xexun gps vehicle tracker xt008 user manual

Download Xexun GPS Vehicle Tracker XT008 User Manual

Post on 25-Oct-2015

38 views

Category:

Documents

8 download

Embed Size (px)

TRANSCRIPT

  • 1

    GPS VEHICLE TRACKER

    USER MANUAL-XT008

    UPreface Thank you for purchasing GPS Vehicle Tracker. This manual shows how to operate the device

    smoothly and correctly. Make sure to read this manual carefully before using this product. Please note

    that specification and information are subject to changes without prior notice in this manual. Any

    change will be integrated in the latest release. The manufacturer assumes no responsibility for any

    errors or omissions in this document.

  • 2

    Content

    1 Summary ---------------------------------------------------------------------------------- 3

    2 Application --------------------------------------------------------------------------------- 3

    3 Hardware description

    3.1 Wires connection ---------------------------------------------------------------------------- 3

    3.2 Interior ------------------------------------------------------------------------------------- ------- 5 3.3 Relays connection ------------------------------------------------------------------------------- 5

    4 Specifications ---------------------------------------------------------------------------------------- 6

    5 Battery and SIM card installation ------------------------------------------------------------------ 6

    6 Startup ------------------------------------------------------------------------------------- ----------- 7

    7 Usage --------------------------------------------------------------------------------------------------- -- 7

    8 Fortifying mode --------------------------------------------------------------------------------- --------- 8

    8.1 Engine started alert ---------------------------------------------- --------- -------- 8

    8.2 Movement alert --------------------------------------------------------- --------- -------- 8

    8.3 Power cutoff alert --------------------------------------------------------- --------- -------- 8

    8.4 ENGINE-OFF Remotely function ---------------------------------------------- --------- -------- 8

    8.5 Increase relays function --------------------------------------------------- --------- -------- 8

    8.6 More function with using the relays ----------------------------------------- --------- ------- 9

    8.7 Checking the working status ---------------------------------- --------- -------- 9

    9 Tracking mode -------------------------- --------- -------- ------- 9

    9.1 Initialization ---------------------------------- --------- ------- 9

    9.2 Change the Password ---------------------------------- --------- ------- 10

    9.3 Authorization ---------------------------------- --------- ------ 10

    9.4 Auto Track ---------------------------------- --------- ------11

    9.5 Geo-fence ---------------------------------- --------- ------- 12

    9.6. Tlimit Function ---------------------------------- --------- ------- 12

    9.7 Movement alert ---------------------------------- --------- -------- 13

    9.8 Overspeed alert ---------------------------------- --------- -------- 14

    9.9 IMEI checking ------------------------------ --------- -------- 15

    9.10 Time zone setting ----------------------------------------------------------------- 15

    9.11 SOS --------------------------------- --------- -------- 15

    9.12 SMS LINK --------------------------------- --------- --------------------------------------16 8.13 SMS ONE ----------------------------------------------------------------------------16

  • 3

    9.14 Low battery alert --------------------------- --------- ------- 16

    9.15 SMS center ------------------------------ --------- -------- 16

    9.16 GSM ID --------------------------- --------- ------- 16

    9.17 Motion Sensor ---------------------------- --------- -------- 17

    9.18 SD Card function ------------------------------ --------- -------- 17

    9.19 SIM conversion from A to B ------------------------------ --------- -------- 17

    10 Monitoring and Talking Mode ------------------------------ --------- -------- 17

    11 GPRS setting ------------------------------------------------------------------- 18

    12 MMS picture function ------------------------------------------ 19

    13 RFID function --------------------------------------------------------------------- 19

    14 Cautions --------------------------------------------------------------------- 19

    15 Faults & Solutions --------------------------------------------------------------------- 19

    16 Cable connection diagram --------------------------------------------------------------- 19

    1 Summary

    Working based on existing GSM/GPRS network and GPS satellites, this product can locate and

    monitor any remote targets by SMS or GPRS,and guard against theft of Vehicle.

    2 Applications

    Rental vehicle / Fleet management etc

    Covert Tracking

    3 Hardware Description

    3.1 Wires Connection

  • 4

    1 SP Connects the round speaker (connection is ready ,only need connect the speaker) 2.SP + Connects the round speaker (connection is ready ,only need connect the speaker) 3. MIC + microphone +(connection is ready) 4. MIC + microphone -(connection is ready) 5. GND SOS GND (connection is ready) 6. SOS SOS +(connection is ready) 7. Oil test (analog input port )connects the black wire for the fuel sensor. Note: Please use our fuel sensor only. 8. ACC (digital input port) connect the ACC (ignition) 9. V + connects relay, connction is ready,conencts the relay,it works. 10. Output (digital output) Connects the extra relays 11. Temperature test (analog input port) connects the middle connector of the round temperature sensor. 12. Cut oil (digital output) connects the relay, connction is reay,conencts it,it works. 13. Out A (digital output) for the extra relay.

    Connect GSM

    antenna

    For upgrade the

    firmware Connect GPS

    antenna

    SIM B Card slot

    Working status indicator

    GPS indicator

    DC +9-36V

    GND

    1 3 5 7 9 11 13 15 17 19 A B C D

    2 4 6 8 10 12 14 16 18 20 E F G H

  • 5

    14. Out B (digital output) Connection of RFID voice control 15. IO6 in (digital input port) connects the detective circuit of the switches for the doors and tail in the car. 16. IO5 in(digital input port) connects the detective circuit of the switches for the doors and tail in the car. 17. IO4 in (digital input port) connects the detective circuit of the switches for the doors and tail in the car. 18. IO3 in (digital input port) connects the detective circuit of the switches for the doors and tail in the car 19. IO2 in (digital input port) connects the detective circuit of the switches for the doors and tail in the ca 20. IO1 in (digital input port) connects the detective circuit of the switches for the doors and tail in the ca Note: Two UART with the connectors of A.B C D; E F G H for 2 purposes. A. Connect the extra camera B. For input/output the data Connects any conenctors ABCD or EFGH optionally, function actived. UART1 (A.GND B.RX C. TX D.+5V) UART 2 (E.GND F.RX G.TX H.+5V)

    3.2 Interior

    3.3 Relays connection

    Put SIM card here A(back of Mainboard)

    Put SD card here

    Conencts the tracker

  • 6

    4 Specs Content Specs.

    Dimension. 8.2x8.2x2.8cm Weight 195g Network GSM/GPRS

    Band GSM850/ 900/1800/1900Mhz GPS chip SIRF3 chip

    GPS sensitivity -159dBm GPS accuracy 5m

    Time To First Fix

    Reacquisition 0.1s Cold status 45s Warm status 35s

    Hot status 1s

    Power 936V input

    Battery Chargeable changeable 3.7V 1100mAh Li-ion battery Standby 50hous

    Storage Temp. -40C to +85C Operation Temp. -20C to +55C

    Humidity 5%--95% non-condensing

    5 Battery and SIM card installation

    Make sure that there is no call transfer and call display is on, and PIN code off. The SMS message

    must in Text format, cant be identified for PDU format.

    Steps:

    1.Open the rear cover, insert a SIM card to the simcard slot A. (If using one simcard,do not insert it into simcard slot A since the default simcard is simcard B) 2.Insert the SD card 3.Use a stick to pick up the simcard slot B,insert the simcard.

    Relays

    Connect oil routes

    Connect oil routes

    SIM card A Use a stick to pick up the

    simard slot B

  • 7

    6 Startup

    Put the SIM card and SD card in right places.(Put the B card slot in place,the indicator light will

    blink quickly after 10 seconds, remove card slot B, tracker stops working)

    Connect the power supply of t

Recommended

View more >