wraptite - a. proctor group ltd. datasheet for... · perms it provides high vapour permeability in...
TRANSCRIPT
www.proctorgroup.com
DATA SHEET
90DAYS
Wraptite contributes to LEED points in multiple categories.
Exposure time during construction
> No primer required > Self-adhered> Airtight yet vapour permeable> Water resistant> Resilient composition, which resists punctures
and tears during construction> Flexibility, facilitating ease of application
and detailing> Can be left exposed for up to 90 days > No VOC’s> Creates airtight seal
KEY BENEFITS OUTLINED
Water Resistant
Puncture & Tear Resistant
Flexible No VOC’s
www.proctorgroup.com
Wraptite fully bonds (no mechanical attachment) to almost any substrate for improved airtightness and ease of installation, negating requirement for sealants or tapes.
Wraptite airtight membrane prevents lateral air movement enhancing the buildings thermal performance. With a breathability of 54 Perms it provides high vapour permeability in a commercial quality, self-adhered, airtight breathable membrane.
Wraptite is unsurpassed in performance.
DRYING CAPACITYWith a rating of 54 Perms, Wraptite allows damp sheathing to dry quickly and moisture vapour to escape. This ensures good indoor air quality whilst reducing incidence of mould, mildew, condensation, timber distortion and metal corrosion.
ADHESIVE DURABILITY & COST EFFECTIVENESS• No primer required• Tough facer laminate resists punctures and
tears during construction• Lightweight and easy to install• Manufactured rolled goods ensure consistent
properties and performance• Wide service temperature range• Can be left exposed for up to 90 days
MULTIPLE SUBSTRATE COMPATIBILITY• Exterior Gypsum Sheathing • Most rigid insulation • Pre-painted steel • OSB • Precast concrete • Concrete block • Aluminium (painted or mill finish)• Cast-in-place concrete• Galvanized metal• Rigid vinyl• Steel• Plywood
WHY CHOOSE WRAPTITE?
Wraptite combines the best properties of a vapour permeable membrane and airtight membrane in one innovative, affordable self-adhering product.
AIRTIGHTNESS
Wraptite
Wraptite roll with PET release liner
VAPO
UR
AIR
WAT
ER
Hydrophobic outer layer repels liquid water
Airtight core prevents air leakage and convective heat transfer
Vapour permeable structure releases moisture from building envelope
Patented vapour permeable adhesive
www.proctorgroup.com
[email protected] | +44 (0) 1250 872261
DATA SHEET
Download a full Wraptite brochure from our website...
Wraptite
WRAPTITE TESTINGAs tested per ASTM E 2357.05 on the following substrates: Dens Glass Gold, CMU Block
PROPERTY TEST/STANDARD RESULT
Roll Length 164’ (50m)
Roll Width 59” (1.5m)
Nominal Thickness Calibrated Deadweight Micrometer 26 mils (0.65mm)
Basis Weight Electronic Weigh Scale 0.9175 oz/ft2 (280 g/m2)
Roll Weight 54 lbs (24kg)
Application Temperature 14°F to 140°F (-10°C to 60°C)
Service Temperature - 40°F to 210°F (- 40°C to 100°C)
Water Resistance AATCC - 127 PASS (22in. head of water - 5hrs)
Air Permeance ASTM 2178 PASS 0.0011 L/s/m2 @ 75 Pa
Air Barrier ASTM E 2357.05* PASS 0.0048 cfm/ft2
Water Vapour Transmission ASTM E96 Method AMethod B
39 Perms54 Perms
Peel Adhesion ASTM D3330 PASS
Tensile Strength ASTM D882 MD 50 lbf/in CD 30 lbf/in
Flame Spread ASTM E-84 0 - Class A
Smoke Development Index ASTM E-84 10 - Class A
Wraptite used in Seed House, Sydney Wraptite used in Sunshine Mosque, Australia Wraptite used in Parker Tower, London
Issued February 2019