world class hi fi - music-line.biz · 1 introduction this connection guide, available only in adobe...
TRANSCRIPT
W O R L D C L A S S H I F I
C O N N E C T I O N G U I D E
Equipment Connection Panels and System Connection Schematics
I S S U E 1
1
IntroductionThis connection guide, available only in Adobe PDF format, collects togetherillustrations of product connection panels and many of the most often used systemconnection diagrams. Most illustrations and diagrams can also be found in theappropriate product Owners Manual. This guide should not be seen as a replacementfor specific Owners Manuals as these contain important safety and installationinformation as well as comprehesive installation and operation guidance
CONTENTSSection Page
1 2 CD Players1.1 CDS3 1.2 CDX21.3 CD5
3 1.4 CDS3/XPS21.5 CDX2/XPS2
4 1.6 CD5/Flatcap 2
2 5 Tuner2.1 NAT 05
3 6 Headphone Amplifier3.1 Headline3.2 Headline/Hi-Cap
4 7 Phono Stage4.1 Stageline4.2 Stageline/NAC 1124.3 Stageline/Flatcap 2
5 8 Preamplifiers5.1 NAC 5525.2 NAC 252
9 5.3 NAC 2825.4 NAC 202
10 5.5 NAC 112
11 5.6 NAC 552/NAC 552PS5.7 NAC 252/Supercap
12 5.8 NAC 282/Supercap5.9 NAC 282/Hi-Cap
13 5.10 NAC 202/Hi-Cap5.11 NAC 112/Flatcap 2
6 14 AV Processor6.1 AV2
15 6.2 AV2/NAP 150/NAP V175
16 6.3 AV2/NAC 112/NAP 150/NAP V175
7 17 Integrated Amplifier7.1 NAIT 5
7.2 NAIT 5/Flatcap 2
18 7.3 NAIT 5/NAP 1507.4 NAIT 5/Flatcap 2/NAP 150
Section Page
8 19 Power Amplifiers8.1 NAP 500
20 8.2 NAP 3008.3 NAP 250
21 8.4 NAP V1458.5 NAP 2008.6 NAP 150
22 8.7 NAP 6-508.8 NAP V175
9 23 Power Supplies9.1 XPS29.2 Supercap9.3 Hi-Cap
24 9.4 Flatcap 29.5 NAPSC
25 9.6 NAC 252/Supercap/Hi-Cap
26 9.7 NAC 282/NAPSC/Supercap x 2
27 9.8 NAC 282/NAPSC/Hi-Cap9.9 NAC 282/NAPSC/Hi-Cap x 2
28 9.10 NAC 202/Hi-Cap/NAPSC9.11 NAC 112/Flatcap x 2
10 29 Active Crossovers10.1 SNAXO 36210.2 SNAXO 242
10.3 SNAXO 362/Supercap
30 10.4 SNAXO 242/Hi-Cap
31 10.5 SNAXO 362/NAP 300 x 3
32 10.6 SNAXO 362/NAP 250 x 3
33 10.7 SNAXO 242/NAP 250 x 2
CD5
CDX2
CDS3
CD Players
to preamplifierXPS2 power supply connection socket
ch1out
-ve
ncncch2
out
CDS3 Output
1.1 CDS3 Connection Panel
alternativeRCA phono
output sockets
RC5 input
NoteThe RC5 input fitted to the CDS3 is intended to accept external control signals for multi-room applications. Contact your dealer for further information on its use.
optionalRS232data port
to preamplifiermainsinput
power link plug fitted
ch1out
-ve
ncncch2
out
CDX2 Output
1.2 CDX2 Connection Panel
alternativeRCA phono
output sockets
RC5 input
NoteThe RC5 input fitted to the CDX2 is intended to accept external control signals for multi-room applications. Contact your dealer for further information on its use.
optionalRS232data port
ch1out
-ve
ncncch2
out
CD5 Output
1.3 CD5 Connection Panel
to preamplifiermains inputpower
link plug fitted
RC5 input
NoteThe RC5 input fitted to the CD5 is intended to accept external control signals for multi-roomapplications. Contact your dealer for further information on its use.
The CD5 features various technologies to reduce microphonic effects, in particular acompliant mounting for the main circuit boards and the DIN sockets on the rear. Somemovement of the board and sockets when connecting/disconnecting is normal.
2
XPS2
CDX2
CDS3
CD Players
mains input
CDS3/XPS2 Burndy
180° 5 to 5 pin DIN
Interconnect Cablescabledirectionmarker
1.4 CDS3 Connected to XPS2 Power Supply
XPS2
CDS3
mains input
Note When used with an XPS2 the CDX2 must be disconnectedfrom the mains. Always switch off the CDX2 whenconnecting or disconnecting an XPS2.
1.5 CDX2 Connected to XPS2 Power Supply
XPS2
CDX2
3
Flatcap 2
CD5
1.6 CD5 Connected to Flatcap 2 Power Supply
mains input
link plug removed
mains inputpower
Flatcap 2
CD5
cabledirectionmarker
240° 5 to 5 pin DIN
Interconnect Cables
CD Players
4
power
NAT 05Tuners
2.1 NAT 05 Connection Panel
to preamplifiermains inputpower
NoteThe RC5 input fitted to the NAT 05 is intended to accept external control signals for multi-room applications. Contact your dealer for further information on its use.
The NAT 05 features various technologies to reduce microphonic effects, in particular acompliant mounting for the main circuit boards and the DIN sockets on the rear. Somemovement of the board and sockets when connecting/disconnecting is normal.
75 ohm FM aerialRC5 input
ch1out
-ve
ncncch2
out
NAT 05 Output
5
cabledirectionmarker
180° 5 to 5 pin DIN
Interconnect Cables
6
Hi-Cap
Headline
3.1 Headline Connection Panel
3.2 Headline connected to Hi-Cap power supply
Headphone Amplifier
flying signal cable
mains input
Hi-Cap
from powersupply (NAPSC)or better)
Connect to:NAC 552, NAC 252,NAC 282, NAC 202:Socket 4, 5 or 6.NAC 112, NAIT 5:Socket 3, 4 or 5.
Headline
Captive 180° 5 pin DIN
5 pin DIN - 2 pin (SLIC)
Interconnect Cables
7
Flatcap 2
NAC 112
Stageline
4.1 Stageline Connection Panel
Phono Stage
RCA phonosockets andearth tag
to preamplifier powersupply or NAC 112/NAIT 5AUX 2b socket
to preamplifier. 4 to 5 pinDIN interconnect required
4.2 Stageline connected to NAC 112 (or NAIT 5)
4.3 Stageline connected to Flatcap 2
cabledirectionmarker
240° 5 to 5 pin DIN
4 to 5 pin DIN
Interconnect Cables
power
Flatcap 2
NAC 112
Stageline
Stageline
mains input
8
NAC 252
NAC 552
Preamplifiers
5.1 NAC 552 Connection Panel
5.2 NAC 252 Connection Panel
in 1 in 2 in 3 in 4 in 5 in 6 in 8ch 1ch 2
signal ground in 9ch 1ch 2
NAC 552PS in
in 7 rc5 control in NAC 552PS in
ch1in
-ve
ch2in
Inputs 1, 2 & 3
ch1in
ch1outch2out
-ve
ch2in
Inputs 4, 5 & 6
+ve +vech1
-ve
ch2
Input 7
in 1cd
in 2tuner
in 3tape
in 4a/v
in 5aux 1
in 6aux 2
cdphonoch 1ch 2
signalground
aux 2phonoch 1ch 2
Supercapin
rc5 control inSupercap in
ch1in
-ve
ch2in
Inputs 1, 2 & 6
ch1in
ch1outch2out
-ve
ch2in
Inputs 3, 4 & 5
+ve +vech1
-ve
ch2
Input 6(alternative)
in 6 (alternative) optionalRS232 dataport
Note The NAC 252 AUX 2 input is provided with two sockets. Thelower socket, fitted on delivery with a blanking cover, isintended for use with a Stageline or Prefix phono stage andincorporates an appropriate DC power supply. The twosockets must not be used simultaneously.
9
NAC 202
NAC 282
5.4 NAC 202 Connection Panel
Preamplifiers
5.3 NAC 282 Connection Panel
in 1cd
in 2tuner
in 3tape
in 4a/v
in 5 aux 1in 6 aux 2
cdphonoch 1ch 2
signalground
aux 2phonoch 1ch 2
rc5 control into NAPSC
Power supply/outputoption sockets withlink and blankingplugs fitted
in 6 (alternative) to poweramplifier withpreamplifierpower supply
Note The NAC 282 AUX 2 input is provided with two sockets. Thelower socket, fitted on delivery with a blanking cover, isintended for use with a Stageline or Prefix phono stage andincorporates an appropriate DC power supply. The twosockets must not be used simultaneously.
optionalRS232 dataport
ch1in
-ve
ch2in
Inputs 1, 2 & 6
ch1in
ch1outch2out
-ve
ch2in
Inputs 3, 4 & 5
+ve +vech1
-ve
ch2
Input 6(alternative)
in 1cd
in 2tuner
in 3tape
in 4a/v
signalground
in 6(alternative)
cdphonoch 1ch 2
in 5aux 1
aux 2phonoch 1ch 2
rc5 control into NAPSC(optional)
Power supply/outputoption sockets with
link and blankingplugs fitted
ch1in
-ve
ch2in
Inputs 1, 2 & 6
ch1in
ch1outch2out
-ve
ch2in
Inputs 3, 4 & 5
+ve +vech1
-ve
ch2
Input 6(alternative)
in 6aux 2
to poweramplifier withpreamplifierpower supply
Note The NAC 202 AUX 2 input is provided with two sockets. Theupper socket, fitted on delivery with a blanking cover, isintended for use with a Stageline or Prefix phono stage or aHeadline headphone amplifier and incorporates anappropriate DC power supply. The two sockets must not beused simultaneously.
optionalRS232 dataport
cabledirectionmarker
4 to 4 pin DIN
Interconnect Cables
10
NAC 112Preamplifiers
ch1in
ch1outch2out
-ve
ch2in
ch1in
ch2in
TAPE, AV & AUX 1Inputs
ncnc
-ve
CD, TUNER & AUX 2 Inputs
Note The NAC 112 AUX 2 input is provided with two sockets. Theleft hand socket, fitted on delivery with a blanking cover, isintended for use with a Stageline or Prefix phono stage or aHeadline headphone amplifier and incorporates anappropriate DC power supply. The two sockets must not beused simultaneously.
cd tuner tape av aux 1 aux 2 to stereo power amplifier withpreamplifier power supply output
power supply/output option socket with link and blanking plug fitted5.5 NAC 112 Connection Panel
11
NAC 252
Supercap
NAC 552PS
NAC 552
Preamplifiers
5.6 NAC 552 connection to NAC 552PS power supply
NAC 552 Burndy
NAC 252 Burndy
240° 5 to 5 pin DIN
Interconnect Cables
cabledirectionmarker
mains in to stereo poweramplifier
to mono or dualmono power
amplifiers
additional signaloutput
Note For best performance the Burndy and 5 pin DIN cablesshould be run as close together as possible.
Note For best performance the Burndy and 5 pin DIN cablesshould be run as close together as possible.
NAC 552
NAC 552PS
mains input
to stereo power amplifier
to mono or dual mono power amplifiersadditional signal output
Supercap
NAC 252
5.7 NAC 252 connection to Supercap power supply
12
Hi-Cap
Supercap
NAC 282
Preamplifiers
5.9 NAC 282 connection to Hi-Cap power supply
cabledirectionmarker
mains input
to stereo power amplifier
additional signal output
to mono or dual monopower amplifiers
to NAPSC
Hi-Cap
NAC 282
240° 5 to 5 pin DIN
Interconnect Cables
5.8 NAC 282 connection to Supercap power supply to NAPSC
Note NAC 282 can also be powered by two Hi-Cap supplies. Inthis case they are connected to the same sockets as thetwo Supercap power supply cables.
Note See Page 27 for NAC 282 with multiple Hi-Caps.
NAC 282
mains input
additional signaloutput
to mono or dual monopower amplifiers
to stereopower amplifiers
Supercap
Note NAC 202 may also be powered by Supercap or Flatcap 2power supplies connected in a similar manner to the Hi-Cap.
13
NAC 112
Flatcap 2
Hi-Cap
NAC 202
cabledirectionmarker
240° 5 to 5 pin DIN
Interconnect Cables
Preamplifiers
5.10 NAC 202 connection to Hi-Cap power supply
mains input
to stereo power amplifier
additional signal output
to mono or dual mono power amplifiers
to NAPSC (optional)
Note The NAPSC socket to 4pin DIN link plug mustremain in place if noNAPSC is used.
NAC 202
Hi-Cap
5.11 NAC 112 connected to FLATCAP 2 power supply
power mains inputfor CD5, Headline orStageline. Additionalinterconnectsrequired.
to stereo poweramplifier
to mono or dualmono poweramplifiers
NAC 112
Flatcap 2
14
AV2AV Processor
6.1 AV2 Connection Panel
ch1in
-ve
ch2in
Analog in 3
mainsin
power rearout
ch1nc
ch2-ve
Rear out
cennc
sub-ve
Centre out
ch1nc
ch2-ve
Surround out
ch1nc
ch2-ve
Front out
centre(sub)
outsurr’d
outfrontout
subout
rc5in
digout
2
digin2
digoptout
digopt
in 2
digopt
in 1
recout
analogin 6
analogin 5
analog in 4
digout
1
digin1
datain/outrs232
videoswitchin/out
ch1left
ch2right
analogin 3(sys out)
analogin 1(versatile)
analogin 2(versatile)
frontoutch1ch2
ch1in
-ve
ch2in
Analog in VI2
ch1in
-ve
ch2in
Analog in VI1
cenin
-ve
subin
Analog in VI2 and VI1 - multiple mode
V2 V1
rearin
ch1ch2
-ve
surr’din
ch1ch2
frontin
ch1ch2
Note The AV2 features various technologies to reducemicrophonic effects, in particular a compliant mounting forthe main circuit boards and the DIN sockets on the rear.Some movement of the board and sockets whenconnecting/disconnecting is normal.
15
NAP 150
NAP V175
AV2
AV Processor
+ - - +
+ - - + - +
AV2
NAP V175
NAP 150
to sub-woofer
surround ch1, left
centre surround ch2, right
front ch1, left
front ch 2, right
6.2 AV2 connected to NAP V175 and NAP 150
cabledirectionmarker
4 to 4 pin DIN
Interconnect Cables
mainsin
power
mainsin
power
mainsin
power
+ - - +NAP 150
rear effects ch1, left
rear effects ch 2, right
mainsin
power
With extra NAP 150 for 7.1 applications
16
NAP 150
NAP V175
NAC 112
AV2
AV Processor
6.3 AV2 connected to NAC 112, NAP 150 and NAP V175
cabledirectionmarker
4 to 4 pin DIN
180° 5 to 5 pin DIN
(AV2/NAC 112 special)
Interconnect Cables
link plug and cover fitted
AV2
NAP V175
NAP 150
NAC 112
to sub-woofer
surround ch1, left
centre surround ch2, right
front ch1, left
front ch 2, right
+ - - + - +
+ - - +
mainsin
power
mainsin
power
mainsin
power
17
Flatcap 2
NAIT 5
Integrated Amplifier
7.1 NAIT 5 Connection Panel
cabledirectionmarker
4 to 4 pin DIN
240° 5 to 5 pin DIN
Interconnect Cables
ch1in
ch1outch2out
-ve
ch2in
Tape, A/V, AUX 1,inputs
ch1 ncnc
-ve
ch2
CD, Tuner & Aux2 inputs
+V in +V in
ch1
-ve
ch2
Signal out A
mains input
power to leftloudspeaker ch1 to right
loudspeaker ch2
input signalout A
signalout B
aux 2 aux 1 av tape tuner cd
link plugs fitted
+ - - +
mainsinput
power
link plug fitted
+ - - +
7.2 NAIT 5 connected to Flatcap 2 power supply
mainsinput
power
Flatcap 2
NAIT 5
for CD5, Headlineor Stageline.Additionalinterconnectsrequired.
18
Flatcap 2
NAP 150
NAIT 5
Integrated Amplifier
7.3 NAIT 5 connected to NAP 150 power amplifier
link plug and cover fitted
+ - - +
mainsinput
speakersch1 left
speakersch2 right
power
NAP 150
NAIT 5
+ - - +
mainsinput
speakersch1 left
speakersch2 right
power
NAP 150
cabledirectionmarker
4 to 4 pin DIN
240° 5 to 5 pin DIN
Interconnect Cables
link plug removed, cover fitted
7.4 NAIT 5 connected to Flatcap 2 power supply and NAP 150 power amplifier
mainsinput
power
Flatcap 2
NAIT 5
Note Mains power must not be connected to the NAIT 5 when itis used as a preamplifier (i.e. powered externally).
Note Mains power must not be connected to the NAIT 5 when itis used as a preamplifier (i.e. powered externally).
19
NAP 500PS
NAP 500
Power Amplifiers
8.1 NAP 500 and NAP 500PS Connection Panels
- ++ -
Input Socket 1 Input Socket 2
topreamplifier
power supply.Left, ch1.
to preamplifierpower supply.Right, ch2.
leftspeaker ch1
rightspeaker ch2
ch1 -ve -ve
nc
nc
ch2
mains in
1 2
NAP 500
NAP 500PS
NAP 500 Burndy
Interconnect Cablescabledirectionmarker
20
NAP 250
NAP 300PS
NAP 300
Power Amplifiers
8.2 NAP 300 and NAP 300PS Connection Panels
8.3 NAP 250 Connection Panel
mains in
leftspeaker ch1
-+
rightspeaker ch2
topreamplifierpowersupply.Right, ch2.
- +
topreamplifierpowersupply.Left, ch1.
1 2
Input Socket 1 Input Socket 2
ch1 -ve -ve
nc
nc
ch2
NAP 300
NAP 300PS
ch2
-vech1
Input socket
mains in leftspeaker ch1
-+
rightspeaker ch2
to preamplifier powersupply
- +
NAP 300 Burndy
Interconnect Cablescabledirectionmarker
21
NAP 150
NAP 200
NAP V145
Power Amplifiers
8.4 NAP V145 Connection Panel
-vei/p
Input socket
mains inspeaker output
to preamplifierpower supply
- +
ch1
-ve
+vech2
Input socket
ch1
-ve
+vech2
Input socket
mains in leftspeaker ch1
-+right
speaker ch2to preamplifier or
power supply
- +
+ - - +
mainsin
power to preamplifier orpower supply
leftspeaker ch1
rightspeaker ch2
8.5 NAP 200 Connection Panel
8.6 NAP 150 Connection Panel
22
NAP V175
NAP 6-50
Power Amplifiers
8.7 NAP 6-50 Connection Panel
8.8 NAP V175 Connection Panel
mainsinput
power to processor
ch1nc
ch2-ve
Input Socket 2
cennc
nc-ve
Input Socket 1
+ - - + - +
1 2
leftspeaker
ch1centre
speaker
rightspeaker
ch2
mains input fanventilation inlet
trigger
- + - + - +
- + - + - +
ch1
chassisground
ch2-ve
Input Sockets
zone 1speaker ch1, left
zone 1speaker
ch2, right
zone 2speaker
ch2, right
zone 3speaker
ch2, right
zone 2speaker ch1, left
zone 3speakerch1, left
zone 3
zone 1
zone 2
23
Hi-Cap
Supercap
XPS2
Power Supplies
9.1 XPS2 Connection Panel
9.2 Supercap Connection Panel
9.3 Hi-Cap Connection Panel
mains input to CDS3, CDS2,CDX or CDX2
Note When used with an XPS2 the CDX2 (or CDX) must bedisconnected from the mains. Always switch off the playerwhen connecting or disconnecting an XPS2.
ch1nc
-ve
ch2
Sockets 3, 4, 5
+vech1
ch2
-ve+ve
Socket 1
1
2
3 4 5
6
7
Socket 2
+venc
nc
-ve+ve
Socket 6
NAC 252 only
Socket 7
NAC 252 orSNAXO only
mains input
mains input
ch1nc
-ve
ch2
Sockets 1, 2, 3
+vech1
ch2
-ve+ve
Socket 4
1 2 3 4
24
NAPSC
Flatcap 2
Power Supplies
9.4 Flatcap 2 Connection Panel
9.5 NAPSC Connection Panel
power
1 2 3 4 5 6
ch1nc
ch2-ve
Sockets 2, 3, 4, 6 Sockets 1, 5
+vech1
-ve
+vech2
NoteThe Flatcap 2 features various technologies to reducemicrophonic effects, in particular a compliant mounting for themain circuit boards and the DIN sockets on the rear. Somemovement of the board and sockets whenconnecting/disconnecting is normal.
mains input
mains inputoutput flyinglead
25
Hi-Cap
Supercap
NAC 252
Power Supplies
9.6 NAC 252 connection to Supercap power supply
cable
direction
marker
4 to 4 pin DIN
240° 5 to 5 pin DIN
Burndy
Interconnect Cables
Note Extra Supercap, Hi-cap or Flatcap 2 for SNAXO. Supercap -socket 5, Hi-cap - socket 3, Flatcap 2 - socket 2.
to SNAXOmains input
Hi-Cap
Note For best performance theBurndy and 5 pin DINcables should be run asclose together aspossible.
mains input
to stereo power amplifier(not in active systems)
to mono or dual mono poweramplifiers (not in active systems)
additional signal output
Supercap
NAC 252
26
Supercap
NAPSC
NAC 282
Power Supplies
9.7 NAC 282 connection to NAPSC and Supercap power supply
mains input
NAPSC
With extra Supercap for SNAXO
cabledirectionmarker
4 to 4 pin DIN
240° 5 to 5 pin DIN
Interconnect Cables
NAC 282
mains input
to stereo power amplifiers(not in active systems)
Supercap
mains input to SNAXO
Supercap
to mono or dual mono poweramplifiers (not in active systems)
27
NAPSC
Flatcap 2
Hi-Cap
NAC 282
Power Supplies
9.8 NAC 282 connection to Hi-Cap and NAPSC power supplies
9.9 NAC 282 connection to two Hi-Caps (or Flatcap 2s)
mains input
With extra Flatcap 2 (or Hi-cap) for SNAXO
power mains inputto SNAXO (using external
power supply)for CD5, Headline or Stageline.
Additional interconnects required
cabledirectionmarker
mains input
to stereo power amplifier
to mono or dual monopower amplifiers
4 to 4 pin DIN
240° 5 to 5 pin DIN
Interconnect CablesHi-Cap
NAC 282
mainsinput
to stereo power amplifier(not in active systems)
to mono or dual monopower amplifiers (not in
active systems)
to NAPSC
Hi-Cap Hi-Cap
Flatcap 2
NAC 282
mains input
NAPSC
28
NAPSC
NAC 112
Flatcap 2
Hi-Cap
NAC 202
mains input
to stereo power amplifier
to mono or dual monopower amplifiers
NAC 202
Hi-Cap
cabledirectionmarker
4 to 4 pin DIN
240° 5 to 5 pin DIN
Interconnect Cables
to SNAXO
power mains inputfor CD5, Headline orStageline. Additionalinterconnects required.
for CD5, Headline orStageline. Additionalinterconnects required.
power mains input
With extra Flatcap 2 for SNAXO
Flatcap 2
Flatcap 2
NAC 112
mains input
NAPSC
Power Supplies
9.10 NAC 202 connection to Hi-Cap and NAPSC power supplies
9.11 NAC 112 connection to Flatcap 2 power supply
cover fitted
29
Supercap
SNAXO 242
SNAXO 362
Active Crossovers
10.1 SNAXO 362 Connection Panel
10.2 SNAXO 242 Connection Panel
10.3 SNAXO 362 Connected to Supercap power supply
ch1nc
-ve
ch2
Output Sockets
+ve
ch2
-ve+ve
Input/PSU Socket
B
A
LF HF
input/power supply socketoutput sockets Supercap powersupply only
ch1
NoteA and B output socketsare identical.
ch1nc
-ve
ch2
Output Sockets
+ve
ch2
-ve+ve
Input/PSU Socket
B
A
LF MF HF
input/power supply socketoutput Sockets Supercap Powersupply only
ch1
NoteA and B output socketsare identical.
mains input from preamplifier power supply
Supercap
SNAXO
Burndy
4 to 4 pin DIN
Interconnect Cablescabledirectionmarker
30
Hi-Cap
SNAXO 242
Active Crossovers
10.4 SNAXO 242 Connected to Hi-Cap power supply
SNAXO
mainsinput
Hi-cap
from preamplifierpower supply
Link Plugin place
cabledirectionmarker
4 to 4 pin DIN
240° 5 to 5 pin DIN
Interconnect Cables
31
NAP 300
SNAXO 362
Active Crossovers
10.5 SNAXO 362 connected to three NAP 300 power amplifiers
leftspeaker HF
-+
rightspeaker HF
- +
leftspeaker MF
-+
rightspeaker MF
- +
leftspeaker LF
-+
rightspeaker LF
- +
SNAXO
NAP 300
NAP 300
NAP 300
cable
direction
marker4 pin DIN to XLR (Left)
4 pin DIN to XLR (Right)
Interconnect Cables
NotesLeft and right handed DIN to XLR cables are required.Power amplifier power supplies are not shown.Connection to three NAP 500s follows the same principle.
32
NAP 250
SNAXO 362
Active Crossovers
10.6 SNAXO 362 connected to three NAP 250 power amplifiers
mains in leftspeaker LF
-+
rightspeaker LF
- +
mains in leftspeaker MF
-+
rightspeaker MF
- +
mains in leftspeaker HF
-+
rightspeaker HF
- +
NAP 250
NAP 250
NAP 250
SNAXO
cable
direction
marker 4 pin DIN to XLR
Interconnect Cables
33
NAP 250
SNAXO 242
Active Crossovers
10.7 SNAXO 242 connected to two NAP 250 power amplifiers
mains in leftspeaker LF
-+
rightspeaker LF
- +
mains in leftspeaker HF
-+
rightspeaker HF
- +
NAP 250
NAP 250
SNAXO
cable
direction
marker 4 pin DIN to XLR
Interconnect Cables
NoteConnection to two NAP 200s or NAP 150s follows thesame principle but with 4 pin DIN to 4 pin DIN cables.
Naim Audio Limited, Southampton Road, Salisbury, England SP1 2LNTelephone: +44 (0) 1722 332266 Fax: +44 (0) 1722 412034 www.naim-audio.com
Drawing No. NA601001-401