wwk-911 921 datasheet

Upload: jesus-navas

Post on 01-Mar-2016

255 views

Category:

Documents


1 download

DESCRIPTION

wwk files

TRANSCRIPT

  • www.telmor.pl

    GZT TELKOM-TELMOR SP. Z O.O, ul. Mickiewicza 5/7, 80-425 Gdask, Poland tel. +48 58 690-93-21, fax. +48 58 690-93-88, e-mail: [email protected]

    Universal multiband amplifiers

    The WWK-911 and WWK-921 multiband

    amplifiers are designed for using in collective antenna

    systems receiving terrestrial digital TV (DVB-T)

    programs in detached houses, residences, hotels,

    holiday centers, schools, hospitals, etc. Even situated

    in places with difficult reception conditions where

    received signals have different levels and are coming

    from different directions. Amplifiers are designed for

    receiving these signals, selecting requested channels,

    equalizing their levels and amplifying them.

    The WWK-911 / WWK-921 amplifier can be used:

    as an independent unit as a part of

    a satellite multiswitch systems as additional

    signal source of RTV signals to the input of

    individual multiswitch.

    as a part of a simple head-end up to

    frequency of 860 MHz.

    Additional input (AUX) of the amplifier enables adding

    at the output signals coming from such equipment like:

    CCTV camera, DVD player, satellite tuner or PC with

    TV signals and their further transmission in cable

    network. The advanced Automatic Control Functions

    of the amplifier (e.g. signal level equalization, auto

    detection and supply of antenna preamplifiers) enable

    their easy activation.

    The WWK-911 and WWK-921 multiband

    amplifiers are dedicated for indoor use.

    ISO 9001 CERTIFIED

    Designed for RTV collective antenna installations

    MATV and SMATV systems.

    Selective amplification of up to 8 input UHF signals.

    Automatic detection and power supply for antenna

    preamplifiers connected to UHF1 UH4 inputs.

    Ready to digital terrestrial TV transmission

    DVB-T.

    Built-in 2-input AV modulator only WWK-921.

    Low power consumption.

    Easy installation and adjustment.

    WWK-911, WWK-921 RoHS

  • www.telmor.pl

    GZT TELKOM-TELMOR SP. Z O.O, ul. Mickiewicza 5/7, 80-425 Gdask, Poland tel. +48 58 690-93-21, fax. +48 58 690-93-88, e-mail: [email protected]

    TECHNICAL SPECIFICATIONS

    WWK-911, WWK-921 Inputs BI / FM VHF UHF1, UHF2, UHF3 UHF4 AUX

    Frequency range MHz 47108 174230 470862 8 tuned channel paths*** 470862 47086

    2 Gain dB 25 2 40 2 45 3**** 33 2 20 2

    Gain regulation / -20 smooth -20

    smooth -20

    smooth -3, -6

    switchable -

    Gain adjustment after paths combining 0, -3, -6 switchable

    Selectivity channel paths dB - - 22 - - Noise figure dB 3 3 5 - - Max. input signal level* dBuV 100 90 80 85 91 Min. input signal level:** - for S/N > 30dB - for S/N > 45dB

    dBuV

    41 56

    39 54

    40,5 55,5

    48 63

    62 77

    Isolation between inputs: - UHF UHF - BI/FM/VHF UHF

    dB dB

    30 50

    Modulator output signal level 110 (WWK-921) Modulator output signal level adjustment dB -20

    Modulator output channels ch.21ch.69 (WWK-921) Modulator audio subcarrier 5,50 or 6,50 switchable (WWK-921) Max. output signal level: - for 2 TV channels - for 10 TV channels (DIN 45004B (-60dB)

    dBuV dBuV

    108 -

    112 106

    Test point dB yes, -20

    Preamplifiers power supply V /mA - 12 / 50 for each of UHF input -

    Input / output impedance 75 Operating temperature range K (C) 263.323 (-10.+50) Power supply V AC/ Hz / W 230 / 50 / 15 Dimension mm 400 x 130 x 50 Weight kg 1,0 * for higher input signal levels an external attenuator should be used! ** for lower input signal levels an antenna preamplifier application is recommended! *** switch position for possible channel paths assignments to antenna inputs are given in user manual. **** In the frequency range 814862 MHz (ch.64ch.69) the gain range is 3045 dB and the selectivity range is 1622 MHz.