Unlocking Complexities

Wrap-around Manual Tongs

franksinternational.com For more information call 1-800-833-7265

©2016 Frank’s International. All Rights Reserved. Frank’s International products and services are subject to the Company’s standard terms and conditions, available on request. Unless noted otherwise, trademarks and service marks herein are the

property of Frank’s International. Product and service information and/or specifications are subject to change without notice. For more information please contact an authorized Frank’s International representative.

Use in the following applications: Deepwater and ultra-deepwater Mid-water shelf Land

Key Benefits and Features

• Four tong models: F-25, F-65, F-85, and F-120

• Each model provides nearly 270° of die contact around the tubular being gripped

• Due to the large amount of die contact, these tongs dramatically reduce the amount of die marking on the pipe body, making them ideal for use on CRA materials

• Steel and aluminum die designs available

*Any OD tubular within the range listed above can be gripped with special dies upon request. Extra lead time required for special OD dies. Common pipe and coupling sizes normally available.

**F-85 x F-65 die adapter available that will allow the F-85 model to run the pipe sizes listed under the F-65 model.

Rev. 1

Model Torque Capacity Pipe Size Range*

F-25 2,500 foot-pounds1 inch to

2 7/8 inches

F-65 25,000 foot-pounds2 3/8 inches to

6 5/8 inches

F-85 35,000 foot-pounds6 5/8 inches to 8 5/8 inches**

F-120 35,000 foot-pounds8 3/4 inches to

12 inches

Specifications