xkÜrsion xr1.0 roll bag 5279 · 5279 pic 1 use extreme caution when bottom-side of bag to any part...
Embed Size (px)
THANK YOU FOR CHOOSING KϋRYAKYN! PROTECT YOURSELF AND OTHERS FROM POSSIBLE INJURY AND PROPERTY DAM-AGE OR LOSS. PAY CLOSE ATTENTION TO ALL INSTRUCTIONS, WARNINGS, CAU-TIONS, AND NOTICES REGARDING THE INSTALLATION, USE, AND CARE OF THIS PRODUCT.
MAKE SURE THE FOLLOWING PARTS HAVE BEEN INCLUDED IN THE KIT: 1 XKÜRSION XR1.0 Roll Bag 2 30” Cinch Straps 4 8” Hook & Loop Straps 1 Rain Cover 1 Guideline Sheet
Refer to PIC 1. Secure the bag to the existing luggage rack with the two bungee hooks. Twist the hooks 180 degrees so the hooks face upward.
CUSTOMER SERVICE 877.370.3604 (toll free)
[email protected] or call 715.247.2983
Küryakyn warrants that any Küryakyn products sold hereunder, shall be free of defects in
materials and workmanship for a period of one (1) year from the date of purchase by the
consumer excepting the following provisions:
● Küryakyn shall have no obligation in the event the customer is unable to provide a receipt
showing the date the customer purchased the product(s).
●The product must be properly installed,
maintained and operated under normal conditions.
●Küryakyn makes no warranty, expressed or
implied, with respect to any gold plated products.
●Küryakyn shall not be liable for any
consequential and incidental damages, including labor and paint, resulting from failure of a
Küryakyn product, failure to deliver, delay in delivery, delivery in nonconforming condition, or
for any breech of contract or duty between Küryakyn and a customer.
●Küryakyn products are often intended for use in
specific applications. Küryakyn makes no warranty if a Küryakyn product is used in
applications other than intended.
●Küryakyn electrical products are warranted for one (1) year from the date of purchase by the
consumer. L.E.D.’S contained in components of Küryakyn products will be warranted for defects in materials and workmanship for 3 years from
the date of purchase where as all other components shall be warranted for one(1) year.
This includes, but is not limited to; control modules, wiring, chrome & other components.
●Küryakyn makes no warranty of any kind in
regard to other manufacturer¹s products distributed by Küryakyn. Küryakyn will pass on
all warranties made by the manufacturer and where possible, will expedite the claim on behalf of the customer, but ultimately, responsibility for disposition of the warranty claim lies
with the manufacturer.
ABOUT OUR CATALOG For purchasing Küryakyn® products, you
can receive a complete catalog free of charge. Send the Proof-of-Purchase below with your
address to: Küryakyn 454 County Road V V
Somerset, WI 54025-9031 Please indicate either Accessories Catalog for
Harley-Davidson® or GL & Metric Cruisers.
Be sure to ask your local dealer about other Küryakyn® products, the motorcycle parts and
accessories designed for riders by riders.
©2005 Küryakyn USA® All Rights reserved.
XKÜRSION XR1.0 ROLL BAG
THIS INDICATION ALERTS YOU TO THE FACT THAT IGNORING THE CONTENTS DESCRIBED HEREIN CAN RESULT IN POTENTIAL DEATH OR SERIOUS INJURY.
This indication alerts you to the fact that ignoring the contents described herein may negatively affect product performance and functionality or damage the product itself or the product to which it is being attached.
This indication alerts you to the fact that ignoring the contents described herein can result in minor or moderate potential injury.
PIC 1 BOTTOM-SIDE OF BAG
TWIST HOOK 180 DEGREES
Use extreme caution when securing the bungee hooks to any part of the motorcy-cle. The hooks are under enough tension to cause injury. Wear eye protection to prevent injury.
These guidelines contain important information. Ensure that the end user receives this copy and is aware of its importance for future reference. Refer to the hang tags attached to the bag before using and securing bag to motorcycle.
Once the bag has been installed, it may be necessary to adjust the bungee strap tension. Inside the bag, locate and untie the knot under the bottom pad; tighten the straps, then retie the knot. Refer to PIC 2. Use the included 8” Hook & Loop straps and D-Rings to secure the bag directly to the luggage rack. Without deforming the bag, apply slight downward pressure to the mounting points to “preload” the straps as they are tight-ened. Refer to PIC 3. Once the bag has been securely installed, tie-off any strap-ends to prevent contact with painted surfaces, moving parts, or heat. Use the included Rain Cover in inclement weather to assist in providing a weather-resistant storage area.
STOW THE BAG: Refer to PIC 4. Unstick the back-pad from the inside of the bag, lay it flat on the bottom, then fold the sides down flat to store the bag when not in use.
XKÜRSION XR1.0 ROLL BAG INSTALLATION Ride On!
PIC 4 PIC 4
IT IS THE END USER’S RESPONSIBILITY TO USE COMMON SENSE, FOLLOW THE INCLUDED GUIDELINES, AND ADHERE THE MOTORCYCLE MANUFACTURER’S GAWR AND GVWR (GROSS AXLE WEIGHT RATING AND GROSS VEHICLE WEIGHT RATING), WHEN ATTACHING LUGGAGE TO THEIR MOTORCYCLE. ADDED WEIGHT, SHIFTING LOADS, AND IMPROPERLY ATTACHED LUG-GAGE CAN RESULT IN LOSS OF CONTROL LEADING TO DEATH OR SERIOUS INJURY!
8” HOOK & LOOP
Verify the bag is securely attached BEFORE operating the motorcycle. Secure all straps away from painted surfaces, moving parts, pinch points or heat. Check the straps before each ride and at each stop. Bag contents may shift during operation.