wp-ac belt power - belt driven 230v generator marine
TRANSCRIPT
smar t energy so lu t ions
- Heavy-duty system to generate 230 VAC/50 Hz- Stable, sine wave power at variable speed- Compact & easy to install- High efficient & compact generator solution- Suitable to operate with Combi’s
DatasheetWP-AC Belt Power - Belt Driven 230V Generatormarine • mobile
3.5 kW - 5 kW - 230 VAC/50 Hz
smar t energy so lu t ions
Beltpower Art. Nr. 41301000 41302000
Specifications W-BD 3.5 W-BD 5
Power (continuous) 3500 W 5000 W
Max current (continuously) 16 A 27 A
Max. inrush current (320 ms) 32 A 40 A
Voltage 230 VAC 230 VAC
Frequency 50 Hz 50 Hz
Inverter box
Dimensions (h*w*d) 376*323*127 mm (app.)
Net weight 9.6 Kg 9.6 Kg
Efficiency 95% 95%
Generator
Net weight 6.9 Kg 6.9 Kg
Dimensions (h*w*d) 159*178*190 mm
Voltage 200-340 VAC 3 phase
Field voltage 14.4 VDC 14.4 VDC
Remote Control Panel
Dimensions (h*w*d) 116*79*19 mm
2809
2012
data
shee
tBEL
Tp
How it works The WhisperPower W-BD alternator is designed for installation in the vehicle’s or boat’s engine compartment and has to be driven by a belt of one of the engine’s pulley. In most cases an additional pulley has to be installed. The alternator’s output is connected to an inverter/power supply, which converts the variable incoming current into a stable sine wave 230 VAC 50 Hz.
Standard Pulleys and Pulleys to client specification Depending on the vehicle model, mounting brackets to mount the generator on the engine could be available or can be specially designed
Safety alarmsShort circuit, overload, over temperature, low/high rpm, low/high voltage
Determine the pulley diameter designThe graphs show the available AC power corresponding to the generator speed. The speed of 2 pulleys relate to each other proportional to the diameter of the pulleys. First one need to know the engine speed = crankshaft speed when idling and at full speed. When the drive pulley is not on the crankshaft the rpm of the pulley drive shaft must be determined. The pulleys should be selected in such a way that at low speed the generator can bring the power required. However the max. speed must not exceed 15000 RPM.
Attention! The W-BD5 model needs 6500 RPM to generate 5 kW. Compared with the W-BD 3.5 the 5 kW model will also need more RPM (3200) to generate 1 kW. Refer to the graph.
WhisperPower BV Kelvinlaan 82, 9207 JB Drachten, The Netherlands, Tel: +31 (0) 512 571 550, Fax: +31 (0) 512 571 599, [email protected], www.whisperpower.com
020040060080010001200140016001800200022002400260028003000320034003600
RPM
WATT
2000 2500 3000 3500 4000 4500 5000 5500 6000 6500 7000
0
400
800
1200
1600
2000
2400
2800
3200
3600
4000
4400
4800
5200
RPM
WATT
2000 2500 3000 3500 4000 4500 5000 5500 6000 6500 7000 7500 8000 8500 9000
020040060080010001200140016001800200022002400260028003000320034003600
RPM
WATT
2000 2500 3000 3500 4000 4500 5000 5500 6000 6500 7000
0
400
800
1200
1600
2000
2400
2800
3200
3600
4000
4400
4800
5200
RPM
WATT
2000 2500 3000 3500 4000 4500 5000 5500 6000 6500 7000 7500 8000 8500 9000
Remote panel for Belt Power, with various settings
Pulley
Speed/power diagram W-BD 3.5 (3.5 kW) Speed/power diagram W-BD 5 (5 kW)
Installation drawing W-BD generator