www.its-tel.comcopyright © july 2004 by its1. © july 2004 by its2 pancam-c pancam-t pancode...
TRANSCRIPT
www.its-tel.comCopyright © July 2004 by ITS1
www.its-tel.comCopyright © July 2004 by ITS2
PanCam-C
PanCam-T
Pancode
Pantel
Pancode
Pantel
Access Control Door Phone Units
www.its-tel.comCopyright © July 2004 by ITS3
Access Control Door Phone FeaturesAll units have the following features:• Connected to the analog port of the PBX
• Internal door opening code from any extension
• Day/Night mode
• High quality speakerphone
• Support 12V AC/DC
• Volume control
• Works in conjunction with card readers and security devices
• Simple to operate and program
www.its-tel.comCopyright © July 2004 by ITS4
PanCam-C
Main Features• Build-in black & white or color high-
quality pinhole camera• Direct dialing to any extension • Speed-dial to internal or external
subscribers • Entry access code• Weather and vandal resistant
www.its-tel.comCopyright © July 2004 by ITS5
PanCam-T
Main Features• Build-in black & white or color high-
quality pinhole camera• Dialing to a pre-defined
extension/subscriber • Weather and vandal resistant
www.its-tel.comCopyright © July 2004 by ITS6
Pancode
Main Features• Direct dialing to any
extension • Speed-dial to
internal or external subscribers
• Entry access code• Outdoor and Indoor
version
Indoor Outdoor
www.its-tel.comCopyright © July 2004 by ITS7
Pantel
Main Features• Dialing to a pre-
defined extension/ subscriber
• Outdoor and Indoor version
Indoor Outdoor
www.its-tel.comCopyright © July 2004 by ITS8
Installation
Connector Wiring
Outdoor Bracket Indoor Bracket
www.its-tel.comCopyright © July 2004 by ITS9
Installation Overview
PBX
Door Lock Relay
P.S.
AnalogPort
www.its-tel.comCopyright © July 2004 by ITS10
Connector
Analog PBX Port
Exit Button
Power Supply (12-24VDC)
Door Lock Relay
External devices
www.its-tel.comCopyright © July 2004 by ITS11
Programming
• Call the Door Phone unit from any extension
• The unit answers and plays a beep
• Dial *900
• Insert password (default = 1234)
• Refer to the Programming Table in the manual
www.its-tel.comCopyright © July 2004 by ITS12
Special Features and Applications
Day/Night mode
This feature allows you to set the “Call” button to a different destination for day and night.
Changing the mode of operation:• Call the unit’s extension number• Press *80 for “Day mode” (Default) or• Press *82 for “Night mode”
www.its-tel.comCopyright © July 2004 by ITS13
Special Features and Applications (Cont’d)
Speed Dial mode
This feature allows you to define the “Speed Dial” codes for each button on the keypad, directing you to different destinations.
Changing to the “Speed Dial mode”:• Call the unit’s extension number• Press *900 + password• Press *152• Start programming (refer to the Programming Table in the manual)
NOTE: For PanCam-C / Pancode only: