wpq 200

Dodsal Pte Ltd Q-Chem Project Doha, Qatar Job No 7979 QW 484-RECORD OF WELDER QUALIFICATION TESTS (SEE ASME BPV CODE SECTION IX) Welder Name : Sukumara Pillai Stamp No : D083 Using WPS No : WPS/7979/PP/04 Rev. 1 Date 15.10.2000 VARIABLE ACTUAL VALUES QUALIFICATION RANG Process GTAW GTAW Process Type Manual Manual Backing (metal,weld metal,flux With Backing for subsequent pass With Backing for subs etc.)(QW-402) Material Specifications (QW-403) P1-P1 P1-P11 Thickness - Groove 5.54mm 11.08mm Max deposited - Fillet N.A. All Diameter - Groove 2" NB Sch 80 3/4" NB and Over -Fillet N.A. All Filler Metal (QW-404) Specification Number - Class ER 70-S2 N.A. - SFA Number 5.18 N.A. - F Number 6 All F-No 6 Weld deposit Thickness for each Process 5.54mm 11.08mm Max deposited Position (QW-405) 6G All Weld Progression (QW-410) Uphill Uphill Gas Type (QW-408) N.A. N.A. Gas Backing N.A. N.A. Electrical Characteristics (QW-409) - Current DC DC - Polarity Straight Straight Guided Bend Test Results QW-462(a), QW-462.3(b) Identification No. Type of Bend Mandrel Dia Angle of Bend Test Result F1 Face Bend 180 N.A. F2 Face Bend 180 N.A. R1 Root Bend 180 N.A. R2 Root Bend 180 N.A. Radiographic Test Results (QW-304 & QW-305) Radiographic Result Al-Misnad Report No :696 Dated 19.04.01 Fillet Weld Test Results. See QW-462.4(a) & QW-462(b) Length & Percent of Defects : N.A. mm N.A. % Macro Test Fusion N.A. Appearance Fillet Size(leg) : N.A. x N.A. Convexity N.A. mm or Concavity N.A. mm We certify that the statement in this record are correct and that the test coupons were prep accordance with the requirements of sections IX of the ASME code. Test Witnessed By: Mr. A.K. Damawale Sign: Test Conducted By: Mr. Shrikant Sign: Lab Test Report N N.A. Date : 24.04.01 Organisation : Dodsal Pte Ltd. Format No : DOD/Q-Chem/F043 Rev. 0 DOD/WQT/ c:\DIR00001\wpq\wpq 200.xls

Upload: rohitbhat2345

Post on 22-Oct-2015

5 views

Category:

Documents

2 download

Report

Download

Embed Size (px):

TRANSCRIPT

Dodsal Pte Ltd

Q-Chem Project

Doha, Qatar

Job No 7979

QW 484-RECORD OF WELDER QUALIFICATION TESTS(SEE ASME BPV CODE SECTION IX)

Welder Name : Sukumara Pillai Stamp No : D083Using WPS No : WPS/7979/PP/04 Rev. : 1 Date 15.10.2000

Photo

VARIABLE ACTUAL VALUES QUALIFICATION RANGE

Process GTAW GTAWProcess Type Manual ManualBacking (metal,weld metal,flux With Backing for subsequent pass With Backing for subsequent pass

etc.)(QW-402)Material Specifications (QW-403) P1-P1 P1-P11 Thickness - Groove 5.54mm 11.08mm Max deposited weld metal

- Fillet N.A. All Diameter - Groove 2" NB Sch 80 3/4" NB and Over -Fillet N.A. AllFiller Metal (QW-404)Specification Number - Class ER 70-S2 N.A. - SFA Number 5.18 N.A. - F Number 6 All F-No 6

Weld deposit Thickness for each Process 5.54mm 11.08mm Max deposited weld metal

Position (QW-405) 6G All Weld Progression (QW-410) Uphill UphillGas Type (QW-408) N.A. N.A.Gas Backing N.A. N.A.Electrical Characteristics (QW-409) - Current DC DC - Polarity Straight Straight

Guided Bend Test Results QW-462(a), QW-462.3(b)Identification No. Type of Bend Mandrel Dia. Angle of Bend Test Result

F1 Face Bend 4T 180 N.A.F2 Face Bend 4T 180 N.A.R1 Root Bend 4T 180 N.A.R2 Root Bend 4T 180 N.A.

Radiographic Test Results (QW-304 & QW-305)Radiographic Results : Al-Misnad Report No :696 Dated 19.04.01

Fillet Weld Test Results. See QW-462.4(a) & QW-462(b)Length & Percent of Defects : N.A. mm N.A. %Macro Test Fusion : N.A.Appearance Fillet Size(leg) : N.A. x N.A. Convexity N.A. mm

or Concavity N.A. mmWe certify that the statement in this record are correct and that the test coupons were prepared, welded and tested in accordance with the requirements of sections IX of the ASME code.Test Witnessed By: Mr. A.K. Damawale Sign:

Test Conducted By: Mr. Shrikant A Sign: Lab Test Report No. N.A.

Date : 24.04.01 Organisation : Dodsal Pte Ltd. KBRT

Format No : DOD/Q-Chem/F043 Rev. 0 DOD/WQT/200

c:\DIR00001\wpq\wpq 200.xls

Wigan Pier Quarter Vision - Residents · 3 FOREWORD Wigan Pier Quarter (WPQ) is an iconic collection of buildings located on the Leeds

- WORK CHECKLIST Assessment Is the inspection area safety ... Interpretation and Verification of conformity to specs of WPS, PQR, WPQ and NDT Controls (RT,

Maintenance Customized Service” Speed ... · • Reading, Interpretation and Verification of conformity to specs of WPS, PQR, WPQ and NDT Controls (RT, UT, LP, MT), verification

C-specWeldOffice® Software Select.weldoffice.com/documentation/howto/Create a WPQ.pdf · C-spec P.O.Box27604,Concord,CA94527,(888)673-9777 ASMESectionIX-WelderPerformanceQualification(WPQ)

13.5 13.2 16.8 kg 4.0 4.0 100 200 100 200 100 200 200 200 200 200 200 100 200 100 200 100 200 200 200 200 200 200 200 29.5 29.5 29.5 CMPI- CMPI- CMP1-50.2R-v CMP6 CMPI- 50.2R CMPI-

t.m. Comas · Soldaduras según procedimientos y cualificaciones (WPS, WPQR, WPQ) bajo demanda Weldings following procedures and qualifications (WPS, WPQR, WPQ) ... Análisis de materiales

WPQ Manager HU V.1 · Kezelési- és karbantartási utasítás HU Szoftver WPS létrehozásához és kezeléséhez WPQ Manager V.1.3 099-008813-EW511 A kiegészítő rendszerdokumentációkban

WPS / PQR / WPQ 양식