Syntek Global

XFT

FUEL TREATMENT

Syntek Global

Syntek Global

#34 Eric Schmidt, & #50 Chris JohnsonThanks to Terry Thomson

Syntek Global

Syntek Global

Syntek Global

Syntek Global

Fuel Savings

Engine Life

Emission Savings

Syntek Global• Product History (18 years)• What is a Catalyst, Burn Rate Modifier

Organo-metallic chemistry.• How does it work / high concentration Reduces the temperature at which combustion occurs (in a diesel engine from 1200°F

to 800°F)

• Increases the burn of the available BTU’s of fuels. 3 The combined result is a much more complete burn generating more power, and/or requiring less fuel to generate the same power per pound of fuel consumed

• Compare to other products

• Additional products added for better results.

Syntek GlobalCorrosion Inhibitors--Rust Removal

Syntek GlobalDetergents--Clean and Maintain

Syntek Global

Clean Fuel spray burn

Syntek Global

Stabilizer--Prolongs life of fuel

Syntek Global

Lubricant--Pumps and Injectors

Syntek GlobalDemulsifies--Separate water from fuel

Polymerization RetardantsReduce Solid Formation

Syntek Global

Syntek Global

• What makes our product different? • Concentration of product and other ingredients.

• $60.00 VS. ¼ OZ. $3.50

Syntek GlobalOther leading retail brands:

– “Red Line” Fuel Catalyst • 12 oz. treats 20 gallons of fuel Retail cost: $6.99

– “Techron Concentrate Plus Fuel System Cleaner• 12 oz. treats 12 gallons of fuel Retail cost: $7.99

– zMax Micro-Lubricant Fuel Formula• 12 oz. treats 20 gallons of fuel Retail cost: $19.99

– Sta-Bil Fuel Stabilizer• 8 oz. treats 20 gallons of fuel Retail cost: $5.99

– Diesel Power Anti-Gel Fuel Treatment• 12 oz. treats 35 gallons of fuel Retail cost: $5.99

– Gum out Gasoline Treatment• 12 oz. treats 21 gallons of fuel Retail cost: $2.99

– HEET water Demulsifier• 12 oz treats 20 gallons of fuel Retail cost: $1.99

– 104 Octane Booster• 16 oz. treats 25 gallons of fuel Retail cost: $7.99

– Total • 96 fluid ounces to treat approx. 20 gallons of fuel - Retail cost: $59.92

Syntek GlobalLower maintenance costs

15,000 HOURS ON THESE PISTONS—EXTENDED TO 25.000 HOURS

Environmental

Does this look familiar?

Syntek Global

• Smoke reduction

Syntek Global• No Alcohol • EPA Registered• Use Lower Octane Gas With No Pings.• No Warranty Issues• Lower Maintenance Costs• More Horsepower• 15ppm Fuel—older trucks• Anti-Gel• Winter blend fuels

Syntek Global

• What is Carbon Mass Balance Tests?

• Carbon measured in the engine exhaust gas is related to the carbon content of the fuel consumed.

• Carbon balance has been found to be a more precise fuel consumption test method than the alternative volumetric-gravimetric methods.

Syntek Global• The Carbon Mass Balance test is a fundamental part

of the Australian Standards. AS2077-1982. Further, the Carbon Mass Balance test procedure has proven to be an intricate part of the United States EPA, FTP and HFET Fuel Economy Tests. Also, Ford Motor Company characterized the carbon balance test procedure as being “at least as accurate as any other method of volumetric-gravimetric testing.” (SAE Paper No. 750002BruceSimpson, Ford Motor Company) Finally, the Carbon Mass Balance procedure is incorporated in the Federal Register Voluntary Fuel Economy Labeling Program, Volume 39. HFET- Highway fuel economy test FTP-Federal test procedures

Syntek Global

Base line –run product–rerun test

Syntek GlobalIndustrial and Transportation Customers

• Know which reports and what they mean that you are giving out.• Reports to give your customer (D975, Emissions, Pama, Stationary

Generator, Testimonies, Mass Carbon Balance summary, and Q and A’s).

• Answer questions, schedule testing.• Testing: same route, same driver, same loads, and same fuels. (all

fuels are not the same)– Base line• Close the sale. Can take months to close

Syntek Global

Benefits Review• Stabilizer--Prolongs life of fuel• Lubricant--Pumps and Injectors• Detergents--Clean and Maintain• Polymerization Retardants--Solid Formation• Corrosion Inhibitors--Rust Removal• Demulsifies--Separate water from fuel• Reduces Carbon Buildup• Catalyst• Test Results

Syntek Global

• Great business opportunity

• Two year Commitment

• Research and Development

• New Products

• New Tests

Syntek GlobalFreezPoint

Anti-gel/winterizing agentCold Flow Improver lowers the pour point of distillate fuels approximately 20°F

1 gallon per 1,000 gallons of fuel.

• Features include

Dissolves readily in fuel even when cold

Pours easily

No special shipping required in drum or smaller packages

Proven effective on biodiesel blends to B-20

Ultra Low Sulfur Diesel Compliant

Solubility in Fuel 100% Normal Treatment Rate 1:1,000 to 1:2,000 (can be increased if needed)

• FreezPoint Cold Flow Improver is formulated to be completely soluble in both petroleum and blended biodiesel fuels and is designed to be added directly to fuels at a rate of 1 gallon per 2,000 gallons for a 10* drop and 1 gallon to 1,000 for a 20* drop

Syntek Global

For all type of Applications: Transportation, Sport Vehicles, Marine, Manufacturing

•Excellent degreaser (commercial / industrial arenas)•Cleans bugs, tar and road grime•Leaves a smooth, shiny, water-beaded coating, won’t scratch the paint•No buckets, No hoses, No mess•Use on paint, chrome, plastic and glass•12 ounce bottle treats 3 to 4 vehicles•No Silicon added•Encapsulates dirt particles for easy wipe off•Comes with Microfiber Towel

Syntek GlobalDelivery box for commercial users