www v5.pdfneck pickup bridge pickup “hot” wire to tip earth wire to sleeve solder point output...
TRANSCRIPT
Neck Pickup
Bridge Pickup
“Hot” wire to tip
Earth wire to sleeve
www.PitBullGuitars.com
Solder point
Output Jack
Three way switch
www.PitB
ullGuitars.
com
2 2 2 2 HumbuckerHumbuckerHumbuckerHumbucker, , , ,
4 4 4 4 Pots Pots Pots Pots & & & & a a a a 3 3 3 3 way switchway switchway switchway switchWiring DiagramWiring DiagramWiring DiagramWiring Diagram
Neck Volume Pot(500K)
Capacitor
Ground to bridge
Ground wire(bare)
Hot wire(white)
Ground wire(bare)
Hot wire(white) Capacitor
Neck Tone Pot(500K)
Bridge Tone Pot(500K)
Bridge Volume Pot(500K)
Notes: • No wires pre soldered at factory • Purple Purple Purple Purple wires may not be required if cavities are shielded and Pots are in contact with the shielding.
Suitable for: ES-1G, ES-1GL, ES-1GT, ES-12G, ES-2, ES-2T, ES-2V, ES-3, FB-1, FC-1, IC-1, LP-1, LP-1L, LP-1M, LP-1P, LP-1S, LP-1SS, LP-1SSL, LPA-1, MB-1, PBG-2, PRS-1TS, RC-1, TL-1HA, SG-1, SG-1L, SG-1F, SG-2
© PitBull Guitars 2014