wpq 251
TRANSCRIPT
Dodsal Pte Ltd
Q-Chem Project
Doha, Qatar
Job No 7979
QW 484-RECORD OF WELDER QUALIFICATION TESTS(SEE ASME BPV CODE SECTION IX)
Welder Name : P. Rajendran Stamp No : D005Using WPS No : WPS/7979/PP/21 Rev. : 1 Date 08.01.01
Photo
VARIABLE ACTUAL VALUES QUALIFICATION RANGE
Process SMAW SMAWProcess Type Manual ManualBacking (metal,weld metal,flux With Backing for SMAW With Backing for SMAW
etc.)(QW-402)Material Specifications (QW-403) P1-P1 P1-P11 Thickness - Groove 10.97mm 15.94mm max.
- Fillet N.A. All Diameter - Groove 6" NB Sch 80 2½" NB and Over -Fillet N.A. AllFiller Metal (QW-404)Specification Number - Class E316L -15 N.A. - SFA Number 5.4 N.A. - F Number 5 with backing F1 & F5 with backing
Weld deposit Thickness for each Process 7.97mm 15.94mm Max deposited weld metal +Reinforcement
Position (QW-405) 6G All Weld Progression (QW-410) Uphill UphillGas Type (QW-408) N.A. N.A.Gas Backing N.A. N.A.Electrical Characteristics (QW-409) - Current DC DC - Polarity Reverse Reverse
Guided Bend Test Results QW-462(a), QW-462.3(b)Identification No. Type of Bend Mandrel Dia. Angle of Bend Test Result
F1 Face Bend 4T 180 N.A.F2 Face Bend 4T 180 N.A.R1 Root Bend 4T 180 N.A.R2 Root Bend 4T 180 N.A.
Radiographic Test Results (QW-304 & QW-305)Radiographic Results : Al-Misnad Report No : 951 Dated 07.05.01
Fillet Weld Test Results. See QW-462.4(a) & QW-462(b)Length & Percent of Defects : N.A. mm N.A. %Macro Test Fusion : N.A.Appearance Fillet Size(leg) : N.A. x Convexity N.A mm
or Concavity N.A mmWe certify that the statement in this record are correct and that the test coupons were prepared, welded and tested in accordance with the requirements of sections IX of the ASME code.Test Witnessed By: Mr. A.K. Damawale Sign:
Test Conducted By: Mr. Shrikant A Sign: Lab Test Report No. N.A.
Date : 09.05.01 Organisation : Dodsal Pte Ltd. KBRT
Format No : DOD/Q-Chem/F043 Rev. 0 DOD/WQT/251
c:\DIR00001\wpq\wpq251.xls