\n\nDomain: {1}\n\nProvisioning group: {2}\n\nTarget: {3}Duplicate archive point: '{0}'.\nThe original folder and its archive point have been copied.\nThis folder and its subfolders will not archived until this situation is resolved.\nRefer to the documentation for more information.The Exchange mailbox provisioning task could not connect to a domain controller for a domain in the forest. The task cannot process any Active Directory objects from this domain.\n\nTask: {0}\n\nDomain: {1}\n\nFailed domain: {2}\n\nError code: {3}The Exchange mailbox provisioning task found some mailboxes that are not eligible for processing by this task.\n\nThis task will process mailboxes on every Exchange Server in this domain that has been added to the Administration Console.\n\nIf you want this task to process such mailboxes, add the host Exchange Server to the Administration Console.\n\nTo include the names of these mailboxes in the provisioning task report, set the 'DisableExternalMbxLogging' registry value to 0.\n\nTask: {0}\n\nDomain: {1}Restoring of file {0} failed for destination {1}. Additional info: {2}Error getting system folder using WMI on server name: {0}\nReason: {1}{0}The Exchange provisioning task found a mailbox with duplicate entries in the Enterprise Vault database, and automatically removed the duplicates. The default Vault ID of the most recent entry has been selected for this mailbox.\n\nThe mailbox is not currently enabled for client-side PST migration. You may wish to review this setting to confirm that it is correct.\n\nTask: {1}\n\nDomain: {2}\n\nMailbox: {3}\n\nEntryID: {4}\n\nDefault Vault ID: {5}\n\nDuplicate entries removed: {6}\n\nAssociated default Vault IDs: {7}{0}The Exchange provisioning task found a mailbox with duplicate entries in the Enterprise Vault database, and automatically removed the duplicates. The default Vault ID of the most recent entry has been selected for this mailbox.\n\nSome PST files were associated with one or more of the deleted entries. You may need to amend the database to associate the PST files with the new entry for this mailbox - contact support if required.\n\nThe mailbox is not currently enabled for client-side PST migration. You may wish to review this setting to confirm whether it is correct.\n\nTask: {1}\n\nDomain: {2}\n\nMailbox: {3}\n\nEntryID: {4}\n\nDefault Vault ID: {5}\n\nDuplicate entries removed: {6}\n\nAssociated default Vault IDs: {7}Unable to move database: '{0}' to '{1}'\n\nAdditional info:\n{2}\n\nSession details:\n{3}Unable to open database: '{0}'\n\nAdditional info:\n{1}\n\nSession details:\n{2}If delete on delete flag of policy applied to volume is set, archived files will be deleted when placeholder is deleted. This may result in data loss.Could not set the apparent size of NetApp placeholders. (Error creating COM object.) \n\nNetApp placeholders will appear to have a size of 0 KB.NetApp placeholders will appear to have a size of 0 KB.Could not contact the Enterprise Vault Domino Gateway server '{0}' ('{1}') in domain '{2}'.\n\nThis server has been marked as unavailable and will not be used until it becomes available. Check that the server is operating correctly and can be reached over the network, then run the provisioning task.There are no available Enterprise Vault Domino Gateway servers in domain '{0}'.\n\nUsers will not be able to view shortcuts or search archives until this problem is resolved. Check that the Enterprise Vault Domino Gateway servers for this domain are operating correctly and can be reached over the network, then run the provisioning task.File server is not reachable. Archiving will not succeed until the problem is resolved.\n\nFile server: '{0}'Error updating the file blocking agent on server: {0}.\nLast successful update: {1}\nReason: {2}.Domino server '{0}' has moved from cluster '{1}' to '{2}'.\n\nReview the Enterprise Vault cluster settings and update if required.Domino server '{0}' has moved from cluster '{1}' to '{2}'.\n\nThis server was the Enterprise Vault preferred server in its previous cluster, but has not been set as the preferred server in the new cluster. Review the Enterprise Vault cluster settings and update if required.Domino server '{0}' was removed from cluster '{1}'.\n\nReview the Enterprise Vault cluster settings and update if required.Domino server '{0}' was removed from cluster '{1}'.\n\nThis server was the Enterprise Vault preferred server in the cluster - there is now no preferred server. Review the Enterprise Vault cluster settings and update if required.There was an error processing a mailbox. The task will process the mailbox again on the next archiving run.\n\nTask: {0}\n\nMailbox: {1}\n\nError: {2}\n\nTrace: {3}<p>There was an error processing an item in a mailbox. The task will process the item again on the next archiving run. Task: {0} Mailbox: {1} NoteID: {2} Subject: {3} Error: {4} Trace: {5} </p> <p>e.g.</p> <p>There was an error processing an item in a mailbox. The task will process the <br />item again on the next archiving run.</p> <p>Task: Domino Mailbox Archiving Task</p> <p>Mailbox: 'SERVER/ACME1!!mail\dowd'-CN=Elwood <a href="mailto:Dowd/O=ACME1@MYDOMAIN">Dowd/O=ACME1@MYDOMAIN</a></p> <p>NoteID: 110e</p> <p>Subject: &lt;unavailable&gt;</p> <p>Error: Error(3637): Unable to open note 110e - Cannot convert MIME message to <br />Notes Rich Text message.</p> <p>Trace:&nbsp;&nbsp;&nbsp; at DomNote.Open()<br />&nbsp;&nbsp; at LotusDominoMailboxArchivingTask.BaseQItem.OpenNote()<br />&nbsp;&nbsp; at LotusDominoMailboxArchivingTask.ArchiveQItem.Process()</p> <p></p>There was an error processing an item in a mailbox. The task has previously failed to process this item on several occasions. This item will not be processed again.\n\nTask: {0}\n\nMailbox: {1}\n\nNoteID: {2}\n\nSubject: {3}\n\nError: {4}\n\nTrace: {5}The task is unable to continue processing. The task will now stop.\n\nTask: {0}\n\nError: {1}\n\nTrace: {2}The Enterprise Vault internal SMTP domains have not been configured.\nMessage direction cannot be evaluated until the internal SMTP domains have been defined.\nRefer to the documentation for more information.No Domino servers have been added as archiving targets. Add a server to the domain and run the provisioning task again.\n\nTask: {0}\n\nDomain: {1}Validation for placeholder {0} failed. \n\nReason: {1}Unable to contact Domino archiving target server. Ensure that this server is operating correctly.\n\nTask: {0}\n\nDomain: {1}\n\nServer name: {2}\n\nError: {3}The archive for an enabled mailbox could not be found. The archive may have been deleted.\n\nThis mailbox has been disabled. Enable the mailbox again to resume archiving.\n\nTask: {0}\n\nUser name: {1}\n\nMailbox name: {2}Cannot determine synchronization schedule or shortcut deletion schedule for task: {0}. Shortcut deletion will not run.Task: '{0}'\n\n{1}

There was an error processing a mailbox. The task will process the mailbox again on the next archiving run.\n\nCheck that the Domino administrator account for the server '{0}' has a cross-certificate for the organization '{1}'.\n\nTask: {2}\n\nMailbox: {3}\n\nError: {4}The following item has failed during external filtering on {3} occassions and will not be processed again:\n\nSubject: {0}\nNoteId: {1}\nDatabase: {2}Task: '{0}'\n\nUnable to connect to Domino server '{1}' while processing mailbox '{2}'. The task will process the mailbox again on the next archiving run.The task was unable to process the items with the following note IDs due to unexpected data in the view summary. Contact support.\n\nTask: {0}\n\nView: {1}\n\nNote IDs: {2}Enterprise Vault could not authenticate a Domino user (group resolution failed). The user cannot access personal archives (access denied).\n\nUser name: {0}\n\nDomain: {1}\n\nError: {2}Enterprise Vault encountered an SQL Error while retrieving a set of mail files. If the retry is not successful then the remaining mail files in this Domain will not be processed in this archiving run.\n\nDomain: {0}\n\nRetry: {1}\n\nLowest MailboxId: {2}Enterprise Vault was unable to archive the following notes because they could not be opened. Contact support.\n\nTask: {0}\n\nMailbox: {1}\n\nNotes:\n{2}\nKey to error codes:\n{3}Enterprise Vault found encrypted notes in the Domino journal that do not appear to be encrypted by a user and that could not be decrypted by the journaling ID.\n\nCheck that you are using the correct journaling ID for this journal database. If you would like to archive these notes in their encrypted form, set the DominoJournalArchiveNonDecryptableNotes registry value to 1. See the documentation for further details.\n\nTask: {0}\n\nJournal database: {1}\n\nJournaling ID: {2}\n\nNote IDs: {3}Exiting FSAUtility move placeholder operation. Exception - {0}Failed to enable archiving on fileserver {0}, Excpetion - {1}There was an error archiving an item in an NSF file. The item will be moved to the associated mail file, if available.\n\nNSF file: {0}\n\nNoteID: {1}\n\nSubject: {2}\n\nError: {3}\n\nTrace: {4}Aborting FSAUtility move placeholder operation.\n{0}Failed to enable archiving on fileserver {0}, Exception - {1}There was an error archiving an item in an NSF file. The item will be moved to the associated mail file, if available.\n\nNSF file: {0}\n\nNoteID: {1}\n\nSubject: {2}\n\nError: {3}\n\nTrace: {4}No Cache location has been specified. A valid Cache location is required.The specified 'Maximum Cache Size' is below the recommended value of 10GB.\nYou can edit the server's properties in the Administration Console to increase the size of the Cache.The Active Directory objects that hold information for Exchange Managed Folders are unavailable. This may be a problem with account permissions. See 'Installing and Configuring' for information on the Vault Service account permissions.\n\nObject: {0}The Content Cache Request Manager failed to process a client request because of one or more of the following: \n * Cache Location (Set in Server Properties)\n * 'Maximum Cache Size' (Set in Server Properties)\n * 'Maximum Concurrent Vault Cache Updates' is set to 0 (Set in Server Properties)\n * The Directory Service is unavailable\n * The Storage Service is unavailable\n\n The Content Cache Request Manager will work in 'offline' mode until the problem is fixed.The Content Cache Request Manager was unable to perform one or more tasks because the Directory Service or Storage Service was unavailable.An enabled mailbox could not be found on the mail server. The mailbox may have been deleted.\n\nEnterprise Vault has disabled this mailbox. You can re-enable the mailbox if the mailbox was only temporarily removed from the server.\n\nTask: {0}\n\nUser name: {1}\n\nMailbox name: {2}FSAReporting Web Service Configuration Utility reported error: {0}FSAReporting Web Service Configuration Utility completed successfully. Exit code {0}. Additional info: {1}FSAReporting Web Service Configuration Utility completed unsuccessfully. Exit code {0}. Additional info: {1}FSAReporting Web Service Configuration Utility started with command '{0}'The FSA Reporting Web service is not running at '{0}'.\nTo troubleshoot the Web service configuration, see the Enterprise Vault Technical Note 'Troubleshooting FSA Reporting'.The following Domino mailbox has not been synchronized in the last {0} days. The user associated with the mailbox is not in the Domino directory. Enterprise Vault has disabled this mailbox.\n\nMailbox: {1}\n\nUser: {2}\n\nLast synchronized: {3}The checkpoint folder could not be accessed. The task cannot continue.\n\tCheckpoint folder: {0}The checkpoint file could not be saved. Check the permissions of the folder and the file.\n\tCheckpoint file:{0}The checkpoint file cannot be accessed. The task will create a new checkpoint and continue processing.\n\tCheckpoint file:{0}The checkpoint file is corrupt. The task will create a new checkpoint and continue processing.\n\tCheckpoint file:{0}The SQL database for Vault Store Group '{0}' has not been backed up for {1} days. The information in this database is at risk until the database has been backed up.\n\nReview your SQL database backup procedures and make any changes needed to ensure that backups happen in a timely fashion.The SQL database transaction log for Vault Store Group '{0}' has not been backed up for {1} days. The information in this database is at risk until the database has been backed up.\n\nReview your SQL database backup procedures and make any changes needed to ensure that backups happen in a timely fashion.The SQL database transaction log for Vault Store Group '{0}' has used {1}% of its allocated space.\n\nThe information in this database is at risk until the database has been backed up.\n\nReview your SQL database backup procedures and make any changes needed to ensure that backups happen in a timely fashion.\n\nEnsure that your database is adequately sized for the transactions taking place during an archive run.\n\nAlso check that there is enough disk space available to accommodate any growth in your database and database transaction log files.There was an error processing an item in a database. The task will process the item again on the next archiving run.\n\nTask: {0}\n\nDatabase: {1}\n\nNoteID: {2}\n\nSubject: {3}\n\nError: {4}\n\nTrace: {5}There was an error processing an item in a database. The task has previously failed to process this item on several occasions. This item will not be processed again.\n\nTask: {0}\n\nDatabase: {1}\n\nNoteID: {2}\n\nSubject: {3}\n\nError: {4}\n\nTrace: {5}Source archive {0} is unavailable. The current state of source archive is {1}. Enterprise Vault will try again later unless the retry count has been reached.Cannot change the source archive state to 'closed'. Enterprise Vault will try again later unless the retry count has been reached.\n\nSource archive: {0}\n\nException: {1}Cannot read the state of the source archive. Enterprise Vault will try again later unless the retry count has been reached.\n\nSource archive: {0}\n\nException: {1}Cannot set the source archive state back to its original state: {0}. You must reset the source archive state manually.\n\nSource archive: {1}\n\nException: {2}Could not create the destination archive. Enterprise Vault will try again later unless the retry count has been reached.\n\nException: {0}Journal archives cannot be moved to other sites.Started moving archive.\n\nSource archive: {0}\n\nDestination archive: {1}Started moving archive.\n\nSource archive: {0}\n\nDestination Vault Store: {1}Archive has been moved successfully.\n\nSource archive: {0}\n\nDestination archive: {1}Archive has been moved successfully.\n\nSource archive: {0}\n\nDestination Vault Store: {1}Archive has been moved. There were errors. See the report file for details.\n\nSource archive: {0}\n\nDestination archive: {1}Archive has been moved. There were errors. See the report file for details.\n\nSource archive: {0}\n\nDestination Vault Store: {1}Could not read checkpoint data for archive. Enterprise Vault will move all the items again.\n\nArchive: {0}\n\nException: {1}

Could not mark the destination archive for shortcut processing. Enterprise Vault will try again later unless the retry count has been reached.\n\nException: {0}You cannot move this type of archive.\n\nArchive name :{0}\n\n Archive type: {1}The Vault Service account has been granted read permissions to the source archive. The task could not reset the permissions to their original values. You must reset the permissions manually.\n\nSource archive: {0}\n\nException: {1}.Processing failed. Enterprise Vault will try again later unless the retry count has been reached.\n\nException: {0}.Could not read the source archive. Enterprise Vault will try again later unless the retry count has been reached.\n\nSource archive: {0}\n\nException: {1}.An error was encountered while processing an item. Enterprise Vault will try again later unless the retry count has been reached.\n\nItem: {0}\n\nArchive: {1}\n\nException: {2}.Could not determine the shortcut update task for the destination archive. Enterprise Vault will try again later unless the retry count has been reached.\n\nSource archive: {0}\n\nDestination archive: {1}\n\nException: {2}.Could not update the shortcuts for the destination archive. Enterprise Vault will try again later unless the retry count has been reached.\n\nSource archive: {0}\n\nDestination archive: {1}\n\nException: {2}.Could not grant the Vault Service account read access to the source archive. If the Vault Service account does not already have read access to the archive the move will fail.\n\nSource archive: {0}\n\nException: {1}.Archive move has been stopped.\n\nSource archive: {0}\n\nDestination Vault Store: {1}Archive move has been stopped.\n\nSource archive: {0}\n\nDestination archive: {1}Could not update Microsoft Exchange mailbox folders with the new archive folder entry IDs. Enterprise Vault will try again later unless the retry count has been reached.\n\nSource archive: {0}\n\nDestination archive: {1}\n\nException: {2}.Error: the system default codepage must be set to English. It is currently set to {0}.\n\nTo fix this problem, use Regional and Language Options in the Windows Control Panel to set the language for non-Unicode programs to English (United States).\n\nContact support for further information.Could not move the source archive because both the source and destination archive are associated with an enabled user. Disable the user associated with the source archive.\n\nSource archive: {0}\n\nDestination archive: {1}.Could not move the source archive because the destination archive is not associated with an enabled user. Try moving to a new archive or to an archive associated with an enabled user.\n\nSource archive: {0}\n\nDestination archive: {1}.The destination Vault Store is in backup mode. Enterprise Vault will wait until the backup mode of the destination folder is cleared.\n\nSource archive: {0}\n\nDestination Vault Store: {1}.The destination Vault Store is no longer in backup mode. The archive move will start.\n\nSource archive: {0}\n\nDestination Vault Store: {1}.The Domino retention plans configuration has been updated.\n\nThe new configuration is:\n\n{0}The Domino retention plans configuration has been cleared.\n\nNo retention plans are currently applied.Enterprise Vault cannot update an archived note. Enterprise Vault will not attempt to process the note again. You can delete the note after the saveset has been backed up.\n\nTask: {0}\n\nDatabase: {1}\n\nNoteID: {2}\n\nReason: {3}Could not create or update the archive history record for the source archive. Enterprise Vault will try again later unless the retry count has been reached.\n\nSource archive: {0}\n\nDestination archive: {1}\n\nException: {2}.Archive move has been stopped.\n\nSource archive: {0}\n\nDestination Vault Store: {1}\n\nReason: {2}.\n\nEnterprise Vault will try again later.Archive move has been stopped.\n\nSource archive: {0}\n\nDestination archive: {1}\n\nReason: {2}.\n\nEnterprise Vault will try again later.Could not determine whether the backup of the items in the destination archive is complete. Enterprise Vault will try again later unless the retry count has been reached.\n\nSource archive: {0}\n\nDestination archive: {1}\n\nException: {2}Failed to determine whether the source archive contains items that are on legal hold. Enterprise Vault will try again later unless the retry count has been reached.\n\nSource archive: {0}\n\nDestination archive: {1}\n\nException: {2}Could not grant the Vault Service account access to the destination archive. If the Vault Service account does not already have access to the archive the move will fail.\n\nDestination archive: {0}\n\nException: {1}.The Vault Service account has been granted full permissions to the destination archive. The task could not reset the permissions to their original values. You must reset the permissions manually.\n\nDestination archive: {0}\n\nException: {1}.Move archive has detected an error occurred when the items in the destination archive were being verified following a backup.\nThe maximum retry threshold has been reached and Archive moves will no longer attempt to re-copy any further items.\n\nPlease check the event log on the Enterprise Vault server where the destination archive is located.\nPlease check the Move archive log file on the Enterprise Vault server where the source archive is located.\n\nThe move archive documentation contains more information about setting the threshold for the maximum number of retries.\n\nSource archive: {0}\n\nDestination archive: {1}\n\nDestination Vault Store: {2}Move archive detected a storage error while the items in the destination archive were being verified following a backup. Check the event log on the Enterprise Vault server that hosts the destination archive.\n\nUnless the maximum number of retries has been exceeded, move archive will re-copy the items, wait for the items to be backed up, then repeat the verification.\n\nSource archive: {0}\n\nDestination archive: {1}.\n\nDestination Vault Store: {2}FSA Reporting cannot work on file server {0}. The version of the FSA Agent that is on the file server is older than the version of Enterprise Vault that is on the Enterprise Vault server.\nUpgrade the FSA Agent to a compatible version.Move archive cannot move this item because it already exists in another archive in the destination vault store.\n\nItem: {0}\n\nSource archive: {1}\n\nDestination vault store: {2}\n\nSelected destination archive: {3}\n\nArchive that contains the duplicate: {4}\n\nEnterprise Vault will try again later unless the retry count has been reached.\n\nFor more information about the handling of duplicate items, see the Administrator's Guide.An exception occurred while writing the log file for MovePlaceholder. No more entries will be logged.Failed to send and update metadata to server. Exception: {0}Failed to send and update data to server. Exception: {0}%1 For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp %1 For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp %1 For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp %1 For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp %1 For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp %1 For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp %1 For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp %1 For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp %1 For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp %1 For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp %1 For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp %1 For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp %1 For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp %1 For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp

%1 For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp %1 For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp %1 For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp %1 For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp %1 For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp %1 For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp %1 For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp %1 For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp %1 For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp %1 For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp %1 For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp %1 For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp %1 For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp %1 For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp %1 For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp %1 For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp %1 For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp %1 For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp %1 For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp %1 For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp %1 For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp %1 For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp %1 For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp %1 For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp %1 For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp %1 For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp %1 For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp %1 For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp %1 For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp %1 For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp %1 For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp %1 For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp %1 For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp %1 For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp %1 For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp %1 For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp %1 For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp %1 For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp %1 For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp %1 For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp %1 For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp %1 For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp %1 For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp %1 For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp %1 %1 For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp %1 For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp %1 For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp %1 For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp

%1 For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp %1 For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp %1 For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp %1 For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp %1 For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp %1 %1 For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp %1 For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp %1 For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp %1 For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp %1 For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp %1 For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp %1 For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp %1 For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp %1 For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp %1 %1 For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp %1 For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp %1 For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp %1 For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp %1 For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp %1 For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp %1 For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp %1 For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp %1 For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp %1 %1 For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp %1 For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp %1 For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp %1 For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp %1 For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp %1 For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp %1 For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp %1 For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp %1 For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp %1 %1 For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp %1 For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp %1 For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp %1 For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp %1 For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp %1 For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp %1 For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp %1 For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp %1 For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp %1 %1 For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp %1 For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp %1 For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp %1 For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp %1 For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp %1 For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp %1 For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp

%1 For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp %1 For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp %1 %1 For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp %1 For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp %1 For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp %1 For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp %1 For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp %1 For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp %1 For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp %1 For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp %1 For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp %1 %1 For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp %1 For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp %1 For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp %1 For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp %1 For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp %1 For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp %1 For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp %1 For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp %1 For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp %1 %1 For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp %1 For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp %1 For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp %1 For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp %1 For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp %1 For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp %1 For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp %1 For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp %1 For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp %1 %1 For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp %1 For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp %1 For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp %1 For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp %1 For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp %1 For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp %1 For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp %1 For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp %1 For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp %1 %1 For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp %1 For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp %1 For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp %1 For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp %1 For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp %1 For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp %1 For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp %1 For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp %1 For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp %1 %1 For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp

%1 For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp %1 For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp %1 For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp %1 For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp %1 For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp %1 For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp %1 For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp %1 For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp %1 %1 For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp %1 For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp %1 For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp %1 For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp %1 For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp %1 For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp %1 For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp %1 For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp %1 For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp %1 %1 For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp %1 For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp %1 For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp %1 For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp %1 For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp %1 For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp %1 For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp %1 For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp %1 For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp %1 For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp %1 For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp %1 For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp %1 For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp %1 For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp %1 For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp %1 For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp %1 For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp %1 For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp %1 For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp %1 For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp %1 For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp %1 For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp %1 For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp %1 For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp %1 For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp %1 For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp %1 For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp %1 For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp %1 For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp %1 For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp The Enterprise Vault NetApp File Placeholder service is starting For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp

The Enterprise Vault NetApp File Placeholder service has started For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp The Enterprise Vault NetApp File Placeholder service has stopped For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp An exception has occurred. [Internal reference %1] For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp Invalid argument passed to method Argument: %1 For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp The NetApp Placeholder Service is configured to run under the Local System account. It should be configured to run under the Vault Service Account. For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp You cannot start a running server For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp Failed to start the main server thread due to the following error: %1 For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp Failed to initialize the NetApp placeholder server For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp Failed to start the server worker threads for the NetApp placeholder server named: %1 For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp An exception has occurred. [Internal reference %1] For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp There are no more items to process For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp At least one of the Item Processor threads has failed For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp All of the item Processor threads have stopped For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp A worker thread in the NetApp placeholder server server has failed. The NetApp placeholder server will attempt to restart the server For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp Failed to contact the Filer named: %1 For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp Failed to register with the Filer named: %1, Error: %2 For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp An unrecoverable error has occurred, the service will be shut down For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp The slave process for the NetApp placeholder server named: %1 has failed and will be restarted For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp The slave process for the NetApp placeholder named: %1 has failed and will NOT be restarted as it has exceeded %2 restarts in %3 minutes For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp The slave process for the NetApp placeholder named: %1 is not responding and will be restarted For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp The slave process for the NetApp placeholder named: %1 is not responding and will NOT be restarted as it has exceeded %2 restarts in %3 minutes For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp The slave process for the NetApp placeholder named: %1 has requested a restart and will be restarted For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp The slave process for the NetApp placeholder server named: %1 has requested a restart but will NOT be restarted as it has exceeded %2 restarts in %3 minutes For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp The NetApp placeholder server for Filer: %1 failed to configure FPolicy, error: %2, the placeholder server will shutdown For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp The NetApp placeholder server for Filer: %1 failed to start as the filer does not support Manage ONTAP V7.0 or greater For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp File successfully recalled but the last-modified date does not match the original date. The file may be archived again as a new version. File: %1 For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp The custom filter could not get the rule set name. Error: %1 Internal References: %2 %3 For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp An error has occurred in the custom rules mechanism. Error: %1 Internal References: %2 %3 For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp The custom filter could not add any rule sets. Please check the XML files are available in '%4'. Error: %1 Internal References: %2 %3 For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp An error has occurred when adding a custom rule set. This error may be caused by incorrect XML syntax. Error: %1 Internal References: %2 %3 For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp Could not start the custom filter. Error: %2 Internal References: %1 %3 For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp The custom filter could not process a message. Error: %1 Internal References: %2 %3 For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp An error has occurred when adding custom rule set '%1'. Requested retention category '%2' does not exist. Please check that the custom rule set references existing retention categories only. For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp An error has occurred when adding custom rule set '%1'. Requested archive '%2' does not exist. Please check that the archive specified has been created in Enterprise Vault. For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp An error has occurred when adding custom rule set '%1'. Requested archive '%2' is in an invalid state (%3). For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp An error has occurred when adding custom rule set '%1'. Requested archive '%2' could not be found Internal References %3 For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp An unrecoverable error has occurred in one of the custom rules. For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp An unrecoverable error has occurred in one of the custom filters. For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp The custom properties definition file could not be found - custom property indexing and categorisation functionality has been disabled. For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp There was a problem adding property '%1' to custom property set '%2'. Details: %3 %4 For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp There was an unrecoverable error processing custom properties. Details: %1 For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp You do not have a Custom XML Filter license. If you want to use the Custom XML Filter please contact your license supplier. For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp Your Custom XML Filter license has expired. If you want to use the Custom XML Filter please contact your license supplier. For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp External Filter '%1' initialising... For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp External Filter '%1' stopped. For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp An error has occurred when adding custom rule set '%1'. The action '%2' requested by rule '%3' is not supported by '%4' tasks. For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp An error has occurred when adding a custom rule set. The distribution list '%1' requested is ambiguous in the Exchange server. Could not resolve name to a single distribution list. Check for distribution lists with the same display name. For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp An error has occurred when adding a custom rule set. The distribution list '%1' requested could not be found. (Is the spelling correct?) For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp

IArchivingControl2::MAPISaveChanges() is not supported when using get_CDOMessage or get_CDOMessageEnvelope. If the filter changes message properties or attachments you must use get_MAPIMessage and/or get_MAPIMessageEnvelope. For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp The CDO components are not installed on the Enterprise Vault server. A filter has requested access to a message using CDO. This type of access is supported only when Outlook 2003 is installed on the Enterprise Vault server. Resolution: Install Outlook 2003, including the Collaboration Data Objects, on the Enterprise Vault server. For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp A critical error occurred initialising the deduplication cache. Error: %1 Internal References: %2 %3 For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp An error has occurred in the deduplication cache. Error: %1 Internal References: %2 %3 For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp The Directory Service name is invalid or the Directory Service is not running For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp The Directory property must be set first For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp Could not create the Enterprise Vault Directory Connection object For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp The Entry Id is not valid For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp Invalid table ID For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp An error occurred replacing the script parameters For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp One of the arguments supplied in the arguments array could not be converted to a string For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp The Site property must be set before this property For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp Invalid property value For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp The Indexing Service could not be found For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp The following properties must be set before Enable/Disable can be called: Directory, Site, ExchangeServer, SystemMailbox, (MailboxDN or LDAPQuery) For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp Failed to create a StdIn pipe For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp Failed to create the StdOut pipe For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp Failed to duplicate the std handle For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp Failed to close the temporary handle For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp The password for the Logon details was not set For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp Failed to create the policy manager process For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp Failed to create the policy manager process under the specified account For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp Could not log the user on for the policy manager process For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp Failed to wait for the process to complete For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp Could not get the exit code from the policy manager process For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp Could not get the temp file path For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp Could not get the temp file name For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp Could not create the provisioning initialization file For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp Could not write the provisioning initialization file For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp Could not close the provisioning initialization file For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp Failed to connect to the Admin Service For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp The second argument must be an array For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp The Script file could not be found For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp Script file is not unicode For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp Could not open the Enterprise Vault Registry Key For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp Could not read the Installation directory from the registry For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp The script returned errors, check the report for details For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp The script timed out For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp Failed to read the Logon Details For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp The following properties must be set before ExecuteScript can be called: Directory, ExchangeServer, SystemMailbox, (ScriptFile or ScriptText) For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp The domain name specified does not exist. For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp Error occurred while accessing the database. For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp Error occurred while communicating with Active Directory. For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp Unspecified error occurred while Exchange provisioning task processing. For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp The provisioning task failed to process the target. For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp Failed to access the Directory service. For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp Failed to read record from Directory database. For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp Folder skipped from being processed. For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp

Fileserver synchronization failure. For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp The user cannot by synchronized until they have been provisioned. For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp Journal mailboxes cannot be synchronized using the IExchangeServerSync::SyncMailbox call. For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp A provisioning run to synchronize policies is required. For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp The Exchange Server has not been configured in the current Vault site or an Archiving task has not been configured. For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp The folder path provided does not exist in the mailbox. For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp The folder is being managed by Exchange and is not supported through this interface. For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp The mailbox is not enabled. For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp The user policy does not allow processing of the Deleted Items folder. For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp ProvisioningAPI components must be created out of process. For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp

The user %1 attempted to restore a message into an Exchange mailbox and they were not the mailbox owner or an Administrator <br>e.g.<br> The user ACMEDOM\DOWDEP attempted to restore a message into an Exchange mailbox and they were not the mailbox owner or an Administrator

Archiving has been enabled for mailbox %1 <br>e.g.<br> Archiving has been enabled for mailbox /o=Acme/ou=ZKO Administrative Group/cn=Recipients/cn=dowd.ep Archiving has been disabled for mailbox %1 <br>e.g.<br> Archiving has been disabled for mailbox /O=ACME/OU=ZKO/CN=RECIPIENTS/CN=DOWDP

<p>Failed post the process system message for the ExchangeSystem %1 </p> <p>e.g. Failed post the process system message for the ExchangeSystem EXUSNY1</p>

IRestorationAgent->SavesetAvailable() function failed whilst processing the item with TransactionID: %1, SavesetID: %2 <br>e.g.<br> IRestorationAgent->SavesetAvailable() function failed whilst processing the item with TransactionID: G6TR874KF80B11D781D7004769855A8, SavesetID: 5483230000000000~20011191224270000~0~5KFR47DB45DB40069919F64EBA4D40C The user restore request TransactionID: %1, SavesetID: %2 failed whilst being processed by the storage service <br>e.g.<br> The user restore request TransactionID: C7B961F9D8D54E92888E6C12D1A787C, SavesetID: 639000000000000~200401230634000000~0~7E05C940AC664C7C97DB41695CB764F failed whilst being processed by the storage serviceThe retrieval client could not be notified due to invalid parameters passed to the function IBackgroundArchivingAgent->SavesetAvailable()

Mailbox Report Date: %1 System Name: %2 Mailbox Name: %3 Associated Account: %13 Mailbox State: %18 Mailbox Quota Limit: %14 KB Mailbox Quota Used: %15 KB Percentage of Mailbox Quota free: %16 Number of archivable items in mailbox: %4 Total size of archivable items in mailbox: %5 KB Number of archivable folders in mailbox: %6 Number of items ready to archive: %7 Total size of items ready to archive: %8 KB Number of items that would be archived: %9 Total size of items that would be archived: %10 KB Number of expired shortcuts that would be deleted: %17 Start Time: %11 End Time: %12 Mailbox Report Date: %1 System Name: %2 Mailbox Name: %3 Associated Account: %4 Archiving is disabled for this mailbox Mailbox Report Date: %1 System Name: %2 Mailbox Name: %3 Associated Account: %4 Archiving is suspended for this mailbox

Could not scan user mailbox %2, unable to get the entry id of the Deleted Items folder Reason: %1 <br>e.g.<br> Could not scan user mailbox /o=acme/ou=US-ACME/cn=Loadsim Users/cn=EXUSNY2/cn=Nee1t0g3aa, unable to get the entry id of the Deleted Items folder<Br> Reason: <0x8004011b> <br>

Could not scan user mailbox %2, unable to list folders Error: %1 Reference: %3 <br>e.g.<br> Could not scan user mailbox /O=ACME/OU=NY/CN=RECIPIENTS/CN=DOWDEP, unable to list folders <br> Error: <0x8004011b> <br> Reference: PF_GetFolderTable[2]<br>

Could not scan user mailbox %1, cannot list messages <br>e.g.<br> Could not scan user mailbox The parameter is incorrect. [0x80070057], cannot list messages<br> Could not scan user mailbox %1, cannot list messages <br>e.g.<br> Could not scan user mailbox<br> /o=ACME/ou=ZKOEUROPEENGINEERING/cn=ZKO REO/cn=DowdP, cannot list messages <p>An error occurred whilst processing the message titled: %1 for mailbox: %2, the message will not be archived and could not be changed back from the Archive Pending state. </p> <p></p>An error occurred whilst post processing a message and it could not be changed back from the Archive Pending state. Error that caused the message to be changed back: %1 Error when trying to change the message back: %2 <br>e.g.<br> An error occurred whilst post processing a message and it could not be changed back from the Archive Pending state. Error that caused the message to be changed back: 8004011d Error when trying to change the message back: c0040899

An error occurred whilst processing the journal mailbox %1, this mailbox is disabled or suspended from archiving, the journaling service will shut down. An error occurred whilst queuing the message titled: %1 for mailbox: %2 for archival, the message will not be archived and could not be changed back from the Archive Pending state.

The Archiving service for <Exchange Server> could not be started due to startup errors. <P>For example:</P> The Archiving service for STEWART could not be started due to startup errors.

The Journaling service for %1 could not be started due to startup errors. <br> For example: The Journaling service for ACMEEXCH1 could not be started due to startup errors.

Could not get a MAPI session from the session pool whilst processing mailbox %1 The following error was returned: %2. <br>e.g.<br> Could not get a MAPI session from the session pool whilst processing mailbox /o=ACME/ou=ZKO Group/cn=Recipients/cn=dowdep The following error was returned: 80004005.

Error processing archiving request for system %1, could not list mailboxes for the Exchange system <BR>e.g.<BR> Error processing archiving request for system /O=ACME /OU=ZKO/cn=Configuration/cn=Servers/cn=ACMEEX1, could not list mailboxes for the Exchange system

This is an example. Details may be quite different.<p> A queued operation exceeded the retry count and has been discarded<p> Enterprise Vault Journaling Service for ACMEEXCH1<p> m_pIBackgroundArchivingAgent->ProcessItem(Priority = "true",<br> ExchangeSystem = "ACMEEXCH1",<br> m_pILocation,<br> (ULONG)EntryIdSize = 70,<br> EntryId,<br> ArchiveId = "1828E94DA5D483744B6E82329221A153A1110000huyton.zko.acme.com",<br> RetentionCategory= "181667B5FEBDAD3119CAB00508B070AE51b10000huyton.zko.acme.com",<br> UserMailboxDn = "/o=ACME/ou=EENGINEERING/cn=Servers/cn=stewart-journal",<br> MessageTitle = "Tax Return",<br> nRetryCount = 3,<br> NULL,<br> CallerSID,<br> isAReArchive = 0, ArchiveTransId = "5E24F8CD11B14E60A60A8443859FF7F", IndexedPropertiesSet = "");<p> HRESULT: 0x80070057 %2

The Dispatcher service has been configured with an invalid name, "%1". The name should be of the form "EV_[type]_[guid]" where 'type' is either A, R and J 'guid' is 48 characters max; for example, EV_A_1234ABCD

Could not get a MAPI session from the session pool whilst building a saveset for the message titled %1 in Mailbox %2 The following error was returned: %3.

Could not get a MAPI session from the session pool whilst post processing an archived item The following error was returned: %1. <br>e.g.<br> Could not get a MAPI session from the session pool whilst post processing an archived item <p> The following error was returned: c00408da.

Error whilst enabling mailbox for user o=Acme/ou=ZKO Administrative Group/cn=Recipients/cn=dowdp, error sending enabled message. <p> Possible Reason: The message file could not be found. <p> Please refer to 'Editing the Welcome Message' in the Administration Help for more information on editing and copying the enabled message file. e.g. Error whilst disabling mailbox for user {mailbox DN}, error sending disabled message <p> Possible Reason:<br> The message file could not be found. <br> Please refer to 'Editing the Welcome Message' in the Administration Help for more information on copying the disabled message file.

Failed to locate the mailbox filter for the mailbox for %1, mailbox will not be processed <br>e.g.<br> Failed to locate the mailbox filter for the mailbox for /o=acme/ou=UK-REO/cn=Recipients/cn=DOWDP, mailbox will not be processedFailed to lookup the NT Account name for the user SID, error creating vault for mailbox /o=exchange/ou=First Administrative Group/cn=Recipients/cn=User.One Failed to lookup Message Queue name for the %1 Agent in the Directory Service on computer %2 Possible Reasons: 1. Failed to connect to the Directory Service 2. Failed to find Service Entry : %3

An error occurred whilst reading the message store quotas for the mailbox /o=ACME/ou=NY/cn=REO/cn=Dowdep<br> MAPI Error: 0x8007203A

Could not get a MAPI session from the session pool whilst processing OperationFailed for an archived item The following error was returned: %1.

%1:initializeAgentServiceEntry() Reading the site domain, account and password. Then setting RUNAS property in the registry for the AgentClientBroker.exe out of proc server.

%1:initializeAgentServiceEntry() Set the AgentClientBroker.exe launch permissions. Add "Vault Site Account Launch". Add "Everyone Deny Launch"

%1:AgentMessageDispenser::ProcessNextMessage() Exceeded the maximum retry count for this message (%2). Will write to the event log. %1:AgentMessageDispenser::ProcessNextMessage() Read new message or a message that is within its retry limit (%2). About to process the message body

%1:AgentMessageDispenser::ProcessNextMessage() Activate object returned with status AGENTS_E_DISPRETRY. The retry count will be incremented, and the message reposted to the end of the queue %1:AgentMessageDispenser::ProcessNextMessage() Activate object returned with status AGENTS_E_DISPSLEEP. A worker thread has asked the service to sleep for a time period. Setting the current time in agent entry and then telling worker threads to sleep. The message will be reposted to the end of the queue %1:AgentMessageDispenser::ProcessNextMessage() Activate object returned with status AGENTS_E_DISPABORTITEM. The dispenser has aborted the processing of the item. This failure will be processed by dropping through to the AGENTS_E_DISPABORT case section %1:AgentMessageDispenser::ProcessNextMessage() Activate object returned with status AGENTS_E_DISPABORT. The dispenser has been told to stop. The current message will be reposted to the end of the queue and the current transaction will be committed. Its retry count will NOT be incremented %1:AgentMessageDispenser::ProcessNextMessage() The message queue error was MQ_ERROR_REMOTE_MACHINE_NOT_AVAILABLE. This failure will be processed by dropping through to the "default" case section %1:AgentMessageDispenser::ProcessNextMessage() A message queue error was received which we don't explicitly want to handle. We will act as if we have been asked to sleep for a while

%1:AgentMessageDispenser::ActivateObject() MAPI error = %2. This is a recoverable error so we will sleep and have another go later. We will not update the retry count

%1:AgentMessageDispenser::ActivateObject() Error message = RETRIEVAL_UPDATERESTORATIONCLIENT. The restoration agent has failed to notify a Restoration client, so abort the current message and report to the back of the message queue. We will not up the retry count %1:AgentMessageDispenser::ActivateObject() Error message = AGENTS_I_AMD_AO_ARCHIVING_E_COPYTOFAILED. This will fall through to be handled by the default case %1:AgentMessageDispenser::ActivateObject() An error that we do not specifically recognize has occurred, so we'll just increment this messages retry count

%1:CArchivingAgent::ProcessUser() Attempt to open the users message store resulted in failure with error message = MAPI_E_NOT_FOUND Message will drop through to be handled by the next case %1:CArchivingAgent::ProcessUser() Attempt to open the users message store resulted in failure with error message = MAPI_E_FAILONEPROVIDER This is because the mailbox does not exist. This often happens when processing utility accounts like site connectors, or when mailboxes have been deleted after a process mailbox message has been queued %1:CArchivingAgent::ProcessUser() Attempt to open the users message store resulted in failure with error message = MAPI_E_NETWORK_ERROR Message will drop through to be handled by the "default" case %1:CArchivingAgent::ProcessUser() Attempt to open the users message store resulted in failure with an error message that we do not specifically recognize. Leaving routine

%1:CArchivingAgent::ProcessUser() Ignoring mailbox as we are performing percentage archiving and the user has no quota limits applied. %1:CArchivingAgent::ProcessUser() Ignoring mailbox as we are performing percentage archiving but it is already within specified quota limits

%1:CArchivingAgent::ProcessUser() Making all selected messages Archive Pending, and queuing a Process Item message to MSMQ for each message

%1:CArchivingAgent::IsEligibleForArchive(%3) The message titled: %2 will not be archived as it has not been modified since it was restored %1:CArchivingAgent::IsEligibleForArchive(%3) The message titled: %2 will not be archived as it has not been modified since it was archived

%1:CArchivingAgent::PF_SetFilterAndRetention() There is no current folder filter for the folder %2, so the parent folder filter will be used

%1:CArchivingAgent::ProcessItem() The message we wish to archive is smaller than 4MB in size, so we will build the saveset in memory

%1:CArchivingAgent::ProcessItem() We could not build a saveset for the specified item as either the archive pending message has been deleted, or the user canceled the archive operation. The message will not be archived

%1:CArchivingAgent::ProcessItem() Something has gone wrong and this has been our last retry. We will undo the archive pending message in the users mailbox, so leaving it as a normal message again

%1:CArchivingAgent::SetAccessDetails() Setting, or resetting, VaultSiteId, ExchangeServerName, ExchangePrivMbxName, AgentGuid and MessageQueueName

%1:CArchivingAgent::PostProcessArchivedItem() Either the Archive Pending message has been deleted or the Archive Operation has been canceled %1:CArchivingAgent::PostProcessArchivedItem() The archive operation was canceled, so the Archive Pending message will be removed from the queue and no further processing done. The archived messages from the storage service and the index service will be deleted. %1:CArchivingAgent::PostProcessArchivedItem() Something has gone wrong and this has been our last retry. We will undo the archive pending message in the users mailbox, so leaving it as a normal message again

%1:CArchivingAgent::ArchiveItem() Something has gone wrong. Calling OperationFailed to undo the Marked For Archive status on the message

%1:CArchivingAgentQueue::ArchiveItemNoCallBack() Sending the Message Queue message MsgID_ArchiveItem with the constructed buffer

%1:CArchivingAgentQueue::DeleteShortcut() Checking callers Vault access privileges. User must be an administrator to perform this operation

%1:CArchivingAgentQueue::DeleteShortcut() Sending the Message Queue message MsgID_ArchiveDeleteShortcut with the constructed buffer

%1:CArchivingAgentQueue::OperationFailed() Sending the Message Queue message MsgID_ArchiveOperationFailed with the constructed buffer

%1:CArchivingAgentQueue::PostProcessArchivedItem() Sending the Message Queue message MsgID_RemoveBody with the constructed buffer

%1:CArchivingAgentQueue::QueueASystemMessage() Checking callers Vault access privileges. User must be an administrator to perform this operation

%1:CArchivingAgentQueue::ProcessUser() Checking callers Vault access privileges. User must be an administrator to perform this operation

%1:CArchivingAgentQueue::RestoreItemNoCallback() Sending the Message Queue message MsgID_RestoreItem with the constructed buffer

%1:CArchivingAgentQueue::RemoveShortcut() Sending the Message Queue message MsgID_RestoreRemoveShortcut with the constructed buffer

%1:CArchivingAgentQueue::SavesetAvailable() Sending the Message Queue message MsgID_SavesetAvailable with the constructed buffer

%1:CArchivingAgentQueue::CheckCallersVaultAccess() User wasn't found in permissions cache, so lookup caller permissions from the directory service %1:CArchivingAgentQueue::CheckCallersVaultAccess() Caller permissions have been read from the directory service and has been cached for future calls %1:CArchivingAgentQueue::CheckCallersVaultAccess() User wasn't found in directory lookup, so check to see if user is an administrator %1:CArchivingAgentQueue::CheckCallersVaultAccess() User is an Administrator, and thus has permission to restore on behalf of a user. User has been cached for future calls

%1:CArchivingAgent::CheckUserVaultAccess() User wasn't found in permissions cache, so lookup caller permissions from the directory service %1:CArchivingAgent::CheckUserVaultAccess() Caller permissions have been read from the directory service and has been cached for future calls

%1:CArchivingAgentQueue::GetQueueBase() Could not get the queue base from the cache. Attempting to read it from the directory service %1:CArchivingAgentQueue::GetQueueBase() Retrieved the queue base from the directory service. Writing it to the cache for future reads

%1:CArchivingAgentQueue::SendMQMessage() Could not get the message queue handle from the cache. Attempting to open a new queue handle

%1:CRestorationAgent::RestoreItem() Failed again, and exceeded the retry count so telling the restoration client that the restore has failed

%1:CRestorationAgent::SetAccessDetails() Setting, or resetting, VaultSiteId, ExchangeServerName, ExchangePrivMbxName, AgentGuid and MessageQueueName

%1:CRestorationAgent::UpdateShoppingBasket() Calling RestorationComplete with the TransactionId = "%2", and the SavesetId = "%3"

%1:CRestorationAgent::UpdateShoppingBasket() Exiting routine as we have failed. Requeuing the message to try again later Error Returned %2

%1:CRestorationAgent::SavesetAvailable() Extract the location object as we are restoring it to the original location, because we haven't been passed an alternative

%1:CRestorationAgent::SavesetAvailable() Checking the privileges for this operation. The caller must be either the owner of the mailbox or an administrator

%1:CRestorationAgent::SavesetAvailable() The restore operation has failed and we have exceeded our retry count. Notifying client that the operation failed

Client request refused due to insufficient privileges, user %1 attempted to access the Vault: Vault Name: %2 Vault Id: %3 but did not have %4 access

The Agent failed to create the AgentClientBroker.Exe with the following error %1, the service will shut down <P>For example:<br> The Agent failed to create the AgentClientBroker.Exe with the following error 80070008, the service will shut down

The user %1 attempted to archive a message from an Exchange mailbox where they are not the mailbox owner or an Administrator <br>e.g.<br> The user ACMEDOM\DOWDE attempted to archive a message from an Exchange mailbox where they are not the mailbox owner or an Administrator

The message with a label value of %1 and message body size %2 could not be queued as it exceeds the maximum message body size. The maximum message body size is %3 The message with a label value of %1 and message body size %2 could not be queued as it exceeds the maximum message body size. The maximum message body size is %3 The message with a label value of %1 and message body size %2 could not be queued as it exceeds the maximum message body size. The maximum message body size is %3

The mailbox: %1 does NOT have write access to the following vault: Vault Name: %2 VaultId: %3 This is specified on the folder: %4. All messages within this folder will be ignored. The error %1 occurred whilst calling the method %2 <br>e.g.<br> The error c00e0056 occurred whilst calling the method CArchivingAgentQueue::ArchiveItemNoCallBack()

Error opening MSMQ Dead Letter Queue - Access is denied for queue %1 Using MSMQ Explorer, edit the permissions of the Computer on which the queue resides. Ensure that the local Administrators group has "Full Control" access. The computer properties to modify will be those of the system on which this error is logged. This can be verified by checking that the ID of the computer (displayed within the General tab of the Computer properties) corresponds with the queue name within this message

The value specified for "QueueTimeout" in the registry exceeds the maximum allowed value of %1 seconds. The timeout value in use has been reduced to this maximum The queue %1 is already open. It is likely that another process is running and will be processing the Nack messages placed on this queue. This Nack Handler will now terminate, as it is redundant. No additional action is necessary

An unexpected timeout occurred while attempting to access a queued message. This may have occurred because a message was not on a queue as expected or because the system is heavily loaded, thus causing excessive MSMQ delays. If you suspect the problem is caused by MSMQ delays, try increasing the Enterprise Vault "QueueTimeout" registry value, as described in the "Modifying Registry Settings" section in the Troubleshooting section of the Administrator help.

MSMQ negative acknowledgment message(s) have been handled. Queue:%1 Reason: Destination queue can not be reached, the queue may have been deleted MSMQ negative acknowledgment message(s) have been handled. Queue:%1 Reason: The message was purged before reaching the destination queue

MSMQ negative acknowledgment message(s) have been handled. Queue:%1 Reason: The sender does not have send access rights on the queue.

MSMQ negative acknowledgment message(s) have been handled. Queue:%1 Reason: The message signature is bad. The message could not be authenticated.

MSMQ negative acknowledgment message(s) have been handled. Queue:%1 Reason: The message could not be encrypted for the destination. MSMQ negative acknowledgment message(s) have been handled. Queue:%1 Reason: The message was sent to a non-transactional queue within a transaction.

MSMQ negative acknowledgment message(s) have been handled. Queue:%1 Reason: The message was sent to a transactional queue not within a transaction. MSMQ negative acknowledgment message(s) have been handled. Queue:%1 Reason: The queue was deleted, after the message has arrived MSMQ negative acknowledgment message(s) have been handled. Queue:%1 Reason: The message was purged at the destination queue <br>e.g.<br> MSMQ negative acknowledgment message(s) have been handled. Queue:.\private$\Enterprise Vault Archiving Service for EXCHANGE Admin Queue Reason: The message was purged at the destination queue MSMQ negative acknowledgment message(s) have been handled. Queue:%1 Reason: Time to receive has expired, while the message is in the queue

A MSMQ negative acknowledgment message has been processed for a message of type 'PROCESS SYSTEM'. The Exchange system: %1 will not be automatically archived until the next archive scheduled period A MSMQ negative acknowledgment message has been processed for a message of type 'PROCESS MAILBOX'. The Exchange User Mailbox: %1 on the Exchange system: %2 will not be automatically archived until the next archive scheduled period A MSMQ negative acknowledgment was found to have no corresponding XACT Dead Letter Queue message, the message has been discarded

The journal mailbox, %1, has exceeded its storage quota limits. The journaling service will shut down. Please remove all storage quota limits from this mailbox.

A storage limit has been found on mailbox %1 Quota Type: %2 Quota Limit (K): %3 Quota Used (K): %4 (Note: This is the information store default for all mailboxes) A storage limit has been found on mailbox %1 Quota Type: %2 Quota Limit (K): %3 Quota Used (K): %4 (Note: The information store default has been overridden at the mailbox level)

Error whilst processing the mailbox %1 Unable to retrieve the Domain\Username string from the mailbox. Possible reasons include: 1. There is no Associated Account with the specified mailbox. 2. The users Domain controller is unavailable. Error returned : %2

The following message could not be archived by the Archive/Public Folder Service as it may be corrupt. Title: %1 Mailbox: %2 No further attempts will be made to archive this message. To override this, clear the "Do not archive this item" property on the message in the mailbox.

MSMQ negative acknowledgment message has been processed for a message of type 'RESTORE ITEM'. The TransactionID of the retrieval request was: %1 The savesetID was: %2 MSMQ negative acknowledgment message has been processed for a message of type 'SAVESET AVAILABLE'. The TransactionID of the retrieval request was: %1 The savesetID was: %2 MSMQ negative acknowledgment message has been processed for a message of type 'RESTORE OPERATION FAILED'. The TransactionID of the retrieval request was: %1 The savesetID was: %2

%1:CAgentSchedule::ProcessSchedule() Journal Service did not queue a Process Mailbox Message because the Process Mailbox mutex was locked. %1:CArchivingAgent::ProcessUser() Journal Service ignored a Process Mailbox Message because the Process Mailbox mutex was locked

Whilst post processing a message an error occurred in CArchivingAgent::PostProcessArchivedItem() whilst calling CExchangeShortcutAccessor::BuildFromSessionAndLocation(). <p> Error returned from BuildFromSessionAndLocation(): 80004005 Error returned from BuildFromSessionAndLocation(): %1

Failed to find configuration information for the %1 Agent in the Directory Service on computer %2 This could be because the service was deleted before completing all its outstanding work. Service entry id: %3

%1:KillAgentClientBroker() Running Lock not initialized Can't check the AgentClientBroker process as other processes may be running

While processing mailbox %1 the Storage Service reached its lower MSMQ threshold. The Archiving/Journaling Service will pause to let it recover.

Whilst archiving/restoring an item the call to establish if the user is the mailbox owner or an administrator failed. The message will be posted to the end of the queue and the retry count updated. %1:CArchivingAgent::ProcessUser() Archive/Journal Service ignored a Process Mailbox Message because the Process Mailbox mutex was locked and the mailbox is being processed by another thread While processing mailbox %1 the Storage Service reached its upper MSMQ threshold. The Archiving/Journaling Service will pause for %2 minutes to let it recover. The Storage Service is still at its upper MSMQ threshold. The Archiving/Journaling Service will pause for %1 minutes to let it recover. Mailbox %2 will be processed again when the service resumes processing. <br>e.g.<br> The Storage Service is still at its upper MSMQ threshold. The Archiving/Journaling Service will pause for 15 minutes to let it recover. Mailbox /O=ACME /OU=REO/CN=RECIPIENTS/CN=DOWDP will be processed again when the service resumes processing.

An exception has occurred in routine %1 caused by Collaboration Data Objects (CDO). This could be the result of undetected problems occurring when CDO.DLL was installed.

%1:CArchivingAgent::ArchiveFolder() As this is archive folder a special filter is used, some of this is set up from user choices from the desktop.

%1:CArchivingAgent::ArchiveFolder() Opening the message queue for writing. This handle is used later when posting processItem messages.

A MAPI or Message Queue error occurred within SetupAndCallQueueMsg. The error will be passed back to the caller. The error code was : %1

%1:CArchivingAgent::ArchiveFolder() The mailbox %2 is locked by another operation, this Archive Folder request will be reposted to the end of the queue.

%1:CArchivingAgentQueue::ArchiveFolderNoCallBack() Sending the Message Queue message MsgID_ArchiveItem with the constructed buffer

%1:CArchivingAgentQueue::ProcessPublicFolders() Checking callers Vault access privileges. User must be an administrator to perform this operation

The Public Folder service for %1 has started (%2) <br>e.g.<br> The Public Folder service for \ACME REO\ENG\Docs has started (5, 0, 0, 5562)

The Public Folder service for %1 could not be started due to startup errors <br>e.g.<br> The Public Folder service for \ACME\IT could not be started due to startup errors

Failed to read filter data required to process public folder \Acme Engineering\Support\Customer Communications\Down Brothers. <p> Make sure that all properties have been set in the Public Folders Enterprise Vault properties.An error has occurred whilst processing the Public Folder %1. Check the Event Log for any previous errors, as they may help determine the cause. Error: %2 <br>e.g.<br> An error has occurred whilst processing the Public Folder \ACME\Engineering\Users\Elwood P Dowd\. Check the Event Log for any previous errors, as they may help determine the cause. Error: 0x800B0001

Public Folder Report Date: %1 System Name: %2 Public Folder start point: %3 Number of archivable items (from start point): %4 Total size of archivable items (from start point): %5 KB Number of folders processed: %6 Number of items ready to archive: %7 Total size of items ready to archive: %8 KB Number of items that would be archived: %9 Total size of items that would be archived: %10 KB Number of expired shortcuts that would be deleted: %13 Start Time: %11 End Time: %12

%1:CArchivingAgent::ProcessAPublicFolder() Making all selected messages Archive Pending, and queuing a Process Item message to MSMQ for each message

A MSMQ negative acknowledgment message has been processed for a message of type 'ARCHIVE PUBLIC FOLDERS'. The public folders in the tree: %1 will not be automatically archived until the next public folder service scheduled period A MSMQ negative acknowledgment message has been processed for a message of type 'PROCESS A PUBLIC FOLDER'. The public folder with path: %1 will not be automatically archived until the next public folder service scheduled period

There is no valid license key installed. The %1 Service will not run until you install a license key. See the Administrator Help for information on license keys. Your Pilot license has expired. The %1 Service will not run until you install a new license key. See the Administrator Help for information on license keys.

Could not build a saveset for the message titled %1 in Mailbox %2, function %3 failed Error returned = %4 <br>e.g.<br> Could not build a saveset for the message titled in Mailbox /o=ACME/ou=REO/cn=ZKO/cn=Dowdp, function ISaveset::Store() failed <br> Error returned = 0xC0041AA6

%1:CArchivingAgent::CheckPublicFolders() There is no work to do as Expiry of shortcuts ands deletion of shortcuts by age are switched off

Error reading the legacy message store and mailbox distinguished names from active directory for mailbox %1 The service will now shut down Error reading the legacy message store and mailbox distinguished names from active directory for mailbox %1 The format of the JournalServiceEntry JournalingMailboxDn attribute is incorrect, it should be the active directory distinguished name of the journal mailbox not the Exchange 5.5 legacy mailbox distinguished name. The service will now shut down %1:CArchivingAgent::PostProcessArchivedItem() Unable to open the mailbox for the current item. The mailbox appears to have been deleted. The current item will be discarded. %1:AgentMessageDispenser::ProcessMessages() Unable to allocate enough memory for the wait handle array, the service will shut down due to an unrecoverable error. A MSMQ negative acknowledgment message has been processed for a message of type 'CHECK SYSTEM'. The Exchange system: %1 will not be automatically checked until the next scheduled period A MSMQ negative acknowledgment message has been processed for a message of type 'PROCESS MAILBOX 2K'. The Exchange User Mailbox: %1 on the Exchange system: %2 will not be automatically archived until the next archive scheduled period A MSMQ negative acknowledgment message has been processed for a message of type 'CHECK MAILBOX'. The Exchange User Mailbox: %1 on the Exchange system: %2 will not be automatically checked until the next scheduled period A MSMQ negative acknowledgment message has been processed for a message of type 'CHECK PUBLIC FOLDERS'. The Public Folders in tree: %1 will not be automatically checked until the next scheduled period The IRestorationAgent->RestoreItem() function failed whilst processing the item with TransactionID: %1, SavesetID: %2 Number of retries: %3 The retrieval request has failed because the associated Saveset could not be found on the spool queue. The retrieval request will now be discarded It is possible that the Saveset has been removed from the spool queue because it has not been received in time. <br>e.g.<br> The IRestorationAgent->RestoreItem() function failed whilst processing the item with TransactionID: 5123104F6ADC42AAB41C617FFE1A3FE, SavesetID: 101310000000000~200304180803140000~0~5303A7CBB67642ACAB2B555CEB49ED7 <br>Number of retries: 30 <br> The retrieval request has failed because the associated Saveset could not be found on the spool queue. The retrieval request will now be discarded <br> It is possible that the Saveset has been removed from the spool queue because it has not been received in time.

Unable to determine the version of the Exchange server %1, the service will shut down <br>For example:<br>Unable to determine the version of the Exchange server ACMEEXCH1, the service will shut down Could not get a MAPI session from the session pool whilst retrieving an item to a mailbox.<br> The following error was returned: c0040c62. CMailboxHelper::CreateSession() has failed to create a pointer to a MAPI Session. The service will now shut down due an unrecoverable error. CMailboxHelper::CreateSession() has been passed invalid parameters. The MAPI Session cannot be created successfully. The service will now shut down due to an unrecoverable error. A retrieval request has failed and it has not been possible to remove the item from the 'Enterprise Vault Spool Queue'. This item will remain on the queue. Please contact your support representative for further information. An error occurred while queuing a Process Mailbox message for the mailbox %1, in function CArchivingAgent::QueueAnotherProcessMailboxMsg()

Could not get a MAPI session when validating the public folder root path %1 The following error was returned: %2. Please check that the Exchange Server %3 is running and that the Vault Site account has the correct privileges. <br>e.g.<br> Could not get a MAPI session when validating the public folder root path \ACME\IT The following error was returned: 80040111. Please check that the Exchange Server ACMEEXCH1 is running and that the Vault Site account has the correct privileges. Folder %1 is unavailable. The folder may have been renamed or deleted, or the Exchange public information store may be unavailable.

The mailbox %1, has exceeded its "Prohibit Send & Receive" limit and cannot be processed. Maximum allowed: %2 KB Current level : %3 KB If you wish Enterprise Vault to archive items from this mailbox then this quota must be removed. <p>e.g.<br> The mailbox /O=ACME/OU=REO/CN=RECIPIENTS/CN=DOWDP, has exceeded its "Prohibit Send & Receive" limit and cannot be processed.<br> Maximum allowed: 4000 KB<br> Current level : 7000 KB<br> If you wish Enterprise Vault to archive items from this mailbox then this quota must be removed.

The Vault selected on the current folder no longer exists in the Vault Directory. This folder will be set to 'Do Not Archive' and all messages in this folder will be ignored until the folder settings are changed. <p> Details: <br> VaultId: <br>1BD1B1AF49AD8D311ACEE00508B070AE51110000huyton.zko.acme.com <br> Mailbox: /o=ACME/ou=ACMEENGINEERING/cn=ZKO/cn=dowdp <br> Folder: Deleted ItemsThe Vault selected on the current folder has a status that means the Vault cannot be used for Archiving. This folder will be set to 'Do Not Archive' and all messages in this folder will be ignored until the folder settings are changed. Details: Vault Name: %1 VaultId: %2 Status: %3 Mailbox: %4 Folder: %5 PF_CheckVaultAvailability has been unable to determine the current Vaults status. Details: VaultId: %2 Mailbox: %3 Folder: %4 Reason: %1 <br>e.g.<br> PF_CheckVaultAvailability has been unable to determine the current Vaults status. Details: VaultId: 1D5A96DEEBB68D61183B000508B319C691110000vault.acme.com Mailbox: /o=ACME/ou=ENGINEERING/cn=Recipients/cn=Journal Folder: Top of Information Store Reason: Not enough storage is available to complete this operation. [0x8007000e]An error occurred whilst setting a folders properties to 'Do Not Archive'. See previous warnings for reason. Details: Mailbox: %1 Folder: %2 Error returned : %3

%1:CArchivingAgent::WriteWorkItemsToQueue() The Vault specified for the current message cannot be found in the Vault Directory. Details: Mailbox: %1 VaultId: %2 Message: %3 %1:CArchivingAgent::WriteWorkItemsToQueue() The Vault specified for the current message has returned the status : %2. Details: VaultId: %3 Mailbox: %4 Message: %5

%1:CArchivingAgent::WriteWorkItemsToQueue() Call to MakeItemPendingAndQueueMsg() failed Mailbox: %2 Message: %3 Error Returned: %4

The public folder with path name: %1 is marked as a public folder root path. The site id of the public folder service processing this folder is %2 The following message could not be archived by the Journaling Service as it may be corrupt. Title: %1 Mailbox: %2 No further attempts will be made to archive this message. The message has been moved to the 'Enterprise Vault Journaling Service\Failed to copy' folder. <font face="Courier New"><span class="FIXEDFONT">The following message could not be archived by the Journaling Service as it may be corrupt. </span><br /><tt><span class="FIXEDFONT">Title: %1</span></tt></font><br /><tt><span class="FIXEDFONT">Mailbox: %2 </span></tt><br /><br /><tt><span class="FIXEDFONT">An error occurred whilst moving the message to the 'Enterprise Vault Journaling Service\Failed to copy' folder. The message has been marked as "Do Not Archive", and no further attempts will be made to archive this message.</span></tt><br />A MSMQ negative acknowledgment message has been processed for a message of type 'PROCESS FOLDER'. The archive folder request for the mailbox %1 will not be processed CArchivingAgent::processMessages() Processed all existing messages in folder. The remaining working copies will be ignored. Exchange User: %1 Items processed: %2 %1:CArchivingAgent::GetUserQuotaValues() Could not read all the mailbox attributes needed to determine the user's quota values. Quotas may be defaulted to zero. Mailbox: %2

Unable to determine the version of the Exchange server ACMEEXCH1, the service will shut down <p> Reason: Unable to connect to the computer

The public folder service named: %1 could not access the public folder with path: %2. Reason: The contents of this public folder are currently unavailable. Either the Microsoft Exchange Server computer servicing this public folder is down or the public folder service does not have privileges to access this folder

%1:CArchivingAgent::PF_SetFilterAndRetention() The current folder filter for the folder %2, will be overridden as its parent folders filter was set by the mailbox configuration tool %1:CArchivingAgent::IsEligibleForArchive(%3) The message titled %2 will be converted from the pre-V3.5 shortcut message class and is NOT eligible for archive %1:CArchivingAgent::IsEligibleForArchive(%3) The message titled %2 will be converted from the pre-V3.5 pending archive message class and is NOT eligible for archive

The public folder with path name: %1 is already marked as a public folder root path by a different Vault Site. The site id of the public folder service processing this folder is %2. %1:CArchivingAgent::IsEligibleForArchive(%3) The message titled %2 will not converted from the pre-V3.5 vault item as all clients have not been upgraded this item is NOT eligible for archive An error occurred whilst processing the message titled: %1 for mailbox: %2, the message will not be archived as it is a V3.5 Enterprise Vault item being archived by a V3.0 Enterprise Vault client.

The user: %1 attempted to archive a message to the vault named: %2. The message could not be archived as the user has exceeded their vault quota limit.

%1:CArchivingAgent::DoMailboxAndVaultSynchronisation() Synchronizing mailbox owner to have control access to vault, user: %2, vault: %3.

An error occurred whilst enabling the public folder %1 for archiving. The error occurred whilst applying the filter and retention category to the public folder. Error: %2 The following folders have exactly the same Vault properties: (a) %1 (b) %2 Possible causes (and their outcome) of this problem: 1) Public folder (a) is a copy of (b). A new Vault will be created for the public folder (a) 2) Public folder (a) has been renamed and a new folder (b) created with the original pathname. The original Vault for folder (a) will no longer have its permissions automatically synchronized and items in this folder may not be available to all its subscribers. A new Vault will be created for both public folders (a) and (b).

An error occurred whilst checking the site Id for the mailbox %1. This mailbox will not be processed. Error: %2 <br>e.g.<br> An error occurred whilst checking the site Id for the mailbox /O=ACME/OU=US-ACME/CN=LOADSIM/CN=EXUSNY1-OUTL1912. This mailbox will not be processed. Error: 0x2F1E344%1:CArchivingAgent::ProcessUser(cont) Mailbox %2 Messages processed: %3 Messages still to process: %4 Queued another ProcessMailbox request

%1:CArchivingAgent::ProcessUser(cont) Mailbox %2 Messages processed: %3 Messages still eligible: %4 Not running in continuous mode An error occurred whilst enabling the public folder %2 for archiving. The error occurred whilst applying the vault identifier to the public folder. Error: %1 An error occurred whilst enabling the public folder %1 for archiving. The error occurred whilst creating the vault for the public folder. Error: %2

An error occurred whilst checking mailbox %1 to see if it is hidden in the address book or has previously been deleted. A Process Mailbox Message will not be queued for this mailbox. Error: %2

Could not start the Public Folder Service. You must create an index for the service's default Vault Store. See the description of upgrading Enterprise Vault servers in the ReadMe section of the Administrator help.

Could not determine the default system codepage. To process all messages, regardless of their native language, set the following DWORD registry key to the value "2" and restart the service: HKLM\Software\KVS\Enterprise Vault\Agents\CodepageProcessing An error occurred whilst creating a vault for /o=exchange/ou=First Administrative Group/cn=Recipients/cn=User.One during an Enable Mailbox. Error: 'Will vary depending on failure' An error occurred whilst enabling archiving for the mailbox %2 Error: %1 <br>e.g. An error occurred whilst enabling archiving for the mailbox /o=First Organization/ou=First Administrative Group/cn=Recipients/cn=test2 <br> Error: Unspecified error [0x80004005]

Failed whilst initializing the Filter Controller. The agent will now shut down as it cannot reliably continue. Error: %1 <br>For example:<br> Failed whilst initializing the Filter Controller. The agent will now shut down as it cannot reliably continue. <br> Error: Catastrophic failure [0x8000ffff]An error occurred processing the external filter '%2'. No more filters will be processed and no action will be taken against the current message. Error: %1 Failed to initialize the external filter with ProgId '%1'. Either the ProgId is incorrect or the DLL has not been registered. Please check the ProgId or register the DLL for the external filter. An error has occurred initializing the external filter '%2'. Error: %1 <br>e.g.<br> An error has occurred initializing the external filter 'KVS.Accelerator.PlugIn.Filter'. <br> Error: Catastrophic failure [0x8000ffff] <br> An exception in the Filter Controller has occurred in routine: %1 <BR>e.g.<br> An exception in the Filter Controller has occurred in routine: CEVFilterController/gCMEx/e1

The service cannot start because the Filter Controller (EVFilterController.dll) doesn't appear to be registered on this system. Please register the DLL and restart the service Error: %1

An error has occurred in the Distribution List caching object. [Internal reference %1] <br>e.g.<br> An error has occurred in the Distribution List caching object.<br> [Internal reference CDLCache::/CC<br>(/O=ACME/OU=ZKO/CN=SYSTEM DISTRIBUTION LISTS/CN=SALES )/e2/6] <br> The Selective Journal filter could not successfully add a processing instruction due to an error. This instruction will be ignored. File: %2 Line: %3 Inst: %4%5 Error: %1

Start to process the Exchange system %1 (in report mode). <br>e.g.<br> Start to process the Exchange system ACMEEXCH1 (in report mode).

Summary for shortcut deletion. Mailbox: '%1': Total number of shortcuts found: %2 Number of orphaned shortcuts deleted: %3 Number of old shortcuts deleted: %4 Total number of shortcuts remaining: %5 Summary for shortcut deletion. Public folder '%1' and its sub-folders: Total number of shortcuts found: %2 Number of orphaned shortcuts deleted: %3 Number of old shortcuts deleted: %4 Total number of shortcuts remaining: %5

An error occurred initializing the COM objects required. %1 <br>e.g.<br> An error occurred initialising the COM objects required. <br> The server is not operational. [0x8007203a]

A MSMQ negative acknowledgment message has been processed for a message of type 'ARCHIVEFOLDERACTION'. The archive folder request for the mailbox %1, on folder %2 will not be processed A MSMQ negative acknowledgment message has been processed for a message of type 'ARCHIVEMARKEDITEMS'. The request to archive items in folder %2 of mailbox %1 will not be processed A MSMQ negative acknowledgment message has been processed for a message of type 'DELETEMARKEDITEMS'. The request to delete items in folder %2 of mailbox %1 will not be processed A MSMQ negative acknowledgment message has been processed for a message of type 'RETRIEVEMARKEDITEMS'. The request to retrieve items in folder %2 of mailbox %1 will not be processed

An ArchiveMarkedItems request has failed. Not all of the messages could be returned to their original state. These messages will remain as pending archive in the users mailbox. Mailbox: %2 Folder: %3 Error: %1 A DeleteMarkedItems request has failed. Not all of the messages could be returned to a shortcut. These messages will remain as delete pending in the users mailbox. Mailbox: %2 Folder: %3 Error: %1

<br>e.g.<br> A RetrieveMarkedItems request has failed. Not all of the messages could be returned to a shortcut. These messages will remain as pending retrieval in the users mailbox. Mailbox: /o=Dowd Elwood <br> Folder: Inbox <br> Error: <0x8004011c> <br>

A MSMQ negative acknowledgment message has been processed for a message of type 'PROCESS MAILBOX EX'. The Exchange User Mailbox: %1 on the Exchange system: %2 will not be automatically archived until the next archive scheduled period <br>e.g.<br> A MSMQ negative acknowledgment message has been processed for a message of type 'PROCESS MAILBOX EX'. The Exchange User Mailbox: /O=ACME/OU=ZKO/CN=RECIPIENTS/CN=ELWOODP on the Exchange system: /o=Acme/ou=ZKO/cn=Configuration/cn=Servers/cn=EXCHANGE/cn=Microsoft Private MDB will not be automatically archived until the next archive scheduled periodA MSMQ negative acknowledgment message has been processed for a message of type 'PROCESS SYSTEM EX'. The Exchange system: %1 will not be automatically archived until the next archive scheduled period A MSMQ negative acknowledgment message has been processed for a message of type 'ARCHIVE PUBLIC FOLDERS EX'. The public folders in the tree: %1 will not be automatically archived until the next public folder service scheduled period A MSMQ negative acknowledgment message has been processed for a message of type 'PROCESS A PUBLIC FOLDER EX'. The public folder with path: %1 will not be automatically archived until the next public folder service scheduled period Summary of recipients removed from shortcuts: Mailbox: '%1': Total number of shortcuts: %2 Total number of shortcuts with recipients: %5 Number of shortcuts updated: %3 Number of shortcuts not updated: %4 Summary of recipient added to shortcuts: Mailbox: '%1': Total number of shortcuts: %2 Total number of shortcuts without recipients: %5 Number of shortcuts updated: %3 Number of shortcuts not updated: %4 Summary of message texts added to shortcuts: Mailbox: '%1': Total number of shortcuts: %2 Total number of shortcuts without message text: %5 Number of shortcuts updated: %3 Number of shortcuts not updated: %4 Summary of message texts removed from shortcuts: Mailbox: '%1': Total number of shortcuts: %2 Total number of shortcuts with message text: %5 Number of shortcuts updated: %3 Number of shortcuts not updated: %4

An error occurred performing a request to synchronize the mailbox %2. Error: %1 <p>e.g.<br> An error occurred performing a request to synchronize the mailbox /o=ACME/ou=ZKOEUROPEENGINEERING/cn=SUP REO/cn=DOWDP. <p> Error: The MAPI error MAPI_E_FAILONEPROVIDER (0x8004011D) has occurred whilst synchronizing the properties of mailbox . The mailbox will not be synchronized until the next scheduled run. [0xc0040ccd]A MSMQ negative acknowledgment message has been processed for a message of type 'SYNCHRONIZE MAILBOX'. The Exchange User Mailbox: %1 will not be automatically synchronized until the next scheduled time. A MSMQ negative acknowledgment message has been processed for a message of type 'SYNCHRONIZE SYSTEM'. The Exchange system: %1 will not be automatically synchronized until the next scheduled time.

An error has occurred listing mailboxes on Exchange Server %2 for synchronization. Error: %1 Internal: %3 <br>e.g.<br> An error has occurred listing mailboxes on Exchange Server ACMEEXCH1 for synchronization. <br> Error: The parameter is incorrect. [0x80070057] <br> Internal: AgentExchSynch.cpp (CAgentExchSynch::ListMailboxesExchange2k) [lines {1105,1109,1144}] built Mar 4 14:22:44 2004 An error has whilst synchronizing the properties of mailbox %2. Error: %1 Internal: %3 <br>e.g.<br> An error has whilst synchronizing the properties of mailbox /o=ACME/ou=Messaging Administrative Group/cn=Recipients/cn=DowdP. <br>Error: The server is not operational. [0x8007203a]

Starting synchronization run of %2 mailboxes on Exchange server %1 <br>e.g.<br> Starting synchronization run of all mailboxes on Exchange server ACMEEXCH1

A MSMQ negative acknowledgment message has been processed for a message of type 'MARK DELETED MAILBOXES'. Mailbox entries for exchange server %1 will not be processed to determine if they have been deleted until the next schedule.

An ArchivePublicFolderItems request has failed. Not all of the messages could be returned to their original state. These messages will remain as pending archive in the public folder. Caller: %2 Public Folder: %3 Error: %1 A DeletePublicFolderItems request has failed. Not all of the messages could be returned to a shortcut. These messages will remain as delete pending in the public folder. Caller: %2 Public Folder: %3 Error: %1

A RetrievePublicFolderItems request has failed. Not all of the messages could be returned to a shortcut. These messages will remain as pending retrieval in the public folder. Caller: %2 Public Folder: %3 Error: %1 A MSMQ negative acknowledgment message has been processed for a message of type 'ARCHIVEPUBLICFOLDERITEMS'. The request to archive items in public folder %2 by mailbox %1 will not be processed A MSMQ negative acknowledgment message has been processed for a message of type 'DELETEPUBLICFOLDERITEMS'. The request to delete items in public folder %2 by mailbox %1 will not be processed A MSMQ negative acknowledgment message has been processed for a message of type 'RETRIEVEPUBLICFOLDERITEMS'. The request to retrieve items in public folder %2 by mailbox %1 will not be processed

An error occurred accessing the mailbox %2 Error: %1 The location and content of the file 'mapisvc.inf' could be a possible cause of this error. Could not detect the MSMQ service. Error: %1 Check that the MSMQ services are running. <br>e.g.<br> Could not detect the MSMQ service. Error: 0xC00E0014 Check that the MSMQ services are running. User {Account name} failed to access an item located in vault {Vault Name} due to insufficient privileges. <p> A frequent cause of this error is a user attempting to open a shortcut that has been forwarded but points to a vault where they do not have the appropriate access.[%1] User %2 is enabled for Offline Vault. Site and mailbox settings will be overridden as follows: Shortcut creation will be forced Shortcut expiry will be prevented Unable to connect to the Exchange Store to enable mailbox %1 The most likely cause is the Vault Service account not having Send As & Receive As permissions on the Exchange Server %2 Unable to connect to the Exchange Store to disable mailbox %1 The most likely cause is the Vault Service account not having Send As & Receive As permissions on the Exchange Server %2

Failed to list mailbox permissions whilst synchronizing due to a missing Active Directory attribute. User: %1 Attribute: %2 <br>e.g.<br> Failed to list mailbox permissions whilst synchronizing due to a missing Active Directory attribute. User: CN=Elwood Dowd,OU=Users,OU=ZKO,OU=Sites,OU=US OUs,DC=KVS,DC=local Attribute: msExchMailboxSecurityDescriptor

Timed out whilst waiting for the MAPI profile mutex Exchange Server: %1 MutexName: %2 Reason: %3 <p>e.g.<br> imed out whilst waiting for the MAPI profile mutex Exchange Server: NYC MutexName: EnterpriseVaultProfileMutex 1A7469D53DE17814FBFC793D5AB682F1E1i10000acme.com Reason: WAIT_TIMEOUT** This is an example of the event. Some details will be different **<p> Could not get a MAPI session from the session pool. <p> Error: <0x80040115> <br> Service: Enterprise Vault Journaling Service for ACMEEXCH1 <br> Additional Information: <br> Whilst processing user /o=ACME/ou=ZKO/cn=Recipients/cn=E2K MAILBOXES/cn=DOWDEP Enterprise Vault has detected a recursive distribution list. No action is necessary but it is suggested the distribution list is checked and fixed. Display name: %1 Distinguished name: %2 An error has occurred in the service %1 whilst trying to synchronize mailbox properties. Possible cause: The exchange privileged mailbox associated with this service does not exist or is unavailable.

Error reading the legacy message store and mailbox distinguished names from active directory for mailbox %1 The format of the JournalServiceEntry JournalingMailboxDn attribute is incorrect, it should be the active directory distinguished name of the journal mailbox not the Exchange 5.5 legacy mailbox distinguished name. The service successfully obtained the legacy message store and distinguished name for a mailbox where a previous attempt had failed. The service will proceed to process messages in journal mailbox %1

The service successfully opened a store that had failed on a previous attempt. The service will proceed to process messages in journal mailbox %1

A mailbox that was previously set to disabled or suspended has now become available. The service will proceed to process messages in journal mailbox %1

There have been %1 MAPI errors in the last %2 minutes, the Enterprise Vault %3 Service for %4 will be restarted. All other services of this type hosted on the local machine will be restarted. There have been %1 MAPI errors in the last %2 minutes, the Enterprise Vault %3 Service for %4 will be restarted. All other Agent services hosted on the local machine will be restarted. There have been %1 MAPI errors in the last %2 minutes, the Enterprise Vault %3 Service for %4 will be restarted. All other Agent, and any Storage, services hosted on the local machine will be restarted. There have been %1 MAPI errors in the last %2 minutes, the Enterprise Vault %3 Service for %4 will be restarted. All other Enterprise Vault services hosted on the local machine will be restarted.

The following message could not be archived by the Archive/Public Folder Service as it may be corrupt. Title: %1 Mailbox: %2 If you see this warning repeatedly contact KVS Support. <p>e.g.<br> The following message could not be archived by the Archive/Public Folder Service as it may be corrupt. <p> Title: Fwd: Mark in ZKO<br> Mailbox: /o=acme/ou=ZKOEUROPEENGINEERING/cn=SUP REO/cn=Dowdp If you see this warning repeatedly contact KVS Support. The following message could not be archived by the Archive/Public Folder Service due to message complexity. Title: %1 Mailbox: %2 No further attempts will be made to archive this message. To override this, clear the "Do not archive this item" property on the message in the mailbox. %1:CRestorationAgent::UpdateShoppingBasket() Exiting routine as we have failed. The message will not be requeued Error Returned %2

The number of items pending indexing for the archive has grown above the threshold limit. This service will pause for 5 minutes to allow the backlog to clear. Mailbox: %1 Archive Name: %2 Archive Id: %3 Service: %4 <p>e.g.<br> The number of items pending indexing for the archive has grown above the threshold limit. This service will pause for 5 minutes to allow the backlog to clear. <p> Mailbox: /o=ACME/ou=REO/cn=Recipients/cn=journal <br> Archive Name: Journal <br> Archive Id: 43ITR8E453A1ED611BE120002A58CDB441110000ACME.COM<br> Service: Enterprise Vault Journaling Service for ACMEEXCH1<br> An invalid retention category was detected during an archive operation. Items relating to this folder have not been processed. Folder: %2 Mailbox: %1

Failed to open distribution list [#London ACME IT].<br> Error: Access is denied. [0x80070005] LegacyDN: /o=ACME/ou=LDN/cn=Recipients/cn=?London ACME IT <br> Check that the vault administration account has the correct access rights to this distribution listUnable to find per user information in saveset. Item has been retrieved but some information may be incorrect. Your Enterprise Vault system should be checked for consistency. Contact your local KVS Support representative for further information. VaultID: %1 SavesetID: %2 The following message could not be archived by the Journaling Service because of its codepage. Title: %1 Mailbox: %2 No further attempts will be made to archive this message. The message has been moved to the 'Enterprise Vault Journaling Service\Failed Codepage nnn' folder, where nnn is the codepage number causing the failure. The following message could not be archived by the Journaling Service because of its codepage. Title: %1 Mailbox: %2 An error occurred whilst moving the message to the 'Enterprise Vault Journaling Service\Failed Codepage' folders. The message has been marked as "Do Not Archive", and no further attempts will be made to archive this message. The following message could not be archived by the Journaling Service because distribution list expansion failed. <p> Title: Script review<br> Mailbox: /o=ACME/ou=ZKO/cn=Recipients/cn=E2K <br> MAILBOXES/cn=STEWART <p> No further attempts will be made to archive this message. The message has been moved to the 'Enterprise Vault Journaling Service\Failed DL Expansion' folder.The following message could not be archived by the Journaling Service because distribution list expansion failed. Title: %1 Mailbox: %2 An error occurred whilst moving the message to the 'Enterprise Vault Journaling Service\Failed DL Expansion' folder. The message has been marked as "Do Not Archive", and no further attempts will be made to archive this message. An error occurred processing the external filter '%2'. No more filters will be processed. Error: %1 Mailbox: %3 Message Folder: %4 Message Title: %5 <p>e.g.<br> An error occurred processing the external filter 'KVS.Accelerator.PlugIn.Filter'. No more filters will be processed. <br> Error: No such interface supported [0x80004002] <br> Mailbox: /O=ACME/OU=ZKO/cn=Recipients/cn=Journal-ACME <br> Message Folder: ?Inbox <br> Message Title: Tournament <br><p>e.g.<br> The following message could not be processed by an external filter and has been moved to Journaling Service\Failed External Filter. <br> Mailbox: /O=ACME/OU=ZKO/cn=Recipients/cn=ACME-JOURNAL <br> Title: Tournament <Br> <br> No further attempts will be made to process this message. Mailbox: %1 Title: %2 No further attempts will be made to process this message.

The Service Enterprise Vault %2 for %3 has been configured to restart at the current level of %1 operations. The configuration also specifies that all other services of this type hosted on the local machine be restarted. The Service Enterprise Vault %2 for %3 has been configured to restart at the current level of %1 operations. The configuration also specifies that all other Agent services on the local machine be restarted. The Service Enterprise Vault %2 for %3 has been configured to restart at the current level of %1 operations. The configuration also specifies that all other Agent, and any Storage services on the local machine be restarted. The Service Enterprise Vault %2 for %3 has been configured to restart at the current level of %1 operations. The configuration also specifies that all other Enterprise Vault services hosted on the local machine be restarted.

Unable to send a 'Approaching Vault Quota Limit' notification message. Possible Reason: The message file could not be found. Please refer to 'Editing the Vault Quota Message' in the Administration Help for more information on editing and copying the enabled message file. Unable to send a 'Reached Vault Quota Limit' notification message. Possible Reason: The message file could not be found. Please refer to 'Editing the Vault Quota Message' in the Administration Help for more information on editing and copying the enabled message file. An invalid retention category was detected during an archive operation. Items relating to this folder have not been processed. Mailbox: %1 The MAPI error MAPI_E_FAILONEPROVIDER (0x8004011D) has occurred whilst synchronizing the properties of mailbox /o=First Organization/ou=First Administrative Group/cn=Recipients/cn=testdisabled. The mailbox will not be synchronized until the next scheduled run. AgentExchSynch.cpp (CAgentExchSynch::OpenUserAndStore) [lines {1407,1414,1419,1423,1449,1455}] built Feb 11 13:30:13 2004

e.g. Could not filter a message for Accelerator random message sampling. <br> Error: No such interface supported [0x80004002] <br> Internal References: <br> Call error 0x80004002<br> Filter.cpp (CFilter::GetRecipientAuthorInfo) [lines {174,177,179,185,188,197}] built Mar 23 19:23:43 2004

Summary of categories added to shortcuts: Mailbox: '%1': Total number of shortcuts: %2 Total number of shortcuts without categories: %5 Number of shortcuts updated: %3 Number of shortcuts not updated: %4 The index for the indicated archive has become full. Archiving will cease until a new archive is created. Archive: %1 Mailbox\Folder: %2 ArchiveID: %3 The folder has %1 permissions set that grant all users access to this folder. By default this has not been synchronized to the users archive. MailboxDn: %2 FolderPath: %3The folder has %1 permissions set that grant all users access to this folder. By default this has not been synchronized to the users archive. MailboxDn: %2 FolderPath: %3

e.g. A problem has occured while archiving a message. The archived item was not found or is no longer archive pending. Users mailbox dn: /o=ACME/ou=ZKO/cn=Remote Users/cn=DOWDEP Internal reference: CArchivingAgent::MakeItemPendingAndProcessMsg()A problem has occured while archiving a message. The archived item was not found or is no longer archive pending. Users mailbox dn: %1 Internal reference: %2

Failed to determine a policy for the mailbox %2. The mailbox will not be processed. This is most likely due to the mailbox not being synchronized with Enterprise Vault. Make sure new mailboxes have been synchronized. Error: %1

Task: %1 There are no target paths available for processing. The folder(s) may have been renamed, deleted, or the Exchange public information store may be unavailable.

The Archiving task '%1' against %2 has stopped <br>e.g.<br> The Archiving task 'Mailbox Archiving Task for EXEU3' against EXEU3 has stopped The Archiving task '%1' against %2 has started (%3) <br>e.g.<br> The Archiving task 'Mailbox Archiving Task for EXEU2' against EXEU2 has started (6.0.0.1111) The Journal task '%1' against %2 has started (%3) For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp The Public Folder task '%1' against %2 has started (%3) For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp The task '%1' failed to start due to incorrect user permissions For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp The task '%1' failed to start, probably due to incorrect user permissions For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp The MAPI error MAPI_E_FAILONEPROVIDER (0x8004011D) occurred when opening the mailbox message store during a synchronisation. This generally occurs when the mailbox has been deleted. For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp Starting to process the Public Folder task '%1' against %2. For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp Starting to process the Public Folder task '%1' against %2 (in report mode). For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp The task '%1' failed to log on to Exchange server '%2' using mailbox '%3'. Please ensure that the server is running and that the Vault Service account has sufficient permissions on the server. <br>e.g.<br> The task 'Mailbox Archiving Task for ACME1' failed to log on to Exchange server 'ACME1' using mailbox 'EnterpriseVault-ACME1'. Please ensure that the server is running and that the Vault Service account has sufficient permissions on the server. The number of items pending indexing for the archive has grown above the threshold limit. This Task will pause for %1 minute(s) to allow the backlog to clear. Task: %5 Target: %2 Archive Name: %3 Archive Id: %4 For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp An error occurred while processing shortcuts for the target %1 For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp Could not scan public folder %1, cannot list messages For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp Could not scan public folder %1, cannot list messages For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp There was a problem accessing a network service or resource. The dispenser will re-queue the current item and sleep for %1 minute(s). For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp SMTP Mail Archiving has started successfully. For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp SMTP Mail Archiving encountered a serious error during initialization and is unable to operate correctly. Incoming messages will not be captured by Enterprise Vault and will be saved in the SMTP server 'drop' directory or relayed to another server. Please restart the IIS Admin service and reconfigure SMTP Mail Archiving. For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp SMTP Mail Archiving encountered a serious error resulting in the loss of a message. Last error: %1 Message ID: %2 Sender: %3 Recipients: %4 Last filename: %5 For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp SMTP Mail Archiving failed to save a captured message because the disk is full. Retry will occur every %1 seconds until the message is saved. This may result in a backlog of messages in the SMTP queue. Message ID: %2 Sender: %3 Recipients: %4 Last filename: %5 For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp SMTP Mail Archiving is continuing to attempt to save a message that failed because the disk is full. Retry will continue every %1 seconds until the message is saved. This may result in a backlog of messages in the SMTP queue. Message ID: %2 Sender: %3 Recipients: %4 Last filename: %5 For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp SMTP Mail Archiving has successfully saved a message that initially failed because the disk was full. Message ID: %1 Sender: %2 Recipients processed: %3 Last filename: %4 For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp SMTP Mail Archiving encountered a serious error and was unable to abort the transport of a captured message. The message will be saved in the SMTP server 'drop' directory or relayed to another SMTP server. Message ID: %1 Sender: %2 Recipients: %3 For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp SMTP Mail Archiving required a server-level default folder to save a captured message but one was not specified. The captured message will be deleted. Reconfigure SMTP Mail Archiving to use a server-level default folder. Message ID: %1 Sender: %2 Recipients: %3 For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp SMTP Mail Archiving reached the retry limit (%1) for a message that was not saved because the disk is full. The message will be deleted. Message ID: %2 Sender: %3 Recipients: %4 Last folder: %5 For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp SMTP Mail Archiving failed to load because a valid license key is not installed. Incoming messages will not be captured and will be delivered to the SMTP drop directory or relayed to another server. See the documentation for information on license keys. For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp The 'CodepageDetection' registry key is not compatible with the Outlook 2003 MAPI dll. As a result some services will not start. For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp This Task will suspend processing for %1 minute(s) to allow the Storage service(s) time to catch up. Task: %2 For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp This Task will resume processing. Task: %1 For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp There was a COM error in the journal reporting component. Error: %1 Internal References: %2 %3 For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp There was an error in the journal reporting component. Error: %1 For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp Failed to enable a user mailbox. The system reported 'An invalid directory pathname was passed', this may be because a new user or mailbox has not yet been fully initialized or an existing user or mailbox may have been recently deleted. Task: %2 Mailbox: %1 See the help topic called 'Problems enabling mailboxes' for details of the permissions you need to enable mailboxes. For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp Failed to enable a user mailbox. This could be due to insufficient permissions or the mailbox may have been deleted. Mailbox: %1 See the help topic called 'Problems enabling mailboxes' for details of the permissions you need to enable mailboxes. For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp Failed to disable a user mailbox. This could be due to insufficient permissions or the mailbox may have been deleted. Mailbox: %1 See the help topic called 'Problems enabling mailboxes' for details of the permissions you need to disable mailboxes. For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp The task controller cannot start the following MAPI-dependent tasks because the required version of MAPI is missing or incorrectly configured on the Enterprise Vault server: %1 To resolve the problem: 1. Stop all Enterprise Vault services and processes that are using MAPI. 2. Ensure that a version of MAPI supplied with Microsoft Outlook 2003 or later is installed and correctly configured on the Enterprise Vault server. 3. Restart the Enterprise Vault services. If the problem persists, see the "Troubleshooting" section of the Enterprise Vault Administration help file for guidelines on how to proceed. For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp Cannot start the task because MAPI is incorrectly configured on the Enterprise Vault server. See the "Troubleshooting" section of the Enterprise Vault Administration help file. For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp A new public folder target has been successfully associated with an existing archive. Task:%1 Target:%2 Archive:%3 For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp The temporary transaction identifier cannot be read or written to a message. Archiving and external filtering may not be able to identify the message as a retry if it requires subsequent archive attempts. Error: %1 Internal References: %2 %3 For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp This mailbox has duplicate entries in the directory and cannot be processed. LegacyDN: %1 DefaultVaultID: %2 For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp The default archive defined in this mailbox is already associated with a different mailbox. LegacyDN: %1 DefaultVaultID: %2 For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp <p>e.g.</p><font size="1"> <p><font size="2">Summary for shortcut deletion.</font></p> <p><font size="2">Mailbox: '/o=Enterprise/ou=MDH/cn=ADC/cn=Users/cn=Elwood Dowd':</font></p> <p><font size="2">Total number of shortcuts found: 5132</font></p> <p><font size="2">Number of expired shortcuts deleted: 157</font></p> <p><font size="2">Number of orphaned shortcuts deleted: 0</font></p> <p><font size="2">Number of old shortcuts deleted: 303</font></p> <p><font size="2">Total number of shortcuts remaining: 4672</font></p></font>Summary for shortcut deletion. Public folder '%1': Total number of shortcuts found: %2 Number of expired shortcuts deleted: %3 Number of orphaned shortcuts deleted: %4 Number of old shortcuts deleted: %5 Total number of shortcuts remaining: %6 For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp Enterprise Vault has detected an instance of mailbox DN reuse. Mailbox: %1 Default Vault Id: %2 Exchange Server: %3 Enterprise Vault detected that a mailbox enabled for archiving had been deleted from Exchange and another was subsequently created with the same DN. A fresh entry will be added to Enterprise Vault for the new mailbox. For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp The message being processed is not marked as pending archive and will not be archived. Mailbox: %1 Folder: %2 Subject: %3 Message Class: %4 For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp

Error getting an IMessage interface from an IUnknown pointer. For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp

There was an error applying a change to DeleteOriginal or CancelPending due to an External Filter policy change on the message. Mailbox: %1 Folder: %2 MessageSubject: %3 LogMessage: %4 For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp Mailbox Report Date: %1 System Name: %2 Mailbox Name: %3 Associated Account: %13 Policy: %28 Mailbox State: %20 Mailbox Quota Limit: %14 KB Mailbox Quota Used: %15 KB Percentage of Mailbox Quota free: %16 Number of archivable items in mailbox: %4 Total size of archivable items in mailbox: %5 KB Number of archivable folders in mailbox: %6 Number of items ready to archive: %7 Total size of items ready to archive: %8 KB Number of items that would be archived: %9 Total size of items that would be archived: %10 KB Number of expired shortcuts that would be deleted: %17 Number of orphaned shortcuts that would be deleted: %18 Number of old shortcuts that would be deleted: %19 Start Time: %11 End Time: %12 For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp Public Folder Report Date: %1 System Name: %2 Public Folder start point: %3 Policy: %23 Number of archivable items (from start point): %4 Total size of archivable items (from start point): %5 KB Number of folders processed: %6 Number of items ready to archive: %7 Total size of items ready to archive: %8 KB Number of items that would be archived: %9 Total size of items that would be archived: %10 KB Number of expired shortcuts that would be deleted: %13 Number of orphaned shortcuts that would be deleted: %14 Number of old shortcuts that would be deleted: %15 Start Time: %11 End Time: %12 For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp Mailbox Report Date: %5 System Name: %1 Mailbox Name: %2 Associated Account: %3 Policy: %12 Mailbox State: %4 Number of shortcuts where no action was taken: %11 Number of expired shortcuts that would be deleted: %8 Number of orphaned shortcuts that would be deleted: %9 Number of old shortcuts that would be deleted: %10 Start Time: %6 End Time: %7 For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp Public Folder Report Date: %3 System Name: %1 Public Folder start point: %2 Policy: %10 Number of shortcuts where no action was taken: %9 Number of expired shortcuts that would be deleted: %6 Number of orphaned shortcuts that would be deleted: %7 Number of old shortcuts that would be deleted: %8 Start Time: %4 End Time: %5 For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp No policy information recorded for this mailbox. Provisioning synchronization may be required. For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp The archive task found mailboxes that have not been processed by the provisioning task. The archive task is ignoring these mailboxes. To log the names of these mailboxes to the event log, reset the 'HideMissingPolicyInfoErrors' registry value to 0. See the documentation for further details. Task: %1 For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp A new mailbox already has an entry in the Enterprise Vault database. New mailbox: %1 Existing entry: %2 Reason for conflict: %3 Set the SynchInMigrationMode registry value in order to process this mailbox. See the documentation for further details. For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp A new mailbox was linked to an existing entry in the Enterprise Vault database. New mailbox: %1 Existing entry: %2 Wait until the archive task has finished processing, then reset the SynchInMigrationMode registry value. See the documentation for further details. For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp A new entry in the Enterprise Vault database has been created for a new mailbox that had an existing entry in the database. The existing entry has been renamed. New mailbox: %1 Existing entry renamed to: %2 Reset the SyncInMigrationMode registry value after all affected mailboxes have been processed. See the documentation for further details. For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp This mailbox cannot be processed until the Exchange Provisioning Task has processed the corresponding user's details. Ensure that a Provisioning Group includes this user and run the Provisioning Task. For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp This mailbox already has an entry in the Enterprise Vault database. Set the SynchInMigrationMode registry value in order to process this mailbox. See the documentation for further details. For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp This mailbox has duplicate entries in the directory and cannot be processed. For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp Enterprise Vault could not enable a mailbox because either the Vault Store or Indexing Service were not specified. Ensure that both the Vault Store and Indexing Service are set on the Provisioning Group, the Exchange Server or the Enterprise Vault Server. Mailbox: %1 For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp Enterprise Vault cannot process this Exchange Server because none of the users on this server has been processed by the provisioning task. Do the following: 1. Ensure that provisioning groups have been defined. 2. Run the provisioning task. 3. Run mailbox synchronization/archiving again. Exchange Server: '%1' For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp This mailbox cannot be processed until the Exchange provisioning task has processed the corresponding user's details. Ensure that a provisioning group includes this user and run the provisioning task. To disable these warnings, set the 'HideMissingPolicyInfoErrors' registry value to 1. See the documentation for further details. Mailbox: %1 Message store: %2 For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp The mailbox does not have an entry in the Enterprise Vault database. For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp A new mailbox was found containing Enterprise Vault settings for an existing entry in the Enterprise Vault database. The mailbox has not been linked to the existing entry. Use the 'zap' command in Policy Manager to remove the old Enterprise Vault settings. Mailbox: %1 For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp The Exchange Server %1 is running Exchange Server version 5.5. This version of Exchange Server is not supported by Enterprise Vault. The task will shut down. For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp Failed to determine the provisioning group for the mailbox %2. This mailbox cannot be processed until the Exchange provisioning task has processed the corresponding user's details. Ensure that a provisioning group includes this user and then run the provisioning task. Error: %1 For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp A delay occurred whilst enabling archiving for the mailbox %1 Mailboxes cannot be enabled while the Storage Service state is 'Stopped' or 'Upgrading' or when it is in read-only mode. For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp Archiving target is disabled, processing request will be discarded. Task: %1 Target: %2 For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp This message could not be archived due to it having a conflicting Transaction Id. The conflicting Transaction Id has been removed from the message which will now allow it to be successfully archived on the next archiving run. Item MSMQ Label: %1 For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp The nEVDominoHousekeeping process is shutting down because it is not running under the Enterprise Vault Service Account. Restart the Enterprise Vault Domino Server using the Vault Service account. For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp This folder is being managed by Exchange 2007. Currently there is no EV integration with managed folders. For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp <p>e.g.</p> <p>There were too few archivable items available to take mailbox '/O=ACMEOU=ZKO/cn=Recipients/cn=Dowdp' below the quota-free level of 10%.</p> <div>&nbsp;&nbsp;Quota limit: 200000 KB &nbsp;&nbsp;Quota used: 339062 KB (169% of Quota limit) &nbsp;&nbsp;Required to archive: 158000 KB &nbsp;&nbsp;Actual amount archived: 167 KB</div> <div>&nbsp;You may need to review your mailbox archiving policies to allow more items to be archived if you regularly see this warning for mailboxes.</div>Failed to find configuration information for the %1 Agent in the Directory Service on computer %2 This could be because the Task was deleted before completing all its outstanding work. Task entry id: %3 Further instances of this error will be suppressed. For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp Public folder redirection has been detected. This configuration can adversely affect performance and reliability. This redirection could be either of the following: -The mailbox that is being used to connect to Exchange Server is being redirected to another Exchange Server. -The Public Folder store is not homed locally on the target Exchange Server Exchange Server: %1 Public Folder Task: %2 Redirected to Server: %3 For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp A manual archive operation was rejected since it did not match the users policy. For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp Can not process envelope body for journal archiving as it seems to have invalid content. For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp The following message could not be archived as it seems to have an invalid envelope body. Title: %1 Mailbox: %2 No further attempts will be made to archive this message. The message has been moved to the 'Enterprise Vault Journaling Service\Failed to Copy' folder. For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp The following message could not be archived by the Journaling Service as it seems to have an invalid envelope body. Title: %1 Mailbox: %2 An error occurred whilst moving the message to the 'Enterprise Vault Journaling Service\Failed to Copy' folder. The message has been marked as "Do Not Archive", and no further attempts will be made to archive this message. For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp Can not process envelope message as the attachment appears invalid. For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp The following envelope message could not be archived as the attached message does not appear valid. Title: %1 Mailbox: %2 No further attempts will be made to archive this message. The message has been moved to the 'Enterprise Vault Journaling Service\Failed to Copy' folder. For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp The following envelope message could not be archived as the attached message does not appear valid. Title: %1 Mailbox: %2 An error occurred whilst moving the message to the 'Enterprise Vault Journaling Service\Failed to Copy' folder. The message has been marked as "Do Not Archive", and no further attempts will be made to archive this message. For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp A network error has been reported by ConfigureMsgService. It may be due to a problem contacting a Global Catalogue Server. For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp (To disable these warnings, use the 'HideMovedItemUpdateFailure' registry value. See the documentation for details.) The following item has been moved in the mailbox but it could not be updated in the archive: Mailbox: %2 Folder: %3 Title: %4 Archive folder updated: %5 Retention Category updated: %6 Reason: %1 For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp There were too few archivable items available to take mailbox '%1' below the quota-free level of %2%. Quota limit: %3KB Quota used: %4KB (%5% of quota limit) Previously archived (pending): %8KB Required to archive: %6KB (adjusted %9KB) Amount archived (this run): %7KB You may need to review your mailbox archiving policies to allow more items to be archived if you regularly see this warning for mailboxes. For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp Could not determine message type. For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp Attempt to process Deleted Items folder when ArchiveDeletedItems is OFF. For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp Failed to check a shortcut titled: %1 for expiry, due to missing MAPI attribute: %2 Folder: %3 Mailbox: %4 For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp A shortcut has been deleted because some properties were missing and they could not be repaired. Shortcut: %1 Mailbox: %2 For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp (To disable these warnings, use the 'HideMovedItemUpdateFailure' registry value. See the documentation for details.) The following item has been copied in the mailbox but it could not be updated in the archive: Mailbox: %2 Folder: %3 Title: %4 Reason: %1 For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp The following message could not be archived by the Journal Task as it may be corrupt. Title: %1 Task: %2 Mailbox: %3 Number of corrupt Journal mailbox messages currently identified: %4 The message cannot be moved to the 'Enterprise Vault Journaling Service\Invalid Journal Report' folder and also cannot be marked as "Do Not Archive". For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp Could not get the Message Store entry id to update shortcuts. %Mailbox: 1% %Error: %2 For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp CArchivingAgent::ProcessShortcutUpdate() Mailbox does not exist. The mailbox may have been deleted. Mailbox: %1 Error: %2 For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp CArchivingAgent::ProcessShortcutUpdate() Could not open mailbox to update shortcuts. The shortcut update will be tried again. Mailbox: %1 Error: MAPI_E_NETWORK_ERROR For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp

CArchivingAgent::ProcessShortcutUpdate() Could not open mailbox. Mailbox: %1 Error: Unspecified error For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp Failed to scan mailbox. Could not find any folders in the mailbox. Mailbox: %1 Error: %2 For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp Could not open mailbox. Shortcut processing aborted. See the move archive log for details. Task: %2 Mailbox: %1 Error: %3 For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp Could not retrieve the ArchiveFolderID values. The archive might have been deleted. Shortcut processing aborted. Mailbox: %1 ArchiveID: %2 For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp The shortcut update task could not log on to the Exchange server. Ensure that the mailbox is not hidden, that the server is running and that the Vault Service account has sufficient permissions on the server. Exchange Server: %1 Mailbox: %2 Error: %3 For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp Failed to scan mailbox. Unable to enumerate a subfolder. See the move archive log for details. Mailbox: %1 Folder: %2 For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp Could not retrieve folder property values for shortcut update. See the move archive log for details. Mailbox: %1 Folder: %2 Property: %3 Error: %4 For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp Failed to update the state of move archive shortcut update subtask. Shortcut processing aborted. Mailbox: %1 Error: %2 For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp Failed to initialize or update the subtask checkpoint. Shortcut processing aborted. Mailbox: %1 Error: %2 For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp Failed to post the shortcut update message to the MSMQ queue. Run the archiving task again to start shortcut update. Mailbox: %1 Error: %2 For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp The mailbox is locked by another operation. The move archive shortcut update request will be reposted to the end of the MSMQ queue. Mailbox: %1 For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp Could not open a folder of mailbox. Shortcut processing aborted. Mailbox: %1 Folder: %2 Error: %3 For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp Could not update shortcut. The archiving task cannot process one or more shortcuts to items that have been migrated from Domino. The RestoreShortcutBody registry value is set. This registry value makes the archiving task rebuild Enterprise Vault shortcuts for Exchange Server messages and shortcuts to items that have been migrated from Domino. The archiving task cannot initialize the Lotus Notes runtime in order to process items that have been migrated from Domino. Check that Lotus Notes is correctly installed on the server that is running the archiving task. Exchange Server shortcuts can be processed correctly. For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp Cannot process the mailbox until it has been re-provisioned. The following user object was not found in Active Directory, it may be that the user object has been moved or deleted. AD Object: %1 Legacy DN: %2 For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp

Invalid Input XML format For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp

Mailbox Registration Failed For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp An invalid retention category has been specified for items with dates in the future. Policy name: %1 Retention category: %2 For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp The author or recipient information is not available. It was not possible to process the message. Task: %1 Message Title: %2 Mailbox DN: %3 For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp The task failed to log on to the Exchange Server. The task is running as a Windows user that is a member of the 'domain admins' group. Remove the user from this group to ensure that the task has sufficient access to the Exchange Server. Task: %1 Exchange Server: %2 Windows user: %3 For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp

Example:<p> Enterprise Vault Indexing Service Service startup is delayed pending service synchronization <p> The service depends on one or more Enterprise Vault services and is waiting until they are all fully operational. Service startup will fail if service synchronization takes longer than 30 minutes. Note that the Services Control Panel dialog box will show this service as running even though it is not fully operational <p> The most likely cause of the delay is that the Directory service is not running Example:<p> Enterprise Vault Indexing Service Service startup is continuing following completion of service synchronization <p> The service depends on one or more Enterprise Vault services and had to wait for those services to become fully operational %1 Startup is being canceled due to failure of service synchronization The service depends on one or more Enterprise Vault services that have not become fully operational during the service synchronization period The most likely cause of the failure is that the Directory service is not running <br>e.g.<br> Enterprise Vault Public Folder Service - ACME IT is being canceled due to failure of service synchronization The service depends on one or more Enterprise Vault services that have not become fully operational during the service synchronization period. <br> The most likely cause of the failure is that the Directory service is not running%1 Service stopped during service synchronization The service depends on one or more Enterprise Vault services and was requested to stop whilst waiting for those services to become fully operational.

Service: %2 Failed to determine the current status of the Directory Service Reason: %1 The service is trying to synchronize with the site Directory Service but has encountered an error Internal Reference: [%3] Service: %2 Failed to determine the current status of the Indexing Service(s) Reason: %1 The service is trying to synchronize with the Indexing Service(s) but has encountered an error Internal Reference: [%3] Service: %2 Failed to complete service synchronization Reason: %1 The service is trying to synchronize with other Enterprise Vault services but has encountered an unrecoverable error Internal Reference: [%3]

The Admin Service has successfully completed its preliminary checks and has started (%1) <br>For example:<br> The Admin Service has successfully completed its preliminary checks and has started (5.0.0.5562)

Failed to grant the %1 user rights to the Vault Site Account %2. It may be possible to add this user right manually. Make sure that the Vault Site Account has the "Act as part of the operating system" and "Log on as a service" advanced user rights on the computer %3. Please use the User Manager for Domains utility to do this.

The Vault Site Account, %1, is not a member of the local Administrators group on computer %2 Please use the User Manager for Domains utility to add the Vault Site Account to this group.

The Admin Service has not performed any preliminary checks. To perform these important checks on startup please delete the following registry key:%1

Failed to configure the Admin Service due to a problem with the Service Control Manager. Subsequent attempts will be made each time the Admin Service is started up. Failed to make the Enterprise Vault service, %1 dependent on the Admin Service. Subsequent attempts will be made each time the Admin Service is started up.

Failed to make the necessary checks due to a problem with the Service Control Manager. Subsequent attempts will be made each time the Admin Service is started up.

The Vault service %1 is configured to run under the Local System account. It should be configured to run under the Vault Service Account.

%1 Unable to synchronize with an Enterprise Vault Service. The service is not present in the target computer's NT Services configuration. The Enterprise Vault site may not be fully configured, or the service may have been deleted from the NT Services configuration. Computer: %2 Service database name: %3 Configuration of the Enterprise Vault site should be completed prior to starting this Enterprise Vault service. %1 Unable to synchronize with the Enterprise Vault Indexing Service. There are no Indexing Services configured in the Enterprise Vault site. The Enterprise Vault site may not be fully configured, or the Indexing Services may have been deleted Configuration of the Enterprise Vault site should be completed prior to starting this Enterprise Vault service

Insufficient Virtual Memory is available for the Enterprise Vault to run Enterprise Vault will now be shutdown; to correct this problem, free memory by closing any unwanted applications and restart Enterprise Vault Insufficient diskspace is available on drive {drive} for the Enterprise Vault to run Enterprise Vault will now be shutdown; to correct this problem, delete any unwanted files and restart Enterprise Vault Insufficient diskspace is available for the Enterprise Vault to run Enterprise Vault will now be shutdown; to correct this problem, delete any unwanted files and restart Enterprise Vault Insufficient Diskspace is available on drives %1 and %2 for the Enterprise Vault to run Enterprise Vault will now be shutdown; to correct this problem, delete any unwanted files and restart Enterprise Vault The system is running out of Virtual Memory - free memory by closing any unwanted applications Enterprise Vault will be shutdown when %1% of Virtual Memory is used The system is running out of diskspace on drive %1 - delete any unwanted files Enterprise Vault will be shutdown when %2% of the diskspace is used <br>For example:<br> The system is running out of diskspace on drive G: - delete any unwanted files Enterprise Vault will be shutdown when 99% of the diskspace is used The system is running out of diskspace - delete any unwanted files Enterprise Vault will be shutdown when %1% of the diskspace is used The system is running out of diskspace on drives %1 and %2 - delete any unwanted files Enterprise Vault will be shutdown when %3% of the diskspace is used

The %1 service failed to respond to the STOP request in a timely manner. This may be due to the service getting insufficient CPU time; check subsequent event log entries for a "successfully stopped" message. If the service is still running, manually stop the service and check the event log for any errors logged by the service. <br>e.g.<br> The Enterprise Vault Archiving Service for ACMEEXCH1 service failed to respond to the STOP request in a timely manner. This may be due to the service getting insufficient CPU time; check subsequent event log entries for a "successfully stopped" message. If the service is still running, manually stop the service and check the event log for any errors logged by the service.

Message: %1 The Enable Mailbox wizard has failed to start Lots more interesting stuff *** Facility: %2 Internal Reference: [%3]

Message: %1 License checking has identified that there is no local Admin Service. Full license checking has not been performed. Facility: %2 Internal Reference: [%3]

Your license has expired Enterprise Vault will continue, but with reduced functionality To restore Enterprise Vault to full functionality, please contact your license supplier to obtain a new license Your license file is invalid (contents corrupt) If the license file was created manually, please double check that the license details were entered correctly and not mis-typed. Otherwise, replace the license file with the one supplied to you, (for example from a backup) Enterprise Vault will continue, but with reduced functionality Your license file is not valid for this system (wrong HOSTID) Your license file is locked to a particular system, and is only valid on that system. If the license file was created manually, please double check that the license details are for this system. Otherwise, replace the license file with the one supplied to you for this system Enterprise Vault will continue, but with reduced functionality Please contact your license supplier to obtain a valid license An unhandled exception has been raised. Command Line: %1 Process Id: %2 Thread Id: %3 Exception Id: %4 Instruction Address: %5 Stack Trace: %6 Stack Trace(basic): %7 Registers: %8 An exception is raised when a process encounters an unexpected fault. Contact your support representative with details of this and any preceding errors. An unhandled access violation has occurred. <p> Command Line: "C:\Program Files\Enterprise Vault\{server executable}" <br> Process Id: %2<br> Thread Id: %3<br> Exception Id: %4<br> Instruction Address: %5<br> Memory Access Type: %6<br> Memory Address: %7<br> Stack Trace: %8 Stack Trace(basic): %9 Registers: %10 <p> The process has attempted to access a protected memory address. Contact your support representative with details of this and any preceding errors. An exception has been raised. Internal reference %1 %2 An exception is raised when a process encounters an unexpected fault. Contact your support representative with details of this and any preceding errors. <BR>e.g.<br> An exception has been raised. <br> Internal reference Filter.cpp (CFilter::FinalConstruct) [lines {27,31}] built Jun 17 15:39:02 2004 <br> An exception is raised when a process encounters an unexpected fault. Contact your support representative with details of this and any preceding errors.

An exception has occurred in the Memory Mapped Stream object Name: %2 Type: %3 Reference: %4 Reason: %1 <br>e.g.<br> An exception has occurred in the Memory Mapped Stream object <br> Name: C$6$SRC<br> Type: e <br> Reference: "R" <br> Reason: Catastrophic failure [0x8000ffff] <br>

A C Runtime debug report has been raised. Report Type: %1 Report: %2 Process Id: %3 Command Line: %4 NOTE: The process may be hung awaiting user response to a Windows message box. If the process is not running under the same user account as the current desktop then the message box may not be visible. In this situation it may be possible to investigate the error that generated the debug report by attaching a debugger to the process.

There have been more than %1 Errors in the last %2 seconds, of which %3% or more are from Enterprise Vault. Enterprise Vault will now shut down. <br>For example:<br> There have been more than 10000 Errors in the last 7200 seconds, of which 90% or more are from Enterprise Vault. Enterprise Vault will now shut down. Vault Store: %1 No Partition for this Vault Store. Archiving to this Vault Store is not possible until Partition created. Facility: %2 Internal Reference: [%3]<br>e.g.<br> Vault Store: CenteraStore No Partition for this Vault Store. Archiving to this Vault Store is not possible until Partition created. Facility: Vault Administration Console Internal Reference: [VAC/NVS1]

An error occurred on the first attempt to read a performance counter: Object: %1 Counter: %2 Instance: %3 Handle: %4 Error: %5. An error occurred while attempting to read a value from a performance counter: Object: %1 Counter: %2 Instance: %3 Handle: %4 Error: %5. <br> e.g.<br> An error occurred while attempting to read a value from a performance counter: <br> Object: Memory <br> Counter: % Committed Bytes In Use <br> Instance: Handle: 0x00000000<br> Error: 0xC0000BBC. <br>

An error occurred in the thread control the Enterprise Vault .NET server processes Error: %1 Reference: %2 Additional Info: %3 %4 The Enterprise Vault .NET server processes can be restarted by pausing and resuming the Enterprise Vault Admin Service.

The system is running out of diskspace on drive %1 - delete any unwanted files Enterprise Vault will be shutdown when less than %2 Mb of diskspace remains For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp The system is running out of diskspace - delete any unwanted files Enterprise Vault will be shutdown when less than %1 Mb of diskspace remains For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp The system is running out of diskspace on drives %1 and %2 - delete any unwanted files Enterprise Vault will be shutdown when less than %3 Mb of diskspace remains For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp The account that the task '%1' is running under is not a member of the local Administrators group on this computer. For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp The account that the Task is running under is not a member of the local Administrators group on this computer. For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp Enterprise Vault Event Log is full. Events will be written into the Application Event Log until space is available in the Enterprise Vault Event Log. For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp Enterprise Vault Converters Event Log is full. Events will be written into the Application Event Log until space is available in the Enterprise Vault Converters Event Log. For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp A locking error has occurred Reason: %1 Internal reference: %2 Info: %3 %4 For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp The register of items is full and has been purged to make space. Register: %1 This may result in items that cannot be processed due to repeated errors taking several more attempts before processing is abandoned. For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp Due to an internal error the facility to limit attempts to abandon items that cause repeated failures has been disabled. Reason: %1 Register: %2 Reference: %3 This may result in items that cannot be processed due to repeated errors blocking processing of other items. For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp The Enterprise Vault services cannot start because an error has occurred writing a required setting to the registry. Reason: %1 For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp Machine and application permissions have been added for ANONYMOUS LOGON group. See Help for more information. For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp Could not obtain the service entry identifier for this service Service name: %2 Error: %1 Internal reference: %3 For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp Could not update the service entry identifier parameter for this service Service name: %2 Error: %1 Internal reference: %3 For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp The process has been terminated because of a buffer overflow. Command Line: %1 Process Id: %2 Thread Id: %3 Stack Trace: %4 Stack Trace (basic): %5 For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp Enterprise Vault is configured in a cluster. You must use the cluster software to bring the service online. The service cannot be started using the Windows Service Control Manager. The service will now stop. For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp License checking has identified that you are currently licensed for the following features: %1 For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp License checking has identified that you currently do not have any licensed features. Please contact your license supplier to obtain a new license. For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.aspUser '%1' attempted to use methods which require administrator privileges. For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp Access denied. User is not in a role that allows '%2'. User: '%1' For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp Required license not installed. An Enterprise Vault license is required for the following feature but the license is not installed: Feature: %1 Feature Code: %2 %3 See the 'Installing and Configuring' manual for information about licenses. For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp

Required license not active. An Enterprise Vault license is required for the following feature but the installed license is not currently active: Feature: %1 Feature Code: %2 %3 See the 'Installing and Configuring' manual for information about licenses. For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.aspFailed to install license file. License file path: %1 Reason: %2 For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp Failed to handle delay loading of EVRT.dll (Review and correct list of EVRT.dll routines in the EVRTProxy namespace in EVStgAPI.cpp) For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp Failed to look up the anonymous user account. Account: %1 Reason: %2 For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp The anonymous user account is not valid Account: %1 Account Type: %2 For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp Authentication is currently being delayed due to a suspected brute-force attack. Number of failures: %1 Delay period remaining: %2 (mins:secs) During this period users will experience short delays when searching or accessing archived items. For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp Authentication request failed. Reason: %1 Caller: %2 Token: %3 Failure Count: %4 For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp Enterprise Vault could not initialize the Lotus Notes runtime. Ensure that the Notes client is installed on this computer and restart the Admin Service. For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp An unsupported version of Microsoft Outlook is installed on this server. All services and tasks will continue to run but you may experience issues during archiving and retrieving of Exchange Server items. Installed Outlook version: %1 Refer to the compatibility charts for supported versions. http://entsupport.symantec.com/docs/276547 For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp Vault Store Group: %1 There are no Vault Stores in this Vault Store Group. Archiving to this Vault Store Group will not be possible until a Vault Store is created. Facility: %2 Internal Reference: [%3] For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp An error occurred in thread pool used for processing requests. Further error information: %1 Internal reference: %2 For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp Request thread pool (InstanceId = [%1]) started with maximum thread count = [%2]. For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp Request thread pool (InstanceId = [%1]) stopped. Total threads stopped = [%2]. For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp Attempted to stop all active requests in the thread pool (InstanceId = [%1]). Total active requests attempted to be stopped = [%2]. Total pending requests removed from the thread pool = [%3]. For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp Thread pool (InstanceId = [%1]) could not create all the requested [%2] threads. Total threads created = [%3]. For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp Thread pool (InstanceId = [%1]) can not support requested [%2] threads. Maximum [%3] threads are allowed. Thread pool will not be created. For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp Thread pool (InstanceId = [%1]) could not stop [%2] requests. Total requests attempted to be stopped = [%3]. For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp Thread pool (InstanceId = [%1]) could not stop a request (cookie = [%2]) after maximum wait time. For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp Failed to change the Vault Service account details on computer %1. For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp Failed to change the Vault Service account details for service %1 on computer %2. For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp Failed to open the Service Control Manager on computer %1. For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp Thread pool (InstanceId = [%1]) could not read the top request object (cookie = [%2]) from the pending requests queue. For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp Microsoft Outlook is installed but is not the default mail client. Configure Microsoft Outlook to be the default mail client. See the requirements for Exchange Server archiving in 'Installing and Configuring'. For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp

Failed to create file Name: %1 Error: %2 <br>e.g.<br> Failed to create file Name: C:\Shopping\ACMEDOM\DOWDEP\20040707151820580.bsk Error: 0x80030003

Deleted the following basket: %tShopper: %1\%2 %tBasketID: %3 <br>e.g.<br> Deleted the following basket:<br> Shopper: acme\dowdp <br> BasketID: 20040705143853367<br>Failed to delete the following Basket: %tShopper: %1\%2 %tBasketID: %3 <p>e.g.<br> Failed to delete the following Basket:<br> Shopper: ACME\dowdp<br> BasketID: 20040220184004191<br>

Failed to update the restoration status of an item in a basket, due to it being locked. This can sometimes happen when restoring large baskets and does not cause any harm. The Retrieval Agent will keep trying until the basket becomes unlocked.

The Retrieval Service on computer %1 is not running. The Shopping Service cannot restore any baskets until the Retrieval Service is running. A COM exception occurred while verifying a mailbox's distinguished name. %tSource: %1 %tDescription: %2 This could be the result of undetected problems occurring when CDO.DLL was installed. <br>e.g.<br> A COM exception occurred while verifying a mailbox's distinguished name.<br> Source: Collaboration Data Objects<BR> Description: [Collaboration Data Objects - [MAPI_E_UNCONFIGURED(8004011C)]]A general exception occurred while verifying a mailbox's distinguished name. This could be the result of undetected problems occurring when CDO.DLL was installed.

Failed to retrieve the thread data passed when creating the worker thread. The worker thread will terminate and the shopping basket will not be restored %tWorker Thread: %1

This Enterprise Vault server is running in a building blocks environment and is hosting another Enterprise Vault server. The Shopping Service data file locations for the following Enterprise Vault servers do not match: %2: %3 %4: %5 Please set these locations to be the same and restart the Shopping Service. For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp The Shopping Service cannot perform the requested MAPI dependent operation because the required version of MAPI is missing or incorrectly configured on the Enterprise Vault server: To resolve the problem: 1. Stop all Enterprise Vault services and processes that are using MAPI. 2. Ensure that a version of MAPI supplied with Microsoft Outlook 2003 or later is installed and correctly configured on the Enterprise Vault server. 3. Restart the Enterprise Vault services. If the problem persists, see the "Troubleshooting" section of the Enterprise Vault Administration help file for guidelines on how to proceed. For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp

An attempt was made to open a copy of a Saveset in Create or Write mode Services using copies of Savesets must treat them as read-only items. An attempt was made to access the root storage interface of the copy of a Saveset Services using copies of Savesets must be treat them as read-only items. An attempt was made to set an attribute of the copy of a Saveset Services using copies of Savesets must be treat them as read-only items.

The size of the message buffer used for MSMQ message bodies has been automatically increased due to a detected mismatch in expected body size. No action is necessary

Error creating saveset object %1 <br>e.g.<br> Error creating saveset object<br> Not enough storage is available to complete this operation. [0x8007000e]

Error opening saveset file Reason: %1 File: %2 <br>e.g.<br> Error opening saveset file <br> Reason: A device attached to the system is not functioning. [0x8007001f] <br> File: G:\Enterprise Vault Stores\ACMESTORE1\2002\09\05\11\321564000000000~200209051146190000~0.DVS

Error mapping view of saveset file %1 <br>e.g.<br> Error mapping view of saveset file Not enough storage is available to process this command. [0x8]

Error opening storage on lockbytes memory %1 <br>e.g.<br> Error opening storage on lockbytes memory already exists. [0x80030050]

Error creating docfile for saveset %1 <br>e.g.<br> Error creating docfile for saveset Not enough storage is available to process this command. [0x80070008]

An error occurred processing message notification. Either a zero-byte message was found on the queue, or a problem exists with the queue preventing message retrieval from occurring correctly

Error occurred when creating a cursor %1 <br>e.g.<br> Error occurred when creating a cursor There are insufficient resources to perform the operation. [0xc00e0027]

Could not read the number of processes and threads from the Directory for Storage Service Entry %1. Using default values of 1 process and 1 thread per server component.

Failed to open the IArchivingAgentUpdate interface to the Enterprise Vault ExchangeArchivingAgent Class COM component Reason: %1 Failed to open the IExchangeShortcutAccessor interface to the Enterprise Vault ExchangeShortcutAccessor Class COM component Reason: %1

Error inserting Saveset file into Vault Store volume. Reason: %1 <p>e.g.<br> Error inserting Saveset file into Vault Store volume. Reason: There is not enough space on the disk. [0x80070070]

Failed to inform the %2 Service of successful storage of a Saveset in a Vault Store. Reason: %1 <br>e.g.<br> Failed to inform the Agent (18C4A4BCB9D6B324A96D897BF9B031E5A1110000XXXXXX.XXXX.XXX) Service of successful storage of a Saveset in a Vault Store. Reason: Failed to calculate the service entry table, unrecognized service entryID [0xc0040901]

Error Could not obtain the status of a saveset %1 <br>e.g.<br> Error Could not obtain the status of a saveset<br> Access is denied. [0x80070005] Error Could not delete a saveset %1 <br>e.g.<br> Error Could not delete a saveset 187400000000000~200405062357510000~0~68917449E082498B9F6AE2905911952

e.g.<br> Unable to fetch item from "vault.acme.com", if an HSM is being used check that it is running <br> Access denied [0xc0041801] <br> Saveset Id: 311041000000000~200212042221590000~0~66AD4FB4129B4F36BA16D58406169F3 <br> Vault Id: 15DE4123YA375D511838800508B319C691110000vault.acme.com <br> Reference: [GOS]

Size of MessageSetInfo buffer does not match size of CORRELATION_ID or MSG_ID properties This indicates a software development error.

Error reading Vault Status entry in Vault Directory %1 <br>e.g.<br> Error reading Vault Status entry in Vault Directory<br> The RPC server is unavailable. [0x800706ba]No entry for Vault in Vault Directory<br> Vault Id:<br> 1BD1B1AF49AD8D311ACEE00508B070AE51110000huyton.zko.dec.com <br> An attempt was made to read information for a Vault that does not have an entry in the Directory. This may indicate an inconsistency in the Vault Directory

Error reading the Storage Service Entry %2 from the Vault Directory %1 <br>e.g.<br> Error reading the Storage Service Entry 1F9412SA111CA3A4184E92EF5C1EBFE9C1e10000vault.acme.com from the Vault Directory Access is denied [0x80070005]

Error from StorageRestore: Error reading SavesetInformation SavesetID: %1 VaultID: %2 VaultStoreID: %3 <br>e.g.<br> Error from StorageRestore:<br> Error reading SavesetInformation<br> SavesetID: 111000000000000~200301230334000000~0~7E05C9441C664C7C97DB41695CB764F<br> VaultID: 1F701BDD1B125EF4AA74A0BD18CA0D46D1110000acme.com<br> VaultStoreID: 196667B5FEBDAD3119CAB00508B070AE51210000acme.comError from StorageRestore: Error removing storage objects after reading SavesetInformation SavesetID: %1 VaultID: %2 VaultStoreID: %3 Error from StorageRestore: Saveset entry not found in SavesetInformation table SavesetID: %1 VaultID: %2 VaultStoreID: %3 <br>e.g.<br> Error from StorageRestore:<br> Saveset entry not found in SavesetInformation table<Br> SavesetID: 412313000000000~200303230956500000~0~896076EB73A6418FBA64A62196F604B<br> VaultID: 541954128021F7346AC667DAFB5D4A08B1110000vault.acme.com<br> VaultStoreID: 192696B383B8AD4119CE200508B070AE51210000vault.acme.com <br>

Error opening MSMQ Dead Letter Queue - Access is denied for queue %1 Using MSMQ Explorer, edit the permissions of the Computer on which the queue resides. Ensure that the local Administrators group has "Full Control" access. The computer properties to modify will be those of the system on which this error is logged. This can be verified by checking that the ID of the computer (displayed within the General tab of the Computer properties) corresponds with the queue name within this message.

MSMQ negative acknowledgment message(s) have been handled. Queue:%1 Reason: Destination queue can not be reached, the queue may have been deleted MSMQ negative acknowledgment message(s) have been handled. Queue:%1 Reason: The message was purged before reaching the destination queue MSMQ negative acknowledgment message(s) have been handled. Queue:%1 Reason: Time to reach queue has expired <br>e.g.<br> MSMQ negative acknowledgment message(s) have been handled. Queue:.\private$\Enterprise Vault Restore Spool Admin Queue Reason: Time to reach queue has expired

MSMQ negative acknowledgment message(s) have been handled. Queue:%1 Reason: The sender does not have send access rights on the queue. <br>e.g.<br> MSMQ negative acknowledgment message(s) have been handled. Queue:.\private$\Enterprise Vault Archive Agent Admin Queue Reason: The sender does not have send access rights on the queue.

MSMQ negative acknowledgment message(s) have been handled. Queue:%1 Reason: The message signature is bad. The message could not be authenticated.

MSMQ negative acknowledgment message(s) have been handled. Queue:%1 Reason: The message could not be encrypted for the destination. MSMQ negative acknowledgment message(s) have been handled. Queue:%1 Reason: The message was sent to a non-transactional queue within a transaction. MSMQ negative acknowledgment message(s) have been handled. Queue:%1 Reason: The message was sent to a transactional queue not within a transaction. MSMQ negative acknowledgment message(s) have been handled. Queue:%1 Reason: The queue was deleted, after the message has arrived MSMQ negative acknowledgment message(s) have been handled. Queue:%1 Reason: The message was purged at the destination queue <p>MSMQ negative acknowledgment message(s) have been handled. Queue:%1 Reason: Time to receive has expired, while the message is in the queue </p> <p>e.g.MSMQ negative acknowledgment message(s) have been handled.<br />Queue:.\private$\Enterprise Vault Restore Spool Admin Queue<br />Reason: Time to receive has expired, while the message is in the queue<br /></p>

Failed to initialize access to the Storage database. Reason: %1 This may be due to one of: - Failure to initialize MAPI - Failure to open the IPersistentStorageContext interface to the PersistentStorageContext Class COM component - Failure to open the IStorageDBObject interface to the StorageDBObject Class COM component

Error processing saveset %1 <br>e.g.<br> Error processing saveset E:\Enterprise Vault_Store\2003\03\21\11\311000000000000~200307261348120000~0.DVS

Error getting directory handle Reason: %1 Directory: %2 <br>e.g.<br> Error getting directory handle <br> Reason: The system cannot find the file specified. [0x80070002] <br> Directory: H:\Enterprise Vault Stores\Public Folders

Error returned from ReadDirectoryChangesW in wait thread for partition "KVS Part1"<p> A possible cause is that the partition is on a network drive <p> FileWatch will continue but there may be a delay in removing safety copies from mailboxes after the Vault Store has been backed up.

Client request refused due to insufficient privileges, user ACME\dowdp attempted to access the Vault with the VaultID 1BFE4E89DA0E20D4CB94E93982AFFCF921110000vault.acme.com but did not have DV_DS_PERM_READ accessAn unexpected timeout occurred while attempting to access a queued message. This may have occurred because a message was not on a queue as expected or because the system is heavily loaded, thus causing excessive MSMQ delays. If you suspect the problem is caused by MSMQ delays, try increasing the Enterprise Vault "QueueTimeout" registry value, as described in the "Modifying Registry Settings" section in the Troubleshooting section of the Administrator help. The value specified for "QueueTimeout" in the registry exceeds the maximum allowed value of %1 seconds. The timeout value in use has been reduced to this maximum.

The value specified for "NackHandlerClearListInterval" in the registry exceeds the maximum allowed value of %1 seconds. The interval value in use has been reduced to this maximum. An incomplete saveset was removed from a queue. It is likely that there are some MSMQ problems that prevented messages being successfully placed on the queue. Check event log for additional errors The queue %1 is already open. It is likely that another process is running and will be processing the Nack messages placed on this queue. This Nack Handler will now terminate, as it is redundant. No additional action is necessary.

The StorageFileWatch process for Storage Service %1 is exiting because there are no eligible Vault Stores. Vault Stores are ineligible if: - Remove safety copies from mailbox is 'Never' - Status is not 'Available' - Schema version is not supported

Example<br> Starting update of Vault Index with Storage transactions from 1 to 1419 <p> Vault: Elwood P. Dowd <br> Vault Id: <br> 1443908890DE8CB4EBA827EEAC6A448281110000huyton.zko.acme.com <br> Vault Store: Support FSA <br> Vault Store Id: <br> 1477079532F2AD1469D0738D09C78B4E81210000huyton.zko.acme.com <p> NOTE: Index additions will use the common index elements currently stored in the archived item.

Example<br> Completed update of Vault Index with Storage transactions 13420 to 13450 <p> Vault: Elwood Dowd<br> Vault Id: 1331838A6A86ECD489B8B202FF17B65801110000acme.com<br> Vault Store: ZKO <br> Vault Store Id: 14962C1A68D4E4411838400508B319C691210000acme.com <br> Elapsed Time: 0:0:10 (hours:minutes:seconds)<br> Number of index additions replayed: 30<br> Number of index deletions replayed: 0<br>

Error accessing Vault Store. [Internal reference %1] <br> e.g. Error accessing Vault Store. [Internal reference OVS/svs] [VaultId = 12DA6123AS1C876488CE44CD74FBC0FF11110000vault.acme.com] Error accessing a Saveset file Reason: %1 Saveset Id: %2 Vault: %3 Vault Id: %4 Reference: %5 <br>e.g.<br> Error accessing a Saveset file Reason: EMC Centera C-Clip contains incorrect Saveset Pool Address: ClipId: Expected: VaultStoreId: VaultId: SavesetId: Received: VaultStoreId: VaultId: SavesetId: [0xc0041a6b] Saveset Id: 441441000000000~200402050749290000~0~3E07C297FC0E4ACB961D6F17D06FB30 Vault: Dowd Elwood Vault Id: 125RE7T5K395ED94FAC9B99FDA89A0AB41110000ACMEVAULT.COM Reference: VSOP Error updating an index. [Internal reference %1] <br>e.g.<br> Error updating an index.<br> [Internal reference GISN]<br> [VaultId = 5RDSA4KR70B16C74594C5AC9AEEBF1EB11110000ES2ACME.COM] %3

The index for a Vault needs to be re-constructed. %1 missing additions or deletions on the index were detected. The current archiving operation has been abandoned. Lost index operations have been detected. The loss has been ignored, and is assumed to be the result of restoring an old database from backup. %1 missing index operations were detected. [Internal reference %3] <br>e.g.<br> Lost index operations have been detected.<br> The loss has been ignored, and is assumed to be the result of restoring an old database from backup.<br> 162 missing index operations were detected.<br> [VaultId = 23T65YH431F653841B1401266A4093F861110000acmevault]<br> [Internal reference CCUAU]

A failure occurred attempting to delete completed JournalArchive records from a Vault Store database. Indexing Service Sequence number = %2 Vault Id = %3 Vault Store = %4 No action is necessary. The records will remain in the database until the next attempt to delete completed JournalArchive records. A failure occurred attempting to update JournalArchive records in a Vault Store database. Indexing Service Sequence number = %2 Vault Id = %3 Vault Store = %4 No action is necessary. The records will remain in the database until the next attempt to update JournalArchive records. A failure occurred attempting to delete completed JournalDelete records from a Vault Store database. Indexing Service Sequence number = %2 Vault Id = %3 Vault Store = %4 No action is necessary. The records will remain in the database until the next attempt to delete completed JournalDelete records.

Error from document conversion: Vault ID: %2 %3 %1 <br>e.g.<br> Error from document conversion: Vault ID: 125123243D2C94D4A9B8920E51C1019501110000acme.com Saveset Message for Mailbox /O=ACME/OU=ZKO/CN=RECIPIENTS/CN=DOWDEP, Message titled: Rabbits The parameter is incorrect. [0x80070057]

Failed to find a Saveset entry in the Vault database [Vault Id: %1] [Saveset Id: %2] This may be an attempt to delete an archived item that has already been deleted or it may indicate a problem with the Vault database. A request was made to delete an archived item whilst the containing Vault was being re-indexed [Vault Id: %1] [Saveset Id: %2] The contents of a Vault cannot be updated whilst it is being re-indexed Invalid Saveset file. Error: %1 File: %2 If an HSM is being used check that it is running. <br>e.g.<br> Invalid Saveset file. <br> Error: Saveset decompression failed. Error: Context: [0xc0041aa7] <br> File: E:\Enterprise Vault Stores\IT\2004\02\10\10\341200000000000~200402101018030000~0.DVS <br> If an HSM is being used check that it is running. An exception has occurred. A StorageArchive SavesetReceive thread has aborted: %1 [Internal reference %2] <br>e.g.<br> An exception has occurred. <br> A StorageArchive SavesetReceive thread has aborted: Unspecified error [0x80004005] [Internal reference SARE]

An exception has occurred. A StorageFileWatch thread has aborted: %1 [Internal reference %2] <br>e.g.<br> An exception has occurred. A StorageFileWatch thread has aborted: Unspecified error [0x80004005] [Internal reference FWSE]

Archive operation canceled because Saveset file is missing. [Vault Store: %1] [Vault ID: %2] [Saveset Filename: %3] [Transaction ID: %4] <br>e.g.<br> Archive operation canceled because Saveset file is missing.<br> [Vault Store: First Partition] <br> [Vault ID: 43T6Y5DEEB3CC0408395AABB97A970611110000ACMEVAULT]<br> [Saveset Filename: E:\Enterprise Vault Stores\ZKO\2003\04\18\00\313000000000000~200304180015030000~0.DVS] <br> [Transaction ID: 5921E4E294894B97BA52B4B70DB2266] Error deleting WatchFile database record for missing Saveset file [Partition: %1] [Vault ID: %2] [Saveset Filename: %3] [Transaction ID: %4]

Storage Restore was unable to recall or access file: %2 %1 <br>e.g.<br> Storage Restore was unable to recall or access file: F:\Enterprise Vault Stores\ACMESTORE1\2002\11\05\13\412310000000000~200211051300410000~0.DVS A device attached to the system is not functioning. [0x8007001f]

Failure waiting for system resource [Internal Reference %2] Reason:%1 Contact your support representative <br>e.g.<br> Failure waiting for system resource<br> [Internal Reference FWW] <br> Reason:The operation completed successfully. [0] <br> Contact your support representative Saveset file unavailable. Saveset Id: %1 Vault: %2 Vault Id: %3 <p>e.g.<br> Saveset file unavailable.<br> Saveset Id: 930000000000000~200303112451060000~0~31A94F30354D4EEDB886E577DDEFBD4 <br> Vault: Elwood P Dowd <br> Vault Id: 1F9C2C53C39777349B20EEFF4387D6BC11110000acme.com <br>Failed to open Queue: %2 Queue FormatName: %3 %1<br>e.g.<br> Failed to open Queue: Enterprise Vault Storage Archive Queue Queue FormatName: PRIVATE=91b6a6e2-5d35-4834-8917-e7d986e0fc29\00000010 Unable to establish a connection with Active Directory. Verify there are sufficient permissions to perform this operation. [0xc00e0013] Index reconstruction abandoned. Error accessing Microsoft Message Queue. [Queue Format Name = %2] [Internal reference %3] %4

e.g.<br> Unable to monitor the status of MSMQ queue <br> Reason: Access is denied. [0x80070005] <br> Queue: {Servername}\Private$\Enterprise Vault Storage Archive

The Storage Service is shutting down due to a persistent error in one of the service's components. Component: %1 Check previous entries in the error log and restart the storage service after the problem has been identified and corrected Item content will not be indexed. Message Id: %1 Label: %2 Previous attempts to archive the item have failed or been interrupted. This item will be archived without a preview being available to the web application and the content will not be indexed. It is not possible to search on the content but the item can be restored as normal Item archive abandoning Message Id: %1 Label: %2 All previous attempts to archive the item have failed or been interrupted. To prevent further failures the item will not be archived. It is probable that the item will remain as 'pending archive' in the user's mailbox. <br>e.g.<br> Item archive abandoning <br> Message Id: {484HFDSY-743B-4410-8D1C-JF6064709ABE}\9543830 <br> Label: Saveset Message for Mailbox /o=ACME/ou=Messaging Administrative Group/cn=Recipients/cn=DowdP, Message titled: MessageTitle <br> All previous attempts to archive the item have failed or been interrupted. To prevent further failures the item will not be archived. It is probable that the item will remain as 'pending archive' in the user's mailbox.

Abnormal error occurred Reason: %1 Vault: %2 Vault Id: %3 Reference: %4 Supplementary Info: %5 %6

Abnormal error occurred Object: %1 Reference: %2 <br>e.g.<br> Abnormal error occurred<br> Object: CVaultStatusCache<br> Reference: C/ICEP<br>

The Archive is currently unavailable. Archive Name: %1 Vault Id: %2 Reference: %3 Possible reasons include the Archive's index is being updated, the Archive is reserved exclusively for bulk archiving (such as PST migration) or the Archive is being deleted

Unable to refresh Vault configuration details from the Directory Vault Id: %1 Operation is continuing using cached configuration details

Unable to set Vault status to unavailable in the Directory Vault Id: %1 Operation is continuing though some applications, such as the web application, may seem to allow access to the Vault. However actions such as attempting to delete items from the Vault will fail because the Vault is not currently available Item cannot be archived. Several attempts to archive the item have failed or been interrupted. To prevent further failures the item should not be presented for archival again. Vault Store database operation requires current Vault to be set. [Internal reference %1] <br>e.g.<br> Vault Store database operation requires current Vault to be set. [Internal reference VSDBGVUV4]

PST Migration Report Migration status: %1 PST file: %2 Archive Name: %3 Vault Id: %4 Number of folders processed: %5 Number of items archived: %6 Total size of items archived: %7 KB Number of items unable to be archived: %8 Start Time: %9 End Time: %10 Unexpected MAPI error encountered Error: %1 Component: %2 Reference: %3<br>e.g.<br> Error: The file D:\user1.pst is not compatible with this version of the Personal Folders information service. Contact your administrator. <br> Component: Personal Folders <br> Reference: CPSTHelper::ConfigurePST/CMS1 You do not have the correct license to run the PST Migration Service. Either your license has expired or you do not have a license. If you want to use the PST Migration Service, please contact your license supplier.

An exception has occurred. A StorageDelete process has aborted: %1 [Internal reference %2] <br>e.g.<br> An exception has occurred. A StorageDelete process has aborted: Unspecified error [0x80004005] [Internal reference EXPME]

e.g.<br> Storage Expiry Report <p> Vault Store Name: Vault Store 5 <br> Vault Store Id: 108059CA5FF8E724187568F7C863FCA6F1210000acme.kvsvault.com <p> Number of vaults processed: 7 <br> Number of vaults enabled for expiry: 7 <br> Total number of expired items deleted: 0 <br> <p> Items were deleted with the following retention categories: (none) <p> No items were deleted with the following retention categories: <br> PST (119988 months). Miscellaneous (12 months). Public (119988 months). Business (119988 months). Uncategorized (9999 years). Sent Items (119988 months). Deleted Items (3 months). Personal (60 months). <p> Expiry based on archived date <p> Start Time: 15/02/2004 12:00 <br> End Time: 15/02/2004 12:00Failed to process all expired items in Vault. %1 Vault Name: %2 Vault Id: %3 <br>e.g.<br> Failed to process all expired items in Vault. <br> Error Could not delete a saveset [0xc004188b]<br> Vault Name: Elwood P Dowd <br> Vault Id: 54DJ4431Q37022E458AD5452578FA566D1110000zko.acme.com Failed to process all expired items in Vault Store. %1 Vault Store Name: %2 Vault Store Id: %3 <br>e.g.<br> Failed to process all expired items in Vault Store. Unable to Create Connection [0xc004340e] Vault Store Name: ACMEStore Vault Store Id: 56RTJ34MS2F1FE649915862E2B4C9390B1210000vault.acme.com

PST file access error occurred PST file: %1 Account: %2 Reference: %3 <br>e.g.<br> PST file access error occurred <br> PST file: E:\DOWDP_2002.pst <br> Account: ACME\VAULT <br> Reference: SUP/CFE <br>

Storage Expiry stopped because all remaining Vaults are being compacted or replayed Vault Store Name: %1 Vault Store Id: %2 The remaining Vaults will be processed when Storage Expiry next runs Storage Expiry Report (Report Mode) Vault Store Name: %1 Vault Store Id: %2 Number of vaults processed: %3 Number of vaults enabled for expiry: %4 Total number of expired items: %5 Items have expired with the following retention categories: %10 No items have expired with the following retention categories: %11 Expiry based on %12 Start Time: %6 %7 End Time: %8 %9

An exception has occurred. Type: %2 Reference: %3 Reason: %1 <br>e.g.<br> An exception has occurred. <br> Type: ce <br> Reference: VSEMCC/CCSOS1 <br> Reason: The system cannot find the path specified. [0x80070003] <br>

This is an example. Some details will be different<br> Unable to convert item content <p> Reason: Unspecified error [0x80004005] <br> Supplementary Info: Unknown converter error (0) <p> Item: Saveset Message for Mailbox /O=ACME/OU=ZKO/CN=RECIPIENTS/CN=DOWDP, Message titled: Invoice Subject: Invoices <br> Attachment: invoice1.pdf<br> Type: pdf <br> This item will be archived without a preview being available to the web application and the content will not be indexed. It is not possible to search on the content but the item can be restored as normal**This is an example. Some details may be different**<p> Unable to convert item content to HTML. The content has been converted to text<p> Reason: The requested allocation size was too large [0x80080011] Supplementary Info: <p> Item: SA:FSA-7C02A898D9FCBE26F617C3C20429F7A7--1751237826 Subject: hlog.zip <br> Attachment: <br> Type: zip <br> <p> The content of this item failed conversion to HTML but has been successfully converted to text. The item will be archived normally but the preview available in the web application will be text rather than HTML

Corrupt Storage Archive MSMQ queue entry discarded. Message Id: %1 Label: %2 Buffer for uncompressed data: %3 bytes Compressed data size: %4 bytes To prevent further failures the item will not be archived. It is probable that the item will remain as 'pending archive' in the user's mailbox.

Delete Vault failed Reason: %1 Vault Name: %2 Vault Store: %4 Vault Id: %3 <br>e.g.<br> Delete Vault failed <br> Reason: Access is denied. [0x80070005] <br> Vault Name: Elwood Dowd Vault Store: Main Store Vault Id: 1REFASDFASD48DA46B6419F7163BA80C31110000vault.acme.com

e.g.<br> Update of Vault Index completed processing Storage transactions from 28898 to 38898. Continuing... <br> Vault: Elwood Dowd <Br> Vault Id: 12T63123FEBDAD3119CAB00508B070AE51110000vault.acme.com <br> Vault Store: Production <br> Vault Store Id: 114TRG6WFEBDAD3119CAB00508B070AE51210000vault.acme.com

Storage Deletion Server has failed Reason: %1 <br>e.g.<br> Storage Deletion Server has failed <br> Reason: Catastrophic failure [0x8000ffff] Archive has been deleted Archive Name: %1 Vault Store: %3 Archive Id: %2 <br>e.g.<br> Archive has been deleted <p> Archive Name: Dowd, Elwood <br> Vault Store: ACMESTORE1 <br> Archive Id: 5R412WQGT6CABC6408992087E9929AC071110000Evault.acme.com

%1 (%2) - Restarting failed process PID: %3 Exit Code: %4 The process has failed abnormally and will be restarted automatically <p> e.g.<br> Storage Archive Server (3) - Restarting failed process <p> The process has failed abnormally and will be restarted automatically %1 (%2) - Process failed PID: %3 Exit Code: %4 The process has failed abnormally and will not be restarted. Either the process has exceeded its restart count or automatic restart is disabled. The process can be restarted by stopping and restarting the Storage Service <br>For example:<br> Storage Archive Server (6) - Process failed <br> PID: 0 <br> Exit Code: Unspecified error [0x80004005] <br> <br> The process has failed abnormally and will not be restarted. Either the process has exceeded its restart count or automatic restart is disabled. The process can be restarted by stopping and restarting the Storage Service Error starting process Reason: %1 Process: %2 (%3) Reference: %4 <br>e.g.<br> Error starting process <br> Reason: The server process could not be started because the configured identity is incorrect. Check the username and password. [0x8000401a] <br> Process: Storage Archive Server (6) <br> Reference: RunTheProcess/CCI <br>

File I/O Function error: Reason: %1 Path: %2 Reference: %3 <p>e.g.<br> File I/O Function error: Reason: There is not enough space on the disk. [0x80070070] Path: E:\Enterprise Vault Stores\Journal\2003\03\21\09\313000000000000~200304233114110000~0.DVS Reference: VSIS5 A request was made to delete an archived item, but the containing Vault needs to be re-indexed first. The deletion has not been performed.

The Vault Store contains one or more Archives which are currently unavailable. VaultStore: %1 Possible reasons include the Archive's index is being updated or the Archive is reserved exclusively for bulk archiving (such as PST migration).

The Vault Store could not be completely deleted because its database was in use. Vault Store Name: %1 Vault Store Id: %2 The operation will be retried when the Storage Service is next started.

Error occurred issuing job progress update. Reason: %1 Reference: %2 Migration will continue but further job progress updates for the current PST may not be possible. Job progress updates will be re-established upon processing the next PST.

Unable to access the Directory Service on %1 Check that the Directory Service is running. The process will automatically continue normal operation as soon as the Directory Service becomes available. Unable to access Indexing Service on %1 Check that the Indexing Service is running. The process will automatically continue normal operation as soon as the Indexing Service becomes available. <br>e.g.<br>Unable to access Indexing Service on acmevault.acme.com <br> Check that the Indexing Service is running. The process will automatically continue normal operation as soon as the Indexing Service becomes available.

%1 (%2) - Process stopped PID: %3 Exit Code: %4 The process has stopped due to an unrecoverable error and will not be restarted. Check the event log for previous errors. Once the problem has been resolved the process can be restarted by stopping and restarting the Storage Service

Error compacting PST file PST file: %1 Reference: %2 PST migration has been successfully completed but compaction failed. If you need to compact this PST file, use Outlook. There was an error with the Storage Expiry search dates Search date: %1 %2 Verification date: %3 %4 Storage Expiry will resume at the next scheduled period

Exchange Server mailbox access error occurred Exchange Server: %1 Exchange Privileged Mailbox: %2 Mailbox DN: %3 Reference: %4 <br>e.g.<br> Exchange Server mailbox access error occurred <br> Exchange Server: ACMEEXCH1 <br> Exchange Privileged Mailbox: EnterpriseVault-ACMEEXCH1 <br> Mailbox DN: /o=ACME/ou=REO /cn=Recipients/cn=Dowdp <br> Reference: OMMS/GMSFP <br> An error occurred while moving items from the PST file to the designated Exchange Server mailbox folder PST file: %1 Exchange Server: %2 Mailbox DN: %3 Mailbox Folder: %4 Reference: %5 <br>e.g.<br> An error occurred while moving items from the PST file to the designated Exchange Server mailbox folder<br> PST file: E:\DOWDP_2002.PST <br> Exchange Server: ACMEEX1 <br> Mailbox DN: /O=ACME/OU=REO/CN=RECIPIENTS/CN=DOWDP<br> Mailbox Folder: Recruitment<br> Reference: MCM/GCT <br> Failed to start a new Storage FileWatch thread to watch the new Vault Store. Reason: %1 The Storage Service will need to be restarted in order for FileWatch to start watching this Vault Store. Failed to start a new Storage Expiry thread to process the new Vault Store. Reason: %1 The Storage Service will need to be restarted in order it to begin expiring items in this Vault Store.

The Storage Service will not be started because one or more Vault Stores with unsupported database schemas have been detected. See previous events. FileWatch wait thread for partition "%1" has failed FileWatch will continue but there may be a delay in removing safety copies from mailboxes after the partition has been backed up. PST Migration Report Migration status: %1 PST file: %2 Archive Name: %3 Vault Id: %4 Exchange Server\Mailbox: %5 Number of folders processed: %6 Number of items archived: %7 Total size of items archived: %8 KB Number of items unable to be archived: %9 Number of items moved to mailbox: %10 Start Time: %11 End Time: %12

Archive operation canceled because Saveset file does not contain per-user information. [Vault Store: %1] [Vault ID: %2] [Saveset Filename: %3] [Transaction ID: %4] FileWatch scan thread for partition '%2' cannot access the root path directory '%3'. FileWatch will wait for the rescan interval and try again. Error: %1

Starting Index Update with Storage transactions from 1 to 4810 <BR> Vault: Elwood Dowd<BR> Vault Id: 41HQEI812F653841B1401266A4093F861110000vault.acme.com <BR> Vault Store: Sales <BR> Vault Store Id: 125URQ123JB8AD4119CE200508B070AE51210000vault.acme.com <BR> Completed update of Vault Index with Storage transactions 1 to 4810 <BR> Vault: Elwood Dowd<BR> Vault Id: 1C61C1F20FF653841B1401266A4093F861110000vault.acme.com<br> Vault Store: Sales <br> Vault Store Id: 192696B383B8AD4119CE200508B070AE51210000vault.acme.com<br> Elapsed Time: 0:12:18 <br> Number of index additions replayed: 4810<br> Number of index deletions replayed: 0 Update of Vault Index with Storage transactions %5 to %6 suspended whilst processing transaction number %7 Vault: %2 Vault Id: %1 Vault Store: %3 Vault Store Id: %4 Elapsed Time: %8 (hours:minutes:seconds) Number of index additions replayed: %9 Number of index deletions replayed: %10 NOTE: The total number of index additions and deletions replayed may be less than the number of transactions processed. This is because the index update process is optimized so that index additions are not replayed for items that are known to have been fully deleted from the Vault. Number of archived items with an old version of the common index elements: %11 Number of archived items updated with the latest version of the common index elements: %12 NOTE: Index additions were performed using the latest version of the common index elements stored in the archived item. Where necessary the archived item was updated with the latest version of the common index elements. Update of Vault Index with Storage transactions from %5 to %6 suspended whilst processing transaction number %7 Vault: %2 Vault Id: %1 Vault Store: %3 Vault Store Id: %4 Elapsed Time: %8 (hours:minutes:seconds) Number of index additions replayed: %9 Number of index deletions replayed: %10 Unable to update the common index elements of the archived item. Reason: %1 Saveset Id: %2 Vault: %3 Vault Id: %4 Vault Store: %5 Vault Store Id: %6 NOTE: The archived item could not be updated with the latest version of the common index elements. The old version still exists in the item and will be used for the current index update process. <p>Abnormal error occurred Error: %1 Reference: %2 Info: %3 %4 %5 </p> <p>e.g.</p><font size="1"> <p><font size="3">Abnormal error occurred</font></p> <p><font size="3">Error: Cannot create a file when that file already exists. [0x800700b7]</font></p> <p><font size="3">Reference: CMC/ce</font></p> <p><font size="3">Info: CItemFetcher::FetchIndexMetadata</font></p> <p></p> <p></p></font>Cache Statistics Report Process Id: %1 Executable: %2 Cache Name: %3 Maximum Entries: %4 Entry Expiry Timeout: %5 (seconds) Number of Entries: %6 Elapsed: %7 (hours:minutes:seconds) Hits: %8 Misses: %9 Expiries: %10 Evictions: %11

Index Update not required as the index is up to date Vault: %1 Vault Id: %2 Vault Store: %3 Vault Store Id: %4 Last Transaction: %5 Catalogue is not up to date and requires replay Vault: %1 Vault Id: %2 Vault Store: %3 Vault Store Id: %4 Last Transaction: %5 <br>e.g.<br> Catalogue is not up to date and requires replay <Br> Vault: Elwood Dowd <br> Vault Id: 41231EWQ18C42C046AE3A767A5700FC641110000acme.com<Br> Vault Store: Sales <br> Vault Store Id: 4123RQ7453B8AD4119CE200508B070AE51210000acme.com<br> Last Transaction: 0 <br> Restarting update of Vault Index with Storage transactions from %1 to %2 Vault: %4 Vault Id: %3 Vault Store: %5 Vault Store Id: %6 NOTE: Index additions will use the common index elements currently stored in the archived item. Restarting Index Update with Storage transactions from 191673 to 241532 <br> Vault: Elwood Dowd<br> Vault Id: 41URGQ09FEBDAD3119CAB00508B070AE51110000vault.acme.com <br> Vault Store: Production <br> Vault Store Id: 210RE6Q3FEBDAD3119CAB00508B070AE51210000vault.acme.com PST Migration Report Migration status: %1 PST file: %2 Archive Name: %3 Vault Id: %4 RetentionCategory: %5 Number of folders processed: %6 Number of items archived: %7 Total size of items archived: %8 KB Number of items unable to be archived: %9 Elapsed Migration Time: %10 (hours:minutes:seconds) Example <p>PST Migration Report </p> <p>Migration status: Completed </p> <p>PST file: d:migrationsdowdp.pst <br />Archive Name: Elwood Dowd <br />Vault Id: 5F65JKE3T29DC114B96E02C9692488B0C1110000acme.com<br />RetentionCategory: Default <br />Exchange ServerMailbox: ACMEEXCH1Elwood Dowd </p> <p>Number of folders processed: 148 <br />Number of items archived: 11165 <br />Total size of items archived: 1372488 KB</p> <p>Number of items unable to be archived: 0 <br />Number of items moved to mailbox: 11428 </p> <p>Elapsed Migration Time: 2:27:20 (hours:minutes:seconds) </p>

Error reading the associated mailbox details from the Vault Directory Vault ID: %1 A possible cause is that there is no associated mailbox for this vault. Addition of item to catalogue abandoned <br> Catalogue: Journal 2004 <br> Catalogue Id: 643FB28D8F422214786182DA3AA60FF161110000vault.acme.com <br> Saveset Id: 123000000000000~200307543135410000~0~65F4F78AF7B043E0BF9DEC8BF46EE38 <br> Transaction: 10831 <br> All previous attempts to add the item to the catalogue have failed or been interrupted. To prevent further failures the item will not be indexed.Deletion of item from catalogue abandoned Catalogue: %1 Catalogue Id: %2 Saveset Id: %3 Transaction: %4 All previous attempts to remove the item from the catalogue have failed or been interrupted. To prevent further failures the item will be left in the catalogue. Could not determine the default system codepage. To migrate all messages, regardless of their native language, set the following DWORD registry key to the value "2" and retry the migration: HKLM\Software\KVS\Enterprise Vault\Agents\CodepageProcessing

Error loading or freeing EMC Centera FPLibrary.Dll Reason: %1 <br>e.g.<br> Error loading or freeing EMC Centera FPLibrary.Dll Reason: A dynamic link library (DLL) initialization routine failed. [0x8007045a]

Error connecting to EMC Centera Function call: %1 Status: %2 (%3) Reason: %4 <br />e.g.<br />Error connecting to EMC Centera <br />Function call: Status: (-10215) Reason: %4Error from EMC Centera FPLibrary Function call: %1 Status: %2 (%3) Reason: %4 Pool Address: %5 <br>e.g.<br> Error from EMC Centera FPLibrary <br> Function call: HPPPacket.checkControlStatus: FP_SERVER_ERR (-10005) <br> Reason: The server reported an error from the operation (transid='bos-330-03/135/DELETE_CLIP') <br> Pool Address: 141.14.23.11,141.14.23.12 <br> Error opening EMC Centera C-Clip Function call: %1 Status: %2 (%3) Reason: %4 Pool Address: %5 <br>e.g.<br> Error opening EMC Centera C-Clip Function call: NetworkPacket.checkControl(2){HPPReadBlobTransaction.readBytes(HPPImportData&){HPPReadBlobTransaction.run(){ClusterCloud::readBlob(FPBasicGenericStream*,D4121FDA319ACe22ACME,,0,-1,-1,0){FPClip.Open(D4121FDA319ACe22ACME,1){FPClip_Open(-,FVF4VEEA319ACe22M8KSP0ACME,1) Status: FP_CLIP_NOT_FOUND_ERR (-10021) Reason: Clip CDF is not found in the pool (transid='ACMEVAULT01/931/READ_CLIP') Pool Address: 10.169.3.115,10.169.3.116,10.169.3.117,10.169.3.118

EMC Centera C-Clip contains incorrect Saveset Pool Address: %1 ClipId: %2 Expected: VaultStoreId: %3 VaultId: %4 SavesetId: %5 Received: VaultStoreId: %6 VaultId: %7 SavesetId: %8 <br>e.g.<br> EMC Centera C-Clip contains incorrect Saveset <br> Pool Address: 10.28.0.11,10.28.0.12,10.28.0.13,10.48.0.14 <br> ClipId: 543rt642IULOHeAFGKEQCSHP7OC <br> Expected: <br> VaultStoreId: 54RG67UIFF82E2F409375B900DEE0EB0A1210000ACMEVAULT <br> VaultId: 554FG6E37395ED94FAC9B99FDA89A0AB41110000ACMEVAULT<br> SavesetId: 219000000000000~200302040749290000~0~T5R43297FC0E4ACB961D6F17D06FB30 <br> Received: <br> VaultStoreId: 54RG67UIFF82E2F409375B900DEE0EB0A1210000ACMEVAULT <br> VaultId: &#53588;ñ&#7924;&#27075;&#53356;ñ&#27056;&#406; <br> SavesetId: 219000000000000~200302040749290000~0~T5R43297FC0E4ACB961D6F17D06FB30 <br> Could not execute Saveset database transaction Reason: %1 Saveset Id: %2 Transaction: %3 Reference: %4 <br />e.g.<br />Could not execute Saveset database transaction <br />Reason: The Vault is busy [0xc0041800] <br />Saveset Id: 432193400000000~200305232028550000~0~FF31EDE40FF44FBBBDEDA6467BC19E5 <br />Transaction: FF31EDE40FF44FBBBDEDA6467BC19E5 <br />Reference:FileWatch scan thread for partition "%1" cannot connect to EMC Centera Replica system FileWatch will wait for the rescan interval and try again.

Replay Index operations have been requested for Vaults in the "%1" Vault Store so that the setting of Retention Category information can be completed. The Storage Service should be restarted and the Schema upgrade run again. Export Archive Report Export status: %1 Job Id: %2 Vault Name: %3 Vault Id: %4 Target Exchange Server\Mailbox: %5 Number of items restored: %6 Number of items unable to be restored: %7 Age range filter: %8 Retention category filter: %9 Elapsed Export Time: %10 (hours:minutes:seconds) <br>e.g.<br> Export Archive Report <BR> Export status: Completed <BR> Job Id: Exp1_20040621132529 <BR> Vault Name: Dowd, Elwood <BR> Vault Id: 14RT65322AD4FB4EA842C4106A2DA8401110000vault.acme.com<br> Target Exchange Server\Mailbox: ACMEEXCH1\Dowd, Elwood <br> Number of items restored: 321<br> Number of items unable to be restored: 2<br> Age range filter: (None) Retention category filter: (None) Elapsed Export Time: 00:04:18 (hours:minutes:seconds) <br>e.g.<br> Export Archive Report <br> Export status: Incomplete <br> Processing aborted due to an unrecoverable error. <br> Job Id: Exp3_20041414431943 <br> Archive Name: Dowd, Elwood<br> Vault Id: 5UTRLEW061FE5424A863424CFE79589991110000acme.com <br> Target PST file location: D:\PST Export\Dowd,Elwood_Export_0001.pst <br> Number of PST files: 1 <br> Number of items restored: 0 <br> Number of items unable to be restored: 1<br> Age range filter: <None> <br> Retention category filter: <None> <br> Elapsed Export Time: 00:00:05 (hours:minutes:seconds)

EMC Centera Server is not ready. Pool Address: %1 This can occur when Storage nodes have not been initialized yet, or the Cluster is in read-only mode because a power rail has failed.

The Clip cannot be deleted from the EMC Centera Server. Pool Address: %1 Clip-Id: %2 VaultStoreId: %3 VaultId: %4 SavesetId: %5 This can be caused by the Clip Retention period or because the Centera does not allow deletes to be performed. <br />e.g.<br />The Clip cannot be deleted from the EMC Centera Server. <br />Pool Address: 127.13.17.13<br />Clip-Id: 3NMK8VSBGFOERe4LGVFV8V6BA5MG60VRFCN700000000000000000<br />VaultStoreId: 12FTR563123D88748849605BB6359FBB41210000vault.acme.com <br />VaultId: 414123120C102F041A2AA756D994B8D4E1110000vault.acme.com <br />SavesetId: 152000000000000~200401071644180000~0~BBB164935DB140AFBC5244C49865726 <br />This can be caused by the Clip Retention period or because the Centera does not allow deletes to be performed.

The Archive is currently unavailable for exporting. Archive Name: %1 Vault Id: %2 Possible reasons include the Archive's index is being updated, the Archive is reserved exclusively for bulk archiving (such as PST migration) or the Archive is being deleted

Error restoring Saveset during export operation. Job Id: %1 Vault Name: %2 Vault Id: %3 Saveset Id: %4 Reference: %5 <br>e.g.<br> Error restoring Saveset during export operation. Job Id: Exp3_20042227161943 <br> Vault Name: Dowd, Elwood<br> Vault Id: 59RG8R4L61FE5424A863424CFE79589991110000acme.com <br> Saveset Id: 54F040000000000~200203101505520000~0~RE43E359B16F4A71A68289D6D6F4501 <br> Reference: FMP/MAPI/SC <br> One or more Savesets are offline and the registry value SkipIfOffline is set. Any offline Savesets will have been skipped during the export operation. Job Id: %1 Vault Name: %2 Vault Id: %3 Internal Reference: %4 A COM exception has been raised. %1 Internal reference %2 An exception is raised when a process encounters an unexpected fault. Contact your support representative with details of this and any preceding errors. <br>e.g.<br> A COM exception has been raised. <br> The SQL database server detected a deadlock while accessing the Vault Database '' <br>Description: Additional Microsoft supplied information: Source: Number: SQL State: Native Error: HRESULT SQL Command: [0xc0043433] Internal reference VaultStoreDB.cpp (CVaultStoreDB::GetNextSafeUniqueNumber) [lines {1994,2016,2019,2020,2021,2024}] built May 20 16:28:38 2004 <br> An exception is raised when a process encounters an unexpected fault. Contact your support representative with details of this and any preceding errors. A general exception has been raised. Internal reference %1 An exception is raised when a process encounters an unexpected fault. Contact your support representative with details of this and any preceding errors.

Unable to create Vault Store Partition. Vault Store : %2 Destination : %3 Internal references: Flags : %4 Error : %1 Reference : %5

The Partition Cache is empty. The EnumPartitionsByMigrator method must be successfully called before any other methods of the IMigratorAssister interface.

The requested Partition was not found in the Partition Cache. Either EnumPartitionsByMigrator has never been called or the Partition no longer exists.

Failed to read the ProgID of the HSM Software Component from the Directory. HSMType : %1 Method : %2 <br>e.g.<br> Failed to read the ProgID of the HSM Software Component from the Directory. <br> HSMType : 0 <br> Method : CVaultStoreDB::GetSavesetFilePath <br>

An attempt was made to rebuild the shared indexable item for one or more Savesets that have been Migrated. The Savesets in question will have their shared indexable items replayed as it is not possible to rebuild them. If a rebuild really is required then the Savesets will need to be Unmigrated. Vault: %1 Vault Id: %2 Vault Store: %3 Vault Store Id: %4 Method : %5 Failed attempting to inform the HSM Software Component with ProgID %1 that a Saveset has been deleted. Saveset Id : %2 Vault Id: %3 Method : %4

Could not store an item in the saveset file. Reason: %1 Saveset File: %2 This archive attempt has been canceled. <p>e.g.<br> Could not store an item in the saveset file. Reason: Saveset compression failed. Error: Context: [0xc0041aa6] Saveset File: E:\Enterprise Vault Stores\Journal\2003\06\21\08\941300000000000~200304212211490000~0.DVS This archive attempt has been canceled.

Failed to write CAB file. <br> Reason: FCI Error. Could not create a temporary file <Br> CAB File: \\ukshare\vault\Enterprise Vault Stores\Eng\2003\04\10\Collection12.CAB Failed to extract CAB file. Reason: %1. %2 CAB File: %3 <p>e.g.<br> Failed to extract CAB file. Reason: FDI Error. Failure writing to target file CAB File: E:\Enterprise Vault Stores\Eng\2003\03\10\Collection5116.CAB

Failed to instantiate the GrauCollection object of the Grau Collection API. This API is implemented in the 3rd party Grau library GrauCollection_API.lib. Failed to recall a Saveset from its Collection. Reason: %1 Saveset: %2 Collection: %3 <p>e.g.<br> Failed to recall a Saveset from its Collection. Reason: Failed to extract CAB file. [0xc0041b0f] Saveset: E:\Enterprise Vault Stores\Eng\2003\03\10\14\122500000000000~200303104400350000~0.ARCHDVS <Br> Collection: E:\Enterprise Vault Stores\Eng\2003\03\10\Collection5116.CAB

An item in the index has an invalid retention category and has been set to 'Uncategorized'. Archive Id: %2 Saveset Id: %3 Retention Category Id: %4 e.g. A Collector encountered an error.<Br> Reason: Error from EMC Centera FPLibrary Function call: Status: () Reason: Pool Address: [0xc0041a68] <br> PartitionEntryID: 4F4213B19A778EF4DBF93BD440FCD79E81q10000ACME.COM <br> Method: CCollectorEMCCentera::HouseKeep

The Collector is not running. Check the Storage Service is running and the Partition still exists. The Collector may also have been scripted to stop via the StopPartitionCollector method. The Storage Service may require a restart.

The requested maximum collection size exceeded the maximum permitted. Requested maximum: %1 Permitted maximum: %2 Method: %3

The Collector Manager encountered an error. Reason: %1 Method: %2 <br>e.g.<br> The Collector Manager encountered an error. Reason: The Partition Cache is empty. The EnumPartitionsByMigrator method must be successfully called before any other methods of the IMigratorAssister interface. [0xc0041a92] Method: CCollectorManager::CollectorManager The Collector Manager is not running. Check the Storage Service is running and that no previous errors have been logged. The Storage Service may require a restart. Another StorageFileWatch process running on this machine is using the Collector Manager. Only a single StorageFileWatch process may use the Collector Manager at any given time. The Collector Manager failed to create/start a Partitions Collector. Collection will not take place for this Partition. The Storage Service needs to be restarted in order for Collection to occur in this Partition. Reason: %1 PartitionEntryID: %2 Method: %3 A request was made to resume a Collector for a Partition that is either not being managed by this machine, or the Partition is not using Enterprise Vault Collections i.e. Is of the wrong HSM type.

A Partition's Collector run has started. Partition Root Path: %1 <br>e.g.<br> A Partition's Collector run has started. <br> Partition Root Path: E:\Enterprise Vault Stores\Eng A Partition's Collector run has finished. Partition Root Path: %1 %2 Saveset(s) were Collected into %3 Collection(s). The run completed in %4. <br>e.g.<br> A Partition's Collector run has finished. <br> Partition Root Path: E:\Enterprise Vault Stores\Eng <br> 193 Saveset(s) were Collected into 6 Collection(s). <br> The run completed in 0 hour(s), 4 minute(s), 25 second(s). A Partition's Collector will not compact a Collection that contains no more files before expiry/deletion than the number of files defining a Sparse Collection. Partition Root Path: %1 Collection File: %2 Number of files in Collection: %3 Number of files defining a Sparse Collection to be compacted: %4 The database for Vault Store '%1' has a schema version of '%2', which is not the latest version. The Vault Store should be updated using the Vault Administration Console as soon as possible. Starting population of Retention Category information in Vault Store '%1'. Saveset records to be updated: %2 <br>e.g.<br> Starting population of Retention Category information in Vault Store 'ACME STORE1'. <br> Saveset records to be updated: 313541 <br>Completed population of Retention Category information in Vault Store '%1'. Saveset records updated: %2 The schema version has been set to 'V4.0-001'. Completed population of Retention Category information in Vault Store '%1'. Saveset records updated: %2 The schema version could not be updated'. Population of Retention Category information in Vault Store '%1' stopped. Saveset records updated: %2 Saveset records remaining to be updated: %3 The population of Retention Category information will be resumed the next time the Storage Service is started. Completed population of Retention Category information in Vault Store '%1'. Saveset records updated: %2 The Vault Store schema version is '%3', which is not the latest version. The Vault Store should be updated using the Vault Administration Console. Error during population of Retention Category information in Vault Store '%2'. Reason: %1 <br>e.g.<br> Error during population of Retention Category information in Vault Store 'ACME STORE1'. Reason: The remote procedure call failed. [0x800706be] The population of Retention Category information for the Vault Store '%1' could not be completed because information is missing from an Index. Saveset records updated: %2 Saveset records remaining to be updated: %3 Index Replay operations have been requested to recover this information. The population of Retention Category information will be resumed the next time the Storage Service is started. An error occurred while calling the Grau Collection API. This API is implemented in the 3rd party Grau library GrauCollection_API.lib. Reason: %1. %2 Method: %3 Grau Method: %4

A Collector encountered a recoverable fault while processing a file. This can occasionally occur, but should this warning continue to be logged for the SAME FILE then contact your support representative. Reason: %1 PartitionEntryID: %2 File: %3 Method: %4 The database for Vault Store '%1' has a schema version of '%2', which is not the latest version. The Vault Store should be updated using the Vault Administration Console as soon as possible. The use of file management software requires a Vault Store database schema update. The software will not operate until the update is complete and the Storage Service has been restarted.

Error occurred when sending a MQ message %1 %2 <br>e.g.<br> Error occurred when sending a MQ message<br> One or more of the passed properties are invalid. [0xc00e0002]

An error occurred attempting to update Storage database Reason: %1 Reference: %2 Script File: %3 Vault Store: %4 Vault Store Id: %5 Database Name: %6 DSN: %7

Items cannot currently be stored in the Vault. The Vault Store does not contain an open partition. Vault Name: %1 Vault Id: %2 Reference: %3 <p>Unable to complete archive request Reason: %1 Vault: %2 Vault Id: %3 Item: %4 Item Id: %5 Reference: %6 Supplementary Info: %7 </p> <p>e.g.</p> <p>Unable to complete archive request<br /><br />Reason: Item cannot be archived. Several attempts to archive the item have failed or been interrupted. To prevent further failures the item should not be presented for archival again. [0xc00419bb]<br />Vault: Misc<br />Vault Id: 1S4A45111C30D4944B86F75044F1999291110000ACME<br />Item: Saveset Message for Mailbox /o=ACME /ou=zko/cn=Recipients/cn=DowdP, Message titled: Six foot white rabbits<br /></p>Unable to complete retrieval request Reason: %1 Vault: %2 Vault Id: %3 Item Id: %4 Reference: %5 Suplementary Info: %6 %7 <br>e.g.<br> Unable to complete retrieval request <br> Reason: The parameter is incorrect. [0x80070057] <br> Vault: Elwood P Dowd Vault Id: 14123R5C6A87D544CB21A585D9047C2F71110000acme Item Id: 14123R5C6A87D544CB21A585D9047C2F71110000acme+300120000000000~200204110843120000~0~CEB18767AC5242B7A0D1D9DA18D5695+0++1321+2+38229.601894444444+86+702 Reference: LMI/rs Suplementary Info: EnterpriseVault.Collector Id: 1321 Unable to complete deletion request Reason: %1 Vault: %2 Vault Id: %3 Item Id: %4 Reference: %5 Supplementary Info: %6 %7 Unable to complete item properties request Reason: %1 Vault: %2 Vault Id: %3 Item Id: %4 Reference: %5 Supplementary Info: %6 %7

Unable to retrieve item, if an HSM is being used check that it is running Saveset Id: %1 Saveset File: %2 Vault Store: %3 Vault Store Id: %4 Partition: %5 Partition Id: %6

The request was refused due to insufficient privileges. User must be an administrator to perform this operation User: %1 Request: %2 Supplementary Info: %3

The 'SparseCollectionPercentage' registry value was set to %1. This percentage is outside the acceptable range of [0, 99] and will be ignored. Instead, the default percentage of %2 will be used by each Collector. Cannot find the Enterprise Vault document conversion template file. Reason: %1 Template File: %2 Reverting to the standard template to generate HTML output. <br>e.g.<br> Cannot find the Enterprise Vault document conversion template file. <br> Reason: The system cannot find the file specified. [0x80070002] <br> Template File: C:\Program Files\Enterprise Vault\Converters\EVTemplateMain.htm <br> Reverting to the standard template to generate HTML output. <br>

Unable to update Vault Store Partition record. Partition : %2 Destination : %3 Internal references: Flags : %4 Error : %1 Reference : %5 <br>e.g.<br> Unable to update Vault Store Partition record.<br> Partition : 4JF8RKDSU7453LDPQ348A590E78088278071q10000kvault.acme.com<br> Destination : Internal references:<br> Flags : <br> Error : EMC Centera Collection cannot be disabled until all uncollected Savesets have been collected. If the Storage Service is not running start it and try again later. If the Storage Service is running try again later. [0xc0041af9]<br> Reference : StorageManage.cpp (CStorageManage::EMCCenteraDisableCollection) [lines {...,2967,2968,2977,2978,2982,2986,2987,2988,2998,3013,3017,3019}] built Feb 13 18:34:42 2004

EMC Centera Collection cannot be disabled until all uncollected Savesets have been collected. If the Storage Service is not running start it and try again later. If the Storage Service is running try again later. The PST migration has failed because the structured archive does not contain a root folder. You must synchronize the folder hierarchy of the mailbox. See the administration help on how to synchronise a mailbox.

Some items could not be deleted from the PST file. Number of items not deleted: %1 PST file: %2 Archive Name: %3 Vault Id: %4 Some items could not be moved to the target mailbox. Number of items not moved: %1 PST file: %2 Archive Name: %3 Vault Id: %4 Exchange Server\Mailbox: %5 Some items could not be converted to shortcuts. Number of items not converted: 1 <P></P> PST file: D:\PSTpilot\ARCHIVE.PST<P></P> Archive Name: Test User<P></P> Vault Id: 181D3E8273ED1E441A1449EE6594311281110000KVAULT.local Index update request abandoned. Index Id: %1 Request: %2 All previous attempts to process the Index update request have failed or been interrupted. To prevent further failures the request will be discarded.

A Partition's Collector run has finished. Partition Root Path: %1 %2 Saveset(s) were Collected into %3 Collection(s). %4 Collection(s) were Migrated to secondary storage. The run completed in %5. <br>e.g.<br> A Partition's Collector run has finished. <br> Partition Root Path: G:\Enterprise Vault Stores\ACME <br> 0 Saveset(s) were Collected into 0 Collection(s). <br> 0 Collection(s) were Migrated to secondary storage. <br> The run completed in 0 hour(s), 6 minute(s), 23 second(s). A Collector encountered an error during migration. The Collector will abandon migration for the current run. Migration attempts will continue during future runs. Reason: %1 PartitionEntryID: %2 Secondary Storage Location: %3 Method: %4 (%5) e.g.<br> Completed archive conversion and update of Archive Index with Storage transactions 1 to 86830 <br> Archive: Elwood Dowd <br> Archive Id: 412RET5QD13DBD3119CAC00508B070AE51110000vault.acme.com <br> Vault Store: UK <br> Vault Store Id: 48FHE21DSEBDAD3119CAB00508B070AE51210000vault.acme.com<br> Elapsed Time: 1:10:34 (hours:minutes:seconds) <br> Number of index additions replayed: 1 <br> Number of index deletions replayed: 0 <br> Restarting archive conversion and update of Archive Index with Storage transactions from %1 to %2 Archive: %4 Archive Id: %3 Vault Store: %5 Vault Store Id: %6 NOTE: Index additions will use the common index elements currently stored in the archived item. e.g.<br> Starting archive conversions and update of Archive Index with Storage transactions from 1 to 86830 <br> Archive: Elwood Dowd<br> Archive Id: 412RET5QD13DBD3119CAC00508B070AE51110000vault.acme.com <br> Vault Store: UK <br> Vault Store Id: 48FHE21DSEBDAD3119CAB00508B070AE51210000vault.acme.com

Update of Archive Index with Storage transactions from %5 to %6 suspended whilst processing transaction number %7 during archive conversion Archive: %2 Archive Id: %1 Vault Store: %3 Vault Store Id: %4 Elapsed Time: %8 (hours:minutes:seconds) Number of index additions replayed: %9 Number of index deletions replayed: %10 NOTE: The total number of index additions and deletions replayed may be less than the number of transactions processed. This is because the index update process is optimized so that index additions are not replayed for items that are known to have been fully deleted from the Vault. Number of archived items with an old version of the common index elements: %11 NOTE: Index additions used the common index elements stored in the archived item. Items with old versions of the common index elements may not be indexed with the same level of functionality as items archived using the latest version of the common index elements. e.g.<br> Archive Conversion Report<BR> Archive: Elwood Dowd <BR> Archive Id: 14RE5QWD13DBD3119CAC00508B070AE51110000vault.acme.com<br> Number of items processed: 0 <br> Number of items remaining in original default Archive: 0<BR>Update of Vault Index completed processing Storage transactions from %1 to %2. Continuing... Vault: %4 Vault Id: %3 Vault Store: %5 Vault Store Id: %6 Number of items moved to Archive Folders: %7 Number of new Archive folders created: %8

Error deleting PST file PST file: %1 Reference: %2 PST migration has been successfully completed but deletion of the PST failed. The PST will need to be deleted manually.

<p>A Collector encountered an error attempting to migrate Collection file %2 to %3. The Collector will abandon migration for the current run. Migration attempts will continue during future runs. Reason: %1 PartitionEntryID: %4 Secondary Storage Location: %5 Method: %6 (%7) </p> <p>e.g.</p> <p>A Collector encountered an error attempting to migrate Collection file E:\Enterprise Vault Stores\EXUSNY1 Ptn11\1999\01\02\Collection59766.CAB to F:\US\VAULT_STORES\EXUSNY1\Partition 11 migration\FB933F8AE14B4C4E9593C9212886AB36\1999\01\02\Collection59766.CAB. The Collector will abandon migration for the current run. Migration attempts will continue during future runs. </p> <p>Reason: The system cannot find the path specified. [0x80070003] </p> <p>PartitionEntryID: 1FB933F8AE14B4C4E9593C9212886AB361q10000ACME-NY </p> <p>Secondary Storage Location: F:\US\VAULT_STORES\EXUSNY1\Partition 11 migration </p> <p><font size="1"><font size="3">Method: CMigrator::SendFile (SF/CD/F:\US\VAULT_STORES\EXUSNY1\Partition 11 migration\FB933F8AE14B4C4E9593C9212886AB36)</font> </font></p>A Collector encountered an error attempting to verify the successful migration of Collection file %2. This unverified Collection file has been deleted from the secondary storage location. The Collector will abandon migration for the current run. Migration attempts will continue during future runs. Reason: %1 PartitionEntryID: %3 Secondary Storage Location: %4 Method: %5 (%6) A Collector encountered an error attempting to verify the successful migration of Collection file %2. This unverified Collection file could not be deleted, and should be removed manually from the secondary storage location. The Collector will abandon migration for the current run. Migration attempts will continue during future runs. Reason: %1 PartitionEntryID: %3 Secondary Storage Location: %4 Method: %5 (%6)

Error restoring Saveset during export operation. Operation aborted as there is not enough free disk space. Job Id: %1 Vault Name: %2 Vault Id: %3 Saveset Id: %4 PST Filename: %5 Client request refused due to insufficient privileges user %1 attempted to access the Archive: Archive name: %2 Vault Id: %3 but does not have permission(s) (%4). A frequent cause of this Warning is a user attempting an operation on a forwarded moved or copied shortcut to a Vault for which they do not have the required permission(s). Client request refused due to insufficient privileges user %1 attempted to access the Archive Folder: Archive name: %2 Archive folder path: %3 Vault Id: %4 but does not have permission(s) (%5). A frequent cause of this Warning is a user attempting an operation on a forwarded moved or copied shortcut to a Vault for which they do not have the required permission(s). The Access Control List of the archive/folder identified by %1 has been truncated because its length exceeded the maximum. Number of present Access Control Entries: %2 Number of truncated Access Control Entries: %3<br />e.g.<br />The Access Control List of the archive/folder identified by '140E5472153C07F4E9B91B53658461E1B1110000EV1.acme.com' has been truncated because its length exceeded the maximum.<br /><br />Number of present Access Control Entries: 1820<br />Number of truncated Access Control Entries: 34707<br /><br />For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp<br /><br /><br />

There is not enough disk space to complete compaction of Collection files. Partition root path: %1 Required disk space: %2 Available disk space for compaction: %3 Total free disk space: %4

<p>A EMC Centera Collector thread encountered an error and has stopped. Reason: %1 PartitionEntryID: %2 Method: %3 </p> <p>e.g.</p> <p><font face="Courier New"><font size="4"><font face="Times New Roman, Times, serif"><span class="FIXEDFONT">A EMC Centera Collector thread encountered an error and has stopped.</span><br /></font><tt><span class="FIXEDFONT"><font face="Times New Roman, Times, serif">Reason: Not enough storage is available to complete this operation. &nbsp;[0x8007000e]</font>&nbsp;&nbsp;</span></tt></font></font></p>

You do not have a Storage Application Program Interface (API) license. If you want to use the API please contact your license supplier. For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp Your Storage Application Program Interface (API) license has expired. If you want to use the API please contact your license supplier. For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp The Storage Service has started the automatic upgrade of the %1 Database. The Storage Service will become fully operational when the upgrade is complete. For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp The Storage Service has completed the automatic upgrade of the %1 Database. For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp The archived item is being retrieved from a slow device. Try again later. For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp Failed to read Collection file. Check the Storage Service is running. Reason: %1 Relative Collection Filename: %2 Extract Operation: %3 Reference: %4 For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp Invalid Extract Operation. Extract Operation: %1 Reference: %2 For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp Warning from StorageRestore. %1 SavesetID: %2 VaultID: %3 VaultStoreID: %4 For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp Could not restore temporarily unavailable Saveset during export operation. %1 Job Id: %2 Vault Name: %3 Vault Id: %4 Saveset Id: %5 Reference: %6 For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp Addition of item to catalogue abandoned. %1 Catalogue: %2 Catalogue Id: %3 Vault Store: %4 Vault Store Id: %5 Saveset Id: %6 Relative Collection Filename: %7 Reference: %8 For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp Error starting Storage Crawler. %1 For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp Unable to complete request since a context has not been set. For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp Unable to complete request since an archive has not been selected. For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp The specified archive does not exist. ArchiveID: %1 For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp

The request was refused because the server is temporarily disabled. For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp Storage Crawler is not enabled. For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp There are no pending item revisions matching the selection criteria. For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp The request was refused because the server is temporarily unavailable. For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp A Partition's Collector/Migrator run has started. Partition Root Path: %1 For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp The MigratorServer cannot start because the required version of MAPI is missing or incorrectly configured on the Enterprise Vault server: To resolve the problem: 1. Stop all Enterprise Vault services and processes that are using MAPI. 2. Ensure that a version of MAPI supplied with Microsoft Outlook 2003 or later is installed and correctly configured on the Enterprise Vault server. 3. Restart the Enterprise Vault services. If the problem persists, see the "Troubleshooting" section of the Enterprise Vault Administration help file for guidelines on how to proceed. For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp An error occurred when calculating the expiration date of a retention category Retention Period: %1 Units: %2 Reference: %3 For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp AutoStorageOnline error. Reason: %1 Reference: %2 For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp Error storing Saveset in Centera Collection temporary file location Reason: %1 Saveset Id: %2 For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp Storage Expiry and Item Deletion are disabled. For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp The archive auto security descriptor structure is invalid. For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp The archive manual security descriptor structure is invalid. For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp The folder auto security descriptor structure is invalid. For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp The folder manual security descriptor structure is invalid. For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp Unable to complete update request Reason: %1 Vault: %2 Vault Id: %3 Item Id: %4 Reference: %5 Supplementary Info: %6 %7 For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp Operation is only supported on a Compliance device on which retention periods can be set, are enforced, and can be changed For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp A PST failed to migrate because it is too full to process. Split the PST and attempt to migrate in two parts. For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp Verification of a Saveset file contained within a Collection file failed. Reason: %1 PartitionEntryID: %2 Saveset: %3 Collection: %4 Message: %5 Method: %6 For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp Verification of a Saveset file prior to being added to a Collection file failed. Reason: %1 PartitionEntryID: %2 Saveset: %3 Message: %4 Method: %5 For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp A Collector has determined that the VerifyCollectedFiles registry key is disabled while the VerifyFilesInNewCollection registry key is enabled. VerifyFilesInNewCollection is therefore ignored. For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp Error writing to cache location. This is usually caused by lack of disk space. For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp A cache location cannot be found in the ComputerEntry table. For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp The migration request was refused because the file is too large for the secondary storage device. PartitionEntryID: %1 File: %2 Method: %3 (%4) For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp The Vault Store could not be completely deleted because the Partition with EntryId '%1' contains one or more files with a retention period (on the secondary storage device) that has not yet expired. Vault Store Name: %1 Vault Store Id: %2 The operation can be retried at any time. For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp Content Management API authentication failed - EnterpriseVault.AuthServer not available. For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp Could not get the temp file path. If this warning continues to be logged contact your support representative. For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp Archive operation cancelled because the archived file '%3' was of size 0 bytes. The item has not been archived. [Vault Store: %1] [Vault ID: %2] [Transaction ID: %4] For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp The PST migration failed because mailbox '%1' has not been provisioned. Check that the mailbox is in a provisioning group, run the provisioning task, and then try the migration again. For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp Unable to create archive because no Indexing Service is defined for computer '%1'. Use the Administration Console to do one of the following: -- Add an Indexing Service to computer '%1' -- Edit the properties of computer '%1' to specify a Default Indexing Service [Archive Name: %2] [Archive Type: %3] [Vault Store: %4] For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp An error occurred while converting the saveset into legacy saveset format. [Saveset ID: %1] [Format: %2] [ClientVersion: %3] MAPI is required to download savesets to legacy Enterprise Vault clients. Check that MAPI is installed on this server. For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp

EMC Centera Clip not found Function call: %1 Status: %2 (%3) Reason: %4 Pool Address: %5 For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp Abnormal error occurred HR Error: %1 NSF file: %2 Archive Name: %3 Vault Id: %4 Reference: %5 For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp Unspecified error. Check the event log For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp Some items could not be deleted from the NSF file. Number of items not deleted: %1 NSF file: %2 Archive Name: %3 Vault Id: %4 For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp Some items could not be moved to the target mailbox. Number of items not moved: %1 NSF file: %2 Archive Name: %3 Vault Id: %4 Domino Mailbox: %5 For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp Some items could not be converted to shortcuts. Number of items not converted: %1 NSF file: %2 Archive Name: %3 Vault Id: %4 For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp NSF Migration Report Migration status: %1 NSF file: %2 Archive Name: %3 Vault Id: %4 Retention Category: %5 Domino Mailbox: %6 More information: %7 Elapsed Migration Time: %8 (hours:minutes:seconds) For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp The NSF MigratorServer is unable to initialize the Domino or Notes runtime sytem For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp NSF Migrator Server started For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp NSF Migrator Server stopped For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp The Directory Service is unavailable. Try again later For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp NSF Migrator Server initialization failure For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp Storage Service has shutdown For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp Insufficient mailbox quota available For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp Target Domino Server mailbox cannot be opened For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp

Target Domino Server mailbox cannot be opened Mailbox:%1 For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp Did not attempt to delete the NSF file. It still has data in it NSF file: %1 For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp Failed to set the NSF file's read-only attribute NSF file: %1 For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp Failed to set the NSF file's hidden attribute NSF file: %1 For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp An error occurred while creating new entries in directory database for fingerprint catalogue instance. Following further details are available. Vault Store Group Entry Id: %1 Target SQL Server name: %2 For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp Partition rollover could not determine which partitions are served by Storage Service %2. %1 For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp Partition rollover could not read the Vault Directory %1 For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp Partition rollover could not find the next Vault Store in the result list. %1 For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp An exception has occurred in partition rollover watch thread: %1 [Internal reference %2] For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp Partition rollover could not find any ready partitions for VaultStore %2 of Storage service %1. Note All Partitions in of vaultStore %2 will be closed. Use VAC to create a new open partition or open an existing partition. For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp Partition rollover has occurred. Details: Storage Service ID:%1 Vault Store: %2 Closed Partition: %3 Opened Partition: %4 Triggering Mechanism: %5 For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp The ready partitions for VaultStore %2 of Storage service %1 are %3. For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp Partition rollover failed. Status:%1 Details: Storage Service ID:%2 Vault Store: %3 Triggering Mechanism: %4 For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp Item location cannot be updated. The requested destination folder is not within the item's archive. For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp The item's Retention Category cannot be updated. The original Retention Category prevents deletion of archived items but the new one does not. For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp Could not get the exclusive lock for fingerprint database '%1' on SQL Server '%2'. Please ensure that no other application is accessing this database. For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp Could not get the exclusive lock for fingerprint database '%1' on SQL Server '%2' even after %3 attempts. Please ensure that no other application is accessing this database. For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp Database update started for fingerprint database '%1' on SQL Server '%2'. For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp Database update completed for fingerprint database. Following details are available. Fingerprint Database name:%1 SQL Server name:%2 Old Schema Version:%3 New Schema Version: %4 For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp Fingerprint database update failed for vault store group identity - '%1'. For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp The Storage Service was stopped while waiting for an update of the fingerprint database(s) to be performed for vault store group identity '%1'. For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp The Storage Service is waiting for another Storage Service to complete an update of the Fingerprint database '%1', or waiting to get exclusive access to this database. Please ensure no applications, for example SQL Enterprise Manager or SQL Query Analyzer, are accessing this database. %2 For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp An error occurred while trying to obtain a Vault Store Group having id:%1. For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp A badly formed IPv4 IP Address string was provided to the Connectivity Test. For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp A bad IPv4 IP Address was provided to the Connectivity Test. For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp Insufficient mail file quota available For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp Target Domino Server mail file cannot be opened For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp The Vault Store is currently in Backup Mode. For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp Unable to set Vault Store Backup Mode. Reason:%1 %2: %3 Name: %4 For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp Unable to restart StorageFileWatch threads. Reason:%1 For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp Unable to restart StorageDelete threads. Reason:%1 For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp StorageFileWatch threads restarted successfully. For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp StorageDelete threads restarted successfully. For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp An error occurred whilst inserting into the Vault Store Database PartitionCache table. VaultStoreEntry: %1 PartitionEntry: %2 IdPartition: %3 Error: %4 For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp An error occurred whilst updating the Vault Store Database PartitionCache table. VaultStoreEntry: %1 PartitionEntry: %2 IdPartition: %3 Error: %4 For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp An error occurred whilst deleting from the Vault Store Database PartitionCache table. VaultStoreEntry: %1 PartitionEntry: %2 IdPartition: %3 Error: %4 For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp Target Domino Server mail file cannot be opened Mailbox:%1 For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp Did not attempt to delete the NSF file. It still has data in it NSF file: %1 For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp Failed to set the NSF file's read-only attribute NSF file: %1 For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp Failed to set the NSF file's hidden attribute NSF file: %1 For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp Successfully set Backup Mode on Vault Store. Vault Store Name: %2 Vault Store EntryID: %1 For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp Successfully set Backup Mode on all the Vault Stores in the Vault Store Group that are managed by the Storage Service on this computer. Vault Store Group Name: %2 Vault Store Group EntryID: %1 Storage Service EntryID: %3 For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp Successfully set Backup Mode on all the Vault Stores that are managed by the Storage Service on this computer. Computer Name: %2 Storage Service EntryID: %1 For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp A unique name could not be generated for the Partition Network Share. For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp An error occurred while deleting a Partition Network Share. PartitionEntry: %1 RemotePath: %2 DirectoryPath: %3 Error: %4 For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp A new Partition Network Share was created. PartitionEntry: %1 DirectoryPath: %2 RemotePath: %3 For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp The verification of Partition Network Shares failed. Info: %1 For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp Verification of a Partition Network Share failed. For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp

A new Partition Network Share was created after verification of the previous one failed. PartitionEntry: %1 DirectoryPath: %2 NewShareName: %3 OldShareName: %4 For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp The Storage Service was stopped while waiting for verification of Partition Network Shares to happen for Storage Service EntryId '%1'. For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp Due to an inconsistency the Remote Partition Root Path for this Partition was updated to the correct value. PartitionEntry: %1 DirectoryPath: %2 NewValue: %3 OldValue: %4 For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp Failed to obtain or reaffirm synchronization slot For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp SIS part validation failed. The fingerprint for the SIS part generated during validation does not match the fingerprint created when it was archived. For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp Fingerprint validation failed. The fingerprint set for the saveset generated during validation does not match the fingerprint set created when it was archived. For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp SIS part validation failed. The fingerprint for SIS Part 0 generated during validation does not match the fingerprint created when it was archived. For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp Saveset validation failed. The fingerprint set for the saveset could not be loaded. For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp The specified identifier already exists. For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp PST migration stopped because the Vault Store is currently in backup mode. Vault Store Name: %1 VaultStoreID: %2 For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp The Saveset is not in the currently-selected archive. For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp Legacy registry values are in use. Enterprise Vault has a new method of backing up Vault Stores that cannot be used until you remove this registry value. See the Administrator's Guide for information about backing up Vault Stores. The following legacy registry values were found: %1 For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp The following Vault Stores are currently in backup mode: %1 For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp Successfully cleared Backup Mode from Vault Store. Vault Store Name: %2 Vault Store EntryID: %1 For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp Successfully cleared Backup Mode from all the Vault Stores in the Vault Store Group that are managed by the Storage Service on this computer. Vault Store Group Name: %2 Vault Store Group EntryID: %1 Storage Service EntryID: %3 For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp Successfully cleared Backup Mode from all the Vault Stores that are managed by the Storage Service on this computer. Computer Name: %2 Storage Service EntryID: %1 For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp Unable to clear Vault Store Backup Mode. Reason:%1 %2: %3 Name: %4 For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp Retrieval of saveset failed. Archive Id: %1 Transaction Id: %2 Extended information: %3 Internal Ref: %4 For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp Migration has started for: %1 For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp Storage Expiry Report Vault Store Name: %1 Vault Store Id: %2 Number of vaults processed: %3 Number of vaults enabled for expiry: %4 Total number of expired items deleted: %5 Total number of items that could not be deleted: %6 Items marked with sent\received date based retention categories have been deleted: %9 Items marked with archived date based retention categories have been deleted: %10 Start Time: %7 End Time: %8 For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp Storage Expiry Report (Report Mode) Vault Store Name: %1 Vault Store Id: %2 Number of vaults processed: %3 Number of vaults enabled for expiry: %4 Total number of expired items: %5 Items marked with sent\received date based retention categories have been deleted: %8 Items marked with archived date based retention categories have been deleted: %9 Start Time: %6 End Time: %7 For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp Unable to read registry key %2. Details: %1. For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp Unable to delete registry key %2. Details: %1. For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp Registry settings for backup were migrated successfully. For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp An exception has occurred in File watch thread: %1 [Internal reference %2] For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp An exception occurred while migrating the backup registry values to directory database %1. For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp An exception occurred while validating the trigger file. For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp Unable to find the trigger file for notifying that the partition is secure. Partition name: %2. Partition path: %3 Reason: %1 For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp Error validating the %1 in the XML trigger file for notifying that the partition is secure. File path: %2 Reason: %3 For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp The StorageFileWatch process could not enumerate the partitions served by Vault Store %2, Storage Service %3. %1 For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp The StorageFileWatch process could not read the details of a partition on Vault Store %2. %1 For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp Replication is disabled for EMC centera partition '%1' on Vault Store '%2'. For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp A locking error has occurred. For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp %1 is not a valid Vault Store ID. Enter the Vault Store ID as shown in the Vault Store properties. For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp The details you provided match multiple Vault Stores. Enter the Vault Store ID as shown in the Vault Store properties. For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp Watch file partition scan will be stopped for following EMC centera partition as [%1] consecutive unreplicated clips were found. Partition Name = %2 VaultStoreEntryId = %3 For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp Watch file partition scan stopped for all the partitions on a VaultStore as it is entering the backup mode. Vault Store Name: %1 Vault Store EntryID: %2 For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp Watch file partition scan restarted for all the partitions on a VaultStore as it is exiting the backup mode. Vault Store Name: %1 Vault Store EntryID: %2 For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp An error occurred while trying to raise SIS parts secured notification. Following information is available. Error: %1 Partition Name = %2 VaultStoreEntryId = %3 For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp SIS part validation failed. The stored SIS part could not be found at the expected location. For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp SIS part validation failed. The stored SIS part size is different to the size expected. For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp SIS part appears to have been migrated successfully. For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp An error occurred while trying to submit a partition scan request. Following information is available. Error: %1 VaultStoreEntryId = %2 For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp An invalid saveset was encountered while doing watch file scan. This archive operation will be attempted to be cancelled. Following further information is available. Partition Name = %1 VaultStoreEntryId = %2 TransactionID = %3 Invalid Reason = %4 For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp An invalid SIS part was encountered while doing watch file scan. Following further information is available. Partition Name = %1 VaultStoreEntryId = %2 ParentTransactionID = %3 Invalid Reason = %4 For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp The selected Vault Store Group doesn't have a Fingerprint Catalogue database. For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp A problem was encountered while part of an item was being archived. A new copy of the part in question will be made in the vault, and the old copy will be 'blacklisted' to prevent further problems occurring. Reason = %1 ParentTransactionId = %2 Attachment Id =%3 Old SIS part Id = %4 New SIS part Id = %5 For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp Following archive could not be deleted as it contains items that are on hold, or their retention category does not allow deletions, or a compliance device retention period prevents them from being deleted. Archive Name = %1 Archive Entry Id = %2 Total items on hold = %3 For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp

Failed to delete a Partition. Partition Entry Id : %2 Vault Store Entry Id: %3 Internal references: Error : %1 Reference : %4 For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp Vault Store group has been deleted Vault Store Group Name: %1 Vault Store Group EntryId: %2 For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp Failed to access file '%2'. Reason: %1 Operation: %3 Reference: %4 For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp Failed to access file '%2'. Check the '%5' is running and that there are no errors with Source PDVFS in the Application event log. Reason: %1 Operation: %3 Reference: %4 For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp An error occurred while trying to recover from an error during archiving. The database and partition may be in an inconsistent state. For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp Secured item verification failed for one or more SIS parts of a saveset. Following further information is available. Partition Name = %2 VaultStoreEntryId = %3 Saveset TID = %4 Reason = %1 For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp The converted content is too large to process For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp No index locations were found for the archiving task to run. [Internal reference %1] For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp An error occurred while attempting to delete a SIS part from a partition. A reference to a SIS Part that has been marked as unreferenced in the Fingerprint Catalogue has been found in one of the vault stores in the vault store group. Please contact your support representative. The following information is available: %1 For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp Verification of a Sis Part file being collected failed. Reason: %1 PartitionEntryID: %2 Saveset: %3 Collection: %4 Message: %5 Method: %6 For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp Verification of a Saveset file being collected failed. Reason: %1 PartitionEntryID: %2 Saveset: %3 Collection: %4 Message: %5 Method: %6 For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp An arithmetic overflow occurred in '%1' method. Following further information is available. %2 For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp Could not start storage service for following reasons. Reason: %1 Internal Ref: %2 For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp Attachment is corrupt and cannot be extracted. For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp Attachment is encrypted and cannot be extracted. For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp The Vault Store has not been upgraded. For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp Validated the XML trigger file for notifying that the partition is secure.The details are as follows: Partition Name:%1 PartitionEntryID: %2 FilePath: %3 Vendor Name: %4 Vendor AppType: %5 Partition Secured DateTime = %6 Vendor TransactionId = %7 For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp Two or more partitions are configured to use the same location. The Storage service will not start until all partition locations are unique. Affected partitions:%1 Please contact your support representative. For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp The Enterprise Vault server is using legacy registry values that place Enterprise Vault into read-only mode. Backup mode cannot be used until you remove these registry values. Check the event log on the Enterprise Vault server. For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp A Partition's Collector run has finished. Some files were not collected because they have not been backed up. Partition Root Path: %1 Archived items: %2 Files added to collections: %3 Collections: %4 Time taken for the run [H:M:S]: %5:%6:%7 For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp A Partition's Collector/Migrator run has finished. Some files were not collected because they have not been backed up. Partition Root Path: %1 Archived items: %2 Files added to collections: %3 Collections: %4 Files migrated to secondary storage: %5 Time taken for the run [H:M:S]: %6:%7:%8 For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp Failed to extract the file from the CAB file. The file name is not in the CAB file index. For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp Could not find the sis part corresponding to input attachment identifier. For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp The database for Vault Store '%1' has a schema version of '%2', which is not the latest version. Start the Storage service that hosts the Vault Store in order to upgrade the schema version. Start the Storage service on: %3 For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp The specified archive is closed and cannot be used for archiving. Vault Id: %1 Reference: %2 For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp PST Migration started. PST file: %1 For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp Failed to compact the NSF file NSF file: %1 For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp Failed to delete the NSF file NSF file: %1 For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp The item definition table is full. For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp Two or more partitions are configured to use the same location. For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp Error adding Start attribute to indexable item For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp Error adding End attribute to indexable item For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp Error adding Location attribute to indexable item For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp Error adding Due Date attribute to indexable item For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp Error adding Date Completed attribute to indexable item For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp Error adding Status attribute to indexable item For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp AuthClient not installed locally - cannot authenticate client identity. For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp You cannot create a folder in an unstructured archive. For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp An attempt was made to move an ArchiveFolder beneath itself (hierarchy inversion) For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp An attempt was made to delete an ArchiveFolder but the folder was not empty. For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp The specified archive folder does not exist. For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp An attempt was made to delete an ArchiveFolder but the folder has outstanding journal activity associated with it. For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp An attempt was made to delete an ArchiveFolder record but the folder was not marked for as deleted. For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp An attempt was made to delete an ArchiveFolder record that still exists in an exchange mailbox. (This may be due to an erroneous call from a 3rd party application using the CM API) For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp Error adding Recurrence Pattern attribute to indexable item For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp Error adding Recurrence Type attribute to indexable item For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp Error adding Recurrence Exception attribute to indexable item For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp A new SQL index has been created to improve the performance of processing items in the Centera collection area. Index Name: %1 Table Name: %2 Database: %3 SQLServer: %4 VaultStoreEntryId:%5 For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp

You are recommended to create a new SQL index for this vault store database to improve the performance of processing items in the Centera collection area. Table Name:%1 Database: %2 SQLServer: %3 VaultStoreEntryId:%4 See %5 for further information. For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp Error adding Archive Transaction ID List attribute to indexable item For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp This command is invalid for the current EVSVR object state. For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp EVSVR stopped processing due to a STOP request. This warning can be ignored. For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp EVSVR is in a failed state and processing is being aborted. For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp An EVSVR work thread did not respond to a STOP request in the required time and will be terminated. For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp

Could not access indexable item: %1 Internal reference: %2 <br>e.g.<br> Could not access indexable item: Not enough storage is available to complete this operation. [0x8007000e] <br> Internal reference: POPR Could not contact the Indexing Service Please check the Indexing Service has been started on %2 VaultID: %4 Internal reference: %3 : %1 <br>e.g.<br> Could not contact the Indexing Service <br> Please check the Indexing Service has been started on ACMEVAULT1 <br> VaultID: 1D1D02C3867530NINE54C75F76DE8AAF51110000vault.acme.com <br> Internal reference: SGETACCP CoCreate : Access is denied. [0x80070005]<br>Index Search failed: %1 Internal reference: %2 <br>e.g.<br> Index Search failed: The remote procedure call failed. [0x800706be] <br> Internal reference: SRCI<br> Index Update failed: %1 Internal reference: %2 <br>e.g.<br> Index Update failed: Operation aborted [0x80004004]<br> Internal reference: AddItemCould not invoke Index Server Internal Reference %2 : %1 <br>For example:<br> Could not invoke Index Server <br> Internal Reference IAGH CoCreate IndexAgent : Server execution failed [0x80080005]

Could not add Indexable Item and Per-user data to Index: %1 Internal reference: %2 Additional Info: %3 <br>e.g.<br> Could not add Indexable Item and Per-user data to Index:<BR> The parameter is incorrect. [0x80070057] <BR> Internal reference: 2E413ACE1FDC9C4D883B46D36ED8397F1110000vault.acme.com<br> Additional Info: load <br>

Client request refused due to insufficient privileges. User %1 attempted to access the Vault with VaultID %2 but does not have permission(s) (%3).

Could not open indexing parameters Reason: %1 Index: %2 <br>e.g.<br> Could not open indexing parameters <br> Reason: Could not open indexing parameters <br> Index: 44REQ24Y6505DEF449DD1216C1CFE33141110000vault.acme.com

Could not set tracing level. Tracing is disabled Internal reference: %1 <br>e.g.<br> Could not set tracing level. Tracing is disabled<Br> Internal reference: CRSS A COM error occurred. %1 Internal reference: %2 <BR>e.g.<br> A COM error occurred. <br> A low level indexing operation has failed Error: Index Id: [0x80041c43] <br> Internal reference: CDELW 1RFT5427UAQ2DEF449DD1216C1CFE33141110000vault.acme.com

A low level indexing operation has failed Error: %1 Index Id: %2<br />e.g.<br />A low level indexing operation has failed <br />Error: Filter error [AV:24] <br />Index Id: 134A9F3133F55514792A0700563B161601110000acme.com/Volume:1 (Journal Archive) <br /><br />

A critical Microsoft component, oleaut32.dll, has become unregistered. Please refer to the Enterprise Vault EVAdmin.chm for further information on this known Microsoft problem. (Microsoft Knowledge Base Article - 185599)

The Indexing service had to terminate an unresponsive IndexServer process <br>Internal Reference: 15F5B236AAD771D428B8366T4ED6CC2521110000vault The index data could not be committed to disk. Possible reasons are: a) Disk space or quota has been exhausted on the index device b) Permissions do not allow the service access to the index c) The index device is not available There are %1 kilobytes available to the account %2 in index location %3 Low level indexing error: %4 AltaVista has raised an 'abort' signal, forcing the IndexServer process to terminate. A new IndexServer process will be started when required. An IndexServer could not login user: %1\%2 in the Windows NT domain Make sure that the 'Act as part of the operating system' user right has been granted to the Enterprise Vault site service account on the machine where the Indexing Service is located Index Remove failed: %1 Internal reference: %2] <br>e.g.<br> Index Remove failed: Invalid search query. [0xc0041c53]<br> Internal reference: RemoveItemFromIndex Could not get the IndexServer sequence number: %1 Internal reference: %2 <br>e.g.<br> Could not get the IndexServer sequence number: <br> The Alta Vista index is not open [0xc0041c64] <br> Internal reference: GetSequenceNumber

The AltaVista Index is full for Vault ID: 1421B28D8F4222147D54O2DA3AA60FF161110000vault.acme.com <br> No more data can be stored in this Vault. Please create and use a new Vault instead.

e.g.<br> Vault 'NY 10/04/2004_0010' has rolled-over to Vault 'NY 10/04/2004_0011' <p> Internal References: <br> Original VaultID: 110B72360A4D5DA4592CB47BD28ED23C81110000vault.acme.com <br> New VaultID : 1434D84D7102F034BA303613861677AC51110000vault.acme.com <br> ROV [490000000]

Failed to update the Vault Directory with Vault date-ranges. The Index will not be flushed to disk until this problem is resolved. <br>e.g.<br> Failed to update the Vault Directory with Vault date-ranges. The Index will not be flushed to disk until this problem is resolved. <p> Error code: Access is denied. [0x80070005] Error code: %1 Could not determine the item date range for the Vault: %2 % nError code: %1 This could lead to searches taking longer than expected.

Client request refused due to insufficient privileges. User %1 does not have permission(s) (%2) to any folder in the Vault with VaultID %3. <p>e.g.<br> Search request refused because the user does not have sufficient permissions to search any folder in the archive. User: ACMECORP\DOWDP <br> Required Permissions: Read<br> Archive: ACME Info <br> Archive Id: 129761B8KIER1BC4A920D385B67BE41C11110000acme.com Abnormal error occurred Error: %1 Reference: %2 Index: %3 Info: %4 %5 %6 <br>e.g.<br> Abnormal error occurred <br> Error: A low level indexing operation has failed<br> Reference: CAVUpdator/OAVI/o(h) <br> Index: 15EY789B40BD32C47921B837977DBB2581110000vault.acme.com <br> Info:

e.g.<br> Failed to commit Index updates to disk. <br> Reason: A low level indexing operation has failed<br> Error: Index Id: [0xc0041c43] <br> Index Id: 43TY212E2BA61EE40A0A1841221C018681110000acme.com<br> Index Path: F:\Indexes\43TY212E2BA61EE40A0A1841221C018681110000acme.com <br> Available Disk Space: 0 KB(0 KB) <br> Number of Items added: 46 <br> Number of Items deleted: 0 <br> Number of new words: 35283 <br> Additional Info: Makestable <br> Vers:1401 Mem Load:9771 (Max:1310720) KB<p>Index Server process failed Index: %1 PID: %2 Exit Code: %3 </p> <p>e.g.</p> <p>ndex Server process failed <br />Index: 1111B301E5F86D54CB5E786646BB175E91110000kvsprod/VolumeSet:512<br />PID: 7936 <br />Exit Code: 3 <br /></p>Search request failed. Reason: %1 Index Id: %2 Requestor: %3 Search Query: %4 Search Arguments: %5 <br>e.g.<br> search request failed. <br> Reason: Operation aborted [0x80004004] <br> Index Id: 1412G54341FDC9C4D883B46D36ED8397F1110000vault.acme.com (share) <br> Requestor: ACME\Dowd<br> Search Query: "subj" 40 "file extensions"<br> Search Arguments: Start: 1 Number: 10, Options:0x10000<br> Schema:0x1fdbfa Format:0 PI: CP: <br>

The index volume is not a member of the index volume set. Index Id: %1 Index Volume Id: %2 Index Volume Set Id: %3 For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp The selected index volume set or index volume is not loaded. Index Id: %1 Index Volume Set Id: %2 Search target: %3 For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp The query would have been blocked and the application set the 'Do not block query' option. For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp

The request was refused due to insufficient privileges. User: %1 Request: %2 Supplementary Info: %3 The caller must be an administrator to perform this operation. For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp The update request was rejected since the last Index Sequence Number does not match the last Index Sequence Number processed. For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp <p>Failed to add item to the index due to failure loading the item's index metadata. Reason: %1 Index Id: %2 Saveset Id: %3 Internal reference: %4 For more information, see Help and Support Center at <a href="http://evevent.veritas.com/rosetta/showevent.asp">http://evevent.veritas.com/rosetta/showevent.asp</a> </p> <p>e.g.&nbsp; Failed to add item to the index due to failure loading the item's index metadata. |Reason: No such interface supported [0x80004002] |Index Id: 213D931093CC94A429D26CADD47E332CA1110000ACME/Volume:7 (MailboxAliasName) |Saveset Id: 128412000000000~200401071308210000~0~138DA8FD60624EB693BA9F1FCC9A22C |Internal reference: XML II load |<br /></p>The index volume is full. Index Volume: %1 Sequence Number: %2 Maximum Location: %3 Number of documents: %4 File size: %5% of maximum size A new index volume has been created. For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp Request to update the index refused. The Index Sequence Number assigned to the request indicates that the request has already been actioned. Index Id: %1 Request: %2 Additional Info: %3 For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp <p>Unable to add the item to the index since it is not currently available from the Storage Service. Reason: %1 Attempt: %2 Index: %3 Saveset Id: %4 Sequence Number: %5 For more information, see Help and Support Center at <a href="http://evevent.veritas.com/rosetta/showevent.asp">http://evevent.veritas.com/rosetta/showevent.asp</a> </p><font size="1"> <p><font size="2">Unable to add the item to the index since it is not currently available from the Storage Service.</font></p> <p><font size="2">Reason: Saveset is temporarily unavailable. Try operation again later. [0x80041b03]</font></p> <p><font size="2">Attempt: 7</font></p> <p><font size="2">Index: 1R4WKFIR5S9A7D74E9344C1942C220A2B111000ACME/Volume:1 (JOURNALVAULT)</font></p> <p><font size="2">Saveset Id: 41D5A0000000000~200305102205190000~0~42025941687F4C16A058C95C64CB495</font></p> <p><font size="2">Sequence Number: 607122</font></p></font>Addition of item to index abandoned. Index: %1 Saveset Id: %2 Sequence Number: %3 All previous attempts to add the item to the index have failed. To prevent further failures the item will not be indexed. For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp Addition of offline item to index abandoned. Index: %1 Saveset Id: %2 Sequence Number: %3 First requested: %4 All previous attempts to retrieve the item from offline storage have timed out. To prevent further delays the item will not be indexed. For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp Deletion of item from index abandoned. Index: %1 Saveset Id: %2 Item Sequence Number: %3 Delete Sequence Number: %4 All previous attempts to delete the item from the index have failed. To prevent further failures the item will remain in the index. For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp Index update abandoned. Index: %1 Update started: %2 All previous attempts to process the update request have failed. To prevent further failures the update is being abandoned. For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp The index volume has been marked as failed. Index Volume: %1 Index Volume Path: %2 Reference: %3 %4 Due to repeated errors accessing the index volume it has been marked as 'failed' to prevent further errors. The index volume will remain inaccessible until it has been repaired. For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp The AltaVista dataset file is missing. For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp Starting index volume update Index Volume: %1 Index Volume Path: %2 Job Id: %3 Job Author: %4 Job Description: %5 For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp Completed index volume update Index Volume: %1 Index Volume Path: %2 Job Id: %3 Job Author: %4 Job Description: %5 Job elapsed time: %6 (hours:minutes:seconds) Processing time: %7 (hours:minutes:seconds) Number of items added: %8 Number of items additions abandoned: %9 Number of items deleted: %10 For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp Aborted index volume update Reason: %1 Aborted by: %2 Index Volume: %3 Index Volume Path: %4 Job Id: %5 Job Author: %6 Job Description: %7 Job elapsed time: %8 (hours:minutes:seconds) Processing time: %9 (hours:minutes:seconds) Number of items added: %10 Number of items additions abandoned: %11 Number of items deleted: %12 For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp

The index contains too many volume sets for a federated search. Index: %1 Number of Volumes: %2 Maximum number of volumes: %3 For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp The search application requested too many results. Index: %1 Requested number of results: %2 Maximum number of results: %3 For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp Index is currently disabled. Index: %1 For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp Convert to unicode information. %1 For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp

Timed out waiting for an IndexServer to stop. Index: %1 PID: %2 For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp Error writing information to index missing log for Index Volume %1 For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp Index volume update in progress Index Volume: %1 Percentage completed: %2 Estimated time of completion: %3 Index Volume Path: %4 Job Id: %5 Job Author: %6 Job Description: %7 Job elapsed time: %8 (hours:minutes:seconds) Processing time: %9 (hours:minutes:seconds) Number of items added: %10 Number of items additions abandoned: %11 Number of items deleted: %12 For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp

The count of failed items in the log file does not match the number recorded in the directory database. The Indexing service will use the count that is in the log file to update the database. Run the IndexCheck tool against this index volume to ensure that the log file is up to date. Index Volume: %1 Index Volume Path: %2 Log File: IndexMissiing.log Number of failed items in the log file: %3 Number of failed items recorded in the database: %4 For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp There are no more items to read from the failed items log For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp The failed items log appears to be empty, or cannot be read. There are no items to repair For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp The sequence number read from the failed items log does not correspond to the Saveset ID specified in the file. The item will not be repaired. Index Volume: %1 Sequence Number: %2 Expected Saveset ID: %3 Actual Saveset ID: %4 For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp Index volume is full. Cannot index any more repaired items to this volume. Index Volume: %1 For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp Update of indexed item abandoned. Index: %1 Saveset Id: %2 Item Sequence Number: %3 %Update Sequence Number: %4 All previous attempts to update the indexed item have failed. No further attempts will be made to update the item. For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp Could not update indexed item Index Id: %1 Item Id: %2 %Additional Info: %3 For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp Failed to commit Index updates to disk. Reason: %1 Index Id: %2 Index Path: %3 Available Disk Space: %4 Number of Items added: %5 Number of Items deleted: %6 Number of Items updated: %7 Number of new words: %8 Additional Info: %9 %10 For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp Index volume update in progress Index Volume: %1 Percentage completed: %2 Estimated time of completion: %3 Index Volume Path: %4 Job Id: %5 Job Author: %6 Job Description: %7 Job elapsed time: %8 (hours:minutes:seconds) Processing time: %9 (hours:minutes:seconds) Number of items added: %10 Number of items additions abandoned: %11 Number of items deleted: %12 Number of items updated: %13 For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp Aborted index volume update Reason: %1 Aborted by: %2 Index Volume: %3 Index Volume Path: %4 Job Id: %5 Job Author: %6 Job Description: %7 Job elapsed time: %8 (hours:minutes:seconds) Processing time: %9 (hours:minutes:seconds) Number of items added: %10 Number of items additions abandoned: %11 Number of items deleted: %12 Number of items updated: %13 For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp Completed index volume update Index Volume: %1 Index Volume Path: %2 Job Id: %3 Job Author: %4 Job Description: %5 Job elapsed time: %6 (hours:minutes:seconds) Processing time: %7 (hours:minutes:seconds) Number of items added: %8 Number of items additions abandoned: %9 Number of items deleted: %10 Number of items updated: %11 For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp Disabling additions, deletions, and updates because the index location is in backup mode. Index Location: %1 Status: %2 For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp Enabling additions, deletions, and updates because the index location is no longer in backup mode. Index Location: %1 Status: %2 For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp Disabling additions, deletions, and updates to the following index locations because they are in backup mode: %1 Status: %2 For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp None of the index locations is in backup mode For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp The following index locations are in backup mode: %1 For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp Index volume is full. Cannot add new items or update existing items in this volume. Index Volume: %1 For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp There are no index locations. No indexing can take place until an index location has been created. For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp Could not find item in index Index Id: %1 Item Id: %2 %Additional Info: %3 For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp

Failed to obtain token sids. Error: %1 Contact your Support Representative giving full details of your configuration and the actions leading up to this error.

Failed to register the handler for the Vault Directory Service service control requests, error code '%1'. The Vault Directory Service will not be started. This message is generated when registering the Vault Directory Service as an NT Service, a failure occurred when registering the function to handle service control requests.

A Vault Directory Service Interface pointer is in use when all pointers are being freed. During system clean up an attempt was made to free all the Vault Directory Service Interface Pointers. One was found that was marked as still being used by a thread. All pointers at this point should be marked as unused.

Failed to create a Directory Vault object, reason: %1 <br />e.g. Failed to create a Directory Vault object, reason: Exception occurred. [0x80020009]

The Vault Directory Service failed to update the Vault Directory Database as the number of attribute types did not match the number of attribute values. The Vault Directory Service failed to update the Enterprise Vault Directory Database because either the attribute type or attribute value strings could not be parsed.

An attempt was made to update the primary key of a database entry. This operation is not allowed in the Vault Directory Database. The key was %1.

Failed to initialize the windows sockets system. Reason: The version of Windows Sockets support requested is not provided by this particular Windows Sockets implementation.

Failed to initialize the windows sockets system. Reason: The limit on the number of tasks supported by the Windows Sockets implementation has been reached.

Failed to clean up the windows sockets system. Reason: A blocking Windows Sockets call is in progress, or the service provider is still processing a callback function.

Failed to get the host '%1' using windows sockets. Reason: A blocking Windows Sockets call is in progress, or the service provider is still processing a callback function.

Failed to get the host '%1' using windows sockets. Reason: A blocking Windows Socket call was canceled through WSACancelBlockingCall.

The EnterpriseVault.DirectoryService object reported an error. %1 <br>e.g.<br> The EnterpriseVault.DirectoryService object reported an error.<br> Failed to create Vault Database Pool Connection. The EnterpriseVault.DirectoryVault object reported an error. %1 <br>e.g.<br> The EnterpriseVault.DirectoryVault object reported an error. <br> A call to the system function SafeArrayGetElement() failed with<br> The parameter is incorrect.<br> Internal reference: GAV<br>

The registry key, HKLM\SOFTWARE\Microsoft\MSSQLServer\Setup was not available. If it does exist then ensure it is a string value. If it does not exist then check your SQL Server installation. Failed to create the Vault Directory Database. Check the following: 1. Check the SQL Account and password are correct. 2. There is sufficient disk space on the specified drive. 3. The Enterprise Vault Directory Service is running. 4. ODBC is installed

Failed to set the password. Check the following: 1. The Enterprise Vault Directory Service is running. 2. The "EnterpriseVaultDirectory" ODBC System DSN exists. 3. SQL Server is available.

Failed to gather information from the SQL Database Server. Check the following: 1. The Enterprise Vault Directory Service is running. 2 The "EnterpriseVaultDirectory" ODBC System DSN exists. 3. Check the SQL Account and password are correct. Failed to determine whether the Vault Directory Database is empty. The database must be empty before it can be deleted. Check the following: 1. The Enterprise Vault Directory Service is running. 2. The "EnterpriseVaultDirectory" ODBC System DSN exists. 3. Check the SQL Account and password are correct.

The Directory Service cannot be started until the Vault Configuration Program has been run. On the first page of the Vault Configuration Program choose the Update Configuration option The 'Search All Vaults' GroupDomain and GroupName values do not specify an NT global group. %1\%2 Search All Vaults will be disabled until this is corrected.

Failed to populate the Vault Site Account token cache. Error: %1 Contact your Support Representative giving full details of your configuration and the actions leading up to this error.

Failed to determine if (%2) is a member of the local Administrators group. Error: %1 Contact your Support Representative giving full details of your configuration and the actions leading up to this error. Failed to lookup group Sids for user (%2\\%3). Error: %1 Contact your Support Representative giving full details of your configuration and the actions leading up to this error. Failed to lookup group Sids for user (Sid specified). Error: %1 Contact your Support Representative giving full details of your configuration and the actions leading up to this error. Failed to set security blanket for IDirectoryAdmin interface. Error: %1 Contact your Support Representative giving full details of your configuration and the actions leading up to this error. A call to the system function SafeArrayRedim() failed with %1 Internal reference: %2 Contact your Support Representative giving full details of your configuration and the actions leading up to this error.

The Vault Store %1 cannot be deleted because a Journaling Service is using one of the vaults. Change the Journaling Service to use another Vault from a different Vault Store.

The Vault Store %1 cannot be deleted because a public folder is using one of the archives. Change the public folder to use an archive from a different Vault Store. The Vault Store %1 cannot be deleted because a public folder auto-enabler is using it. Change the public folder auto-enabler to use another Vault Store. Vault Store '%1' cannot be deleted because it contains archives that are associated with journal mailboxes. Change the Journal Mailbox target to use an archive from a different Vault Store. The archive %1 cannot be deleted because a Journal Mailbox target is using it. Change the Journal Mailbox target to use a another archive.

The archive %1 cannot be deleted because a File Server Volume is using it. You must delete the volume from Enterprise Vault before you can delete this archive. Vault Store '%1' cannot be deleted because it contains archives that are associated with file server volumes. You must delete these volumes from Enterprise Vault before you can delete this Vault Store. The Vault Store %1 cannot be deleted because a SharePoint Server target is using it. Change the SharePoint Server target to use a different Vault Store. Vault Store '%1' cannot be deleted because it contains archives that are associated with SharePoint Site Collections. You must delete the Site Collections from Enterprise Vault before you can delete the Vault Store.

The archive '%1' cannot be deleted because a SharePoint Site Collection is using it. You must delete the Site Collection from Enterprise Vault before you can delete this archive. For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp The Directory Service is waiting for another Directory Service to complete an update of the EnterpriseVaultDirectory database, or waiting to get exclusive access to the EnterpriseVaultDirectory database. Please ensure no applications, for example SQL Enterprise Manager or SQL Query Analyzer, are accessing the EnterpriseVaultDirectory database. %1 For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp The Directory Service was stopped while waiting for an update of the EnterpriseVaultDirectory database to be performed. For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp Failed to reset the EnterpriseVaultDirectory database into multi user access mode. Use a SQL utility, such as Enterprise Manager, to set unrestricted access. For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp Vault Store '%1' cannot be deleted because it is associated with an Organizational Unit. You must assign a different Vault Store to the Orgnaizational Unit before you can delete the Vault Store. For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp The DirectoryEntry table in the EnterpriseVaultDirectory database does not contain one record. For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp The Directory Service has started the automatic upgrade of the EnterpriseVaultDirectory Database. The Directory Service will become fully operational when the upgrade is complete. For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp The Directory Service has completed the automatic upgrade of the EnterpriseVaultDirectory Database. For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp The archive '%1' cannot be deleted because a Lotus Domino Server target is using it. Change the Lotus Domino Server target to use another archive. For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp Vault Store '%1' cannot be deleted because it contains archives that are associated with Lotus Domino Server targets. Change the Lotus Domino Server target to use an archive from a different Vault Store. For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp The upgrade from Services to Tasks is flagged as incomplete, this may mean that the system may not be providing the same function as prior to upgrade. Check the current configuration and logs, once any issues have been resolved re-run the configuration wizard to complete the upgrade For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp The archive '%1' cannot be deleted because a Domino Journal Mailbox target is using it. Change the Domino Journal Mailbox target to use another archive. For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp Vault Store '%1' cannot be deleted because it contains archives that are associated with Domino Journal Mailbox targets. Change the Domino Journal Mailbox target to use an archive from a different Vault Store. For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp An error occurred attempting to perform a security check. Reason: %1 %2 For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp Vault Store '%1' cannot be deleted because it is associated with an Exchange Server. You must assign a different Vault Store to the Exchange Server before you can delete the Vault Store. For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp Vault Store '%1' cannot be deleted because it is associated with an Exchange Provisioning Group. You must assign a different Vault Store to the Exchange Provisioning Group before you can delete the Vault Store. For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp Failed to download the Authorization Store from the directory database. Because of this you can use the Administration Console only from the Vault Service account. For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp Error launching Monitoring Config Utility. Error code: '%1' For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp The Directory Service is running on Windows 2000 and the Windows 2000 Authorization Manager Runtime is not installed. Role Based Administration will not be available until the Windows 2000 Authorization Manager Runtime component is installed. Until then, only users running under the Vault Service Account will be able to administer Enterprise Vault. For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp Vault Store '%1' cannot be deleted because it is associated with a Domino Server. You must assign a different Vault Store to the Domino Server before you can delete the Vault Store. For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp Vault Store '%1' cannot be deleted because it is associated with a Domino Provisioning Group. You must assign a different Vault Store to the Domino Provisioning Group before you can delete the Vault Store. For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp The Enterprise Vault Domino Server '%1' could not be contacted. It has been removed from the list of active servers for domain '%s2'. Ensure that this server can be reached over the network and is operating correctly. The server will be added to the active list shortly after connectivity is restored, or when the Domino server is restarted. If necessary you can increase the connection failure limit by setting the EVDomSvrMaxFailures registry value. See the documentation for further details. For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp Error launching EvAzUtil utility in order to upgrade the roles-based administration database. Error code: '%1' For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp Failed to initialize the roles-based administration database. Error code: '%1' For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp Failed to upgrade the roles-based administration database. Microsoft.Interop.Security.AzRoles.dll (version 1.0.0.0) is not registered on this machine. This file is distributed by Microsoft as part of the Windows 2000 Authorization Manager Runtime. For registration instructions, see the RUNTIME_REQUIREMENTS.txt file. For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp The data is not valid cipher text. For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp Denied access to use the encryption service. For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp Data decryption has failed. Caller: %1 Cipher text: %2 For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp Attempt made to access the KeyStore table in the Vault Directory Database. Caller: %1 For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp Enterprise Vault could not initialize the Lotus Notes runtime. Users will not be able to access their Domino archives until this problem is resolved. Ensure that the Notes client is installed on this computer and restart the Directory Service. For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp Enterprise Vault has checked the following third-party registry setting and found it does not match the third-party's recommendation. Reference : %1 Key : %2 Value Name : %3 Found 1/0 : %4 Value : %5 To achieve best performance from Enterprise Vault, consider setting this value in accordance with the recommendations. For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp The connection to SQL Server could not be established. The connection will be tried repeatedly until the Directory Service is stopped. SQL Server : %1 For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp Error launching FSAReporting Config Utility. Error code: '%1' For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp The Record in the database is not found. For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp The specified archive folder already exists. For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp The archive %1 has been moved and cannot be deleted because it is currently registered as being in use. All client applications must have unregistered their interest with this archive before it can be deleted. For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp

Vault Store '%1' cannot be deleted because it contains archives that have been moved and are currently registered as being in use. All client applications must have unregistered their interest with these archives before you can delete the Vault Store. For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp

The Database Component %1 failed to successfully complete Update <br>e.g.<br> The Database Component ArchivePoint failed to successfully complete Update

The function %1 could not create an ADO Connection to the Vault Database '%2' because this context already has an active connection. This warning is generated if the client application attempts to open an ADO connection when one already exists.

An error was detected while accessing the Vault Database '%2' (Internal reference: %3), error code <%1>. SQL Command: %4 <br>e.g.<br> An error was detected while accessing the Vault Database 'EVSales' (Internal reference: ADODataAccess.cpp (CADODataAccess::AddRecord) [lines {336,337}] built Jul 7 11:45:12 2004), error code <0x80040e14>.<br> SQL Command:<br> INSERT INTO Saveset (ArchivePointIdentity,ArchivedDate,IdChecksumHigh,IdChecksumLow,IdDateTime,IdPartition,IdTransaction,IdUniqueNo,IndexSeqNo,ItemSize,RetentionCategoryIdentity,VaultIdentity ) VALUES ( 51,GETDATE(),1922000,0,CONVERT(datetime,'20030827 19:54:37:000',121),6,'30294952-1791-417D-BDE6-290BB3283590',0,238849,26,4,58) Could not close an ADO Connection as it had already been closed. This warning is generated if the client application attempts to close an ADO connection when it has already been closed. Could not create an ADO Command for this context as it already exists. This warning is generated when the client application attempts to Create Command when the object already has a command.

Could not create an ADO Recordset for this context because it already exists. This warning is generated if the client application attempts to open an ADO Recordset when one already exists.

An error was detected while accessing the Vault Database '%2' (Internal reference: %8): Description: %1 SQL Command: %9 Additional Microsoft supplied information: Source: %3 Number: %4 SQL State: %5 Native Error: %6 HRESULT %7 <br>e.g.<br> An error was detected while accessing the Vault Database 'EVTargetedVS' (Internal reference: BT3): <br> Description: <br> [Microsoft][ODBC SQL Server Driver][DBNETLIB]ConnectionWrite (send()). <br> SQL Command: N/A An error was detected while accessing the Vault Database '%2' (Internal reference: %7): Description: %1 SQL Command: %8 Additional Microsoft supplied information: Source: %3 Number: %4 SQL State: %5 Native Error: %6 <br>e.g.<br> An error was detected while accessing the Vault Database 'EVStore1' (Internal reference: ADODataAccess.cpp (CADODataAccess::ExecuteSQLCommand) [lines {1085,1087,1090,1132,1133,1148}] built Dec 9 17:50:56 2003): Description: [Microsoft][ODBC SQL Server Driver][SQL Server]Could not allocate space for object 'JournalArchive' in database 'EVStore1' because the 'PRIMARY' filegroup is full.

The SQL database server detected a deadlock while accessing the Vault Database '%2' Description: %1 Additional Microsoft supplied information: Source: %3 Number: %4 SQL State: %5 Native Error: %6 HRESULT %7 SQL Command: %8

The SQL Server rejected the database command. If a timeout or deadlock occurred, then the command will automatically be resubmitted and therefore no action is required. %1

The Update procedure failed because the table '%1' did not exist. Please restore a backup of the '%2' database and run the Update Procedure again.

e.g.<br> The SQL database server for EVTargetedVS is not available: Check that the SQL Server is valid and is running <br> Internal reference(BT3) Description: <br> [Microsoft][ODBC SQL Server Driver][DBNETLIB]General network error. Check your network documentation. <br> Additional Microsoft supplied information: <br> Source: Microsoft OLE DB Provider for ODBC Drivers Number: 0x8004d008 SQL State: 08S01 Native Error: 00000011 HRESULT 0x8004d008 %10: ADO Pool: Pool Statistics: Number of pool connections: %1 Number of requests: %2 Number of connection used: %3 Number of requests delayed: %4 Maximum retry: %5 Percentage of requests delayed: %6 Total waiting time: %7 (millisecond) Average waiting time for requests delayed: %8 (millisecond) Average waiting time for all requests: %9 (millisecond)

The connection '%1' was lost and has been reconnected (try: %2) <br>e.g.<br> he connection 'EVTargetedVS' was lost and has been reconnected (try: 1)

e.g.<br> An error was detected while accessing the Vault Database 'EnterpriseVaultDirectory'. If multiple instances of SQL Server exist ensure the correct instance was specified (Internal reference: CC1): <br> Description: [Microsoft][ODBC SQL Server Driver][Shared Memory]SQL Server does not exist or access denied.<br> SQL Command: N/A <br> Additional Microsoft supplied information:<br> Source: Microsoft OLE DB Provider for ODBC Drivers<br> Number: 0x80004005 <br> SQL State: 08001 <br> Native Error: 00000017 <br> HRESULT 0xc0043433<br> The connection '%1' was lost and the system is waiting to reconnect (Thread Id: %2) For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp

An exception has occurred. [Internal reference %1] <br>e.g.<br> An exception has occurred.<br> [Internal reference CServiceModule/DIS/e1]<br>

A failure occurred while creating the service main thread. This may be due to low system resources please close some applications and try again

The slave process for the SPS server named: %1 is not responding and will NOT be restarted as it has exceeded %2 restarts in %3 minutes

The slave process for the SPS server named: %1 has requested a restart but will NOT be restarted as it has exceeded %2 restarts in %3 minutes

The SPS service has been configured with an invalid name, "%1". The name should be of the form "EV_[type]_[guid]" where 'type' is S and 'guid' is 48 characters max; for example, EV_S_1234ABCD

The SPS workspace: %2 cannot be processed as the following error occurred while synchronizing Vault directory information with the workspace. %1 The SPS workspace: %1 cannot be processed by the SPS archiving service for: %2 as it was enabled in a different vault site to that of the SPS server. Workspace Site Id: %3 SPS Server Site Id: %4 Failed to initialize the SPS server lister object for the SPS server named %1 <br>e.g.<br> Detail: Failed to initialize the SPS server lister object for the SPS<br> Server named TNESB9252 The following folders have exactly the same Vault properties: (a) %1 (b) %2 Possible causes (and their outcome) of this problem: 1) Folder (a) is a copy of (b). A new Vault will be created for the folder (a) 2) Folder (a) has been renamed and a new folder (b) created with the original pathname. The original Vault for folder (a) will no longer have its permissions automatically synchronized and items in this folder may not be available to all its subscribers. A new Vault will be created for both folders (a) and (b).

There is no valid license key installed. The SPS Archiving Service for %1 will not start until you install a license key. See the Administrator Help for information on license keys Your Pilot license has expired. The SPS Archiving Service for %1 will not run until you install a new license key. See the Administrator Help for information on license keys

The user: %1 permissions could not be synchronized from the folder: %2 to its corresponding vault object as the user could not be looked up

The SPS pruning server for: %2 has become unavailable, no further items will be pruned during this run of the archive service. [Internal reference %1] The following item could not be archived due to a communication failure: Name: %1 Folder: %2 Another attempt to archive this item will be made when the SPS Archiving Server next processes this folder.

The SPS workspace: %1 cannot be processed because the Vault Service Account is not a coordinator. Modify the workspace security settings and add the Vault Service Account as a coordinator. The SPS service cannot start because the required version of MAPI is missing or incorrectly configured on the Enterprise Vault server: To resolve the problem: 1. Stop all Enterprise Vault services and processes that are using MAPI. 2. Ensure that a version of MAPI supplied with Microsoft Outlook 2003 or later is installed and correctly configured on the Enterprise Vault server. 3. Restart the Enterprise Vault services. If the problem persists, see the "Troubleshooting" section of the Enterprise Vault Administration help file for guidelines on how to proceed. For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp The Enterprise Vault SPS Archive service is no longer supported. For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp The Enterprise Vault SPS Pruning Service is no longer supported. For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp

Failed to write a placeholder file File Name: %1 <br>e.g.<br> Failed to write a placeholder file File Name: i:\shared\newkit\Ie5\Branding.cab Invalid argument passed to method Argument: %1 <br>e.g.<br> Invalid argument passed to method <br> Argument: CPlaceholderSvr::MakeFileAPlaceholder modifiedDate is invalid!

Error deleting Vault item file name: %2 Error %1 <br>e.g.<br> Error deleting Vault item, file name: E:\ACME\DATA\STATICS\WHEEL.JPG Error Index Server is busy compacting and cannot handle any update requests [0x80041c07]

The Placeholder Service is configured to run under the Local System account. It should be configured to run under the Vault Service Account.

Downloaded file is not the expected size: Url: %1, Content length: %2 bytes File: %3, Size: %4 bytes <br>e.g.<br> http://uk01.lfc.local/EnterpriseVault/download.asp?VaultID=120B6E2C99D16664C8DD661D2A36CA6FB1110000uk01.lfc.local&SavesetId=199000000000000~200305300846020000~0~A95EFEA3F9274A10BFE41B9FBC56BB3&Request=NativeItem&EVHeaders=1, Content length: 106406912 bytes File: \\?\E:\LARGE_FILES\CENTERA TEST\EVPS_7100_3152_200552011371.tmp, Size: 104857600 bytes The wrong version (%1) of evfsf.sys is installed. Version %2 is required. For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp Files archived with delete on delete and/or delete on recall policy flag as set will be deleted from archive when placeholder is deleted/recalled respectively. This may result in data loss. For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp Failed to read the site default WebApp Url. For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp Enterprise Vault has disabled pass-through recall because the cache cleanup thread failed to start. Error: %1 For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp Failed to created for pass-through recall request threads. For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp Failed to determine whether to delete an archived file following the deletion of its placeholder. The archived item will not be deleted. For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp Failed to update the "Delete archived file when placeholder is deleted" cache. The archived item will not be deleted when its placeholder is deleted. For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp Updated the "Delete archived file when placeholder is deleted" cache with information from the volume or folder policy. For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp Failed to create the thread for updating the "Delete archived file when placeholder is deleted" cache. The archived item will not be deleted when its placeholder is deleted. For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp The thread for updating the "Delete archived file when placeholder is deleted" cache failed. The archived item will not be deleted when its placeholder is deleted. For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp Error occured while computing hash, Error: (%1), File: (%2). For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp

Cannot set service stop event For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp

Cannot create service stop event For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp Computer not found in Active Directory For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp Active Directory search error: %1 For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp Cannot get object from Active Directory: %1 For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp Cannot get computer name. Error: %1 For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp It took %1 milliseconds to scan %2 For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp Cannot load string resource '%2'. Error: %1 For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp Cannot get registry entry for '%2'. Error: %1 For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp Cannot open registry key '%2'. Error: %1 For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp

Data collection parameters mismatch. This agent's parameters are DAYSOLD=%2, MBLARGE=%1. Data collection repository's parameters are DAYSOLD=%3, MBLARGE=%4. For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp Error in GetDiskFreeSpace: %1 For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp Error in GetDiskFreeSpaceEx: %1 For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp Error in GetVolumeInformation: %1 For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp Cannot get IQuotaAdvisor for server '%2'. Error: %1 For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp Cannot get quotas. Error: %1 For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp Cannot get quota count. Error: %1 For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp Cannot convert date to system time. Error: %1 For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp

Error getting server information: %1 For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp Cannot open data source connection. Error: %1 For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp Allocating socket failed. Error: %1 For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp Unable to get the host name. Error: %1 For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp Connecting to Data Server failed. Error: %1 For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp Sending data to the server failed. Error: %1 For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp Failed to write data to XML file. Error: %1 For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp

Scan failed on: %2. Error %1 For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp

Cannot save Drive Usage. Error: %1 For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp Cannot save SID Usage. Error: %1 For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp Cannot save File Type Usage. Error: %1 For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp Cannot save Real Time Data. Error: %1 For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp Cannot save User Data. Error: %1 For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp Cannot save data. Error: %1 For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp Active Directory type not supported: %1 For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp Failed while receiving data from the server. Error: %1 For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp Invalid type for item %2: %1 For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp WSAStartup failed. Error: %1 For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp Received incomplete request for user attributes. For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp Malformed XML in user attribute request. For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp User information buffer capacity exceeded. Too many users or attributes. For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp Invalid schedule start time for server %1, drive %2: %3. For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp

Unable to verify license key. Please contact your distributor. For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp Unable to verify Managed Server license key. Contact your distributor to obtain a Managed Server license key. For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp Error in remote shell code: %1 For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp Error saving agent settings: %1 For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp Error loading agent settings: %1 For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp Error saving agent settings: %1 For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp Property '%1' of user %2 is missing. You might have Active Directory access problems. For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp

Error getting path for share %1: %2 For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp Error getting configuration from FSAReporting web server: %1 For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp It took %1 milliseconds to format and save data of %2 For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp Error obtaining archive information of the drive %2: %1 For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp The following files had at least one invalid date: %1 The date on the file has not been changed. In the FSA Reporting database, Enterprise Vault has used the most appropriate of the following dates for the file: %t01-Jan-1753 %t31-Dec-9999 For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp

Started sending metadata for %1 to server. Server name %2. For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp Sending metadata for %1 to server completed. Server name %2. For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp Sending metadata to server failed for %1. Server name %2. For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp Started sending scanned data for %1 to server. Server name %2. For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp Sending scanned data for %1 to server completed. Server name %2. For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp Sending scanned data to server failed for %1. Server name %2. For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp Started getting archive information for \\%1\%2. For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp Completed getting archive information for \\%1\%2. For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp Failed to get archive information for \\%1\%2. For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp Archive information for reporting object : \\%1\%2 is empty. This could be either because of no data archived from this drive or there is an error while getting the archive information. For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp Scan for %1 is in progress. Number of files scanned = %2. For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp Started getting archive point information for \\%1\%2. For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp Completed getting archive point information for \\%1\%2. For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp The FSAReportingService process will be shut down because there is insufficient disk space on drive %1. Delete any unwanted files from the drive and then restart the process as follows. On file servers on which the FSA Agent is installed, restart the Enterprise Vault File Collector Service. Otherwise, restart the Enterprise Vault Admin Service on the Enterprise Vault server. For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp Failed to get archive point information for \\%1\%2. For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp

FSA Reporting cannot work on this file server. The version of Enterprise Vault that is on the Enterprise Vault server is older than the version of the FSA Agent that is on this file server. Upgrade the Enterprise Vault server to a compatible version. For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp Failed to get server information for server %1, target volume %2 For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp Failed to get path for target volume %1, server %2 For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp Failed to create entry in the FSA Reporting database for target volume %1, server %2 For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp FSA Reporting scan cancelled while waiting for archive point information for server %1, target volume %2 For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp Error occurred while waiting for archive point information. Error %3, server %1, target volume %2 For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp Failed to scan real-time data for server %1, target volume %2 error %3 For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp FSA Reporting scan cancelled while scanning drive %1, server %2 For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp Failed to scan drive %1, server %2 For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp Failed to create metadata file for target volume %1, server %2 For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp Failed to create scan data file for target volume %1, server %2 For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp Failed to write the XML header to the scan data file for target volume %1, server %2 For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp Failed to write the XML footer to the scan data file for target volume %1, server %2 For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp Failed to clear previous scanned data while scanning target volume %1, server %2 For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp Scan failed for target error %1, volume %2 For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp FSA Reporting scan cancelled after scanning target volume %1, server %2 For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp Error occurred while waiting for the archive thread to complete. Error %1, target volume %2, server %3 For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp Error %1 occurred while saving scanned data for target volume %2, server %3 For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp Failed to write metadata for target volume %1, server %2 For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp Failed to queue data for bulk upload for target volume %1, servername %2 For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp Started bulk upload of data for target volume %1, server %2 For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp Completed bulk upload of data for target volume %1, server %2 For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp Failed to get schedule for local server For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp Failed to stop scan for localhost For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp Failed to obtain DNS name associated with localhost during configuration changed For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp Failed to set the configuration parameters For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp TimerProc scan object count greater than total number of reporting objects for server %1 drive %2 For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp TimerProc configuration change is pending for server %1 drive %2 For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp ScanThread failed to start scanning for server %1 For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp Failed to get volume local path for volume %1 on server %2 For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp Started bulk upload of data for target volume %1, server %2 For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp Completed bulk upload of data for target volume %1, server %2 For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp File %1 created to store scan data for target volume %2, server %3 For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp File %1 created to store user data for target volume %2, server %3 For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp File %1 created to store hierarchy information for target volume %2, server %3 For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp Failed to open the registry key 'Reporting' at 'HKEY_LOCAL_MACHINE \Software\KVS\Enterprise Vault\FSA'. FSAReportingService.exe will stop. FSA Reporting cannot scan this computer. For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp The send of hierarchy data to the Enterprise Vault server failed for volume %1. File server %2. For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp The Enterprise Vault File Blocking service has started. For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp The Enterprise Vault File Blocking service has stopped. For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp

GetUserName API failed. Reason: %1 For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp Failed to get user SID for user %2. Reason: %1 For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp Failed to send SNMP trap, check that SNMP service is installed and running. SNMP notification not sent For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp

Error reading from MailSlot For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp

Failed to send email with following details: To:%1 From:%2 Subject:%3 Reason:%4 For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp Failed to send email, unknown exception For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp Failed to quarantine file %2 to location %3. Reason: %1 For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp Could not read Exchange Server and Exchange Server user name from registry. No email notification sent. For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp Could not update the local registry cache with file blocking targets and registry information. Reason:%1 For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp Could not update the local registry cache with file blocking targets and registry information. Unknown exception For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp Successfully updated the local registry cache with file blocking targets and registry information. For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp Error moving file %2 to centralized quarantine location %3. Error code: %1. For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp Error Creating folder %1 at centralized quarantine location %2. Error code: %1. For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp EVSVR has detected a zero byte file. For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp A Centera Clip could not be found. For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp EVSVR has detected an ERROR_PATH_NOT_FOUND error and has verified that this error is not due to a device error. The path is not found. For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp EVSVR has detected that the RefCount of a SISPart is wrong. For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp EVSVR has detected a SISPart with a zero RefCount. For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp EVSVR has deleted a SISPart with a zero RefCount. For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp Failed to upgrade slot to Full Sync status For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp Enterprise Vault could not migrate an item from a PST to an archive. Check the migration report once the migration has completed. PST: %1 Subject: %2 Folder: %3 Archive Name: %4 Archive ID: %5 Error: %6 For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp The version of Saveset is not supported. For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp A Clip missing from the Primary Centera exists on the Replica Centera. For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp DXL to EVNotestream format conversion failed. For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp The EVSVR initial operation checks failed. No processing was done. Refer to the EVSVR log file for more information. For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp There was an error verifying a Partition Network Share. Error: %1 Details of the last partition that was processed: VaultStore: %2 Partition: %3 Partition Root Path: %4 Secondary Storage Location: %5 For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp EVSVR has found that a cached copy of a missing file still exists. For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp

A program fault has raised an exception.\n\nException: {0}\nDiagnostic: {1}\nType: {2}\nReference: {3}\n\nCommand Line: {4}\nApplication Domain: {5}\nProcess Id: {6}\nThread Id: {7}\nStack Trace: {8}

{0} - Process failed.\n\nThe process has failed abnormally and will not be restarted since it has exceeded its restart count. The process can be restarted by pausing and continuing the Server Manager Service.

{0} - Process shutdown started.\n\nThe process managing this process has terminated leaving this process in an unmanageable state. The process is stopping automatically.The file server process for {0} has shutdown.\n\nThere is no valid license key installed.\n\nSee the Administrator Help for information on license keysAn item references an unknown Retention Category Identity. The site default Retention Category will be used instead.\n\nItem: {0}\nRetention Category Identity: {1:d}\nDefault Retention Category: {2}Unable to access the Directory Service on {0}.\n\nCheck that the Directory Service is running. The process will automatically continue normal operation as soon as the Directory Service becomes available.

The file server volume {0} has no Archive points associated.\n\n No items will be archived for this volume.\n\nSee the Administrator Help for information on configuring file server volume archive points.The Archive with id: {0} associated with the Archive Point: {1} is full.\n\n No more items will be stored in this archive\n\nSee the Administrator Help for more information.The Archive Point information for folder: {0} could not be written due to the following error: {1}.\n\n This folder and its subfolders will be excluded from archiving\n\nSee the Administrator Help for more information.The Archive Point information for folder: {0} could not be written as access was denied.\n\nThis folder and its subfolders will be excluded from archiving\n\nSee the Administrator Help for more information.The folder attributes for the folder: {0} could not be accessed due to the following error: {1}.\n\n This folder and its subfolders will be excluded from archiving\n\nSee the Administrator Help for more information.

The folder attributes for the folder: {0} could not be accessed as access was denied.\n\nThis folder and its subfolders will be excluded from archiving\n\nSee the Administrator Help for more information. <BR>E.G.<BR> The folder attributes for the folder: \\users\e$\vol5\DOWDEP\Car\ could not be accessed as access was denied. This folder and its subfolders will be excluded from archiving See the Administrator Help for more information. The Vault Service Account does not have write access to the volume share: {0} or the volume is unavailable, no items for this volume will be processed\n\nSee the Administrator Help for more information.

The number of items pending indexing has grown above the threshold limit. Archiving for file server {0} will pause for 1 minute to allow the backlog to clear.

e.g.<br> There are 5000 savesets that have not yet been backed up or replicated for Vault Store 'Default'. Review your procedures and make any changes needed to ensure that backups happen in a timely fashion. If you are using an EMC Centera, check the size of the Centera replication queue.

The SQL database for Vault Store '{0}' has not been backed up for {1} days. The information in this database is at risk until the database has been backed up.\n\nReview your SQL database backup procedures and make any changes needed to ensure that backups happen in a timely fashion.The SQL database transaction log for Vault Store '{0}' has not been backed up for {1} days. The information in this database is at risk until the database has been backed up.\n\nReview your SQL database backup procedures and make any changes needed to ensure that backups happen in a timely fashion.The SQL database transaction log for Vault Store '{0}' has used {1}% of its allocated space.\n\nThe information in this database is at risk until the database has been backed up.\n\nReview your SQL database backup procedures and make any changes needed to ensure that backups happen in a timely fashion.\n\nEnsure that your database is adequately sized for the transactions taking place during an archive run.\n\nAlso check that there is enough disk space available to accommodate any growth in your database and database transaction log files.The Enterprise Vault Directory database has not been backed up for {0} days. The information in this database is at risk until the database has been backed up.\n\nReview your SQL database backup procedures and make any changes needed to ensure that backups happen in a timely fashion.The SQL database transaction log for the Enterprise Vault Directory database has not been backed up for {0} days. The information in this database is at risk until the database has been backed up.\n\nReview your SQL database backup procedures and make any changes needed to ensure that backups happen in a timely fashion.The Directory database transaction log has used {0}% of its allocated space.\n\nThe information in this database is at risk until the database has been backed up.\n\nReview your SQL database backup procedures and make any changes needed to ensure that backups happen in a timely fashion.\n\nEnsure that your database is adequately sized for the transactions taking place during an archive run.\n\nAlso check that there is enough disk space available to accommodate any growth in your database and database transaction log files.

The number of items pending indexing has grown above the threshold limit. Archiving for SharePoint task '{0}' will pause for 1 minute to allow the backlog to clear.

There are&nbsp;513935 savesets that are waiting to be indexed and/or waiting to be backed up or replicated in Vault Store 'EXUSNY2'. Check that your Indexing and Storage services are running. Review your procedures and make any changes needed to ensure that backups happen in a timely fashion. If you are using an EMC Centera, check the size of the Centera replication queue.There are&nbsp;XX index delete operations that have not yet been committed to disk for Vault Store '{1}'. Check that the Storage Service is running.There are {0} items pending restoration for Vault Store '{1}'.\n\nCheck that the StorageRestore process is running.\n\nIf necessary, slightly increase the number of Restore processes or threads. The settings are on the Advanced tab of the Storage Service's properties. The {0} process could not be started due to the following error:\n\n{1}\n\nCheck the privileges on the account that launched the process.The EVCustom web service on SharePoint server '{0}' version {1} does not match the archiving task version {2}. \n\nCheck that the Enterprise Vault components have been installed correctly on this SharePoint server.Error contacting the SharePoint server '{0}' \n{1} \n\nCheck that the server is running and that the Enterprise Vault components have been installed correctly on this SharePoint server.

Enterprise Vault Event Log is full.\n\nEvents will be written into the Application Event Log\nuntil space is available in the Enterprise Vault Event Log.

Enterprise Vault Converters Event Log is full.\n\nEvents will be written into the Application Event Log\nuntil space is available in the Enterprise Vault Converters Event Log.

The SharePoint task '{0}' has shutdown because there is no valid license key installed.\n\nSee the Administrator Help for information on license keys

The number of items pending indexing has grown above the threshold limit. Journaling for server {0} will pause for 1 minute to allow the backlog to clear.

The File Server Archive Manager cannot start because the required version of MAPI is missing or incorrectly configured on the Enterprise Vault server:\n\nTo resolve the problem:\n\n1. Stop all Enterprise Vault services and processes that are using MAPI.\n2. Ensure that a version of MAPI supplied with Microsoft Outlook 2003 or later is installed and correctly configured on the Enterprise Vault server.\n3. Restart the Enterprise Vault services.If the problem persists, see the "Troubleshooting" section of the Enterprise Vault Administration help file for guidelines on how to proceed.

The Lotus Journaling task '{0}' has shutdown because there is no valid license key installed.\n\nSee the Administrator Help for information on license keysThe Lotus Journaling task '{0}' cannot journal items from server '{1}' due to an unsupported journal configuration.\n\nSee the Administrator Help for supported journal configurations.

<p>File archiving on {0} reported {1} errors. See report file for details. </p> <p>e.g.</p> <p>File archiving on <a href="file://\\filesrv1.daa.bankuk.com">\\filesrv1.daa.bankuk.com</a> reported 4148 errors. See report file for details. <br /><br /></p>

Their is a problem with the archive required for storing the file '{0}' and the storage service can not use it.\nIt will be marked unavailable.\nThe associated error is: {1}.

Number of files imported:{0}\nNumber of files failed to import:{1}\nNumber of files not attempted to import:{2}\nNumber of new archives created:{3}\nTime taken:{4}The Lotus Journaling task '{0}' Unable to decrypt note:{1:x}, Database:{2}.\n\nYou cannot access portions of this document because it is encrypted and was not intended for you, or you do not have the decryption key.

The custom properties definition file failed to load correctly. Validate this file against the schema definition and correct any errors.\n\nReason: {0}

The following Domino mailbox has not been synchronized within {0} days.\n\nMailbox: {1}\n\nThere maybe a problem with the synchronisation process.

The Exchange mailbox provisioning task was aborted during processing. Unprocessed mailboxes do not have the latest policy settings, and any new mailboxes that were not processed cannot be enabled.\n\nRun the task again.\n\nTask: {0}\n\nDomain: {1}The Exchange mailbox provisioning task found a new mailbox with an existing entry in the Enterprise Vault database. The mailbox GUID does not match the entry in the database.\n\nTask: {0}\n\nMailbox: {1}\n\nSet the SynchInMigrationMode registry value in order to process this mailbox. See the documentation for further details.{0}The Exchange mailbox provisioning task linked a new mailbox to an existing entry in the Enterprise Vault database.\n\nTask: {1}\n\nNew mailbox: {2}\n\nExisting entry: {3}\n\n{4}{0}The Exchange mailbox provisioning task created a new entry in the Enterprise Vault database for a new mailbox that had an existing entry in the database. The existing entry has been renamed.\n\nTask: {1}\n\nNew mailbox: {2}\n\nExisting entry renamed to: {3}\n\n{4}The Exchange mailbox provisioning task failed during provisioning group processing. The task has stopped.\n\nTask: {0}\n\nDomain: {1}\n\nProvisioning group: {2}\n\nGroup member: {3}\n\nError: {4}\n\nTrace: {5}<p>The Exchange mailbox provisioning task failed during processing of a mailbox. The task is continuing. Task: {0} User: {1} Mailbox: {2} Provisioning group: {3} Group member: {4} Error: {5} Trace: {6} </p> <p>e.g.</p> <p><font face="Courier New" size="4">The Exchange mailbox provisioning task failed during processing of a mailbox. The process will continue.<br /><br />Error: SqlDateTime overflow. Must be between 1/1/1753 12:00:00 AM and 12/31/9999 11:59:59 PM.</font> </p>Task: '{0}'\n\nUnable to get Lotus Domino client directory location.\n\nEnsure you have the Lotus Client installed with valid registry entries.

The Exchange mailbox provisioning task found some mailboxes that are not eligible for processing by this task.\n\nThis task will process mailboxes on every Exchange Server in this domain that has been added to the Administration Console.\n\nIf you want this task to process such mailboxes, add the host Exchange Server to the Administration Console.\n\nSee the provisioning task report for further details.\n\nTask: {0}\n\nDomain: {1}The Exchange mailbox provisioning task failed to queue a mailbox synchronization request. See the provisioning task report for further details.\n\nTask: {0}\n\nDomain: {1}The Exchange mailbox provisioning task failed to initialize mailbox synchronization. Ensure that the Enterprise Vault archive tasks that process Exchange Servers in this domain are operating correctly.\n\nTask: {0}\n\nDomain: {1}\n\nError: {2}The Exchange mailbox provisioning task failed to read required information from Active Directory. The task has stopped. Ensure that the Active Directory server is operational and the account the task is using to log on has read access to the required objects. Then run the task again.\n\nTask: {0}\n\nDomain: {1}\n\nProvisioning group: {2}\n\nGroup member: {3}\n\nAD server: {4}\n\nError: {5}

The Exchange mailbox provisioning task failed to read required information from an Active Directory object. The task has stopped. Ensure that the account the task is using to log on has read access to the object and that the object has the required properties. Then run the task again.\n\nTask: {0}\n\nDomain: {1}\n\nProvisioning group: {2}\n\nGroup member: {3}\n\nAD server: {4}\n\nError: {5}<p>e.g.</p><font size="1"> <p><font size="3">The Exchange mailbox provisioning task found enabled mailboxes that are not part of a provisioning group. These mailboxes cannot be archived. If you do not want these mailboxes to be archived, use the Administration Console to disable them. See the provisioning task report for further details (full reports only).</font></p> <p><font size="3">Task: Exchange Provisioning Task for enterprise.veritas.com</font></p> <p><font size="3">Domain: enterprise.acme.com</font></p></font>

The Exchange mailbox provisioning task failed to process a mailbox store. Mailboxes on this store have not been provisioned.\n\nCheck that this mailbox store is operational. See the provisioning task report for a list of the affected mailboxes.\n\nTask: {0}\n\nDomain: {1}\n\nMailbox store: {2}\n\nError: {3}A provisioning group target contained no mailboxes. Update or delete this target.\n\nTask: {0}\n\nDomain: {1}\n\nProvisioning group: {2}\n\nTarget: {3}Duplicate archive point: '{0}'.\nThe original folder and its archive point have been copied.\nThis folder and its subfolders will not archived until this situation is resolved.\nRefer to the documentation for more information.The Exchange mailbox provisioning task could not connect to a domain controller for a domain in the forest. The task cannot process any Active Directory objects from this domain.\n\nTask: {0}\n\nDomain: {1}\n\nFailed domain: {2}\n\nError code: {3}The Exchange mailbox provisioning task found some mailboxes that are not eligible for processing by this task.\n\nThis task will process mailboxes on every Exchange Server in this domain that has been added to the Administration Console.\n\nIf you want this task to process such mailboxes, add the host Exchange Server to the Administration Console.\n\nTo include the names of these mailboxes in the provisioning task report, set the 'DisableExternalMbxLogging' registry value to 0.\n\nTask: {0}\n\nDomain: {1}

{0}The Exchange provisioning task found a mailbox with duplicate entries in the Enterprise Vault database, and automatically removed the duplicates. The default Vault ID of the most recent entry has been selected for this mailbox.\n\nThe mailbox is not currently enabled for client-side PST migration. You may wish to review this setting to confirm that it is correct.\n\nTask: {1}\n\nDomain: {2}\n\nMailbox: {3}\n\nEntryID: {4}\n\nDefault Vault ID: {5}\n\nDuplicate entries removed: {6}\n\nAssociated default Vault IDs: {7}{0}The Exchange provisioning task found a mailbox with duplicate entries in the Enterprise Vault database, and automatically removed the duplicates. The default Vault ID of the most recent entry has been selected for this mailbox.\n\nSome PST files were associated with one or more of the deleted entries. You may need to amend the database to associate the PST files with the new entry for this mailbox - contact support if required.\n\nThe mailbox is not currently enabled for client-side PST migration. You may wish to review this setting to confirm whether it is correct.\n\nTask: {1}\n\nDomain: {2}\n\nMailbox: {3}\n\nEntryID: {4}\n\nDefault Vault ID: {5}\n\nDuplicate entries removed: {6}\n\nAssociated default Vault IDs: {7}

If delete on delete flag of policy applied to volume is set, archived files will be deleted when placeholder is deleted. This may result in data loss.Could not set the apparent size of NetApp placeholders. (Error creating COM object.) \n\nNetApp placeholders will appear to have a size of 0 KB.

Could not contact the Enterprise Vault Domino Gateway server '{0}' ('{1}') in domain '{2}'.\n\nThis server has been marked as unavailable and will not be used until it becomes available. Check that the server is operating correctly and can be reached over the network, then run the provisioning task.There are no available Enterprise Vault Domino Gateway servers in domain '{0}'.\n\nUsers will not be able to view shortcuts or search archives until this problem is resolved. Check that the Enterprise Vault Domino Gateway servers for this domain are operating correctly and can be reached over the network, then run the provisioning task.

Domino server '{0}' has moved from cluster '{1}' to '{2}'.\n\nThis server was the Enterprise Vault preferred server in its previous cluster, but has not been set as the preferred server in the new cluster. Review the Enterprise Vault cluster settings and update if required.

Domino server '{0}' was removed from cluster '{1}'.\n\nThis server was the Enterprise Vault preferred server in the cluster - there is now no preferred server. Review the Enterprise Vault cluster settings and update if required.There was an error processing a mailbox. The task will process the mailbox again on the next archiving run.\n\nTask: {0}\n\nMailbox: {1}\n\nError: {2}\n\nTrace: {3}<p>There was an error processing an item in a mailbox. The task will process the item again on the next archiving run. Task: {0} Mailbox: {1} NoteID: {2} Subject: {3} Error: {4} Trace: {5} </p> <p>e.g.</p> <p>There was an error processing an item in a mailbox. The task will process the <br />item again on the next archiving run.</p> <p>Task: Domino Mailbox Archiving Task</p> <p>Mailbox: 'SERVER/ACME1!!mail\dowd'-CN=Elwood <a href="mailto:Dowd/O=ACME1@MYDOMAIN">Dowd/O=ACME1@MYDOMAIN</a></p> <p>NoteID: 110e</p> <p>Subject: &lt;unavailable&gt;</p> <p>Error: Error(3637): Unable to open note 110e - Cannot convert MIME message to <br />Notes Rich Text message.</p> <p>Trace:&nbsp;&nbsp;&nbsp; at DomNote.Open()<br />&nbsp;&nbsp; at LotusDominoMailboxArchivingTask.BaseQItem.OpenNote()<br />&nbsp;&nbsp; at LotusDominoMailboxArchivingTask.ArchiveQItem.Process()</p> <p></p>There was an error processing an item in a mailbox. The task has previously failed to process this item on several occasions. This item will not be processed again.\n\nTask: {0}\n\nMailbox: {1}\n\nNoteID: {2}\n\nSubject: {3}\n\nError: {4}\n\nTrace: {5}

The Enterprise Vault internal SMTP domains have not been configured.\nMessage direction cannot be evaluated until the internal SMTP domains have been defined.\nRefer to the documentation for more information.No Domino servers have been added as archiving targets. Add a server to the domain and run the provisioning task again.\n\nTask: {0}\n\nDomain: {1}

Unable to contact Domino archiving target server. Ensure that this server is operating correctly.\n\nTask: {0}\n\nDomain: {1}\n\nServer name: {2}\n\nError: {3}The archive for an enabled mailbox could not be found. The archive may have been deleted.\n\nThis mailbox has been disabled. Enable the mailbox again to resume archiving.\n\nTask: {0}\n\nUser name: {1}\n\nMailbox name: {2}

There was an error processing a mailbox. The task will process the mailbox again on the next archiving run.\n\nCheck that the Domino administrator account for the server '{0}' has a cross-certificate for the organization '{1}'.\n\nTask: {2}\n\nMailbox: {3}\n\nError: {4}The following item has failed during external filtering on {3} occassions and will not be processed again:\n\nSubject: {0}\nNoteId: {1}\nDatabase: {2}Task: '{0}'\n\nUnable to connect to Domino server '{1}' while processing mailbox '{2}'. The task will process the mailbox again on the next archiving run.The task was unable to process the items with the following note IDs due to unexpected data in the view summary. Contact support.\n\nTask: {0}\n\nView: {1}\n\nNote IDs: {2}Enterprise Vault could not authenticate a Domino user (group resolution failed). The user cannot access personal archives (access denied).\n\nUser name: {0}\n\nDomain: {1}\n\nError: {2}Enterprise Vault encountered an SQL Error while retrieving a set of mail files. If the retry is not successful then the remaining mail files in this Domain will not be processed in this archiving run.\n\nDomain: {0}\n\nRetry: {1}\n\nLowest MailboxId: {2}Enterprise Vault was unable to archive the following notes because they could not be opened. Contact support.\n\nTask: {0}\n\nMailbox: {1}\n\nNotes:\n{2}\nKey to error codes:\n{3}Enterprise Vault found encrypted notes in the Domino journal that do not appear to be encrypted by a user and that could not be decrypted by the journaling ID.\n\nCheck that you are using the correct journaling ID for this journal database. If you would like to archive these notes in their encrypted form, set the DominoJournalArchiveNonDecryptableNotes registry value to 1. See the documentation for further details.\n\nTask: {0}\n\nJournal database: {1}\n\nJournaling ID: {2}\n\nNote IDs: {3}

There was an error archiving an item in an NSF file. The item will be moved to the associated mail file, if available.\n\nNSF file: {0}\n\nNoteID: {1}\n\nSubject: {2}\n\nError: {3}\n\nTrace: {4}

There was an error archiving an item in an NSF file. The item will be moved to the associated mail file, if available.\n\nNSF file: {0}\n\nNoteID: {1}\n\nSubject: {2}\n\nError: {3}\n\nTrace: {4}

The specified 'Maximum Cache Size' is below the recommended value of 10GB.\nYou can edit the server's properties in the Administration Console to increase the size of the Cache.The Active Directory objects that hold information for Exchange Managed Folders are unavailable. This may be a problem with account permissions. See 'Installing and Configuring' for information on the Vault Service account permissions.\n\nObject: {0}The Content Cache Request Manager failed to process a client request because of one or more of the following: \n * Cache Location (Set in Server Properties)\n * 'Maximum Cache Size' (Set in Server Properties)\n * 'Maximum Concurrent Vault Cache Updates' is set to 0 (Set in Server Properties)\n * The Directory Service is unavailable\n * The Storage Service is unavailable\n\n The Content Cache Request Manager will work in 'offline' mode until the problem is fixed.The Content Cache Request Manager was unable to perform one or more tasks because the Directory Service or Storage Service was unavailable.An enabled mailbox could not be found on the mail server. The mailbox may have been deleted.\n\nEnterprise Vault has disabled this mailbox. You can re-enable the mailbox if the mailbox was only temporarily removed from the server.\n\nTask: {0}\n\nUser name: {1}\n\nMailbox name: {2}

The FSA Reporting Web service is not running at '{0}'.\nTo troubleshoot the Web service configuration, see the Enterprise Vault Technical Note 'Troubleshooting FSA Reporting'.The following Domino mailbox has not been synchronized in the last {0} days. The user associated with the mailbox is not in the Domino directory. Enterprise Vault has disabled this mailbox.\n\nMailbox: {1}\n\nUser: {2}\n\nLast synchronized: {3}

The SQL database for Vault Store Group '{0}' has not been backed up for {1} days. The information in this database is at risk until the database has been backed up.\n\nReview your SQL database backup procedures and make any changes needed to ensure that backups happen in a timely fashion.The SQL database transaction log for Vault Store Group '{0}' has not been backed up for {1} days. The information in this database is at risk until the database has been backed up.\n\nReview your SQL database backup procedures and make any changes needed to ensure that backups happen in a timely fashion.The SQL database transaction log for Vault Store Group '{0}' has used {1}% of its allocated space.\n\nThe information in this database is at risk until the database has been backed up.\n\nReview your SQL database backup procedures and make any changes needed to ensure that backups happen in a timely fashion.\n\nEnsure that your database is adequately sized for the transactions taking place during an archive run.\n\nAlso check that there is enough disk space available to accommodate any growth in your database and database transaction log files.There was an error processing an item in a database. The task will process the item again on the next archiving run.\n\nTask: {0}\n\nDatabase: {1}\n\nNoteID: {2}\n\nSubject: {3}\n\nError: {4}\n\nTrace: {5}There was an error processing an item in a database. The task has previously failed to process this item on several occasions. This item will not be processed again.\n\nTask: {0}\n\nDatabase: {1}\n\nNoteID: {2}\n\nSubject: {3}\n\nError: {4}\n\nTrace: {5}Source archive {0} is unavailable. The current state of source archive is {1}. Enterprise Vault will try again later unless the retry count has been reached.Cannot change the source archive state to 'closed'. Enterprise Vault will try again later unless the retry count has been reached.\n\nSource archive: {0}\n\nException: {1}Cannot read the state of the source archive. Enterprise Vault will try again later unless the retry count has been reached.\n\nSource archive: {0}\n\nException: {1}Cannot set the source archive state back to its original state: {0}. You must reset the source archive state manually.\n\nSource archive: {1}\n\nException: {2}

Could not mark the destination archive for shortcut processing. Enterprise Vault will try again later unless the retry count has been reached.\n\nException: {0}

The Vault Service account has been granted read permissions to the source archive. The task could not reset the permissions to their original values. You must reset the permissions manually.\n\nSource archive: {0}\n\nException: {1}.

Could not read the source archive. Enterprise Vault will try again later unless the retry count has been reached.\n\nSource archive: {0}\n\nException: {1}.An error was encountered while processing an item. Enterprise Vault will try again later unless the retry count has been reached.\n\nItem: {0}\n\nArchive: {1}\n\nException: {2}.Could not determine the shortcut update task for the destination archive. Enterprise Vault will try again later unless the retry count has been reached.\n\nSource archive: {0}\n\nDestination archive: {1}\n\nException: {2}.Could not update the shortcuts for the destination archive. Enterprise Vault will try again later unless the retry count has been reached.\n\nSource archive: {0}\n\nDestination archive: {1}\n\nException: {2}.Could not grant the Vault Service account read access to the source archive. If the Vault Service account does not already have read access to the archive the move will fail.\n\nSource archive: {0}\n\nException: {1}.

Could not update Microsoft Exchange mailbox folders with the new archive folder entry IDs. Enterprise Vault will try again later unless the retry count has been reached.\n\nSource archive: {0}\n\nDestination archive: {1}\n\nException: {2}.Error: the system default codepage must be set to English. It is currently set to {0}.\n\nTo fix this problem, use Regional and Language Options in the Windows Control Panel to set the language for non-Unicode programs to English (United States).\n\nContact support for further information.Could not move the source archive because both the source and destination archive are associated with an enabled user. Disable the user associated with the source archive.\n\nSource archive: {0}\n\nDestination archive: {1}.Could not move the source archive because the destination archive is not associated with an enabled user. Try moving to a new archive or to an archive associated with an enabled user.\n\nSource archive: {0}\n\nDestination archive: {1}.The destination Vault Store is in backup mode. Enterprise Vault will wait until the backup mode of the destination folder is cleared.\n\nSource archive: {0}\n\nDestination Vault Store: {1}.The destination Vault Store is no longer in backup mode. The archive move will start.\n\nSource archive: {0}\n\nDestination Vault Store: {1}.

Enterprise Vault cannot update an archived note. Enterprise Vault will not attempt to process the note again. You can delete the note after the saveset has been backed up.\n\nTask: {0}\n\nDatabase: {1}\n\nNoteID: {2}\n\nReason: {3}Could not create or update the archive history record for the source archive. Enterprise Vault will try again later unless the retry count has been reached.\n\nSource archive: {0}\n\nDestination archive: {1}\n\nException: {2}.Archive move has been stopped.\n\nSource archive: {0}\n\nDestination Vault Store: {1}\n\nReason: {2}.\n\nEnterprise Vault will try again later.Archive move has been stopped.\n\nSource archive: {0}\n\nDestination archive: {1}\n\nReason: {2}.\n\nEnterprise Vault will try again later.Could not determine whether the backup of the items in the destination archive is complete. Enterprise Vault will try again later unless the retry count has been reached.\n\nSource archive: {0}\n\nDestination archive: {1}\n\nException: {2}Failed to determine whether the source archive contains items that are on legal hold. Enterprise Vault will try again later unless the retry count has been reached.\n\nSource archive: {0}\n\nDestination archive: {1}\n\nException: {2}Could not grant the Vault Service account access to the destination archive. If the Vault Service account does not already have access to the archive the move will fail.\n\nDestination archive: {0}\n\nException: {1}.The Vault Service account has been granted full permissions to the destination archive. The task could not reset the permissions to their original values. You must reset the permissions manually.\n\nDestination archive: {0}\n\nException: {1}.Move archive has detected an error occurred when the items in the destination archive were being verified following a backup.\nThe maximum retry threshold has been reached and Archive moves will no longer attempt to re-copy any further items.\n\nPlease check the event log on the Enterprise Vault server where the destination archive is located.\nPlease check the Move archive log file on the Enterprise Vault server where the source archive is located.\n\nThe move archive documentation contains more information about setting the threshold for the maximum number of retries.\n\nSource archive: {0}\n\nDestination archive: {1}\n\nDestination Vault Store: {2}Move archive detected a storage error while the items in the destination archive were being verified following a backup. Check the event log on the Enterprise Vault server that hosts the destination archive.\n\nUnless the maximum number of retries has been exceeded, move archive will re-copy the items, wait for the items to be backed up, then repeat the verification.\n\nSource archive: {0}\n\nDestination archive: {1}.\n\nDestination Vault Store: {2}FSA Reporting cannot work on file server {0}. The version of the FSA Agent that is on the file server is older than the version of Enterprise Vault that is on the Enterprise Vault server.\nUpgrade the FSA Agent to a compatible version.Move archive cannot move this item because it already exists in another archive in the destination vault store.\n\nItem: {0}\n\nSource archive: {1}\n\nDestination vault store: {2}\n\nSelected destination archive: {3}\n\nArchive that contains the duplicate: {4}\n\nEnterprise Vault will try again later unless the retry count has been reached.\n\nFor more information about the handling of duplicate items, see the Administrator's Guide.

The Enterprise Vault NetApp File Placeholder service is starting For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp

The Enterprise Vault NetApp File Placeholder service has started For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp The Enterprise Vault NetApp File Placeholder service has stopped For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp An exception has occurred. [Internal reference %1] For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp Invalid argument passed to method Argument: %1 For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp The NetApp Placeholder Service is configured to run under the Local System account. It should be configured to run under the Vault Service Account. For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp You cannot start a running server For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp Failed to start the main server thread due to the following error: %1 For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp Failed to initialize the NetApp placeholder server For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp Failed to start the server worker threads for the NetApp placeholder server named: %1 For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp An exception has occurred. [Internal reference %1] For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp There are no more items to process For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp At least one of the Item Processor threads has failed For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp All of the item Processor threads have stopped For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp A worker thread in the NetApp placeholder server server has failed. The NetApp placeholder server will attempt to restart the server For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp Failed to contact the Filer named: %1 For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp Failed to register with the Filer named: %1, Error: %2 For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp An unrecoverable error has occurred, the service will be shut down For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp The slave process for the NetApp placeholder server named: %1 has failed and will be restarted For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp The slave process for the NetApp placeholder named: %1 has failed and will NOT be restarted as it has exceeded %2 restarts in %3 minutes For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp The slave process for the NetApp placeholder named: %1 is not responding and will be restarted For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp The slave process for the NetApp placeholder named: %1 is not responding and will NOT be restarted as it has exceeded %2 restarts in %3 minutes For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp The slave process for the NetApp placeholder named: %1 has requested a restart and will be restarted For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp The slave process for the NetApp placeholder server named: %1 has requested a restart but will NOT be restarted as it has exceeded %2 restarts in %3 minutes For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp The NetApp placeholder server for Filer: %1 failed to configure FPolicy, error: %2, the placeholder server will shutdown For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp The NetApp placeholder server for Filer: %1 failed to start as the filer does not support Manage ONTAP V7.0 or greater For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp File successfully recalled but the last-modified date does not match the original date. The file may be archived again as a new version. File: %1 For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp The custom filter could not get the rule set name. Error: %1 Internal References: %2 %3 For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp An error has occurred in the custom rules mechanism. Error: %1 Internal References: %2 %3 For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp The custom filter could not add any rule sets. Please check the XML files are available in '%4'. Error: %1 Internal References: %2 %3 For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp An error has occurred when adding a custom rule set. This error may be caused by incorrect XML syntax. Error: %1 Internal References: %2 %3 For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp Could not start the custom filter. Error: %2 Internal References: %1 %3 For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp The custom filter could not process a message. Error: %1 Internal References: %2 %3 For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp An error has occurred when adding custom rule set '%1'. Requested retention category '%2' does not exist. Please check that the custom rule set references existing retention categories only. For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp An error has occurred when adding custom rule set '%1'. Requested archive '%2' does not exist. Please check that the archive specified has been created in Enterprise Vault. For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp An error has occurred when adding custom rule set '%1'. Requested archive '%2' is in an invalid state (%3). For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp An error has occurred when adding custom rule set '%1'. Requested archive '%2' could not be found Internal References %3 For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp An unrecoverable error has occurred in one of the custom rules. For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp An unrecoverable error has occurred in one of the custom filters. For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp The custom properties definition file could not be found - custom property indexing and categorisation functionality has been disabled. For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp There was a problem adding property '%1' to custom property set '%2'. Details: %3 %4 For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp There was an unrecoverable error processing custom properties. Details: %1 For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp You do not have a Custom XML Filter license. If you want to use the Custom XML Filter please contact your license supplier. For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp Your Custom XML Filter license has expired. If you want to use the Custom XML Filter please contact your license supplier. For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp External Filter '%1' initialising... For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp External Filter '%1' stopped. For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp An error has occurred when adding custom rule set '%1'. The action '%2' requested by rule '%3' is not supported by '%4' tasks. For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp An error has occurred when adding a custom rule set. The distribution list '%1' requested is ambiguous in the Exchange server. Could not resolve name to a single distribution list. Check for distribution lists with the same display name. For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp An error has occurred when adding a custom rule set. The distribution list '%1' requested could not be found. (Is the spelling correct?) For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp

IArchivingControl2::MAPISaveChanges() is not supported when using get_CDOMessage or get_CDOMessageEnvelope. If the filter changes message properties or attachments you must use get_MAPIMessage and/or get_MAPIMessageEnvelope. For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp The CDO components are not installed on the Enterprise Vault server. A filter has requested access to a message using CDO. This type of access is supported only when Outlook 2003 is installed on the Enterprise Vault server. Resolution: Install Outlook 2003, including the Collaboration Data Objects, on the Enterprise Vault server. For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp A critical error occurred initialising the deduplication cache. Error: %1 Internal References: %2 %3 For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp An error has occurred in the deduplication cache. Error: %1 Internal References: %2 %3 For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp The Directory Service name is invalid or the Directory Service is not running For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp The Directory property must be set first For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp Could not create the Enterprise Vault Directory Connection object For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp

An error occurred replacing the script parameters For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp One of the arguments supplied in the arguments array could not be converted to a string For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp The Site property must be set before this property For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp

The Indexing Service could not be found For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp The following properties must be set before Enable/Disable can be called: Directory, Site, ExchangeServer, SystemMailbox, (MailboxDN or LDAPQuery) For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp Failed to create a StdIn pipe For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp Failed to create the StdOut pipe For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp Failed to duplicate the std handle For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp Failed to close the temporary handle For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp The password for the Logon details was not set For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp Failed to create the policy manager process For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp Failed to create the policy manager process under the specified account For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp Could not log the user on for the policy manager process For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp Failed to wait for the process to complete For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp Could not get the exit code from the policy manager process For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp Could not get the temp file path For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp Could not get the temp file name For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp Could not create the provisioning initialization file For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp Could not write the provisioning initialization file For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp Could not close the provisioning initialization file For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp Failed to connect to the Admin Service For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp The second argument must be an array For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp The Script file could not be found For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp

Could not open the Enterprise Vault Registry Key For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp Could not read the Installation directory from the registry For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp The script returned errors, check the report for details For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp

Failed to read the Logon Details For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp The following properties must be set before ExecuteScript can be called: Directory, ExchangeServer, SystemMailbox, (ScriptFile or ScriptText) For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp The domain name specified does not exist. For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp Error occurred while accessing the database. For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp Error occurred while communicating with Active Directory. For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp Unspecified error occurred while Exchange provisioning task processing. For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp The provisioning task failed to process the target. For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp Failed to access the Directory service. For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp Failed to read record from Directory database. For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp Folder skipped from being processed. For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp

Fileserver synchronization failure. For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp The user cannot by synchronized until they have been provisioned. For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp Journal mailboxes cannot be synchronized using the IExchangeServerSync::SyncMailbox call. For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp A provisioning run to synchronize policies is required. For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp The Exchange Server has not been configured in the current Vault site or an Archiving task has not been configured. For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp The folder path provided does not exist in the mailbox. For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp The folder is being managed by Exchange and is not supported through this interface. For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp The mailbox is not enabled. For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp The user policy does not allow processing of the Deleted Items folder. For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp ProvisioningAPI components must be created out of process. For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp

The user %1 attempted to restore a message into an Exchange mailbox and they were not the mailbox owner or an Administrator <br>e.g.<br> The user ACMEDOM\DOWDEP attempted to restore a message into an Exchange mailbox and they were not the mailbox owner or an Administrator

IRestorationAgent->SavesetAvailable() function failed whilst processing the item with TransactionID: %1, SavesetID: %2 <br>e.g.<br> IRestorationAgent->SavesetAvailable() function failed whilst processing the item with TransactionID: G6TR874KF80B11D781D7004769855A8, SavesetID: 5483230000000000~20011191224270000~0~5KFR47DB45DB40069919F64EBA4D40C The user restore request TransactionID: %1, SavesetID: %2 failed whilst being processed by the storage service <br>e.g.<br> The user restore request TransactionID: C7B961F9D8D54E92888E6C12D1A787C, SavesetID: 639000000000000~200401230634000000~0~7E05C940AC664C7C97DB41695CB764F failed whilst being processed by the storage service

Mailbox Report Date: %1 System Name: %2 Mailbox Name: %3 Associated Account: %13 Mailbox State: %18 Mailbox Quota Limit: %14 KB Mailbox Quota Used: %15 KB Percentage of Mailbox Quota free: %16 Number of archivable items in mailbox: %4 Total size of archivable items in mailbox: %5 KB Number of archivable folders in mailbox: %6 Number of items ready to archive: %7 Total size of items ready to archive: %8 KB Number of items that would be archived: %9 Total size of items that would be archived: %10 KB Number of expired shortcuts that would be deleted: %17 Start Time: %11 End Time: %12

Could not scan user mailbox %2, unable to get the entry id of the Deleted Items folder Reason: %1 <br>e.g.<br> Could not scan user mailbox /o=acme/ou=US-ACME/cn=Loadsim Users/cn=EXUSNY2/cn=Nee1t0g3aa, unable to get the entry id of the Deleted Items folder<Br> Reason: <0x8004011b> <br>

Could not scan user mailbox %2, unable to list folders Error: %1 Reference: %3 <br>e.g.<br> Could not scan user mailbox /O=ACME/OU=NY/CN=RECIPIENTS/CN=DOWDEP, unable to list folders <br> Error: <0x8004011b> <br> Reference: PF_GetFolderTable[2]<br>

An error occurred whilst post processing a message and it could not be changed back from the Archive Pending state. Error that caused the message to be changed back: %1 Error when trying to change the message back: %2 <br>e.g.<br> An error occurred whilst post processing a message and it could not be changed back from the Archive Pending state. Error that caused the message to be changed back: 8004011d Error when trying to change the message back: c0040899

Could not get a MAPI session from the session pool whilst processing mailbox %1 The following error was returned: %2. <br>e.g.<br> Could not get a MAPI session from the session pool whilst processing mailbox /o=ACME/ou=ZKO Group/cn=Recipients/cn=dowdep The following error was returned: 80004005.

Error processing archiving request for system %1, could not list mailboxes for the Exchange system <BR>e.g.<BR> Error processing archiving request for system /O=ACME /OU=ZKO/cn=Configuration/cn=Servers/cn=ACMEEX1, could not list mailboxes for the Exchange system

This is an example. Details may be quite different.<p> A queued operation exceeded the retry count and has been discarded<p> Enterprise Vault Journaling Service for ACMEEXCH1<p> m_pIBackgroundArchivingAgent->ProcessItem(Priority = "true",<br> ExchangeSystem = "ACMEEXCH1",<br> m_pILocation,<br> (ULONG)EntryIdSize = 70,<br> EntryId,<br> ArchiveId = "1828E94DA5D483744B6E82329221A153A1110000huyton.zko.acme.com",<br> RetentionCategory= "181667B5FEBDAD3119CAB00508B070AE51b10000huyton.zko.acme.com",<br> UserMailboxDn = "/o=ACME/ou=EENGINEERING/cn=Servers/cn=stewart-journal",<br> MessageTitle = "Tax Return",<br> nRetryCount = 3,<br> NULL,<br> CallerSID,<br> isAReArchive = 0, ArchiveTransId = "5E24F8CD11B14E60A60A8443859FF7F", IndexedPropertiesSet = "");<p> HRESULT: 0x80070057 %2

Could not get a MAPI session from the session pool whilst post processing an archived item The following error was returned: %1. <br>e.g.<br> Could not get a MAPI session from the session pool whilst post processing an archived item <p> The following error was returned: c00408da.

Error whilst enabling mailbox for user o=Acme/ou=ZKO Administrative Group/cn=Recipients/cn=dowdp, error sending enabled message. <p> Possible Reason: The message file could not be found. <p> Please refer to 'Editing the Welcome Message' in the Administration Help for more information on editing and copying the enabled message file. e.g. Error whilst disabling mailbox for user {mailbox DN}, error sending disabled message <p> Possible Reason:<br> The message file could not be found. <br> Please refer to 'Editing the Welcome Message' in the Administration Help for more information on copying the disabled message file.

%1:AgentMessageDispenser::ProcessNextMessage() Activate object returned with status AGENTS_E_DISPSLEEP. A worker thread has asked the service to sleep for a time period. Setting the current time in agent entry and then telling worker threads to sleep. The message will be reposted to the end of the queue %1:AgentMessageDispenser::ProcessNextMessage() Activate object returned with status AGENTS_E_DISPABORTITEM. The dispenser has aborted the processing of the item. This failure will be processed by dropping through to the AGENTS_E_DISPABORT case section %1:AgentMessageDispenser::ProcessNextMessage() Activate object returned with status AGENTS_E_DISPABORT. The dispenser has been told to stop. The current message will be reposted to the end of the queue and the current transaction will be committed. Its retry count will NOT be incremented

%1:AgentMessageDispenser::ActivateObject() Error message = RETRIEVAL_UPDATERESTORATIONCLIENT. The restoration agent has failed to notify a Restoration client, so abort the current message and report to the back of the message queue. We will not up the retry count

%1:CArchivingAgent::ProcessUser() Attempt to open the users message store resulted in failure with error message = MAPI_E_FAILONEPROVIDER This is because the mailbox does not exist. This often happens when processing utility accounts like site connectors, or when mailboxes have been deleted after a process mailbox message has been queued

%1:CArchivingAgent::PostProcessArchivedItem() The archive operation was canceled, so the Archive Pending message will be removed from the queue and no further processing done. The archived messages from the storage service and the index service will be deleted.

The Agent failed to create the AgentClientBroker.Exe with the following error %1, the service will shut down <P>For example:<br> The Agent failed to create the AgentClientBroker.Exe with the following error 80070008, the service will shut down

The user %1 attempted to archive a message from an Exchange mailbox where they are not the mailbox owner or an Administrator <br>e.g.<br> The user ACMEDOM\DOWDE attempted to archive a message from an Exchange mailbox where they are not the mailbox owner or an Administrator

Error opening MSMQ Dead Letter Queue - Access is denied for queue %1 Using MSMQ Explorer, edit the permissions of the Computer on which the queue resides. Ensure that the local Administrators group has "Full Control" access. The computer properties to modify will be those of the system on which this error is logged. This can be verified by checking that the ID of the computer (displayed within the General tab of the Computer properties) corresponds with the queue name within this message

An unexpected timeout occurred while attempting to access a queued message. This may have occurred because a message was not on a queue as expected or because the system is heavily loaded, thus causing excessive MSMQ delays. If you suspect the problem is caused by MSMQ delays, try increasing the Enterprise Vault "QueueTimeout" registry value, as described in the "Modifying Registry Settings" section in the Troubleshooting section of the Administrator help.

MSMQ negative acknowledgment message(s) have been handled. Queue:%1 Reason: The message was purged at the destination queue <br>e.g.<br> MSMQ negative acknowledgment message(s) have been handled. Queue:.\private$\Enterprise Vault Archiving Service for EXCHANGE Admin Queue Reason: The message was purged at the destination queue

A MSMQ negative acknowledgment message has been processed for a message of type 'PROCESS MAILBOX'. The Exchange User Mailbox: %1 on the Exchange system: %2 will not be automatically archived until the next archive scheduled period

Error whilst processing the mailbox %1 Unable to retrieve the Domain\Username string from the mailbox. Possible reasons include: 1. There is no Associated Account with the specified mailbox. 2. The users Domain controller is unavailable. Error returned : %2

The following message could not be archived by the Archive/Public Folder Service as it may be corrupt. Title: %1 Mailbox: %2 No further attempts will be made to archive this message. To override this, clear the "Do not archive this item" property on the message in the mailbox.

Whilst post processing a message an error occurred in CArchivingAgent::PostProcessArchivedItem() whilst calling CExchangeShortcutAccessor::BuildFromSessionAndLocation(). <p> Error returned from BuildFromSessionAndLocation(): 80004005 Error returned from BuildFromSessionAndLocation(): %1

The Storage Service is still at its upper MSMQ threshold. The Archiving/Journaling Service will pause for %1 minutes to let it recover. Mailbox %2 will be processed again when the service resumes processing. <br>e.g.<br> The Storage Service is still at its upper MSMQ threshold. The Archiving/Journaling Service will pause for 15 minutes to let it recover. Mailbox /O=ACME /OU=REO/CN=RECIPIENTS/CN=DOWDP will be processed again when the service resumes processing.

An error has occurred whilst processing the Public Folder %1. Check the Event Log for any previous errors, as they may help determine the cause. Error: %2 <br>e.g.<br> An error has occurred whilst processing the Public Folder \ACME\Engineering\Users\Elwood P Dowd\. Check the Event Log for any previous errors, as they may help determine the cause. Error: 0x800B0001

Public Folder Report Date: %1 System Name: %2 Public Folder start point: %3 Number of archivable items (from start point): %4 Total size of archivable items (from start point): %5 KB Number of folders processed: %6 Number of items ready to archive: %7 Total size of items ready to archive: %8 KB Number of items that would be archived: %9 Total size of items that would be archived: %10 KB Number of expired shortcuts that would be deleted: %13 Start Time: %11 End Time: %12

Could not build a saveset for the message titled %1 in Mailbox %2, function %3 failed Error returned = %4 <br>e.g.<br> Could not build a saveset for the message titled in Mailbox /o=ACME/ou=REO/cn=ZKO/cn=Dowdp, function ISaveset::Store() failed <br> Error returned = 0xC0041AA6

Error reading the legacy message store and mailbox distinguished names from active directory for mailbox %1 The format of the JournalServiceEntry JournalingMailboxDn attribute is incorrect, it should be the active directory distinguished name of the journal mailbox not the Exchange 5.5 legacy mailbox distinguished name. The service will now shut down

A MSMQ negative acknowledgment message has been processed for a message of type 'PROCESS MAILBOX 2K'. The Exchange User Mailbox: %1 on the Exchange system: %2 will not be automatically archived until the next archive scheduled period

The IRestorationAgent->RestoreItem() function failed whilst processing the item with TransactionID: %1, SavesetID: %2 Number of retries: %3 The retrieval request has failed because the associated Saveset could not be found on the spool queue. The retrieval request will now be discarded It is possible that the Saveset has been removed from the spool queue because it has not been received in time. <br>e.g.<br> The IRestorationAgent->RestoreItem() function failed whilst processing the item with TransactionID: 5123104F6ADC42AAB41C617FFE1A3FE, SavesetID: 101310000000000~200304180803140000~0~5303A7CBB67642ACAB2B555CEB49ED7 <br>Number of retries: 30 <br> The retrieval request has failed because the associated Saveset could not be found on the spool queue. The retrieval request will now be discarded <br> It is possible that the Saveset has been removed from the spool queue because it has not been received in time.

Could not get a MAPI session when validating the public folder root path %1 The following error was returned: %2. Please check that the Exchange Server %3 is running and that the Vault Site account has the correct privileges. <br>e.g.<br> Could not get a MAPI session when validating the public folder root path \ACME\IT The following error was returned: 80040111. Please check that the Exchange Server ACMEEXCH1 is running and that the Vault Site account has the correct privileges.

The mailbox %1, has exceeded its "Prohibit Send & Receive" limit and cannot be processed. Maximum allowed: %2 KB Current level : %3 KB If you wish Enterprise Vault to archive items from this mailbox then this quota must be removed. <p>e.g.<br> The mailbox /O=ACME/OU=REO/CN=RECIPIENTS/CN=DOWDP, has exceeded its "Prohibit Send & Receive" limit and cannot be processed.<br> Maximum allowed: 4000 KB<br> Current level : 7000 KB<br> If you wish Enterprise Vault to archive items from this mailbox then this quota must be removed.

The Vault selected on the current folder no longer exists in the Vault Directory. This folder will be set to 'Do Not Archive' and all messages in this folder will be ignored until the folder settings are changed. <p> Details: <br> VaultId: <br>1BD1B1AF49AD8D311ACEE00508B070AE51110000huyton.zko.acme.com <br> Mailbox: /o=ACME/ou=ACMEENGINEERING/cn=ZKO/cn=dowdp <br> Folder: Deleted ItemsThe Vault selected on the current folder has a status that means the Vault cannot be used for Archiving. This folder will be set to 'Do Not Archive' and all messages in this folder will be ignored until the folder settings are changed. Details: Vault Name: %1 VaultId: %2 Status: %3 Mailbox: %4 Folder: %5 PF_CheckVaultAvailability has been unable to determine the current Vaults status. Details: VaultId: %2 Mailbox: %3 Folder: %4 Reason: %1 <br>e.g.<br> PF_CheckVaultAvailability has been unable to determine the current Vaults status. Details: VaultId: 1D5A96DEEBB68D61183B000508B319C691110000vault.acme.com Mailbox: /o=ACME/ou=ENGINEERING/cn=Recipients/cn=Journal Folder: Top of Information Store Reason: Not enough storage is available to complete this operation. [0x8007000e]

The following message could not be archived by the Journaling Service as it may be corrupt. Title: %1 Mailbox: %2 No further attempts will be made to archive this message. The message has been moved to the 'Enterprise Vault Journaling Service\Failed to copy' folder. <font face="Courier New"><span class="FIXEDFONT">The following message could not be archived by the Journaling Service as it may be corrupt. </span><br /><tt><span class="FIXEDFONT">Title: %1</span></tt></font><br /><tt><span class="FIXEDFONT">Mailbox: %2 </span></tt><br /><br /><tt><span class="FIXEDFONT">An error occurred whilst moving the message to the 'Enterprise Vault Journaling Service\Failed to copy' folder. The message has been marked as "Do Not Archive", and no further attempts will be made to archive this message.</span></tt><br />

The public folder service named: %1 could not access the public folder with path: %2. Reason: The contents of this public folder are currently unavailable. Either the Microsoft Exchange Server computer servicing this public folder is down or the public folder service does not have privileges to access this folder

The following folders have exactly the same Vault properties: (a) %1 (b) %2 Possible causes (and their outcome) of this problem: 1) Public folder (a) is a copy of (b). A new Vault will be created for the public folder (a) 2) Public folder (a) has been renamed and a new folder (b) created with the original pathname. The original Vault for folder (a) will no longer have its permissions automatically synchronized and items in this folder may not be available to all its subscribers. A new Vault will be created for both public folders (a) and (b).

An error occurred whilst checking the site Id for the mailbox %1. This mailbox will not be processed. Error: %2 <br>e.g.<br> An error occurred whilst checking the site Id for the mailbox /O=ACME/OU=US-ACME/CN=LOADSIM/CN=EXUSNY1-OUTL1912. This mailbox will not be processed. Error: 0x2F1E344

Could not determine the default system codepage. To process all messages, regardless of their native language, set the following DWORD registry key to the value "2" and restart the service: HKLM\Software\KVS\Enterprise Vault\Agents\CodepageProcessing

An error occurred whilst enabling archiving for the mailbox %2 Error: %1 <br>e.g. An error occurred whilst enabling archiving for the mailbox /o=First Organization/ou=First Administrative Group/cn=Recipients/cn=test2 <br> Error: Unspecified error [0x80004005]

Failed whilst initializing the Filter Controller. The agent will now shut down as it cannot reliably continue. Error: %1 <br>For example:<br> Failed whilst initializing the Filter Controller. The agent will now shut down as it cannot reliably continue. <br> Error: Catastrophic failure [0x8000ffff]

An error has occurred in the Distribution List caching object. [Internal reference %1] <br>e.g.<br> An error has occurred in the Distribution List caching object.<br> [Internal reference CDLCache::/CC<br>(/O=ACME/OU=ZKO/CN=SYSTEM DISTRIBUTION LISTS/CN=SALES )/e2/6] <br>

<br>e.g.<br> A RetrieveMarkedItems request has failed. Not all of the messages could be returned to a shortcut. These messages will remain as pending retrieval in the users mailbox. Mailbox: /o=Dowd Elwood <br> Folder: Inbox <br> Error: <0x8004011c> <br>

A MSMQ negative acknowledgment message has been processed for a message of type 'PROCESS MAILBOX EX'. The Exchange User Mailbox: %1 on the Exchange system: %2 will not be automatically archived until the next archive scheduled period <br>e.g.<br> A MSMQ negative acknowledgment message has been processed for a message of type 'PROCESS MAILBOX EX'. The Exchange User Mailbox: /O=ACME/OU=ZKO/CN=RECIPIENTS/CN=ELWOODP on the Exchange system: /o=Acme/ou=ZKO/cn=Configuration/cn=Servers/cn=EXCHANGE/cn=Microsoft Private MDB will not be automatically archived until the next archive scheduled period

An error occurred performing a request to synchronize the mailbox %2. Error: %1 <p>e.g.<br> An error occurred performing a request to synchronize the mailbox /o=ACME/ou=ZKOEUROPEENGINEERING/cn=SUP REO/cn=DOWDP. <p> Error: The MAPI error MAPI_E_FAILONEPROVIDER (0x8004011D) has occurred whilst synchronizing the properties of mailbox . The mailbox will not be synchronized until the next scheduled run. [0xc0040ccd]

An error has occurred listing mailboxes on Exchange Server %2 for synchronization. Error: %1 Internal: %3 <br>e.g.<br> An error has occurred listing mailboxes on Exchange Server ACMEEXCH1 for synchronization. <br> Error: The parameter is incorrect. [0x80070057] <br> Internal: AgentExchSynch.cpp (CAgentExchSynch::ListMailboxesExchange2k) [lines {1105,1109,1144}] built Mar 4 14:22:44 2004 An error has whilst synchronizing the properties of mailbox %2. Error: %1 Internal: %3 <br>e.g.<br> An error has whilst synchronizing the properties of mailbox /o=ACME/ou=Messaging Administrative Group/cn=Recipients/cn=DowdP. <br>Error: The server is not operational. [0x8007203a]

A MSMQ negative acknowledgment message has been processed for a message of type 'MARK DELETED MAILBOXES'. Mailbox entries for exchange server %1 will not be processed to determine if they have been deleted until the next schedule.

User {Account name} failed to access an item located in vault {Vault Name} due to insufficient privileges. <p> A frequent cause of this error is a user attempting to open a shortcut that has been forwarded but points to a vault where they do not have the appropriate access.

Failed to list mailbox permissions whilst synchronizing due to a missing Active Directory attribute. User: %1 Attribute: %2 <br>e.g.<br> Failed to list mailbox permissions whilst synchronizing due to a missing Active Directory attribute. User: CN=Elwood Dowd,OU=Users,OU=ZKO,OU=Sites,OU=US OUs,DC=KVS,DC=local Attribute: msExchMailboxSecurityDescriptor

Timed out whilst waiting for the MAPI profile mutex Exchange Server: %1 MutexName: %2 Reason: %3 <p>e.g.<br> imed out whilst waiting for the MAPI profile mutex Exchange Server: NYC MutexName: EnterpriseVaultProfileMutex 1A7469D53DE17814FBFC793D5AB682F1E1i10000acme.com Reason: WAIT_TIMEOUT** This is an example of the event. Some details will be different **<p> Could not get a MAPI session from the session pool. <p> Error: <0x80040115> <br> Service: Enterprise Vault Journaling Service for ACMEEXCH1 <br> Additional Information: <br> Whilst processing user /o=ACME/ou=ZKO/cn=Recipients/cn=E2K MAILBOXES/cn=DOWDEP

Error reading the legacy message store and mailbox distinguished names from active directory for mailbox %1 The format of the JournalServiceEntry JournalingMailboxDn attribute is incorrect, it should be the active directory distinguished name of the journal mailbox not the Exchange 5.5 legacy mailbox distinguished name.

The following message could not be archived by the Archive/Public Folder Service as it may be corrupt. Title: %1 Mailbox: %2 If you see this warning repeatedly contact KVS Support. <p>e.g.<br> The following message could not be archived by the Archive/Public Folder Service as it may be corrupt. <p> Title: Fwd: Mark in ZKO<br> Mailbox: /o=acme/ou=ZKOEUROPEENGINEERING/cn=SUP REO/cn=Dowdp If you see this warning repeatedly contact KVS Support. The following message could not be archived by the Archive/Public Folder Service due to message complexity. Title: %1 Mailbox: %2 No further attempts will be made to archive this message. To override this, clear the "Do not archive this item" property on the message in the mailbox.

The number of items pending indexing for the archive has grown above the threshold limit. This service will pause for 5 minutes to allow the backlog to clear. Mailbox: %1 Archive Name: %2 Archive Id: %3 Service: %4 <p>e.g.<br> The number of items pending indexing for the archive has grown above the threshold limit. This service will pause for 5 minutes to allow the backlog to clear. <p> Mailbox: /o=ACME/ou=REO/cn=Recipients/cn=journal <br> Archive Name: Journal <br> Archive Id: 43ITR8E453A1ED611BE120002A58CDB441110000ACME.COM<br> Service: Enterprise Vault Journaling Service for ACMEEXCH1<br>

Failed to open distribution list [#London ACME IT].<br> Error: Access is denied. [0x80070005] LegacyDN: /o=ACME/ou=LDN/cn=Recipients/cn=?London ACME IT <br> Check that the vault administration account has the correct access rights to this distribution listUnable to find per user information in saveset. Item has been retrieved but some information may be incorrect. Your Enterprise Vault system should be checked for consistency. Contact your local KVS Support representative for further information. VaultID: %1 SavesetID: %2 The following message could not be archived by the Journaling Service because of its codepage. Title: %1 Mailbox: %2 No further attempts will be made to archive this message. The message has been moved to the 'Enterprise Vault Journaling Service\Failed Codepage nnn' folder, where nnn is the codepage number causing the failure. The following message could not be archived by the Journaling Service because of its codepage. Title: %1 Mailbox: %2 An error occurred whilst moving the message to the 'Enterprise Vault Journaling Service\Failed Codepage' folders. The message has been marked as "Do Not Archive", and no further attempts will be made to archive this message. The following message could not be archived by the Journaling Service because distribution list expansion failed. <p> Title: Script review<br> Mailbox: /o=ACME/ou=ZKO/cn=Recipients/cn=E2K <br> MAILBOXES/cn=STEWART <p> No further attempts will be made to archive this message. The message has been moved to the 'Enterprise Vault Journaling Service\Failed DL Expansion' folder.The following message could not be archived by the Journaling Service because distribution list expansion failed. Title: %1 Mailbox: %2 An error occurred whilst moving the message to the 'Enterprise Vault Journaling Service\Failed DL Expansion' folder. The message has been marked as "Do Not Archive", and no further attempts will be made to archive this message. An error occurred processing the external filter '%2'. No more filters will be processed. Error: %1 Mailbox: %3 Message Folder: %4 Message Title: %5 <p>e.g.<br> An error occurred processing the external filter 'KVS.Accelerator.PlugIn.Filter'. No more filters will be processed. <br> Error: No such interface supported [0x80004002] <br> Mailbox: /O=ACME/OU=ZKO/cn=Recipients/cn=Journal-ACME <br> Message Folder: ?Inbox <br> Message Title: Tournament <br><p>e.g.<br> The following message could not be processed by an external filter and has been moved to Journaling Service\Failed External Filter. <br> Mailbox: /O=ACME/OU=ZKO/cn=Recipients/cn=ACME-JOURNAL <br> Title: Tournament <Br> <br> No further attempts will be made to process this message. Mailbox: %1 Title: %2 No further attempts will be made to process this message.

Unable to send a 'Approaching Vault Quota Limit' notification message. Possible Reason: The message file could not be found. Please refer to 'Editing the Vault Quota Message' in the Administration Help for more information on editing and copying the enabled message file. Unable to send a 'Reached Vault Quota Limit' notification message. Possible Reason: The message file could not be found. Please refer to 'Editing the Vault Quota Message' in the Administration Help for more information on editing and copying the enabled message file.

The MAPI error MAPI_E_FAILONEPROVIDER (0x8004011D) has occurred whilst synchronizing the properties of mailbox /o=First Organization/ou=First Administrative Group/cn=Recipients/cn=testdisabled. The mailbox will not be synchronized until the next scheduled run. AgentExchSynch.cpp (CAgentExchSynch::OpenUserAndStore) [lines {1407,1414,1419,1423,1449,1455}] built Feb 11 13:30:13 2004

e.g. Could not filter a message for Accelerator random message sampling. <br> Error: No such interface supported [0x80004002] <br> Internal References: <br> Call error 0x80004002<br> Filter.cpp (CFilter::GetRecipientAuthorInfo) [lines {174,177,179,185,188,197}] built Mar 23 19:23:43 2004

e.g. A problem has occured while archiving a message. The archived item was not found or is no longer archive pending. Users mailbox dn: /o=ACME/ou=ZKO/cn=Remote Users/cn=DOWDEP Internal reference: CArchivingAgent::MakeItemPendingAndProcessMsg()

The MAPI error MAPI_E_FAILONEPROVIDER (0x8004011D) occurred when opening the mailbox message store during a synchronisation. This generally occurs when the mailbox has been deleted. For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp

The task '%1' failed to log on to Exchange server '%2' using mailbox '%3'. Please ensure that the server is running and that the Vault Service account has sufficient permissions on the server. <br>e.g.<br> The task 'Mailbox Archiving Task for ACME1' failed to log on to Exchange server 'ACME1' using mailbox 'EnterpriseVault-ACME1'. Please ensure that the server is running and that the Vault Service account has sufficient permissions on the server. The number of items pending indexing for the archive has grown above the threshold limit. This Task will pause for %1 minute(s) to allow the backlog to clear. Task: %5 Target: %2 Archive Name: %3 Archive Id: %4 For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp

There was a problem accessing a network service or resource. The dispenser will re-queue the current item and sleep for %1 minute(s). For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp

SMTP Mail Archiving encountered a serious error during initialization and is unable to operate correctly. Incoming messages will not be captured by Enterprise Vault and will be saved in the SMTP server 'drop' directory or relayed to another server. Please restart the IIS Admin service and reconfigure SMTP Mail Archiving. For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp SMTP Mail Archiving encountered a serious error resulting in the loss of a message. Last error: %1 Message ID: %2 Sender: %3 Recipients: %4 Last filename: %5 For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp SMTP Mail Archiving failed to save a captured message because the disk is full. Retry will occur every %1 seconds until the message is saved. This may result in a backlog of messages in the SMTP queue. Message ID: %2 Sender: %3 Recipients: %4 Last filename: %5 For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp SMTP Mail Archiving is continuing to attempt to save a message that failed because the disk is full. Retry will continue every %1 seconds until the message is saved. This may result in a backlog of messages in the SMTP queue. Message ID: %2 Sender: %3 Recipients: %4 Last filename: %5 For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp SMTP Mail Archiving has successfully saved a message that initially failed because the disk was full. Message ID: %1 Sender: %2 Recipients processed: %3 Last filename: %4 For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp SMTP Mail Archiving encountered a serious error and was unable to abort the transport of a captured message. The message will be saved in the SMTP server 'drop' directory or relayed to another SMTP server. Message ID: %1 Sender: %2 Recipients: %3 For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp SMTP Mail Archiving required a server-level default folder to save a captured message but one was not specified. The captured message will be deleted. Reconfigure SMTP Mail Archiving to use a server-level default folder. Message ID: %1 Sender: %2 Recipients: %3 For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp SMTP Mail Archiving reached the retry limit (%1) for a message that was not saved because the disk is full. The message will be deleted. Message ID: %2 Sender: %3 Recipients: %4 Last folder: %5 For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp SMTP Mail Archiving failed to load because a valid license key is not installed. Incoming messages will not be captured and will be delivered to the SMTP drop directory or relayed to another server. See the documentation for information on license keys. For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp

Failed to enable a user mailbox. The system reported 'An invalid directory pathname was passed', this may be because a new user or mailbox has not yet been fully initialized or an existing user or mailbox may have been recently deleted. Task: %2 Mailbox: %1 See the help topic called 'Problems enabling mailboxes' for details of the permissions you need to enable mailboxes. For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp Failed to enable a user mailbox. This could be due to insufficient permissions or the mailbox may have been deleted. Mailbox: %1 See the help topic called 'Problems enabling mailboxes' for details of the permissions you need to enable mailboxes. For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp Failed to disable a user mailbox. This could be due to insufficient permissions or the mailbox may have been deleted. Mailbox: %1 See the help topic called 'Problems enabling mailboxes' for details of the permissions you need to disable mailboxes. For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp The task controller cannot start the following MAPI-dependent tasks because the required version of MAPI is missing or incorrectly configured on the Enterprise Vault server: %1 To resolve the problem: 1. Stop all Enterprise Vault services and processes that are using MAPI. 2. Ensure that a version of MAPI supplied with Microsoft Outlook 2003 or later is installed and correctly configured on the Enterprise Vault server. 3. Restart the Enterprise Vault services. If the problem persists, see the "Troubleshooting" section of the Enterprise Vault Administration help file for guidelines on how to proceed. For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp Cannot start the task because MAPI is incorrectly configured on the Enterprise Vault server. See the "Troubleshooting" section of the Enterprise Vault Administration help file. For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp

The temporary transaction identifier cannot be read or written to a message. Archiving and external filtering may not be able to identify the message as a retry if it requires subsequent archive attempts. Error: %1 Internal References: %2 %3 For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp

<p>e.g.</p><font size="1"> <p><font size="2">Summary for shortcut deletion.</font></p> <p><font size="2">Mailbox: '/o=Enterprise/ou=MDH/cn=ADC/cn=Users/cn=Elwood Dowd':</font></p> <p><font size="2">Total number of shortcuts found: 5132</font></p> <p><font size="2">Number of expired shortcuts deleted: 157</font></p> <p><font size="2">Number of orphaned shortcuts deleted: 0</font></p> <p><font size="2">Number of old shortcuts deleted: 303</font></p> <p><font size="2">Total number of shortcuts remaining: 4672</font></p></font>Summary for shortcut deletion. Public folder '%1': Total number of shortcuts found: %2 Number of expired shortcuts deleted: %3 Number of orphaned shortcuts deleted: %4 Number of old shortcuts deleted: %5 Total number of shortcuts remaining: %6 For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp Enterprise Vault has detected an instance of mailbox DN reuse. Mailbox: %1 Default Vault Id: %2 Exchange Server: %3 Enterprise Vault detected that a mailbox enabled for archiving had been deleted from Exchange and another was subsequently created with the same DN. A fresh entry will be added to Enterprise Vault for the new mailbox. For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp The message being processed is not marked as pending archive and will not be archived. Mailbox: %1 Folder: %2 Subject: %3 Message Class: %4 For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp

There was an error applying a change to DeleteOriginal or CancelPending due to an External Filter policy change on the message. Mailbox: %1 Folder: %2 MessageSubject: %3 LogMessage: %4 For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp Mailbox Report Date: %1 System Name: %2 Mailbox Name: %3 Associated Account: %13 Policy: %28 Mailbox State: %20 Mailbox Quota Limit: %14 KB Mailbox Quota Used: %15 KB Percentage of Mailbox Quota free: %16 Number of archivable items in mailbox: %4 Total size of archivable items in mailbox: %5 KB Number of archivable folders in mailbox: %6 Number of items ready to archive: %7 Total size of items ready to archive: %8 KB Number of items that would be archived: %9 Total size of items that would be archived: %10 KB Number of expired shortcuts that would be deleted: %17 Number of orphaned shortcuts that would be deleted: %18 Number of old shortcuts that would be deleted: %19 Start Time: %11 End Time: %12 For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp Public Folder Report Date: %1 System Name: %2 Public Folder start point: %3 Policy: %23 Number of archivable items (from start point): %4 Total size of archivable items (from start point): %5 KB Number of folders processed: %6 Number of items ready to archive: %7 Total size of items ready to archive: %8 KB Number of items that would be archived: %9 Total size of items that would be archived: %10 KB Number of expired shortcuts that would be deleted: %13 Number of orphaned shortcuts that would be deleted: %14 Number of old shortcuts that would be deleted: %15 Start Time: %11 End Time: %12 For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp Mailbox Report Date: %5 System Name: %1 Mailbox Name: %2 Associated Account: %3 Policy: %12 Mailbox State: %4 Number of shortcuts where no action was taken: %11 Number of expired shortcuts that would be deleted: %8 Number of orphaned shortcuts that would be deleted: %9 Number of old shortcuts that would be deleted: %10 Start Time: %6 End Time: %7 For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp Public Folder Report Date: %3 System Name: %1 Public Folder start point: %2 Policy: %10 Number of shortcuts where no action was taken: %9 Number of expired shortcuts that would be deleted: %6 Number of orphaned shortcuts that would be deleted: %7 Number of old shortcuts that would be deleted: %8 Start Time: %4 End Time: %5 For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp

The archive task found mailboxes that have not been processed by the provisioning task. The archive task is ignoring these mailboxes. To log the names of these mailboxes to the event log, reset the 'HideMissingPolicyInfoErrors' registry value to 0. See the documentation for further details. Task: %1 For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp A new mailbox already has an entry in the Enterprise Vault database. New mailbox: %1 Existing entry: %2 Reason for conflict: %3 Set the SynchInMigrationMode registry value in order to process this mailbox. See the documentation for further details. For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp A new mailbox was linked to an existing entry in the Enterprise Vault database. New mailbox: %1 Existing entry: %2 Wait until the archive task has finished processing, then reset the SynchInMigrationMode registry value. See the documentation for further details. For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp A new entry in the Enterprise Vault database has been created for a new mailbox that had an existing entry in the database. The existing entry has been renamed. New mailbox: %1 Existing entry renamed to: %2 Reset the SyncInMigrationMode registry value after all affected mailboxes have been processed. See the documentation for further details. For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp This mailbox cannot be processed until the Exchange Provisioning Task has processed the corresponding user's details. Ensure that a Provisioning Group includes this user and run the Provisioning Task. For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp This mailbox already has an entry in the Enterprise Vault database. Set the SynchInMigrationMode registry value in order to process this mailbox. See the documentation for further details. For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp

Enterprise Vault could not enable a mailbox because either the Vault Store or Indexing Service were not specified. Ensure that both the Vault Store and Indexing Service are set on the Provisioning Group, the Exchange Server or the Enterprise Vault Server. Mailbox: %1 For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp Enterprise Vault cannot process this Exchange Server because none of the users on this server has been processed by the provisioning task. Do the following: 1. Ensure that provisioning groups have been defined. 2. Run the provisioning task. 3. Run mailbox synchronization/archiving again. Exchange Server: '%1' For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp This mailbox cannot be processed until the Exchange provisioning task has processed the corresponding user's details. Ensure that a provisioning group includes this user and run the provisioning task. To disable these warnings, set the 'HideMissingPolicyInfoErrors' registry value to 1. See the documentation for further details. Mailbox: %1 Message store: %2 For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp

A new mailbox was found containing Enterprise Vault settings for an existing entry in the Enterprise Vault database. The mailbox has not been linked to the existing entry. Use the 'zap' command in Policy Manager to remove the old Enterprise Vault settings. Mailbox: %1 For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp The Exchange Server %1 is running Exchange Server version 5.5. This version of Exchange Server is not supported by Enterprise Vault. The task will shut down. For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp Failed to determine the provisioning group for the mailbox %2. This mailbox cannot be processed until the Exchange provisioning task has processed the corresponding user's details. Ensure that a provisioning group includes this user and then run the provisioning task. Error: %1 For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp A delay occurred whilst enabling archiving for the mailbox %1 Mailboxes cannot be enabled while the Storage Service state is 'Stopped' or 'Upgrading' or when it is in read-only mode. For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp

This message could not be archived due to it having a conflicting Transaction Id. The conflicting Transaction Id has been removed from the message which will now allow it to be successfully archived on the next archiving run. Item MSMQ Label: %1 For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp The nEVDominoHousekeeping process is shutting down because it is not running under the Enterprise Vault Service Account. Restart the Enterprise Vault Domino Server using the Vault Service account. For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp

<p>e.g.</p> <p>There were too few archivable items available to take mailbox '/O=ACMEOU=ZKO/cn=Recipients/cn=Dowdp' below the quota-free level of 10%.</p> <div>&nbsp;&nbsp;Quota limit: 200000 KB &nbsp;&nbsp;Quota used: 339062 KB (169% of Quota limit) &nbsp;&nbsp;Required to archive: 158000 KB &nbsp;&nbsp;Actual amount archived: 167 KB</div> <div>&nbsp;You may need to review your mailbox archiving policies to allow more items to be archived if you regularly see this warning for mailboxes.</div>Failed to find configuration information for the %1 Agent in the Directory Service on computer %2 This could be because the Task was deleted before completing all its outstanding work. Task entry id: %3 Further instances of this error will be suppressed. For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp Public folder redirection has been detected. This configuration can adversely affect performance and reliability. This redirection could be either of the following: -The mailbox that is being used to connect to Exchange Server is being redirected to another Exchange Server. -The Public Folder store is not homed locally on the target Exchange Server Exchange Server: %1 Public Folder Task: %2 Redirected to Server: %3 For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp

The following message could not be archived as it seems to have an invalid envelope body. Title: %1 Mailbox: %2 No further attempts will be made to archive this message. The message has been moved to the 'Enterprise Vault Journaling Service\Failed to Copy' folder. For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp The following message could not be archived by the Journaling Service as it seems to have an invalid envelope body. Title: %1 Mailbox: %2 An error occurred whilst moving the message to the 'Enterprise Vault Journaling Service\Failed to Copy' folder. The message has been marked as "Do Not Archive", and no further attempts will be made to archive this message. For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp

The following envelope message could not be archived as the attached message does not appear valid. Title: %1 Mailbox: %2 No further attempts will be made to archive this message. The message has been moved to the 'Enterprise Vault Journaling Service\Failed to Copy' folder. For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp The following envelope message could not be archived as the attached message does not appear valid. Title: %1 Mailbox: %2 An error occurred whilst moving the message to the 'Enterprise Vault Journaling Service\Failed to Copy' folder. The message has been marked as "Do Not Archive", and no further attempts will be made to archive this message. For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp

(To disable these warnings, use the 'HideMovedItemUpdateFailure' registry value. See the documentation for details.) The following item has been moved in the mailbox but it could not be updated in the archive: Mailbox: %2 Folder: %3 Title: %4 Archive folder updated: %5 Retention Category updated: %6 Reason: %1 For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp There were too few archivable items available to take mailbox '%1' below the quota-free level of %2%. Quota limit: %3KB Quota used: %4KB (%5% of quota limit) Previously archived (pending): %8KB Required to archive: %6KB (adjusted %9KB) Amount archived (this run): %7KB You may need to review your mailbox archiving policies to allow more items to be archived if you regularly see this warning for mailboxes. For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp

(To disable these warnings, use the 'HideMovedItemUpdateFailure' registry value. See the documentation for details.) The following item has been copied in the mailbox but it could not be updated in the archive: Mailbox: %2 Folder: %3 Title: %4 Reason: %1 For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp The following message could not be archived by the Journal Task as it may be corrupt. Title: %1 Task: %2 Mailbox: %3 Number of corrupt Journal mailbox messages currently identified: %4 The message cannot be moved to the 'Enterprise Vault Journaling Service\Invalid Journal Report' folder and also cannot be marked as "Do Not Archive". For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp

CArchivingAgent::ProcessShortcutUpdate() Mailbox does not exist. The mailbox may have been deleted. Mailbox: %1 Error: %2 For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp CArchivingAgent::ProcessShortcutUpdate() Could not open mailbox to update shortcuts. The shortcut update will be tried again. Mailbox: %1 Error: MAPI_E_NETWORK_ERROR For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp

Could not retrieve the ArchiveFolderID values. The archive might have been deleted. Shortcut processing aborted. Mailbox: %1 ArchiveID: %2 For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp The shortcut update task could not log on to the Exchange server. Ensure that the mailbox is not hidden, that the server is running and that the Vault Service account has sufficient permissions on the server. Exchange Server: %1 Mailbox: %2 Error: %3 For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp

Could not retrieve folder property values for shortcut update. See the move archive log for details. Mailbox: %1 Folder: %2 Property: %3 Error: %4 For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp

Failed to post the shortcut update message to the MSMQ queue. Run the archiving task again to start shortcut update. Mailbox: %1 Error: %2 For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp The mailbox is locked by another operation. The move archive shortcut update request will be reposted to the end of the MSMQ queue. Mailbox: %1 For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp

Could not update shortcut. The archiving task cannot process one or more shortcuts to items that have been migrated from Domino. The RestoreShortcutBody registry value is set. This registry value makes the archiving task rebuild Enterprise Vault shortcuts for Exchange Server messages and shortcuts to items that have been migrated from Domino. The archiving task cannot initialize the Lotus Notes runtime in order to process items that have been migrated from Domino. Check that Lotus Notes is correctly installed on the server that is running the archiving task. Exchange Server shortcuts can be processed correctly. For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp Cannot process the mailbox until it has been re-provisioned. The following user object was not found in Active Directory, it may be that the user object has been moved or deleted. AD Object: %1 Legacy DN: %2 For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp

The author or recipient information is not available. It was not possible to process the message. Task: %1 Message Title: %2 Mailbox DN: %3 For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp The task failed to log on to the Exchange Server. The task is running as a Windows user that is a member of the 'domain admins' group. Remove the user from this group to ensure that the task has sufficient access to the Exchange Server. Task: %1 Exchange Server: %2 Windows user: %3 For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp

Example:<p> Enterprise Vault Indexing Service Service startup is delayed pending service synchronization <p> The service depends on one or more Enterprise Vault services and is waiting until they are all fully operational. Service startup will fail if service synchronization takes longer than 30 minutes. Note that the Services Control Panel dialog box will show this service as running even though it is not fully operational <p> The most likely cause of the delay is that the Directory service is not running Example:<p> Enterprise Vault Indexing Service Service startup is continuing following completion of service synchronization <p> The service depends on one or more Enterprise Vault services and had to wait for those services to become fully operational %1 Startup is being canceled due to failure of service synchronization The service depends on one or more Enterprise Vault services that have not become fully operational during the service synchronization period The most likely cause of the failure is that the Directory service is not running <br>e.g.<br> Enterprise Vault Public Folder Service - ACME IT is being canceled due to failure of service synchronization The service depends on one or more Enterprise Vault services that have not become fully operational during the service synchronization period. <br> The most likely cause of the failure is that the Directory service is not running

Failed to grant the %1 user rights to the Vault Site Account %2. It may be possible to add this user right manually. Make sure that the Vault Site Account has the "Act as part of the operating system" and "Log on as a service" advanced user rights on the computer %3. Please use the User Manager for Domains utility to do this.

%1 Unable to synchronize with an Enterprise Vault Service. The service is not present in the target computer's NT Services configuration. The Enterprise Vault site may not be fully configured, or the service may have been deleted from the NT Services configuration. Computer: %2 Service database name: %3 Configuration of the Enterprise Vault site should be completed prior to starting this Enterprise Vault service. %1 Unable to synchronize with the Enterprise Vault Indexing Service. There are no Indexing Services configured in the Enterprise Vault site. The Enterprise Vault site may not be fully configured, or the Indexing Services may have been deleted Configuration of the Enterprise Vault site should be completed prior to starting this Enterprise Vault service

The system is running out of diskspace on drive %1 - delete any unwanted files Enterprise Vault will be shutdown when %2% of the diskspace is used <br>For example:<br> The system is running out of diskspace on drive G: - delete any unwanted files Enterprise Vault will be shutdown when 99% of the diskspace is used

The %1 service failed to respond to the STOP request in a timely manner. This may be due to the service getting insufficient CPU time; check subsequent event log entries for a "successfully stopped" message. If the service is still running, manually stop the service and check the event log for any errors logged by the service. <br>e.g.<br> The Enterprise Vault Archiving Service for ACMEEXCH1 service failed to respond to the STOP request in a timely manner. This may be due to the service getting insufficient CPU time; check subsequent event log entries for a "successfully stopped" message. If the service is still running, manually stop the service and check the event log for any errors logged by the service.

Your license file is invalid (contents corrupt) If the license file was created manually, please double check that the license details were entered correctly and not mis-typed. Otherwise, replace the license file with the one supplied to you, (for example from a backup) Enterprise Vault will continue, but with reduced functionality Your license file is not valid for this system (wrong HOSTID) Your license file is locked to a particular system, and is only valid on that system. If the license file was created manually, please double check that the license details are for this system. Otherwise, replace the license file with the one supplied to you for this system Enterprise Vault will continue, but with reduced functionality Please contact your license supplier to obtain a valid license An unhandled exception has been raised. Command Line: %1 Process Id: %2 Thread Id: %3 Exception Id: %4 Instruction Address: %5 Stack Trace: %6 Stack Trace(basic): %7 Registers: %8 An exception is raised when a process encounters an unexpected fault. Contact your support representative with details of this and any preceding errors. An unhandled access violation has occurred. <p> Command Line: "C:\Program Files\Enterprise Vault\{server executable}" <br> Process Id: %2<br> Thread Id: %3<br> Exception Id: %4<br> Instruction Address: %5<br> Memory Access Type: %6<br> Memory Address: %7<br> Stack Trace: %8 Stack Trace(basic): %9 Registers: %10 <p> The process has attempted to access a protected memory address. Contact your support representative with details of this and any preceding errors. An exception has been raised. Internal reference %1 %2 An exception is raised when a process encounters an unexpected fault. Contact your support representative with details of this and any preceding errors. <BR>e.g.<br> An exception has been raised. <br> Internal reference Filter.cpp (CFilter::FinalConstruct) [lines {27,31}] built Jun 17 15:39:02 2004 <br> An exception is raised when a process encounters an unexpected fault. Contact your support representative with details of this and any preceding errors.

An exception has occurred in the Memory Mapped Stream object Name: %2 Type: %3 Reference: %4 Reason: %1 <br>e.g.<br> An exception has occurred in the Memory Mapped Stream object <br> Name: C$6$SRC<br> Type: e <br> Reference: "R" <br> Reason: Catastrophic failure [0x8000ffff] <br>

A C Runtime debug report has been raised. Report Type: %1 Report: %2 Process Id: %3 Command Line: %4 NOTE: The process may be hung awaiting user response to a Windows message box. If the process is not running under the same user account as the current desktop then the message box may not be visible. In this situation it may be possible to investigate the error that generated the debug report by attaching a debugger to the process.

There have been more than %1 Errors in the last %2 seconds, of which %3% or more are from Enterprise Vault. Enterprise Vault will now shut down. <br>For example:<br> There have been more than 10000 Errors in the last 7200 seconds, of which 90% or more are from Enterprise Vault. Enterprise Vault will now shut down. Vault Store: %1 No Partition for this Vault Store. Archiving to this Vault Store is not possible until Partition created. Facility: %2 Internal Reference: [%3]<br>e.g.<br> Vault Store: CenteraStore No Partition for this Vault Store. Archiving to this Vault Store is not possible until Partition created. Facility: Vault Administration Console Internal Reference: [VAC/NVS1]

An error occurred while attempting to read a value from a performance counter: Object: %1 Counter: %2 Instance: %3 Handle: %4 Error: %5. <br> e.g.<br> An error occurred while attempting to read a value from a performance counter: <br> Object: Memory <br> Counter: % Committed Bytes In Use <br> Instance: Handle: 0x00000000<br> Error: 0xC0000BBC. <br>

An error occurred in the thread control the Enterprise Vault .NET server processes Error: %1 Reference: %2 Additional Info: %3 %4 The Enterprise Vault .NET server processes can be restarted by pausing and resuming the Enterprise Vault Admin Service.

The system is running out of diskspace on drive %1 - delete any unwanted files Enterprise Vault will be shutdown when less than %2 Mb of diskspace remains For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp The system is running out of diskspace - delete any unwanted files Enterprise Vault will be shutdown when less than %1 Mb of diskspace remains For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp The system is running out of diskspace on drives %1 and %2 - delete any unwanted files Enterprise Vault will be shutdown when less than %3 Mb of diskspace remains For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp

Enterprise Vault Event Log is full. Events will be written into the Application Event Log until space is available in the Enterprise Vault Event Log. For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp Enterprise Vault Converters Event Log is full. Events will be written into the Application Event Log until space is available in the Enterprise Vault Converters Event Log. For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp

The register of items is full and has been purged to make space. Register: %1 This may result in items that cannot be processed due to repeated errors taking several more attempts before processing is abandoned. For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp Due to an internal error the facility to limit attempts to abandon items that cause repeated failures has been disabled. Reason: %1 Register: %2 Reference: %3 This may result in items that cannot be processed due to repeated errors blocking processing of other items. For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp

The process has been terminated because of a buffer overflow. Command Line: %1 Process Id: %2 Thread Id: %3 Stack Trace: %4 Stack Trace (basic): %5 For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp Enterprise Vault is configured in a cluster. You must use the cluster software to bring the service online. The service cannot be started using the Windows Service Control Manager. The service will now stop. For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp

License checking has identified that you currently do not have any licensed features. Please contact your license supplier to obtain a new license. For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp

Required license not installed. An Enterprise Vault license is required for the following feature but the license is not installed: Feature: %1 Feature Code: %2 %3 See the 'Installing and Configuring' manual for information about licenses. For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp

Required license not active. An Enterprise Vault license is required for the following feature but the installed license is not currently active: Feature: %1 Feature Code: %2 %3 See the 'Installing and Configuring' manual for information about licenses. For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp

Failed to handle delay loading of EVRT.dll (Review and correct list of EVRT.dll routines in the EVRTProxy namespace in EVStgAPI.cpp) For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp

Authentication is currently being delayed due to a suspected brute-force attack. Number of failures: %1 Delay period remaining: %2 (mins:secs) During this period users will experience short delays when searching or accessing archived items. For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp

Enterprise Vault could not initialize the Lotus Notes runtime. Ensure that the Notes client is installed on this computer and restart the Admin Service. For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp An unsupported version of Microsoft Outlook is installed on this server. All services and tasks will continue to run but you may experience issues during archiving and retrieving of Exchange Server items. Installed Outlook version: %1 Refer to the compatibility charts for supported versions. http://entsupport.symantec.com/docs/276547 For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp Vault Store Group: %1 There are no Vault Stores in this Vault Store Group. Archiving to this Vault Store Group will not be possible until a Vault Store is created. Facility: %2 Internal Reference: [%3] For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp

Attempted to stop all active requests in the thread pool (InstanceId = [%1]). Total active requests attempted to be stopped = [%2]. Total pending requests removed from the thread pool = [%3]. For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp

Thread pool (InstanceId = [%1]) can not support requested [%2] threads. Maximum [%3] threads are allowed. Thread pool will not be created. For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp

Microsoft Outlook is installed but is not the default mail client. Configure Microsoft Outlook to be the default mail client. See the requirements for Exchange Server archiving in 'Installing and Configuring'. For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp

Failed to update the restoration status of an item in a basket, due to it being locked. This can sometimes happen when restoring large baskets and does not cause any harm. The Retrieval Agent will keep trying until the basket becomes unlocked.

A COM exception occurred while verifying a mailbox's distinguished name. %tSource: %1 %tDescription: %2 This could be the result of undetected problems occurring when CDO.DLL was installed. <br>e.g.<br> A COM exception occurred while verifying a mailbox's distinguished name.<br> Source: Collaboration Data Objects<BR> Description: [Collaboration Data Objects - [MAPI_E_UNCONFIGURED(8004011C)]]

This Enterprise Vault server is running in a building blocks environment and is hosting another Enterprise Vault server. The Shopping Service data file locations for the following Enterprise Vault servers do not match: %2: %3 %4: %5 Please set these locations to be the same and restart the Shopping Service. For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp The Shopping Service cannot perform the requested MAPI dependent operation because the required version of MAPI is missing or incorrectly configured on the Enterprise Vault server: To resolve the problem: 1. Stop all Enterprise Vault services and processes that are using MAPI. 2. Ensure that a version of MAPI supplied with Microsoft Outlook 2003 or later is installed and correctly configured on the Enterprise Vault server. 3. Restart the Enterprise Vault services. If the problem persists, see the "Troubleshooting" section of the Enterprise Vault Administration help file for guidelines on how to proceed. For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp

Error opening saveset file Reason: %1 File: %2 <br>e.g.<br> Error opening saveset file <br> Reason: A device attached to the system is not functioning. [0x8007001f] <br> File: G:\Enterprise Vault Stores\ACMESTORE1\2002\09\05\11\321564000000000~200209051146190000~0.DVS

Failed to inform the %2 Service of successful storage of a Saveset in a Vault Store. Reason: %1 <br>e.g.<br> Failed to inform the Agent (18C4A4BCB9D6B324A96D897BF9B031E5A1110000XXXXXX.XXXX.XXX) Service of successful storage of a Saveset in a Vault Store. Reason: Failed to calculate the service entry table, unrecognized service entryID [0xc0040901]

e.g.<br> Unable to fetch item from "vault.acme.com", if an HSM is being used check that it is running <br> Access denied [0xc0041801] <br> Saveset Id: 311041000000000~200212042221590000~0~66AD4FB4129B4F36BA16D58406169F3 <br> Vault Id: 15DE4123YA375D511838800508B319C691110000vault.acme.com <br> Reference: [GOS]

No entry for Vault in Vault Directory<br> Vault Id:<br> 1BD1B1AF49AD8D311ACEE00508B070AE51110000huyton.zko.dec.com <br> An attempt was made to read information for a Vault that does not have an entry in the Directory. This may indicate an inconsistency in the Vault Directory

Error reading the Storage Service Entry %2 from the Vault Directory %1 <br>e.g.<br> Error reading the Storage Service Entry 1F9412SA111CA3A4184E92EF5C1EBFE9C1e10000vault.acme.com from the Vault Directory Access is denied [0x80070005]

Error from StorageRestore: Error reading SavesetInformation SavesetID: %1 VaultID: %2 VaultStoreID: %3 <br>e.g.<br> Error from StorageRestore:<br> Error reading SavesetInformation<br> SavesetID: 111000000000000~200301230334000000~0~7E05C9441C664C7C97DB41695CB764F<br> VaultID: 1F701BDD1B125EF4AA74A0BD18CA0D46D1110000acme.com<br> VaultStoreID: 196667B5FEBDAD3119CAB00508B070AE51210000acme.com

Error from StorageRestore: Saveset entry not found in SavesetInformation table SavesetID: %1 VaultID: %2 VaultStoreID: %3 <br>e.g.<br> Error from StorageRestore:<br> Saveset entry not found in SavesetInformation table<Br> SavesetID: 412313000000000~200303230956500000~0~896076EB73A6418FBA64A62196F604B<br> VaultID: 541954128021F7346AC667DAFB5D4A08B1110000vault.acme.com<br> VaultStoreID: 192696B383B8AD4119CE200508B070AE51210000vault.acme.com <br>

Error opening MSMQ Dead Letter Queue - Access is denied for queue %1 Using MSMQ Explorer, edit the permissions of the Computer on which the queue resides. Ensure that the local Administrators group has "Full Control" access. The computer properties to modify will be those of the system on which this error is logged. This can be verified by checking that the ID of the computer (displayed within the General tab of the Computer properties) corresponds with the queue name within this message.

MSMQ negative acknowledgment message(s) have been handled. Queue:%1 Reason: Time to reach queue has expired <br>e.g.<br> MSMQ negative acknowledgment message(s) have been handled. Queue:.\private$\Enterprise Vault Restore Spool Admin Queue Reason: Time to reach queue has expired

MSMQ negative acknowledgment message(s) have been handled. Queue:%1 Reason: The sender does not have send access rights on the queue. <br>e.g.<br> MSMQ negative acknowledgment message(s) have been handled. Queue:.\private$\Enterprise Vault Archive Agent Admin Queue Reason: The sender does not have send access rights on the queue.

<p>MSMQ negative acknowledgment message(s) have been handled. Queue:%1 Reason: Time to receive has expired, while the message is in the queue </p> <p>e.g.MSMQ negative acknowledgment message(s) have been handled.<br />Queue:.\private$\Enterprise Vault Restore Spool Admin Queue<br />Reason: Time to receive has expired, while the message is in the queue<br /></p>

Failed to initialize access to the Storage database. Reason: %1 This may be due to one of: - Failure to initialize MAPI - Failure to open the IPersistentStorageContext interface to the PersistentStorageContext Class COM component - Failure to open the IStorageDBObject interface to the StorageDBObject Class COM component

Error returned from ReadDirectoryChangesW in wait thread for partition "KVS Part1"<p> A possible cause is that the partition is on a network drive <p> FileWatch will continue but there may be a delay in removing safety copies from mailboxes after the Vault Store has been backed up.

An unexpected timeout occurred while attempting to access a queued message. This may have occurred because a message was not on a queue as expected or because the system is heavily loaded, thus causing excessive MSMQ delays. If you suspect the problem is caused by MSMQ delays, try increasing the Enterprise Vault "QueueTimeout" registry value, as described in the "Modifying Registry Settings" section in the Troubleshooting section of the Administrator help.

The StorageFileWatch process for Storage Service %1 is exiting because there are no eligible Vault Stores. Vault Stores are ineligible if: - Remove safety copies from mailbox is 'Never' - Status is not 'Available' - Schema version is not supported

Example<br> Starting update of Vault Index with Storage transactions from 1 to 1419 <p> Vault: Elwood P. Dowd <br> Vault Id: <br> 1443908890DE8CB4EBA827EEAC6A448281110000huyton.zko.acme.com <br> Vault Store: Support FSA <br> Vault Store Id: <br> 1477079532F2AD1469D0738D09C78B4E81210000huyton.zko.acme.com <p> NOTE: Index additions will use the common index elements currently stored in the archived item.

Example<br> Completed update of Vault Index with Storage transactions 13420 to 13450 <p> Vault: Elwood Dowd<br> Vault Id: 1331838A6A86ECD489B8B202FF17B65801110000acme.com<br> Vault Store: ZKO <br> Vault Store Id: 14962C1A68D4E4411838400508B319C691210000acme.com <br> Elapsed Time: 0:0:10 (hours:minutes:seconds)<br> Number of index additions replayed: 30<br> Number of index deletions replayed: 0<br>

Error accessing a Saveset file Reason: %1 Saveset Id: %2 Vault: %3 Vault Id: %4 Reference: %5 <br>e.g.<br> Error accessing a Saveset file Reason: EMC Centera C-Clip contains incorrect Saveset Pool Address: ClipId: Expected: VaultStoreId: VaultId: SavesetId: Received: VaultStoreId: VaultId: SavesetId: [0xc0041a6b] Saveset Id: 441441000000000~200402050749290000~0~3E07C297FC0E4ACB961D6F17D06FB30 Vault: Dowd Elwood Vault Id: 125RE7T5K395ED94FAC9B99FDA89A0AB41110000ACMEVAULT.COM Reference: VSOP

Lost index operations have been detected. The loss has been ignored, and is assumed to be the result of restoring an old database from backup. %1 missing index operations were detected. [Internal reference %3] <br>e.g.<br> Lost index operations have been detected.<br> The loss has been ignored, and is assumed to be the result of restoring an old database from backup.<br> 162 missing index operations were detected.<br> [VaultId = 23T65YH431F653841B1401266A4093F861110000acmevault]<br> [Internal reference CCUAU]

A failure occurred attempting to delete completed JournalArchive records from a Vault Store database. Indexing Service Sequence number = %2 Vault Id = %3 Vault Store = %4 No action is necessary. The records will remain in the database until the next attempt to delete completed JournalArchive records. A failure occurred attempting to update JournalArchive records in a Vault Store database. Indexing Service Sequence number = %2 Vault Id = %3 Vault Store = %4 No action is necessary. The records will remain in the database until the next attempt to update JournalArchive records. A failure occurred attempting to delete completed JournalDelete records from a Vault Store database. Indexing Service Sequence number = %2 Vault Id = %3 Vault Store = %4 No action is necessary. The records will remain in the database until the next attempt to delete completed JournalDelete records.

Error from document conversion: Vault ID: %2 %3 %1 <br>e.g.<br> Error from document conversion: Vault ID: 125123243D2C94D4A9B8920E51C1019501110000acme.com Saveset Message for Mailbox /O=ACME/OU=ZKO/CN=RECIPIENTS/CN=DOWDEP, Message titled: Rabbits The parameter is incorrect. [0x80070057]

Invalid Saveset file. Error: %1 File: %2 If an HSM is being used check that it is running. <br>e.g.<br> Invalid Saveset file. <br> Error: Saveset decompression failed. Error: Context: [0xc0041aa7] <br> File: E:\Enterprise Vault Stores\IT\2004\02\10\10\341200000000000~200402101018030000~0.DVS <br> If an HSM is being used check that it is running. An exception has occurred. A StorageArchive SavesetReceive thread has aborted: %1 [Internal reference %2] <br>e.g.<br> An exception has occurred. <br> A StorageArchive SavesetReceive thread has aborted: Unspecified error [0x80004005] [Internal reference SARE]

Archive operation canceled because Saveset file is missing. [Vault Store: %1] [Vault ID: %2] [Saveset Filename: %3] [Transaction ID: %4] <br>e.g.<br> Archive operation canceled because Saveset file is missing.<br> [Vault Store: First Partition] <br> [Vault ID: 43T6Y5DEEB3CC0408395AABB97A970611110000ACMEVAULT]<br> [Saveset Filename: E:\Enterprise Vault Stores\ZKO\2003\04\18\00\313000000000000~200304180015030000~0.DVS] <br> [Transaction ID: 5921E4E294894B97BA52B4B70DB2266]

Storage Restore was unable to recall or access file: %2 %1 <br>e.g.<br> Storage Restore was unable to recall or access file: F:\Enterprise Vault Stores\ACMESTORE1\2002\11\05\13\412310000000000~200211051300410000~0.DVS A device attached to the system is not functioning. [0x8007001f]

Failure waiting for system resource [Internal Reference %2] Reason:%1 Contact your support representative <br>e.g.<br> Failure waiting for system resource<br> [Internal Reference FWW] <br> Reason:The operation completed successfully. [0] <br> Contact your support representative Saveset file unavailable. Saveset Id: %1 Vault: %2 Vault Id: %3 <p>e.g.<br> Saveset file unavailable.<br> Saveset Id: 930000000000000~200303112451060000~0~31A94F30354D4EEDB886E577DDEFBD4 <br> Vault: Elwood P Dowd <br> Vault Id: 1F9C2C53C39777349B20EEFF4387D6BC11110000acme.com <br>Failed to open Queue: %2 Queue FormatName: %3 %1<br>e.g.<br> Failed to open Queue: Enterprise Vault Storage Archive Queue Queue FormatName: PRIVATE=91b6a6e2-5d35-4834-8917-e7d986e0fc29\00000010 Unable to establish a connection with Active Directory. Verify there are sufficient permissions to perform this operation. [0xc00e0013]

The Storage Service is shutting down due to a persistent error in one of the service's components. Component: %1 Check previous entries in the error log and restart the storage service after the problem has been identified and corrected Item content will not be indexed. Message Id: %1 Label: %2 Previous attempts to archive the item have failed or been interrupted. This item will be archived without a preview being available to the web application and the content will not be indexed. It is not possible to search on the content but the item can be restored as normal Item archive abandoning Message Id: %1 Label: %2 All previous attempts to archive the item have failed or been interrupted. To prevent further failures the item will not be archived. It is probable that the item will remain as 'pending archive' in the user's mailbox. <br>e.g.<br> Item archive abandoning <br> Message Id: {484HFDSY-743B-4410-8D1C-JF6064709ABE}\9543830 <br> Label: Saveset Message for Mailbox /o=ACME/ou=Messaging Administrative Group/cn=Recipients/cn=DowdP, Message titled: MessageTitle <br> All previous attempts to archive the item have failed or been interrupted. To prevent further failures the item will not be archived. It is probable that the item will remain as 'pending archive' in the user's mailbox.

The Archive is currently unavailable. Archive Name: %1 Vault Id: %2 Reference: %3 Possible reasons include the Archive's index is being updated, the Archive is reserved exclusively for bulk archiving (such as PST migration) or the Archive is being deleted

Unable to set Vault status to unavailable in the Directory Vault Id: %1 Operation is continuing though some applications, such as the web application, may seem to allow access to the Vault. However actions such as attempting to delete items from the Vault will fail because the Vault is not currently available

PST Migration Report Migration status: %1 PST file: %2 Archive Name: %3 Vault Id: %4 Number of folders processed: %5 Number of items archived: %6 Total size of items archived: %7 KB Number of items unable to be archived: %8 Start Time: %9 End Time: %10 Unexpected MAPI error encountered Error: %1 Component: %2 Reference: %3<br>e.g.<br> Error: The file D:\user1.pst is not compatible with this version of the Personal Folders information service. Contact your administrator. <br> Component: Personal Folders <br> Reference: CPSTHelper::ConfigurePST/CMS1

e.g.<br> Storage Expiry Report <p> Vault Store Name: Vault Store 5 <br> Vault Store Id: 108059CA5FF8E724187568F7C863FCA6F1210000acme.kvsvault.com <p> Number of vaults processed: 7 <br> Number of vaults enabled for expiry: 7 <br> Total number of expired items deleted: 0 <br> <p> Items were deleted with the following retention categories: (none) <p> No items were deleted with the following retention categories: <br> PST (119988 months). Miscellaneous (12 months). Public (119988 months). Business (119988 months). Uncategorized (9999 years). Sent Items (119988 months). Deleted Items (3 months). Personal (60 months). <p> Expiry based on archived date <p> Start Time: 15/02/2004 12:00 <br> End Time: 15/02/2004 12:00Failed to process all expired items in Vault. %1 Vault Name: %2 Vault Id: %3 <br>e.g.<br> Failed to process all expired items in Vault. <br> Error Could not delete a saveset [0xc004188b]<br> Vault Name: Elwood P Dowd <br> Vault Id: 54DJ4431Q37022E458AD5452578FA566D1110000zko.acme.com Failed to process all expired items in Vault Store. %1 Vault Store Name: %2 Vault Store Id: %3 <br>e.g.<br> Failed to process all expired items in Vault Store. Unable to Create Connection [0xc004340e] Vault Store Name: ACMEStore Vault Store Id: 56RTJ34MS2F1FE649915862E2B4C9390B1210000vault.acme.com

Storage Expiry Report (Report Mode) Vault Store Name: %1 Vault Store Id: %2 Number of vaults processed: %3 Number of vaults enabled for expiry: %4 Total number of expired items: %5 Items have expired with the following retention categories: %10 No items have expired with the following retention categories: %11 Expiry based on %12 Start Time: %6 %7 End Time: %8 %9

This is an example. Some details will be different<br> Unable to convert item content <p> Reason: Unspecified error [0x80004005] <br> Supplementary Info: Unknown converter error (0) <p> Item: Saveset Message for Mailbox /O=ACME/OU=ZKO/CN=RECIPIENTS/CN=DOWDP, Message titled: Invoice Subject: Invoices <br> Attachment: invoice1.pdf<br> Type: pdf <br> This item will be archived without a preview being available to the web application and the content will not be indexed. It is not possible to search on the content but the item can be restored as normal**This is an example. Some details may be different**<p> Unable to convert item content to HTML. The content has been converted to text<p> Reason: The requested allocation size was too large [0x80080011] Supplementary Info: <p> Item: SA:FSA-7C02A898D9FCBE26F617C3C20429F7A7--1751237826 Subject: hlog.zip <br> Attachment: <br> Type: zip <br> <p> The content of this item failed conversion to HTML but has been successfully converted to text. The item will be archived normally but the preview available in the web application will be text rather than HTML

Corrupt Storage Archive MSMQ queue entry discarded. Message Id: %1 Label: %2 Buffer for uncompressed data: %3 bytes Compressed data size: %4 bytes To prevent further failures the item will not be archived. It is probable that the item will remain as 'pending archive' in the user's mailbox.

Delete Vault failed Reason: %1 Vault Name: %2 Vault Store: %4 Vault Id: %3 <br>e.g.<br> Delete Vault failed <br> Reason: Access is denied. [0x80070005] <br> Vault Name: Elwood Dowd Vault Store: Main Store Vault Id: 1REFASDFASD48DA46B6419F7163BA80C31110000vault.acme.com

e.g.<br> Update of Vault Index completed processing Storage transactions from 28898 to 38898. Continuing... <br> Vault: Elwood Dowd <Br> Vault Id: 12T63123FEBDAD3119CAB00508B070AE51110000vault.acme.com <br> Vault Store: Production <br> Vault Store Id: 114TRG6WFEBDAD3119CAB00508B070AE51210000vault.acme.com

Archive has been deleted Archive Name: %1 Vault Store: %3 Archive Id: %2 <br>e.g.<br> Archive has been deleted <p> Archive Name: Dowd, Elwood <br> Vault Store: ACMESTORE1 <br> Archive Id: 5R412WQGT6CABC6408992087E9929AC071110000Evault.acme.com

%1 (%2) - Restarting failed process PID: %3 Exit Code: %4 The process has failed abnormally and will be restarted automatically <p> e.g.<br> Storage Archive Server (3) - Restarting failed process <p> The process has failed abnormally and will be restarted automatically %1 (%2) - Process failed PID: %3 Exit Code: %4 The process has failed abnormally and will not be restarted. Either the process has exceeded its restart count or automatic restart is disabled. The process can be restarted by stopping and restarting the Storage Service <br>For example:<br> Storage Archive Server (6) - Process failed <br> PID: 0 <br> Exit Code: Unspecified error [0x80004005] <br> <br> The process has failed abnormally and will not be restarted. Either the process has exceeded its restart count or automatic restart is disabled. The process can be restarted by stopping and restarting the Storage Service Error starting process Reason: %1 Process: %2 (%3) Reference: %4 <br>e.g.<br> Error starting process <br> Reason: The server process could not be started because the configured identity is incorrect. Check the username and password. [0x8000401a] <br> Process: Storage Archive Server (6) <br> Reference: RunTheProcess/CCI <br>

File I/O Function error: Reason: %1 Path: %2 Reference: %3 <p>e.g.<br> File I/O Function error: Reason: There is not enough space on the disk. [0x80070070] Path: E:\Enterprise Vault Stores\Journal\2003\03\21\09\313000000000000~200304233114110000~0.DVS Reference: VSIS5

Error occurred issuing job progress update. Reason: %1 Reference: %2 Migration will continue but further job progress updates for the current PST may not be possible. Job progress updates will be re-established upon processing the next PST.

Unable to access Indexing Service on %1 Check that the Indexing Service is running. The process will automatically continue normal operation as soon as the Indexing Service becomes available. <br>e.g.<br>Unable to access Indexing Service on acmevault.acme.com <br> Check that the Indexing Service is running. The process will automatically continue normal operation as soon as the Indexing Service becomes available.

%1 (%2) - Process stopped PID: %3 Exit Code: %4 The process has stopped due to an unrecoverable error and will not be restarted. Check the event log for previous errors. Once the problem has been resolved the process can be restarted by stopping and restarting the Storage Service

Exchange Server mailbox access error occurred Exchange Server: %1 Exchange Privileged Mailbox: %2 Mailbox DN: %3 Reference: %4 <br>e.g.<br> Exchange Server mailbox access error occurred <br> Exchange Server: ACMEEXCH1 <br> Exchange Privileged Mailbox: EnterpriseVault-ACMEEXCH1 <br> Mailbox DN: /o=ACME/ou=REO /cn=Recipients/cn=Dowdp <br> Reference: OMMS/GMSFP <br> An error occurred while moving items from the PST file to the designated Exchange Server mailbox folder PST file: %1 Exchange Server: %2 Mailbox DN: %3 Mailbox Folder: %4 Reference: %5 <br>e.g.<br> An error occurred while moving items from the PST file to the designated Exchange Server mailbox folder<br> PST file: E:\DOWDP_2002.PST <br> Exchange Server: ACMEEX1 <br> Mailbox DN: /O=ACME/OU=REO/CN=RECIPIENTS/CN=DOWDP<br> Mailbox Folder: Recruitment<br> Reference: MCM/GCT <br>

PST Migration Report Migration status: %1 PST file: %2 Archive Name: %3 Vault Id: %4 Exchange Server\Mailbox: %5 Number of folders processed: %6 Number of items archived: %7 Total size of items archived: %8 KB Number of items unable to be archived: %9 Number of items moved to mailbox: %10 Start Time: %11 End Time: %12

Starting Index Update with Storage transactions from 1 to 4810 <BR> Vault: Elwood Dowd<BR> Vault Id: 41HQEI812F653841B1401266A4093F861110000vault.acme.com <BR> Vault Store: Sales <BR> Vault Store Id: 125URQ123JB8AD4119CE200508B070AE51210000vault.acme.com <BR> Completed update of Vault Index with Storage transactions 1 to 4810 <BR> Vault: Elwood Dowd<BR> Vault Id: 1C61C1F20FF653841B1401266A4093F861110000vault.acme.com<br> Vault Store: Sales <br> Vault Store Id: 192696B383B8AD4119CE200508B070AE51210000vault.acme.com<br> Elapsed Time: 0:12:18 <br> Number of index additions replayed: 4810<br> Number of index deletions replayed: 0 Update of Vault Index with Storage transactions %5 to %6 suspended whilst processing transaction number %7 Vault: %2 Vault Id: %1 Vault Store: %3 Vault Store Id: %4 Elapsed Time: %8 (hours:minutes:seconds) Number of index additions replayed: %9 Number of index deletions replayed: %10 NOTE: The total number of index additions and deletions replayed may be less than the number of transactions processed. This is because the index update process is optimized so that index additions are not replayed for items that are known to have been fully deleted from the Vault. Number of archived items with an old version of the common index elements: %11 Number of archived items updated with the latest version of the common index elements: %12 NOTE: Index additions were performed using the latest version of the common index elements stored in the archived item. Where necessary the archived item was updated with the latest version of the common index elements. Update of Vault Index with Storage transactions from %5 to %6 suspended whilst processing transaction number %7 Vault: %2 Vault Id: %1 Vault Store: %3 Vault Store Id: %4 Elapsed Time: %8 (hours:minutes:seconds) Number of index additions replayed: %9 Number of index deletions replayed: %10 Unable to update the common index elements of the archived item. Reason: %1 Saveset Id: %2 Vault: %3 Vault Id: %4 Vault Store: %5 Vault Store Id: %6 NOTE: The archived item could not be updated with the latest version of the common index elements. The old version still exists in the item and will be used for the current index update process. <p>Abnormal error occurred Error: %1 Reference: %2 Info: %3 %4 %5 </p> <p>e.g.</p><font size="1"> <p><font size="3">Abnormal error occurred</font></p> <p><font size="3">Error: Cannot create a file when that file already exists. [0x800700b7]</font></p> <p><font size="3">Reference: CMC/ce</font></p> <p><font size="3">Info: CItemFetcher::FetchIndexMetadata</font></p> <p></p> <p></p></font>Cache Statistics Report Process Id: %1 Executable: %2 Cache Name: %3 Maximum Entries: %4 Entry Expiry Timeout: %5 (seconds) Number of Entries: %6 Elapsed: %7 (hours:minutes:seconds) Hits: %8 Misses: %9 Expiries: %10 Evictions: %11

Catalogue is not up to date and requires replay Vault: %1 Vault Id: %2 Vault Store: %3 Vault Store Id: %4 Last Transaction: %5 <br>e.g.<br> Catalogue is not up to date and requires replay <Br> Vault: Elwood Dowd <br> Vault Id: 41231EWQ18C42C046AE3A767A5700FC641110000acme.com<Br> Vault Store: Sales <br> Vault Store Id: 4123RQ7453B8AD4119CE200508B070AE51210000acme.com<br> Last Transaction: 0 <br>

Restarting Index Update with Storage transactions from 191673 to 241532 <br> Vault: Elwood Dowd<br> Vault Id: 41URGQ09FEBDAD3119CAB00508B070AE51110000vault.acme.com <br> Vault Store: Production <br> Vault Store Id: 210RE6Q3FEBDAD3119CAB00508B070AE51210000vault.acme.com PST Migration Report Migration status: %1 PST file: %2 Archive Name: %3 Vault Id: %4 RetentionCategory: %5 Number of folders processed: %6 Number of items archived: %7 Total size of items archived: %8 KB Number of items unable to be archived: %9 Elapsed Migration Time: %10 (hours:minutes:seconds) Example <p>PST Migration Report </p> <p>Migration status: Completed </p> <p>PST file: d:migrationsdowdp.pst <br />Archive Name: Elwood Dowd <br />Vault Id: 5F65JKE3T29DC114B96E02C9692488B0C1110000acme.com<br />RetentionCategory: Default <br />Exchange ServerMailbox: ACMEEXCH1Elwood Dowd </p> <p>Number of folders processed: 148 <br />Number of items archived: 11165 <br />Total size of items archived: 1372488 KB</p> <p>Number of items unable to be archived: 0 <br />Number of items moved to mailbox: 11428 </p> <p>Elapsed Migration Time: 2:27:20 (hours:minutes:seconds) </p>

Addition of item to catalogue abandoned <br> Catalogue: Journal 2004 <br> Catalogue Id: 643FB28D8F422214786182DA3AA60FF161110000vault.acme.com <br> Saveset Id: 123000000000000~200307543135410000~0~65F4F78AF7B043E0BF9DEC8BF46EE38 <br> Transaction: 10831 <br> All previous attempts to add the item to the catalogue have failed or been interrupted. To prevent further failures the item will not be indexed.Deletion of item from catalogue abandoned Catalogue: %1 Catalogue Id: %2 Saveset Id: %3 Transaction: %4 All previous attempts to remove the item from the catalogue have failed or been interrupted. To prevent further failures the item will be left in the catalogue. Could not determine the default system codepage. To migrate all messages, regardless of their native language, set the following DWORD registry key to the value "2" and retry the migration: HKLM\Software\KVS\Enterprise Vault\Agents\CodepageProcessing

Error from EMC Centera FPLibrary Function call: %1 Status: %2 (%3) Reason: %4 Pool Address: %5 <br>e.g.<br> Error from EMC Centera FPLibrary <br> Function call: HPPPacket.checkControlStatus: FP_SERVER_ERR (-10005) <br> Reason: The server reported an error from the operation (transid='bos-330-03/135/DELETE_CLIP') <br> Pool Address: 141.14.23.11,141.14.23.12 <br> Error opening EMC Centera C-Clip Function call: %1 Status: %2 (%3) Reason: %4 Pool Address: %5 <br>e.g.<br> Error opening EMC Centera C-Clip Function call: NetworkPacket.checkControl(2){HPPReadBlobTransaction.readBytes(HPPImportData&){HPPReadBlobTransaction.run(){ClusterCloud::readBlob(FPBasicGenericStream*,D4121FDA319ACe22ACME,,0,-1,-1,0){FPClip.Open(D4121FDA319ACe22ACME,1){FPClip_Open(-,FVF4VEEA319ACe22M8KSP0ACME,1) Status: FP_CLIP_NOT_FOUND_ERR (-10021) Reason: Clip CDF is not found in the pool (transid='ACMEVAULT01/931/READ_CLIP') Pool Address: 10.169.3.115,10.169.3.116,10.169.3.117,10.169.3.118

EMC Centera C-Clip contains incorrect Saveset Pool Address: %1 ClipId: %2 Expected: VaultStoreId: %3 VaultId: %4 SavesetId: %5 Received: VaultStoreId: %6 VaultId: %7 SavesetId: %8 <br>e.g.<br> EMC Centera C-Clip contains incorrect Saveset <br> Pool Address: 10.28.0.11,10.28.0.12,10.28.0.13,10.48.0.14 <br> ClipId: 543rt642IULOHeAFGKEQCSHP7OC <br> Expected: <br> VaultStoreId: 54RG67UIFF82E2F409375B900DEE0EB0A1210000ACMEVAULT <br> VaultId: 554FG6E37395ED94FAC9B99FDA89A0AB41110000ACMEVAULT<br> SavesetId: 219000000000000~200302040749290000~0~T5R43297FC0E4ACB961D6F17D06FB30 <br> Received: <br> VaultStoreId: 54RG67UIFF82E2F409375B900DEE0EB0A1210000ACMEVAULT <br> VaultId: &#53588;ñ&#7924;&#27075;&#53356;ñ&#27056;&#406; <br> SavesetId: 219000000000000~200302040749290000~0~T5R43297FC0E4ACB961D6F17D06FB30 <br> Could not execute Saveset database transaction Reason: %1 Saveset Id: %2 Transaction: %3 Reference: %4 <br />e.g.<br />Could not execute Saveset database transaction <br />Reason: The Vault is busy [0xc0041800] <br />Saveset Id: 432193400000000~200305232028550000~0~FF31EDE40FF44FBBBDEDA6467BC19E5 <br />Transaction: FF31EDE40FF44FBBBDEDA6467BC19E5 <br />Reference:

Export Archive Report Export status: %1 Job Id: %2 Vault Name: %3 Vault Id: %4 Target Exchange Server\Mailbox: %5 Number of items restored: %6 Number of items unable to be restored: %7 Age range filter: %8 Retention category filter: %9 Elapsed Export Time: %10 (hours:minutes:seconds) <br>e.g.<br> Export Archive Report <BR> Export status: Completed <BR> Job Id: Exp1_20040621132529 <BR> Vault Name: Dowd, Elwood <BR> Vault Id: 14RT65322AD4FB4EA842C4106A2DA8401110000vault.acme.com<br> Target Exchange Server\Mailbox: ACMEEXCH1\Dowd, Elwood <br> Number of items restored: 321<br> Number of items unable to be restored: 2<br> Age range filter: (None) Retention category filter: (None) Elapsed Export Time: 00:04:18 (hours:minutes:seconds) <br>e.g.<br> Export Archive Report <br> Export status: Incomplete <br> Processing aborted due to an unrecoverable error. <br> Job Id: Exp3_20041414431943 <br> Archive Name: Dowd, Elwood<br> Vault Id: 5UTRLEW061FE5424A863424CFE79589991110000acme.com <br> Target PST file location: D:\PST Export\Dowd,Elwood_Export_0001.pst <br> Number of PST files: 1 <br> Number of items restored: 0 <br> Number of items unable to be restored: 1<br> Age range filter: <None> <br> Retention category filter: <None> <br> Elapsed Export Time: 00:00:05 (hours:minutes:seconds)

The Clip cannot be deleted from the EMC Centera Server. Pool Address: %1 Clip-Id: %2 VaultStoreId: %3 VaultId: %4 SavesetId: %5 This can be caused by the Clip Retention period or because the Centera does not allow deletes to be performed. <br />e.g.<br />The Clip cannot be deleted from the EMC Centera Server. <br />Pool Address: 127.13.17.13<br />Clip-Id: 3NMK8VSBGFOERe4LGVFV8V6BA5MG60VRFCN700000000000000000<br />VaultStoreId: 12FTR563123D88748849605BB6359FBB41210000vault.acme.com <br />VaultId: 414123120C102F041A2AA756D994B8D4E1110000vault.acme.com <br />SavesetId: 152000000000000~200401071644180000~0~BBB164935DB140AFBC5244C49865726 <br />This can be caused by the Clip Retention period or because the Centera does not allow deletes to be performed.

The Archive is currently unavailable for exporting. Archive Name: %1 Vault Id: %2 Possible reasons include the Archive's index is being updated, the Archive is reserved exclusively for bulk archiving (such as PST migration) or the Archive is being deleted

Error restoring Saveset during export operation. Job Id: %1 Vault Name: %2 Vault Id: %3 Saveset Id: %4 Reference: %5 <br>e.g.<br> Error restoring Saveset during export operation. Job Id: Exp3_20042227161943 <br> Vault Name: Dowd, Elwood<br> Vault Id: 59RG8R4L61FE5424A863424CFE79589991110000acme.com <br> Saveset Id: 54F040000000000~200203101505520000~0~RE43E359B16F4A71A68289D6D6F4501 <br> Reference: FMP/MAPI/SC <br>

A COM exception has been raised. %1 Internal reference %2 An exception is raised when a process encounters an unexpected fault. Contact your support representative with details of this and any preceding errors. <br>e.g.<br> A COM exception has been raised. <br> The SQL database server detected a deadlock while accessing the Vault Database '' <br>Description: Additional Microsoft supplied information: Source: Number: SQL State: Native Error: HRESULT SQL Command: [0xc0043433] Internal reference VaultStoreDB.cpp (CVaultStoreDB::GetNextSafeUniqueNumber) [lines {1994,2016,2019,2020,2021,2024}] built May 20 16:28:38 2004 <br> An exception is raised when a process encounters an unexpected fault. Contact your support representative with details of this and any preceding errors.

Failed to read the ProgID of the HSM Software Component from the Directory. HSMType : %1 Method : %2 <br>e.g.<br> Failed to read the ProgID of the HSM Software Component from the Directory. <br> HSMType : 0 <br> Method : CVaultStoreDB::GetSavesetFilePath <br>

An attempt was made to rebuild the shared indexable item for one or more Savesets that have been Migrated. The Savesets in question will have their shared indexable items replayed as it is not possible to rebuild them. If a rebuild really is required then the Savesets will need to be Unmigrated. Vault: %1 Vault Id: %2 Vault Store: %3 Vault Store Id: %4 Method : %5

Could not store an item in the saveset file. Reason: %1 Saveset File: %2 This archive attempt has been canceled. <p>e.g.<br> Could not store an item in the saveset file. Reason: Saveset compression failed. Error: Context: [0xc0041aa6] Saveset File: E:\Enterprise Vault Stores\Journal\2003\06\21\08\941300000000000~200304212211490000~0.DVS This archive attempt has been canceled.

Failed to recall a Saveset from its Collection. Reason: %1 Saveset: %2 Collection: %3 <p>e.g.<br> Failed to recall a Saveset from its Collection. Reason: Failed to extract CAB file. [0xc0041b0f] Saveset: E:\Enterprise Vault Stores\Eng\2003\03\10\14\122500000000000~200303104400350000~0.ARCHDVS <Br> Collection: E:\Enterprise Vault Stores\Eng\2003\03\10\Collection5116.CAB

e.g. A Collector encountered an error.<Br> Reason: Error from EMC Centera FPLibrary Function call: Status: () Reason: Pool Address: [0xc0041a68] <br> PartitionEntryID: 4F4213B19A778EF4DBF93BD440FCD79E81q10000ACME.COM <br> Method: CCollectorEMCCentera::HouseKeep

The Collector Manager encountered an error. Reason: %1 Method: %2 <br>e.g.<br> The Collector Manager encountered an error. Reason: The Partition Cache is empty. The EnumPartitionsByMigrator method must be successfully called before any other methods of the IMigratorAssister interface. [0xc0041a92] Method: CCollectorManager::CollectorManager

The Collector Manager failed to create/start a Partitions Collector. Collection will not take place for this Partition. The Storage Service needs to be restarted in order for Collection to occur in this Partition. Reason: %1 PartitionEntryID: %2 Method: %3

A Partition's Collector run has finished. Partition Root Path: %1 %2 Saveset(s) were Collected into %3 Collection(s). The run completed in %4. <br>e.g.<br> A Partition's Collector run has finished. <br> Partition Root Path: E:\Enterprise Vault Stores\Eng <br> 193 Saveset(s) were Collected into 6 Collection(s). <br> The run completed in 0 hour(s), 4 minute(s), 25 second(s). A Partition's Collector will not compact a Collection that contains no more files before expiry/deletion than the number of files defining a Sparse Collection. Partition Root Path: %1 Collection File: %2 Number of files in Collection: %3 Number of files defining a Sparse Collection to be compacted: %4

Starting population of Retention Category information in Vault Store '%1'. Saveset records to be updated: %2 <br>e.g.<br> Starting population of Retention Category information in Vault Store 'ACME STORE1'. <br> Saveset records to be updated: 313541 <br>

Population of Retention Category information in Vault Store '%1' stopped. Saveset records updated: %2 Saveset records remaining to be updated: %3 The population of Retention Category information will be resumed the next time the Storage Service is started. Completed population of Retention Category information in Vault Store '%1'. Saveset records updated: %2 The Vault Store schema version is '%3', which is not the latest version. The Vault Store should be updated using the Vault Administration Console. Error during population of Retention Category information in Vault Store '%2'. Reason: %1 <br>e.g.<br> Error during population of Retention Category information in Vault Store 'ACME STORE1'. Reason: The remote procedure call failed. [0x800706be] The population of Retention Category information for the Vault Store '%1' could not be completed because information is missing from an Index. Saveset records updated: %2 Saveset records remaining to be updated: %3 Index Replay operations have been requested to recover this information. The population of Retention Category information will be resumed the next time the Storage Service is started.

A Collector encountered a recoverable fault while processing a file. This can occasionally occur, but should this warning continue to be logged for the SAME FILE then contact your support representative. Reason: %1 PartitionEntryID: %2 File: %3 Method: %4

<p>Unable to complete archive request Reason: %1 Vault: %2 Vault Id: %3 Item: %4 Item Id: %5 Reference: %6 Supplementary Info: %7 </p> <p>e.g.</p> <p>Unable to complete archive request<br /><br />Reason: Item cannot be archived. Several attempts to archive the item have failed or been interrupted. To prevent further failures the item should not be presented for archival again. [0xc00419bb]<br />Vault: Misc<br />Vault Id: 1S4A45111C30D4944B86F75044F1999291110000ACME<br />Item: Saveset Message for Mailbox /o=ACME /ou=zko/cn=Recipients/cn=DowdP, Message titled: Six foot white rabbits<br /></p>Unable to complete retrieval request Reason: %1 Vault: %2 Vault Id: %3 Item Id: %4 Reference: %5 Suplementary Info: %6 %7 <br>e.g.<br> Unable to complete retrieval request <br> Reason: The parameter is incorrect. [0x80070057] <br> Vault: Elwood P Dowd Vault Id: 14123R5C6A87D544CB21A585D9047C2F71110000acme Item Id: 14123R5C6A87D544CB21A585D9047C2F71110000acme+300120000000000~200204110843120000~0~CEB18767AC5242B7A0D1D9DA18D5695+0++1321+2+38229.601894444444+86+702 Reference: LMI/rs Suplementary Info: EnterpriseVault.Collector Id: 1321

Cannot find the Enterprise Vault document conversion template file. Reason: %1 Template File: %2 Reverting to the standard template to generate HTML output. <br>e.g.<br> Cannot find the Enterprise Vault document conversion template file. <br> Reason: The system cannot find the file specified. [0x80070002] <br> Template File: C:\Program Files\Enterprise Vault\Converters\EVTemplateMain.htm <br> Reverting to the standard template to generate HTML output. <br>

Unable to update Vault Store Partition record. Partition : %2 Destination : %3 Internal references: Flags : %4 Error : %1 Reference : %5 <br>e.g.<br> Unable to update Vault Store Partition record.<br> Partition : 4JF8RKDSU7453LDPQ348A590E78088278071q10000kvault.acme.com<br> Destination : Internal references:<br> Flags : <br> Error : EMC Centera Collection cannot be disabled until all uncollected Savesets have been collected. If the Storage Service is not running start it and try again later. If the Storage Service is running try again later. [0xc0041af9]<br> Reference : StorageManage.cpp (CStorageManage::EMCCenteraDisableCollection) [lines {...,2967,2968,2977,2978,2982,2986,2987,2988,2998,3013,3017,3019}] built Feb 13 18:34:42 2004

Some items could not be converted to shortcuts. Number of items not converted: 1 <P></P> PST file: D:\PSTpilot\ARCHIVE.PST<P></P> Archive Name: Test User<P></P> Vault Id: 181D3E8273ED1E441A1449EE6594311281110000KVAULT.local

A Partition's Collector run has finished. Partition Root Path: %1 %2 Saveset(s) were Collected into %3 Collection(s). %4 Collection(s) were Migrated to secondary storage. The run completed in %5. <br>e.g.<br> A Partition's Collector run has finished. <br> Partition Root Path: G:\Enterprise Vault Stores\ACME <br> 0 Saveset(s) were Collected into 0 Collection(s). <br> 0 Collection(s) were Migrated to secondary storage. <br> The run completed in 0 hour(s), 6 minute(s), 23 second(s). A Collector encountered an error during migration. The Collector will abandon migration for the current run. Migration attempts will continue during future runs. Reason: %1 PartitionEntryID: %2 Secondary Storage Location: %3 Method: %4 (%5) e.g.<br> Completed archive conversion and update of Archive Index with Storage transactions 1 to 86830 <br> Archive: Elwood Dowd <br> Archive Id: 412RET5QD13DBD3119CAC00508B070AE51110000vault.acme.com <br> Vault Store: UK <br> Vault Store Id: 48FHE21DSEBDAD3119CAB00508B070AE51210000vault.acme.com<br> Elapsed Time: 1:10:34 (hours:minutes:seconds) <br> Number of index additions replayed: 1 <br> Number of index deletions replayed: 0 <br> Restarting archive conversion and update of Archive Index with Storage transactions from %1 to %2 Archive: %4 Archive Id: %3 Vault Store: %5 Vault Store Id: %6 NOTE: Index additions will use the common index elements currently stored in the archived item. e.g.<br> Starting archive conversions and update of Archive Index with Storage transactions from 1 to 86830 <br> Archive: Elwood Dowd<br> Archive Id: 412RET5QD13DBD3119CAC00508B070AE51110000vault.acme.com <br> Vault Store: UK <br> Vault Store Id: 48FHE21DSEBDAD3119CAB00508B070AE51210000vault.acme.com

Update of Archive Index with Storage transactions from %5 to %6 suspended whilst processing transaction number %7 during archive conversion Archive: %2 Archive Id: %1 Vault Store: %3 Vault Store Id: %4 Elapsed Time: %8 (hours:minutes:seconds) Number of index additions replayed: %9 Number of index deletions replayed: %10 NOTE: The total number of index additions and deletions replayed may be less than the number of transactions processed. This is because the index update process is optimized so that index additions are not replayed for items that are known to have been fully deleted from the Vault. Number of archived items with an old version of the common index elements: %11 NOTE: Index additions used the common index elements stored in the archived item. Items with old versions of the common index elements may not be indexed with the same level of functionality as items archived using the latest version of the common index elements. e.g.<br> Archive Conversion Report<BR> Archive: Elwood Dowd <BR> Archive Id: 14RE5QWD13DBD3119CAC00508B070AE51110000vault.acme.com<br> Number of items processed: 0 <br> Number of items remaining in original default Archive: 0<BR>Update of Vault Index completed processing Storage transactions from %1 to %2. Continuing... Vault: %4 Vault Id: %3 Vault Store: %5 Vault Store Id: %6 Number of items moved to Archive Folders: %7 Number of new Archive folders created: %8

<p>A Collector encountered an error attempting to migrate Collection file %2 to %3. The Collector will abandon migration for the current run. Migration attempts will continue during future runs. Reason: %1 PartitionEntryID: %4 Secondary Storage Location: %5 Method: %6 (%7) </p> <p>e.g.</p> <p>A Collector encountered an error attempting to migrate Collection file E:\Enterprise Vault Stores\EXUSNY1 Ptn11\1999\01\02\Collection59766.CAB to F:\US\VAULT_STORES\EXUSNY1\Partition 11 migration\FB933F8AE14B4C4E9593C9212886AB36\1999\01\02\Collection59766.CAB. The Collector will abandon migration for the current run. Migration attempts will continue during future runs. </p> <p>Reason: The system cannot find the path specified. [0x80070003] </p> <p>PartitionEntryID: 1FB933F8AE14B4C4E9593C9212886AB361q10000ACME-NY </p> <p>Secondary Storage Location: F:\US\VAULT_STORES\EXUSNY1\Partition 11 migration </p> <p><font size="1"><font size="3">Method: CMigrator::SendFile (SF/CD/F:\US\VAULT_STORES\EXUSNY1\Partition 11 migration\FB933F8AE14B4C4E9593C9212886AB36)</font> </font></p>A Collector encountered an error attempting to verify the successful migration of Collection file %2. This unverified Collection file has been deleted from the secondary storage location. The Collector will abandon migration for the current run. Migration attempts will continue during future runs. Reason: %1 PartitionEntryID: %3 Secondary Storage Location: %4 Method: %5 (%6) A Collector encountered an error attempting to verify the successful migration of Collection file %2. This unverified Collection file could not be deleted, and should be removed manually from the secondary storage location. The Collector will abandon migration for the current run. Migration attempts will continue during future runs. Reason: %1 PartitionEntryID: %3 Secondary Storage Location: %4 Method: %5 (%6)

Client request refused due to insufficient privileges user %1 attempted to access the Archive: Archive name: %2 Vault Id: %3 but does not have permission(s) (%4). A frequent cause of this Warning is a user attempting an operation on a forwarded moved or copied shortcut to a Vault for which they do not have the required permission(s). Client request refused due to insufficient privileges user %1 attempted to access the Archive Folder: Archive name: %2 Archive folder path: %3 Vault Id: %4 but does not have permission(s) (%5). A frequent cause of this Warning is a user attempting an operation on a forwarded moved or copied shortcut to a Vault for which they do not have the required permission(s). The Access Control List of the archive/folder identified by %1 has been truncated because its length exceeded the maximum. Number of present Access Control Entries: %2 Number of truncated Access Control Entries: %3<br />e.g.<br />The Access Control List of the archive/folder identified by '140E5472153C07F4E9B91B53658461E1B1110000EV1.acme.com' has been truncated because its length exceeded the maximum.<br /><br />Number of present Access Control Entries: 1820<br />Number of truncated Access Control Entries: 34707<br /><br />For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp<br /><br /><br />

<p>A EMC Centera Collector thread encountered an error and has stopped. Reason: %1 PartitionEntryID: %2 Method: %3 </p> <p>e.g.</p> <p><font face="Courier New"><font size="4"><font face="Times New Roman, Times, serif"><span class="FIXEDFONT">A EMC Centera Collector thread encountered an error and has stopped.</span><br /></font><tt><span class="FIXEDFONT"><font face="Times New Roman, Times, serif">Reason: Not enough storage is available to complete this operation. &nbsp;[0x8007000e]</font>&nbsp;&nbsp;</span></tt></font></font></p>

The Storage Service has started the automatic upgrade of the %1 Database. The Storage Service will become fully operational when the upgrade is complete. For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp

Failed to read Collection file. Check the Storage Service is running. Reason: %1 Relative Collection Filename: %2 Extract Operation: %3 Reference: %4 For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp

Could not restore temporarily unavailable Saveset during export operation. %1 Job Id: %2 Vault Name: %3 Vault Id: %4 Saveset Id: %5 Reference: %6 For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp Addition of item to catalogue abandoned. %1 Catalogue: %2 Catalogue Id: %3 Vault Store: %4 Vault Store Id: %5 Saveset Id: %6 Relative Collection Filename: %7 Reference: %8 For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp

The MigratorServer cannot start because the required version of MAPI is missing or incorrectly configured on the Enterprise Vault server: To resolve the problem: 1. Stop all Enterprise Vault services and processes that are using MAPI. 2. Ensure that a version of MAPI supplied with Microsoft Outlook 2003 or later is installed and correctly configured on the Enterprise Vault server. 3. Restart the Enterprise Vault services. If the problem persists, see the "Troubleshooting" section of the Enterprise Vault Administration help file for guidelines on how to proceed. For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp

Unable to complete update request Reason: %1 Vault: %2 Vault Id: %3 Item Id: %4 Reference: %5 Supplementary Info: %6 %7 For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp

Verification of a Saveset file contained within a Collection file failed. Reason: %1 PartitionEntryID: %2 Saveset: %3 Collection: %4 Message: %5 Method: %6 For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp Verification of a Saveset file prior to being added to a Collection file failed. Reason: %1 PartitionEntryID: %2 Saveset: %3 Message: %4 Method: %5 For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp A Collector has determined that the VerifyCollectedFiles registry key is disabled while the VerifyFilesInNewCollection registry key is enabled. VerifyFilesInNewCollection is therefore ignored. For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp

The migration request was refused because the file is too large for the secondary storage device. PartitionEntryID: %1 File: %2 Method: %3 (%4) For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp The Vault Store could not be completely deleted because the Partition with EntryId '%1' contains one or more files with a retention period (on the secondary storage device) that has not yet expired. Vault Store Name: %1 Vault Store Id: %2 The operation can be retried at any time. For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp

Archive operation cancelled because the archived file '%3' was of size 0 bytes. The item has not been archived. [Vault Store: %1] [Vault ID: %2] [Transaction ID: %4] For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp The PST migration failed because mailbox '%1' has not been provisioned. Check that the mailbox is in a provisioning group, run the provisioning task, and then try the migration again. For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp Unable to create archive because no Indexing Service is defined for computer '%1'. Use the Administration Console to do one of the following: -- Add an Indexing Service to computer '%1' -- Edit the properties of computer '%1' to specify a Default Indexing Service [Archive Name: %2] [Archive Type: %3] [Vault Store: %4] For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp An error occurred while converting the saveset into legacy saveset format. [Saveset ID: %1] [Format: %2] [ClientVersion: %3] MAPI is required to download savesets to legacy Enterprise Vault clients. Check that MAPI is installed on this server. For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp

Some items could not be deleted from the NSF file. Number of items not deleted: %1 NSF file: %2 Archive Name: %3 Vault Id: %4 For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp Some items could not be moved to the target mailbox. Number of items not moved: %1 NSF file: %2 Archive Name: %3 Vault Id: %4 Domino Mailbox: %5 For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp Some items could not be converted to shortcuts. Number of items not converted: %1 NSF file: %2 Archive Name: %3 Vault Id: %4 For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp NSF Migration Report Migration status: %1 NSF file: %2 Archive Name: %3 Vault Id: %4 Retention Category: %5 Domino Mailbox: %6 More information: %7 Elapsed Migration Time: %8 (hours:minutes:seconds) For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp

An error occurred while creating new entries in directory database for fingerprint catalogue instance. Following further details are available. Vault Store Group Entry Id: %1 Target SQL Server name: %2 For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp

Partition rollover could not find any ready partitions for VaultStore %2 of Storage service %1. Note All Partitions in of vaultStore %2 will be closed. Use VAC to create a new open partition or open an existing partition. For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp Partition rollover has occurred. Details: Storage Service ID:%1 Vault Store: %2 Closed Partition: %3 Opened Partition: %4 Triggering Mechanism: %5 For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp

The item's Retention Category cannot be updated. The original Retention Category prevents deletion of archived items but the new one does not. For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp Could not get the exclusive lock for fingerprint database '%1' on SQL Server '%2'. Please ensure that no other application is accessing this database. For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp Could not get the exclusive lock for fingerprint database '%1' on SQL Server '%2' even after %3 attempts. Please ensure that no other application is accessing this database. For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp

Database update completed for fingerprint database. Following details are available. Fingerprint Database name:%1 SQL Server name:%2 Old Schema Version:%3 New Schema Version: %4 For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp

The Storage Service was stopped while waiting for an update of the fingerprint database(s) to be performed for vault store group identity '%1'. For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp The Storage Service is waiting for another Storage Service to complete an update of the Fingerprint database '%1', or waiting to get exclusive access to this database. Please ensure no applications, for example SQL Enterprise Manager or SQL Query Analyzer, are accessing this database. %2 For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp

An error occurred whilst inserting into the Vault Store Database PartitionCache table. VaultStoreEntry: %1 PartitionEntry: %2 IdPartition: %3 Error: %4 For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp An error occurred whilst updating the Vault Store Database PartitionCache table. VaultStoreEntry: %1 PartitionEntry: %2 IdPartition: %3 Error: %4 For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp An error occurred whilst deleting from the Vault Store Database PartitionCache table. VaultStoreEntry: %1 PartitionEntry: %2 IdPartition: %3 Error: %4 For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp

Successfully set Backup Mode on all the Vault Stores in the Vault Store Group that are managed by the Storage Service on this computer. Vault Store Group Name: %2 Vault Store Group EntryID: %1 Storage Service EntryID: %3 For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp Successfully set Backup Mode on all the Vault Stores that are managed by the Storage Service on this computer. Computer Name: %2 Storage Service EntryID: %1 For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp

A new Partition Network Share was created after verification of the previous one failed. PartitionEntry: %1 DirectoryPath: %2 NewShareName: %3 OldShareName: %4 For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp The Storage Service was stopped while waiting for verification of Partition Network Shares to happen for Storage Service EntryId '%1'. For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp Due to an inconsistency the Remote Partition Root Path for this Partition was updated to the correct value. PartitionEntry: %1 DirectoryPath: %2 NewValue: %3 OldValue: %4 For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp

SIS part validation failed. The fingerprint for the SIS part generated during validation does not match the fingerprint created when it was archived. For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp Fingerprint validation failed. The fingerprint set for the saveset generated during validation does not match the fingerprint set created when it was archived. For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp SIS part validation failed. The fingerprint for SIS Part 0 generated during validation does not match the fingerprint created when it was archived. For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp

Legacy registry values are in use. Enterprise Vault has a new method of backing up Vault Stores that cannot be used until you remove this registry value. See the Administrator's Guide for information about backing up Vault Stores. The following legacy registry values were found: %1 For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp

Successfully cleared Backup Mode from all the Vault Stores in the Vault Store Group that are managed by the Storage Service on this computer. Vault Store Group Name: %2 Vault Store Group EntryID: %1 Storage Service EntryID: %3 For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp Successfully cleared Backup Mode from all the Vault Stores that are managed by the Storage Service on this computer. Computer Name: %2 Storage Service EntryID: %1 For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp

Storage Expiry Report Vault Store Name: %1 Vault Store Id: %2 Number of vaults processed: %3 Number of vaults enabled for expiry: %4 Total number of expired items deleted: %5 Total number of items that could not be deleted: %6 Items marked with sent\received date based retention categories have been deleted: %9 Items marked with archived date based retention categories have been deleted: %10 Start Time: %7 End Time: %8 For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp Storage Expiry Report (Report Mode) Vault Store Name: %1 Vault Store Id: %2 Number of vaults processed: %3 Number of vaults enabled for expiry: %4 Total number of expired items: %5 Items marked with sent\received date based retention categories have been deleted: %8 Items marked with archived date based retention categories have been deleted: %9 Start Time: %6 End Time: %7 For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp

Watch file partition scan will be stopped for following EMC centera partition as [%1] consecutive unreplicated clips were found. Partition Name = %2 VaultStoreEntryId = %3 For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp Watch file partition scan stopped for all the partitions on a VaultStore as it is entering the backup mode. Vault Store Name: %1 Vault Store EntryID: %2 For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp Watch file partition scan restarted for all the partitions on a VaultStore as it is exiting the backup mode. Vault Store Name: %1 Vault Store EntryID: %2 For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp An error occurred while trying to raise SIS parts secured notification. Following information is available. Error: %1 Partition Name = %2 VaultStoreEntryId = %3 For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp

An error occurred while trying to submit a partition scan request. Following information is available. Error: %1 VaultStoreEntryId = %2 For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp An invalid saveset was encountered while doing watch file scan. This archive operation will be attempted to be cancelled. Following further information is available. Partition Name = %1 VaultStoreEntryId = %2 TransactionID = %3 Invalid Reason = %4 For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp An invalid SIS part was encountered while doing watch file scan. Following further information is available. Partition Name = %1 VaultStoreEntryId = %2 ParentTransactionID = %3 Invalid Reason = %4 For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp

A problem was encountered while part of an item was being archived. A new copy of the part in question will be made in the vault, and the old copy will be 'blacklisted' to prevent further problems occurring. Reason = %1 ParentTransactionId = %2 Attachment Id =%3 Old SIS part Id = %4 New SIS part Id = %5 For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp Following archive could not be deleted as it contains items that are on hold, or their retention category does not allow deletions, or a compliance device retention period prevents them from being deleted. Archive Name = %1 Archive Entry Id = %2 Total items on hold = %3 For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp

Failed to delete a Partition. Partition Entry Id : %2 Vault Store Entry Id: %3 Internal references: Error : %1 Reference : %4 For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp

Failed to access file '%2'. Check the '%5' is running and that there are no errors with Source PDVFS in the Application event log. Reason: %1 Operation: %3 Reference: %4 For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp An error occurred while trying to recover from an error during archiving. The database and partition may be in an inconsistent state. For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp Secured item verification failed for one or more SIS parts of a saveset. Following further information is available. Partition Name = %2 VaultStoreEntryId = %3 Saveset TID = %4 Reason = %1 For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp

An error occurred while attempting to delete a SIS part from a partition. A reference to a SIS Part that has been marked as unreferenced in the Fingerprint Catalogue has been found in one of the vault stores in the vault store group. Please contact your support representative. The following information is available: %1 For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp Verification of a Sis Part file being collected failed. Reason: %1 PartitionEntryID: %2 Saveset: %3 Collection: %4 Message: %5 Method: %6 For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp Verification of a Saveset file being collected failed. Reason: %1 PartitionEntryID: %2 Saveset: %3 Collection: %4 Message: %5 Method: %6 For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp

Validated the XML trigger file for notifying that the partition is secure.The details are as follows: Partition Name:%1 PartitionEntryID: %2 FilePath: %3 Vendor Name: %4 Vendor AppType: %5 Partition Secured DateTime = %6 Vendor TransactionId = %7 For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp Two or more partitions are configured to use the same location. The Storage service will not start until all partition locations are unique. Affected partitions:%1 Please contact your support representative. For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp The Enterprise Vault server is using legacy registry values that place Enterprise Vault into read-only mode. Backup mode cannot be used until you remove these registry values. Check the event log on the Enterprise Vault server. For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp A Partition's Collector run has finished. Some files were not collected because they have not been backed up. Partition Root Path: %1 Archived items: %2 Files added to collections: %3 Collections: %4 Time taken for the run [H:M:S]: %5:%6:%7 For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp A Partition's Collector/Migrator run has finished. Some files were not collected because they have not been backed up. Partition Root Path: %1 Archived items: %2 Files added to collections: %3 Collections: %4 Files migrated to secondary storage: %5 Time taken for the run [H:M:S]: %6:%7:%8 For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp

The database for Vault Store '%1' has a schema version of '%2', which is not the latest version. Start the Storage service that hosts the Vault Store in order to upgrade the schema version. Start the Storage service on: %3 For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp

An attempt was made to delete an ArchiveFolder record that still exists in an exchange mailbox. (This may be due to an erroneous call from a 3rd party application using the CM API) For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp

A new SQL index has been created to improve the performance of processing items in the Centera collection area. Index Name: %1 Table Name: %2 Database: %3 SQLServer: %4 VaultStoreEntryId:%5 For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp

You are recommended to create a new SQL index for this vault store database to improve the performance of processing items in the Centera collection area. Table Name:%1 Database: %2 SQLServer: %3 VaultStoreEntryId:%4 See %5 for further information. For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp

Could not contact the Indexing Service Please check the Indexing Service has been started on %2 VaultID: %4 Internal reference: %3 : %1 <br>e.g.<br> Could not contact the Indexing Service <br> Please check the Indexing Service has been started on ACMEVAULT1 <br> VaultID: 1D1D02C3867530NINE54C75F76DE8AAF51110000vault.acme.com <br> Internal reference: SGETACCP CoCreate : Access is denied. [0x80070005]<br>

Could not add Indexable Item and Per-user data to Index: %1 Internal reference: %2 Additional Info: %3 <br>e.g.<br> Could not add Indexable Item and Per-user data to Index:<BR> The parameter is incorrect. [0x80070057] <BR> Internal reference: 2E413ACE1FDC9C4D883B46D36ED8397F1110000vault.acme.com<br> Additional Info: load <br>

Could not open indexing parameters Reason: %1 Index: %2 <br>e.g.<br> Could not open indexing parameters <br> Reason: Could not open indexing parameters <br> Index: 44REQ24Y6505DEF449DD1216C1CFE33141110000vault.acme.com

A COM error occurred. %1 Internal reference: %2 <BR>e.g.<br> A COM error occurred. <br> A low level indexing operation has failed Error: Index Id: [0x80041c43] <br> Internal reference: CDELW 1RFT5427UAQ2DEF449DD1216C1CFE33141110000vault.acme.com

A low level indexing operation has failed Error: %1 Index Id: %2<br />e.g.<br />A low level indexing operation has failed <br />Error: Filter error [AV:24] <br />Index Id: 134A9F3133F55514792A0700563B161601110000acme.com/Volume:1 (Journal Archive) <br /><br />

The index data could not be committed to disk. Possible reasons are: a) Disk space or quota has been exhausted on the index device b) Permissions do not allow the service access to the index c) The index device is not available There are %1 kilobytes available to the account %2 in index location %3 Low level indexing error: %4

An IndexServer could not login user: %1\%2 in the Windows NT domain Make sure that the 'Act as part of the operating system' user right has been granted to the Enterprise Vault site service account on the machine where the Indexing Service is located

e.g.<br> Vault 'NY 10/04/2004_0010' has rolled-over to Vault 'NY 10/04/2004_0011' <p> Internal References: <br> Original VaultID: 110B72360A4D5DA4592CB47BD28ED23C81110000vault.acme.com <br> New VaultID : 1434D84D7102F034BA303613861677AC51110000vault.acme.com <br> ROV [490000000]

Failed to update the Vault Directory with Vault date-ranges. The Index will not be flushed to disk until this problem is resolved. <br>e.g.<br> Failed to update the Vault Directory with Vault date-ranges. The Index will not be flushed to disk until this problem is resolved. <p> Error code: Access is denied. [0x80070005] Error code: %1

Client request refused due to insufficient privileges. User %1 does not have permission(s) (%2) to any folder in the Vault with VaultID %3. <p>e.g.<br> Search request refused because the user does not have sufficient permissions to search any folder in the archive. User: ACMECORP\DOWDP <br> Required Permissions: Read<br> Archive: ACME Info <br> Archive Id: 129761B8KIER1BC4A920D385B67BE41C11110000acme.com Abnormal error occurred Error: %1 Reference: %2 Index: %3 Info: %4 %5 %6 <br>e.g.<br> Abnormal error occurred <br> Error: A low level indexing operation has failed<br> Reference: CAVUpdator/OAVI/o(h) <br> Index: 15EY789B40BD32C47921B837977DBB2581110000vault.acme.com <br> Info:

e.g.<br> Failed to commit Index updates to disk. <br> Reason: A low level indexing operation has failed<br> Error: Index Id: [0xc0041c43] <br> Index Id: 43TY212E2BA61EE40A0A1841221C018681110000acme.com<br> Index Path: F:\Indexes\43TY212E2BA61EE40A0A1841221C018681110000acme.com <br> Available Disk Space: 0 KB(0 KB) <br> Number of Items added: 46 <br> Number of Items deleted: 0 <br> Number of new words: 35283 <br> Additional Info: Makestable <br> Vers:1401 Mem Load:9771 (Max:1310720) KB<p>Index Server process failed Index: %1 PID: %2 Exit Code: %3 </p> <p>e.g.</p> <p>ndex Server process failed <br />Index: 1111B301E5F86D54CB5E786646BB175E91110000kvsprod/VolumeSet:512<br />PID: 7936 <br />Exit Code: 3 <br /></p>Search request failed. Reason: %1 Index Id: %2 Requestor: %3 Search Query: %4 Search Arguments: %5 <br>e.g.<br> search request failed. <br> Reason: Operation aborted [0x80004004] <br> Index Id: 1412G54341FDC9C4D883B46D36ED8397F1110000vault.acme.com (share) <br> Requestor: ACME\Dowd<br> Search Query: "subj" 40 "file extensions"<br> Search Arguments: Start: 1 Number: 10, Options:0x10000<br> Schema:0x1fdbfa Format:0 PI: CP: <br>

The request was refused due to insufficient privileges. User: %1 Request: %2 Supplementary Info: %3 The caller must be an administrator to perform this operation. For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp

<p>Failed to add item to the index due to failure loading the item's index metadata. Reason: %1 Index Id: %2 Saveset Id: %3 Internal reference: %4 For more information, see Help and Support Center at <a href="http://evevent.veritas.com/rosetta/showevent.asp">http://evevent.veritas.com/rosetta/showevent.asp</a> </p> <p>e.g.&nbsp; Failed to add item to the index due to failure loading the item's index metadata. |Reason: No such interface supported [0x80004002] |Index Id: 213D931093CC94A429D26CADD47E332CA1110000ACME/Volume:7 (MailboxAliasName) |Saveset Id: 128412000000000~200401071308210000~0~138DA8FD60624EB693BA9F1FCC9A22C |Internal reference: XML II load |<br /></p>The index volume is full. Index Volume: %1 Sequence Number: %2 Maximum Location: %3 Number of documents: %4 File size: %5% of maximum size A new index volume has been created. For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp Request to update the index refused. The Index Sequence Number assigned to the request indicates that the request has already been actioned. Index Id: %1 Request: %2 Additional Info: %3 For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp <p>Unable to add the item to the index since it is not currently available from the Storage Service. Reason: %1 Attempt: %2 Index: %3 Saveset Id: %4 Sequence Number: %5 For more information, see Help and Support Center at <a href="http://evevent.veritas.com/rosetta/showevent.asp">http://evevent.veritas.com/rosetta/showevent.asp</a> </p><font size="1"> <p><font size="2">Unable to add the item to the index since it is not currently available from the Storage Service.</font></p> <p><font size="2">Reason: Saveset is temporarily unavailable. Try operation again later. [0x80041b03]</font></p> <p><font size="2">Attempt: 7</font></p> <p><font size="2">Index: 1R4WKFIR5S9A7D74E9344C1942C220A2B111000ACME/Volume:1 (JOURNALVAULT)</font></p> <p><font size="2">Saveset Id: 41D5A0000000000~200305102205190000~0~42025941687F4C16A058C95C64CB495</font></p> <p><font size="2">Sequence Number: 607122</font></p></font>Addition of item to index abandoned. Index: %1 Saveset Id: %2 Sequence Number: %3 All previous attempts to add the item to the index have failed. To prevent further failures the item will not be indexed. For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp Addition of offline item to index abandoned. Index: %1 Saveset Id: %2 Sequence Number: %3 First requested: %4 All previous attempts to retrieve the item from offline storage have timed out. To prevent further delays the item will not be indexed. For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp Deletion of item from index abandoned. Index: %1 Saveset Id: %2 Item Sequence Number: %3 Delete Sequence Number: %4 All previous attempts to delete the item from the index have failed. To prevent further failures the item will remain in the index. For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp Index update abandoned. Index: %1 Update started: %2 All previous attempts to process the update request have failed. To prevent further failures the update is being abandoned. For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp The index volume has been marked as failed. Index Volume: %1 Index Volume Path: %2 Reference: %3 %4 Due to repeated errors accessing the index volume it has been marked as 'failed' to prevent further errors. The index volume will remain inaccessible until it has been repaired. For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp

Completed index volume update Index Volume: %1 Index Volume Path: %2 Job Id: %3 Job Author: %4 Job Description: %5 Job elapsed time: %6 (hours:minutes:seconds) Processing time: %7 (hours:minutes:seconds) Number of items added: %8 Number of items additions abandoned: %9 Number of items deleted: %10 For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp Aborted index volume update Reason: %1 Aborted by: %2 Index Volume: %3 Index Volume Path: %4 Job Id: %5 Job Author: %6 Job Description: %7 Job elapsed time: %8 (hours:minutes:seconds) Processing time: %9 (hours:minutes:seconds) Number of items added: %10 Number of items additions abandoned: %11 Number of items deleted: %12 For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp

The index contains too many volume sets for a federated search. Index: %1 Number of Volumes: %2 Maximum number of volumes: %3 For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp

Index volume update in progress Index Volume: %1 Percentage completed: %2 Estimated time of completion: %3 Index Volume Path: %4 Job Id: %5 Job Author: %6 Job Description: %7 Job elapsed time: %8 (hours:minutes:seconds) Processing time: %9 (hours:minutes:seconds) Number of items added: %10 Number of items additions abandoned: %11 Number of items deleted: %12 For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp

The count of failed items in the log file does not match the number recorded in the directory database. The Indexing service will use the count that is in the log file to update the database. Run the IndexCheck tool against this index volume to ensure that the log file is up to date. Index Volume: %1 Index Volume Path: %2 Log File: IndexMissiing.log Number of failed items in the log file: %3 Number of failed items recorded in the database: %4 For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp

The sequence number read from the failed items log does not correspond to the Saveset ID specified in the file. The item will not be repaired. Index Volume: %1 Sequence Number: %2 Expected Saveset ID: %3 Actual Saveset ID: %4 For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp

Update of indexed item abandoned. Index: %1 Saveset Id: %2 Item Sequence Number: %3 %Update Sequence Number: %4 All previous attempts to update the indexed item have failed. No further attempts will be made to update the item. For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp

Failed to commit Index updates to disk. Reason: %1 Index Id: %2 Index Path: %3 Available Disk Space: %4 Number of Items added: %5 Number of Items deleted: %6 Number of Items updated: %7 Number of new words: %8 Additional Info: %9 %10 For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp Index volume update in progress Index Volume: %1 Percentage completed: %2 Estimated time of completion: %3 Index Volume Path: %4 Job Id: %5 Job Author: %6 Job Description: %7 Job elapsed time: %8 (hours:minutes:seconds) Processing time: %9 (hours:minutes:seconds) Number of items added: %10 Number of items additions abandoned: %11 Number of items deleted: %12 Number of items updated: %13 For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp Aborted index volume update Reason: %1 Aborted by: %2 Index Volume: %3 Index Volume Path: %4 Job Id: %5 Job Author: %6 Job Description: %7 Job elapsed time: %8 (hours:minutes:seconds) Processing time: %9 (hours:minutes:seconds) Number of items added: %10 Number of items additions abandoned: %11 Number of items deleted: %12 Number of items updated: %13 For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp Completed index volume update Index Volume: %1 Index Volume Path: %2 Job Id: %3 Job Author: %4 Job Description: %5 Job elapsed time: %6 (hours:minutes:seconds) Processing time: %7 (hours:minutes:seconds) Number of items added: %8 Number of items additions abandoned: %9 Number of items deleted: %10 Number of items updated: %11 For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp

Enabling additions, deletions, and updates because the index location is no longer in backup mode. Index Location: %1 Status: %2 For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp

Failed to register the handler for the Vault Directory Service service control requests, error code '%1'. The Vault Directory Service will not be started. This message is generated when registering the Vault Directory Service as an NT Service, a failure occurred when registering the function to handle service control requests.

A Vault Directory Service Interface pointer is in use when all pointers are being freed. During system clean up an attempt was made to free all the Vault Directory Service Interface Pointers. One was found that was marked as still being used by a thread. All pointers at this point should be marked as unused.

The EnterpriseVault.DirectoryVault object reported an error. %1 <br>e.g.<br> The EnterpriseVault.DirectoryVault object reported an error. <br> A call to the system function SafeArrayGetElement() failed with<br> The parameter is incorrect.<br> Internal reference: GAV<br>

Failed to create the Vault Directory Database. Check the following: 1. Check the SQL Account and password are correct. 2. There is sufficient disk space on the specified drive. 3. The Enterprise Vault Directory Service is running. 4. ODBC is installed

Failed to gather information from the SQL Database Server. Check the following: 1. The Enterprise Vault Directory Service is running. 2 The "EnterpriseVaultDirectory" ODBC System DSN exists. 3. Check the SQL Account and password are correct. Failed to determine whether the Vault Directory Database is empty. The database must be empty before it can be deleted. Check the following: 1. The Enterprise Vault Directory Service is running. 2. The "EnterpriseVaultDirectory" ODBC System DSN exists. 3. Check the SQL Account and password are correct.

The archive '%1' cannot be deleted because a SharePoint Site Collection is using it. You must delete the Site Collection from Enterprise Vault before you can delete this archive. For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp The Directory Service is waiting for another Directory Service to complete an update of the EnterpriseVaultDirectory database, or waiting to get exclusive access to the EnterpriseVaultDirectory database. Please ensure no applications, for example SQL Enterprise Manager or SQL Query Analyzer, are accessing the EnterpriseVaultDirectory database. %1 For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp

Failed to reset the EnterpriseVaultDirectory database into multi user access mode. Use a SQL utility, such as Enterprise Manager, to set unrestricted access. For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp Vault Store '%1' cannot be deleted because it is associated with an Organizational Unit. You must assign a different Vault Store to the Orgnaizational Unit before you can delete the Vault Store. For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp

The Directory Service has started the automatic upgrade of the EnterpriseVaultDirectory Database. The Directory Service will become fully operational when the upgrade is complete. For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp

The archive '%1' cannot be deleted because a Lotus Domino Server target is using it. Change the Lotus Domino Server target to use another archive. For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp Vault Store '%1' cannot be deleted because it contains archives that are associated with Lotus Domino Server targets. Change the Lotus Domino Server target to use an archive from a different Vault Store. For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp The upgrade from Services to Tasks is flagged as incomplete, this may mean that the system may not be providing the same function as prior to upgrade. Check the current configuration and logs, once any issues have been resolved re-run the configuration wizard to complete the upgrade For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp The archive '%1' cannot be deleted because a Domino Journal Mailbox target is using it. Change the Domino Journal Mailbox target to use another archive. For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp Vault Store '%1' cannot be deleted because it contains archives that are associated with Domino Journal Mailbox targets. Change the Domino Journal Mailbox target to use an archive from a different Vault Store. For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp

Vault Store '%1' cannot be deleted because it is associated with an Exchange Server. You must assign a different Vault Store to the Exchange Server before you can delete the Vault Store. For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp Vault Store '%1' cannot be deleted because it is associated with an Exchange Provisioning Group. You must assign a different Vault Store to the Exchange Provisioning Group before you can delete the Vault Store. For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp Failed to download the Authorization Store from the directory database. Because of this you can use the Administration Console only from the Vault Service account. For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp

The Directory Service is running on Windows 2000 and the Windows 2000 Authorization Manager Runtime is not installed. Role Based Administration will not be available until the Windows 2000 Authorization Manager Runtime component is installed. Until then, only users running under the Vault Service Account will be able to administer Enterprise Vault. For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp Vault Store '%1' cannot be deleted because it is associated with a Domino Server. You must assign a different Vault Store to the Domino Server before you can delete the Vault Store. For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp Vault Store '%1' cannot be deleted because it is associated with a Domino Provisioning Group. You must assign a different Vault Store to the Domino Provisioning Group before you can delete the Vault Store. For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp The Enterprise Vault Domino Server '%1' could not be contacted. It has been removed from the list of active servers for domain '%s2'. Ensure that this server can be reached over the network and is operating correctly. The server will be added to the active list shortly after connectivity is restored, or when the Domino server is restarted. If necessary you can increase the connection failure limit by setting the EVDomSvrMaxFailures registry value. See the documentation for further details. For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp

Failed to upgrade the roles-based administration database. Microsoft.Interop.Security.AzRoles.dll (version 1.0.0.0) is not registered on this machine. This file is distributed by Microsoft as part of the Windows 2000 Authorization Manager Runtime. For registration instructions, see the RUNTIME_REQUIREMENTS.txt file. For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp

Enterprise Vault could not initialize the Lotus Notes runtime. Users will not be able to access their Domino archives until this problem is resolved. Ensure that the Notes client is installed on this computer and restart the Directory Service. For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp Enterprise Vault has checked the following third-party registry setting and found it does not match the third-party's recommendation. Reference : %1 Key : %2 Value Name : %3 Found 1/0 : %4 Value : %5 To achieve best performance from Enterprise Vault, consider setting this value in accordance with the recommendations. For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp The connection to SQL Server could not be established. The connection will be tried repeatedly until the Directory Service is stopped. SQL Server : %1 For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp

The archive %1 has been moved and cannot be deleted because it is currently registered as being in use. All client applications must have unregistered their interest with this archive before it can be deleted. For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp

Vault Store '%1' cannot be deleted because it contains archives that have been moved and are currently registered as being in use. All client applications must have unregistered their interest with these archives before you can delete the Vault Store. For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp

The function %1 could not create an ADO Connection to the Vault Database '%2' because this context already has an active connection. This warning is generated if the client application attempts to open an ADO connection when one already exists.

An error was detected while accessing the Vault Database '%2' (Internal reference: %3), error code <%1>. SQL Command: %4 <br>e.g.<br> An error was detected while accessing the Vault Database 'EVSales' (Internal reference: ADODataAccess.cpp (CADODataAccess::AddRecord) [lines {336,337}] built Jul 7 11:45:12 2004), error code <0x80040e14>.<br> SQL Command:<br> INSERT INTO Saveset (ArchivePointIdentity,ArchivedDate,IdChecksumHigh,IdChecksumLow,IdDateTime,IdPartition,IdTransaction,IdUniqueNo,IndexSeqNo,ItemSize,RetentionCategoryIdentity,VaultIdentity ) VALUES ( 51,GETDATE(),1922000,0,CONVERT(datetime,'20030827 19:54:37:000',121),6,'30294952-1791-417D-BDE6-290BB3283590',0,238849,26,4,58)

An error was detected while accessing the Vault Database '%2' (Internal reference: %8): Description: %1 SQL Command: %9 Additional Microsoft supplied information: Source: %3 Number: %4 SQL State: %5 Native Error: %6 HRESULT %7 <br>e.g.<br> An error was detected while accessing the Vault Database 'EVTargetedVS' (Internal reference: BT3): <br> Description: <br> [Microsoft][ODBC SQL Server Driver][DBNETLIB]ConnectionWrite (send()). <br> SQL Command: N/A An error was detected while accessing the Vault Database '%2' (Internal reference: %7): Description: %1 SQL Command: %8 Additional Microsoft supplied information: Source: %3 Number: %4 SQL State: %5 Native Error: %6 <br>e.g.<br> An error was detected while accessing the Vault Database 'EVStore1' (Internal reference: ADODataAccess.cpp (CADODataAccess::ExecuteSQLCommand) [lines {1085,1087,1090,1132,1133,1148}] built Dec 9 17:50:56 2003): Description: [Microsoft][ODBC SQL Server Driver][SQL Server]Could not allocate space for object 'JournalArchive' in database 'EVStore1' because the 'PRIMARY' filegroup is full.

The SQL database server detected a deadlock while accessing the Vault Database '%2' Description: %1 Additional Microsoft supplied information: Source: %3 Number: %4 SQL State: %5 Native Error: %6 HRESULT %7 SQL Command: %8

e.g.<br> The SQL database server for EVTargetedVS is not available: Check that the SQL Server is valid and is running <br> Internal reference(BT3) Description: <br> [Microsoft][ODBC SQL Server Driver][DBNETLIB]General network error. Check your network documentation. <br> Additional Microsoft supplied information: <br> Source: Microsoft OLE DB Provider for ODBC Drivers Number: 0x8004d008 SQL State: 08S01 Native Error: 00000011 HRESULT 0x8004d008 %10: ADO Pool: Pool Statistics: Number of pool connections: %1 Number of requests: %2 Number of connection used: %3 Number of requests delayed: %4 Maximum retry: %5 Percentage of requests delayed: %6 Total waiting time: %7 (millisecond) Average waiting time for requests delayed: %8 (millisecond) Average waiting time for all requests: %9 (millisecond)

e.g.<br> An error was detected while accessing the Vault Database 'EnterpriseVaultDirectory'. If multiple instances of SQL Server exist ensure the correct instance was specified (Internal reference: CC1): <br> Description: [Microsoft][ODBC SQL Server Driver][Shared Memory]SQL Server does not exist or access denied.<br> SQL Command: N/A <br> Additional Microsoft supplied information:<br> Source: Microsoft OLE DB Provider for ODBC Drivers<br> Number: 0x80004005 <br> SQL State: 08001 <br> Native Error: 00000017 <br> HRESULT 0xc0043433<br>

The following folders have exactly the same Vault properties: (a) %1 (b) %2 Possible causes (and their outcome) of this problem: 1) Folder (a) is a copy of (b). A new Vault will be created for the folder (a) 2) Folder (a) has been renamed and a new folder (b) created with the original pathname. The original Vault for folder (a) will no longer have its permissions automatically synchronized and items in this folder may not be available to all its subscribers. A new Vault will be created for both folders (a) and (b).

The SPS service cannot start because the required version of MAPI is missing or incorrectly configured on the Enterprise Vault server: To resolve the problem: 1. Stop all Enterprise Vault services and processes that are using MAPI. 2. Ensure that a version of MAPI supplied with Microsoft Outlook 2003 or later is installed and correctly configured on the Enterprise Vault server. 3. Restart the Enterprise Vault services. If the problem persists, see the "Troubleshooting" section of the Enterprise Vault Administration help file for guidelines on how to proceed. For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp

Downloaded file is not the expected size: Url: %1, Content length: %2 bytes File: %3, Size: %4 bytes <br>e.g.<br> http://uk01.lfc.local/EnterpriseVault/download.asp?VaultID=120B6E2C99D16664C8DD661D2A36CA6FB1110000uk01.lfc.local&SavesetId=199000000000000~200305300846020000~0~A95EFEA3F9274A10BFE41B9FBC56BB3&Request=NativeItem&EVHeaders=1, Content length: 106406912 bytes File: \\?\E:\LARGE_FILES\CENTERA TEST\EVPS_7100_3152_200552011371.tmp, Size: 104857600 bytes

Files archived with delete on delete and/or delete on recall policy flag as set will be deleted from archive when placeholder is deleted/recalled respectively. This may result in data loss. For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp

Failed to determine whether to delete an archived file following the deletion of its placeholder. The archived item will not be deleted. For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp Failed to update the "Delete archived file when placeholder is deleted" cache. The archived item will not be deleted when its placeholder is deleted. For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp

Failed to create the thread for updating the "Delete archived file when placeholder is deleted" cache. The archived item will not be deleted when its placeholder is deleted. For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp The thread for updating the "Delete archived file when placeholder is deleted" cache failed. The archived item will not be deleted when its placeholder is deleted. For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp

Data collection parameters mismatch. This agent's parameters are DAYSOLD=%2, MBLARGE=%1. Data collection repository's parameters are DAYSOLD=%3, MBLARGE=%4. For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp

The following files had at least one invalid date: %1 The date on the file has not been changed. In the FSA Reporting database, Enterprise Vault has used the most appropriate of the following dates for the file: %t01-Jan-1753 %t31-Dec-9999 For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp

Archive information for reporting object : \\%1\%2 is empty. This could be either because of no data archived from this drive or there is an error while getting the archive information. For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp

The FSAReportingService process will be shut down because there is insufficient disk space on drive %1. Delete any unwanted files from the drive and then restart the process as follows. On file servers on which the FSA Agent is installed, restart the Enterprise Vault File Collector Service. Otherwise, restart the Enterprise Vault Admin Service on the Enterprise Vault server. For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp

FSA Reporting cannot work on this file server. The version of Enterprise Vault that is on the Enterprise Vault server is older than the version of the FSA Agent that is on this file server. Upgrade the Enterprise Vault server to a compatible version. For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp

Failed to open the registry key 'Reporting' at 'HKEY_LOCAL_MACHINE \Software\KVS\Enterprise Vault\FSA'. FSAReportingService.exe will stop. FSA Reporting cannot scan this computer. For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp

EVSVR has detected an ERROR_PATH_NOT_FOUND error and has verified that this error is not due to a device error. The path is not found. For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp

Enterprise Vault could not migrate an item from a PST to an archive. Check the migration report once the migration has completed. PST: %1 Subject: %2 Folder: %3 Archive Name: %4 Archive ID: %5 Error: %6 For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp

There was an error verifying a Partition Network Share. Error: %1 Details of the last partition that was processed: VaultStore: %2 Partition: %3 Partition Root Path: %4 Secondary Storage Location: %5 For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp

The folder attributes for the folder: {0} could not be accessed as access was denied.\n\nThis folder and its subfolders will be excluded from archiving\n\nSee the Administrator Help for more information. <BR>E.G.<BR> The folder attributes for the folder: \\users\e$\vol5\DOWDEP\Car\ could not be accessed as access was denied. This folder and its subfolders will be excluded from archiving See the Administrator Help for more information.

e.g.<br> There are 5000 savesets that have not yet been backed up or replicated for Vault Store 'Default'. Review your procedures and make any changes needed to ensure that backups happen in a timely fashion. If you are using an EMC Centera, check the size of the Centera replication queue.

The SQL database for Vault Store '{0}' has not been backed up for {1} days. The information in this database is at risk until the database has been backed up.\n\nReview your SQL database backup procedures and make any changes needed to ensure that backups happen in a timely fashion.The SQL database transaction log for Vault Store '{0}' has not been backed up for {1} days. The information in this database is at risk until the database has been backed up.\n\nReview your SQL database backup procedures and make any changes needed to ensure that backups happen in a timely fashion.The SQL database transaction log for Vault Store '{0}' has used {1}% of its allocated space.\n\nThe information in this database is at risk until the database has been backed up.\n\nReview your SQL database backup procedures and make any changes needed to ensure that backups happen in a timely fashion.\n\nEnsure that your database is adequately sized for the transactions taking place during an archive run.\n\nAlso check that there is enough disk space available to accommodate any growth in your database and database transaction log files.The Enterprise Vault Directory database has not been backed up for {0} days. The information in this database is at risk until the database has been backed up.\n\nReview your SQL database backup procedures and make any changes needed to ensure that backups happen in a timely fashion.The SQL database transaction log for the Enterprise Vault Directory database has not been backed up for {0} days. The information in this database is at risk until the database has been backed up.\n\nReview your SQL database backup procedures and make any changes needed to ensure that backups happen in a timely fashion.The Directory database transaction log has used {0}% of its allocated space.\n\nThe information in this database is at risk until the database has been backed up.\n\nReview your SQL database backup procedures and make any changes needed to ensure that backups happen in a timely fashion.\n\nEnsure that your database is adequately sized for the transactions taking place during an archive run.\n\nAlso check that there is enough disk space available to accommodate any growth in your database and database transaction log files.

There are&nbsp;513935 savesets that are waiting to be indexed and/or waiting to be backed up or replicated in Vault Store 'EXUSNY2'. Check that your Indexing and Storage services are running. Review your procedures and make any changes needed to ensure that backups happen in a timely fashion. If you are using an EMC Centera, check the size of the Centera replication queue.

There are {0} items pending restoration for Vault Store '{1}'.\n\nCheck that the StorageRestore process is running.\n\nIf necessary, slightly increase the number of Restore processes or threads. The settings are on the Advanced tab of the Storage Service's properties.

The File Server Archive Manager cannot start because the required version of MAPI is missing or incorrectly configured on the Enterprise Vault server:\n\nTo resolve the problem:\n\n1. Stop all Enterprise Vault services and processes that are using MAPI.\n2. Ensure that a version of MAPI supplied with Microsoft Outlook 2003 or later is installed and correctly configured on the Enterprise Vault server.\n3. Restart the Enterprise Vault services.If the problem persists, see the "Troubleshooting" section of the Enterprise Vault Administration help file for guidelines on how to proceed.

<p>File archiving on {0} reported {1} errors. See report file for details. </p> <p>e.g.</p> <p>File archiving on <a href="file://\\filesrv1.daa.bankuk.com">\\filesrv1.daa.bankuk.com</a> reported 4148 errors. See report file for details. <br /><br /></p>

The Exchange mailbox provisioning task was aborted during processing. Unprocessed mailboxes do not have the latest policy settings, and any new mailboxes that were not processed cannot be enabled.\n\nRun the task again.\n\nTask: {0}\n\nDomain: {1}The Exchange mailbox provisioning task found a new mailbox with an existing entry in the Enterprise Vault database. The mailbox GUID does not match the entry in the database.\n\nTask: {0}\n\nMailbox: {1}\n\nSet the SynchInMigrationMode registry value in order to process this mailbox. See the documentation for further details.

{0}The Exchange mailbox provisioning task created a new entry in the Enterprise Vault database for a new mailbox that had an existing entry in the database. The existing entry has been renamed.\n\nTask: {1}\n\nNew mailbox: {2}\n\nExisting entry renamed to: {3}\n\n{4}

<p>The Exchange mailbox provisioning task failed during processing of a mailbox. The task is continuing. Task: {0} User: {1} Mailbox: {2} Provisioning group: {3} Group member: {4} Error: {5} Trace: {6} </p> <p>e.g.</p> <p><font face="Courier New" size="4">The Exchange mailbox provisioning task failed during processing of a mailbox. The process will continue.<br /><br />Error: SqlDateTime overflow. Must be between 1/1/1753 12:00:00 AM and 12/31/9999 11:59:59 PM.</font> </p>

The Exchange mailbox provisioning task found some mailboxes that are not eligible for processing by this task.\n\nThis task will process mailboxes on every Exchange Server in this domain that has been added to the Administration Console.\n\nIf you want this task to process such mailboxes, add the host Exchange Server to the Administration Console.\n\nSee the provisioning task report for further details.\n\nTask: {0}\n\nDomain: {1}

The Exchange mailbox provisioning task failed to read required information from Active Directory. The task has stopped. Ensure that the Active Directory server is operational and the account the task is using to log on has read access to the required objects. Then run the task again.\n\nTask: {0}\n\nDomain: {1}\n\nProvisioning group: {2}\n\nGroup member: {3}\n\nAD server: {4}\n\nError: {5}

The Exchange mailbox provisioning task failed to read required information from an Active Directory object. The task has stopped. Ensure that the account the task is using to log on has read access to the object and that the object has the required properties. Then run the task again.\n\nTask: {0}\n\nDomain: {1}\n\nProvisioning group: {2}\n\nGroup member: {3}\n\nAD server: {4}\n\nError: {5}<p>e.g.</p><font size="1"> <p><font size="3">The Exchange mailbox provisioning task found enabled mailboxes that are not part of a provisioning group. These mailboxes cannot be archived. If you do not want these mailboxes to be archived, use the Administration Console to disable them. See the provisioning task report for further details (full reports only).</font></p> <p><font size="3">Task: Exchange Provisioning Task for enterprise.veritas.com</font></p> <p><font size="3">Domain: enterprise.acme.com</font></p></font>

The Exchange mailbox provisioning task failed to process a mailbox store. Mailboxes on this store have not been provisioned.\n\nCheck that this mailbox store is operational. See the provisioning task report for a list of the affected mailboxes.\n\nTask: {0}\n\nDomain: {1}\n\nMailbox store: {2}\n\nError: {3}

The Exchange mailbox provisioning task could not connect to a domain controller for a domain in the forest. The task cannot process any Active Directory objects from this domain.\n\nTask: {0}\n\nDomain: {1}\n\nFailed domain: {2}\n\nError code: {3}The Exchange mailbox provisioning task found some mailboxes that are not eligible for processing by this task.\n\nThis task will process mailboxes on every Exchange Server in this domain that has been added to the Administration Console.\n\nIf you want this task to process such mailboxes, add the host Exchange Server to the Administration Console.\n\nTo include the names of these mailboxes in the provisioning task report, set the 'DisableExternalMbxLogging' registry value to 0.\n\nTask: {0}\n\nDomain: {1}

{0}The Exchange provisioning task found a mailbox with duplicate entries in the Enterprise Vault database, and automatically removed the duplicates. The default Vault ID of the most recent entry has been selected for this mailbox.\n\nThe mailbox is not currently enabled for client-side PST migration. You may wish to review this setting to confirm that it is correct.\n\nTask: {1}\n\nDomain: {2}\n\nMailbox: {3}\n\nEntryID: {4}\n\nDefault Vault ID: {5}\n\nDuplicate entries removed: {6}\n\nAssociated default Vault IDs: {7}{0}The Exchange provisioning task found a mailbox with duplicate entries in the Enterprise Vault database, and automatically removed the duplicates. The default Vault ID of the most recent entry has been selected for this mailbox.\n\nSome PST files were associated with one or more of the deleted entries. You may need to amend the database to associate the PST files with the new entry for this mailbox - contact support if required.\n\nThe mailbox is not currently enabled for client-side PST migration. You may wish to review this setting to confirm whether it is correct.\n\nTask: {1}\n\nDomain: {2}\n\nMailbox: {3}\n\nEntryID: {4}\n\nDefault Vault ID: {5}\n\nDuplicate entries removed: {6}\n\nAssociated default Vault IDs: {7}

Could not contact the Enterprise Vault Domino Gateway server '{0}' ('{1}') in domain '{2}'.\n\nThis server has been marked as unavailable and will not be used until it becomes available. Check that the server is operating correctly and can be reached over the network, then run the provisioning task.There are no available Enterprise Vault Domino Gateway servers in domain '{0}'.\n\nUsers will not be able to view shortcuts or search archives until this problem is resolved. Check that the Enterprise Vault Domino Gateway servers for this domain are operating correctly and can be reached over the network, then run the provisioning task.

Domino server '{0}' has moved from cluster '{1}' to '{2}'.\n\nThis server was the Enterprise Vault preferred server in its previous cluster, but has not been set as the preferred server in the new cluster. Review the Enterprise Vault cluster settings and update if required.

<p>There was an error processing an item in a mailbox. The task will process the item again on the next archiving run. Task: {0} Mailbox: {1} NoteID: {2} Subject: {3} Error: {4} Trace: {5} </p> <p>e.g.</p> <p>There was an error processing an item in a mailbox. The task will process the <br />item again on the next archiving run.</p> <p>Task: Domino Mailbox Archiving Task</p> <p>Mailbox: 'SERVER/ACME1!!mail\dowd'-CN=Elwood <a href="mailto:Dowd/O=ACME1@MYDOMAIN">Dowd/O=ACME1@MYDOMAIN</a></p> <p>NoteID: 110e</p> <p>Subject: &lt;unavailable&gt;</p> <p>Error: Error(3637): Unable to open note 110e - Cannot convert MIME message to <br />Notes Rich Text message.</p> <p>Trace:&nbsp;&nbsp;&nbsp; at DomNote.Open()<br />&nbsp;&nbsp; at LotusDominoMailboxArchivingTask.BaseQItem.OpenNote()<br />&nbsp;&nbsp; at LotusDominoMailboxArchivingTask.ArchiveQItem.Process()</p> <p></p>There was an error processing an item in a mailbox. The task has previously failed to process this item on several occasions. This item will not be processed again.\n\nTask: {0}\n\nMailbox: {1}\n\nNoteID: {2}\n\nSubject: {3}\n\nError: {4}\n\nTrace: {5}

There was an error processing a mailbox. The task will process the mailbox again on the next archiving run.\n\nCheck that the Domino administrator account for the server '{0}' has a cross-certificate for the organization '{1}'.\n\nTask: {2}\n\nMailbox: {3}\n\nError: {4}

Enterprise Vault encountered an SQL Error while retrieving a set of mail files. If the retry is not successful then the remaining mail files in this Domain will not be processed in this archiving run.\n\nDomain: {0}\n\nRetry: {1}\n\nLowest MailboxId: {2}

Enterprise Vault found encrypted notes in the Domino journal that do not appear to be encrypted by a user and that could not be decrypted by the journaling ID.\n\nCheck that you are using the correct journaling ID for this journal database. If you would like to archive these notes in their encrypted form, set the DominoJournalArchiveNonDecryptableNotes registry value to 1. See the documentation for further details.\n\nTask: {0}\n\nJournal database: {1}\n\nJournaling ID: {2}\n\nNote IDs: {3}

The Active Directory objects that hold information for Exchange Managed Folders are unavailable. This may be a problem with account permissions. See 'Installing and Configuring' for information on the Vault Service account permissions.\n\nObject: {0}The Content Cache Request Manager failed to process a client request because of one or more of the following: \n * Cache Location (Set in Server Properties)\n * 'Maximum Cache Size' (Set in Server Properties)\n * 'Maximum Concurrent Vault Cache Updates' is set to 0 (Set in Server Properties)\n * The Directory Service is unavailable\n * The Storage Service is unavailable\n\n The Content Cache Request Manager will work in 'offline' mode until the problem is fixed.

An enabled mailbox could not be found on the mail server. The mailbox may have been deleted.\n\nEnterprise Vault has disabled this mailbox. You can re-enable the mailbox if the mailbox was only temporarily removed from the server.\n\nTask: {0}\n\nUser name: {1}\n\nMailbox name: {2}

The following Domino mailbox has not been synchronized in the last {0} days. The user associated with the mailbox is not in the Domino directory. Enterprise Vault has disabled this mailbox.\n\nMailbox: {1}\n\nUser: {2}\n\nLast synchronized: {3}

The SQL database for Vault Store Group '{0}' has not been backed up for {1} days. The information in this database is at risk until the database has been backed up.\n\nReview your SQL database backup procedures and make any changes needed to ensure that backups happen in a timely fashion.The SQL database transaction log for Vault Store Group '{0}' has not been backed up for {1} days. The information in this database is at risk until the database has been backed up.\n\nReview your SQL database backup procedures and make any changes needed to ensure that backups happen in a timely fashion.The SQL database transaction log for Vault Store Group '{0}' has used {1}% of its allocated space.\n\nThe information in this database is at risk until the database has been backed up.\n\nReview your SQL database backup procedures and make any changes needed to ensure that backups happen in a timely fashion.\n\nEnsure that your database is adequately sized for the transactions taking place during an archive run.\n\nAlso check that there is enough disk space available to accommodate any growth in your database and database transaction log files.

There was an error processing an item in a database. The task has previously failed to process this item on several occasions. This item will not be processed again.\n\nTask: {0}\n\nDatabase: {1}\n\nNoteID: {2}\n\nSubject: {3}\n\nError: {4}\n\nTrace: {5}

Error: the system default codepage must be set to English. It is currently set to {0}.\n\nTo fix this problem, use Regional and Language Options in the Windows Control Panel to set the language for non-Unicode programs to English (United States).\n\nContact support for further information.

Move archive has detected an error occurred when the items in the destination archive were being verified following a backup.\nThe maximum retry threshold has been reached and Archive moves will no longer attempt to re-copy any further items.\n\nPlease check the event log on the Enterprise Vault server where the destination archive is located.\nPlease check the Move archive log file on the Enterprise Vault server where the source archive is located.\n\nThe move archive documentation contains more information about setting the threshold for the maximum number of retries.\n\nSource archive: {0}\n\nDestination archive: {1}\n\nDestination Vault Store: {2}Move archive detected a storage error while the items in the destination archive were being verified following a backup. Check the event log on the Enterprise Vault server that hosts the destination archive.\n\nUnless the maximum number of retries has been exceeded, move archive will re-copy the items, wait for the items to be backed up, then repeat the verification.\n\nSource archive: {0}\n\nDestination archive: {1}.\n\nDestination Vault Store: {2}

Move archive cannot move this item because it already exists in another archive in the destination vault store.\n\nItem: {0}\n\nSource archive: {1}\n\nDestination vault store: {2}\n\nSelected destination archive: {3}\n\nArchive that contains the duplicate: {4}\n\nEnterprise Vault will try again later unless the retry count has been reached.\n\nFor more information about the handling of duplicate items, see the Administrator's Guide.

The NetApp Placeholder Service is configured to run under the Local System account. It should be configured to run under the Vault Service Account. For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp

The slave process for the NetApp placeholder named: %1 has failed and will NOT be restarted as it has exceeded %2 restarts in %3 minutes For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp

The slave process for the NetApp placeholder named: %1 is not responding and will NOT be restarted as it has exceeded %2 restarts in %3 minutes For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp

The slave process for the NetApp placeholder server named: %1 has requested a restart but will NOT be restarted as it has exceeded %2 restarts in %3 minutes For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp

File successfully recalled but the last-modified date does not match the original date. The file may be archived again as a new version. File: %1 For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp

The custom filter could not add any rule sets. Please check the XML files are available in '%4'. Error: %1 Internal References: %2 %3 For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp An error has occurred when adding a custom rule set. This error may be caused by incorrect XML syntax. Error: %1 Internal References: %2 %3 For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp

An error has occurred when adding custom rule set '%1'. Requested retention category '%2' does not exist. Please check that the custom rule set references existing retention categories only. For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp An error has occurred when adding custom rule set '%1'. Requested archive '%2' does not exist. Please check that the archive specified has been created in Enterprise Vault. For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp

The custom properties definition file could not be found - custom property indexing and categorisation functionality has been disabled. For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp

An error has occurred when adding a custom rule set. The distribution list '%1' requested is ambiguous in the Exchange server. Could not resolve name to a single distribution list. Check for distribution lists with the same display name. For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp An error has occurred when adding a custom rule set. The distribution list '%1' requested could not be found. (Is the spelling correct?) For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp

IArchivingControl2::MAPISaveChanges() is not supported when using get_CDOMessage or get_CDOMessageEnvelope. If the filter changes message properties or attachments you must use get_MAPIMessage and/or get_MAPIMessageEnvelope. For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp The CDO components are not installed on the Enterprise Vault server. A filter has requested access to a message using CDO. This type of access is supported only when Outlook 2003 is installed on the Enterprise Vault server. Resolution: Install Outlook 2003, including the Collaboration Data Objects, on the Enterprise Vault server. For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp

The following properties must be set before Enable/Disable can be called: Directory, Site, ExchangeServer, SystemMailbox, (MailboxDN or LDAPQuery) For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp

The following properties must be set before ExecuteScript can be called: Directory, ExchangeServer, SystemMailbox, (ScriptFile or ScriptText) For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp

IRestorationAgent->SavesetAvailable() function failed whilst processing the item with TransactionID: %1, SavesetID: %2 <br>e.g.<br> IRestorationAgent->SavesetAvailable() function failed whilst processing the item with TransactionID: G6TR874KF80B11D781D7004769855A8, SavesetID: 5483230000000000~20011191224270000~0~5KFR47DB45DB40069919F64EBA4D40C The user restore request TransactionID: %1, SavesetID: %2 failed whilst being processed by the storage service <br>e.g.<br> The user restore request TransactionID: C7B961F9D8D54E92888E6C12D1A787C, SavesetID: 639000000000000~200401230634000000~0~7E05C940AC664C7C97DB41695CB764F failed whilst being processed by the storage service

Mailbox Report Date: %1 System Name: %2 Mailbox Name: %3 Associated Account: %13 Mailbox State: %18 Mailbox Quota Limit: %14 KB Mailbox Quota Used: %15 KB Percentage of Mailbox Quota free: %16 Number of archivable items in mailbox: %4 Total size of archivable items in mailbox: %5 KB Number of archivable folders in mailbox: %6 Number of items ready to archive: %7 Total size of items ready to archive: %8 KB Number of items that would be archived: %9 Total size of items that would be archived: %10 KB Number of expired shortcuts that would be deleted: %17 Start Time: %11 End Time: %12

An error occurred whilst post processing a message and it could not be changed back from the Archive Pending state. Error that caused the message to be changed back: %1 Error when trying to change the message back: %2 <br>e.g.<br> An error occurred whilst post processing a message and it could not be changed back from the Archive Pending state. Error that caused the message to be changed back: 8004011d Error when trying to change the message back: c0040899

This is an example. Details may be quite different.<p> A queued operation exceeded the retry count and has been discarded<p> Enterprise Vault Journaling Service for ACMEEXCH1<p> m_pIBackgroundArchivingAgent->ProcessItem(Priority = "true",<br> ExchangeSystem = "ACMEEXCH1",<br> m_pILocation,<br> (ULONG)EntryIdSize = 70,<br> EntryId,<br> ArchiveId = "1828E94DA5D483744B6E82329221A153A1110000huyton.zko.acme.com",<br> RetentionCategory= "181667B5FEBDAD3119CAB00508B070AE51b10000huyton.zko.acme.com",<br> UserMailboxDn = "/o=ACME/ou=EENGINEERING/cn=Servers/cn=stewart-journal",<br> MessageTitle = "Tax Return",<br> nRetryCount = 3,<br> NULL,<br> CallerSID,<br> isAReArchive = 0, ArchiveTransId = "5E24F8CD11B14E60A60A8443859FF7F", IndexedPropertiesSet = "");<p> HRESULT: 0x80070057 %2

%1:CArchivingAgent::ProcessUser() Attempt to open the users message store resulted in failure with error message = MAPI_E_FAILONEPROVIDER This is because the mailbox does not exist. This often happens when processing utility accounts like site connectors, or when mailboxes have been deleted after a process mailbox message has been queued

Error opening MSMQ Dead Letter Queue - Access is denied for queue %1 Using MSMQ Explorer, edit the permissions of the Computer on which the queue resides. Ensure that the local Administrators group has "Full Control" access. The computer properties to modify will be those of the system on which this error is logged. This can be verified by checking that the ID of the computer (displayed within the General tab of the Computer properties) corresponds with the queue name within this message

An unexpected timeout occurred while attempting to access a queued message. This may have occurred because a message was not on a queue as expected or because the system is heavily loaded, thus causing excessive MSMQ delays. If you suspect the problem is caused by MSMQ delays, try increasing the Enterprise Vault "QueueTimeout" registry value, as described in the "Modifying Registry Settings" section in the Troubleshooting section of the Administrator help.

MSMQ negative acknowledgment message(s) have been handled. Queue:%1 Reason: The message was purged at the destination queue <br>e.g.<br> MSMQ negative acknowledgment message(s) have been handled. Queue:.\private$\Enterprise Vault Archiving Service for EXCHANGE Admin Queue Reason: The message was purged at the destination queue

The Storage Service is still at its upper MSMQ threshold. The Archiving/Journaling Service will pause for %1 minutes to let it recover. Mailbox %2 will be processed again when the service resumes processing. <br>e.g.<br> The Storage Service is still at its upper MSMQ threshold. The Archiving/Journaling Service will pause for 15 minutes to let it recover. Mailbox /O=ACME /OU=REO/CN=RECIPIENTS/CN=DOWDP will be processed again when the service resumes processing.

An error has occurred whilst processing the Public Folder %1. Check the Event Log for any previous errors, as they may help determine the cause. Error: %2 <br>e.g.<br> An error has occurred whilst processing the Public Folder \ACME\Engineering\Users\Elwood P Dowd\. Check the Event Log for any previous errors, as they may help determine the cause. Error: 0x800B0001

Public Folder Report Date: %1 System Name: %2 Public Folder start point: %3 Number of archivable items (from start point): %4 Total size of archivable items (from start point): %5 KB Number of folders processed: %6 Number of items ready to archive: %7 Total size of items ready to archive: %8 KB Number of items that would be archived: %9 Total size of items that would be archived: %10 KB Number of expired shortcuts that would be deleted: %13 Start Time: %11 End Time: %12

Error reading the legacy message store and mailbox distinguished names from active directory for mailbox %1 The format of the JournalServiceEntry JournalingMailboxDn attribute is incorrect, it should be the active directory distinguished name of the journal mailbox not the Exchange 5.5 legacy mailbox distinguished name. The service will now shut down

The IRestorationAgent->RestoreItem() function failed whilst processing the item with TransactionID: %1, SavesetID: %2 Number of retries: %3 The retrieval request has failed because the associated Saveset could not be found on the spool queue. The retrieval request will now be discarded It is possible that the Saveset has been removed from the spool queue because it has not been received in time. <br>e.g.<br> The IRestorationAgent->RestoreItem() function failed whilst processing the item with TransactionID: 5123104F6ADC42AAB41C617FFE1A3FE, SavesetID: 101310000000000~200304180803140000~0~5303A7CBB67642ACAB2B555CEB49ED7 <br>Number of retries: 30 <br> The retrieval request has failed because the associated Saveset could not be found on the spool queue. The retrieval request will now be discarded <br> It is possible that the Saveset has been removed from the spool queue because it has not been received in time.

Could not get a MAPI session when validating the public folder root path %1 The following error was returned: %2. Please check that the Exchange Server %3 is running and that the Vault Site account has the correct privileges. <br>e.g.<br> Could not get a MAPI session when validating the public folder root path \ACME\IT The following error was returned: 80040111. Please check that the Exchange Server ACMEEXCH1 is running and that the Vault Site account has the correct privileges.

The mailbox %1, has exceeded its "Prohibit Send & Receive" limit and cannot be processed. Maximum allowed: %2 KB Current level : %3 KB If you wish Enterprise Vault to archive items from this mailbox then this quota must be removed. <p>e.g.<br> The mailbox /O=ACME/OU=REO/CN=RECIPIENTS/CN=DOWDP, has exceeded its "Prohibit Send & Receive" limit and cannot be processed.<br> Maximum allowed: 4000 KB<br> Current level : 7000 KB<br> If you wish Enterprise Vault to archive items from this mailbox then this quota must be removed.

The Vault selected on the current folder no longer exists in the Vault Directory. This folder will be set to 'Do Not Archive' and all messages in this folder will be ignored until the folder settings are changed. <p> Details: <br> VaultId: <br>1BD1B1AF49AD8D311ACEE00508B070AE51110000huyton.zko.acme.com <br> Mailbox: /o=ACME/ou=ACMEENGINEERING/cn=ZKO/cn=dowdp <br> Folder: Deleted Items

PF_CheckVaultAvailability has been unable to determine the current Vaults status. Details: VaultId: %2 Mailbox: %3 Folder: %4 Reason: %1 <br>e.g.<br> PF_CheckVaultAvailability has been unable to determine the current Vaults status. Details: VaultId: 1D5A96DEEBB68D61183B000508B319C691110000vault.acme.com Mailbox: /o=ACME/ou=ENGINEERING/cn=Recipients/cn=Journal Folder: Top of Information Store Reason: Not enough storage is available to complete this operation. [0x8007000e]

<font face="Courier New"><span class="FIXEDFONT">The following message could not be archived by the Journaling Service as it may be corrupt. </span><br /><tt><span class="FIXEDFONT">Title: %1</span></tt></font><br /><tt><span class="FIXEDFONT">Mailbox: %2 </span></tt><br /><br /><tt><span class="FIXEDFONT">An error occurred whilst moving the message to the 'Enterprise Vault Journaling Service\Failed to copy' folder. The message has been marked as "Do Not Archive", and no further attempts will be made to archive this message.</span></tt><br />

The following folders have exactly the same Vault properties: (a) %1 (b) %2 Possible causes (and their outcome) of this problem: 1) Public folder (a) is a copy of (b). A new Vault will be created for the public folder (a) 2) Public folder (a) has been renamed and a new folder (b) created with the original pathname. The original Vault for folder (a) will no longer have its permissions automatically synchronized and items in this folder may not be available to all its subscribers. A new Vault will be created for both public folders (a) and (b).

A MSMQ negative acknowledgment message has been processed for a message of type 'PROCESS MAILBOX EX'. The Exchange User Mailbox: %1 on the Exchange system: %2 will not be automatically archived until the next archive scheduled period <br>e.g.<br> A MSMQ negative acknowledgment message has been processed for a message of type 'PROCESS MAILBOX EX'. The Exchange User Mailbox: /O=ACME/OU=ZKO/CN=RECIPIENTS/CN=ELWOODP on the Exchange system: /o=Acme/ou=ZKO/cn=Configuration/cn=Servers/cn=EXCHANGE/cn=Microsoft Private MDB will not be automatically archived until the next archive scheduled period

An error occurred performing a request to synchronize the mailbox %2. Error: %1 <p>e.g.<br> An error occurred performing a request to synchronize the mailbox /o=ACME/ou=ZKOEUROPEENGINEERING/cn=SUP REO/cn=DOWDP. <p> Error: The MAPI error MAPI_E_FAILONEPROVIDER (0x8004011D) has occurred whilst synchronizing the properties of mailbox . The mailbox will not be synchronized until the next scheduled run. [0xc0040ccd]

An error has occurred listing mailboxes on Exchange Server %2 for synchronization. Error: %1 Internal: %3 <br>e.g.<br> An error has occurred listing mailboxes on Exchange Server ACMEEXCH1 for synchronization. <br> Error: The parameter is incorrect. [0x80070057] <br> Internal: AgentExchSynch.cpp (CAgentExchSynch::ListMailboxesExchange2k) [lines {1105,1109,1144}] built Mar 4 14:22:44 2004

Failed to list mailbox permissions whilst synchronizing due to a missing Active Directory attribute. User: %1 Attribute: %2 <br>e.g.<br> Failed to list mailbox permissions whilst synchronizing due to a missing Active Directory attribute. User: CN=Elwood Dowd,OU=Users,OU=ZKO,OU=Sites,OU=US OUs,DC=KVS,DC=local Attribute: msExchMailboxSecurityDescriptor

The following message could not be archived by the Archive/Public Folder Service as it may be corrupt. Title: %1 Mailbox: %2 If you see this warning repeatedly contact KVS Support. <p>e.g.<br> The following message could not be archived by the Archive/Public Folder Service as it may be corrupt. <p> Title: Fwd: Mark in ZKO<br> Mailbox: /o=acme/ou=ZKOEUROPEENGINEERING/cn=SUP REO/cn=Dowdp If you see this warning repeatedly contact KVS Support.

The number of items pending indexing for the archive has grown above the threshold limit. This service will pause for 5 minutes to allow the backlog to clear. Mailbox: %1 Archive Name: %2 Archive Id: %3 Service: %4 <p>e.g.<br> The number of items pending indexing for the archive has grown above the threshold limit. This service will pause for 5 minutes to allow the backlog to clear. <p> Mailbox: /o=ACME/ou=REO/cn=Recipients/cn=journal <br> Archive Name: Journal <br> Archive Id: 43ITR8E453A1ED611BE120002A58CDB441110000ACME.COM<br> Service: Enterprise Vault Journaling Service for ACMEEXCH1<br>

The following message could not be archived by the Journaling Service because of its codepage. Title: %1 Mailbox: %2 An error occurred whilst moving the message to the 'Enterprise Vault Journaling Service\Failed Codepage' folders. The message has been marked as "Do Not Archive", and no further attempts will be made to archive this message. The following message could not be archived by the Journaling Service because distribution list expansion failed. <p> Title: Script review<br> Mailbox: /o=ACME/ou=ZKO/cn=Recipients/cn=E2K <br> MAILBOXES/cn=STEWART <p> No further attempts will be made to archive this message. The message has been moved to the 'Enterprise Vault Journaling Service\Failed DL Expansion' folder.The following message could not be archived by the Journaling Service because distribution list expansion failed. Title: %1 Mailbox: %2 An error occurred whilst moving the message to the 'Enterprise Vault Journaling Service\Failed DL Expansion' folder. The message has been marked as "Do Not Archive", and no further attempts will be made to archive this message. An error occurred processing the external filter '%2'. No more filters will be processed. Error: %1 Mailbox: %3 Message Folder: %4 Message Title: %5 <p>e.g.<br> An error occurred processing the external filter 'KVS.Accelerator.PlugIn.Filter'. No more filters will be processed. <br> Error: No such interface supported [0x80004002] <br> Mailbox: /O=ACME/OU=ZKO/cn=Recipients/cn=Journal-ACME <br> Message Folder: ?Inbox <br> Message Title: Tournament <br><p>e.g.<br> The following message could not be processed by an external filter and has been moved to Journaling Service\Failed External Filter. <br> Mailbox: /O=ACME/OU=ZKO/cn=Recipients/cn=ACME-JOURNAL <br> Title: Tournament <Br> <br> No further attempts will be made to process this message. Mailbox: %1 Title: %2 No further attempts will be made to process this message.

The MAPI error MAPI_E_FAILONEPROVIDER (0x8004011D) has occurred whilst synchronizing the properties of mailbox /o=First Organization/ou=First Administrative Group/cn=Recipients/cn=testdisabled. The mailbox will not be synchronized until the next scheduled run. AgentExchSynch.cpp (CAgentExchSynch::OpenUserAndStore) [lines {1407,1414,1419,1423,1449,1455}] built Feb 11 13:30:13 2004

The task '%1' failed to log on to Exchange server '%2' using mailbox '%3'. Please ensure that the server is running and that the Vault Service account has sufficient permissions on the server. <br>e.g.<br> The task 'Mailbox Archiving Task for ACME1' failed to log on to Exchange server 'ACME1' using mailbox 'EnterpriseVault-ACME1'. Please ensure that the server is running and that the Vault Service account has sufficient permissions on the server.

SMTP Mail Archiving encountered a serious error during initialization and is unable to operate correctly. Incoming messages will not be captured by Enterprise Vault and will be saved in the SMTP server 'drop' directory or relayed to another server. Please restart the IIS Admin service and reconfigure SMTP Mail Archiving. For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp

SMTP Mail Archiving failed to save a captured message because the disk is full. Retry will occur every %1 seconds until the message is saved. This may result in a backlog of messages in the SMTP queue. Message ID: %2 Sender: %3 Recipients: %4 Last filename: %5 For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp SMTP Mail Archiving is continuing to attempt to save a message that failed because the disk is full. Retry will continue every %1 seconds until the message is saved. This may result in a backlog of messages in the SMTP queue. Message ID: %2 Sender: %3 Recipients: %4 Last filename: %5 For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp

SMTP Mail Archiving encountered a serious error and was unable to abort the transport of a captured message. The message will be saved in the SMTP server 'drop' directory or relayed to another SMTP server. Message ID: %1 Sender: %2 Recipients: %3 For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp SMTP Mail Archiving required a server-level default folder to save a captured message but one was not specified. The captured message will be deleted. Reconfigure SMTP Mail Archiving to use a server-level default folder. Message ID: %1 Sender: %2 Recipients: %3 For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp

SMTP Mail Archiving failed to load because a valid license key is not installed. Incoming messages will not be captured and will be delivered to the SMTP drop directory or relayed to another server. See the documentation for information on license keys. For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp

Failed to enable a user mailbox. The system reported 'An invalid directory pathname was passed', this may be because a new user or mailbox has not yet been fully initialized or an existing user or mailbox may have been recently deleted. Task: %2 Mailbox: %1 See the help topic called 'Problems enabling mailboxes' for details of the permissions you need to enable mailboxes. For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp Failed to enable a user mailbox. This could be due to insufficient permissions or the mailbox may have been deleted. Mailbox: %1 See the help topic called 'Problems enabling mailboxes' for details of the permissions you need to enable mailboxes. For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp Failed to disable a user mailbox. This could be due to insufficient permissions or the mailbox may have been deleted. Mailbox: %1 See the help topic called 'Problems enabling mailboxes' for details of the permissions you need to disable mailboxes. For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp The task controller cannot start the following MAPI-dependent tasks because the required version of MAPI is missing or incorrectly configured on the Enterprise Vault server: %1 To resolve the problem: 1. Stop all Enterprise Vault services and processes that are using MAPI. 2. Ensure that a version of MAPI supplied with Microsoft Outlook 2003 or later is installed and correctly configured on the Enterprise Vault server. 3. Restart the Enterprise Vault services. If the problem persists, see the "Troubleshooting" section of the Enterprise Vault Administration help file for guidelines on how to proceed. For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp

The temporary transaction identifier cannot be read or written to a message. Archiving and external filtering may not be able to identify the message as a retry if it requires subsequent archive attempts. Error: %1 Internal References: %2 %3 For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp

<p>e.g.</p><font size="1"> <p><font size="2">Summary for shortcut deletion.</font></p> <p><font size="2">Mailbox: '/o=Enterprise/ou=MDH/cn=ADC/cn=Users/cn=Elwood Dowd':</font></p> <p><font size="2">Total number of shortcuts found: 5132</font></p> <p><font size="2">Number of expired shortcuts deleted: 157</font></p> <p><font size="2">Number of orphaned shortcuts deleted: 0</font></p> <p><font size="2">Number of old shortcuts deleted: 303</font></p> <p><font size="2">Total number of shortcuts remaining: 4672</font></p></font>Summary for shortcut deletion. Public folder '%1': Total number of shortcuts found: %2 Number of expired shortcuts deleted: %3 Number of orphaned shortcuts deleted: %4 Number of old shortcuts deleted: %5 Total number of shortcuts remaining: %6 For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp Enterprise Vault has detected an instance of mailbox DN reuse. Mailbox: %1 Default Vault Id: %2 Exchange Server: %3 Enterprise Vault detected that a mailbox enabled for archiving had been deleted from Exchange and another was subsequently created with the same DN. A fresh entry will be added to Enterprise Vault for the new mailbox. For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp

Mailbox Report Date: %1 System Name: %2 Mailbox Name: %3 Associated Account: %13 Policy: %28 Mailbox State: %20 Mailbox Quota Limit: %14 KB Mailbox Quota Used: %15 KB Percentage of Mailbox Quota free: %16 Number of archivable items in mailbox: %4 Total size of archivable items in mailbox: %5 KB Number of archivable folders in mailbox: %6 Number of items ready to archive: %7 Total size of items ready to archive: %8 KB Number of items that would be archived: %9 Total size of items that would be archived: %10 KB Number of expired shortcuts that would be deleted: %17 Number of orphaned shortcuts that would be deleted: %18 Number of old shortcuts that would be deleted: %19 Start Time: %11 End Time: %12 For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp Public Folder Report Date: %1 System Name: %2 Public Folder start point: %3 Policy: %23 Number of archivable items (from start point): %4 Total size of archivable items (from start point): %5 KB Number of folders processed: %6 Number of items ready to archive: %7 Total size of items ready to archive: %8 KB Number of items that would be archived: %9 Total size of items that would be archived: %10 KB Number of expired shortcuts that would be deleted: %13 Number of orphaned shortcuts that would be deleted: %14 Number of old shortcuts that would be deleted: %15 Start Time: %11 End Time: %12 For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp Mailbox Report Date: %5 System Name: %1 Mailbox Name: %2 Associated Account: %3 Policy: %12 Mailbox State: %4 Number of shortcuts where no action was taken: %11 Number of expired shortcuts that would be deleted: %8 Number of orphaned shortcuts that would be deleted: %9 Number of old shortcuts that would be deleted: %10 Start Time: %6 End Time: %7 For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp Public Folder Report Date: %3 System Name: %1 Public Folder start point: %2 Policy: %10 Number of shortcuts where no action was taken: %9 Number of expired shortcuts that would be deleted: %6 Number of orphaned shortcuts that would be deleted: %7 Number of old shortcuts that would be deleted: %8 Start Time: %4 End Time: %5 For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp

The archive task found mailboxes that have not been processed by the provisioning task. The archive task is ignoring these mailboxes. To log the names of these mailboxes to the event log, reset the 'HideMissingPolicyInfoErrors' registry value to 0. See the documentation for further details. Task: %1 For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp A new mailbox already has an entry in the Enterprise Vault database. New mailbox: %1 Existing entry: %2 Reason for conflict: %3 Set the SynchInMigrationMode registry value in order to process this mailbox. See the documentation for further details. For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp A new mailbox was linked to an existing entry in the Enterprise Vault database. New mailbox: %1 Existing entry: %2 Wait until the archive task has finished processing, then reset the SynchInMigrationMode registry value. See the documentation for further details. For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp A new entry in the Enterprise Vault database has been created for a new mailbox that had an existing entry in the database. The existing entry has been renamed. New mailbox: %1 Existing entry renamed to: %2 Reset the SyncInMigrationMode registry value after all affected mailboxes have been processed. See the documentation for further details. For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp

Enterprise Vault could not enable a mailbox because either the Vault Store or Indexing Service were not specified. Ensure that both the Vault Store and Indexing Service are set on the Provisioning Group, the Exchange Server or the Enterprise Vault Server. Mailbox: %1 For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp Enterprise Vault cannot process this Exchange Server because none of the users on this server has been processed by the provisioning task. Do the following: 1. Ensure that provisioning groups have been defined. 2. Run the provisioning task. 3. Run mailbox synchronization/archiving again. Exchange Server: '%1' For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp This mailbox cannot be processed until the Exchange provisioning task has processed the corresponding user's details. Ensure that a provisioning group includes this user and run the provisioning task. To disable these warnings, set the 'HideMissingPolicyInfoErrors' registry value to 1. See the documentation for further details. Mailbox: %1 Message store: %2 For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp

A new mailbox was found containing Enterprise Vault settings for an existing entry in the Enterprise Vault database. The mailbox has not been linked to the existing entry. Use the 'zap' command in Policy Manager to remove the old Enterprise Vault settings. Mailbox: %1 For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp

Failed to determine the provisioning group for the mailbox %2. This mailbox cannot be processed until the Exchange provisioning task has processed the corresponding user's details. Ensure that a provisioning group includes this user and then run the provisioning task. Error: %1 For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp

This message could not be archived due to it having a conflicting Transaction Id. The conflicting Transaction Id has been removed from the message which will now allow it to be successfully archived on the next archiving run. Item MSMQ Label: %1 For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp

<p>e.g.</p> <p>There were too few archivable items available to take mailbox '/O=ACMEOU=ZKO/cn=Recipients/cn=Dowdp' below the quota-free level of 10%.</p> <div>&nbsp;&nbsp;Quota limit: 200000 KB &nbsp;&nbsp;Quota used: 339062 KB (169% of Quota limit) &nbsp;&nbsp;Required to archive: 158000 KB &nbsp;&nbsp;Actual amount archived: 167 KB</div> <div>&nbsp;You may need to review your mailbox archiving policies to allow more items to be archived if you regularly see this warning for mailboxes.</div>Failed to find configuration information for the %1 Agent in the Directory Service on computer %2 This could be because the Task was deleted before completing all its outstanding work. Task entry id: %3 Further instances of this error will be suppressed. For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp Public folder redirection has been detected. This configuration can adversely affect performance and reliability. This redirection could be either of the following: -The mailbox that is being used to connect to Exchange Server is being redirected to another Exchange Server. -The Public Folder store is not homed locally on the target Exchange Server Exchange Server: %1 Public Folder Task: %2 Redirected to Server: %3 For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp

The following message could not be archived as it seems to have an invalid envelope body. Title: %1 Mailbox: %2 No further attempts will be made to archive this message. The message has been moved to the 'Enterprise Vault Journaling Service\Failed to Copy' folder. For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp The following message could not be archived by the Journaling Service as it seems to have an invalid envelope body. Title: %1 Mailbox: %2 An error occurred whilst moving the message to the 'Enterprise Vault Journaling Service\Failed to Copy' folder. The message has been marked as "Do Not Archive", and no further attempts will be made to archive this message. For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp

The following envelope message could not be archived as the attached message does not appear valid. Title: %1 Mailbox: %2 No further attempts will be made to archive this message. The message has been moved to the 'Enterprise Vault Journaling Service\Failed to Copy' folder. For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp The following envelope message could not be archived as the attached message does not appear valid. Title: %1 Mailbox: %2 An error occurred whilst moving the message to the 'Enterprise Vault Journaling Service\Failed to Copy' folder. The message has been marked as "Do Not Archive", and no further attempts will be made to archive this message. For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp

(To disable these warnings, use the 'HideMovedItemUpdateFailure' registry value. See the documentation for details.) The following item has been moved in the mailbox but it could not be updated in the archive: Mailbox: %2 Folder: %3 Title: %4 Archive folder updated: %5 Retention Category updated: %6 Reason: %1 For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp There were too few archivable items available to take mailbox '%1' below the quota-free level of %2%. Quota limit: %3KB Quota used: %4KB (%5% of quota limit) Previously archived (pending): %8KB Required to archive: %6KB (adjusted %9KB) Amount archived (this run): %7KB You may need to review your mailbox archiving policies to allow more items to be archived if you regularly see this warning for mailboxes. For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp

(To disable these warnings, use the 'HideMovedItemUpdateFailure' registry value. See the documentation for details.) The following item has been copied in the mailbox but it could not be updated in the archive: Mailbox: %2 Folder: %3 Title: %4 Reason: %1 For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp The following message could not be archived by the Journal Task as it may be corrupt. Title: %1 Task: %2 Mailbox: %3 Number of corrupt Journal mailbox messages currently identified: %4 The message cannot be moved to the 'Enterprise Vault Journaling Service\Invalid Journal Report' folder and also cannot be marked as "Do Not Archive". For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp

The shortcut update task could not log on to the Exchange server. Ensure that the mailbox is not hidden, that the server is running and that the Vault Service account has sufficient permissions on the server. Exchange Server: %1 Mailbox: %2 Error: %3 For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp

Could not update shortcut. The archiving task cannot process one or more shortcuts to items that have been migrated from Domino. The RestoreShortcutBody registry value is set. This registry value makes the archiving task rebuild Enterprise Vault shortcuts for Exchange Server messages and shortcuts to items that have been migrated from Domino. The archiving task cannot initialize the Lotus Notes runtime in order to process items that have been migrated from Domino. Check that Lotus Notes is correctly installed on the server that is running the archiving task. Exchange Server shortcuts can be processed correctly. For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp

The task failed to log on to the Exchange Server. The task is running as a Windows user that is a member of the 'domain admins' group. Remove the user from this group to ensure that the task has sufficient access to the Exchange Server. Task: %1 Exchange Server: %2 Windows user: %3 For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp

Example:<p> Enterprise Vault Indexing Service Service startup is delayed pending service synchronization <p> The service depends on one or more Enterprise Vault services and is waiting until they are all fully operational. Service startup will fail if service synchronization takes longer than 30 minutes. Note that the Services Control Panel dialog box will show this service as running even though it is not fully operational <p> The most likely cause of the delay is that the Directory service is not running

%1 Startup is being canceled due to failure of service synchronization The service depends on one or more Enterprise Vault services that have not become fully operational during the service synchronization period The most likely cause of the failure is that the Directory service is not running <br>e.g.<br> Enterprise Vault Public Folder Service - ACME IT is being canceled due to failure of service synchronization The service depends on one or more Enterprise Vault services that have not become fully operational during the service synchronization period. <br> The most likely cause of the failure is that the Directory service is not running

%1 Unable to synchronize with an Enterprise Vault Service. The service is not present in the target computer's NT Services configuration. The Enterprise Vault site may not be fully configured, or the service may have been deleted from the NT Services configuration. Computer: %2 Service database name: %3 Configuration of the Enterprise Vault site should be completed prior to starting this Enterprise Vault service. %1 Unable to synchronize with the Enterprise Vault Indexing Service. There are no Indexing Services configured in the Enterprise Vault site. The Enterprise Vault site may not be fully configured, or the Indexing Services may have been deleted Configuration of the Enterprise Vault site should be completed prior to starting this Enterprise Vault service

The %1 service failed to respond to the STOP request in a timely manner. This may be due to the service getting insufficient CPU time; check subsequent event log entries for a "successfully stopped" message. If the service is still running, manually stop the service and check the event log for any errors logged by the service. <br>e.g.<br> The Enterprise Vault Archiving Service for ACMEEXCH1 service failed to respond to the STOP request in a timely manner. This may be due to the service getting insufficient CPU time; check subsequent event log entries for a "successfully stopped" message. If the service is still running, manually stop the service and check the event log for any errors logged by the service.

Your license file is not valid for this system (wrong HOSTID) Your license file is locked to a particular system, and is only valid on that system. If the license file was created manually, please double check that the license details are for this system. Otherwise, replace the license file with the one supplied to you for this system Enterprise Vault will continue, but with reduced functionality Please contact your license supplier to obtain a valid license An unhandled exception has been raised. Command Line: %1 Process Id: %2 Thread Id: %3 Exception Id: %4 Instruction Address: %5 Stack Trace: %6 Stack Trace(basic): %7 Registers: %8 An exception is raised when a process encounters an unexpected fault. Contact your support representative with details of this and any preceding errors. An unhandled access violation has occurred. <p> Command Line: "C:\Program Files\Enterprise Vault\{server executable}" <br> Process Id: %2<br> Thread Id: %3<br> Exception Id: %4<br> Instruction Address: %5<br> Memory Access Type: %6<br> Memory Address: %7<br> Stack Trace: %8 Stack Trace(basic): %9 Registers: %10 <p> The process has attempted to access a protected memory address. Contact your support representative with details of this and any preceding errors. An exception has been raised. Internal reference %1 %2 An exception is raised when a process encounters an unexpected fault. Contact your support representative with details of this and any preceding errors. <BR>e.g.<br> An exception has been raised. <br> Internal reference Filter.cpp (CFilter::FinalConstruct) [lines {27,31}] built Jun 17 15:39:02 2004 <br> An exception is raised when a process encounters an unexpected fault. Contact your support representative with details of this and any preceding errors.

A C Runtime debug report has been raised. Report Type: %1 Report: %2 Process Id: %3 Command Line: %4 NOTE: The process may be hung awaiting user response to a Windows message box. If the process is not running under the same user account as the current desktop then the message box may not be visible. In this situation it may be possible to investigate the error that generated the debug report by attaching a debugger to the process.

Vault Store: %1 No Partition for this Vault Store. Archiving to this Vault Store is not possible until Partition created. Facility: %2 Internal Reference: [%3]<br>e.g.<br> Vault Store: CenteraStore No Partition for this Vault Store. Archiving to this Vault Store is not possible until Partition created. Facility: Vault Administration Console Internal Reference: [VAC/NVS1]

An error occurred while attempting to read a value from a performance counter: Object: %1 Counter: %2 Instance: %3 Handle: %4 Error: %5. <br> e.g.<br> An error occurred while attempting to read a value from a performance counter: <br> Object: Memory <br> Counter: % Committed Bytes In Use <br> Instance: Handle: 0x00000000<br> Error: 0xC0000BBC. <br>

Due to an internal error the facility to limit attempts to abandon items that cause repeated failures has been disabled. Reason: %1 Register: %2 Reference: %3 This may result in items that cannot be processed due to repeated errors blocking processing of other items. For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp

Required license not installed. An Enterprise Vault license is required for the following feature but the license is not installed: Feature: %1 Feature Code: %2 %3 See the 'Installing and Configuring' manual for information about licenses. For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp

Required license not active. An Enterprise Vault license is required for the following feature but the installed license is not currently active: Feature: %1 Feature Code: %2 %3 See the 'Installing and Configuring' manual for information about licenses. For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp

Authentication is currently being delayed due to a suspected brute-force attack. Number of failures: %1 Delay period remaining: %2 (mins:secs) During this period users will experience short delays when searching or accessing archived items. For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp

An unsupported version of Microsoft Outlook is installed on this server. All services and tasks will continue to run but you may experience issues during archiving and retrieving of Exchange Server items. Installed Outlook version: %1 Refer to the compatibility charts for supported versions. http://entsupport.symantec.com/docs/276547 For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp

A COM exception occurred while verifying a mailbox's distinguished name. %tSource: %1 %tDescription: %2 This could be the result of undetected problems occurring when CDO.DLL was installed. <br>e.g.<br> A COM exception occurred while verifying a mailbox's distinguished name.<br> Source: Collaboration Data Objects<BR> Description: [Collaboration Data Objects - [MAPI_E_UNCONFIGURED(8004011C)]]

This Enterprise Vault server is running in a building blocks environment and is hosting another Enterprise Vault server. The Shopping Service data file locations for the following Enterprise Vault servers do not match: %2: %3 %4: %5 Please set these locations to be the same and restart the Shopping Service. For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp The Shopping Service cannot perform the requested MAPI dependent operation because the required version of MAPI is missing or incorrectly configured on the Enterprise Vault server: To resolve the problem: 1. Stop all Enterprise Vault services and processes that are using MAPI. 2. Ensure that a version of MAPI supplied with Microsoft Outlook 2003 or later is installed and correctly configured on the Enterprise Vault server. 3. Restart the Enterprise Vault services. If the problem persists, see the "Troubleshooting" section of the Enterprise Vault Administration help file for guidelines on how to proceed. For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp

Failed to inform the %2 Service of successful storage of a Saveset in a Vault Store. Reason: %1 <br>e.g.<br> Failed to inform the Agent (18C4A4BCB9D6B324A96D897BF9B031E5A1110000XXXXXX.XXXX.XXX) Service of successful storage of a Saveset in a Vault Store. Reason: Failed to calculate the service entry table, unrecognized service entryID [0xc0040901]

Error from StorageRestore: Error reading SavesetInformation SavesetID: %1 VaultID: %2 VaultStoreID: %3 <br>e.g.<br> Error from StorageRestore:<br> Error reading SavesetInformation<br> SavesetID: 111000000000000~200301230334000000~0~7E05C9441C664C7C97DB41695CB764F<br> VaultID: 1F701BDD1B125EF4AA74A0BD18CA0D46D1110000acme.com<br> VaultStoreID: 196667B5FEBDAD3119CAB00508B070AE51210000acme.com

Error from StorageRestore: Saveset entry not found in SavesetInformation table SavesetID: %1 VaultID: %2 VaultStoreID: %3 <br>e.g.<br> Error from StorageRestore:<br> Saveset entry not found in SavesetInformation table<Br> SavesetID: 412313000000000~200303230956500000~0~896076EB73A6418FBA64A62196F604B<br> VaultID: 541954128021F7346AC667DAFB5D4A08B1110000vault.acme.com<br> VaultStoreID: 192696B383B8AD4119CE200508B070AE51210000vault.acme.com <br>

Error opening MSMQ Dead Letter Queue - Access is denied for queue %1 Using MSMQ Explorer, edit the permissions of the Computer on which the queue resides. Ensure that the local Administrators group has "Full Control" access. The computer properties to modify will be those of the system on which this error is logged. This can be verified by checking that the ID of the computer (displayed within the General tab of the Computer properties) corresponds with the queue name within this message.

MSMQ negative acknowledgment message(s) have been handled. Queue:%1 Reason: The sender does not have send access rights on the queue. <br>e.g.<br> MSMQ negative acknowledgment message(s) have been handled. Queue:.\private$\Enterprise Vault Archive Agent Admin Queue Reason: The sender does not have send access rights on the queue.

<p>MSMQ negative acknowledgment message(s) have been handled. Queue:%1 Reason: Time to receive has expired, while the message is in the queue </p> <p>e.g.MSMQ negative acknowledgment message(s) have been handled.<br />Queue:.\private$\Enterprise Vault Restore Spool Admin Queue<br />Reason: Time to receive has expired, while the message is in the queue<br /></p>

An unexpected timeout occurred while attempting to access a queued message. This may have occurred because a message was not on a queue as expected or because the system is heavily loaded, thus causing excessive MSMQ delays. If you suspect the problem is caused by MSMQ delays, try increasing the Enterprise Vault "QueueTimeout" registry value, as described in the "Modifying Registry Settings" section in the Troubleshooting section of the Administrator help.

Example<br> Starting update of Vault Index with Storage transactions from 1 to 1419 <p> Vault: Elwood P. Dowd <br> Vault Id: <br> 1443908890DE8CB4EBA827EEAC6A448281110000huyton.zko.acme.com <br> Vault Store: Support FSA <br> Vault Store Id: <br> 1477079532F2AD1469D0738D09C78B4E81210000huyton.zko.acme.com <p> NOTE: Index additions will use the common index elements currently stored in the archived item.

Example<br> Completed update of Vault Index with Storage transactions 13420 to 13450 <p> Vault: Elwood Dowd<br> Vault Id: 1331838A6A86ECD489B8B202FF17B65801110000acme.com<br> Vault Store: ZKO <br> Vault Store Id: 14962C1A68D4E4411838400508B319C691210000acme.com <br> Elapsed Time: 0:0:10 (hours:minutes:seconds)<br> Number of index additions replayed: 30<br> Number of index deletions replayed: 0<br>

Error accessing a Saveset file Reason: %1 Saveset Id: %2 Vault: %3 Vault Id: %4 Reference: %5 <br>e.g.<br> Error accessing a Saveset file Reason: EMC Centera C-Clip contains incorrect Saveset Pool Address: ClipId: Expected: VaultStoreId: VaultId: SavesetId: Received: VaultStoreId: VaultId: SavesetId: [0xc0041a6b] Saveset Id: 441441000000000~200402050749290000~0~3E07C297FC0E4ACB961D6F17D06FB30 Vault: Dowd Elwood Vault Id: 125RE7T5K395ED94FAC9B99FDA89A0AB41110000ACMEVAULT.COM Reference: VSOP

Lost index operations have been detected. The loss has been ignored, and is assumed to be the result of restoring an old database from backup. %1 missing index operations were detected. [Internal reference %3] <br>e.g.<br> Lost index operations have been detected.<br> The loss has been ignored, and is assumed to be the result of restoring an old database from backup.<br> 162 missing index operations were detected.<br> [VaultId = 23T65YH431F653841B1401266A4093F861110000acmevault]<br> [Internal reference CCUAU]

Invalid Saveset file. Error: %1 File: %2 If an HSM is being used check that it is running. <br>e.g.<br> Invalid Saveset file. <br> Error: Saveset decompression failed. Error: Context: [0xc0041aa7] <br> File: E:\Enterprise Vault Stores\IT\2004\02\10\10\341200000000000~200402101018030000~0.DVS <br> If an HSM is being used check that it is running.

Archive operation canceled because Saveset file is missing. [Vault Store: %1] [Vault ID: %2] [Saveset Filename: %3] [Transaction ID: %4] <br>e.g.<br> Archive operation canceled because Saveset file is missing.<br> [Vault Store: First Partition] <br> [Vault ID: 43T6Y5DEEB3CC0408395AABB97A970611110000ACMEVAULT]<br> [Saveset Filename: E:\Enterprise Vault Stores\ZKO\2003\04\18\00\313000000000000~200304180015030000~0.DVS] <br> [Transaction ID: 5921E4E294894B97BA52B4B70DB2266]

Failed to open Queue: %2 Queue FormatName: %3 %1<br>e.g.<br> Failed to open Queue: Enterprise Vault Storage Archive Queue Queue FormatName: PRIVATE=91b6a6e2-5d35-4834-8917-e7d986e0fc29\00000010 Unable to establish a connection with Active Directory. Verify there are sufficient permissions to perform this operation. [0xc00e0013]

Item archive abandoning Message Id: %1 Label: %2 All previous attempts to archive the item have failed or been interrupted. To prevent further failures the item will not be archived. It is probable that the item will remain as 'pending archive' in the user's mailbox. <br>e.g.<br> Item archive abandoning <br> Message Id: {484HFDSY-743B-4410-8D1C-JF6064709ABE}\9543830 <br> Label: Saveset Message for Mailbox /o=ACME/ou=Messaging Administrative Group/cn=Recipients/cn=DowdP, Message titled: MessageTitle <br> All previous attempts to archive the item have failed or been interrupted. To prevent further failures the item will not be archived. It is probable that the item will remain as 'pending archive' in the user's mailbox.

e.g.<br> Storage Expiry Report <p> Vault Store Name: Vault Store 5 <br> Vault Store Id: 108059CA5FF8E724187568F7C863FCA6F1210000acme.kvsvault.com <p> Number of vaults processed: 7 <br> Number of vaults enabled for expiry: 7 <br> Total number of expired items deleted: 0 <br> <p> Items were deleted with the following retention categories: (none) <p> No items were deleted with the following retention categories: <br> PST (119988 months). Miscellaneous (12 months). Public (119988 months). Business (119988 months). Uncategorized (9999 years). Sent Items (119988 months). Deleted Items (3 months). Personal (60 months). <p> Expiry based on archived date <p> Start Time: 15/02/2004 12:00 <br> End Time: 15/02/2004 12:00

Storage Expiry Report (Report Mode) Vault Store Name: %1 Vault Store Id: %2 Number of vaults processed: %3 Number of vaults enabled for expiry: %4 Total number of expired items: %5 Items have expired with the following retention categories: %10 No items have expired with the following retention categories: %11 Expiry based on %12 Start Time: %6 %7 End Time: %8 %9

This is an example. Some details will be different<br> Unable to convert item content <p> Reason: Unspecified error [0x80004005] <br> Supplementary Info: Unknown converter error (0) <p> Item: Saveset Message for Mailbox /O=ACME/OU=ZKO/CN=RECIPIENTS/CN=DOWDP, Message titled: Invoice Subject: Invoices <br> Attachment: invoice1.pdf<br> Type: pdf <br> This item will be archived without a preview being available to the web application and the content will not be indexed. It is not possible to search on the content but the item can be restored as normal**This is an example. Some details may be different**<p> Unable to convert item content to HTML. The content has been converted to text<p> Reason: The requested allocation size was too large [0x80080011] Supplementary Info: <p> Item: SA:FSA-7C02A898D9FCBE26F617C3C20429F7A7--1751237826 Subject: hlog.zip <br> Attachment: <br> Type: zip <br> <p> The content of this item failed conversion to HTML but has been successfully converted to text. The item will be archived normally but the preview available in the web application will be text rather than HTML

%1 (%2) - Process failed PID: %3 Exit Code: %4 The process has failed abnormally and will not be restarted. Either the process has exceeded its restart count or automatic restart is disabled. The process can be restarted by stopping and restarting the Storage Service <br>For example:<br> Storage Archive Server (6) - Process failed <br> PID: 0 <br> Exit Code: Unspecified error [0x80004005] <br> <br> The process has failed abnormally and will not be restarted. Either the process has exceeded its restart count or automatic restart is disabled. The process can be restarted by stopping and restarting the Storage Service

Unable to access Indexing Service on %1 Check that the Indexing Service is running. The process will automatically continue normal operation as soon as the Indexing Service becomes available. <br>e.g.<br>Unable to access Indexing Service on acmevault.acme.com <br> Check that the Indexing Service is running. The process will automatically continue normal operation as soon as the Indexing Service becomes available.

Exchange Server mailbox access error occurred Exchange Server: %1 Exchange Privileged Mailbox: %2 Mailbox DN: %3 Reference: %4 <br>e.g.<br> Exchange Server mailbox access error occurred <br> Exchange Server: ACMEEXCH1 <br> Exchange Privileged Mailbox: EnterpriseVault-ACMEEXCH1 <br> Mailbox DN: /o=ACME/ou=REO /cn=Recipients/cn=Dowdp <br> Reference: OMMS/GMSFP <br> An error occurred while moving items from the PST file to the designated Exchange Server mailbox folder PST file: %1 Exchange Server: %2 Mailbox DN: %3 Mailbox Folder: %4 Reference: %5 <br>e.g.<br> An error occurred while moving items from the PST file to the designated Exchange Server mailbox folder<br> PST file: E:\DOWDP_2002.PST <br> Exchange Server: ACMEEX1 <br> Mailbox DN: /O=ACME/OU=REO/CN=RECIPIENTS/CN=DOWDP<br> Mailbox Folder: Recruitment<br> Reference: MCM/GCT <br>

PST Migration Report Migration status: %1 PST file: %2 Archive Name: %3 Vault Id: %4 Exchange Server\Mailbox: %5 Number of folders processed: %6 Number of items archived: %7 Total size of items archived: %8 KB Number of items unable to be archived: %9 Number of items moved to mailbox: %10 Start Time: %11 End Time: %12

Completed update of Vault Index with Storage transactions 1 to 4810 <BR> Vault: Elwood Dowd<BR> Vault Id: 1C61C1F20FF653841B1401266A4093F861110000vault.acme.com<br> Vault Store: Sales <br> Vault Store Id: 192696B383B8AD4119CE200508B070AE51210000vault.acme.com<br> Elapsed Time: 0:12:18 <br> Number of index additions replayed: 4810<br> Number of index deletions replayed: 0 Update of Vault Index with Storage transactions %5 to %6 suspended whilst processing transaction number %7 Vault: %2 Vault Id: %1 Vault Store: %3 Vault Store Id: %4 Elapsed Time: %8 (hours:minutes:seconds) Number of index additions replayed: %9 Number of index deletions replayed: %10 NOTE: The total number of index additions and deletions replayed may be less than the number of transactions processed. This is because the index update process is optimized so that index additions are not replayed for items that are known to have been fully deleted from the Vault. Number of archived items with an old version of the common index elements: %11 Number of archived items updated with the latest version of the common index elements: %12 NOTE: Index additions were performed using the latest version of the common index elements stored in the archived item. Where necessary the archived item was updated with the latest version of the common index elements.

Unable to update the common index elements of the archived item. Reason: %1 Saveset Id: %2 Vault: %3 Vault Id: %4 Vault Store: %5 Vault Store Id: %6 NOTE: The archived item could not be updated with the latest version of the common index elements. The old version still exists in the item and will be used for the current index update process. <p>Abnormal error occurred Error: %1 Reference: %2 Info: %3 %4 %5 </p> <p>e.g.</p><font size="1"> <p><font size="3">Abnormal error occurred</font></p> <p><font size="3">Error: Cannot create a file when that file already exists. [0x800700b7]</font></p> <p><font size="3">Reference: CMC/ce</font></p> <p><font size="3">Info: CItemFetcher::FetchIndexMetadata</font></p> <p></p> <p></p></font>

Catalogue is not up to date and requires replay Vault: %1 Vault Id: %2 Vault Store: %3 Vault Store Id: %4 Last Transaction: %5 <br>e.g.<br> Catalogue is not up to date and requires replay <Br> Vault: Elwood Dowd <br> Vault Id: 41231EWQ18C42C046AE3A767A5700FC641110000acme.com<Br> Vault Store: Sales <br> Vault Store Id: 4123RQ7453B8AD4119CE200508B070AE51210000acme.com<br> Last Transaction: 0 <br>

Example <p>PST Migration Report </p> <p>Migration status: Completed </p> <p>PST file: d:migrationsdowdp.pst <br />Archive Name: Elwood Dowd <br />Vault Id: 5F65JKE3T29DC114B96E02C9692488B0C1110000acme.com<br />RetentionCategory: Default <br />Exchange ServerMailbox: ACMEEXCH1Elwood Dowd </p> <p>Number of folders processed: 148 <br />Number of items archived: 11165 <br />Total size of items archived: 1372488 KB</p> <p>Number of items unable to be archived: 0 <br />Number of items moved to mailbox: 11428 </p> <p>Elapsed Migration Time: 2:27:20 (hours:minutes:seconds) </p>

Addition of item to catalogue abandoned <br> Catalogue: Journal 2004 <br> Catalogue Id: 643FB28D8F422214786182DA3AA60FF161110000vault.acme.com <br> Saveset Id: 123000000000000~200307543135410000~0~65F4F78AF7B043E0BF9DEC8BF46EE38 <br> Transaction: 10831 <br> All previous attempts to add the item to the catalogue have failed or been interrupted. To prevent further failures the item will not be indexed.

Error from EMC Centera FPLibrary Function call: %1 Status: %2 (%3) Reason: %4 Pool Address: %5 <br>e.g.<br> Error from EMC Centera FPLibrary <br> Function call: HPPPacket.checkControlStatus: FP_SERVER_ERR (-10005) <br> Reason: The server reported an error from the operation (transid='bos-330-03/135/DELETE_CLIP') <br> Pool Address: 141.14.23.11,141.14.23.12 <br> Error opening EMC Centera C-Clip Function call: %1 Status: %2 (%3) Reason: %4 Pool Address: %5 <br>e.g.<br> Error opening EMC Centera C-Clip Function call: NetworkPacket.checkControl(2){HPPReadBlobTransaction.readBytes(HPPImportData&){HPPReadBlobTransaction.run(){ClusterCloud::readBlob(FPBasicGenericStream*,D4121FDA319ACe22ACME,,0,-1,-1,0){FPClip.Open(D4121FDA319ACe22ACME,1){FPClip_Open(-,FVF4VEEA319ACe22M8KSP0ACME,1) Status: FP_CLIP_NOT_FOUND_ERR (-10021) Reason: Clip CDF is not found in the pool (transid='ACMEVAULT01/931/READ_CLIP') Pool Address: 10.169.3.115,10.169.3.116,10.169.3.117,10.169.3.118

EMC Centera C-Clip contains incorrect Saveset Pool Address: %1 ClipId: %2 Expected: VaultStoreId: %3 VaultId: %4 SavesetId: %5 Received: VaultStoreId: %6 VaultId: %7 SavesetId: %8 <br>e.g.<br> EMC Centera C-Clip contains incorrect Saveset <br> Pool Address: 10.28.0.11,10.28.0.12,10.28.0.13,10.48.0.14 <br> ClipId: 543rt642IULOHeAFGKEQCSHP7OC <br> Expected: <br> VaultStoreId: 54RG67UIFF82E2F409375B900DEE0EB0A1210000ACMEVAULT <br> VaultId: 554FG6E37395ED94FAC9B99FDA89A0AB41110000ACMEVAULT<br> SavesetId: 219000000000000~200302040749290000~0~T5R43297FC0E4ACB961D6F17D06FB30 <br> Received: <br> VaultStoreId: 54RG67UIFF82E2F409375B900DEE0EB0A1210000ACMEVAULT <br> VaultId: &#53588;ñ&#7924;&#27075;&#53356;ñ&#27056;&#406; <br> SavesetId: 219000000000000~200302040749290000~0~T5R43297FC0E4ACB961D6F17D06FB30 <br> Could not execute Saveset database transaction Reason: %1 Saveset Id: %2 Transaction: %3 Reference: %4 <br />e.g.<br />Could not execute Saveset database transaction <br />Reason: The Vault is busy [0xc0041800] <br />Saveset Id: 432193400000000~200305232028550000~0~FF31EDE40FF44FBBBDEDA6467BC19E5 <br />Transaction: FF31EDE40FF44FBBBDEDA6467BC19E5 <br />Reference:

Export Archive Report Export status: %1 Job Id: %2 Vault Name: %3 Vault Id: %4 Target Exchange Server\Mailbox: %5 Number of items restored: %6 Number of items unable to be restored: %7 Age range filter: %8 Retention category filter: %9 Elapsed Export Time: %10 (hours:minutes:seconds) <br>e.g.<br> Export Archive Report <BR> Export status: Completed <BR> Job Id: Exp1_20040621132529 <BR> Vault Name: Dowd, Elwood <BR> Vault Id: 14RT65322AD4FB4EA842C4106A2DA8401110000vault.acme.com<br> Target Exchange Server\Mailbox: ACMEEXCH1\Dowd, Elwood <br> Number of items restored: 321<br> Number of items unable to be restored: 2<br> Age range filter: (None) Retention category filter: (None) Elapsed Export Time: 00:04:18 (hours:minutes:seconds) <br>e.g.<br> Export Archive Report <br> Export status: Incomplete <br> Processing aborted due to an unrecoverable error. <br> Job Id: Exp3_20041414431943 <br> Archive Name: Dowd, Elwood<br> Vault Id: 5UTRLEW061FE5424A863424CFE79589991110000acme.com <br> Target PST file location: D:\PST Export\Dowd,Elwood_Export_0001.pst <br> Number of PST files: 1 <br> Number of items restored: 0 <br> Number of items unable to be restored: 1<br> Age range filter: <None> <br> Retention category filter: <None> <br> Elapsed Export Time: 00:00:05 (hours:minutes:seconds)

The Clip cannot be deleted from the EMC Centera Server. Pool Address: %1 Clip-Id: %2 VaultStoreId: %3 VaultId: %4 SavesetId: %5 This can be caused by the Clip Retention period or because the Centera does not allow deletes to be performed. <br />e.g.<br />The Clip cannot be deleted from the EMC Centera Server. <br />Pool Address: 127.13.17.13<br />Clip-Id: 3NMK8VSBGFOERe4LGVFV8V6BA5MG60VRFCN700000000000000000<br />VaultStoreId: 12FTR563123D88748849605BB6359FBB41210000vault.acme.com <br />VaultId: 414123120C102F041A2AA756D994B8D4E1110000vault.acme.com <br />SavesetId: 152000000000000~200401071644180000~0~BBB164935DB140AFBC5244C49865726 <br />This can be caused by the Clip Retention period or because the Centera does not allow deletes to be performed.

Error restoring Saveset during export operation. Job Id: %1 Vault Name: %2 Vault Id: %3 Saveset Id: %4 Reference: %5 <br>e.g.<br> Error restoring Saveset during export operation. Job Id: Exp3_20042227161943 <br> Vault Name: Dowd, Elwood<br> Vault Id: 59RG8R4L61FE5424A863424CFE79589991110000acme.com <br> Saveset Id: 54F040000000000~200203101505520000~0~RE43E359B16F4A71A68289D6D6F4501 <br> Reference: FMP/MAPI/SC <br>

A COM exception has been raised. %1 Internal reference %2 An exception is raised when a process encounters an unexpected fault. Contact your support representative with details of this and any preceding errors. <br>e.g.<br> A COM exception has been raised. <br> The SQL database server detected a deadlock while accessing the Vault Database '' <br>Description: Additional Microsoft supplied information: Source: Number: SQL State: Native Error: HRESULT SQL Command: [0xc0043433] Internal reference VaultStoreDB.cpp (CVaultStoreDB::GetNextSafeUniqueNumber) [lines {1994,2016,2019,2020,2021,2024}] built May 20 16:28:38 2004 <br> An exception is raised when a process encounters an unexpected fault. Contact your support representative with details of this and any preceding errors.

An attempt was made to rebuild the shared indexable item for one or more Savesets that have been Migrated. The Savesets in question will have their shared indexable items replayed as it is not possible to rebuild them. If a rebuild really is required then the Savesets will need to be Unmigrated. Vault: %1 Vault Id: %2 Vault Store: %3 Vault Store Id: %4 Method : %5

Could not store an item in the saveset file. Reason: %1 Saveset File: %2 This archive attempt has been canceled. <p>e.g.<br> Could not store an item in the saveset file. Reason: Saveset compression failed. Error: Context: [0xc0041aa6] Saveset File: E:\Enterprise Vault Stores\Journal\2003\06\21\08\941300000000000~200304212211490000~0.DVS This archive attempt has been canceled.

Failed to recall a Saveset from its Collection. Reason: %1 Saveset: %2 Collection: %3 <p>e.g.<br> Failed to recall a Saveset from its Collection. Reason: Failed to extract CAB file. [0xc0041b0f] Saveset: E:\Enterprise Vault Stores\Eng\2003\03\10\14\122500000000000~200303104400350000~0.ARCHDVS <Br> Collection: E:\Enterprise Vault Stores\Eng\2003\03\10\Collection5116.CAB

The Collector Manager encountered an error. Reason: %1 Method: %2 <br>e.g.<br> The Collector Manager encountered an error. Reason: The Partition Cache is empty. The EnumPartitionsByMigrator method must be successfully called before any other methods of the IMigratorAssister interface. [0xc0041a92] Method: CCollectorManager::CollectorManager

A Partition's Collector run has finished. Partition Root Path: %1 %2 Saveset(s) were Collected into %3 Collection(s). The run completed in %4. <br>e.g.<br> A Partition's Collector run has finished. <br> Partition Root Path: E:\Enterprise Vault Stores\Eng <br> 193 Saveset(s) were Collected into 6 Collection(s). <br> The run completed in 0 hour(s), 4 minute(s), 25 second(s).

The population of Retention Category information for the Vault Store '%1' could not be completed because information is missing from an Index. Saveset records updated: %2 Saveset records remaining to be updated: %3 Index Replay operations have been requested to recover this information. The population of Retention Category information will be resumed the next time the Storage Service is started.

<p>Unable to complete archive request Reason: %1 Vault: %2 Vault Id: %3 Item: %4 Item Id: %5 Reference: %6 Supplementary Info: %7 </p> <p>e.g.</p> <p>Unable to complete archive request<br /><br />Reason: Item cannot be archived. Several attempts to archive the item have failed or been interrupted. To prevent further failures the item should not be presented for archival again. [0xc00419bb]<br />Vault: Misc<br />Vault Id: 1S4A45111C30D4944B86F75044F1999291110000ACME<br />Item: Saveset Message for Mailbox /o=ACME /ou=zko/cn=Recipients/cn=DowdP, Message titled: Six foot white rabbits<br /></p>Unable to complete retrieval request Reason: %1 Vault: %2 Vault Id: %3 Item Id: %4 Reference: %5 Suplementary Info: %6 %7 <br>e.g.<br> Unable to complete retrieval request <br> Reason: The parameter is incorrect. [0x80070057] <br> Vault: Elwood P Dowd Vault Id: 14123R5C6A87D544CB21A585D9047C2F71110000acme Item Id: 14123R5C6A87D544CB21A585D9047C2F71110000acme+300120000000000~200204110843120000~0~CEB18767AC5242B7A0D1D9DA18D5695+0++1321+2+38229.601894444444+86+702 Reference: LMI/rs Suplementary Info: EnterpriseVault.Collector Id: 1321

Cannot find the Enterprise Vault document conversion template file. Reason: %1 Template File: %2 Reverting to the standard template to generate HTML output. <br>e.g.<br> Cannot find the Enterprise Vault document conversion template file. <br> Reason: The system cannot find the file specified. [0x80070002] <br> Template File: C:\Program Files\Enterprise Vault\Converters\EVTemplateMain.htm <br> Reverting to the standard template to generate HTML output. <br>

Unable to update Vault Store Partition record. Partition : %2 Destination : %3 Internal references: Flags : %4 Error : %1 Reference : %5 <br>e.g.<br> Unable to update Vault Store Partition record.<br> Partition : 4JF8RKDSU7453LDPQ348A590E78088278071q10000kvault.acme.com<br> Destination : Internal references:<br> Flags : <br> Error : EMC Centera Collection cannot be disabled until all uncollected Savesets have been collected. If the Storage Service is not running start it and try again later. If the Storage Service is running try again later. [0xc0041af9]<br> Reference : StorageManage.cpp (CStorageManage::EMCCenteraDisableCollection) [lines {...,2967,2968,2977,2978,2982,2986,2987,2988,2998,3013,3017,3019}] built Feb 13 18:34:42 2004

A Partition's Collector run has finished. Partition Root Path: %1 %2 Saveset(s) were Collected into %3 Collection(s). %4 Collection(s) were Migrated to secondary storage. The run completed in %5. <br>e.g.<br> A Partition's Collector run has finished. <br> Partition Root Path: G:\Enterprise Vault Stores\ACME <br> 0 Saveset(s) were Collected into 0 Collection(s). <br> 0 Collection(s) were Migrated to secondary storage. <br> The run completed in 0 hour(s), 6 minute(s), 23 second(s).

e.g.<br> Completed archive conversion and update of Archive Index with Storage transactions 1 to 86830 <br> Archive: Elwood Dowd <br> Archive Id: 412RET5QD13DBD3119CAC00508B070AE51110000vault.acme.com <br> Vault Store: UK <br> Vault Store Id: 48FHE21DSEBDAD3119CAB00508B070AE51210000vault.acme.com<br> Elapsed Time: 1:10:34 (hours:minutes:seconds) <br> Number of index additions replayed: 1 <br> Number of index deletions replayed: 0 <br>

Update of Archive Index with Storage transactions from %5 to %6 suspended whilst processing transaction number %7 during archive conversion Archive: %2 Archive Id: %1 Vault Store: %3 Vault Store Id: %4 Elapsed Time: %8 (hours:minutes:seconds) Number of index additions replayed: %9 Number of index deletions replayed: %10 NOTE: The total number of index additions and deletions replayed may be less than the number of transactions processed. This is because the index update process is optimized so that index additions are not replayed for items that are known to have been fully deleted from the Vault. Number of archived items with an old version of the common index elements: %11 NOTE: Index additions used the common index elements stored in the archived item. Items with old versions of the common index elements may not be indexed with the same level of functionality as items archived using the latest version of the common index elements.

<p>A Collector encountered an error attempting to migrate Collection file %2 to %3. The Collector will abandon migration for the current run. Migration attempts will continue during future runs. Reason: %1 PartitionEntryID: %4 Secondary Storage Location: %5 Method: %6 (%7) </p> <p>e.g.</p> <p>A Collector encountered an error attempting to migrate Collection file E:\Enterprise Vault Stores\EXUSNY1 Ptn11\1999\01\02\Collection59766.CAB to F:\US\VAULT_STORES\EXUSNY1\Partition 11 migration\FB933F8AE14B4C4E9593C9212886AB36\1999\01\02\Collection59766.CAB. The Collector will abandon migration for the current run. Migration attempts will continue during future runs. </p> <p>Reason: The system cannot find the path specified. [0x80070003] </p> <p>PartitionEntryID: 1FB933F8AE14B4C4E9593C9212886AB361q10000ACME-NY </p> <p>Secondary Storage Location: F:\US\VAULT_STORES\EXUSNY1\Partition 11 migration </p> <p><font size="1"><font size="3">Method: CMigrator::SendFile (SF/CD/F:\US\VAULT_STORES\EXUSNY1\Partition 11 migration\FB933F8AE14B4C4E9593C9212886AB36)</font> </font></p>A Collector encountered an error attempting to verify the successful migration of Collection file %2. This unverified Collection file has been deleted from the secondary storage location. The Collector will abandon migration for the current run. Migration attempts will continue during future runs. Reason: %1 PartitionEntryID: %3 Secondary Storage Location: %4 Method: %5 (%6) A Collector encountered an error attempting to verify the successful migration of Collection file %2. This unverified Collection file could not be deleted, and should be removed manually from the secondary storage location. The Collector will abandon migration for the current run. Migration attempts will continue during future runs. Reason: %1 PartitionEntryID: %3 Secondary Storage Location: %4 Method: %5 (%6)

Client request refused due to insufficient privileges user %1 attempted to access the Archive Folder: Archive name: %2 Archive folder path: %3 Vault Id: %4 but does not have permission(s) (%5). A frequent cause of this Warning is a user attempting an operation on a forwarded moved or copied shortcut to a Vault for which they do not have the required permission(s). The Access Control List of the archive/folder identified by %1 has been truncated because its length exceeded the maximum. Number of present Access Control Entries: %2 Number of truncated Access Control Entries: %3<br />e.g.<br />The Access Control List of the archive/folder identified by '140E5472153C07F4E9B91B53658461E1B1110000EV1.acme.com' has been truncated because its length exceeded the maximum.<br /><br />Number of present Access Control Entries: 1820<br />Number of truncated Access Control Entries: 34707<br /><br />For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp<br /><br /><br />

<p>A EMC Centera Collector thread encountered an error and has stopped. Reason: %1 PartitionEntryID: %2 Method: %3 </p> <p>e.g.</p> <p><font face="Courier New"><font size="4"><font face="Times New Roman, Times, serif"><span class="FIXEDFONT">A EMC Centera Collector thread encountered an error and has stopped.</span><br /></font><tt><span class="FIXEDFONT"><font face="Times New Roman, Times, serif">Reason: Not enough storage is available to complete this operation. &nbsp;[0x8007000e]</font>&nbsp;&nbsp;</span></tt></font></font></p>

The MigratorServer cannot start because the required version of MAPI is missing or incorrectly configured on the Enterprise Vault server: To resolve the problem: 1. Stop all Enterprise Vault services and processes that are using MAPI. 2. Ensure that a version of MAPI supplied with Microsoft Outlook 2003 or later is installed and correctly configured on the Enterprise Vault server. 3. Restart the Enterprise Vault services. If the problem persists, see the "Troubleshooting" section of the Enterprise Vault Administration help file for guidelines on how to proceed. For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp

The Vault Store could not be completely deleted because the Partition with EntryId '%1' contains one or more files with a retention period (on the secondary storage device) that has not yet expired. Vault Store Name: %1 Vault Store Id: %2 The operation can be retried at any time. For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp

Unable to create archive because no Indexing Service is defined for computer '%1'. Use the Administration Console to do one of the following: -- Add an Indexing Service to computer '%1' -- Edit the properties of computer '%1' to specify a Default Indexing Service [Archive Name: %2] [Archive Type: %3] [Vault Store: %4] For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp An error occurred while converting the saveset into legacy saveset format. [Saveset ID: %1] [Format: %2] [ClientVersion: %3] MAPI is required to download savesets to legacy Enterprise Vault clients. Check that MAPI is installed on this server. For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp

The Storage Service is waiting for another Storage Service to complete an update of the Fingerprint database '%1', or waiting to get exclusive access to this database. Please ensure no applications, for example SQL Enterprise Manager or SQL Query Analyzer, are accessing this database. %2 For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp

Legacy registry values are in use. Enterprise Vault has a new method of backing up Vault Stores that cannot be used until you remove this registry value. See the Administrator's Guide for information about backing up Vault Stores. The following legacy registry values were found: %1 For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp

Storage Expiry Report Vault Store Name: %1 Vault Store Id: %2 Number of vaults processed: %3 Number of vaults enabled for expiry: %4 Total number of expired items deleted: %5 Total number of items that could not be deleted: %6 Items marked with sent\received date based retention categories have been deleted: %9 Items marked with archived date based retention categories have been deleted: %10 Start Time: %7 End Time: %8 For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp Storage Expiry Report (Report Mode) Vault Store Name: %1 Vault Store Id: %2 Number of vaults processed: %3 Number of vaults enabled for expiry: %4 Total number of expired items: %5 Items marked with sent\received date based retention categories have been deleted: %8 Items marked with archived date based retention categories have been deleted: %9 Start Time: %6 End Time: %7 For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp

An invalid saveset was encountered while doing watch file scan. This archive operation will be attempted to be cancelled. Following further information is available. Partition Name = %1 VaultStoreEntryId = %2 TransactionID = %3 Invalid Reason = %4 For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp

A problem was encountered while part of an item was being archived. A new copy of the part in question will be made in the vault, and the old copy will be 'blacklisted' to prevent further problems occurring. Reason = %1 ParentTransactionId = %2 Attachment Id =%3 Old SIS part Id = %4 New SIS part Id = %5 For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp Following archive could not be deleted as it contains items that are on hold, or their retention category does not allow deletions, or a compliance device retention period prevents them from being deleted. Archive Name = %1 Archive Entry Id = %2 Total items on hold = %3 For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp

An error occurred while attempting to delete a SIS part from a partition. A reference to a SIS Part that has been marked as unreferenced in the Fingerprint Catalogue has been found in one of the vault stores in the vault store group. Please contact your support representative. The following information is available: %1 For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp

Validated the XML trigger file for notifying that the partition is secure.The details are as follows: Partition Name:%1 PartitionEntryID: %2 FilePath: %3 Vendor Name: %4 Vendor AppType: %5 Partition Secured DateTime = %6 Vendor TransactionId = %7 For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp

A Partition's Collector run has finished. Some files were not collected because they have not been backed up. Partition Root Path: %1 Archived items: %2 Files added to collections: %3 Collections: %4 Time taken for the run [H:M:S]: %5:%6:%7 For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp A Partition's Collector/Migrator run has finished. Some files were not collected because they have not been backed up. Partition Root Path: %1 Archived items: %2 Files added to collections: %3 Collections: %4 Files migrated to secondary storage: %5 Time taken for the run [H:M:S]: %6:%7:%8 For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp

You are recommended to create a new SQL index for this vault store database to improve the performance of processing items in the Centera collection area. Table Name:%1 Database: %2 SQLServer: %3 VaultStoreEntryId:%4 See %5 for further information. For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp

Could not contact the Indexing Service Please check the Indexing Service has been started on %2 VaultID: %4 Internal reference: %3 : %1 <br>e.g.<br> Could not contact the Indexing Service <br> Please check the Indexing Service has been started on ACMEVAULT1 <br> VaultID: 1D1D02C3867530NINE54C75F76DE8AAF51110000vault.acme.com <br> Internal reference: SGETACCP CoCreate : Access is denied. [0x80070005]<br>

Client request refused due to insufficient privileges. User %1 does not have permission(s) (%2) to any folder in the Vault with VaultID %3. <p>e.g.<br> Search request refused because the user does not have sufficient permissions to search any folder in the archive. User: ACMECORP\DOWDP <br> Required Permissions: Read<br> Archive: ACME Info <br> Archive Id: 129761B8KIER1BC4A920D385B67BE41C11110000acme.com

e.g.<br> Failed to commit Index updates to disk. <br> Reason: A low level indexing operation has failed<br> Error: Index Id: [0xc0041c43] <br> Index Id: 43TY212E2BA61EE40A0A1841221C018681110000acme.com<br> Index Path: F:\Indexes\43TY212E2BA61EE40A0A1841221C018681110000acme.com <br> Available Disk Space: 0 KB(0 KB) <br> Number of Items added: 46 <br> Number of Items deleted: 0 <br> Number of new words: 35283 <br> Additional Info: Makestable <br> Vers:1401 Mem Load:9771 (Max:1310720) KB

Search request failed. Reason: %1 Index Id: %2 Requestor: %3 Search Query: %4 Search Arguments: %5 <br>e.g.<br> search request failed. <br> Reason: Operation aborted [0x80004004] <br> Index Id: 1412G54341FDC9C4D883B46D36ED8397F1110000vault.acme.com (share) <br> Requestor: ACME\Dowd<br> Search Query: "subj" 40 "file extensions"<br> Search Arguments: Start: 1 Number: 10, Options:0x10000<br> Schema:0x1fdbfa Format:0 PI: CP: <br>

<p>Failed to add item to the index due to failure loading the item's index metadata. Reason: %1 Index Id: %2 Saveset Id: %3 Internal reference: %4 For more information, see Help and Support Center at <a href="http://evevent.veritas.com/rosetta/showevent.asp">http://evevent.veritas.com/rosetta/showevent.asp</a> </p> <p>e.g.&nbsp; Failed to add item to the index due to failure loading the item's index metadata. |Reason: No such interface supported [0x80004002] |Index Id: 213D931093CC94A429D26CADD47E332CA1110000ACME/Volume:7 (MailboxAliasName) |Saveset Id: 128412000000000~200401071308210000~0~138DA8FD60624EB693BA9F1FCC9A22C |Internal reference: XML II load |<br /></p>

<p>Unable to add the item to the index since it is not currently available from the Storage Service. Reason: %1 Attempt: %2 Index: %3 Saveset Id: %4 Sequence Number: %5 For more information, see Help and Support Center at <a href="http://evevent.veritas.com/rosetta/showevent.asp">http://evevent.veritas.com/rosetta/showevent.asp</a> </p><font size="1"> <p><font size="2">Unable to add the item to the index since it is not currently available from the Storage Service.</font></p> <p><font size="2">Reason: Saveset is temporarily unavailable. Try operation again later. [0x80041b03]</font></p> <p><font size="2">Attempt: 7</font></p> <p><font size="2">Index: 1R4WKFIR5S9A7D74E9344C1942C220A2B111000ACME/Volume:1 (JOURNALVAULT)</font></p> <p><font size="2">Saveset Id: 41D5A0000000000~200305102205190000~0~42025941687F4C16A058C95C64CB495</font></p> <p><font size="2">Sequence Number: 607122</font></p></font>

Addition of offline item to index abandoned. Index: %1 Saveset Id: %2 Sequence Number: %3 First requested: %4 All previous attempts to retrieve the item from offline storage have timed out. To prevent further delays the item will not be indexed. For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp Deletion of item from index abandoned. Index: %1 Saveset Id: %2 Item Sequence Number: %3 Delete Sequence Number: %4 All previous attempts to delete the item from the index have failed. To prevent further failures the item will remain in the index. For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp

The index volume has been marked as failed. Index Volume: %1 Index Volume Path: %2 Reference: %3 %4 Due to repeated errors accessing the index volume it has been marked as 'failed' to prevent further errors. The index volume will remain inaccessible until it has been repaired. For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp

Completed index volume update Index Volume: %1 Index Volume Path: %2 Job Id: %3 Job Author: %4 Job Description: %5 Job elapsed time: %6 (hours:minutes:seconds) Processing time: %7 (hours:minutes:seconds) Number of items added: %8 Number of items additions abandoned: %9 Number of items deleted: %10 For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp Aborted index volume update Reason: %1 Aborted by: %2 Index Volume: %3 Index Volume Path: %4 Job Id: %5 Job Author: %6 Job Description: %7 Job elapsed time: %8 (hours:minutes:seconds) Processing time: %9 (hours:minutes:seconds) Number of items added: %10 Number of items additions abandoned: %11 Number of items deleted: %12 For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp

Index volume update in progress Index Volume: %1 Percentage completed: %2 Estimated time of completion: %3 Index Volume Path: %4 Job Id: %5 Job Author: %6 Job Description: %7 Job elapsed time: %8 (hours:minutes:seconds) Processing time: %9 (hours:minutes:seconds) Number of items added: %10 Number of items additions abandoned: %11 Number of items deleted: %12 For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp

The count of failed items in the log file does not match the number recorded in the directory database. The Indexing service will use the count that is in the log file to update the database. Run the IndexCheck tool against this index volume to ensure that the log file is up to date. Index Volume: %1 Index Volume Path: %2 Log File: IndexMissiing.log Number of failed items in the log file: %3 Number of failed items recorded in the database: %4 For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp

The sequence number read from the failed items log does not correspond to the Saveset ID specified in the file. The item will not be repaired. Index Volume: %1 Sequence Number: %2 Expected Saveset ID: %3 Actual Saveset ID: %4 For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp

Update of indexed item abandoned. Index: %1 Saveset Id: %2 Item Sequence Number: %3 %Update Sequence Number: %4 All previous attempts to update the indexed item have failed. No further attempts will be made to update the item. For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp

Failed to commit Index updates to disk. Reason: %1 Index Id: %2 Index Path: %3 Available Disk Space: %4 Number of Items added: %5 Number of Items deleted: %6 Number of Items updated: %7 Number of new words: %8 Additional Info: %9 %10 For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp Index volume update in progress Index Volume: %1 Percentage completed: %2 Estimated time of completion: %3 Index Volume Path: %4 Job Id: %5 Job Author: %6 Job Description: %7 Job elapsed time: %8 (hours:minutes:seconds) Processing time: %9 (hours:minutes:seconds) Number of items added: %10 Number of items additions abandoned: %11 Number of items deleted: %12 Number of items updated: %13 For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp Aborted index volume update Reason: %1 Aborted by: %2 Index Volume: %3 Index Volume Path: %4 Job Id: %5 Job Author: %6 Job Description: %7 Job elapsed time: %8 (hours:minutes:seconds) Processing time: %9 (hours:minutes:seconds) Number of items added: %10 Number of items additions abandoned: %11 Number of items deleted: %12 Number of items updated: %13 For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp Completed index volume update Index Volume: %1 Index Volume Path: %2 Job Id: %3 Job Author: %4 Job Description: %5 Job elapsed time: %6 (hours:minutes:seconds) Processing time: %7 (hours:minutes:seconds) Number of items added: %8 Number of items additions abandoned: %9 Number of items deleted: %10 Number of items updated: %11 For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp

The Directory Service is waiting for another Directory Service to complete an update of the EnterpriseVaultDirectory database, or waiting to get exclusive access to the EnterpriseVaultDirectory database. Please ensure no applications, for example SQL Enterprise Manager or SQL Query Analyzer, are accessing the EnterpriseVaultDirectory database. %1 For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp

The upgrade from Services to Tasks is flagged as incomplete, this may mean that the system may not be providing the same function as prior to upgrade. Check the current configuration and logs, once any issues have been resolved re-run the configuration wizard to complete the upgrade For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp

The Directory Service is running on Windows 2000 and the Windows 2000 Authorization Manager Runtime is not installed. Role Based Administration will not be available until the Windows 2000 Authorization Manager Runtime component is installed. Until then, only users running under the Vault Service Account will be able to administer Enterprise Vault. For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp

The Enterprise Vault Domino Server '%1' could not be contacted. It has been removed from the list of active servers for domain '%s2'. Ensure that this server can be reached over the network and is operating correctly. The server will be added to the active list shortly after connectivity is restored, or when the Domino server is restarted. If necessary you can increase the connection failure limit by setting the EVDomSvrMaxFailures registry value. See the documentation for further details. For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp

Failed to upgrade the roles-based administration database. Microsoft.Interop.Security.AzRoles.dll (version 1.0.0.0) is not registered on this machine. This file is distributed by Microsoft as part of the Windows 2000 Authorization Manager Runtime. For registration instructions, see the RUNTIME_REQUIREMENTS.txt file. For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp

Enterprise Vault has checked the following third-party registry setting and found it does not match the third-party's recommendation. Reference : %1 Key : %2 Value Name : %3 Found 1/0 : %4 Value : %5 To achieve best performance from Enterprise Vault, consider setting this value in accordance with the recommendations. For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp

Vault Store '%1' cannot be deleted because it contains archives that have been moved and are currently registered as being in use. All client applications must have unregistered their interest with these archives before you can delete the Vault Store. For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp

An error was detected while accessing the Vault Database '%2' (Internal reference: %3), error code <%1>. SQL Command: %4 <br>e.g.<br> An error was detected while accessing the Vault Database 'EVSales' (Internal reference: ADODataAccess.cpp (CADODataAccess::AddRecord) [lines {336,337}] built Jul 7 11:45:12 2004), error code <0x80040e14>.<br> SQL Command:<br> INSERT INTO Saveset (ArchivePointIdentity,ArchivedDate,IdChecksumHigh,IdChecksumLow,IdDateTime,IdPartition,IdTransaction,IdUniqueNo,IndexSeqNo,ItemSize,RetentionCategoryIdentity,VaultIdentity ) VALUES ( 51,GETDATE(),1922000,0,CONVERT(datetime,'20030827 19:54:37:000',121),6,'30294952-1791-417D-BDE6-290BB3283590',0,238849,26,4,58)

An error was detected while accessing the Vault Database '%2' (Internal reference: %8): Description: %1 SQL Command: %9 Additional Microsoft supplied information: Source: %3 Number: %4 SQL State: %5 Native Error: %6 HRESULT %7 <br>e.g.<br> An error was detected while accessing the Vault Database 'EVTargetedVS' (Internal reference: BT3): <br> Description: <br> [Microsoft][ODBC SQL Server Driver][DBNETLIB]ConnectionWrite (send()). <br> SQL Command: N/A An error was detected while accessing the Vault Database '%2' (Internal reference: %7): Description: %1 SQL Command: %8 Additional Microsoft supplied information: Source: %3 Number: %4 SQL State: %5 Native Error: %6 <br>e.g.<br> An error was detected while accessing the Vault Database 'EVStore1' (Internal reference: ADODataAccess.cpp (CADODataAccess::ExecuteSQLCommand) [lines {1085,1087,1090,1132,1133,1148}] built Dec 9 17:50:56 2003): Description: [Microsoft][ODBC SQL Server Driver][SQL Server]Could not allocate space for object 'JournalArchive' in database 'EVStore1' because the 'PRIMARY' filegroup is full.

e.g.<br> The SQL database server for EVTargetedVS is not available: Check that the SQL Server is valid and is running <br> Internal reference(BT3) Description: <br> [Microsoft][ODBC SQL Server Driver][DBNETLIB]General network error. Check your network documentation. <br> Additional Microsoft supplied information: <br> Source: Microsoft OLE DB Provider for ODBC Drivers Number: 0x8004d008 SQL State: 08S01 Native Error: 00000011 HRESULT 0x8004d008 %10: ADO Pool: Pool Statistics: Number of pool connections: %1 Number of requests: %2 Number of connection used: %3 Number of requests delayed: %4 Maximum retry: %5 Percentage of requests delayed: %6 Total waiting time: %7 (millisecond) Average waiting time for requests delayed: %8 (millisecond) Average waiting time for all requests: %9 (millisecond)

e.g.<br> An error was detected while accessing the Vault Database 'EnterpriseVaultDirectory'. If multiple instances of SQL Server exist ensure the correct instance was specified (Internal reference: CC1): <br> Description: [Microsoft][ODBC SQL Server Driver][Shared Memory]SQL Server does not exist or access denied.<br> SQL Command: N/A <br> Additional Microsoft supplied information:<br> Source: Microsoft OLE DB Provider for ODBC Drivers<br> Number: 0x80004005 <br> SQL State: 08001 <br> Native Error: 00000017 <br> HRESULT 0xc0043433<br>

The following folders have exactly the same Vault properties: (a) %1 (b) %2 Possible causes (and their outcome) of this problem: 1) Folder (a) is a copy of (b). A new Vault will be created for the folder (a) 2) Folder (a) has been renamed and a new folder (b) created with the original pathname. The original Vault for folder (a) will no longer have its permissions automatically synchronized and items in this folder may not be available to all its subscribers. A new Vault will be created for both folders (a) and (b).

The SPS service cannot start because the required version of MAPI is missing or incorrectly configured on the Enterprise Vault server: To resolve the problem: 1. Stop all Enterprise Vault services and processes that are using MAPI. 2. Ensure that a version of MAPI supplied with Microsoft Outlook 2003 or later is installed and correctly configured on the Enterprise Vault server. 3. Restart the Enterprise Vault services. If the problem persists, see the "Troubleshooting" section of the Enterprise Vault Administration help file for guidelines on how to proceed. For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp

Downloaded file is not the expected size: Url: %1, Content length: %2 bytes File: %3, Size: %4 bytes <br>e.g.<br> http://uk01.lfc.local/EnterpriseVault/download.asp?VaultID=120B6E2C99D16664C8DD661D2A36CA6FB1110000uk01.lfc.local&SavesetId=199000000000000~200305300846020000~0~A95EFEA3F9274A10BFE41B9FBC56BB3&Request=NativeItem&EVHeaders=1, Content length: 106406912 bytes File: \\?\E:\LARGE_FILES\CENTERA TEST\EVPS_7100_3152_200552011371.tmp, Size: 104857600 bytes

The following files had at least one invalid date: %1 The date on the file has not been changed. In the FSA Reporting database, Enterprise Vault has used the most appropriate of the following dates for the file: %t01-Jan-1753 %t31-Dec-9999 For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp

The FSAReportingService process will be shut down because there is insufficient disk space on drive %1. Delete any unwanted files from the drive and then restart the process as follows. On file servers on which the FSA Agent is installed, restart the Enterprise Vault File Collector Service. Otherwise, restart the Enterprise Vault Admin Service on the Enterprise Vault server. For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp

FSA Reporting cannot work on this file server. The version of Enterprise Vault that is on the Enterprise Vault server is older than the version of the FSA Agent that is on this file server. Upgrade the Enterprise Vault server to a compatible version. For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp

The folder attributes for the folder: {0} could not be accessed as access was denied.\n\nThis folder and its subfolders will be excluded from archiving\n\nSee the Administrator Help for more information. <BR>E.G.<BR> The folder attributes for the folder: \\users\e$\vol5\DOWDEP\Car\ could not be accessed as access was denied. This folder and its subfolders will be excluded from archiving See the Administrator Help for more information.

The SQL database transaction log for Vault Store '{0}' has used {1}% of its allocated space.\n\nThe information in this database is at risk until the database has been backed up.\n\nReview your SQL database backup procedures and make any changes needed to ensure that backups happen in a timely fashion.\n\nEnsure that your database is adequately sized for the transactions taking place during an archive run.\n\nAlso check that there is enough disk space available to accommodate any growth in your database and database transaction log files.

The Directory database transaction log has used {0}% of its allocated space.\n\nThe information in this database is at risk until the database has been backed up.\n\nReview your SQL database backup procedures and make any changes needed to ensure that backups happen in a timely fashion.\n\nEnsure that your database is adequately sized for the transactions taking place during an archive run.\n\nAlso check that there is enough disk space available to accommodate any growth in your database and database transaction log files.

There are&nbsp;513935 savesets that are waiting to be indexed and/or waiting to be backed up or replicated in Vault Store 'EXUSNY2'. Check that your Indexing and Storage services are running. Review your procedures and make any changes needed to ensure that backups happen in a timely fashion. If you are using an EMC Centera, check the size of the Centera replication queue.

The File Server Archive Manager cannot start because the required version of MAPI is missing or incorrectly configured on the Enterprise Vault server:\n\nTo resolve the problem:\n\n1. Stop all Enterprise Vault services and processes that are using MAPI.\n2. Ensure that a version of MAPI supplied with Microsoft Outlook 2003 or later is installed and correctly configured on the Enterprise Vault server.\n3. Restart the Enterprise Vault services.If the problem persists, see the "Troubleshooting" section of the Enterprise Vault Administration help file for guidelines on how to proceed.

<p>The Exchange mailbox provisioning task failed during processing of a mailbox. The task is continuing. Task: {0} User: {1} Mailbox: {2} Provisioning group: {3} Group member: {4} Error: {5} Trace: {6} </p> <p>e.g.</p> <p><font face="Courier New" size="4">The Exchange mailbox provisioning task failed during processing of a mailbox. The process will continue.<br /><br />Error: SqlDateTime overflow. Must be between 1/1/1753 12:00:00 AM and 12/31/9999 11:59:59 PM.</font> </p>

The Exchange mailbox provisioning task found some mailboxes that are not eligible for processing by this task.\n\nThis task will process mailboxes on every Exchange Server in this domain that has been added to the Administration Console.\n\nIf you want this task to process such mailboxes, add the host Exchange Server to the Administration Console.\n\nSee the provisioning task report for further details.\n\nTask: {0}\n\nDomain: {1}

The Exchange mailbox provisioning task failed to read required information from Active Directory. The task has stopped. Ensure that the Active Directory server is operational and the account the task is using to log on has read access to the required objects. Then run the task again.\n\nTask: {0}\n\nDomain: {1}\n\nProvisioning group: {2}\n\nGroup member: {3}\n\nAD server: {4}\n\nError: {5}

The Exchange mailbox provisioning task failed to read required information from an Active Directory object. The task has stopped. Ensure that the account the task is using to log on has read access to the object and that the object has the required properties. Then run the task again.\n\nTask: {0}\n\nDomain: {1}\n\nProvisioning group: {2}\n\nGroup member: {3}\n\nAD server: {4}\n\nError: {5}<p>e.g.</p><font size="1"> <p><font size="3">The Exchange mailbox provisioning task found enabled mailboxes that are not part of a provisioning group. These mailboxes cannot be archived. If you do not want these mailboxes to be archived, use the Administration Console to disable them. See the provisioning task report for further details (full reports only).</font></p> <p><font size="3">Task: Exchange Provisioning Task for enterprise.veritas.com</font></p> <p><font size="3">Domain: enterprise.acme.com</font></p></font>

The Exchange mailbox provisioning task found some mailboxes that are not eligible for processing by this task.\n\nThis task will process mailboxes on every Exchange Server in this domain that has been added to the Administration Console.\n\nIf you want this task to process such mailboxes, add the host Exchange Server to the Administration Console.\n\nTo include the names of these mailboxes in the provisioning task report, set the 'DisableExternalMbxLogging' registry value to 0.\n\nTask: {0}\n\nDomain: {1}

{0}The Exchange provisioning task found a mailbox with duplicate entries in the Enterprise Vault database, and automatically removed the duplicates. The default Vault ID of the most recent entry has been selected for this mailbox.\n\nThe mailbox is not currently enabled for client-side PST migration. You may wish to review this setting to confirm that it is correct.\n\nTask: {1}\n\nDomain: {2}\n\nMailbox: {3}\n\nEntryID: {4}\n\nDefault Vault ID: {5}\n\nDuplicate entries removed: {6}\n\nAssociated default Vault IDs: {7}{0}The Exchange provisioning task found a mailbox with duplicate entries in the Enterprise Vault database, and automatically removed the duplicates. The default Vault ID of the most recent entry has been selected for this mailbox.\n\nSome PST files were associated with one or more of the deleted entries. You may need to amend the database to associate the PST files with the new entry for this mailbox - contact support if required.\n\nThe mailbox is not currently enabled for client-side PST migration. You may wish to review this setting to confirm whether it is correct.\n\nTask: {1}\n\nDomain: {2}\n\nMailbox: {3}\n\nEntryID: {4}\n\nDefault Vault ID: {5}\n\nDuplicate entries removed: {6}\n\nAssociated default Vault IDs: {7}

<p>There was an error processing an item in a mailbox. The task will process the item again on the next archiving run. Task: {0} Mailbox: {1} NoteID: {2} Subject: {3} Error: {4} Trace: {5} </p> <p>e.g.</p> <p>There was an error processing an item in a mailbox. The task will process the <br />item again on the next archiving run.</p> <p>Task: Domino Mailbox Archiving Task</p> <p>Mailbox: 'SERVER/ACME1!!mail\dowd'-CN=Elwood <a href="mailto:Dowd/O=ACME1@MYDOMAIN">Dowd/O=ACME1@MYDOMAIN</a></p> <p>NoteID: 110e</p> <p>Subject: &lt;unavailable&gt;</p> <p>Error: Error(3637): Unable to open note 110e - Cannot convert MIME message to <br />Notes Rich Text message.</p> <p>Trace:&nbsp;&nbsp;&nbsp; at DomNote.Open()<br />&nbsp;&nbsp; at LotusDominoMailboxArchivingTask.BaseQItem.OpenNote()<br />&nbsp;&nbsp; at LotusDominoMailboxArchivingTask.ArchiveQItem.Process()</p> <p></p>

Enterprise Vault found encrypted notes in the Domino journal that do not appear to be encrypted by a user and that could not be decrypted by the journaling ID.\n\nCheck that you are using the correct journaling ID for this journal database. If you would like to archive these notes in their encrypted form, set the DominoJournalArchiveNonDecryptableNotes registry value to 1. See the documentation for further details.\n\nTask: {0}\n\nJournal database: {1}\n\nJournaling ID: {2}\n\nNote IDs: {3}

The Content Cache Request Manager failed to process a client request because of one or more of the following: \n * Cache Location (Set in Server Properties)\n * 'Maximum Cache Size' (Set in Server Properties)\n * 'Maximum Concurrent Vault Cache Updates' is set to 0 (Set in Server Properties)\n * The Directory Service is unavailable\n * The Storage Service is unavailable\n\n The Content Cache Request Manager will work in 'offline' mode until the problem is fixed.

The SQL database transaction log for Vault Store Group '{0}' has used {1}% of its allocated space.\n\nThe information in this database is at risk until the database has been backed up.\n\nReview your SQL database backup procedures and make any changes needed to ensure that backups happen in a timely fashion.\n\nEnsure that your database is adequately sized for the transactions taking place during an archive run.\n\nAlso check that there is enough disk space available to accommodate any growth in your database and database transaction log files.

Move archive has detected an error occurred when the items in the destination archive were being verified following a backup.\nThe maximum retry threshold has been reached and Archive moves will no longer attempt to re-copy any further items.\n\nPlease check the event log on the Enterprise Vault server where the destination archive is located.\nPlease check the Move archive log file on the Enterprise Vault server where the source archive is located.\n\nThe move archive documentation contains more information about setting the threshold for the maximum number of retries.\n\nSource archive: {0}\n\nDestination archive: {1}\n\nDestination Vault Store: {2}Move archive detected a storage error while the items in the destination archive were being verified following a backup. Check the event log on the Enterprise Vault server that hosts the destination archive.\n\nUnless the maximum number of retries has been exceeded, move archive will re-copy the items, wait for the items to be backed up, then repeat the verification.\n\nSource archive: {0}\n\nDestination archive: {1}.\n\nDestination Vault Store: {2}

Move archive cannot move this item because it already exists in another archive in the destination vault store.\n\nItem: {0}\n\nSource archive: {1}\n\nDestination vault store: {2}\n\nSelected destination archive: {3}\n\nArchive that contains the duplicate: {4}\n\nEnterprise Vault will try again later unless the retry count has been reached.\n\nFor more information about the handling of duplicate items, see the Administrator's Guide.

IArchivingControl2::MAPISaveChanges() is not supported when using get_CDOMessage or get_CDOMessageEnvelope. If the filter changes message properties or attachments you must use get_MAPIMessage and/or get_MAPIMessageEnvelope. For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp The CDO components are not installed on the Enterprise Vault server. A filter has requested access to a message using CDO. This type of access is supported only when Outlook 2003 is installed on the Enterprise Vault server. Resolution: Install Outlook 2003, including the Collaboration Data Objects, on the Enterprise Vault server. For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp

Mailbox Report Date: %1 System Name: %2 Mailbox Name: %3 Associated Account: %13 Mailbox State: %18 Mailbox Quota Limit: %14 KB Mailbox Quota Used: %15 KB Percentage of Mailbox Quota free: %16 Number of archivable items in mailbox: %4 Total size of archivable items in mailbox: %5 KB Number of archivable folders in mailbox: %6 Number of items ready to archive: %7 Total size of items ready to archive: %8 KB Number of items that would be archived: %9 Total size of items that would be archived: %10 KB Number of expired shortcuts that would be deleted: %17 Start Time: %11 End Time: %12

An error occurred whilst post processing a message and it could not be changed back from the Archive Pending state. Error that caused the message to be changed back: %1 Error when trying to change the message back: %2 <br>e.g.<br> An error occurred whilst post processing a message and it could not be changed back from the Archive Pending state. Error that caused the message to be changed back: 8004011d Error when trying to change the message back: c0040899

This is an example. Details may be quite different.<p> A queued operation exceeded the retry count and has been discarded<p> Enterprise Vault Journaling Service for ACMEEXCH1<p> m_pIBackgroundArchivingAgent->ProcessItem(Priority = "true",<br> ExchangeSystem = "ACMEEXCH1",<br> m_pILocation,<br> (ULONG)EntryIdSize = 70,<br> EntryId,<br> ArchiveId = "1828E94DA5D483744B6E82329221A153A1110000huyton.zko.acme.com",<br> RetentionCategory= "181667B5FEBDAD3119CAB00508B070AE51b10000huyton.zko.acme.com",<br> UserMailboxDn = "/o=ACME/ou=EENGINEERING/cn=Servers/cn=stewart-journal",<br> MessageTitle = "Tax Return",<br> nRetryCount = 3,<br> NULL,<br> CallerSID,<br> isAReArchive = 0, ArchiveTransId = "5E24F8CD11B14E60A60A8443859FF7F", IndexedPropertiesSet = "");<p> HRESULT: 0x80070057 %2

Error opening MSMQ Dead Letter Queue - Access is denied for queue %1 Using MSMQ Explorer, edit the permissions of the Computer on which the queue resides. Ensure that the local Administrators group has "Full Control" access. The computer properties to modify will be those of the system on which this error is logged. This can be verified by checking that the ID of the computer (displayed within the General tab of the Computer properties) corresponds with the queue name within this message

An unexpected timeout occurred while attempting to access a queued message. This may have occurred because a message was not on a queue as expected or because the system is heavily loaded, thus causing excessive MSMQ delays. If you suspect the problem is caused by MSMQ delays, try increasing the Enterprise Vault "QueueTimeout" registry value, as described in the "Modifying Registry Settings" section in the Troubleshooting section of the Administrator help.

The Storage Service is still at its upper MSMQ threshold. The Archiving/Journaling Service will pause for %1 minutes to let it recover. Mailbox %2 will be processed again when the service resumes processing. <br>e.g.<br> The Storage Service is still at its upper MSMQ threshold. The Archiving/Journaling Service will pause for 15 minutes to let it recover. Mailbox /O=ACME /OU=REO/CN=RECIPIENTS/CN=DOWDP will be processed again when the service resumes processing.

Public Folder Report Date: %1 System Name: %2 Public Folder start point: %3 Number of archivable items (from start point): %4 Total size of archivable items (from start point): %5 KB Number of folders processed: %6 Number of items ready to archive: %7 Total size of items ready to archive: %8 KB Number of items that would be archived: %9 Total size of items that would be archived: %10 KB Number of expired shortcuts that would be deleted: %13 Start Time: %11 End Time: %12

The IRestorationAgent->RestoreItem() function failed whilst processing the item with TransactionID: %1, SavesetID: %2 Number of retries: %3 The retrieval request has failed because the associated Saveset could not be found on the spool queue. The retrieval request will now be discarded It is possible that the Saveset has been removed from the spool queue because it has not been received in time. <br>e.g.<br> The IRestorationAgent->RestoreItem() function failed whilst processing the item with TransactionID: 5123104F6ADC42AAB41C617FFE1A3FE, SavesetID: 101310000000000~200304180803140000~0~5303A7CBB67642ACAB2B555CEB49ED7 <br>Number of retries: 30 <br> The retrieval request has failed because the associated Saveset could not be found on the spool queue. The retrieval request will now be discarded <br> It is possible that the Saveset has been removed from the spool queue because it has not been received in time.

Could not get a MAPI session when validating the public folder root path %1 The following error was returned: %2. Please check that the Exchange Server %3 is running and that the Vault Site account has the correct privileges. <br>e.g.<br> Could not get a MAPI session when validating the public folder root path \ACME\IT The following error was returned: 80040111. Please check that the Exchange Server ACMEEXCH1 is running and that the Vault Site account has the correct privileges.

The mailbox %1, has exceeded its "Prohibit Send & Receive" limit and cannot be processed. Maximum allowed: %2 KB Current level : %3 KB If you wish Enterprise Vault to archive items from this mailbox then this quota must be removed. <p>e.g.<br> The mailbox /O=ACME/OU=REO/CN=RECIPIENTS/CN=DOWDP, has exceeded its "Prohibit Send & Receive" limit and cannot be processed.<br> Maximum allowed: 4000 KB<br> Current level : 7000 KB<br> If you wish Enterprise Vault to archive items from this mailbox then this quota must be removed.

PF_CheckVaultAvailability has been unable to determine the current Vaults status. Details: VaultId: %2 Mailbox: %3 Folder: %4 Reason: %1 <br>e.g.<br> PF_CheckVaultAvailability has been unable to determine the current Vaults status. Details: VaultId: 1D5A96DEEBB68D61183B000508B319C691110000vault.acme.com Mailbox: /o=ACME/ou=ENGINEERING/cn=Recipients/cn=Journal Folder: Top of Information Store Reason: Not enough storage is available to complete this operation. [0x8007000e]

<font face="Courier New"><span class="FIXEDFONT">The following message could not be archived by the Journaling Service as it may be corrupt. </span><br /><tt><span class="FIXEDFONT">Title: %1</span></tt></font><br /><tt><span class="FIXEDFONT">Mailbox: %2 </span></tt><br /><br /><tt><span class="FIXEDFONT">An error occurred whilst moving the message to the 'Enterprise Vault Journaling Service\Failed to copy' folder. The message has been marked as "Do Not Archive", and no further attempts will be made to archive this message.</span></tt><br />

The following folders have exactly the same Vault properties: (a) %1 (b) %2 Possible causes (and their outcome) of this problem: 1) Public folder (a) is a copy of (b). A new Vault will be created for the public folder (a) 2) Public folder (a) has been renamed and a new folder (b) created with the original pathname. The original Vault for folder (a) will no longer have its permissions automatically synchronized and items in this folder may not be available to all its subscribers. A new Vault will be created for both public folders (a) and (b).

A MSMQ negative acknowledgment message has been processed for a message of type 'PROCESS MAILBOX EX'. The Exchange User Mailbox: %1 on the Exchange system: %2 will not be automatically archived until the next archive scheduled period <br>e.g.<br> A MSMQ negative acknowledgment message has been processed for a message of type 'PROCESS MAILBOX EX'. The Exchange User Mailbox: /O=ACME/OU=ZKO/CN=RECIPIENTS/CN=ELWOODP on the Exchange system: /o=Acme/ou=ZKO/cn=Configuration/cn=Servers/cn=EXCHANGE/cn=Microsoft Private MDB will not be automatically archived until the next archive scheduled period

The following message could not be archived by the Archive/Public Folder Service as it may be corrupt. Title: %1 Mailbox: %2 If you see this warning repeatedly contact KVS Support. <p>e.g.<br> The following message could not be archived by the Archive/Public Folder Service as it may be corrupt. <p> Title: Fwd: Mark in ZKO<br> Mailbox: /o=acme/ou=ZKOEUROPEENGINEERING/cn=SUP REO/cn=Dowdp If you see this warning repeatedly contact KVS Support.

The number of items pending indexing for the archive has grown above the threshold limit. This service will pause for 5 minutes to allow the backlog to clear. Mailbox: %1 Archive Name: %2 Archive Id: %3 Service: %4 <p>e.g.<br> The number of items pending indexing for the archive has grown above the threshold limit. This service will pause for 5 minutes to allow the backlog to clear. <p> Mailbox: /o=ACME/ou=REO/cn=Recipients/cn=journal <br> Archive Name: Journal <br> Archive Id: 43ITR8E453A1ED611BE120002A58CDB441110000ACME.COM<br> Service: Enterprise Vault Journaling Service for ACMEEXCH1<br>

An error occurred processing the external filter '%2'. No more filters will be processed. Error: %1 Mailbox: %3 Message Folder: %4 Message Title: %5 <p>e.g.<br> An error occurred processing the external filter 'KVS.Accelerator.PlugIn.Filter'. No more filters will be processed. <br> Error: No such interface supported [0x80004002] <br> Mailbox: /O=ACME/OU=ZKO/cn=Recipients/cn=Journal-ACME <br> Message Folder: ?Inbox <br> Message Title: Tournament <br>

Failed to enable a user mailbox. The system reported 'An invalid directory pathname was passed', this may be because a new user or mailbox has not yet been fully initialized or an existing user or mailbox may have been recently deleted. Task: %2 Mailbox: %1 See the help topic called 'Problems enabling mailboxes' for details of the permissions you need to enable mailboxes. For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp

The task controller cannot start the following MAPI-dependent tasks because the required version of MAPI is missing or incorrectly configured on the Enterprise Vault server: %1 To resolve the problem: 1. Stop all Enterprise Vault services and processes that are using MAPI. 2. Ensure that a version of MAPI supplied with Microsoft Outlook 2003 or later is installed and correctly configured on the Enterprise Vault server. 3. Restart the Enterprise Vault services. If the problem persists, see the "Troubleshooting" section of the Enterprise Vault Administration help file for guidelines on how to proceed. For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp

<p>e.g.</p><font size="1"> <p><font size="2">Summary for shortcut deletion.</font></p> <p><font size="2">Mailbox: '/o=Enterprise/ou=MDH/cn=ADC/cn=Users/cn=Elwood Dowd':</font></p> <p><font size="2">Total number of shortcuts found: 5132</font></p> <p><font size="2">Number of expired shortcuts deleted: 157</font></p> <p><font size="2">Number of orphaned shortcuts deleted: 0</font></p> <p><font size="2">Number of old shortcuts deleted: 303</font></p> <p><font size="2">Total number of shortcuts remaining: 4672</font></p></font>

Mailbox Report Date: %1 System Name: %2 Mailbox Name: %3 Associated Account: %13 Policy: %28 Mailbox State: %20 Mailbox Quota Limit: %14 KB Mailbox Quota Used: %15 KB Percentage of Mailbox Quota free: %16 Number of archivable items in mailbox: %4 Total size of archivable items in mailbox: %5 KB Number of archivable folders in mailbox: %6 Number of items ready to archive: %7 Total size of items ready to archive: %8 KB Number of items that would be archived: %9 Total size of items that would be archived: %10 KB Number of expired shortcuts that would be deleted: %17 Number of orphaned shortcuts that would be deleted: %18 Number of old shortcuts that would be deleted: %19 Start Time: %11 End Time: %12 For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp Public Folder Report Date: %1 System Name: %2 Public Folder start point: %3 Policy: %23 Number of archivable items (from start point): %4 Total size of archivable items (from start point): %5 KB Number of folders processed: %6 Number of items ready to archive: %7 Total size of items ready to archive: %8 KB Number of items that would be archived: %9 Total size of items that would be archived: %10 KB Number of expired shortcuts that would be deleted: %13 Number of orphaned shortcuts that would be deleted: %14 Number of old shortcuts that would be deleted: %15 Start Time: %11 End Time: %12 For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp Mailbox Report Date: %5 System Name: %1 Mailbox Name: %2 Associated Account: %3 Policy: %12 Mailbox State: %4 Number of shortcuts where no action was taken: %11 Number of expired shortcuts that would be deleted: %8 Number of orphaned shortcuts that would be deleted: %9 Number of old shortcuts that would be deleted: %10 Start Time: %6 End Time: %7 For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp Public Folder Report Date: %3 System Name: %1 Public Folder start point: %2 Policy: %10 Number of shortcuts where no action was taken: %9 Number of expired shortcuts that would be deleted: %6 Number of orphaned shortcuts that would be deleted: %7 Number of old shortcuts that would be deleted: %8 Start Time: %4 End Time: %5 For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp

A new entry in the Enterprise Vault database has been created for a new mailbox that had an existing entry in the database. The existing entry has been renamed. New mailbox: %1 Existing entry renamed to: %2 Reset the SyncInMigrationMode registry value after all affected mailboxes have been processed. See the documentation for further details. For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp

This mailbox cannot be processed until the Exchange provisioning task has processed the corresponding user's details. Ensure that a provisioning group includes this user and run the provisioning task. To disable these warnings, set the 'HideMissingPolicyInfoErrors' registry value to 1. See the documentation for further details. Mailbox: %1 Message store: %2 For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp

<p>e.g.</p> <p>There were too few archivable items available to take mailbox '/O=ACMEOU=ZKO/cn=Recipients/cn=Dowdp' below the quota-free level of 10%.</p> <div>&nbsp;&nbsp;Quota limit: 200000 KB &nbsp;&nbsp;Quota used: 339062 KB (169% of Quota limit) &nbsp;&nbsp;Required to archive: 158000 KB &nbsp;&nbsp;Actual amount archived: 167 KB</div> <div>&nbsp;You may need to review your mailbox archiving policies to allow more items to be archived if you regularly see this warning for mailboxes.</div>

Public folder redirection has been detected. This configuration can adversely affect performance and reliability. This redirection could be either of the following: -The mailbox that is being used to connect to Exchange Server is being redirected to another Exchange Server. -The Public Folder store is not homed locally on the target Exchange Server Exchange Server: %1 Public Folder Task: %2 Redirected to Server: %3 For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp

The following message could not be archived by the Journaling Service as it seems to have an invalid envelope body. Title: %1 Mailbox: %2 An error occurred whilst moving the message to the 'Enterprise Vault Journaling Service\Failed to Copy' folder. The message has been marked as "Do Not Archive", and no further attempts will be made to archive this message. For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp

The following envelope message could not be archived as the attached message does not appear valid. Title: %1 Mailbox: %2 An error occurred whilst moving the message to the 'Enterprise Vault Journaling Service\Failed to Copy' folder. The message has been marked as "Do Not Archive", and no further attempts will be made to archive this message. For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp

There were too few archivable items available to take mailbox '%1' below the quota-free level of %2%. Quota limit: %3KB Quota used: %4KB (%5% of quota limit) Previously archived (pending): %8KB Required to archive: %6KB (adjusted %9KB) Amount archived (this run): %7KB You may need to review your mailbox archiving policies to allow more items to be archived if you regularly see this warning for mailboxes. For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp

The following message could not be archived by the Journal Task as it may be corrupt. Title: %1 Task: %2 Mailbox: %3 Number of corrupt Journal mailbox messages currently identified: %4 The message cannot be moved to the 'Enterprise Vault Journaling Service\Invalid Journal Report' folder and also cannot be marked as "Do Not Archive". For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp

Could not update shortcut. The archiving task cannot process one or more shortcuts to items that have been migrated from Domino. The RestoreShortcutBody registry value is set. This registry value makes the archiving task rebuild Enterprise Vault shortcuts for Exchange Server messages and shortcuts to items that have been migrated from Domino. The archiving task cannot initialize the Lotus Notes runtime in order to process items that have been migrated from Domino. Check that Lotus Notes is correctly installed on the server that is running the archiving task. Exchange Server shortcuts can be processed correctly. For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp

Example:<p> Enterprise Vault Indexing Service Service startup is delayed pending service synchronization <p> The service depends on one or more Enterprise Vault services and is waiting until they are all fully operational. Service startup will fail if service synchronization takes longer than 30 minutes. Note that the Services Control Panel dialog box will show this service as running even though it is not fully operational <p> The most likely cause of the delay is that the Directory service is not running

%1 Startup is being canceled due to failure of service synchronization The service depends on one or more Enterprise Vault services that have not become fully operational during the service synchronization period The most likely cause of the failure is that the Directory service is not running <br>e.g.<br> Enterprise Vault Public Folder Service - ACME IT is being canceled due to failure of service synchronization The service depends on one or more Enterprise Vault services that have not become fully operational during the service synchronization period. <br> The most likely cause of the failure is that the Directory service is not running

The %1 service failed to respond to the STOP request in a timely manner. This may be due to the service getting insufficient CPU time; check subsequent event log entries for a "successfully stopped" message. If the service is still running, manually stop the service and check the event log for any errors logged by the service. <br>e.g.<br> The Enterprise Vault Archiving Service for ACMEEXCH1 service failed to respond to the STOP request in a timely manner. This may be due to the service getting insufficient CPU time; check subsequent event log entries for a "successfully stopped" message. If the service is still running, manually stop the service and check the event log for any errors logged by the service.

An unhandled access violation has occurred. <p> Command Line: "C:\Program Files\Enterprise Vault\{server executable}" <br> Process Id: %2<br> Thread Id: %3<br> Exception Id: %4<br> Instruction Address: %5<br> Memory Access Type: %6<br> Memory Address: %7<br> Stack Trace: %8 Stack Trace(basic): %9 Registers: %10 <p> The process has attempted to access a protected memory address. Contact your support representative with details of this and any preceding errors. An exception has been raised. Internal reference %1 %2 An exception is raised when a process encounters an unexpected fault. Contact your support representative with details of this and any preceding errors. <BR>e.g.<br> An exception has been raised. <br> Internal reference Filter.cpp (CFilter::FinalConstruct) [lines {27,31}] built Jun 17 15:39:02 2004 <br> An exception is raised when a process encounters an unexpected fault. Contact your support representative with details of this and any preceding errors.

A C Runtime debug report has been raised. Report Type: %1 Report: %2 Process Id: %3 Command Line: %4 NOTE: The process may be hung awaiting user response to a Windows message box. If the process is not running under the same user account as the current desktop then the message box may not be visible. In this situation it may be possible to investigate the error that generated the debug report by attaching a debugger to the process.

The Shopping Service cannot perform the requested MAPI dependent operation because the required version of MAPI is missing or incorrectly configured on the Enterprise Vault server: To resolve the problem: 1. Stop all Enterprise Vault services and processes that are using MAPI. 2. Ensure that a version of MAPI supplied with Microsoft Outlook 2003 or later is installed and correctly configured on the Enterprise Vault server. 3. Restart the Enterprise Vault services. If the problem persists, see the "Troubleshooting" section of the Enterprise Vault Administration help file for guidelines on how to proceed. For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp

Error from StorageRestore: Saveset entry not found in SavesetInformation table SavesetID: %1 VaultID: %2 VaultStoreID: %3 <br>e.g.<br> Error from StorageRestore:<br> Saveset entry not found in SavesetInformation table<Br> SavesetID: 412313000000000~200303230956500000~0~896076EB73A6418FBA64A62196F604B<br> VaultID: 541954128021F7346AC667DAFB5D4A08B1110000vault.acme.com<br> VaultStoreID: 192696B383B8AD4119CE200508B070AE51210000vault.acme.com <br>

Error opening MSMQ Dead Letter Queue - Access is denied for queue %1 Using MSMQ Explorer, edit the permissions of the Computer on which the queue resides. Ensure that the local Administrators group has "Full Control" access. The computer properties to modify will be those of the system on which this error is logged. This can be verified by checking that the ID of the computer (displayed within the General tab of the Computer properties) corresponds with the queue name within this message.

An unexpected timeout occurred while attempting to access a queued message. This may have occurred because a message was not on a queue as expected or because the system is heavily loaded, thus causing excessive MSMQ delays. If you suspect the problem is caused by MSMQ delays, try increasing the Enterprise Vault "QueueTimeout" registry value, as described in the "Modifying Registry Settings" section in the Troubleshooting section of the Administrator help.

Error accessing a Saveset file Reason: %1 Saveset Id: %2 Vault: %3 Vault Id: %4 Reference: %5 <br>e.g.<br> Error accessing a Saveset file Reason: EMC Centera C-Clip contains incorrect Saveset Pool Address: ClipId: Expected: VaultStoreId: VaultId: SavesetId: Received: VaultStoreId: VaultId: SavesetId: [0xc0041a6b] Saveset Id: 441441000000000~200402050749290000~0~3E07C297FC0E4ACB961D6F17D06FB30 Vault: Dowd Elwood Vault Id: 125RE7T5K395ED94FAC9B99FDA89A0AB41110000ACMEVAULT.COM Reference: VSOP

Lost index operations have been detected. The loss has been ignored, and is assumed to be the result of restoring an old database from backup. %1 missing index operations were detected. [Internal reference %3] <br>e.g.<br> Lost index operations have been detected.<br> The loss has been ignored, and is assumed to be the result of restoring an old database from backup.<br> 162 missing index operations were detected.<br> [VaultId = 23T65YH431F653841B1401266A4093F861110000acmevault]<br> [Internal reference CCUAU]

Archive operation canceled because Saveset file is missing. [Vault Store: %1] [Vault ID: %2] [Saveset Filename: %3] [Transaction ID: %4] <br>e.g.<br> Archive operation canceled because Saveset file is missing.<br> [Vault Store: First Partition] <br> [Vault ID: 43T6Y5DEEB3CC0408395AABB97A970611110000ACMEVAULT]<br> [Saveset Filename: E:\Enterprise Vault Stores\ZKO\2003\04\18\00\313000000000000~200304180015030000~0.DVS] <br> [Transaction ID: 5921E4E294894B97BA52B4B70DB2266]

Item archive abandoning Message Id: %1 Label: %2 All previous attempts to archive the item have failed or been interrupted. To prevent further failures the item will not be archived. It is probable that the item will remain as 'pending archive' in the user's mailbox. <br>e.g.<br> Item archive abandoning <br> Message Id: {484HFDSY-743B-4410-8D1C-JF6064709ABE}\9543830 <br> Label: Saveset Message for Mailbox /o=ACME/ou=Messaging Administrative Group/cn=Recipients/cn=DowdP, Message titled: MessageTitle <br> All previous attempts to archive the item have failed or been interrupted. To prevent further failures the item will not be archived. It is probable that the item will remain as 'pending archive' in the user's mailbox.

e.g.<br> Storage Expiry Report <p> Vault Store Name: Vault Store 5 <br> Vault Store Id: 108059CA5FF8E724187568F7C863FCA6F1210000acme.kvsvault.com <p> Number of vaults processed: 7 <br> Number of vaults enabled for expiry: 7 <br> Total number of expired items deleted: 0 <br> <p> Items were deleted with the following retention categories: (none) <p> No items were deleted with the following retention categories: <br> PST (119988 months). Miscellaneous (12 months). Public (119988 months). Business (119988 months). Uncategorized (9999 years). Sent Items (119988 months). Deleted Items (3 months). Personal (60 months). <p> Expiry based on archived date <p> Start Time: 15/02/2004 12:00 <br> End Time: 15/02/2004 12:00

This is an example. Some details will be different<br> Unable to convert item content <p> Reason: Unspecified error [0x80004005] <br> Supplementary Info: Unknown converter error (0) <p> Item: Saveset Message for Mailbox /O=ACME/OU=ZKO/CN=RECIPIENTS/CN=DOWDP, Message titled: Invoice Subject: Invoices <br> Attachment: invoice1.pdf<br> Type: pdf <br> This item will be archived without a preview being available to the web application and the content will not be indexed. It is not possible to search on the content but the item can be restored as normal**This is an example. Some details may be different**<p> Unable to convert item content to HTML. The content has been converted to text<p> Reason: The requested allocation size was too large [0x80080011] Supplementary Info: <p> Item: SA:FSA-7C02A898D9FCBE26F617C3C20429F7A7--1751237826 Subject: hlog.zip <br> Attachment: <br> Type: zip <br> <p> The content of this item failed conversion to HTML but has been successfully converted to text. The item will be archived normally but the preview available in the web application will be text rather than HTML

%1 (%2) - Process failed PID: %3 Exit Code: %4 The process has failed abnormally and will not be restarted. Either the process has exceeded its restart count or automatic restart is disabled. The process can be restarted by stopping and restarting the Storage Service <br>For example:<br> Storage Archive Server (6) - Process failed <br> PID: 0 <br> Exit Code: Unspecified error [0x80004005] <br> <br> The process has failed abnormally and will not be restarted. Either the process has exceeded its restart count or automatic restart is disabled. The process can be restarted by stopping and restarting the Storage Service

An error occurred while moving items from the PST file to the designated Exchange Server mailbox folder PST file: %1 Exchange Server: %2 Mailbox DN: %3 Mailbox Folder: %4 Reference: %5 <br>e.g.<br> An error occurred while moving items from the PST file to the designated Exchange Server mailbox folder<br> PST file: E:\DOWDP_2002.PST <br> Exchange Server: ACMEEX1 <br> Mailbox DN: /O=ACME/OU=REO/CN=RECIPIENTS/CN=DOWDP<br> Mailbox Folder: Recruitment<br> Reference: MCM/GCT <br>

Update of Vault Index with Storage transactions %5 to %6 suspended whilst processing transaction number %7 Vault: %2 Vault Id: %1 Vault Store: %3 Vault Store Id: %4 Elapsed Time: %8 (hours:minutes:seconds) Number of index additions replayed: %9 Number of index deletions replayed: %10 NOTE: The total number of index additions and deletions replayed may be less than the number of transactions processed. This is because the index update process is optimized so that index additions are not replayed for items that are known to have been fully deleted from the Vault. Number of archived items with an old version of the common index elements: %11 Number of archived items updated with the latest version of the common index elements: %12 NOTE: Index additions were performed using the latest version of the common index elements stored in the archived item. Where necessary the archived item was updated with the latest version of the common index elements.

Example <p>PST Migration Report </p> <p>Migration status: Completed </p> <p>PST file: d:migrationsdowdp.pst <br />Archive Name: Elwood Dowd <br />Vault Id: 5F65JKE3T29DC114B96E02C9692488B0C1110000acme.com<br />RetentionCategory: Default <br />Exchange ServerMailbox: ACMEEXCH1Elwood Dowd </p> <p>Number of folders processed: 148 <br />Number of items archived: 11165 <br />Total size of items archived: 1372488 KB</p> <p>Number of items unable to be archived: 0 <br />Number of items moved to mailbox: 11428 </p> <p>Elapsed Migration Time: 2:27:20 (hours:minutes:seconds) </p>

Error opening EMC Centera C-Clip Function call: %1 Status: %2 (%3) Reason: %4 Pool Address: %5 <br>e.g.<br> Error opening EMC Centera C-Clip Function call: NetworkPacket.checkControl(2){HPPReadBlobTransaction.readBytes(HPPImportData&){HPPReadBlobTransaction.run(){ClusterCloud::readBlob(FPBasicGenericStream*,D4121FDA319ACe22ACME,,0,-1,-1,0){FPClip.Open(D4121FDA319ACe22ACME,1){FPClip_Open(-,FVF4VEEA319ACe22M8KSP0ACME,1) Status: FP_CLIP_NOT_FOUND_ERR (-10021) Reason: Clip CDF is not found in the pool (transid='ACMEVAULT01/931/READ_CLIP') Pool Address: 10.169.3.115,10.169.3.116,10.169.3.117,10.169.3.118

EMC Centera C-Clip contains incorrect Saveset Pool Address: %1 ClipId: %2 Expected: VaultStoreId: %3 VaultId: %4 SavesetId: %5 Received: VaultStoreId: %6 VaultId: %7 SavesetId: %8 <br>e.g.<br> EMC Centera C-Clip contains incorrect Saveset <br> Pool Address: 10.28.0.11,10.28.0.12,10.28.0.13,10.48.0.14 <br> ClipId: 543rt642IULOHeAFGKEQCSHP7OC <br> Expected: <br> VaultStoreId: 54RG67UIFF82E2F409375B900DEE0EB0A1210000ACMEVAULT <br> VaultId: 554FG6E37395ED94FAC9B99FDA89A0AB41110000ACMEVAULT<br> SavesetId: 219000000000000~200302040749290000~0~T5R43297FC0E4ACB961D6F17D06FB30 <br> Received: <br> VaultStoreId: 54RG67UIFF82E2F409375B900DEE0EB0A1210000ACMEVAULT <br> VaultId: &#53588;ñ&#7924;&#27075;&#53356;ñ&#27056;&#406; <br> SavesetId: 219000000000000~200302040749290000~0~T5R43297FC0E4ACB961D6F17D06FB30 <br>

Export Archive Report Export status: %1 Job Id: %2 Vault Name: %3 Vault Id: %4 Target Exchange Server\Mailbox: %5 Number of items restored: %6 Number of items unable to be restored: %7 Age range filter: %8 Retention category filter: %9 Elapsed Export Time: %10 (hours:minutes:seconds) <br>e.g.<br> Export Archive Report <BR> Export status: Completed <BR> Job Id: Exp1_20040621132529 <BR> Vault Name: Dowd, Elwood <BR> Vault Id: 14RT65322AD4FB4EA842C4106A2DA8401110000vault.acme.com<br> Target Exchange Server\Mailbox: ACMEEXCH1\Dowd, Elwood <br> Number of items restored: 321<br> Number of items unable to be restored: 2<br> Age range filter: (None) Retention category filter: (None) Elapsed Export Time: 00:04:18 (hours:minutes:seconds) <br>e.g.<br> Export Archive Report <br> Export status: Incomplete <br> Processing aborted due to an unrecoverable error. <br> Job Id: Exp3_20041414431943 <br> Archive Name: Dowd, Elwood<br> Vault Id: 5UTRLEW061FE5424A863424CFE79589991110000acme.com <br> Target PST file location: D:\PST Export\Dowd,Elwood_Export_0001.pst <br> Number of PST files: 1 <br> Number of items restored: 0 <br> Number of items unable to be restored: 1<br> Age range filter: <None> <br> Retention category filter: <None> <br> Elapsed Export Time: 00:00:05 (hours:minutes:seconds)

The Clip cannot be deleted from the EMC Centera Server. Pool Address: %1 Clip-Id: %2 VaultStoreId: %3 VaultId: %4 SavesetId: %5 This can be caused by the Clip Retention period or because the Centera does not allow deletes to be performed. <br />e.g.<br />The Clip cannot be deleted from the EMC Centera Server. <br />Pool Address: 127.13.17.13<br />Clip-Id: 3NMK8VSBGFOERe4LGVFV8V6BA5MG60VRFCN700000000000000000<br />VaultStoreId: 12FTR563123D88748849605BB6359FBB41210000vault.acme.com <br />VaultId: 414123120C102F041A2AA756D994B8D4E1110000vault.acme.com <br />SavesetId: 152000000000000~200401071644180000~0~BBB164935DB140AFBC5244C49865726 <br />This can be caused by the Clip Retention period or because the Centera does not allow deletes to be performed.

Error restoring Saveset during export operation. Job Id: %1 Vault Name: %2 Vault Id: %3 Saveset Id: %4 Reference: %5 <br>e.g.<br> Error restoring Saveset during export operation. Job Id: Exp3_20042227161943 <br> Vault Name: Dowd, Elwood<br> Vault Id: 59RG8R4L61FE5424A863424CFE79589991110000acme.com <br> Saveset Id: 54F040000000000~200203101505520000~0~RE43E359B16F4A71A68289D6D6F4501 <br> Reference: FMP/MAPI/SC <br>

A COM exception has been raised. %1 Internal reference %2 An exception is raised when a process encounters an unexpected fault. Contact your support representative with details of this and any preceding errors. <br>e.g.<br> A COM exception has been raised. <br> The SQL database server detected a deadlock while accessing the Vault Database '' <br>Description: Additional Microsoft supplied information: Source: Number: SQL State: Native Error: HRESULT SQL Command: [0xc0043433] Internal reference VaultStoreDB.cpp (CVaultStoreDB::GetNextSafeUniqueNumber) [lines {1994,2016,2019,2020,2021,2024}] built May 20 16:28:38 2004 <br> An exception is raised when a process encounters an unexpected fault. Contact your support representative with details of this and any preceding errors.

<p>Unable to complete archive request Reason: %1 Vault: %2 Vault Id: %3 Item: %4 Item Id: %5 Reference: %6 Supplementary Info: %7 </p> <p>e.g.</p> <p>Unable to complete archive request<br /><br />Reason: Item cannot be archived. Several attempts to archive the item have failed or been interrupted. To prevent further failures the item should not be presented for archival again. [0xc00419bb]<br />Vault: Misc<br />Vault Id: 1S4A45111C30D4944B86F75044F1999291110000ACME<br />Item: Saveset Message for Mailbox /o=ACME /ou=zko/cn=Recipients/cn=DowdP, Message titled: Six foot white rabbits<br /></p>Unable to complete retrieval request Reason: %1 Vault: %2 Vault Id: %3 Item Id: %4 Reference: %5 Suplementary Info: %6 %7 <br>e.g.<br> Unable to complete retrieval request <br> Reason: The parameter is incorrect. [0x80070057] <br> Vault: Elwood P Dowd Vault Id: 14123R5C6A87D544CB21A585D9047C2F71110000acme Item Id: 14123R5C6A87D544CB21A585D9047C2F71110000acme+300120000000000~200204110843120000~0~CEB18767AC5242B7A0D1D9DA18D5695+0++1321+2+38229.601894444444+86+702 Reference: LMI/rs Suplementary Info: EnterpriseVault.Collector Id: 1321

Cannot find the Enterprise Vault document conversion template file. Reason: %1 Template File: %2 Reverting to the standard template to generate HTML output. <br>e.g.<br> Cannot find the Enterprise Vault document conversion template file. <br> Reason: The system cannot find the file specified. [0x80070002] <br> Template File: C:\Program Files\Enterprise Vault\Converters\EVTemplateMain.htm <br> Reverting to the standard template to generate HTML output. <br>

Unable to update Vault Store Partition record. Partition : %2 Destination : %3 Internal references: Flags : %4 Error : %1 Reference : %5 <br>e.g.<br> Unable to update Vault Store Partition record.<br> Partition : 4JF8RKDSU7453LDPQ348A590E78088278071q10000kvault.acme.com<br> Destination : Internal references:<br> Flags : <br> Error : EMC Centera Collection cannot be disabled until all uncollected Savesets have been collected. If the Storage Service is not running start it and try again later. If the Storage Service is running try again later. [0xc0041af9]<br> Reference : StorageManage.cpp (CStorageManage::EMCCenteraDisableCollection) [lines {...,2967,2968,2977,2978,2982,2986,2987,2988,2998,3013,3017,3019}] built Feb 13 18:34:42 2004

A Partition's Collector run has finished. Partition Root Path: %1 %2 Saveset(s) were Collected into %3 Collection(s). %4 Collection(s) were Migrated to secondary storage. The run completed in %5. <br>e.g.<br> A Partition's Collector run has finished. <br> Partition Root Path: G:\Enterprise Vault Stores\ACME <br> 0 Saveset(s) were Collected into 0 Collection(s). <br> 0 Collection(s) were Migrated to secondary storage. <br> The run completed in 0 hour(s), 6 minute(s), 23 second(s).

e.g.<br> Completed archive conversion and update of Archive Index with Storage transactions 1 to 86830 <br> Archive: Elwood Dowd <br> Archive Id: 412RET5QD13DBD3119CAC00508B070AE51110000vault.acme.com <br> Vault Store: UK <br> Vault Store Id: 48FHE21DSEBDAD3119CAB00508B070AE51210000vault.acme.com<br> Elapsed Time: 1:10:34 (hours:minutes:seconds) <br> Number of index additions replayed: 1 <br> Number of index deletions replayed: 0 <br>

Update of Archive Index with Storage transactions from %5 to %6 suspended whilst processing transaction number %7 during archive conversion Archive: %2 Archive Id: %1 Vault Store: %3 Vault Store Id: %4 Elapsed Time: %8 (hours:minutes:seconds) Number of index additions replayed: %9 Number of index deletions replayed: %10 NOTE: The total number of index additions and deletions replayed may be less than the number of transactions processed. This is because the index update process is optimized so that index additions are not replayed for items that are known to have been fully deleted from the Vault. Number of archived items with an old version of the common index elements: %11 NOTE: Index additions used the common index elements stored in the archived item. Items with old versions of the common index elements may not be indexed with the same level of functionality as items archived using the latest version of the common index elements.

<p>A Collector encountered an error attempting to migrate Collection file %2 to %3. The Collector will abandon migration for the current run. Migration attempts will continue during future runs. Reason: %1 PartitionEntryID: %4 Secondary Storage Location: %5 Method: %6 (%7) </p> <p>e.g.</p> <p>A Collector encountered an error attempting to migrate Collection file E:\Enterprise Vault Stores\EXUSNY1 Ptn11\1999\01\02\Collection59766.CAB to F:\US\VAULT_STORES\EXUSNY1\Partition 11 migration\FB933F8AE14B4C4E9593C9212886AB36\1999\01\02\Collection59766.CAB. The Collector will abandon migration for the current run. Migration attempts will continue during future runs. </p> <p>Reason: The system cannot find the path specified. [0x80070003] </p> <p>PartitionEntryID: 1FB933F8AE14B4C4E9593C9212886AB361q10000ACME-NY </p> <p>Secondary Storage Location: F:\US\VAULT_STORES\EXUSNY1\Partition 11 migration </p> <p><font size="1"><font size="3">Method: CMigrator::SendFile (SF/CD/F:\US\VAULT_STORES\EXUSNY1\Partition 11 migration\FB933F8AE14B4C4E9593C9212886AB36)</font> </font></p>

The Access Control List of the archive/folder identified by %1 has been truncated because its length exceeded the maximum. Number of present Access Control Entries: %2 Number of truncated Access Control Entries: %3<br />e.g.<br />The Access Control List of the archive/folder identified by '140E5472153C07F4E9B91B53658461E1B1110000EV1.acme.com' has been truncated because its length exceeded the maximum.<br /><br />Number of present Access Control Entries: 1820<br />Number of truncated Access Control Entries: 34707<br /><br />For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp<br /><br /><br />

<p>A EMC Centera Collector thread encountered an error and has stopped. Reason: %1 PartitionEntryID: %2 Method: %3 </p> <p>e.g.</p> <p><font face="Courier New"><font size="4"><font face="Times New Roman, Times, serif"><span class="FIXEDFONT">A EMC Centera Collector thread encountered an error and has stopped.</span><br /></font><tt><span class="FIXEDFONT"><font face="Times New Roman, Times, serif">Reason: Not enough storage is available to complete this operation. &nbsp;[0x8007000e]</font>&nbsp;&nbsp;</span></tt></font></font></p>

The MigratorServer cannot start because the required version of MAPI is missing or incorrectly configured on the Enterprise Vault server: To resolve the problem: 1. Stop all Enterprise Vault services and processes that are using MAPI. 2. Ensure that a version of MAPI supplied with Microsoft Outlook 2003 or later is installed and correctly configured on the Enterprise Vault server. 3. Restart the Enterprise Vault services. If the problem persists, see the "Troubleshooting" section of the Enterprise Vault Administration help file for guidelines on how to proceed. For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp

Storage Expiry Report Vault Store Name: %1 Vault Store Id: %2 Number of vaults processed: %3 Number of vaults enabled for expiry: %4 Total number of expired items deleted: %5 Total number of items that could not be deleted: %6 Items marked with sent\received date based retention categories have been deleted: %9 Items marked with archived date based retention categories have been deleted: %10 Start Time: %7 End Time: %8 For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp Storage Expiry Report (Report Mode) Vault Store Name: %1 Vault Store Id: %2 Number of vaults processed: %3 Number of vaults enabled for expiry: %4 Total number of expired items: %5 Items marked with sent\received date based retention categories have been deleted: %8 Items marked with archived date based retention categories have been deleted: %9 Start Time: %6 End Time: %7 For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp

e.g.<br> Failed to commit Index updates to disk. <br> Reason: A low level indexing operation has failed<br> Error: Index Id: [0xc0041c43] <br> Index Id: 43TY212E2BA61EE40A0A1841221C018681110000acme.com<br> Index Path: F:\Indexes\43TY212E2BA61EE40A0A1841221C018681110000acme.com <br> Available Disk Space: 0 KB(0 KB) <br> Number of Items added: 46 <br> Number of Items deleted: 0 <br> Number of new words: 35283 <br> Additional Info: Makestable <br> Vers:1401 Mem Load:9771 (Max:1310720) KB

Search request failed. Reason: %1 Index Id: %2 Requestor: %3 Search Query: %4 Search Arguments: %5 <br>e.g.<br> search request failed. <br> Reason: Operation aborted [0x80004004] <br> Index Id: 1412G54341FDC9C4D883B46D36ED8397F1110000vault.acme.com (share) <br> Requestor: ACME\Dowd<br> Search Query: "subj" 40 "file extensions"<br> Search Arguments: Start: 1 Number: 10, Options:0x10000<br> Schema:0x1fdbfa Format:0 PI: CP: <br>

<p>Failed to add item to the index due to failure loading the item's index metadata. Reason: %1 Index Id: %2 Saveset Id: %3 Internal reference: %4 For more information, see Help and Support Center at <a href="http://evevent.veritas.com/rosetta/showevent.asp">http://evevent.veritas.com/rosetta/showevent.asp</a> </p> <p>e.g.&nbsp; Failed to add item to the index due to failure loading the item's index metadata. |Reason: No such interface supported [0x80004002] |Index Id: 213D931093CC94A429D26CADD47E332CA1110000ACME/Volume:7 (MailboxAliasName) |Saveset Id: 128412000000000~200401071308210000~0~138DA8FD60624EB693BA9F1FCC9A22C |Internal reference: XML II load |<br /></p>

<p>Unable to add the item to the index since it is not currently available from the Storage Service. Reason: %1 Attempt: %2 Index: %3 Saveset Id: %4 Sequence Number: %5 For more information, see Help and Support Center at <a href="http://evevent.veritas.com/rosetta/showevent.asp">http://evevent.veritas.com/rosetta/showevent.asp</a> </p><font size="1"> <p><font size="2">Unable to add the item to the index since it is not currently available from the Storage Service.</font></p> <p><font size="2">Reason: Saveset is temporarily unavailable. Try operation again later. [0x80041b03]</font></p> <p><font size="2">Attempt: 7</font></p> <p><font size="2">Index: 1R4WKFIR5S9A7D74E9344C1942C220A2B111000ACME/Volume:1 (JOURNALVAULT)</font></p> <p><font size="2">Saveset Id: 41D5A0000000000~200305102205190000~0~42025941687F4C16A058C95C64CB495</font></p> <p><font size="2">Sequence Number: 607122</font></p></font>

Aborted index volume update Reason: %1 Aborted by: %2 Index Volume: %3 Index Volume Path: %4 Job Id: %5 Job Author: %6 Job Description: %7 Job elapsed time: %8 (hours:minutes:seconds) Processing time: %9 (hours:minutes:seconds) Number of items added: %10 Number of items additions abandoned: %11 Number of items deleted: %12 For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp

Index volume update in progress Index Volume: %1 Percentage completed: %2 Estimated time of completion: %3 Index Volume Path: %4 Job Id: %5 Job Author: %6 Job Description: %7 Job elapsed time: %8 (hours:minutes:seconds) Processing time: %9 (hours:minutes:seconds) Number of items added: %10 Number of items additions abandoned: %11 Number of items deleted: %12 For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp

The count of failed items in the log file does not match the number recorded in the directory database. The Indexing service will use the count that is in the log file to update the database. Run the IndexCheck tool against this index volume to ensure that the log file is up to date. Index Volume: %1 Index Volume Path: %2 Log File: IndexMissiing.log Number of failed items in the log file: %3 Number of failed items recorded in the database: %4 For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp

Index volume update in progress Index Volume: %1 Percentage completed: %2 Estimated time of completion: %3 Index Volume Path: %4 Job Id: %5 Job Author: %6 Job Description: %7 Job elapsed time: %8 (hours:minutes:seconds) Processing time: %9 (hours:minutes:seconds) Number of items added: %10 Number of items additions abandoned: %11 Number of items deleted: %12 Number of items updated: %13 For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp Aborted index volume update Reason: %1 Aborted by: %2 Index Volume: %3 Index Volume Path: %4 Job Id: %5 Job Author: %6 Job Description: %7 Job elapsed time: %8 (hours:minutes:seconds) Processing time: %9 (hours:minutes:seconds) Number of items added: %10 Number of items additions abandoned: %11 Number of items deleted: %12 Number of items updated: %13 For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp Completed index volume update Index Volume: %1 Index Volume Path: %2 Job Id: %3 Job Author: %4 Job Description: %5 Job elapsed time: %6 (hours:minutes:seconds) Processing time: %7 (hours:minutes:seconds) Number of items added: %8 Number of items additions abandoned: %9 Number of items deleted: %10 Number of items updated: %11 For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp

The Directory Service is waiting for another Directory Service to complete an update of the EnterpriseVaultDirectory database, or waiting to get exclusive access to the EnterpriseVaultDirectory database. Please ensure no applications, for example SQL Enterprise Manager or SQL Query Analyzer, are accessing the EnterpriseVaultDirectory database. %1 For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp

The Directory Service is running on Windows 2000 and the Windows 2000 Authorization Manager Runtime is not installed. Role Based Administration will not be available until the Windows 2000 Authorization Manager Runtime component is installed. Until then, only users running under the Vault Service Account will be able to administer Enterprise Vault. For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp

The Enterprise Vault Domino Server '%1' could not be contacted. It has been removed from the list of active servers for domain '%s2'. Ensure that this server can be reached over the network and is operating correctly. The server will be added to the active list shortly after connectivity is restored, or when the Domino server is restarted. If necessary you can increase the connection failure limit by setting the EVDomSvrMaxFailures registry value. See the documentation for further details. For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp

An error was detected while accessing the Vault Database '%2' (Internal reference: %3), error code <%1>. SQL Command: %4 <br>e.g.<br> An error was detected while accessing the Vault Database 'EVSales' (Internal reference: ADODataAccess.cpp (CADODataAccess::AddRecord) [lines {336,337}] built Jul 7 11:45:12 2004), error code <0x80040e14>.<br> SQL Command:<br> INSERT INTO Saveset (ArchivePointIdentity,ArchivedDate,IdChecksumHigh,IdChecksumLow,IdDateTime,IdPartition,IdTransaction,IdUniqueNo,IndexSeqNo,ItemSize,RetentionCategoryIdentity,VaultIdentity ) VALUES ( 51,GETDATE(),1922000,0,CONVERT(datetime,'20030827 19:54:37:000',121),6,'30294952-1791-417D-BDE6-290BB3283590',0,238849,26,4,58)

An error was detected while accessing the Vault Database '%2' (Internal reference: %8): Description: %1 SQL Command: %9 Additional Microsoft supplied information: Source: %3 Number: %4 SQL State: %5 Native Error: %6 HRESULT %7 <br>e.g.<br> An error was detected while accessing the Vault Database 'EVTargetedVS' (Internal reference: BT3): <br> Description: <br> [Microsoft][ODBC SQL Server Driver][DBNETLIB]ConnectionWrite (send()). <br> SQL Command: N/A An error was detected while accessing the Vault Database '%2' (Internal reference: %7): Description: %1 SQL Command: %8 Additional Microsoft supplied information: Source: %3 Number: %4 SQL State: %5 Native Error: %6 <br>e.g.<br> An error was detected while accessing the Vault Database 'EVStore1' (Internal reference: ADODataAccess.cpp (CADODataAccess::ExecuteSQLCommand) [lines {1085,1087,1090,1132,1133,1148}] built Dec 9 17:50:56 2003): Description: [Microsoft][ODBC SQL Server Driver][SQL Server]Could not allocate space for object 'JournalArchive' in database 'EVStore1' because the 'PRIMARY' filegroup is full.

e.g.<br> The SQL database server for EVTargetedVS is not available: Check that the SQL Server is valid and is running <br> Internal reference(BT3) Description: <br> [Microsoft][ODBC SQL Server Driver][DBNETLIB]General network error. Check your network documentation. <br> Additional Microsoft supplied information: <br> Source: Microsoft OLE DB Provider for ODBC Drivers Number: 0x8004d008 SQL State: 08S01 Native Error: 00000011 HRESULT 0x8004d008

e.g.<br> An error was detected while accessing the Vault Database 'EnterpriseVaultDirectory'. If multiple instances of SQL Server exist ensure the correct instance was specified (Internal reference: CC1): <br> Description: [Microsoft][ODBC SQL Server Driver][Shared Memory]SQL Server does not exist or access denied.<br> SQL Command: N/A <br> Additional Microsoft supplied information:<br> Source: Microsoft OLE DB Provider for ODBC Drivers<br> Number: 0x80004005 <br> SQL State: 08001 <br> Native Error: 00000017 <br> HRESULT 0xc0043433<br>

The following folders have exactly the same Vault properties: (a) %1 (b) %2 Possible causes (and their outcome) of this problem: 1) Folder (a) is a copy of (b). A new Vault will be created for the folder (a) 2) Folder (a) has been renamed and a new folder (b) created with the original pathname. The original Vault for folder (a) will no longer have its permissions automatically synchronized and items in this folder may not be available to all its subscribers. A new Vault will be created for both folders (a) and (b).

The SPS service cannot start because the required version of MAPI is missing or incorrectly configured on the Enterprise Vault server: To resolve the problem: 1. Stop all Enterprise Vault services and processes that are using MAPI. 2. Ensure that a version of MAPI supplied with Microsoft Outlook 2003 or later is installed and correctly configured on the Enterprise Vault server. 3. Restart the Enterprise Vault services. If the problem persists, see the "Troubleshooting" section of the Enterprise Vault Administration help file for guidelines on how to proceed. For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp

Downloaded file is not the expected size: Url: %1, Content length: %2 bytes File: %3, Size: %4 bytes <br>e.g.<br> http://uk01.lfc.local/EnterpriseVault/download.asp?VaultID=120B6E2C99D16664C8DD661D2A36CA6FB1110000uk01.lfc.local&SavesetId=199000000000000~200305300846020000~0~A95EFEA3F9274A10BFE41B9FBC56BB3&Request=NativeItem&EVHeaders=1, Content length: 106406912 bytes File: \\?\E:\LARGE_FILES\CENTERA TEST\EVPS_7100_3152_200552011371.tmp, Size: 104857600 bytes

The FSAReportingService process will be shut down because there is insufficient disk space on drive %1. Delete any unwanted files from the drive and then restart the process as follows. On file servers on which the FSA Agent is installed, restart the Enterprise Vault File Collector Service. Otherwise, restart the Enterprise Vault Admin Service on the Enterprise Vault server. For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp

The SQL database transaction log for Vault Store '{0}' has used {1}% of its allocated space.\n\nThe information in this database is at risk until the database has been backed up.\n\nReview your SQL database backup procedures and make any changes needed to ensure that backups happen in a timely fashion.\n\nEnsure that your database is adequately sized for the transactions taking place during an archive run.\n\nAlso check that there is enough disk space available to accommodate any growth in your database and database transaction log files.

The Directory database transaction log has used {0}% of its allocated space.\n\nThe information in this database is at risk until the database has been backed up.\n\nReview your SQL database backup procedures and make any changes needed to ensure that backups happen in a timely fashion.\n\nEnsure that your database is adequately sized for the transactions taking place during an archive run.\n\nAlso check that there is enough disk space available to accommodate any growth in your database and database transaction log files.

The File Server Archive Manager cannot start because the required version of MAPI is missing or incorrectly configured on the Enterprise Vault server:\n\nTo resolve the problem:\n\n1. Stop all Enterprise Vault services and processes that are using MAPI.\n2. Ensure that a version of MAPI supplied with Microsoft Outlook 2003 or later is installed and correctly configured on the Enterprise Vault server.\n3. Restart the Enterprise Vault services.If the problem persists, see the "Troubleshooting" section of the Enterprise Vault Administration help file for guidelines on how to proceed.

<p>The Exchange mailbox provisioning task failed during processing of a mailbox. The task is continuing. Task: {0} User: {1} Mailbox: {2} Provisioning group: {3} Group member: {4} Error: {5} Trace: {6} </p> <p>e.g.</p> <p><font face="Courier New" size="4">The Exchange mailbox provisioning task failed during processing of a mailbox. The process will continue.<br /><br />Error: SqlDateTime overflow. Must be between 1/1/1753 12:00:00 AM and 12/31/9999 11:59:59 PM.</font> </p>

<p>e.g.</p><font size="1"> <p><font size="3">The Exchange mailbox provisioning task found enabled mailboxes that are not part of a provisioning group. These mailboxes cannot be archived. If you do not want these mailboxes to be archived, use the Administration Console to disable them. See the provisioning task report for further details (full reports only).</font></p> <p><font size="3">Task: Exchange Provisioning Task for enterprise.veritas.com</font></p> <p><font size="3">Domain: enterprise.acme.com</font></p></font>

The Exchange mailbox provisioning task found some mailboxes that are not eligible for processing by this task.\n\nThis task will process mailboxes on every Exchange Server in this domain that has been added to the Administration Console.\n\nIf you want this task to process such mailboxes, add the host Exchange Server to the Administration Console.\n\nTo include the names of these mailboxes in the provisioning task report, set the 'DisableExternalMbxLogging' registry value to 0.\n\nTask: {0}\n\nDomain: {1}

{0}The Exchange provisioning task found a mailbox with duplicate entries in the Enterprise Vault database, and automatically removed the duplicates. The default Vault ID of the most recent entry has been selected for this mailbox.\n\nThe mailbox is not currently enabled for client-side PST migration. You may wish to review this setting to confirm that it is correct.\n\nTask: {1}\n\nDomain: {2}\n\nMailbox: {3}\n\nEntryID: {4}\n\nDefault Vault ID: {5}\n\nDuplicate entries removed: {6}\n\nAssociated default Vault IDs: {7}{0}The Exchange provisioning task found a mailbox with duplicate entries in the Enterprise Vault database, and automatically removed the duplicates. The default Vault ID of the most recent entry has been selected for this mailbox.\n\nSome PST files were associated with one or more of the deleted entries. You may need to amend the database to associate the PST files with the new entry for this mailbox - contact support if required.\n\nThe mailbox is not currently enabled for client-side PST migration. You may wish to review this setting to confirm whether it is correct.\n\nTask: {1}\n\nDomain: {2}\n\nMailbox: {3}\n\nEntryID: {4}\n\nDefault Vault ID: {5}\n\nDuplicate entries removed: {6}\n\nAssociated default Vault IDs: {7}

<p>There was an error processing an item in a mailbox. The task will process the item again on the next archiving run. Task: {0} Mailbox: {1} NoteID: {2} Subject: {3} Error: {4} Trace: {5} </p> <p>e.g.</p> <p>There was an error processing an item in a mailbox. The task will process the <br />item again on the next archiving run.</p> <p>Task: Domino Mailbox Archiving Task</p> <p>Mailbox: 'SERVER/ACME1!!mail\dowd'-CN=Elwood <a href="mailto:Dowd/O=ACME1@MYDOMAIN">Dowd/O=ACME1@MYDOMAIN</a></p> <p>NoteID: 110e</p> <p>Subject: &lt;unavailable&gt;</p> <p>Error: Error(3637): Unable to open note 110e - Cannot convert MIME message to <br />Notes Rich Text message.</p> <p>Trace:&nbsp;&nbsp;&nbsp; at DomNote.Open()<br />&nbsp;&nbsp; at LotusDominoMailboxArchivingTask.BaseQItem.OpenNote()<br />&nbsp;&nbsp; at LotusDominoMailboxArchivingTask.ArchiveQItem.Process()</p> <p></p>

Enterprise Vault found encrypted notes in the Domino journal that do not appear to be encrypted by a user and that could not be decrypted by the journaling ID.\n\nCheck that you are using the correct journaling ID for this journal database. If you would like to archive these notes in their encrypted form, set the DominoJournalArchiveNonDecryptableNotes registry value to 1. See the documentation for further details.\n\nTask: {0}\n\nJournal database: {1}\n\nJournaling ID: {2}\n\nNote IDs: {3}

The Content Cache Request Manager failed to process a client request because of one or more of the following: \n * Cache Location (Set in Server Properties)\n * 'Maximum Cache Size' (Set in Server Properties)\n * 'Maximum Concurrent Vault Cache Updates' is set to 0 (Set in Server Properties)\n * The Directory Service is unavailable\n * The Storage Service is unavailable\n\n The Content Cache Request Manager will work in 'offline' mode until the problem is fixed.

The SQL database transaction log for Vault Store Group '{0}' has used {1}% of its allocated space.\n\nThe information in this database is at risk until the database has been backed up.\n\nReview your SQL database backup procedures and make any changes needed to ensure that backups happen in a timely fashion.\n\nEnsure that your database is adequately sized for the transactions taking place during an archive run.\n\nAlso check that there is enough disk space available to accommodate any growth in your database and database transaction log files.

Move archive has detected an error occurred when the items in the destination archive were being verified following a backup.\nThe maximum retry threshold has been reached and Archive moves will no longer attempt to re-copy any further items.\n\nPlease check the event log on the Enterprise Vault server where the destination archive is located.\nPlease check the Move archive log file on the Enterprise Vault server where the source archive is located.\n\nThe move archive documentation contains more information about setting the threshold for the maximum number of retries.\n\nSource archive: {0}\n\nDestination archive: {1}\n\nDestination Vault Store: {2}

Mailbox Report Date: %1 System Name: %2 Mailbox Name: %3 Associated Account: %13 Mailbox State: %18 Mailbox Quota Limit: %14 KB Mailbox Quota Used: %15 KB Percentage of Mailbox Quota free: %16 Number of archivable items in mailbox: %4 Total size of archivable items in mailbox: %5 KB Number of archivable folders in mailbox: %6 Number of items ready to archive: %7 Total size of items ready to archive: %8 KB Number of items that would be archived: %9 Total size of items that would be archived: %10 KB Number of expired shortcuts that would be deleted: %17 Start Time: %11 End Time: %12

This is an example. Details may be quite different.<p> A queued operation exceeded the retry count and has been discarded<p> Enterprise Vault Journaling Service for ACMEEXCH1<p> m_pIBackgroundArchivingAgent->ProcessItem(Priority = "true",<br> ExchangeSystem = "ACMEEXCH1",<br> m_pILocation,<br> (ULONG)EntryIdSize = 70,<br> EntryId,<br> ArchiveId = "1828E94DA5D483744B6E82329221A153A1110000huyton.zko.acme.com",<br> RetentionCategory= "181667B5FEBDAD3119CAB00508B070AE51b10000huyton.zko.acme.com",<br> UserMailboxDn = "/o=ACME/ou=EENGINEERING/cn=Servers/cn=stewart-journal",<br> MessageTitle = "Tax Return",<br> nRetryCount = 3,<br> NULL,<br> CallerSID,<br> isAReArchive = 0, ArchiveTransId = "5E24F8CD11B14E60A60A8443859FF7F", IndexedPropertiesSet = "");<p> HRESULT: 0x80070057 %2

The IRestorationAgent->RestoreItem() function failed whilst processing the item with TransactionID: %1, SavesetID: %2 Number of retries: %3 The retrieval request has failed because the associated Saveset could not be found on the spool queue. The retrieval request will now be discarded It is possible that the Saveset has been removed from the spool queue because it has not been received in time. <br>e.g.<br> The IRestorationAgent->RestoreItem() function failed whilst processing the item with TransactionID: 5123104F6ADC42AAB41C617FFE1A3FE, SavesetID: 101310000000000~200304180803140000~0~5303A7CBB67642ACAB2B555CEB49ED7 <br>Number of retries: 30 <br> The retrieval request has failed because the associated Saveset could not be found on the spool queue. The retrieval request will now be discarded <br> It is possible that the Saveset has been removed from the spool queue because it has not been received in time.

The mailbox %1, has exceeded its "Prohibit Send & Receive" limit and cannot be processed. Maximum allowed: %2 KB Current level : %3 KB If you wish Enterprise Vault to archive items from this mailbox then this quota must be removed. <p>e.g.<br> The mailbox /O=ACME/OU=REO/CN=RECIPIENTS/CN=DOWDP, has exceeded its "Prohibit Send & Receive" limit and cannot be processed.<br> Maximum allowed: 4000 KB<br> Current level : 7000 KB<br> If you wish Enterprise Vault to archive items from this mailbox then this quota must be removed.

<font face="Courier New"><span class="FIXEDFONT">The following message could not be archived by the Journaling Service as it may be corrupt. </span><br /><tt><span class="FIXEDFONT">Title: %1</span></tt></font><br /><tt><span class="FIXEDFONT">Mailbox: %2 </span></tt><br /><br /><tt><span class="FIXEDFONT">An error occurred whilst moving the message to the 'Enterprise Vault Journaling Service\Failed to copy' folder. The message has been marked as "Do Not Archive", and no further attempts will be made to archive this message.</span></tt><br />

A MSMQ negative acknowledgment message has been processed for a message of type 'PROCESS MAILBOX EX'. The Exchange User Mailbox: %1 on the Exchange system: %2 will not be automatically archived until the next archive scheduled period <br>e.g.<br> A MSMQ negative acknowledgment message has been processed for a message of type 'PROCESS MAILBOX EX'. The Exchange User Mailbox: /O=ACME/OU=ZKO/CN=RECIPIENTS/CN=ELWOODP on the Exchange system: /o=Acme/ou=ZKO/cn=Configuration/cn=Servers/cn=EXCHANGE/cn=Microsoft Private MDB will not be automatically archived until the next archive scheduled period

The number of items pending indexing for the archive has grown above the threshold limit. This service will pause for 5 minutes to allow the backlog to clear. Mailbox: %1 Archive Name: %2 Archive Id: %3 Service: %4 <p>e.g.<br> The number of items pending indexing for the archive has grown above the threshold limit. This service will pause for 5 minutes to allow the backlog to clear. <p> Mailbox: /o=ACME/ou=REO/cn=Recipients/cn=journal <br> Archive Name: Journal <br> Archive Id: 43ITR8E453A1ED611BE120002A58CDB441110000ACME.COM<br> Service: Enterprise Vault Journaling Service for ACMEEXCH1<br>

The task controller cannot start the following MAPI-dependent tasks because the required version of MAPI is missing or incorrectly configured on the Enterprise Vault server: %1 To resolve the problem: 1. Stop all Enterprise Vault services and processes that are using MAPI. 2. Ensure that a version of MAPI supplied with Microsoft Outlook 2003 or later is installed and correctly configured on the Enterprise Vault server. 3. Restart the Enterprise Vault services. If the problem persists, see the "Troubleshooting" section of the Enterprise Vault Administration help file for guidelines on how to proceed. For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp

<p>e.g.</p><font size="1"> <p><font size="2">Summary for shortcut deletion.</font></p> <p><font size="2">Mailbox: '/o=Enterprise/ou=MDH/cn=ADC/cn=Users/cn=Elwood Dowd':</font></p> <p><font size="2">Total number of shortcuts found: 5132</font></p> <p><font size="2">Number of expired shortcuts deleted: 157</font></p> <p><font size="2">Number of orphaned shortcuts deleted: 0</font></p> <p><font size="2">Number of old shortcuts deleted: 303</font></p> <p><font size="2">Total number of shortcuts remaining: 4672</font></p></font>

Mailbox Report Date: %1 System Name: %2 Mailbox Name: %3 Associated Account: %13 Policy: %28 Mailbox State: %20 Mailbox Quota Limit: %14 KB Mailbox Quota Used: %15 KB Percentage of Mailbox Quota free: %16 Number of archivable items in mailbox: %4 Total size of archivable items in mailbox: %5 KB Number of archivable folders in mailbox: %6 Number of items ready to archive: %7 Total size of items ready to archive: %8 KB Number of items that would be archived: %9 Total size of items that would be archived: %10 KB Number of expired shortcuts that would be deleted: %17 Number of orphaned shortcuts that would be deleted: %18 Number of old shortcuts that would be deleted: %19 Start Time: %11 End Time: %12 For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp Public Folder Report Date: %1 System Name: %2 Public Folder start point: %3 Policy: %23 Number of archivable items (from start point): %4 Total size of archivable items (from start point): %5 KB Number of folders processed: %6 Number of items ready to archive: %7 Total size of items ready to archive: %8 KB Number of items that would be archived: %9 Total size of items that would be archived: %10 KB Number of expired shortcuts that would be deleted: %13 Number of orphaned shortcuts that would be deleted: %14 Number of old shortcuts that would be deleted: %15 Start Time: %11 End Time: %12 For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp

Could not update shortcut. The archiving task cannot process one or more shortcuts to items that have been migrated from Domino. The RestoreShortcutBody registry value is set. This registry value makes the archiving task rebuild Enterprise Vault shortcuts for Exchange Server messages and shortcuts to items that have been migrated from Domino. The archiving task cannot initialize the Lotus Notes runtime in order to process items that have been migrated from Domino. Check that Lotus Notes is correctly installed on the server that is running the archiving task. Exchange Server shortcuts can be processed correctly. For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp

%1 Startup is being canceled due to failure of service synchronization The service depends on one or more Enterprise Vault services that have not become fully operational during the service synchronization period The most likely cause of the failure is that the Directory service is not running <br>e.g.<br> Enterprise Vault Public Folder Service - ACME IT is being canceled due to failure of service synchronization The service depends on one or more Enterprise Vault services that have not become fully operational during the service synchronization period. <br> The most likely cause of the failure is that the Directory service is not running

The %1 service failed to respond to the STOP request in a timely manner. This may be due to the service getting insufficient CPU time; check subsequent event log entries for a "successfully stopped" message. If the service is still running, manually stop the service and check the event log for any errors logged by the service. <br>e.g.<br> The Enterprise Vault Archiving Service for ACMEEXCH1 service failed to respond to the STOP request in a timely manner. This may be due to the service getting insufficient CPU time; check subsequent event log entries for a "successfully stopped" message. If the service is still running, manually stop the service and check the event log for any errors logged by the service.

The Shopping Service cannot perform the requested MAPI dependent operation because the required version of MAPI is missing or incorrectly configured on the Enterprise Vault server: To resolve the problem: 1. Stop all Enterprise Vault services and processes that are using MAPI. 2. Ensure that a version of MAPI supplied with Microsoft Outlook 2003 or later is installed and correctly configured on the Enterprise Vault server. 3. Restart the Enterprise Vault services. If the problem persists, see the "Troubleshooting" section of the Enterprise Vault Administration help file for guidelines on how to proceed. For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp

Error accessing a Saveset file Reason: %1 Saveset Id: %2 Vault: %3 Vault Id: %4 Reference: %5 <br>e.g.<br> Error accessing a Saveset file Reason: EMC Centera C-Clip contains incorrect Saveset Pool Address: ClipId: Expected: VaultStoreId: VaultId: SavesetId: Received: VaultStoreId: VaultId: SavesetId: [0xc0041a6b] Saveset Id: 441441000000000~200402050749290000~0~3E07C297FC0E4ACB961D6F17D06FB30 Vault: Dowd Elwood Vault Id: 125RE7T5K395ED94FAC9B99FDA89A0AB41110000ACMEVAULT.COM Reference: VSOP

Item archive abandoning Message Id: %1 Label: %2 All previous attempts to archive the item have failed or been interrupted. To prevent further failures the item will not be archived. It is probable that the item will remain as 'pending archive' in the user's mailbox. <br>e.g.<br> Item archive abandoning <br> Message Id: {484HFDSY-743B-4410-8D1C-JF6064709ABE}\9543830 <br> Label: Saveset Message for Mailbox /o=ACME/ou=Messaging Administrative Group/cn=Recipients/cn=DowdP, Message titled: MessageTitle <br> All previous attempts to archive the item have failed or been interrupted. To prevent further failures the item will not be archived. It is probable that the item will remain as 'pending archive' in the user's mailbox.

e.g.<br> Storage Expiry Report <p> Vault Store Name: Vault Store 5 <br> Vault Store Id: 108059CA5FF8E724187568F7C863FCA6F1210000acme.kvsvault.com <p> Number of vaults processed: 7 <br> Number of vaults enabled for expiry: 7 <br> Total number of expired items deleted: 0 <br> <p> Items were deleted with the following retention categories: (none) <p> No items were deleted with the following retention categories: <br> PST (119988 months). Miscellaneous (12 months). Public (119988 months). Business (119988 months). Uncategorized (9999 years). Sent Items (119988 months). Deleted Items (3 months). Personal (60 months). <p> Expiry based on archived date <p> Start Time: 15/02/2004 12:00 <br> End Time: 15/02/2004 12:00

This is an example. Some details will be different<br> Unable to convert item content <p> Reason: Unspecified error [0x80004005] <br> Supplementary Info: Unknown converter error (0) <p> Item: Saveset Message for Mailbox /O=ACME/OU=ZKO/CN=RECIPIENTS/CN=DOWDP, Message titled: Invoice Subject: Invoices <br> Attachment: invoice1.pdf<br> Type: pdf <br> This item will be archived without a preview being available to the web application and the content will not be indexed. It is not possible to search on the content but the item can be restored as normal**This is an example. Some details may be different**<p> Unable to convert item content to HTML. The content has been converted to text<p> Reason: The requested allocation size was too large [0x80080011] Supplementary Info: <p> Item: SA:FSA-7C02A898D9FCBE26F617C3C20429F7A7--1751237826 Subject: hlog.zip <br> Attachment: <br> Type: zip <br> <p> The content of this item failed conversion to HTML but has been successfully converted to text. The item will be archived normally but the preview available in the web application will be text rather than HTML

%1 (%2) - Process failed PID: %3 Exit Code: %4 The process has failed abnormally and will not be restarted. Either the process has exceeded its restart count or automatic restart is disabled. The process can be restarted by stopping and restarting the Storage Service <br>For example:<br> Storage Archive Server (6) - Process failed <br> PID: 0 <br> Exit Code: Unspecified error [0x80004005] <br> <br> The process has failed abnormally and will not be restarted. Either the process has exceeded its restart count or automatic restart is disabled. The process can be restarted by stopping and restarting the Storage Service

Update of Vault Index with Storage transactions %5 to %6 suspended whilst processing transaction number %7 Vault: %2 Vault Id: %1 Vault Store: %3 Vault Store Id: %4 Elapsed Time: %8 (hours:minutes:seconds) Number of index additions replayed: %9 Number of index deletions replayed: %10 NOTE: The total number of index additions and deletions replayed may be less than the number of transactions processed. This is because the index update process is optimized so that index additions are not replayed for items that are known to have been fully deleted from the Vault. Number of archived items with an old version of the common index elements: %11 Number of archived items updated with the latest version of the common index elements: %12 NOTE: Index additions were performed using the latest version of the common index elements stored in the archived item. Where necessary the archived item was updated with the latest version of the common index elements.

Example <p>PST Migration Report </p> <p>Migration status: Completed </p> <p>PST file: d:migrationsdowdp.pst <br />Archive Name: Elwood Dowd <br />Vault Id: 5F65JKE3T29DC114B96E02C9692488B0C1110000acme.com<br />RetentionCategory: Default <br />Exchange ServerMailbox: ACMEEXCH1Elwood Dowd </p> <p>Number of folders processed: 148 <br />Number of items archived: 11165 <br />Total size of items archived: 1372488 KB</p> <p>Number of items unable to be archived: 0 <br />Number of items moved to mailbox: 11428 </p> <p>Elapsed Migration Time: 2:27:20 (hours:minutes:seconds) </p>

Error opening EMC Centera C-Clip Function call: %1 Status: %2 (%3) Reason: %4 Pool Address: %5 <br>e.g.<br> Error opening EMC Centera C-Clip Function call: NetworkPacket.checkControl(2){HPPReadBlobTransaction.readBytes(HPPImportData&){HPPReadBlobTransaction.run(){ClusterCloud::readBlob(FPBasicGenericStream*,D4121FDA319ACe22ACME,,0,-1,-1,0){FPClip.Open(D4121FDA319ACe22ACME,1){FPClip_Open(-,FVF4VEEA319ACe22M8KSP0ACME,1) Status: FP_CLIP_NOT_FOUND_ERR (-10021) Reason: Clip CDF is not found in the pool (transid='ACMEVAULT01/931/READ_CLIP') Pool Address: 10.169.3.115,10.169.3.116,10.169.3.117,10.169.3.118

EMC Centera C-Clip contains incorrect Saveset Pool Address: %1 ClipId: %2 Expected: VaultStoreId: %3 VaultId: %4 SavesetId: %5 Received: VaultStoreId: %6 VaultId: %7 SavesetId: %8 <br>e.g.<br> EMC Centera C-Clip contains incorrect Saveset <br> Pool Address: 10.28.0.11,10.28.0.12,10.28.0.13,10.48.0.14 <br> ClipId: 543rt642IULOHeAFGKEQCSHP7OC <br> Expected: <br> VaultStoreId: 54RG67UIFF82E2F409375B900DEE0EB0A1210000ACMEVAULT <br> VaultId: 554FG6E37395ED94FAC9B99FDA89A0AB41110000ACMEVAULT<br> SavesetId: 219000000000000~200302040749290000~0~T5R43297FC0E4ACB961D6F17D06FB30 <br> Received: <br> VaultStoreId: 54RG67UIFF82E2F409375B900DEE0EB0A1210000ACMEVAULT <br> VaultId: &#53588;ñ&#7924;&#27075;&#53356;ñ&#27056;&#406; <br> SavesetId: 219000000000000~200302040749290000~0~T5R43297FC0E4ACB961D6F17D06FB30 <br>

Export Archive Report Export status: %1 Job Id: %2 Vault Name: %3 Vault Id: %4 Target Exchange Server\Mailbox: %5 Number of items restored: %6 Number of items unable to be restored: %7 Age range filter: %8 Retention category filter: %9 Elapsed Export Time: %10 (hours:minutes:seconds) <br>e.g.<br> Export Archive Report <BR> Export status: Completed <BR> Job Id: Exp1_20040621132529 <BR> Vault Name: Dowd, Elwood <BR> Vault Id: 14RT65322AD4FB4EA842C4106A2DA8401110000vault.acme.com<br> Target Exchange Server\Mailbox: ACMEEXCH1\Dowd, Elwood <br> Number of items restored: 321<br> Number of items unable to be restored: 2<br> Age range filter: (None) Retention category filter: (None) Elapsed Export Time: 00:04:18 (hours:minutes:seconds) <br>e.g.<br> Export Archive Report <br> Export status: Incomplete <br> Processing aborted due to an unrecoverable error. <br> Job Id: Exp3_20041414431943 <br> Archive Name: Dowd, Elwood<br> Vault Id: 5UTRLEW061FE5424A863424CFE79589991110000acme.com <br> Target PST file location: D:\PST Export\Dowd,Elwood_Export_0001.pst <br> Number of PST files: 1 <br> Number of items restored: 0 <br> Number of items unable to be restored: 1<br> Age range filter: <None> <br> Retention category filter: <None> <br> Elapsed Export Time: 00:00:05 (hours:minutes:seconds)

The Clip cannot be deleted from the EMC Centera Server. Pool Address: %1 Clip-Id: %2 VaultStoreId: %3 VaultId: %4 SavesetId: %5 This can be caused by the Clip Retention period or because the Centera does not allow deletes to be performed. <br />e.g.<br />The Clip cannot be deleted from the EMC Centera Server. <br />Pool Address: 127.13.17.13<br />Clip-Id: 3NMK8VSBGFOERe4LGVFV8V6BA5MG60VRFCN700000000000000000<br />VaultStoreId: 12FTR563123D88748849605BB6359FBB41210000vault.acme.com <br />VaultId: 414123120C102F041A2AA756D994B8D4E1110000vault.acme.com <br />SavesetId: 152000000000000~200401071644180000~0~BBB164935DB140AFBC5244C49865726 <br />This can be caused by the Clip Retention period or because the Centera does not allow deletes to be performed.

A COM exception has been raised. %1 Internal reference %2 An exception is raised when a process encounters an unexpected fault. Contact your support representative with details of this and any preceding errors. <br>e.g.<br> A COM exception has been raised. <br> The SQL database server detected a deadlock while accessing the Vault Database '' <br>Description: Additional Microsoft supplied information: Source: Number: SQL State: Native Error: HRESULT SQL Command: [0xc0043433] Internal reference VaultStoreDB.cpp (CVaultStoreDB::GetNextSafeUniqueNumber) [lines {1994,2016,2019,2020,2021,2024}] built May 20 16:28:38 2004 <br> An exception is raised when a process encounters an unexpected fault. Contact your support representative with details of this and any preceding errors.

<p>Unable to complete archive request Reason: %1 Vault: %2 Vault Id: %3 Item: %4 Item Id: %5 Reference: %6 Supplementary Info: %7 </p> <p>e.g.</p> <p>Unable to complete archive request<br /><br />Reason: Item cannot be archived. Several attempts to archive the item have failed or been interrupted. To prevent further failures the item should not be presented for archival again. [0xc00419bb]<br />Vault: Misc<br />Vault Id: 1S4A45111C30D4944B86F75044F1999291110000ACME<br />Item: Saveset Message for Mailbox /o=ACME /ou=zko/cn=Recipients/cn=DowdP, Message titled: Six foot white rabbits<br /></p>Unable to complete retrieval request Reason: %1 Vault: %2 Vault Id: %3 Item Id: %4 Reference: %5 Suplementary Info: %6 %7 <br>e.g.<br> Unable to complete retrieval request <br> Reason: The parameter is incorrect. [0x80070057] <br> Vault: Elwood P Dowd Vault Id: 14123R5C6A87D544CB21A585D9047C2F71110000acme Item Id: 14123R5C6A87D544CB21A585D9047C2F71110000acme+300120000000000~200204110843120000~0~CEB18767AC5242B7A0D1D9DA18D5695+0++1321+2+38229.601894444444+86+702 Reference: LMI/rs Suplementary Info: EnterpriseVault.Collector Id: 1321

Unable to update Vault Store Partition record. Partition : %2 Destination : %3 Internal references: Flags : %4 Error : %1 Reference : %5 <br>e.g.<br> Unable to update Vault Store Partition record.<br> Partition : 4JF8RKDSU7453LDPQ348A590E78088278071q10000kvault.acme.com<br> Destination : Internal references:<br> Flags : <br> Error : EMC Centera Collection cannot be disabled until all uncollected Savesets have been collected. If the Storage Service is not running start it and try again later. If the Storage Service is running try again later. [0xc0041af9]<br> Reference : StorageManage.cpp (CStorageManage::EMCCenteraDisableCollection) [lines {...,2967,2968,2977,2978,2982,2986,2987,2988,2998,3013,3017,3019}] built Feb 13 18:34:42 2004

Update of Archive Index with Storage transactions from %5 to %6 suspended whilst processing transaction number %7 during archive conversion Archive: %2 Archive Id: %1 Vault Store: %3 Vault Store Id: %4 Elapsed Time: %8 (hours:minutes:seconds) Number of index additions replayed: %9 Number of index deletions replayed: %10 NOTE: The total number of index additions and deletions replayed may be less than the number of transactions processed. This is because the index update process is optimized so that index additions are not replayed for items that are known to have been fully deleted from the Vault. Number of archived items with an old version of the common index elements: %11 NOTE: Index additions used the common index elements stored in the archived item. Items with old versions of the common index elements may not be indexed with the same level of functionality as items archived using the latest version of the common index elements.

<p>A Collector encountered an error attempting to migrate Collection file %2 to %3. The Collector will abandon migration for the current run. Migration attempts will continue during future runs. Reason: %1 PartitionEntryID: %4 Secondary Storage Location: %5 Method: %6 (%7) </p> <p>e.g.</p> <p>A Collector encountered an error attempting to migrate Collection file E:\Enterprise Vault Stores\EXUSNY1 Ptn11\1999\01\02\Collection59766.CAB to F:\US\VAULT_STORES\EXUSNY1\Partition 11 migration\FB933F8AE14B4C4E9593C9212886AB36\1999\01\02\Collection59766.CAB. The Collector will abandon migration for the current run. Migration attempts will continue during future runs. </p> <p>Reason: The system cannot find the path specified. [0x80070003] </p> <p>PartitionEntryID: 1FB933F8AE14B4C4E9593C9212886AB361q10000ACME-NY </p> <p>Secondary Storage Location: F:\US\VAULT_STORES\EXUSNY1\Partition 11 migration </p> <p><font size="1"><font size="3">Method: CMigrator::SendFile (SF/CD/F:\US\VAULT_STORES\EXUSNY1\Partition 11 migration\FB933F8AE14B4C4E9593C9212886AB36)</font> </font></p>

The Access Control List of the archive/folder identified by %1 has been truncated because its length exceeded the maximum. Number of present Access Control Entries: %2 Number of truncated Access Control Entries: %3<br />e.g.<br />The Access Control List of the archive/folder identified by '140E5472153C07F4E9B91B53658461E1B1110000EV1.acme.com' has been truncated because its length exceeded the maximum.<br /><br />Number of present Access Control Entries: 1820<br />Number of truncated Access Control Entries: 34707<br /><br />For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp<br /><br /><br />

<p>A EMC Centera Collector thread encountered an error and has stopped. Reason: %1 PartitionEntryID: %2 Method: %3 </p> <p>e.g.</p> <p><font face="Courier New"><font size="4"><font face="Times New Roman, Times, serif"><span class="FIXEDFONT">A EMC Centera Collector thread encountered an error and has stopped.</span><br /></font><tt><span class="FIXEDFONT"><font face="Times New Roman, Times, serif">Reason: Not enough storage is available to complete this operation. &nbsp;[0x8007000e]</font>&nbsp;&nbsp;</span></tt></font></font></p>

The MigratorServer cannot start because the required version of MAPI is missing or incorrectly configured on the Enterprise Vault server: To resolve the problem: 1. Stop all Enterprise Vault services and processes that are using MAPI. 2. Ensure that a version of MAPI supplied with Microsoft Outlook 2003 or later is installed and correctly configured on the Enterprise Vault server. 3. Restart the Enterprise Vault services. If the problem persists, see the "Troubleshooting" section of the Enterprise Vault Administration help file for guidelines on how to proceed. For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp

Storage Expiry Report Vault Store Name: %1 Vault Store Id: %2 Number of vaults processed: %3 Number of vaults enabled for expiry: %4 Total number of expired items deleted: %5 Total number of items that could not be deleted: %6 Items marked with sent\received date based retention categories have been deleted: %9 Items marked with archived date based retention categories have been deleted: %10 Start Time: %7 End Time: %8 For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp

<p>Failed to add item to the index due to failure loading the item's index metadata. Reason: %1 Index Id: %2 Saveset Id: %3 Internal reference: %4 For more information, see Help and Support Center at <a href="http://evevent.veritas.com/rosetta/showevent.asp">http://evevent.veritas.com/rosetta/showevent.asp</a> </p> <p>e.g.&nbsp; Failed to add item to the index due to failure loading the item's index metadata. |Reason: No such interface supported [0x80004002] |Index Id: 213D931093CC94A429D26CADD47E332CA1110000ACME/Volume:7 (MailboxAliasName) |Saveset Id: 128412000000000~200401071308210000~0~138DA8FD60624EB693BA9F1FCC9A22C |Internal reference: XML II load |<br /></p>

<p>Unable to add the item to the index since it is not currently available from the Storage Service. Reason: %1 Attempt: %2 Index: %3 Saveset Id: %4 Sequence Number: %5 For more information, see Help and Support Center at <a href="http://evevent.veritas.com/rosetta/showevent.asp">http://evevent.veritas.com/rosetta/showevent.asp</a> </p><font size="1"> <p><font size="2">Unable to add the item to the index since it is not currently available from the Storage Service.</font></p> <p><font size="2">Reason: Saveset is temporarily unavailable. Try operation again later. [0x80041b03]</font></p> <p><font size="2">Attempt: 7</font></p> <p><font size="2">Index: 1R4WKFIR5S9A7D74E9344C1942C220A2B111000ACME/Volume:1 (JOURNALVAULT)</font></p> <p><font size="2">Saveset Id: 41D5A0000000000~200305102205190000~0~42025941687F4C16A058C95C64CB495</font></p> <p><font size="2">Sequence Number: 607122</font></p></font>

The Enterprise Vault Domino Server '%1' could not be contacted. It has been removed from the list of active servers for domain '%s2'. Ensure that this server can be reached over the network and is operating correctly. The server will be added to the active list shortly after connectivity is restored, or when the Domino server is restarted. If necessary you can increase the connection failure limit by setting the EVDomSvrMaxFailures registry value. See the documentation for further details. For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp

An error was detected while accessing the Vault Database '%2' (Internal reference: %3), error code <%1>. SQL Command: %4 <br>e.g.<br> An error was detected while accessing the Vault Database 'EVSales' (Internal reference: ADODataAccess.cpp (CADODataAccess::AddRecord) [lines {336,337}] built Jul 7 11:45:12 2004), error code <0x80040e14>.<br> SQL Command:<br> INSERT INTO Saveset (ArchivePointIdentity,ArchivedDate,IdChecksumHigh,IdChecksumLow,IdDateTime,IdPartition,IdTransaction,IdUniqueNo,IndexSeqNo,ItemSize,RetentionCategoryIdentity,VaultIdentity ) VALUES ( 51,GETDATE(),1922000,0,CONVERT(datetime,'20030827 19:54:37:000',121),6,'30294952-1791-417D-BDE6-290BB3283590',0,238849,26,4,58)

An error was detected while accessing the Vault Database '%2' (Internal reference: %7): Description: %1 SQL Command: %8 Additional Microsoft supplied information: Source: %3 Number: %4 SQL State: %5 Native Error: %6 <br>e.g.<br> An error was detected while accessing the Vault Database 'EVStore1' (Internal reference: ADODataAccess.cpp (CADODataAccess::ExecuteSQLCommand) [lines {1085,1087,1090,1132,1133,1148}] built Dec 9 17:50:56 2003): Description: [Microsoft][ODBC SQL Server Driver][SQL Server]Could not allocate space for object 'JournalArchive' in database 'EVStore1' because the 'PRIMARY' filegroup is full.

e.g.<br> An error was detected while accessing the Vault Database 'EnterpriseVaultDirectory'. If multiple instances of SQL Server exist ensure the correct instance was specified (Internal reference: CC1): <br> Description: [Microsoft][ODBC SQL Server Driver][Shared Memory]SQL Server does not exist or access denied.<br> SQL Command: N/A <br> Additional Microsoft supplied information:<br> Source: Microsoft OLE DB Provider for ODBC Drivers<br> Number: 0x80004005 <br> SQL State: 08001 <br> Native Error: 00000017 <br> HRESULT 0xc0043433<br>

The SPS service cannot start because the required version of MAPI is missing or incorrectly configured on the Enterprise Vault server: To resolve the problem: 1. Stop all Enterprise Vault services and processes that are using MAPI. 2. Ensure that a version of MAPI supplied with Microsoft Outlook 2003 or later is installed and correctly configured on the Enterprise Vault server. 3. Restart the Enterprise Vault services. If the problem persists, see the "Troubleshooting" section of the Enterprise Vault Administration help file for guidelines on how to proceed. For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp

The File Server Archive Manager cannot start because the required version of MAPI is missing or incorrectly configured on the Enterprise Vault server:\n\nTo resolve the problem:\n\n1. Stop all Enterprise Vault services and processes that are using MAPI.\n2. Ensure that a version of MAPI supplied with Microsoft Outlook 2003 or later is installed and correctly configured on the Enterprise Vault server.\n3. Restart the Enterprise Vault services.If the problem persists, see the "Troubleshooting" section of the Enterprise Vault Administration help file for guidelines on how to proceed.

{0}The Exchange provisioning task found a mailbox with duplicate entries in the Enterprise Vault database, and automatically removed the duplicates. The default Vault ID of the most recent entry has been selected for this mailbox.\n\nSome PST files were associated with one or more of the deleted entries. You may need to amend the database to associate the PST files with the new entry for this mailbox - contact support if required.\n\nThe mailbox is not currently enabled for client-side PST migration. You may wish to review this setting to confirm whether it is correct.\n\nTask: {1}\n\nDomain: {2}\n\nMailbox: {3}\n\nEntryID: {4}\n\nDefault Vault ID: {5}\n\nDuplicate entries removed: {6}\n\nAssociated default Vault IDs: {7}

<p>There was an error processing an item in a mailbox. The task will process the item again on the next archiving run. Task: {0} Mailbox: {1} NoteID: {2} Subject: {3} Error: {4} Trace: {5} </p> <p>e.g.</p> <p>There was an error processing an item in a mailbox. The task will process the <br />item again on the next archiving run.</p> <p>Task: Domino Mailbox Archiving Task</p> <p>Mailbox: 'SERVER/ACME1!!mail\dowd'-CN=Elwood <a href="mailto:Dowd/O=ACME1@MYDOMAIN">Dowd/O=ACME1@MYDOMAIN</a></p> <p>NoteID: 110e</p> <p>Subject: &lt;unavailable&gt;</p> <p>Error: Error(3637): Unable to open note 110e - Cannot convert MIME message to <br />Notes Rich Text message.</p> <p>Trace:&nbsp;&nbsp;&nbsp; at DomNote.Open()<br />&nbsp;&nbsp; at LotusDominoMailboxArchivingTask.BaseQItem.OpenNote()<br />&nbsp;&nbsp; at LotusDominoMailboxArchivingTask.ArchiveQItem.Process()</p> <p></p>

Move archive has detected an error occurred when the items in the destination archive were being verified following a backup.\nThe maximum retry threshold has been reached and Archive moves will no longer attempt to re-copy any further items.\n\nPlease check the event log on the Enterprise Vault server where the destination archive is located.\nPlease check the Move archive log file on the Enterprise Vault server where the source archive is located.\n\nThe move archive documentation contains more information about setting the threshold for the maximum number of retries.\n\nSource archive: {0}\n\nDestination archive: {1}\n\nDestination Vault Store: {2}

This is an example. Details may be quite different.<p> A queued operation exceeded the retry count and has been discarded<p> Enterprise Vault Journaling Service for ACMEEXCH1<p> m_pIBackgroundArchivingAgent->ProcessItem(Priority = "true",<br> ExchangeSystem = "ACMEEXCH1",<br> m_pILocation,<br> (ULONG)EntryIdSize = 70,<br> EntryId,<br> ArchiveId = "1828E94DA5D483744B6E82329221A153A1110000huyton.zko.acme.com",<br> RetentionCategory= "181667B5FEBDAD3119CAB00508B070AE51b10000huyton.zko.acme.com",<br> UserMailboxDn = "/o=ACME/ou=EENGINEERING/cn=Servers/cn=stewart-journal",<br> MessageTitle = "Tax Return",<br> nRetryCount = 3,<br> NULL,<br> CallerSID,<br> isAReArchive = 0, ArchiveTransId = "5E24F8CD11B14E60A60A8443859FF7F", IndexedPropertiesSet = "");<p> HRESULT: 0x80070057 %2

The IRestorationAgent->RestoreItem() function failed whilst processing the item with TransactionID: %1, SavesetID: %2 Number of retries: %3 The retrieval request has failed because the associated Saveset could not be found on the spool queue. The retrieval request will now be discarded It is possible that the Saveset has been removed from the spool queue because it has not been received in time. <br>e.g.<br> The IRestorationAgent->RestoreItem() function failed whilst processing the item with TransactionID: 5123104F6ADC42AAB41C617FFE1A3FE, SavesetID: 101310000000000~200304180803140000~0~5303A7CBB67642ACAB2B555CEB49ED7 <br>Number of retries: 30 <br> The retrieval request has failed because the associated Saveset could not be found on the spool queue. The retrieval request will now be discarded <br> It is possible that the Saveset has been removed from the spool queue because it has not been received in time.

The task controller cannot start the following MAPI-dependent tasks because the required version of MAPI is missing or incorrectly configured on the Enterprise Vault server: %1 To resolve the problem: 1. Stop all Enterprise Vault services and processes that are using MAPI. 2. Ensure that a version of MAPI supplied with Microsoft Outlook 2003 or later is installed and correctly configured on the Enterprise Vault server. 3. Restart the Enterprise Vault services. If the problem persists, see the "Troubleshooting" section of the Enterprise Vault Administration help file for guidelines on how to proceed. For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp

Mailbox Report Date: %1 System Name: %2 Mailbox Name: %3 Associated Account: %13 Policy: %28 Mailbox State: %20 Mailbox Quota Limit: %14 KB Mailbox Quota Used: %15 KB Percentage of Mailbox Quota free: %16 Number of archivable items in mailbox: %4 Total size of archivable items in mailbox: %5 KB Number of archivable folders in mailbox: %6 Number of items ready to archive: %7 Total size of items ready to archive: %8 KB Number of items that would be archived: %9 Total size of items that would be archived: %10 KB Number of expired shortcuts that would be deleted: %17 Number of orphaned shortcuts that would be deleted: %18 Number of old shortcuts that would be deleted: %19 Start Time: %11 End Time: %12 For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp Public Folder Report Date: %1 System Name: %2 Public Folder start point: %3 Policy: %23 Number of archivable items (from start point): %4 Total size of archivable items (from start point): %5 KB Number of folders processed: %6 Number of items ready to archive: %7 Total size of items ready to archive: %8 KB Number of items that would be archived: %9 Total size of items that would be archived: %10 KB Number of expired shortcuts that would be deleted: %13 Number of orphaned shortcuts that would be deleted: %14 Number of old shortcuts that would be deleted: %15 Start Time: %11 End Time: %12 For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp

Could not update shortcut. The archiving task cannot process one or more shortcuts to items that have been migrated from Domino. The RestoreShortcutBody registry value is set. This registry value makes the archiving task rebuild Enterprise Vault shortcuts for Exchange Server messages and shortcuts to items that have been migrated from Domino. The archiving task cannot initialize the Lotus Notes runtime in order to process items that have been migrated from Domino. Check that Lotus Notes is correctly installed on the server that is running the archiving task. Exchange Server shortcuts can be processed correctly. For more information, see Help and Support Center at http://evevent.symantec.com/rosetta/showevent.asp

The %1 service failed to respond to the STOP request in a timely manner. This may be due to the service getting insufficient CPU time; check subsequent event log entries for a "successfully stopped" message. If the service is still running, manually stop the service and check the event log for any errors logged by the service. <br>e.g.<br> The Enterprise Vault Archiving Service for ACMEEXCH1 service failed to respond to the STOP request in a timely manner. This may be due to the service getting insufficient CPU time; check subsequent event log entries for a "successfully stopped" message. If the service is still running, manually stop the service and check the event log for any errors logged by the service.

The Shopping Service cannot perform the requested MAPI dependent operation because the required version of MAPI is missing or incorrectly configured on the Enterprise Vault server: To resolve the problem: 1. Stop all Enterprise Vault services and processes that are using MAPI. 2. Ensure that a version of MAPI supplied with Microsoft Outlook 2003 or later is installed and correctly configured on the Enterprise Vault server. 3. Restart the Enterprise Vault services. If the problem persists, see the "Troubleshooting" section of the Enterprise Vault Administration help file for guidelines on how to proceed. For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp

Item archive abandoning Message Id: %1 Label: %2 All previous attempts to archive the item have failed or been interrupted. To prevent further failures the item will not be archived. It is probable that the item will remain as 'pending archive' in the user's mailbox. <br>e.g.<br> Item archive abandoning <br> Message Id: {484HFDSY-743B-4410-8D1C-JF6064709ABE}\9543830 <br> Label: Saveset Message for Mailbox /o=ACME/ou=Messaging Administrative Group/cn=Recipients/cn=DowdP, Message titled: MessageTitle <br> All previous attempts to archive the item have failed or been interrupted. To prevent further failures the item will not be archived. It is probable that the item will remain as 'pending archive' in the user's mailbox.

e.g.<br> Storage Expiry Report <p> Vault Store Name: Vault Store 5 <br> Vault Store Id: 108059CA5FF8E724187568F7C863FCA6F1210000acme.kvsvault.com <p> Number of vaults processed: 7 <br> Number of vaults enabled for expiry: 7 <br> Total number of expired items deleted: 0 <br> <p> Items were deleted with the following retention categories: (none) <p> No items were deleted with the following retention categories: <br> PST (119988 months). Miscellaneous (12 months). Public (119988 months). Business (119988 months). Uncategorized (9999 years). Sent Items (119988 months). Deleted Items (3 months). Personal (60 months). <p> Expiry based on archived date <p> Start Time: 15/02/2004 12:00 <br> End Time: 15/02/2004 12:00

Update of Vault Index with Storage transactions %5 to %6 suspended whilst processing transaction number %7 Vault: %2 Vault Id: %1 Vault Store: %3 Vault Store Id: %4 Elapsed Time: %8 (hours:minutes:seconds) Number of index additions replayed: %9 Number of index deletions replayed: %10 NOTE: The total number of index additions and deletions replayed may be less than the number of transactions processed. This is because the index update process is optimized so that index additions are not replayed for items that are known to have been fully deleted from the Vault. Number of archived items with an old version of the common index elements: %11 Number of archived items updated with the latest version of the common index elements: %12 NOTE: Index additions were performed using the latest version of the common index elements stored in the archived item. Where necessary the archived item was updated with the latest version of the common index elements.

EMC Centera C-Clip contains incorrect Saveset Pool Address: %1 ClipId: %2 Expected: VaultStoreId: %3 VaultId: %4 SavesetId: %5 Received: VaultStoreId: %6 VaultId: %7 SavesetId: %8 <br>e.g.<br> EMC Centera C-Clip contains incorrect Saveset <br> Pool Address: 10.28.0.11,10.28.0.12,10.28.0.13,10.48.0.14 <br> ClipId: 543rt642IULOHeAFGKEQCSHP7OC <br> Expected: <br> VaultStoreId: 54RG67UIFF82E2F409375B900DEE0EB0A1210000ACMEVAULT <br> VaultId: 554FG6E37395ED94FAC9B99FDA89A0AB41110000ACMEVAULT<br> SavesetId: 219000000000000~200302040749290000~0~T5R43297FC0E4ACB961D6F17D06FB30 <br> Received: <br> VaultStoreId: 54RG67UIFF82E2F409375B900DEE0EB0A1210000ACMEVAULT <br> VaultId: &#53588;ñ&#7924;&#27075;&#53356;ñ&#27056;&#406; <br> SavesetId: 219000000000000~200302040749290000~0~T5R43297FC0E4ACB961D6F17D06FB30 <br>

Export Archive Report Export status: %1 Job Id: %2 Vault Name: %3 Vault Id: %4 Target Exchange Server\Mailbox: %5 Number of items restored: %6 Number of items unable to be restored: %7 Age range filter: %8 Retention category filter: %9 Elapsed Export Time: %10 (hours:minutes:seconds) <br>e.g.<br> Export Archive Report <BR> Export status: Completed <BR> Job Id: Exp1_20040621132529 <BR> Vault Name: Dowd, Elwood <BR> Vault Id: 14RT65322AD4FB4EA842C4106A2DA8401110000vault.acme.com<br> Target Exchange Server\Mailbox: ACMEEXCH1\Dowd, Elwood <br> Number of items restored: 321<br> Number of items unable to be restored: 2<br> Age range filter: (None) Retention category filter: (None) Elapsed Export Time: 00:04:18 (hours:minutes:seconds)

The Clip cannot be deleted from the EMC Centera Server. Pool Address: %1 Clip-Id: %2 VaultStoreId: %3 VaultId: %4 SavesetId: %5 This can be caused by the Clip Retention period or because the Centera does not allow deletes to be performed. <br />e.g.<br />The Clip cannot be deleted from the EMC Centera Server. <br />Pool Address: 127.13.17.13<br />Clip-Id: 3NMK8VSBGFOERe4LGVFV8V6BA5MG60VRFCN700000000000000000<br />VaultStoreId: 12FTR563123D88748849605BB6359FBB41210000vault.acme.com <br />VaultId: 414123120C102F041A2AA756D994B8D4E1110000vault.acme.com <br />SavesetId: 152000000000000~200401071644180000~0~BBB164935DB140AFBC5244C49865726 <br />This can be caused by the Clip Retention period or because the Centera does not allow deletes to be performed.

A COM exception has been raised. %1 Internal reference %2 An exception is raised when a process encounters an unexpected fault. Contact your support representative with details of this and any preceding errors. <br>e.g.<br> A COM exception has been raised. <br> The SQL database server detected a deadlock while accessing the Vault Database '' <br>Description: Additional Microsoft supplied information: Source: Number: SQL State: Native Error: HRESULT SQL Command: [0xc0043433] Internal reference VaultStoreDB.cpp (CVaultStoreDB::GetNextSafeUniqueNumber) [lines {1994,2016,2019,2020,2021,2024}] built May 20 16:28:38 2004 <br> An exception is raised when a process encounters an unexpected fault. Contact your support representative with details of this and any preceding errors.

Unable to update Vault Store Partition record. Partition : %2 Destination : %3 Internal references: Flags : %4 Error : %1 Reference : %5 <br>e.g.<br> Unable to update Vault Store Partition record.<br> Partition : 4JF8RKDSU7453LDPQ348A590E78088278071q10000kvault.acme.com<br> Destination : Internal references:<br> Flags : <br> Error : EMC Centera Collection cannot be disabled until all uncollected Savesets have been collected. If the Storage Service is not running start it and try again later. If the Storage Service is running try again later. [0xc0041af9]<br> Reference : StorageManage.cpp (CStorageManage::EMCCenteraDisableCollection) [lines {...,2967,2968,2977,2978,2982,2986,2987,2988,2998,3013,3017,3019}] built Feb 13 18:34:42 2004

Update of Archive Index with Storage transactions from %5 to %6 suspended whilst processing transaction number %7 during archive conversion Archive: %2 Archive Id: %1 Vault Store: %3 Vault Store Id: %4 Elapsed Time: %8 (hours:minutes:seconds) Number of index additions replayed: %9 Number of index deletions replayed: %10 NOTE: The total number of index additions and deletions replayed may be less than the number of transactions processed. This is because the index update process is optimized so that index additions are not replayed for items that are known to have been fully deleted from the Vault. Number of archived items with an old version of the common index elements: %11 NOTE: Index additions used the common index elements stored in the archived item. Items with old versions of the common index elements may not be indexed with the same level of functionality as items archived using the latest version of the common index elements.

<p>A Collector encountered an error attempting to migrate Collection file %2 to %3. The Collector will abandon migration for the current run. Migration attempts will continue during future runs. Reason: %1 PartitionEntryID: %4 Secondary Storage Location: %5 Method: %6 (%7) </p> <p>e.g.</p> <p>A Collector encountered an error attempting to migrate Collection file E:\Enterprise Vault Stores\EXUSNY1 Ptn11\1999\01\02\Collection59766.CAB to F:\US\VAULT_STORES\EXUSNY1\Partition 11 migration\FB933F8AE14B4C4E9593C9212886AB36\1999\01\02\Collection59766.CAB. The Collector will abandon migration for the current run. Migration attempts will continue during future runs. </p> <p>Reason: The system cannot find the path specified. [0x80070003] </p> <p>PartitionEntryID: 1FB933F8AE14B4C4E9593C9212886AB361q10000ACME-NY </p> <p>Secondary Storage Location: F:\US\VAULT_STORES\EXUSNY1\Partition 11 migration </p> <p><font size="1"><font size="3">Method: CMigrator::SendFile (SF/CD/F:\US\VAULT_STORES\EXUSNY1\Partition 11 migration\FB933F8AE14B4C4E9593C9212886AB36)</font> </font></p>

The Access Control List of the archive/folder identified by %1 has been truncated because its length exceeded the maximum. Number of present Access Control Entries: %2 Number of truncated Access Control Entries: %3<br />e.g.<br />The Access Control List of the archive/folder identified by '140E5472153C07F4E9B91B53658461E1B1110000EV1.acme.com' has been truncated because its length exceeded the maximum.<br /><br />Number of present Access Control Entries: 1820<br />Number of truncated Access Control Entries: 34707<br /><br />For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp<br /><br /><br />

The MigratorServer cannot start because the required version of MAPI is missing or incorrectly configured on the Enterprise Vault server: To resolve the problem: 1. Stop all Enterprise Vault services and processes that are using MAPI. 2. Ensure that a version of MAPI supplied with Microsoft Outlook 2003 or later is installed and correctly configured on the Enterprise Vault server. 3. Restart the Enterprise Vault services. If the problem persists, see the "Troubleshooting" section of the Enterprise Vault Administration help file for guidelines on how to proceed. For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp

<p>Failed to add item to the index due to failure loading the item's index metadata. Reason: %1 Index Id: %2 Saveset Id: %3 Internal reference: %4 For more information, see Help and Support Center at <a href="http://evevent.veritas.com/rosetta/showevent.asp">http://evevent.veritas.com/rosetta/showevent.asp</a> </p> <p>e.g.&nbsp; Failed to add item to the index due to failure loading the item's index metadata. |Reason: No such interface supported [0x80004002] |Index Id: 213D931093CC94A429D26CADD47E332CA1110000ACME/Volume:7 (MailboxAliasName) |Saveset Id: 128412000000000~200401071308210000~0~138DA8FD60624EB693BA9F1FCC9A22C |Internal reference: XML II load |<br /></p>

<p>Unable to add the item to the index since it is not currently available from the Storage Service. Reason: %1 Attempt: %2 Index: %3 Saveset Id: %4 Sequence Number: %5 For more information, see Help and Support Center at <a href="http://evevent.veritas.com/rosetta/showevent.asp">http://evevent.veritas.com/rosetta/showevent.asp</a> </p><font size="1"> <p><font size="2">Unable to add the item to the index since it is not currently available from the Storage Service.</font></p> <p><font size="2">Reason: Saveset is temporarily unavailable. Try operation again later. [0x80041b03]</font></p> <p><font size="2">Attempt: 7</font></p> <p><font size="2">Index: 1R4WKFIR5S9A7D74E9344C1942C220A2B111000ACME/Volume:1 (JOURNALVAULT)</font></p> <p><font size="2">Saveset Id: 41D5A0000000000~200305102205190000~0~42025941687F4C16A058C95C64CB495</font></p> <p><font size="2">Sequence Number: 607122</font></p></font>

An error was detected while accessing the Vault Database '%2' (Internal reference: %3), error code <%1>. SQL Command: %4 <br>e.g.<br> An error was detected while accessing the Vault Database 'EVSales' (Internal reference: ADODataAccess.cpp (CADODataAccess::AddRecord) [lines {336,337}] built Jul 7 11:45:12 2004), error code <0x80040e14>.<br> SQL Command:<br> INSERT INTO Saveset (ArchivePointIdentity,ArchivedDate,IdChecksumHigh,IdChecksumLow,IdDateTime,IdPartition,IdTransaction,IdUniqueNo,IndexSeqNo,ItemSize,RetentionCategoryIdentity,VaultIdentity ) VALUES ( 51,GETDATE(),1922000,0,CONVERT(datetime,'20030827 19:54:37:000',121),6,'30294952-1791-417D-BDE6-290BB3283590',0,238849,26,4,58)

{0}The Exchange provisioning task found a mailbox with duplicate entries in the Enterprise Vault database, and automatically removed the duplicates. The default Vault ID of the most recent entry has been selected for this mailbox.\n\nSome PST files were associated with one or more of the deleted entries. You may need to amend the database to associate the PST files with the new entry for this mailbox - contact support if required.\n\nThe mailbox is not currently enabled for client-side PST migration. You may wish to review this setting to confirm whether it is correct.\n\nTask: {1}\n\nDomain: {2}\n\nMailbox: {3}\n\nEntryID: {4}\n\nDefault Vault ID: {5}\n\nDuplicate entries removed: {6}\n\nAssociated default Vault IDs: {7}

<p>There was an error processing an item in a mailbox. The task will process the item again on the next archiving run. Task: {0} Mailbox: {1} NoteID: {2} Subject: {3} Error: {4} Trace: {5} </p> <p>e.g.</p> <p>There was an error processing an item in a mailbox. The task will process the <br />item again on the next archiving run.</p> <p>Task: Domino Mailbox Archiving Task</p> <p>Mailbox: 'SERVER/ACME1!!mail\dowd'-CN=Elwood <a href="mailto:Dowd/O=ACME1@MYDOMAIN">Dowd/O=ACME1@MYDOMAIN</a></p> <p>NoteID: 110e</p> <p>Subject: &lt;unavailable&gt;</p> <p>Error: Error(3637): Unable to open note 110e - Cannot convert MIME message to <br />Notes Rich Text message.</p> <p>Trace:&nbsp;&nbsp;&nbsp; at DomNote.Open()<br />&nbsp;&nbsp; at LotusDominoMailboxArchivingTask.BaseQItem.OpenNote()<br />&nbsp;&nbsp; at LotusDominoMailboxArchivingTask.ArchiveQItem.Process()</p> <p></p>

This is an example. Details may be quite different.<p> A queued operation exceeded the retry count and has been discarded<p> Enterprise Vault Journaling Service for ACMEEXCH1<p> m_pIBackgroundArchivingAgent->ProcessItem(Priority = "true",<br> ExchangeSystem = "ACMEEXCH1",<br> m_pILocation,<br> (ULONG)EntryIdSize = 70,<br> EntryId,<br> ArchiveId = "1828E94DA5D483744B6E82329221A153A1110000huyton.zko.acme.com",<br> RetentionCategory= "181667B5FEBDAD3119CAB00508B070AE51b10000huyton.zko.acme.com",<br> UserMailboxDn = "/o=ACME/ou=EENGINEERING/cn=Servers/cn=stewart-journal",<br> MessageTitle = "Tax Return",<br> nRetryCount = 3,<br> NULL,<br> CallerSID,<br> isAReArchive = 0, ArchiveTransId = "5E24F8CD11B14E60A60A8443859FF7F", IndexedPropertiesSet = "");<p> HRESULT: 0x80070057 %2

The IRestorationAgent->RestoreItem() function failed whilst processing the item with TransactionID: %1, SavesetID: %2 Number of retries: %3 The retrieval request has failed because the associated Saveset could not be found on the spool queue. The retrieval request will now be discarded It is possible that the Saveset has been removed from the spool queue because it has not been received in time. <br>e.g.<br> The IRestorationAgent->RestoreItem() function failed whilst processing the item with TransactionID: 5123104F6ADC42AAB41C617FFE1A3FE, SavesetID: 101310000000000~200304180803140000~0~5303A7CBB67642ACAB2B555CEB49ED7 <br>Number of retries: 30 <br> The retrieval request has failed because the associated Saveset could not be found on the spool queue. The retrieval request will now be discarded <br> It is possible that the Saveset has been removed from the spool queue because it has not been received in time.

Mailbox Report Date: %1 System Name: %2 Mailbox Name: %3 Associated Account: %13 Policy: %28 Mailbox State: %20 Mailbox Quota Limit: %14 KB Mailbox Quota Used: %15 KB Percentage of Mailbox Quota free: %16 Number of archivable items in mailbox: %4 Total size of archivable items in mailbox: %5 KB Number of archivable folders in mailbox: %6 Number of items ready to archive: %7 Total size of items ready to archive: %8 KB Number of items that would be archived: %9 Total size of items that would be archived: %10 KB Number of expired shortcuts that would be deleted: %17 Number of orphaned shortcuts that would be deleted: %18 Number of old shortcuts that would be deleted: %19 Start Time: %11 End Time: %12 For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp

Update of Vault Index with Storage transactions %5 to %6 suspended whilst processing transaction number %7 Vault: %2 Vault Id: %1 Vault Store: %3 Vault Store Id: %4 Elapsed Time: %8 (hours:minutes:seconds) Number of index additions replayed: %9 Number of index deletions replayed: %10 NOTE: The total number of index additions and deletions replayed may be less than the number of transactions processed. This is because the index update process is optimized so that index additions are not replayed for items that are known to have been fully deleted from the Vault. Number of archived items with an old version of the common index elements: %11 Number of archived items updated with the latest version of the common index elements: %12 NOTE: Index additions were performed using the latest version of the common index elements stored in the archived item. Where necessary the archived item was updated with the latest version of the common index elements.

EMC Centera C-Clip contains incorrect Saveset Pool Address: %1 ClipId: %2 Expected: VaultStoreId: %3 VaultId: %4 SavesetId: %5 Received: VaultStoreId: %6 VaultId: %7 SavesetId: %8 <br>e.g.<br> EMC Centera C-Clip contains incorrect Saveset <br> Pool Address: 10.28.0.11,10.28.0.12,10.28.0.13,10.48.0.14 <br> ClipId: 543rt642IULOHeAFGKEQCSHP7OC <br> Expected: <br> VaultStoreId: 54RG67UIFF82E2F409375B900DEE0EB0A1210000ACMEVAULT <br> VaultId: 554FG6E37395ED94FAC9B99FDA89A0AB41110000ACMEVAULT<br> SavesetId: 219000000000000~200302040749290000~0~T5R43297FC0E4ACB961D6F17D06FB30 <br> Received: <br> VaultStoreId: 54RG67UIFF82E2F409375B900DEE0EB0A1210000ACMEVAULT <br> VaultId: &#53588;ñ&#7924;&#27075;&#53356;ñ&#27056;&#406; <br> SavesetId: 219000000000000~200302040749290000~0~T5R43297FC0E4ACB961D6F17D06FB30 <br>

Export Archive Report Export status: %1 Job Id: %2 Vault Name: %3 Vault Id: %4 Target Exchange Server\Mailbox: %5 Number of items restored: %6 Number of items unable to be restored: %7 Age range filter: %8 Retention category filter: %9 Elapsed Export Time: %10 (hours:minutes:seconds) <br>e.g.<br> Export Archive Report <BR> Export status: Completed <BR> Job Id: Exp1_20040621132529 <BR> Vault Name: Dowd, Elwood <BR> Vault Id: 14RT65322AD4FB4EA842C4106A2DA8401110000vault.acme.com<br> Target Exchange Server\Mailbox: ACMEEXCH1\Dowd, Elwood <br> Number of items restored: 321<br> Number of items unable to be restored: 2<br> Age range filter: (None) Retention category filter: (None) Elapsed Export Time: 00:04:18 (hours:minutes:seconds)

The Clip cannot be deleted from the EMC Centera Server. Pool Address: %1 Clip-Id: %2 VaultStoreId: %3 VaultId: %4 SavesetId: %5 This can be caused by the Clip Retention period or because the Centera does not allow deletes to be performed. <br />e.g.<br />The Clip cannot be deleted from the EMC Centera Server. <br />Pool Address: 127.13.17.13<br />Clip-Id: 3NMK8VSBGFOERe4LGVFV8V6BA5MG60VRFCN700000000000000000<br />VaultStoreId: 12FTR563123D88748849605BB6359FBB41210000vault.acme.com <br />VaultId: 414123120C102F041A2AA756D994B8D4E1110000vault.acme.com <br />SavesetId: 152000000000000~200401071644180000~0~BBB164935DB140AFBC5244C49865726 <br />This can be caused by the Clip Retention period or because the Centera does not allow deletes to be performed.

A COM exception has been raised. %1 Internal reference %2 An exception is raised when a process encounters an unexpected fault. Contact your support representative with details of this and any preceding errors. <br>e.g.<br> A COM exception has been raised. <br> The SQL database server detected a deadlock while accessing the Vault Database '' <br>Description: Additional Microsoft supplied information: Source: Number: SQL State: Native Error: HRESULT SQL Command: [0xc0043433] Internal reference VaultStoreDB.cpp (CVaultStoreDB::GetNextSafeUniqueNumber) [lines {1994,2016,2019,2020,2021,2024}] built May 20 16:28:38 2004 <br> An exception is raised when a process encounters an unexpected fault. Contact your support representative with details of this and any preceding errors.

Unable to update Vault Store Partition record. Partition : %2 Destination : %3 Internal references: Flags : %4 Error : %1 Reference : %5 <br>e.g.<br> Unable to update Vault Store Partition record.<br> Partition : 4JF8RKDSU7453LDPQ348A590E78088278071q10000kvault.acme.com<br> Destination : Internal references:<br> Flags : <br> Error : EMC Centera Collection cannot be disabled until all uncollected Savesets have been collected. If the Storage Service is not running start it and try again later. If the Storage Service is running try again later. [0xc0041af9]<br> Reference : StorageManage.cpp (CStorageManage::EMCCenteraDisableCollection) [lines {...,2967,2968,2977,2978,2982,2986,2987,2988,2998,3013,3017,3019}] built Feb 13 18:34:42 2004

Update of Archive Index with Storage transactions from %5 to %6 suspended whilst processing transaction number %7 during archive conversion Archive: %2 Archive Id: %1 Vault Store: %3 Vault Store Id: %4 Elapsed Time: %8 (hours:minutes:seconds) Number of index additions replayed: %9 Number of index deletions replayed: %10 NOTE: The total number of index additions and deletions replayed may be less than the number of transactions processed. This is because the index update process is optimized so that index additions are not replayed for items that are known to have been fully deleted from the Vault. Number of archived items with an old version of the common index elements: %11 NOTE: Index additions used the common index elements stored in the archived item. Items with old versions of the common index elements may not be indexed with the same level of functionality as items archived using the latest version of the common index elements.

<p>A Collector encountered an error attempting to migrate Collection file %2 to %3. The Collector will abandon migration for the current run. Migration attempts will continue during future runs. Reason: %1 PartitionEntryID: %4 Secondary Storage Location: %5 Method: %6 (%7) </p> <p>e.g.</p> <p>A Collector encountered an error attempting to migrate Collection file E:\Enterprise Vault Stores\EXUSNY1 Ptn11\1999\01\02\Collection59766.CAB to F:\US\VAULT_STORES\EXUSNY1\Partition 11 migration\FB933F8AE14B4C4E9593C9212886AB36\1999\01\02\Collection59766.CAB. The Collector will abandon migration for the current run. Migration attempts will continue during future runs. </p> <p>Reason: The system cannot find the path specified. [0x80070003] </p> <p>PartitionEntryID: 1FB933F8AE14B4C4E9593C9212886AB361q10000ACME-NY </p> <p>Secondary Storage Location: F:\US\VAULT_STORES\EXUSNY1\Partition 11 migration </p> <p><font size="1"><font size="3">Method: CMigrator::SendFile (SF/CD/F:\US\VAULT_STORES\EXUSNY1\Partition 11 migration\FB933F8AE14B4C4E9593C9212886AB36)</font> </font></p>

<p>Unable to add the item to the index since it is not currently available from the Storage Service. Reason: %1 Attempt: %2 Index: %3 Saveset Id: %4 Sequence Number: %5 For more information, see Help and Support Center at <a href="http://evevent.veritas.com/rosetta/showevent.asp">http://evevent.veritas.com/rosetta/showevent.asp</a> </p><font size="1"> <p><font size="2">Unable to add the item to the index since it is not currently available from the Storage Service.</font></p> <p><font size="2">Reason: Saveset is temporarily unavailable. Try operation again later. [0x80041b03]</font></p> <p><font size="2">Attempt: 7</font></p> <p><font size="2">Index: 1R4WKFIR5S9A7D74E9344C1942C220A2B111000ACME/Volume:1 (JOURNALVAULT)</font></p> <p><font size="2">Saveset Id: 41D5A0000000000~200305102205190000~0~42025941687F4C16A058C95C64CB495</font></p> <p><font size="2">Sequence Number: 607122</font></p></font>

<p>There was an error processing an item in a mailbox. The task will process the item again on the next archiving run. Task: {0} Mailbox: {1} NoteID: {2} Subject: {3} Error: {4} Trace: {5} </p> <p>e.g.</p> <p>There was an error processing an item in a mailbox. The task will process the <br />item again on the next archiving run.</p> <p>Task: Domino Mailbox Archiving Task</p> <p>Mailbox: 'SERVER/ACME1!!mail\dowd'-CN=Elwood <a href="mailto:Dowd/O=ACME1@MYDOMAIN">Dowd/O=ACME1@MYDOMAIN</a></p> <p>NoteID: 110e</p> <p>Subject: &lt;unavailable&gt;</p> <p>Error: Error(3637): Unable to open note 110e - Cannot convert MIME message to <br />Notes Rich Text message.</p> <p>Trace:&nbsp;&nbsp;&nbsp; at DomNote.Open()<br />&nbsp;&nbsp; at LotusDominoMailboxArchivingTask.BaseQItem.OpenNote()<br />&nbsp;&nbsp; at LotusDominoMailboxArchivingTask.ArchiveQItem.Process()</p> <p></p>

The IRestorationAgent->RestoreItem() function failed whilst processing the item with TransactionID: %1, SavesetID: %2 Number of retries: %3 The retrieval request has failed because the associated Saveset could not be found on the spool queue. The retrieval request will now be discarded It is possible that the Saveset has been removed from the spool queue because it has not been received in time. <br>e.g.<br> The IRestorationAgent->RestoreItem() function failed whilst processing the item with TransactionID: 5123104F6ADC42AAB41C617FFE1A3FE, SavesetID: 101310000000000~200304180803140000~0~5303A7CBB67642ACAB2B555CEB49ED7 <br>Number of retries: 30 <br> The retrieval request has failed because the associated Saveset could not be found on the spool queue. The retrieval request will now be discarded <br> It is possible that the Saveset has been removed from the spool queue because it has not been received in time.

Mailbox Report Date: %1 System Name: %2 Mailbox Name: %3 Associated Account: %13 Policy: %28 Mailbox State: %20 Mailbox Quota Limit: %14 KB Mailbox Quota Used: %15 KB Percentage of Mailbox Quota free: %16 Number of archivable items in mailbox: %4 Total size of archivable items in mailbox: %5 KB Number of archivable folders in mailbox: %6 Number of items ready to archive: %7 Total size of items ready to archive: %8 KB Number of items that would be archived: %9 Total size of items that would be archived: %10 KB Number of expired shortcuts that would be deleted: %17 Number of orphaned shortcuts that would be deleted: %18 Number of old shortcuts that would be deleted: %19 Start Time: %11 End Time: %12 For more information, see Help and Support Center at http://evevent.veritas.com/rosetta/showevent.asp

Update of Vault Index with Storage transactions %5 to %6 suspended whilst processing transaction number %7 Vault: %2 Vault Id: %1 Vault Store: %3 Vault Store Id: %4 Elapsed Time: %8 (hours:minutes:seconds) Number of index additions replayed: %9 Number of index deletions replayed: %10 NOTE: The total number of index additions and deletions replayed may be less than the number of transactions processed. This is because the index update process is optimized so that index additions are not replayed for items that are known to have been fully deleted from the Vault. Number of archived items with an old version of the common index elements: %11 Number of archived items updated with the latest version of the common index elements: %12 NOTE: Index additions were performed using the latest version of the common index elements stored in the archived item. Where necessary the archived item was updated with the latest version of the common index elements.

EMC Centera C-Clip contains incorrect Saveset Pool Address: %1 ClipId: %2 Expected: VaultStoreId: %3 VaultId: %4 SavesetId: %5 Received: VaultStoreId: %6 VaultId: %7 SavesetId: %8 <br>e.g.<br> EMC Centera C-Clip contains incorrect Saveset <br> Pool Address: 10.28.0.11,10.28.0.12,10.28.0.13,10.48.0.14 <br> ClipId: 543rt642IULOHeAFGKEQCSHP7OC <br> Expected: <br> VaultStoreId: 54RG67UIFF82E2F409375B900DEE0EB0A1210000ACMEVAULT <br> VaultId: 554FG6E37395ED94FAC9B99FDA89A0AB41110000ACMEVAULT<br> SavesetId: 219000000000000~200302040749290000~0~T5R43297FC0E4ACB961D6F17D06FB30 <br> Received: <br> VaultStoreId: 54RG67UIFF82E2F409375B900DEE0EB0A1210000ACMEVAULT <br> VaultId: &#53588;ñ&#7924;&#27075;&#53356;ñ&#27056;&#406; <br> SavesetId: 219000000000000~200302040749290000~0~T5R43297FC0E4ACB961D6F17D06FB30 <br>

Update of Archive Index with Storage transactions from %5 to %6 suspended whilst processing transaction number %7 during archive conversion Archive: %2 Archive Id: %1 Vault Store: %3 Vault Store Id: %4 Elapsed Time: %8 (hours:minutes:seconds) Number of index additions replayed: %9 Number of index deletions replayed: %10 NOTE: The total number of index additions and deletions replayed may be less than the number of transactions processed. This is because the index update process is optimized so that index additions are not replayed for items that are known to have been fully deleted from the Vault. Number of archived items with an old version of the common index elements: %11 NOTE: Index additions used the common index elements stored in the archived item. Items with old versions of the common index elements may not be indexed with the same level of functionality as items archived using the latest version of the common index elements.

<p>A Collector encountered an error attempting to migrate Collection file %2 to %3. The Collector will abandon migration for the current run. Migration attempts will continue during future runs. Reason: %1 PartitionEntryID: %4 Secondary Storage Location: %5 Method: %6 (%7) </p> <p>e.g.</p> <p>A Collector encountered an error attempting to migrate Collection file E:\Enterprise Vault Stores\EXUSNY1 Ptn11\1999\01\02\Collection59766.CAB to F:\US\VAULT_STORES\EXUSNY1\Partition 11 migration\FB933F8AE14B4C4E9593C9212886AB36\1999\01\02\Collection59766.CAB. The Collector will abandon migration for the current run. Migration attempts will continue during future runs. </p> <p>Reason: The system cannot find the path specified. [0x80070003] </p> <p>PartitionEntryID: 1FB933F8AE14B4C4E9593C9212886AB361q10000ACME-NY </p> <p>Secondary Storage Location: F:\US\VAULT_STORES\EXUSNY1\Partition 11 migration </p> <p><font size="1"><font size="3">Method: CMigrator::SendFile (SF/CD/F:\US\VAULT_STORES\EXUSNY1\Partition 11 migration\FB933F8AE14B4C4E9593C9212886AB36)</font> </font></p>

<p>Unable to add the item to the index since it is not currently available from the Storage Service. Reason: %1 Attempt: %2 Index: %3 Saveset Id: %4 Sequence Number: %5 For more information, see Help and Support Center at <a href="http://evevent.veritas.com/rosetta/showevent.asp">http://evevent.veritas.com/rosetta/showevent.asp</a> </p><font size="1"> <p><font size="2">Unable to add the item to the index since it is not currently available from the Storage Service.</font></p> <p><font size="2">Reason: Saveset is temporarily unavailable. Try operation again later. [0x80041b03]</font></p> <p><font size="2">Attempt: 7</font></p> <p><font size="2">Index: 1R4WKFIR5S9A7D74E9344C1942C220A2B111000ACME/Volume:1 (JOURNALVAULT)</font></p> <p><font size="2">Saveset Id: 41D5A0000000000~200305102205190000~0~42025941687F4C16A058C95C64CB495</font></p> <p><font size="2">Sequence Number: 607122</font></p></font>

<p>There was an error processing an item in a mailbox. The task will process the item again on the next archiving run. Task: {0} Mailbox: {1} NoteID: {2} Subject: {3} Error: {4} Trace: {5} </p> <p>e.g.</p> <p>There was an error processing an item in a mailbox. The task will process the <br />item again on the next archiving run.</p> <p>Task: Domino Mailbox Archiving Task</p> <p>Mailbox: 'SERVER/ACME1!!mail\dowd'-CN=Elwood <a href="mailto:Dowd/O=ACME1@MYDOMAIN">Dowd/O=ACME1@MYDOMAIN</a></p> <p>NoteID: 110e</p> <p>Subject: &lt;unavailable&gt;</p> <p>Error: Error(3637): Unable to open note 110e - Cannot convert MIME message to <br />Notes Rich Text message.</p> <p>Trace:&nbsp;&nbsp;&nbsp; at DomNote.Open()<br />&nbsp;&nbsp; at LotusDominoMailboxArchivingTask.BaseQItem.OpenNote()<br />&nbsp;&nbsp; at LotusDominoMailboxArchivingTask.ArchiveQItem.Process()</p> <p></p>

Update of Vault Index with Storage transactions %5 to %6 suspended whilst processing transaction number %7 Vault: %2 Vault Id: %1 Vault Store: %3 Vault Store Id: %4 Elapsed Time: %8 (hours:minutes:seconds) Number of index additions replayed: %9 Number of index deletions replayed: %10 NOTE: The total number of index additions and deletions replayed may be less than the number of transactions processed. This is because the index update process is optimized so that index additions are not replayed for items that are known to have been fully deleted from the Vault. Number of archived items with an old version of the common index elements: %11 Number of archived items updated with the latest version of the common index elements: %12 NOTE: Index additions were performed using the latest version of the common index elements stored in the archived item. Where necessary the archived item was updated with the latest version of the common index elements.

Update of Archive Index with Storage transactions from %5 to %6 suspended whilst processing transaction number %7 during archive conversion Archive: %2 Archive Id: %1 Vault Store: %3 Vault Store Id: %4 Elapsed Time: %8 (hours:minutes:seconds) Number of index additions replayed: %9 Number of index deletions replayed: %10 NOTE: The total number of index additions and deletions replayed may be less than the number of transactions processed. This is because the index update process is optimized so that index additions are not replayed for items that are known to have been fully deleted from the Vault. Number of archived items with an old version of the common index elements: %11 NOTE: Index additions used the common index elements stored in the archived item. Items with old versions of the common index elements may not be indexed with the same level of functionality as items archived using the latest version of the common index elements.

<p>A Collector encountered an error attempting to migrate Collection file %2 to %3. The Collector will abandon migration for the current run. Migration attempts will continue during future runs. Reason: %1 PartitionEntryID: %4 Secondary Storage Location: %5 Method: %6 (%7) </p> <p>e.g.</p> <p>A Collector encountered an error attempting to migrate Collection file E:\Enterprise Vault Stores\EXUSNY1 Ptn11\1999\01\02\Collection59766.CAB to F:\US\VAULT_STORES\EXUSNY1\Partition 11 migration\FB933F8AE14B4C4E9593C9212886AB36\1999\01\02\Collection59766.CAB. The Collector will abandon migration for the current run. Migration attempts will continue during future runs. </p> <p>Reason: The system cannot find the path specified. [0x80070003] </p> <p>PartitionEntryID: 1FB933F8AE14B4C4E9593C9212886AB361q10000ACME-NY </p> <p>Secondary Storage Location: F:\US\VAULT_STORES\EXUSNY1\Partition 11 migration </p> <p><font size="1"><font size="3">Method: CMigrator::SendFile (SF/CD/F:\US\VAULT_STORES\EXUSNY1\Partition 11 migration\FB933F8AE14B4C4E9593C9212886AB36)</font> </font></p>

<p>A Collector encountered an error attempting to migrate Collection file %2 to %3. The Collector will abandon migration for the current run. Migration attempts will continue during future runs. Reason: %1 PartitionEntryID: %4 Secondary Storage Location: %5 Method: %6 (%7) </p> <p>e.g.</p> <p>A Collector encountered an error attempting to migrate Collection file E:\Enterprise Vault Stores\EXUSNY1 Ptn11\1999\01\02\Collection59766.CAB to F:\US\VAULT_STORES\EXUSNY1\Partition 11 migration\FB933F8AE14B4C4E9593C9212886AB36\1999\01\02\Collection59766.CAB. The Collector will abandon migration for the current run. Migration attempts will continue during future runs. </p> <p>Reason: The system cannot find the path specified. [0x80070003] </p> <p>PartitionEntryID: 1FB933F8AE14B4C4E9593C9212886AB361q10000ACME-NY </p> <p>Secondary Storage Location: F:\US\VAULT_STORES\EXUSNY1\Partition 11 migration </p> <p><font size="1"><font size="3">Method: CMigrator::SendFile (SF/CD/F:\US\VAULT_STORES\EXUSNY1\Partition 11 migration\FB933F8AE14B4C4E9593C9212886AB36)</font> </font></p>