xerox freeflow accxes firmware 10.3.2 b 201 (for ... page 4 1 introduction the accxes controller...

Download XEROX FreeFlow AccXES Firmware 10.3.2 b 201 (for ... Page 4 1 Introduction The AccXES Controller Firmware

Post on 19-Apr-2020

7 views

Category:

Documents

1 download

Embed Size (px)

TRANSCRIPT

  • XEROX FreeFlow AccXES Firmware

    10.3.2 b 201 (for HFT,PUN Controllers)

    March, 2006

  • Page 2

    Table of Contents 1 Introduction 4

    1.1 FEATURE KEYS: 4 1.1.1 Feature Key Descriptions 4

    2 Release Deliverables 6 2.1 Xerox 6030/6050 Wide Format Solution 6 2.2 Xerox 8850, 510dp Print Systems 6 2.3 Xerox Print System 721p 6 2.4 Xerox 8825, 8830 Print Systems 6 2.5 Xerox Print System X2 TECH 7

    3 Recommended Configurations 8 4 Release Installation 9 5 New Features of 10.3.2 b 201 10

    5.1 Title-block setting removed from Scanner UI menu (10.3.1) 10 5.2 Remote Media Mismatch for 6030/6050 (10.3.1) 10

    6 10.0-10.2 Feature Enhancements 11 6.1 Turbo III speeds supported for Scan-To-Net 11 6.2 Check Plot checkbox 11 6.3 Copier Margin range increased to +/- 8 inches 11 6.4 Disk Logging setting added to WebPMT 11 6.5 Added support for 440, 620 and 880mm rolls for 6030/6050 printers 11 6.6 Support for 30 inch roll on 6030/6050 printer 12 6.7 Disk Image Overwrite 12 6.8 Scan to FTP 12 6.9 Maximum Copy Length 12

    7 Release Notes 13 7.1 Controller 13

    7.1.1 Disk Image Overwrite 13 7.1.2 Firmware Installation of a Device Failed 18 7.1.3 Blank Pages after Firmware Installation 18 7.1.4 Stamp does not appear 18 7.1.5 Scaling interaction with “ANY” 18 7.1.6 Margins may cause image clipping 18 7.1.7 CGM Files and folding 18 7.1.8 Image wrap on 721 printer 18

    7.2 Xerox 6030/6050 Wide Format Solution 19 7.2.1 Long Plotting 19 7.2.2 Long Copying 19 7.2.3 Out of Toner reported as “printer needs attention” 19

    7.3 Scanner 19 7.3.1 Clear Last Image 19 7.3.2 Invert Feature and Recall Last Job 19 7.3.3 Upgrade Test Print 20 7.3.4 Scan-to-Print and Margins 20 7.3.5 Width Detection Sensors and Finishing 20 7.3.6 Background Suppression 20 7.3.7 Scaling shaded documents 20 7.3.8 50000015 errors while copying 20 7.3.9 Recalling sets 20 7.3.10 Washed out documents when scanning/copying 20

  • Page 3

    7.4 AccXES Client Tools 21 7.4.1 Manual feed media source 21

    7.5 Web Print Manager Tool (WebPMT) 21 7.5.1 Printer Queue – Main WebPMT Screen 21 7.5.2 Netscape 6.1 users only 21 7.5.3 Netscape 7.0 users only 21 7.5.4 German users only 21 7.5.5 Large Scaling Factors 22 7.5.6 Pen Palettes 22 7.5.7 HPGL Page – End of File 22 7.5.8 Display of Media Usage 22 7.5.9 Saved Parameter Settings 22 7.5.10 Default PostScript Page Size 23 7.5.11 String value of “0” in Text Fields 23 7.5.12 “Printer has been updated” message 23 7.5.13 Pen Patterns 23 7.5.14 Printer Password 24 7.5.15 Print Job Priority 24 7.5.16 Date and time shift position after update 24

    7.6 Netscape and Unix 24 8 Customer Issues Resolved 25

    8.1 The following Customer issues were resolved in 10.3.2 b 201 25 8.2 The following Customer issues were resolved in 10.3.1 b 220 25 8.3 The following Customer issues were resolved in 10.2 b 141 26 8.4 The following Customer issues were resolved in 10.1 b 118 27 8.5 The following Customer issues were resolved in 10.1 b 116 28

    9 Appendix 29 9.1 Controller Installation for Xerox Wide Format Solution 29

    9.1.1 AccXES Client Tools 29 9.1.2 WebPMT 29 9.1.3 Unix 29

  • Page 4

    1 Introduction

    The AccXES Controller Firmware Release 10.3.2 b 201 provides multinational software for the Xerox 6030/6050 Wide Format Solution, Xerox Wide Format Print Systems 8825, 8830, 8850, 510dp, 721p, and for the Xerox Wide Format Scan System. The languages supported are English, Deutsch, Espanol, Francais, Italiano, Portugues, and Russian.

    This document presents the following information about the AccXES Controller Release 10.3.2 build 201.

    • Release deliverables

    • Recommended configurations

    • Installation procedures

    • Present supplemental information and known issues that are not mentioned in the published customer user documentation.

    • New features

    1.1 FEATURE KEYS: Feature keys from before version 9.0 B180 are no longer useable with version 10.3.2 b 201 firmware. New keys must be acquired from the Xerox website to use your system. Downgrading below 9.0 B 180 will also require you to re-download your feature keys. This applies to AccXES controller resident feature keys only: Postscript, Job Accounting, Scan to Net, and Scan to Print.

    1.1.1 Feature Key Descriptions Print and Copy Feature Keys are standard with AccXES 10.3.2 build 201 firmware for all printers except the Xerox 6030/6050 Wide Format.

    Additionally, the following functions will be unavailable until the appropriate feature key is loaded.

    • Job Accounting Enables tracking media usage data for print, scan and copy jobs. Account Management Tool, or some other external accounting tool, is used to assign User Id, Account Id, Printer Id associations, then collects and tallies the stored data from the printers)

    • PostScript – Enables the interpretation of Adobe Postscript 3 and PDF 1.3 files.

    • Disk Image Overwrite – Enables the security options for overwriting image data on the hard drive.

    • Xerox Wide Format Scanner Features:

    Scan to Net - To create an electronic file from a scanned image.

  • Page 5

    Scan to Print - To scan, create a preview, and send the scanned image to the printer. Must also have Scan-to-Net is present.

    Color Enablement – AccXES - Allows color scanning when scan to net license is present.

    Speed Enhancement Turbo II – AccXES - Enables 4 IPS scan speed for 36” wide.

    Speed Enhancement Turbo III – AccXES – Enables 7.33 IPS Scanning on HFT/PUN model controllers only

    • Xerox 6030/6050 Wide Format Printer

    Print Server Enablement – Enables print and copy mode for remote printer.

    For more information on Feature Keys, see the Feature Key Instructions and Coupon Exchange screens on the www.xes.com/keys website.

  • Page 6

    2 Release Deliverables

    2.1 Xerox 6030/6050 Wide Format Solution

    The following executable is provided for the Xerox 6030/6050 Wide Format Solution and supports the Xerox Wide Format Scan System.

    HFT Controller – HFT_6030_10_3_2b201.disk.bin (file size = 7,732,614 bytes)

    PUN Controller – PUN_6030_10_3_2b201.disk.bin (file size = 7,732,614bytes)

    2.2 Xerox 8850, 510dp Print Systems The following executables are provided for the Xerox Wide Format Print System 8850, and 510dp and support the Xerox Wide Format Scan System scanner.

    HFT Controller – HFT_8850_10_3_2b201.disk.bin (file size = 7,636,585 bytes)

    HFT Controller – HFT_510dp_10_3_2b201.disk.bin (file size = 7,636,585 bytes)

    PUN Controller – PUN_8850_10_3_2b201.disk.bin (file size = 7,636,585 bytes)

    PUN Controller – PUN_510dp_10_3_2b201.disk.bin (file size = 7,636,585bytes)

    .

    2.3 Xerox Print System 721p The following executables are provided for the Xerox Wide Format Print System 721p and support the Xerox Wide Format Scan System scanner.

    HFT Controller – HFT_721p_10_3_2b201.disk.bin (file size =7,596,160 bytes)

    PUN Controller – PUN_721p_10_3_2b201.disk.bin (file size = 7,596,160 bytes)

    2.4 Xerox 8825, 8830 Print Systems The following executables are provided for the Xerox Wide Format Print System 8825, 8830 and support the Xerox Wide Format Scan System scanner.

    NOTE: You must load version 9.0 before loading this Firmware

    HFT Controller – HFT_8830_10_3_2b201.disk.bin (file size = 7,637,616bytes)

  • Page 7

    PUN Controller – PUN_8830_10_3_2b201.disk.bin (file size = 7,637,616 bytes)

    2.5 Xerox Print System X2 TECH

    The X2 TECH is no longer supported.

  • Page 8

    3 Recommended Configurations

    Table 1: Minimum (Min.) and Recommended (Rec.) RAM Configurations (MB) F45Y,CNG,N5T, EV4, KLF, and UP8 controllers are no longer supported.

    HFT/PUN Controller

    System Min. Rec.

    8825, 8830, 8850, 510, 6030, 6050

    128

    256

    721 512

    512

  • Page 9

    4 Release Installation

    NOTES:

    Feature keys from before version 9.0 B180 are no longer useable with version 10.3.2 firmware. New keys must be acquired from the Xerox website to use your system. Downgrading below 9.0 B 180 will also require you to re-download your feature keys.

    The AccXES Revision MUST be 9.0 or higher to upgrade to 10.3.2. If your current version is lower than 9.0, you must install 9.0 or higher before upgrading to 10.3.2.

    Regarding scanner firmware revisions: If you are upgrading the firmware of a system containing a Xerox Wide Format Scanner, you must also ensure that the scanner firmware is upgraded, prior to upgrading the controller, to the following version:

    Xerox Wide Format Scanner – version 2.2.4 or greater. Version 3.2.6 or greater needed for full functionality.

    Xerox 7356 and 7346 Scanners are no longer supported.

  • Page 10

    5 New Features of 10.3.2 b 201

    Version 10.3.2 build 201 is intended to be a SPAR release for the HFT, and PUN controllers, there are no new features beyond 10.3.1.

    The following is a list of new features since version 10.2 of the Accxes Controller.

    5.1 Title-block setting removed from Scanner UI menu (10.3.1)

    The menu entry for setting the title-block location has been removed from the scanner UI menu in

Recommended

View more >