xel-005phu commercial dimmable led driver series · sales@xener. www.. 002101 201 . g eserved 00p p...
TRANSCRIPT
Revision No#: 002B-19-01©2019 XenerQi. All rights reserved
XEL-005PHU Driver Product Family
Pg. 01|04
XEL-005PHU Commercial Dimmable LED Driver Series5W LED Driver Family0-10V, 5% Dimming
Typical Applications
Pendant Lighting Track Lighting Stairwell Lighting Decorative Lighting
Ideal for Accent, Track & Stairwell lighting
Designed for continuous 24/7 use
Enables DLC compliant fixtures
Universal AC input (108~305Vac)
DC Dimming from 5~100% (0-10V)
Complies to FCC CFR Title 24 Part 15, Class B
Class A Noise Rating
Class 2 power supply (UL8750)
Built-in Commercial Grade Surge Suppression
Integrated over voltage, over current, short circuit and temperature protection
Full power operation between -40°C to +45°C ambient with -40°C cold start
Enables luminaire to meet market requirements (PFC, THD, flicker & lifetime)
Turn on/off in less than 0.5 seconds
XenerQi Industry Leading 5 Year True WarrantyTM 5
See product specific data pages for details
DRIVER
UL
CLA
SSPCLASS B
TRUE WARRANTY TRU
E W
AR
RANTY TRUE WARRANTY
TR
UE
WA
RRA
NTYDIMMING
VIA
0-10V
Revision No#: 002B-19-01©2019 XenerQi. All rights reserved
XEL-005PHU Driver Product Family
Pg. 02|04
Mechanical Drawings-Dimensions(not to scale)
55.9mm ±0.2
27m
m ±
0.2
38.1mm ±0.2
160mm ±20 10mm ±2
M3 Fixin
g
AC LAC N
DIM +DIM -
DC +DC -
Case Wire DimensionsMaterial Wire GaugeWhite Plastic (V0) 18AWG Unit Weight Wire LengthTBC 160mm (±20mm)Dimensions Strip Length48.3mm x 38.1mm x 22.8mm 10mm (±2mm)Fixings 2x M3 Screws
Available ModelsVariants available upon request
Part NumberOutput Current
(mA)Output Voltage
Range (V)Maximum
Efficiency 6Max Output
(W)
350700
6 ~ 126 ~ 8
70%70%
4.2W5.6W
XEL-005PHU-CX350M-ZNA01PXEL-005PHU-CX700M-ZNA01P
Con
stan
t Cur
rent
Varia
nts
The information and specifications contained in this summary sheet are believed to be accurate and reliable at the time of publication, however Xenerqi Limited assumes no responsibility for damages caused due to potential errors. Also, Xenerqi Limited assumes no responsibility for the use of this product in such as way that it infringes on patents or other rights of third parties. No license is granted by implication or otherwise under any patent rights of Xenerqi Limited. Specifications are subject to change without notice.
See XEL-045RBU for Side Exit Wires(no studs or bottom wire exit)
Serial No# & Manufacture Date
Model No#
DRIVER
WHITE(NEUTRAL)
BLACK(LINE)
RED(LED+)
BLUE(LED-)
VIOLET(DIM+)
GRAY(DIM-)
Made in China
Class 2 DC Output: 6-8V 700mA
AC Input: 120-277Vac 0.12A 50/60Hz
For Dry and Damp Locations
For Connections Use Wire Ratedfor at Least 90°C (194°F)
Ta= 50℃Compliant with FCC CFR Title 47Part 15
E354357Class P
Class P
���
DRIVER
WHITE(NEUTRAL)
BLACK(LINE)
RED(LED+)
BLUE(LED-)
VIOLET(DIM+)
GRAY(DIM-)
Made in China
Class 2 DC Output: 6-12V 350mA
MODEL:XEL-005PHU-CX350M-ZNA03P0-10V Dimmable Constant Current LED driver
MODEL:XEL-005PHU-CX700M-ZNA03P0-10V Dimmable Constant Current LED driver
AC Input: 120-277Vac 0.12A 50/60Hz
For Dry and Damp Locations
For Connections Use Wire Ratedfor at Least 90°C (194°F)
Ta= 50℃Compliant with FCC CFR Title 47Part 15
E354357
���15 5* mm
15 5* mm
27
.7+
/-0
.1M
M
R7
44.7+/-0.1MM
R7
Type HL
Type HL
Revision No#: 002B-19-01©2019 XenerQi. All rights reserved
XEL-005PHU Driver Product Family
Pg. 03|04
Specification Data
Output 6 ~ 12 VDC (see available parts table for details)DC Voltage Range0.35~0.70 A (not dimmed - see specific model pages)
±5%±5%
Rated Current Rangeup to 5.6WRated Power
LineRegulation1
Load Regulation1
Input 120 ~ 277VAC Nominal (108 ~ 305VAC Operational)Voltage Range2
47 ~ 63HzFrequency RangePFC > 0.90 at ≥ 75% of full power over nominal input rangeTHD < 20% at ≥ 75% of full power over nominal input range
< 500ms (at full load)
Power Factor
THD
Turn On/Off Time
Environment
Safety & EMC
Dimming
Protection
-40°C ~ +45°C ambient (Hotspot rated for 90C)3
IEC Compliant. Customized dimming curves available upon request
260µA
VOUT < 60V (Class 2)
Working Temperature
EMI Conduction & Radiation
Compatibility0-10V Source Current
Over Voltage
20% ~ 90% RH non-condensingDry, Damp location use
Compliance to FCC CFR Title 47 Part 15 Class B at 120VAC and Class A at 277VAC
UL8750, Class 2 (UL1310), Class P rated
Limited to ISET
< 5A @ 25°C, 120VAC (cold start with full load)
Current foldback at hotspot greater than 90°C (shut down after reaching Tcritcial)4
10% ~ 90% RH non-condensing
2kV Combination, 2.5kV Ringwave
Working HumidityUL Rating
Safety Standards
Over Current
Typical Inrush Current
Over Temperature
-40°C ~ +85°C ambient
Compliance to EN61000 and ENEN55014
DC Dimming control: 0-10VDC (5% & 10%) Sink/Source
Auto Restart
1 g/s5~500Hz 5g 12 min/1 cycle period (for 30 min each axis)
Storage Temperature
EMI Immunity
Modes
Short Circuit
Storage Humidity
Transient Immunity
Impact ResistanceVibration
1 Guaranteed only within nominal input range.2 Critical parameters guaranteed over nominal input range.3 Ambient is estimated. Trigger point is based on temperature at hotspot.4 Shutdown requires power cycle to recover.5 True Warranty refers to operation at full load and max hotspot temperature. For specific warranty details refer to XenerQi published warranty document.6 Units optimized for steady state forward voltage in the 36~38Vdc range.
50,000 Hours at Full Load & Maximum HotspotOperating Life
Class ANoise Rating
Revision No#: 002B-19-01©2019 XenerQi. All rights reserved
XEL-005PHU Driver Product Family
Pg. 04|04
Operation Performance-Family
Installation GuideMounting Diagrams
0-10VDimmer
XEL-005PHU(0-10V Dimming)
+
L
N
LED
DIM
Imax
T1 T2
Imax =Refer to Output Current rating of each varient for specific value.*Custumized thermal foldback profiles available upon request.
Output Current vs Temperature
Normal Foldback Critical
Full Dimmed Off120
277
250 700 I(mA)
Power Factor / THD Range
THD<20%PFC>0.9
V
Imax =Refer to Output Current rating of each varient for specific value.*Custumized profiles available upon request.
Fix using 2 M4 screws and 2 M4 nuts for recommended mounting.
WiresDimming
ColoursPurple (Dim +)Grey (Dim -)
TypeUL1015 AWG 18UL1015 AWG 18
WiresInput
Output
ColoursWhite (Neutral)Black (Line)
Red (Positive)
Blue (Negative)
TypeUL1015 AWG 18UL1015 AWG 18
UL1430 AWG 18
UL1430 AWG 18
WARNING: TO REDUCE THE RISK OF FAILURE / INJURY:
DRIVER MUST BE INSTALLED IN LUMINAIRE AND GROUNDED IN ACCORDANCE WITH THE LOCAL CODES.
FAILURE TO DO SO MAY RESULT IN SERIOUS INJURY AND/ OR DAMAGE TO THE SYSTEM.